| /* |
| * composite.c - infrastructure for Composite USB Gadgets |
| * |
| * Copyright (C) 2006-2008 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/kallsyms.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/utsname.h> |
| |
| #include <linux/usb/composite.h> |
| #include <asm/unaligned.h> |
| |
| /* |
| * The code in this file is utility code, used to build a gadget driver |
| * from one or more "function" drivers, one or more "configuration" |
| * objects, and a "usb_composite_driver" by gluing them together along |
| * with the relevant device-wide data. |
| */ |
| |
| /* big enough to hold our biggest descriptor */ |
| #define USB_BUFSIZ 1024 |
| |
| static struct usb_composite_driver *composite; |
| static int (*composite_gadget_bind)(struct usb_composite_dev *cdev); |
| |
| /* Some systems will need runtime overrides for the product identifiers |
| * published in the device descriptor, either numbers or strings or both. |
| * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). |
| */ |
| |
| static ushort idVendor; |
| module_param(idVendor, ushort, 0); |
| MODULE_PARM_DESC(idVendor, "USB Vendor ID"); |
| |
| static ushort idProduct; |
| module_param(idProduct, ushort, 0); |
| MODULE_PARM_DESC(idProduct, "USB Product ID"); |
| |
| static ushort bcdDevice; |
| module_param(bcdDevice, ushort, 0); |
| MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); |
| |
| static char *iManufacturer; |
| module_param(iManufacturer, charp, 0); |
| MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); |
| |
| static char *iProduct; |
| module_param(iProduct, charp, 0); |
| MODULE_PARM_DESC(iProduct, "USB Product string"); |
| |
| static char *iSerialNumber; |
| module_param(iSerialNumber, charp, 0); |
| MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); |
| |
| static char composite_manufacturer[50]; |
| |
| /*-------------------------------------------------------------------------*/ |
| /** |
| * next_ep_desc() - advance to the next EP descriptor |
| * @t: currect pointer within descriptor array |
| * |
| * Return: next EP descriptor or NULL |
| * |
| * Iterate over @t until either EP descriptor found or |
| * NULL (that indicates end of list) encountered |
| */ |
| static struct usb_descriptor_header** |
| next_ep_desc(struct usb_descriptor_header **t) |
| { |
| for (; *t; t++) { |
| if ((*t)->bDescriptorType == USB_DT_ENDPOINT) |
| return t; |
| } |
| return NULL; |
| } |
| |
| /* |
| * for_each_ep_desc()- iterate over endpoint descriptors in the |
| * descriptors list |
| * @start: pointer within descriptor array. |
| * @ep_desc: endpoint descriptor to use as the loop cursor |
| */ |
| #define for_each_ep_desc(start, ep_desc) \ |
| for (ep_desc = next_ep_desc(start); \ |
| ep_desc; ep_desc = next_ep_desc(ep_desc+1)) |
| |
| /** |
| * config_ep_by_speed() - configures the given endpoint |
| * according to gadget speed. |
| * @g: pointer to the gadget |
| * @f: usb function |
| * @_ep: the endpoint to configure |
| * |
| * Return: error code, 0 on success |
| * |
| * This function chooses the right descriptors for a given |
| * endpoint according to gadget speed and saves it in the |
| * endpoint desc field. If the endpoint already has a descriptor |
| * assigned to it - overwrites it with currently corresponding |
| * descriptor. The endpoint maxpacket field is updated according |
| * to the chosen descriptor. |
| * Note: the supplied function should hold all the descriptors |
| * for supported speeds |
| */ |
| int config_ep_by_speed(struct usb_gadget *g, |
| struct usb_function *f, |
| struct usb_ep *_ep) |
| { |
| struct usb_endpoint_descriptor *chosen_desc = NULL; |
| struct usb_descriptor_header **speed_desc = NULL; |
| |
| struct usb_ss_ep_comp_descriptor *comp_desc = NULL; |
| int want_comp_desc = 0; |
| |
| struct usb_descriptor_header **d_spd; /* cursor for speed desc */ |
| |
| if (!g || !f || !_ep) |
| return -EIO; |
| |
| /* select desired speed */ |
| switch (g->speed) { |
| case USB_SPEED_SUPER: |
| if (gadget_is_superspeed(g)) { |
| speed_desc = f->ss_descriptors; |
| want_comp_desc = 1; |
| break; |
| } |
| /* else: Fall trough */ |
| case USB_SPEED_HIGH: |
| if (gadget_is_dualspeed(g)) { |
| speed_desc = f->hs_descriptors; |
| break; |
| } |
| /* else: fall through */ |
| default: |
| speed_desc = f->descriptors; |
| } |
| /* find descriptors */ |
| for_each_ep_desc(speed_desc, d_spd) { |
| chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; |
| if (chosen_desc->bEndpointAddress == _ep->address) |
| goto ep_found; |
| } |
| return -EIO; |
| |
| ep_found: |
| /* commit results */ |
| _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize); |
| _ep->desc = chosen_desc; |
| _ep->comp_desc = NULL; |
| _ep->maxburst = 0; |
| _ep->mult = 0; |
| if (!want_comp_desc) |
| return 0; |
| |
| /* |
| * Companion descriptor should follow EP descriptor |
| * USB 3.0 spec, #9.6.7 |
| */ |
| comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd); |
| if (!comp_desc || |
| (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP)) |
| return -EIO; |
| _ep->comp_desc = comp_desc; |
| if (g->speed == USB_SPEED_SUPER) { |
| switch (usb_endpoint_type(_ep->desc)) { |
| case USB_ENDPOINT_XFER_BULK: |
| case USB_ENDPOINT_XFER_INT: |
| _ep->maxburst = comp_desc->bMaxBurst; |
| break; |
| case USB_ENDPOINT_XFER_ISOC: |
| /* mult: bits 1:0 of bmAttributes */ |
| _ep->mult = comp_desc->bmAttributes & 0x3; |
| break; |
| default: |
| /* Do nothing for control endpoints */ |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * usb_add_function() - add a function to a configuration |
| * @config: the configuration |
| * @function: the function being added |
| * Context: single threaded during gadget setup |
| * |
| * After initialization, each configuration must have one or more |
| * functions added to it. Adding a function involves calling its @bind() |
| * method to allocate resources such as interface and string identifiers |
| * and endpoints. |
| * |
| * This function returns the value of the function's bind(), which is |
| * zero for success else a negative errno value. |
| */ |
| int usb_add_function(struct usb_configuration *config, |
| struct usb_function *function) |
| { |
| int value = -EINVAL; |
| |
| DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n", |
| function->name, function, |
| config->label, config); |
| |
| if (!function->set_alt || !function->disable) |
| goto done; |
| |
| function->config = config; |
| list_add_tail(&function->list, &config->functions); |
| |
| /* REVISIT *require* function->bind? */ |
| if (function->bind) { |
| value = function->bind(config, function); |
| if (value < 0) { |
| list_del(&function->list); |
| function->config = NULL; |
| } |
| } else |
| value = 0; |
| |
| /* We allow configurations that don't work at both speeds. |
| * If we run into a lowspeed Linux system, treat it the same |
| * as full speed ... it's the function drivers that will need |
| * to avoid bulk and ISO transfers. |
| */ |
| if (!config->fullspeed && function->descriptors) |
| config->fullspeed = true; |
| if (!config->highspeed && function->hs_descriptors) |
| config->highspeed = true; |
| if (!config->superspeed && function->ss_descriptors) |
| config->superspeed = true; |
| |
| done: |
| if (value) |
| DBG(config->cdev, "adding '%s'/%p --> %d\n", |
| function->name, function, value); |
| return value; |
| } |
| |
| /** |
| * usb_function_deactivate - prevent function and gadget enumeration |
| * @function: the function that isn't yet ready to respond |
| * |
| * Blocks response of the gadget driver to host enumeration by |
| * preventing the data line pullup from being activated. This is |
| * normally called during @bind() processing to change from the |
| * initial "ready to respond" state, or when a required resource |
| * becomes available. |
| * |
| * For example, drivers that serve as a passthrough to a userspace |
| * daemon can block enumeration unless that daemon (such as an OBEX, |
| * MTP, or print server) is ready to handle host requests. |
| * |
| * Not all systems support software control of their USB peripheral |
| * data pullups. |
| * |
| * Returns zero on success, else negative errno. |
| */ |
| int usb_function_deactivate(struct usb_function *function) |
| { |
| struct usb_composite_dev *cdev = function->config->cdev; |
| unsigned long flags; |
| int status = 0; |
| |
| spin_lock_irqsave(&cdev->lock, flags); |
| |
| if (cdev->deactivations == 0) |
| status = usb_gadget_disconnect(cdev->gadget); |
| if (status == 0) |
| cdev->deactivations++; |
| |
| spin_unlock_irqrestore(&cdev->lock, flags); |
| return status; |
| } |
| |
| /** |
| * usb_function_activate - allow function and gadget enumeration |
| * @function: function on which usb_function_activate() was called |
| * |
| * Reverses effect of usb_function_deactivate(). If no more functions |
| * are delaying their activation, the gadget driver will respond to |
| * host enumeration procedures. |
| * |
| * Returns zero on success, else negative errno. |
| */ |
| int usb_function_activate(struct usb_function *function) |
| { |
| struct usb_composite_dev *cdev = function->config->cdev; |
| int status = 0; |
| |
| spin_lock(&cdev->lock); |
| |
| if (WARN_ON(cdev->deactivations == 0)) |
| status = -EINVAL; |
| else { |
| cdev->deactivations--; |
| if (cdev->deactivations == 0) |
| status = usb_gadget_connect(cdev->gadget); |
| } |
| |
| spin_unlock(&cdev->lock); |
| return status; |
| } |
| |
| /** |
| * usb_interface_id() - allocate an unused interface ID |
| * @config: configuration associated with the interface |
| * @function: function handling the interface |
| * Context: single threaded during gadget setup |
| * |
| * usb_interface_id() is called from usb_function.bind() callbacks to |
| * allocate new interface IDs. The function driver will then store that |
| * ID in interface, association, CDC union, and other descriptors. It |
| * will also handle any control requests targeted at that interface, |
| * particularly changing its altsetting via set_alt(). There may |
| * also be class-specific or vendor-specific requests to handle. |
| * |
| * All interface identifier should be allocated using this routine, to |
| * ensure that for example different functions don't wrongly assign |
| * different meanings to the same identifier. Note that since interface |
| * identifiers are configuration-specific, functions used in more than |
| * one configuration (or more than once in a given configuration) need |
| * multiple versions of the relevant descriptors. |
| * |
| * Returns the interface ID which was allocated; or -ENODEV if no |
| * more interface IDs can be allocated. |
| */ |
| int usb_interface_id(struct usb_configuration *config, |
| struct usb_function *function) |
| { |
| unsigned id = config->next_interface_id; |
| |
| if (id < MAX_CONFIG_INTERFACES) { |
| config->interface[id] = function; |
| config->next_interface_id = id + 1; |
| return id; |
| } |
| return -ENODEV; |
| } |
| |
| static int config_buf(struct usb_configuration *config, |
| enum usb_device_speed speed, void *buf, u8 type) |
| { |
| struct usb_config_descriptor *c = buf; |
| void *next = buf + USB_DT_CONFIG_SIZE; |
| int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE; |
| struct usb_function *f; |
| int status; |
| |
| /* write the config descriptor */ |
| c = buf; |
| c->bLength = USB_DT_CONFIG_SIZE; |
| c->bDescriptorType = type; |
| /* wTotalLength is written later */ |
| c->bNumInterfaces = config->next_interface_id; |
| c->bConfigurationValue = config->bConfigurationValue; |
| c->iConfiguration = config->iConfiguration; |
| c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes; |
| c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2); |
| |
| /* There may be e.g. OTG descriptors */ |
| if (config->descriptors) { |
| status = usb_descriptor_fillbuf(next, len, |
| config->descriptors); |
| if (status < 0) |
| return status; |
| len -= status; |
| next += status; |
| } |
| |
| /* add each function's descriptors */ |
| list_for_each_entry(f, &config->functions, list) { |
| struct usb_descriptor_header **descriptors; |
| |
| switch (speed) { |
| case USB_SPEED_SUPER: |
| descriptors = f->ss_descriptors; |
| break; |
| case USB_SPEED_HIGH: |
| descriptors = f->hs_descriptors; |
| break; |
| default: |
| descriptors = f->descriptors; |
| } |
| |
| if (!descriptors) |
| continue; |
| status = usb_descriptor_fillbuf(next, len, |
| (const struct usb_descriptor_header **) descriptors); |
| if (status < 0) |
| return status; |
| len -= status; |
| next += status; |
| } |
| |
| len = next - buf; |
| c->wTotalLength = cpu_to_le16(len); |
| return len; |
| } |
| |
| static int config_desc(struct usb_composite_dev *cdev, unsigned w_value) |
| { |
| struct usb_gadget *gadget = cdev->gadget; |
| struct usb_configuration *c; |
| u8 type = w_value >> 8; |
| enum usb_device_speed speed = USB_SPEED_UNKNOWN; |
| |
| if (gadget->speed == USB_SPEED_SUPER) |
| speed = gadget->speed; |
| else if (gadget_is_dualspeed(gadget)) { |
| int hs = 0; |
| if (gadget->speed == USB_SPEED_HIGH) |
| hs = 1; |
| if (type == USB_DT_OTHER_SPEED_CONFIG) |
| hs = !hs; |
| if (hs) |
| speed = USB_SPEED_HIGH; |
| |
| } |
| |
| /* This is a lookup by config *INDEX* */ |
| w_value &= 0xff; |
| list_for_each_entry(c, &cdev->configs, list) { |
| /* ignore configs that won't work at this speed */ |
| switch (speed) { |
| case USB_SPEED_SUPER: |
| if (!c->superspeed) |
| continue; |
| break; |
| case USB_SPEED_HIGH: |
| if (!c->highspeed) |
| continue; |
| break; |
| default: |
| if (!c->fullspeed) |
| continue; |
| } |
| |
| if (w_value == 0) |
| return config_buf(c, speed, cdev->req->buf, type); |
| w_value--; |
| } |
| return -EINVAL; |
| } |
| |
| static int count_configs(struct usb_composite_dev *cdev, unsigned type) |
| { |
| struct usb_gadget *gadget = cdev->gadget; |
| struct usb_configuration *c; |
| unsigned count = 0; |
| int hs = 0; |
| int ss = 0; |
| |
| if (gadget_is_dualspeed(gadget)) { |
| if (gadget->speed == USB_SPEED_HIGH) |
| hs = 1; |
| if (gadget->speed == USB_SPEED_SUPER) |
| ss = 1; |
| if (type == USB_DT_DEVICE_QUALIFIER) |
| hs = !hs; |
| } |
| list_for_each_entry(c, &cdev->configs, list) { |
| /* ignore configs that won't work at this speed */ |
| if (ss) { |
| if (!c->superspeed) |
| continue; |
| } else if (hs) { |
| if (!c->highspeed) |
| continue; |
| } else { |
| if (!c->fullspeed) |
| continue; |
| } |
| count++; |
| } |
| return count; |
| } |
| |
| /** |
| * bos_desc() - prepares the BOS descriptor. |
| * @cdev: pointer to usb_composite device to generate the bos |
| * descriptor for |
| * |
| * This function generates the BOS (Binary Device Object) |
| * descriptor and its device capabilities descriptors. The BOS |
| * descriptor should be supported by a SuperSpeed device. |
| */ |
| static int bos_desc(struct usb_composite_dev *cdev) |
| { |
| struct usb_ext_cap_descriptor *usb_ext; |
| struct usb_ss_cap_descriptor *ss_cap; |
| struct usb_dcd_config_params dcd_config_params; |
| struct usb_bos_descriptor *bos = cdev->req->buf; |
| |
| bos->bLength = USB_DT_BOS_SIZE; |
| bos->bDescriptorType = USB_DT_BOS; |
| |
| bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); |
| bos->bNumDeviceCaps = 0; |
| |
| /* |
| * A SuperSpeed device shall include the USB2.0 extension descriptor |
| * and shall support LPM when operating in USB2.0 HS mode. |
| */ |
| usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength); |
| bos->bNumDeviceCaps++; |
| le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE); |
| usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; |
| usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; |
| usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; |
| usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT); |
| |
| /* |
| * The Superspeed USB Capability descriptor shall be implemented by all |
| * SuperSpeed devices. |
| */ |
| ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); |
| bos->bNumDeviceCaps++; |
| le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE); |
| ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; |
| ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; |
| ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; |
| ss_cap->bmAttributes = 0; /* LTM is not supported yet */ |
| ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION | |
| USB_FULL_SPEED_OPERATION | |
| USB_HIGH_SPEED_OPERATION | |
| USB_5GBPS_OPERATION); |
| ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; |
| |
| /* Get Controller configuration */ |
| if (cdev->gadget->ops->get_config_params) |
| cdev->gadget->ops->get_config_params(&dcd_config_params); |
| else { |
| dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT; |
| dcd_config_params.bU2DevExitLat = |
| cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT); |
| } |
| ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat; |
| ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat; |
| |
| return le16_to_cpu(bos->wTotalLength); |
| } |
| |
| static void device_qual(struct usb_composite_dev *cdev) |
| { |
| struct usb_qualifier_descriptor *qual = cdev->req->buf; |
| |
| qual->bLength = sizeof(*qual); |
| qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER; |
| /* POLICY: same bcdUSB and device type info at both speeds */ |
| qual->bcdUSB = cdev->desc.bcdUSB; |
| qual->bDeviceClass = cdev->desc.bDeviceClass; |
| qual->bDeviceSubClass = cdev->desc.bDeviceSubClass; |
| qual->bDeviceProtocol = cdev->desc.bDeviceProtocol; |
| /* ASSUME same EP0 fifo size at both speeds */ |
| qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket; |
| qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER); |
| qual->bRESERVED = 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void reset_config(struct usb_composite_dev *cdev) |
| { |
| struct usb_function *f; |
| |
| DBG(cdev, "reset config\n"); |
| |
| list_for_each_entry(f, &cdev->config->functions, list) { |
| if (f->disable) |
| f->disable(f); |
| |
| bitmap_zero(f->endpoints, 32); |
| } |
| cdev->config = NULL; |
| } |
| |
| static int set_config(struct usb_composite_dev *cdev, |
| const struct usb_ctrlrequest *ctrl, unsigned number) |
| { |
| struct usb_gadget *gadget = cdev->gadget; |
| struct usb_configuration *c = NULL; |
| int result = -EINVAL; |
| unsigned power = gadget_is_otg(gadget) ? 8 : 100; |
| int tmp; |
| |
| if (number) { |
| list_for_each_entry(c, &cdev->configs, list) { |
| if (c->bConfigurationValue == number) { |
| /* |
| * We disable the FDs of the previous |
| * configuration only if the new configuration |
| * is a valid one |
| */ |
| if (cdev->config) |
| reset_config(cdev); |
| result = 0; |
| break; |
| } |
| } |
| if (result < 0) |
| goto done; |
| } else { /* Zero configuration value - need to reset the config */ |
| if (cdev->config) |
| reset_config(cdev); |
| result = 0; |
| } |
| |
| INFO(cdev, "%s speed config #%d: %s\n", |
| ({ char *speed; |
| switch (gadget->speed) { |
| case USB_SPEED_LOW: |
| speed = "low"; |
| break; |
| case USB_SPEED_FULL: |
| speed = "full"; |
| break; |
| case USB_SPEED_HIGH: |
| speed = "high"; |
| break; |
| case USB_SPEED_SUPER: |
| speed = "super"; |
| break; |
| default: |
| speed = "?"; |
| break; |
| } ; speed; }), number, c ? c->label : "unconfigured"); |
| |
| if (!c) |
| goto done; |
| |
| cdev->config = c; |
| |
| /* Initialize all interfaces by setting them to altsetting zero. */ |
| for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) { |
| struct usb_function *f = c->interface[tmp]; |
| struct usb_descriptor_header **descriptors; |
| |
| if (!f) |
| break; |
| |
| /* |
| * Record which endpoints are used by the function. This is used |
| * to dispatch control requests targeted at that endpoint to the |
| * function's setup callback instead of the current |
| * configuration's setup callback. |
| */ |
| switch (gadget->speed) { |
| case USB_SPEED_SUPER: |
| descriptors = f->ss_descriptors; |
| break; |
| case USB_SPEED_HIGH: |
| descriptors = f->hs_descriptors; |
| break; |
| default: |
| descriptors = f->descriptors; |
| } |
| |
| for (; *descriptors; ++descriptors) { |
| struct usb_endpoint_descriptor *ep; |
| int addr; |
| |
| if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT) |
| continue; |
| |
| ep = (struct usb_endpoint_descriptor *)*descriptors; |
| addr = ((ep->bEndpointAddress & 0x80) >> 3) |
| | (ep->bEndpointAddress & 0x0f); |
| set_bit(addr, f->endpoints); |
| } |
| |
| result = f->set_alt(f, tmp, 0); |
| if (result < 0) { |
| DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n", |
| tmp, f->name, f, result); |
| |
| reset_config(cdev); |
| goto done; |
| } |
| |
| if (result == USB_GADGET_DELAYED_STATUS) { |
| DBG(cdev, |
| "%s: interface %d (%s) requested delayed status\n", |
| __func__, tmp, f->name); |
| cdev->delayed_status++; |
| DBG(cdev, "delayed_status count %d\n", |
| cdev->delayed_status); |
| } |
| } |
| |
| /* when we return, be sure our power usage is valid */ |
| power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW; |
| done: |
| usb_gadget_vbus_draw(gadget, power); |
| if (result >= 0 && cdev->delayed_status) |
| result = USB_GADGET_DELAYED_STATUS; |
| return result; |
| } |
| |
| /** |
| * usb_add_config() - add a configuration to a device. |
| * @cdev: wraps the USB gadget |
| * @config: the configuration, with bConfigurationValue assigned |
| * @bind: the configuration's bind function |
| * Context: single threaded during gadget setup |
| * |
| * One of the main tasks of a composite @bind() routine is to |
| * add each of the configurations it supports, using this routine. |
| * |
| * This function returns the value of the configuration's @bind(), which |
| * is zero for success else a negative errno value. Binding configurations |
| * assigns global resources including string IDs, and per-configuration |
| * resources such as interface IDs and endpoints. |
| */ |
| int usb_add_config(struct usb_composite_dev *cdev, |
| struct usb_configuration *config, |
| int (*bind)(struct usb_configuration *)) |
| { |
| int status = -EINVAL; |
| struct usb_configuration *c; |
| |
| DBG(cdev, "adding config #%u '%s'/%p\n", |
| config->bConfigurationValue, |
| config->label, config); |
| |
| if (!config->bConfigurationValue || !bind) |
| goto done; |
| |
| /* Prevent duplicate configuration identifiers */ |
| list_for_each_entry(c, &cdev->configs, list) { |
| if (c->bConfigurationValue == config->bConfigurationValue) { |
| status = -EBUSY; |
| goto done; |
| } |
| } |
| |
| config->cdev = cdev; |
| list_add_tail(&config->list, &cdev->configs); |
| |
| INIT_LIST_HEAD(&config->functions); |
| config->next_interface_id = 0; |
| |
| status = bind(config); |
| if (status < 0) { |
| list_del(&config->list); |
| config->cdev = NULL; |
| } else { |
| unsigned i; |
| |
| DBG(cdev, "cfg %d/%p speeds:%s%s%s\n", |
| config->bConfigurationValue, config, |
| config->superspeed ? " super" : "", |
| config->highspeed ? " high" : "", |
| config->fullspeed |
| ? (gadget_is_dualspeed(cdev->gadget) |
| ? " full" |
| : " full/low") |
| : ""); |
| |
| for (i = 0; i < MAX_CONFIG_INTERFACES; i++) { |
| struct usb_function *f = config->interface[i]; |
| |
| if (!f) |
| continue; |
| DBG(cdev, " interface %d = %s/%p\n", |
| i, f->name, f); |
| } |
| } |
| |
| /* set_alt(), or next bind(), sets up |
| * ep->driver_data as needed. |
| */ |
| usb_ep_autoconfig_reset(cdev->gadget); |
| |
| done: |
| if (status) |
| DBG(cdev, "added config '%s'/%u --> %d\n", config->label, |
| config->bConfigurationValue, status); |
| return status; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* We support strings in multiple languages ... string descriptor zero |
| * says which languages are supported. The typical case will be that |
| * only one language (probably English) is used, with I18N handled on |
| * the host side. |
| */ |
| |
| static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf) |
| { |
| const struct usb_gadget_strings *s; |
| u16 language; |
| __le16 *tmp; |
| |
| while (*sp) { |
| s = *sp; |
| language = cpu_to_le16(s->language); |
| for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) { |
| if (*tmp == language) |
| goto repeat; |
| } |
| *tmp++ = language; |
| repeat: |
| sp++; |
| } |
| } |
| |
| static int lookup_string( |
| struct usb_gadget_strings **sp, |
| void *buf, |
| u16 language, |
| int id |
| ) |
| { |
| struct usb_gadget_strings *s; |
| int value; |
| |
| while (*sp) { |
| s = *sp++; |
| if (s->language != language) |
| continue; |
| value = usb_gadget_get_string(s, id, buf); |
| if (value > 0) |
| return value; |
| } |
| return -EINVAL; |
| } |
| |
| static int get_string(struct usb_composite_dev *cdev, |
| void *buf, u16 language, int id) |
| { |
| struct usb_configuration *c; |
| struct usb_function *f; |
| int len; |
| const char *str; |
| |
| /* Yes, not only is USB's I18N support probably more than most |
| * folk will ever care about ... also, it's all supported here. |
| * (Except for UTF8 support for Unicode's "Astral Planes".) |
| */ |
| |
| /* 0 == report all available language codes */ |
| if (id == 0) { |
| struct usb_string_descriptor *s = buf; |
| struct usb_gadget_strings **sp; |
| |
| memset(s, 0, 256); |
| s->bDescriptorType = USB_DT_STRING; |
| |
| sp = composite->strings; |
| if (sp) |
| collect_langs(sp, s->wData); |
| |
| list_for_each_entry(c, &cdev->configs, list) { |
| sp = c->strings; |
| if (sp) |
| collect_langs(sp, s->wData); |
| |
| list_for_each_entry(f, &c->functions, list) { |
| sp = f->strings; |
| if (sp) |
| collect_langs(sp, s->wData); |
| } |
| } |
| |
| for (len = 0; len <= 126 && s->wData[len]; len++) |
| continue; |
| if (!len) |
| return -EINVAL; |
| |
| s->bLength = 2 * (len + 1); |
| return s->bLength; |
| } |
| |
| /* Otherwise, look up and return a specified string. First |
| * check if the string has not been overridden. |
| */ |
| if (cdev->manufacturer_override == id) |
| str = iManufacturer ?: composite->iManufacturer ?: |
| composite_manufacturer; |
| else if (cdev->product_override == id) |
| str = iProduct ?: composite->iProduct; |
| else if (cdev->serial_override == id) |
| str = iSerialNumber; |
| else |
| str = NULL; |
| if (str) { |
| struct usb_gadget_strings strings = { |
| .language = language, |
| .strings = &(struct usb_string) { 0xff, str } |
| }; |
| return usb_gadget_get_string(&strings, 0xff, buf); |
| } |
| |
| /* String IDs are device-scoped, so we look up each string |
| * table we're told about. These lookups are infrequent; |
| * simpler-is-better here. |
| */ |
| if (composite->strings) { |
| len = lookup_string(composite->strings, buf, language, id); |
| if (len > 0) |
| return len; |
| } |
| list_for_each_entry(c, &cdev->configs, list) { |
| if (c->strings) { |
| len = lookup_string(c->strings, buf, language, id); |
| if (len > 0) |
| return len; |
| } |
| list_for_each_entry(f, &c->functions, list) { |
| if (!f->strings) |
| continue; |
| len = lookup_string(f->strings, buf, language, id); |
| if (len > 0) |
| return len; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| /** |
| * usb_string_id() - allocate an unused string ID |
| * @cdev: the device whose string descriptor IDs are being allocated |
| * Context: single threaded during gadget setup |
| * |
| * @usb_string_id() is called from bind() callbacks to allocate |
| * string IDs. Drivers for functions, configurations, or gadgets will |
| * then store that ID in the appropriate descriptors and string table. |
| * |
| * All string identifier should be allocated using this, |
| * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure |
| * that for example different functions don't wrongly assign different |
| * meanings to the same identifier. |
| */ |
| int usb_string_id(struct usb_composite_dev *cdev) |
| { |
| if (cdev->next_string_id < 254) { |
| /* string id 0 is reserved by USB spec for list of |
| * supported languages */ |
| /* 255 reserved as well? -- mina86 */ |
| cdev->next_string_id++; |
| return cdev->next_string_id; |
| } |
| return -ENODEV; |
| } |
| |
| /** |
| * usb_string_ids() - allocate unused string IDs in batch |
| * @cdev: the device whose string descriptor IDs are being allocated |
| * @str: an array of usb_string objects to assign numbers to |
| * Context: single threaded during gadget setup |
| * |
| * @usb_string_ids() is called from bind() callbacks to allocate |
| * string IDs. Drivers for functions, configurations, or gadgets will |
| * then copy IDs from the string table to the appropriate descriptors |
| * and string table for other languages. |
| * |
| * All string identifier should be allocated using this, |
| * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for |
| * example different functions don't wrongly assign different meanings |
| * to the same identifier. |
| */ |
| int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) |
| { |
| int next = cdev->next_string_id; |
| |
| for (; str->s; ++str) { |
| if (unlikely(next >= 254)) |
| return -ENODEV; |
| str->id = ++next; |
| } |
| |
| cdev->next_string_id = next; |
| |
| return 0; |
| } |
| |
| /** |
| * usb_string_ids_n() - allocate unused string IDs in batch |
| * @c: the device whose string descriptor IDs are being allocated |
| * @n: number of string IDs to allocate |
| * Context: single threaded during gadget setup |
| * |
| * Returns the first requested ID. This ID and next @n-1 IDs are now |
| * valid IDs. At least provided that @n is non-zero because if it |
| * is, returns last requested ID which is now very useful information. |
| * |
| * @usb_string_ids_n() is called from bind() callbacks to allocate |
| * string IDs. Drivers for functions, configurations, or gadgets will |
| * then store that ID in the appropriate descriptors and string table. |
| * |
| * All string identifier should be allocated using this, |
| * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for |
| * example different functions don't wrongly assign different meanings |
| * to the same identifier. |
| */ |
| int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) |
| { |
| unsigned next = c->next_string_id; |
| if (unlikely(n > 254 || (unsigned)next + n > 254)) |
| return -ENODEV; |
| c->next_string_id += n; |
| return next + 1; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (req->status || req->actual != req->length) |
| DBG((struct usb_composite_dev *) ep->driver_data, |
| "setup complete --> %d, %d/%d\n", |
| req->status, req->actual, req->length); |
| } |
| |
| /* |
| * The setup() callback implements all the ep0 functionality that's |
| * not handled lower down, in hardware or the hardware driver(like |
| * device and endpoint feature flags, and their status). It's all |
| * housekeeping for the gadget function we're implementing. Most of |
| * the work is in config and function specific setup. |
| */ |
| static int |
| composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) |
| { |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| struct usb_request *req = cdev->req; |
| int value = -EOPNOTSUPP; |
| int status = 0; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u8 intf = w_index & 0xFF; |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| struct usb_function *f = NULL; |
| u8 endp; |
| |
| /* partial re-init of the response message; the function or the |
| * gadget might need to intercept e.g. a control-OUT completion |
| * when we delegate to it. |
| */ |
| req->zero = 0; |
| req->complete = composite_setup_complete; |
| req->length = 0; |
| gadget->ep0->driver_data = cdev; |
| |
| switch (ctrl->bRequest) { |
| |
| /* we handle all standard USB descriptors */ |
| case USB_REQ_GET_DESCRIPTOR: |
| if (ctrl->bRequestType != USB_DIR_IN) |
| goto unknown; |
| switch (w_value >> 8) { |
| |
| case USB_DT_DEVICE: |
| cdev->desc.bNumConfigurations = |
| count_configs(cdev, USB_DT_DEVICE); |
| cdev->desc.bMaxPacketSize0 = |
| cdev->gadget->ep0->maxpacket; |
| if (gadget_is_superspeed(gadget)) { |
| if (gadget->speed >= USB_SPEED_SUPER) |
| cdev->desc.bcdUSB = cpu_to_le16(0x0300); |
| else |
| cdev->desc.bcdUSB = cpu_to_le16(0x0210); |
| } |
| |
| value = min(w_length, (u16) sizeof cdev->desc); |
| memcpy(req->buf, &cdev->desc, value); |
| break; |
| case USB_DT_DEVICE_QUALIFIER: |
| if (!gadget_is_dualspeed(gadget) || |
| gadget->speed >= USB_SPEED_SUPER) |
| break; |
| device_qual(cdev); |
| value = min_t(int, w_length, |
| sizeof(struct usb_qualifier_descriptor)); |
| break; |
| case USB_DT_OTHER_SPEED_CONFIG: |
| if (!gadget_is_dualspeed(gadget) || |
| gadget->speed >= USB_SPEED_SUPER) |
| break; |
| /* FALLTHROUGH */ |
| case USB_DT_CONFIG: |
| value = config_desc(cdev, w_value); |
| if (value >= 0) |
| value = min(w_length, (u16) value); |
| break; |
| case USB_DT_STRING: |
| value = get_string(cdev, req->buf, |
| w_index, w_value & 0xff); |
| if (value >= 0) |
| value = min(w_length, (u16) value); |
| break; |
| case USB_DT_BOS: |
| if (gadget_is_superspeed(gadget)) { |
| value = bos_desc(cdev); |
| value = min(w_length, (u16) value); |
| } |
| break; |
| } |
| break; |
| |
| /* any number of configs can work */ |
| case USB_REQ_SET_CONFIGURATION: |
| if (ctrl->bRequestType != 0) |
| goto unknown; |
| if (gadget_is_otg(gadget)) { |
| if (gadget->a_hnp_support) |
| DBG(cdev, "HNP available\n"); |
| else if (gadget->a_alt_hnp_support) |
| DBG(cdev, "HNP on another port\n"); |
| else |
| VDBG(cdev, "HNP inactive\n"); |
| } |
| spin_lock(&cdev->lock); |
| value = set_config(cdev, ctrl, w_value); |
| spin_unlock(&cdev->lock); |
| break; |
| case USB_REQ_GET_CONFIGURATION: |
| if (ctrl->bRequestType != USB_DIR_IN) |
| goto unknown; |
| if (cdev->config) |
| *(u8 *)req->buf = cdev->config->bConfigurationValue; |
| else |
| *(u8 *)req->buf = 0; |
| value = min(w_length, (u16) 1); |
| break; |
| |
| /* function drivers must handle get/set altsetting; if there's |
| * no get() method, we know only altsetting zero works. |
| */ |
| case USB_REQ_SET_INTERFACE: |
| if (ctrl->bRequestType != USB_RECIP_INTERFACE) |
| goto unknown; |
| if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) |
| break; |
| f = cdev->config->interface[intf]; |
| if (!f) |
| break; |
| if (w_value && !f->set_alt) |
| break; |
| value = f->set_alt(f, w_index, w_value); |
| if (value == USB_GADGET_DELAYED_STATUS) { |
| DBG(cdev, |
| "%s: interface %d (%s) requested delayed status\n", |
| __func__, intf, f->name); |
| cdev->delayed_status++; |
| DBG(cdev, "delayed_status count %d\n", |
| cdev->delayed_status); |
| } |
| break; |
| case USB_REQ_GET_INTERFACE: |
| if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) |
| goto unknown; |
| if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) |
| break; |
| f = cdev->config->interface[intf]; |
| if (!f) |
| break; |
| /* lots of interfaces only need altsetting zero... */ |
| value = f->get_alt ? f->get_alt(f, w_index) : 0; |
| if (value < 0) |
| break; |
| *((u8 *)req->buf) = value; |
| value = min(w_length, (u16) 1); |
| break; |
| |
| /* |
| * USB 3.0 additions: |
| * Function driver should handle get_status request. If such cb |
| * wasn't supplied we respond with default value = 0 |
| * Note: function driver should supply such cb only for the first |
| * interface of the function |
| */ |
| case USB_REQ_GET_STATUS: |
| if (!gadget_is_superspeed(gadget)) |
| goto unknown; |
| if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE)) |
| goto unknown; |
| value = 2; /* This is the length of the get_status reply */ |
| put_unaligned_le16(0, req->buf); |
| if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) |
| break; |
| f = cdev->config->interface[intf]; |
| if (!f) |
| break; |
| status = f->get_status ? f->get_status(f) : 0; |
| if (status < 0) |
| break; |
| put_unaligned_le16(status & 0x0000ffff, req->buf); |
| break; |
| /* |
| * Function drivers should handle SetFeature/ClearFeature |
| * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied |
| * only for the first interface of the function |
| */ |
| case USB_REQ_CLEAR_FEATURE: |
| case USB_REQ_SET_FEATURE: |
| if (!gadget_is_superspeed(gadget)) |
| goto unknown; |
| if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE)) |
| goto unknown; |
| switch (w_value) { |
| case USB_INTRF_FUNC_SUSPEND: |
| if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) |
| break; |
| f = cdev->config->interface[intf]; |
| if (!f) |
| break; |
| value = 0; |
| if (f->func_suspend) |
| value = f->func_suspend(f, w_index >> 8); |
| if (value < 0) { |
| ERROR(cdev, |
| "func_suspend() returned error %d\n", |
| value); |
| value = 0; |
| } |
| break; |
| } |
| break; |
| default: |
| unknown: |
| VDBG(cdev, |
| "non-core control req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| |
| /* functions always handle their interfaces and endpoints... |
| * punt other recipients (other, WUSB, ...) to the current |
| * configuration code. |
| * |
| * REVISIT it could make sense to let the composite device |
| * take such requests too, if that's ever needed: to work |
| * in config 0, etc. |
| */ |
| switch (ctrl->bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_INTERFACE: |
| if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) |
| break; |
| f = cdev->config->interface[intf]; |
| break; |
| |
| case USB_RECIP_ENDPOINT: |
| endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f); |
| list_for_each_entry(f, &cdev->config->functions, list) { |
| if (test_bit(endp, f->endpoints)) |
| break; |
| } |
| if (&f->list == &cdev->config->functions) |
| f = NULL; |
| break; |
| } |
| |
| if (f && f->setup) |
| value = f->setup(f, ctrl); |
| else { |
| struct usb_configuration *c; |
| |
| c = cdev->config; |
| if (c && c->setup) |
| value = c->setup(c, ctrl); |
| } |
| |
| goto done; |
| } |
| |
| /* respond with data transfer before status phase? */ |
| if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) { |
| req->length = value; |
| req->zero = value < w_length; |
| value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) { |
| DBG(cdev, "ep_queue --> %d\n", value); |
| req->status = 0; |
| composite_setup_complete(gadget->ep0, req); |
| } |
| } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) { |
| WARN(cdev, |
| "%s: Delayed status not supported for w_length != 0", |
| __func__); |
| } |
| |
| done: |
| /* device either stalls (value < 0) or reports success */ |
| return value; |
| } |
| |
| static void composite_disconnect(struct usb_gadget *gadget) |
| { |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| unsigned long flags; |
| |
| /* REVISIT: should we have config and device level |
| * disconnect callbacks? |
| */ |
| spin_lock_irqsave(&cdev->lock, flags); |
| if (cdev->config) |
| reset_config(cdev); |
| if (composite->disconnect) |
| composite->disconnect(cdev); |
| spin_unlock_irqrestore(&cdev->lock, flags); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static ssize_t composite_show_suspended(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct usb_gadget *gadget = dev_to_usb_gadget(dev); |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| |
| return sprintf(buf, "%d\n", cdev->suspended); |
| } |
| |
| static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL); |
| |
| static void |
| composite_unbind(struct usb_gadget *gadget) |
| { |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| |
| /* composite_disconnect() must already have been called |
| * by the underlying peripheral controller driver! |
| * so there's no i/o concurrency that could affect the |
| * state protected by cdev->lock. |
| */ |
| WARN_ON(cdev->config); |
| |
| while (!list_empty(&cdev->configs)) { |
| struct usb_configuration *c; |
| |
| c = list_first_entry(&cdev->configs, |
| struct usb_configuration, list); |
| while (!list_empty(&c->functions)) { |
| struct usb_function *f; |
| |
| f = list_first_entry(&c->functions, |
| struct usb_function, list); |
| list_del(&f->list); |
| if (f->unbind) { |
| DBG(cdev, "unbind function '%s'/%p\n", |
| f->name, f); |
| f->unbind(c, f); |
| /* may free memory for "f" */ |
| } |
| } |
| list_del(&c->list); |
| if (c->unbind) { |
| DBG(cdev, "unbind config '%s'/%p\n", c->label, c); |
| c->unbind(c); |
| /* may free memory for "c" */ |
| } |
| } |
| if (composite->unbind) |
| composite->unbind(cdev); |
| |
| if (cdev->req) { |
| kfree(cdev->req->buf); |
| usb_ep_free_request(gadget->ep0, cdev->req); |
| } |
| device_remove_file(&gadget->dev, &dev_attr_suspended); |
| kfree(cdev); |
| set_gadget_data(gadget, NULL); |
| composite = NULL; |
| } |
| |
| static u8 override_id(struct usb_composite_dev *cdev, u8 *desc) |
| { |
| if (!*desc) { |
| int ret = usb_string_id(cdev); |
| if (unlikely(ret < 0)) |
| WARNING(cdev, "failed to override string ID\n"); |
| else |
| *desc = ret; |
| } |
| |
| return *desc; |
| } |
| |
| static int composite_bind(struct usb_gadget *gadget) |
| { |
| struct usb_composite_dev *cdev; |
| int status = -ENOMEM; |
| |
| cdev = kzalloc(sizeof *cdev, GFP_KERNEL); |
| if (!cdev) |
| return status; |
| |
| spin_lock_init(&cdev->lock); |
| cdev->gadget = gadget; |
| set_gadget_data(gadget, cdev); |
| INIT_LIST_HEAD(&cdev->configs); |
| |
| /* preallocate control response and buffer */ |
| cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); |
| if (!cdev->req) |
| goto fail; |
| cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL); |
| if (!cdev->req->buf) |
| goto fail; |
| cdev->req->complete = composite_setup_complete; |
| gadget->ep0->driver_data = cdev; |
| |
| cdev->bufsiz = USB_BUFSIZ; |
| cdev->driver = composite; |
| |
| /* |
| * As per USB compliance update, a device that is actively drawing |
| * more than 100mA from USB must report itself as bus-powered in |
| * the GetStatus(DEVICE) call. |
| */ |
| if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW) |
| usb_gadget_set_selfpowered(gadget); |
| |
| /* interface and string IDs start at zero via kzalloc. |
| * we force endpoints to start unassigned; few controller |
| * drivers will zero ep->driver_data. |
| */ |
| usb_ep_autoconfig_reset(cdev->gadget); |
| |
| /* composite gadget needs to assign strings for whole device (like |
| * serial number), register function drivers, potentially update |
| * power state and consumption, etc |
| */ |
| status = composite_gadget_bind(cdev); |
| if (status < 0) |
| goto fail; |
| |
| cdev->desc = *composite->dev; |
| |
| /* standardized runtime overrides for device ID data */ |
| if (idVendor) |
| cdev->desc.idVendor = cpu_to_le16(idVendor); |
| if (idProduct) |
| cdev->desc.idProduct = cpu_to_le16(idProduct); |
| if (bcdDevice) |
| cdev->desc.bcdDevice = cpu_to_le16(bcdDevice); |
| |
| /* string overrides */ |
| if (iManufacturer || !cdev->desc.iManufacturer) { |
| if (!iManufacturer && !composite->iManufacturer && |
| !*composite_manufacturer) |
| snprintf(composite_manufacturer, |
| sizeof composite_manufacturer, |
| "%s %s with %s", |
| init_utsname()->sysname, |
| init_utsname()->release, |
| gadget->name); |
| |
| cdev->manufacturer_override = |
| override_id(cdev, &cdev->desc.iManufacturer); |
| } |
| |
| if (iProduct || (!cdev->desc.iProduct && composite->iProduct)) |
| cdev->product_override = |
| override_id(cdev, &cdev->desc.iProduct); |
| |
| if (iSerialNumber) |
| cdev->serial_override = |
| override_id(cdev, &cdev->desc.iSerialNumber); |
| |
| /* has userspace failed to provide a serial number? */ |
| if (composite->needs_serial && !cdev->desc.iSerialNumber) |
| WARNING(cdev, "userspace failed to provide iSerialNumber\n"); |
| |
| /* finish up */ |
| status = device_create_file(&gadget->dev, &dev_attr_suspended); |
| if (status) |
| goto fail; |
| |
| INFO(cdev, "%s ready\n", composite->name); |
| return 0; |
| |
| fail: |
| composite_unbind(gadget); |
| return status; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void |
| composite_suspend(struct usb_gadget *gadget) |
| { |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| struct usb_function *f; |
| |
| /* REVISIT: should we have config level |
| * suspend/resume callbacks? |
| */ |
| DBG(cdev, "suspend\n"); |
| if (cdev->config) { |
| list_for_each_entry(f, &cdev->config->functions, list) { |
| if (f->suspend) |
| f->suspend(f); |
| } |
| } |
| if (composite->suspend) |
| composite->suspend(cdev); |
| |
| cdev->suspended = 1; |
| |
| usb_gadget_vbus_draw(gadget, 2); |
| } |
| |
| static void |
| composite_resume(struct usb_gadget *gadget) |
| { |
| struct usb_composite_dev *cdev = get_gadget_data(gadget); |
| struct usb_function *f; |
| u8 maxpower; |
| |
| /* REVISIT: should we have config level |
| * suspend/resume callbacks? |
| */ |
| DBG(cdev, "resume\n"); |
| if (composite->resume) |
| composite->resume(cdev); |
| if (cdev->config) { |
| list_for_each_entry(f, &cdev->config->functions, list) { |
| if (f->resume) |
| f->resume(f); |
| } |
| |
| maxpower = cdev->config->bMaxPower; |
| |
| usb_gadget_vbus_draw(gadget, maxpower ? |
| (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW); |
| } |
| |
| cdev->suspended = 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_gadget_driver composite_driver = { |
| #ifdef CONFIG_USB_GADGET_SUPERSPEED |
| .speed = USB_SPEED_SUPER, |
| #else |
| .speed = USB_SPEED_HIGH, |
| #endif |
| |
| .unbind = composite_unbind, |
| |
| .setup = composite_setup, |
| .disconnect = composite_disconnect, |
| |
| .suspend = composite_suspend, |
| .resume = composite_resume, |
| |
| .driver = { |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /** |
| * usb_composite_probe() - register a composite driver |
| * @driver: the driver to register |
| * @bind: the callback used to allocate resources that are shared across the |
| * whole device, such as string IDs, and add its configurations using |
| * @usb_add_config(). This may fail by returning a negative errno |
| * value; it should return zero on successful initialization. |
| * Context: single threaded during gadget setup |
| * |
| * This function is used to register drivers using the composite driver |
| * framework. The return value is zero, or a negative errno value. |
| * Those values normally come from the driver's @bind method, which does |
| * all the work of setting up the driver to match the hardware. |
| * |
| * On successful return, the gadget is ready to respond to requests from |
| * the host, unless one of its components invokes usb_gadget_disconnect() |
| * while it was binding. That would usually be done in order to wait for |
| * some userspace participation. |
| */ |
| int usb_composite_probe(struct usb_composite_driver *driver, |
| int (*bind)(struct usb_composite_dev *cdev)) |
| { |
| if (!driver || !driver->dev || !bind || composite) |
| return -EINVAL; |
| |
| if (!driver->name) |
| driver->name = "composite"; |
| if (!driver->iProduct) |
| driver->iProduct = driver->name; |
| composite_driver.function = (char *) driver->name; |
| composite_driver.driver.name = driver->name; |
| composite_driver.speed = min((u8)composite_driver.speed, |
| (u8)driver->max_speed); |
| composite = driver; |
| composite_gadget_bind = bind; |
| |
| return usb_gadget_probe_driver(&composite_driver, composite_bind); |
| } |
| |
| /** |
| * usb_composite_unregister() - unregister a composite driver |
| * @driver: the driver to unregister |
| * |
| * This function is used to unregister drivers using the composite |
| * driver framework. |
| */ |
| void usb_composite_unregister(struct usb_composite_driver *driver) |
| { |
| if (composite != driver) |
| return; |
| usb_gadget_unregister_driver(&composite_driver); |
| } |
| |
| /** |
| * usb_composite_setup_continue() - Continue with the control transfer |
| * @cdev: the composite device who's control transfer was kept waiting |
| * |
| * This function must be called by the USB function driver to continue |
| * with the control transfer's data/status stage in case it had requested to |
| * delay the data/status stages. A USB function's setup handler (e.g. set_alt()) |
| * can request the composite framework to delay the setup request's data/status |
| * stages by returning USB_GADGET_DELAYED_STATUS. |
| */ |
| void usb_composite_setup_continue(struct usb_composite_dev *cdev) |
| { |
| int value; |
| struct usb_request *req = cdev->req; |
| unsigned long flags; |
| |
| DBG(cdev, "%s\n", __func__); |
| spin_lock_irqsave(&cdev->lock, flags); |
| |
| if (cdev->delayed_status == 0) { |
| WARN(cdev, "%s: Unexpected call\n", __func__); |
| |
| } else if (--cdev->delayed_status == 0) { |
| DBG(cdev, "%s: Completing delayed status\n", __func__); |
| req->length = 0; |
| value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) { |
| DBG(cdev, "ep_queue --> %d\n", value); |
| req->status = 0; |
| composite_setup_complete(cdev->gadget->ep0, req); |
| } |
| } |
| |
| spin_unlock_irqrestore(&cdev->lock, flags); |
| } |
| |