| /* |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/kernel.h> |
| #include <linux/signal.h> |
| #include <linux/errno.h> |
| #include <linux/wait.h> |
| #include <linux/unistd.h> |
| #include <linux/stddef.h> |
| #include <linux/personality.h> |
| #include <linux/suspend.h> |
| #include <linux/ptrace.h> |
| #include <linux/elf.h> |
| #include <linux/compat.h> |
| #include <linux/syscalls.h> |
| #include <linux/uaccess.h> |
| #include <asm/processor.h> |
| #include <asm/ucontext.h> |
| #include <asm/sigframe.h> |
| #include <asm/syscalls.h> |
| #include <asm/vdso.h> |
| #include <arch/interrupts.h> |
| |
| #define DEBUG_SIG 0 |
| |
| /* |
| * Do a signal return; undo the signal stack. |
| */ |
| |
| int restore_sigcontext(struct pt_regs *regs, |
| struct sigcontext __user *sc) |
| { |
| int err = 0; |
| int i; |
| |
| /* Always make any pending restarted system calls return -EINTR */ |
| current_thread_info()->restart_block.fn = do_no_restart_syscall; |
| |
| /* |
| * Enforce that sigcontext is like pt_regs, and doesn't mess |
| * up our stack alignment rules. |
| */ |
| BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs)); |
| BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0); |
| |
| for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) |
| err |= __get_user(regs->regs[i], &sc->gregs[i]); |
| |
| /* Ensure that the PL is always set to USER_PL. */ |
| regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1)); |
| |
| regs->faultnum = INT_SWINT_1_SIGRETURN; |
| |
| return err; |
| } |
| |
| void signal_fault(const char *type, struct pt_regs *regs, |
| void __user *frame, int sig) |
| { |
| trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV); |
| force_sigsegv(sig, current); |
| } |
| |
| /* The assembly shim for this function arranges to ignore the return value. */ |
| SYSCALL_DEFINE0(rt_sigreturn) |
| { |
| struct pt_regs *regs = current_pt_regs(); |
| struct rt_sigframe __user *frame = |
| (struct rt_sigframe __user *)(regs->sp); |
| sigset_t set; |
| |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) |
| goto badframe; |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) |
| goto badframe; |
| |
| set_current_blocked(&set); |
| |
| if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) |
| goto badframe; |
| |
| if (restore_altstack(&frame->uc.uc_stack)) |
| goto badframe; |
| |
| return 0; |
| |
| badframe: |
| signal_fault("bad sigreturn frame", regs, frame, 0); |
| return 0; |
| } |
| |
| /* |
| * Set up a signal frame. |
| */ |
| |
| int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) |
| err |= __put_user(regs->regs[i], &sc->gregs[i]); |
| |
| return err; |
| } |
| |
| /* |
| * Determine which stack to use.. |
| */ |
| static inline void __user *get_sigframe(struct k_sigaction *ka, |
| struct pt_regs *regs, |
| size_t frame_size) |
| { |
| unsigned long sp; |
| |
| /* Default to using normal stack */ |
| sp = regs->sp; |
| |
| /* |
| * If we are on the alternate signal stack and would overflow |
| * it, don't. Return an always-bogus address instead so we |
| * will die with SIGSEGV. |
| */ |
| if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size))) |
| return (void __user __force *)-1UL; |
| |
| /* This is the X/Open sanctioned signal stack switching. */ |
| if (ka->sa.sa_flags & SA_ONSTACK) { |
| if (sas_ss_flags(sp) == 0) |
| sp = current->sas_ss_sp + current->sas_ss_size; |
| } |
| |
| sp -= frame_size; |
| /* |
| * Align the stack pointer according to the TILE ABI, |
| * i.e. so that on function entry (sp & 15) == 0. |
| */ |
| sp &= -16UL; |
| return (void __user *) sp; |
| } |
| |
| static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, |
| sigset_t *set, struct pt_regs *regs) |
| { |
| unsigned long restorer; |
| struct rt_sigframe __user *frame; |
| int err = 0; |
| int usig; |
| |
| frame = get_sigframe(ka, regs, sizeof(*frame)); |
| |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) |
| goto give_sigsegv; |
| |
| usig = current_thread_info()->exec_domain |
| && current_thread_info()->exec_domain->signal_invmap |
| && sig < 32 |
| ? current_thread_info()->exec_domain->signal_invmap[sig] |
| : sig; |
| |
| /* Always write at least the signal number for the stack backtracer. */ |
| if (ka->sa.sa_flags & SA_SIGINFO) { |
| /* At sigreturn time, restore the callee-save registers too. */ |
| err |= copy_siginfo_to_user(&frame->info, info); |
| regs->flags |= PT_FLAGS_RESTORE_REGS; |
| } else { |
| err |= __put_user(info->si_signo, &frame->info.si_signo); |
| } |
| |
| /* Create the ucontext. */ |
| err |= __clear_user(&frame->save_area, sizeof(frame->save_area)); |
| err |= __put_user(0, &frame->uc.uc_flags); |
| err |= __put_user(NULL, &frame->uc.uc_link); |
| err |= __save_altstack(&frame->uc.uc_stack, regs->sp); |
| err |= setup_sigcontext(&frame->uc.uc_mcontext, regs); |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); |
| if (err) |
| goto give_sigsegv; |
| |
| restorer = VDSO_SYM(&__vdso_rt_sigreturn); |
| if (ka->sa.sa_flags & SA_RESTORER) |
| restorer = (unsigned long) ka->sa.sa_restorer; |
| |
| /* |
| * Set up registers for signal handler. |
| * Registers that we don't modify keep the value they had from |
| * user-space at the time we took the signal. |
| * We always pass siginfo and mcontext, regardless of SA_SIGINFO, |
| * since some things rely on this (e.g. glibc's debug/segfault.c). |
| */ |
| regs->pc = (unsigned long) ka->sa.sa_handler; |
| regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */ |
| regs->sp = (unsigned long) frame; |
| regs->lr = restorer; |
| regs->regs[0] = (unsigned long) usig; |
| regs->regs[1] = (unsigned long) &frame->info; |
| regs->regs[2] = (unsigned long) &frame->uc; |
| regs->flags |= PT_FLAGS_CALLER_SAVES; |
| return 0; |
| |
| give_sigsegv: |
| signal_fault("bad setup frame", regs, frame, sig); |
| return -EFAULT; |
| } |
| |
| /* |
| * OK, we're invoking a handler |
| */ |
| |
| static void handle_signal(unsigned long sig, siginfo_t *info, |
| struct k_sigaction *ka, |
| struct pt_regs *regs) |
| { |
| sigset_t *oldset = sigmask_to_save(); |
| int ret; |
| |
| /* Are we from a system call? */ |
| if (regs->faultnum == INT_SWINT_1) { |
| /* If so, check system call restarting.. */ |
| switch (regs->regs[0]) { |
| case -ERESTART_RESTARTBLOCK: |
| case -ERESTARTNOHAND: |
| regs->regs[0] = -EINTR; |
| break; |
| |
| case -ERESTARTSYS: |
| if (!(ka->sa.sa_flags & SA_RESTART)) { |
| regs->regs[0] = -EINTR; |
| break; |
| } |
| /* fallthrough */ |
| case -ERESTARTNOINTR: |
| /* Reload caller-saves to restore r0..r5 and r10. */ |
| regs->flags |= PT_FLAGS_CALLER_SAVES; |
| regs->regs[0] = regs->orig_r0; |
| regs->pc -= 8; |
| } |
| } |
| |
| /* Set up the stack frame */ |
| #ifdef CONFIG_COMPAT |
| if (is_compat_task()) |
| ret = compat_setup_rt_frame(sig, ka, info, oldset, regs); |
| else |
| #endif |
| ret = setup_rt_frame(sig, ka, info, oldset, regs); |
| if (ret) |
| return; |
| signal_delivered(sig, info, ka, regs, |
| test_thread_flag(TIF_SINGLESTEP)); |
| } |
| |
| /* |
| * Note that 'init' is a special process: it doesn't get signals it doesn't |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by |
| * mistake. |
| */ |
| void do_signal(struct pt_regs *regs) |
| { |
| siginfo_t info; |
| int signr; |
| struct k_sigaction ka; |
| |
| /* |
| * i386 will check if we're coming from kernel mode and bail out |
| * here. In my experience this just turns weird crashes into |
| * weird spin-hangs. But if we find a case where this seems |
| * helpful, we can reinstate the check on "!user_mode(regs)". |
| */ |
| |
| signr = get_signal_to_deliver(&info, &ka, regs, NULL); |
| if (signr > 0) { |
| /* Whee! Actually deliver the signal. */ |
| handle_signal(signr, &info, &ka, regs); |
| goto done; |
| } |
| |
| /* Did we come from a system call? */ |
| if (regs->faultnum == INT_SWINT_1) { |
| /* Restart the system call - no handlers present */ |
| switch (regs->regs[0]) { |
| case -ERESTARTNOHAND: |
| case -ERESTARTSYS: |
| case -ERESTARTNOINTR: |
| regs->flags |= PT_FLAGS_CALLER_SAVES; |
| regs->regs[0] = regs->orig_r0; |
| regs->pc -= 8; |
| break; |
| |
| case -ERESTART_RESTARTBLOCK: |
| regs->flags |= PT_FLAGS_CALLER_SAVES; |
| regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall; |
| regs->pc -= 8; |
| break; |
| } |
| } |
| |
| /* If there's no signal to deliver, just put the saved sigmask back. */ |
| restore_saved_sigmask(); |
| |
| done: |
| /* Avoid double syscall restart if there are nested signals. */ |
| regs->faultnum = INT_SWINT_1_SIGRETURN; |
| } |
| |
| int show_unhandled_signals = 1; |
| |
| static int __init crashinfo(char *str) |
| { |
| unsigned long val; |
| const char *word; |
| |
| if (*str == '\0') |
| val = 2; |
| else if (*str != '=' || strict_strtoul(++str, 0, &val) != 0) |
| return 0; |
| show_unhandled_signals = val; |
| switch (show_unhandled_signals) { |
| case 0: |
| word = "No"; |
| break; |
| case 1: |
| word = "One-line"; |
| break; |
| default: |
| word = "Detailed"; |
| break; |
| } |
| pr_info("%s crash reports will be generated on the console\n", word); |
| return 1; |
| } |
| __setup("crashinfo", crashinfo); |
| |
| static void dump_mem(void __user *address) |
| { |
| void __user *addr; |
| enum { region_size = 256, bytes_per_line = 16 }; |
| int i, j, k; |
| int found_readable_mem = 0; |
| |
| pr_err("\n"); |
| if (!access_ok(VERIFY_READ, address, 1)) { |
| pr_err("Not dumping at address 0x%lx (kernel address)\n", |
| (unsigned long)address); |
| return; |
| } |
| |
| addr = (void __user *) |
| (((unsigned long)address & -bytes_per_line) - region_size/2); |
| if (addr > address) |
| addr = NULL; |
| for (i = 0; i < region_size; |
| addr += bytes_per_line, i += bytes_per_line) { |
| unsigned char buf[bytes_per_line]; |
| char line[100]; |
| if (copy_from_user(buf, addr, bytes_per_line)) |
| continue; |
| if (!found_readable_mem) { |
| pr_err("Dumping memory around address 0x%lx:\n", |
| (unsigned long)address); |
| found_readable_mem = 1; |
| } |
| j = sprintf(line, REGFMT":", (unsigned long)addr); |
| for (k = 0; k < bytes_per_line; ++k) |
| j += sprintf(&line[j], " %02x", buf[k]); |
| pr_err("%s\n", line); |
| } |
| if (!found_readable_mem) |
| pr_err("No readable memory around address 0x%lx\n", |
| (unsigned long)address); |
| } |
| |
| void trace_unhandled_signal(const char *type, struct pt_regs *regs, |
| unsigned long address, int sig) |
| { |
| struct task_struct *tsk = current; |
| |
| if (show_unhandled_signals == 0) |
| return; |
| |
| /* If the signal is handled, don't show it here. */ |
| if (!is_global_init(tsk)) { |
| void __user *handler = |
| tsk->sighand->action[sig-1].sa.sa_handler; |
| if (handler != SIG_IGN && handler != SIG_DFL) |
| return; |
| } |
| |
| /* Rate-limit the one-line output, not the detailed output. */ |
| if (show_unhandled_signals <= 1 && !printk_ratelimit()) |
| return; |
| |
| printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d", |
| task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, |
| tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig); |
| |
| print_vma_addr(KERN_CONT " in ", regs->pc); |
| |
| printk(KERN_CONT "\n"); |
| |
| if (show_unhandled_signals > 1) { |
| switch (sig) { |
| case SIGILL: |
| case SIGFPE: |
| case SIGSEGV: |
| case SIGBUS: |
| pr_err("User crash: signal %d," |
| " trap %ld, address 0x%lx\n", |
| sig, regs->faultnum, address); |
| show_regs(regs); |
| dump_mem((void __user *)address); |
| break; |
| default: |
| pr_err("User crash: signal %d, trap %ld\n", |
| sig, regs->faultnum); |
| break; |
| } |
| } |
| } |