| /* |
| * TI OMAP1 Real Time Clock interface for Linux |
| * |
| * Copyright (C) 2003 MontaVista Software, Inc. |
| * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com> |
| * |
| * Copyright (C) 2006 David Brownell (new RTC framework) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/io.h> |
| #include <asm/mach/time.h> |
| |
| |
| /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock |
| * with century-range alarm matching, driven by the 32kHz clock. |
| * |
| * The main user-visible ways it differs from PC RTCs are by omitting |
| * "don't care" alarm fields and sub-second periodic IRQs, and having |
| * an autoadjust mechanism to calibrate to the true oscillator rate. |
| * |
| * Board-specific wiring options include using split power mode with |
| * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset), |
| * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from |
| * low power modes). See the BOARD-SPECIFIC CUSTOMIZATION comment. |
| */ |
| |
| #define OMAP_RTC_BASE 0xfffb4800 |
| |
| /* RTC registers */ |
| #define OMAP_RTC_SECONDS_REG 0x00 |
| #define OMAP_RTC_MINUTES_REG 0x04 |
| #define OMAP_RTC_HOURS_REG 0x08 |
| #define OMAP_RTC_DAYS_REG 0x0C |
| #define OMAP_RTC_MONTHS_REG 0x10 |
| #define OMAP_RTC_YEARS_REG 0x14 |
| #define OMAP_RTC_WEEKS_REG 0x18 |
| |
| #define OMAP_RTC_ALARM_SECONDS_REG 0x20 |
| #define OMAP_RTC_ALARM_MINUTES_REG 0x24 |
| #define OMAP_RTC_ALARM_HOURS_REG 0x28 |
| #define OMAP_RTC_ALARM_DAYS_REG 0x2c |
| #define OMAP_RTC_ALARM_MONTHS_REG 0x30 |
| #define OMAP_RTC_ALARM_YEARS_REG 0x34 |
| |
| #define OMAP_RTC_CTRL_REG 0x40 |
| #define OMAP_RTC_STATUS_REG 0x44 |
| #define OMAP_RTC_INTERRUPTS_REG 0x48 |
| |
| #define OMAP_RTC_COMP_LSB_REG 0x4c |
| #define OMAP_RTC_COMP_MSB_REG 0x50 |
| #define OMAP_RTC_OSC_REG 0x54 |
| |
| /* OMAP_RTC_CTRL_REG bit fields: */ |
| #define OMAP_RTC_CTRL_SPLIT (1<<7) |
| #define OMAP_RTC_CTRL_DISABLE (1<<6) |
| #define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5) |
| #define OMAP_RTC_CTRL_TEST (1<<4) |
| #define OMAP_RTC_CTRL_MODE_12_24 (1<<3) |
| #define OMAP_RTC_CTRL_AUTO_COMP (1<<2) |
| #define OMAP_RTC_CTRL_ROUND_30S (1<<1) |
| #define OMAP_RTC_CTRL_STOP (1<<0) |
| |
| /* OMAP_RTC_STATUS_REG bit fields: */ |
| #define OMAP_RTC_STATUS_POWER_UP (1<<7) |
| #define OMAP_RTC_STATUS_ALARM (1<<6) |
| #define OMAP_RTC_STATUS_1D_EVENT (1<<5) |
| #define OMAP_RTC_STATUS_1H_EVENT (1<<4) |
| #define OMAP_RTC_STATUS_1M_EVENT (1<<3) |
| #define OMAP_RTC_STATUS_1S_EVENT (1<<2) |
| #define OMAP_RTC_STATUS_RUN (1<<1) |
| #define OMAP_RTC_STATUS_BUSY (1<<0) |
| |
| /* OMAP_RTC_INTERRUPTS_REG bit fields: */ |
| #define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3) |
| #define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2) |
| |
| |
| #define rtc_read(addr) omap_readb(OMAP_RTC_BASE + (addr)) |
| #define rtc_write(val, addr) omap_writeb(val, OMAP_RTC_BASE + (addr)) |
| |
| |
| /* platform_bus isn't hotpluggable, so for static linkage it'd be safe |
| * to get rid of probe() and remove() code ... too bad the driver struct |
| * remembers probe(), that's about 25% of the runtime footprint!! |
| */ |
| #ifndef MODULE |
| #undef __devexit |
| #undef __devexit_p |
| #define __devexit __exit |
| #define __devexit_p __exit_p |
| #endif |
| |
| |
| /* we rely on the rtc framework to handle locking (rtc->ops_lock), |
| * so the only other requirement is that register accesses which |
| * require BUSY to be clear are made with IRQs locally disabled |
| */ |
| static void rtc_wait_not_busy(void) |
| { |
| int count = 0; |
| u8 status; |
| |
| /* BUSY may stay active for 1/32768 second (~30 usec) */ |
| for (count = 0; count < 50; count++) { |
| status = rtc_read(OMAP_RTC_STATUS_REG); |
| if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0) |
| break; |
| udelay(1); |
| } |
| /* now we have ~15 usec to read/write various registers */ |
| } |
| |
| static irqreturn_t rtc_irq(int irq, void *rtc) |
| { |
| unsigned long events = 0; |
| u8 irq_data; |
| |
| irq_data = rtc_read(OMAP_RTC_STATUS_REG); |
| |
| /* alarm irq? */ |
| if (irq_data & OMAP_RTC_STATUS_ALARM) { |
| rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG); |
| events |= RTC_IRQF | RTC_AF; |
| } |
| |
| /* 1/sec periodic/update irq? */ |
| if (irq_data & OMAP_RTC_STATUS_1S_EVENT) |
| events |= RTC_IRQF | RTC_UF; |
| |
| rtc_update_irq(rtc, 1, events); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_RTC_INTF_DEV |
| |
| static int |
| omap_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| u8 reg; |
| |
| switch (cmd) { |
| case RTC_AIE_OFF: |
| case RTC_AIE_ON: |
| case RTC_UIE_OFF: |
| case RTC_UIE_ON: |
| break; |
| default: |
| return -ENOIOCTLCMD; |
| } |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(); |
| reg = rtc_read(OMAP_RTC_INTERRUPTS_REG); |
| switch (cmd) { |
| /* AIE = Alarm Interrupt Enable */ |
| case RTC_AIE_OFF: |
| reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM; |
| break; |
| case RTC_AIE_ON: |
| reg |= OMAP_RTC_INTERRUPTS_IT_ALARM; |
| break; |
| /* UIE = Update Interrupt Enable (1/second) */ |
| case RTC_UIE_OFF: |
| reg &= ~OMAP_RTC_INTERRUPTS_IT_TIMER; |
| break; |
| case RTC_UIE_ON: |
| reg |= OMAP_RTC_INTERRUPTS_IT_TIMER; |
| break; |
| } |
| rtc_wait_not_busy(); |
| rtc_write(reg, OMAP_RTC_INTERRUPTS_REG); |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| #else |
| #define omap_rtc_ioctl NULL |
| #endif |
| |
| /* this hardware doesn't support "don't care" alarm fields */ |
| static int tm2bcd(struct rtc_time *tm) |
| { |
| if (rtc_valid_tm(tm) != 0) |
| return -EINVAL; |
| |
| tm->tm_sec = BIN2BCD(tm->tm_sec); |
| tm->tm_min = BIN2BCD(tm->tm_min); |
| tm->tm_hour = BIN2BCD(tm->tm_hour); |
| tm->tm_mday = BIN2BCD(tm->tm_mday); |
| |
| tm->tm_mon = BIN2BCD(tm->tm_mon + 1); |
| |
| /* epoch == 1900 */ |
| if (tm->tm_year < 100 || tm->tm_year > 199) |
| return -EINVAL; |
| tm->tm_year = BIN2BCD(tm->tm_year - 100); |
| |
| return 0; |
| } |
| |
| static void bcd2tm(struct rtc_time *tm) |
| { |
| tm->tm_sec = BCD2BIN(tm->tm_sec); |
| tm->tm_min = BCD2BIN(tm->tm_min); |
| tm->tm_hour = BCD2BIN(tm->tm_hour); |
| tm->tm_mday = BCD2BIN(tm->tm_mday); |
| tm->tm_mon = BCD2BIN(tm->tm_mon) - 1; |
| /* epoch == 1900 */ |
| tm->tm_year = BCD2BIN(tm->tm_year) + 100; |
| } |
| |
| |
| static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| /* we don't report wday/yday/isdst ... */ |
| local_irq_disable(); |
| rtc_wait_not_busy(); |
| |
| tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG); |
| tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG); |
| tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG); |
| tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG); |
| tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG); |
| tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG); |
| |
| local_irq_enable(); |
| |
| bcd2tm(tm); |
| return 0; |
| } |
| |
| static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| if (tm2bcd(tm) < 0) |
| return -EINVAL; |
| local_irq_disable(); |
| rtc_wait_not_busy(); |
| |
| rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG); |
| rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG); |
| rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG); |
| rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG); |
| rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG); |
| rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG); |
| |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| local_irq_disable(); |
| rtc_wait_not_busy(); |
| |
| alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG); |
| alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG); |
| alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG); |
| alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG); |
| alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG); |
| alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG); |
| |
| local_irq_enable(); |
| |
| bcd2tm(&alm->time); |
| alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG) |
| & OMAP_RTC_INTERRUPTS_IT_ALARM); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| u8 reg; |
| |
| if (tm2bcd(&alm->time) < 0) |
| return -EINVAL; |
| |
| local_irq_disable(); |
| rtc_wait_not_busy(); |
| |
| rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG); |
| rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG); |
| rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG); |
| rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG); |
| rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG); |
| rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG); |
| |
| reg = rtc_read(OMAP_RTC_INTERRUPTS_REG); |
| if (alm->enabled) |
| reg |= OMAP_RTC_INTERRUPTS_IT_ALARM; |
| else |
| reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM; |
| rtc_write(reg, OMAP_RTC_INTERRUPTS_REG); |
| |
| local_irq_enable(); |
| |
| return 0; |
| } |
| |
| static struct rtc_class_ops omap_rtc_ops = { |
| .ioctl = omap_rtc_ioctl, |
| .read_time = omap_rtc_read_time, |
| .set_time = omap_rtc_set_time, |
| .read_alarm = omap_rtc_read_alarm, |
| .set_alarm = omap_rtc_set_alarm, |
| }; |
| |
| static int omap_rtc_alarm; |
| static int omap_rtc_timer; |
| |
| static int __devinit omap_rtc_probe(struct platform_device *pdev) |
| { |
| struct resource *res, *mem; |
| struct rtc_device *rtc; |
| u8 reg, new_ctrl; |
| |
| omap_rtc_timer = platform_get_irq(pdev, 0); |
| if (omap_rtc_timer <= 0) { |
| pr_debug("%s: no update irq?\n", pdev->name); |
| return -ENOENT; |
| } |
| |
| omap_rtc_alarm = platform_get_irq(pdev, 1); |
| if (omap_rtc_alarm <= 0) { |
| pr_debug("%s: no alarm irq?\n", pdev->name); |
| return -ENOENT; |
| } |
| |
| /* NOTE: using static mapping for RTC registers */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res && res->start != OMAP_RTC_BASE) { |
| pr_debug("%s: RTC registers at %08x, expected %08x\n", |
| pdev->name, (unsigned) res->start, OMAP_RTC_BASE); |
| return -ENOENT; |
| } |
| |
| if (res) |
| mem = request_mem_region(res->start, |
| res->end - res->start + 1, |
| pdev->name); |
| else |
| mem = NULL; |
| if (!mem) { |
| pr_debug("%s: RTC registers at %08x are not free\n", |
| pdev->name, OMAP_RTC_BASE); |
| return -EBUSY; |
| } |
| |
| rtc = rtc_device_register(pdev->name, &pdev->dev, |
| &omap_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| pr_debug("%s: can't register RTC device, err %ld\n", |
| pdev->name, PTR_ERR(rtc)); |
| goto fail; |
| } |
| platform_set_drvdata(pdev, rtc); |
| dev_set_drvdata(&rtc->dev, mem); |
| |
| /* clear pending irqs, and set 1/second periodic, |
| * which we'll use instead of update irqs |
| */ |
| rtc_write(0, OMAP_RTC_INTERRUPTS_REG); |
| |
| /* clear old status */ |
| reg = rtc_read(OMAP_RTC_STATUS_REG); |
| if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) { |
| pr_info("%s: RTC power up reset detected\n", |
| pdev->name); |
| rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG); |
| } |
| if (reg & (u8) OMAP_RTC_STATUS_ALARM) |
| rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG); |
| |
| /* handle periodic and alarm irqs */ |
| if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED, |
| rtc->dev.bus_id, rtc)) { |
| pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n", |
| pdev->name, omap_rtc_timer); |
| goto fail0; |
| } |
| if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED, |
| rtc->dev.bus_id, rtc)) { |
| pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n", |
| pdev->name, omap_rtc_alarm); |
| goto fail1; |
| } |
| |
| /* On boards with split power, RTC_ON_NOFF won't reset the RTC */ |
| reg = rtc_read(OMAP_RTC_CTRL_REG); |
| if (reg & (u8) OMAP_RTC_CTRL_STOP) |
| pr_info("%s: already running\n", pdev->name); |
| |
| /* force to 24 hour mode */ |
| new_ctrl = reg & ~(OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP); |
| new_ctrl |= OMAP_RTC_CTRL_STOP; |
| |
| /* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE: |
| * |
| * - Boards wired so that RTC_WAKE_INT does something, and muxed |
| * right (W13_1610_RTC_WAKE_INT is the default after chip reset), |
| * should initialize the device wakeup flag appropriately. |
| * |
| * - Boards wired so RTC_ON_nOFF is used as the reset signal, |
| * rather than nPWRON_RESET, should forcibly enable split |
| * power mode. (Some chip errata report that RTC_CTRL_SPLIT |
| * is write-only, and always reads as zero...) |
| */ |
| device_init_wakeup(&pdev->dev, 0); |
| |
| if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT) |
| pr_info("%s: split power mode\n", pdev->name); |
| |
| if (reg != new_ctrl) |
| rtc_write(new_ctrl, OMAP_RTC_CTRL_REG); |
| |
| return 0; |
| |
| fail1: |
| free_irq(omap_rtc_timer, NULL); |
| fail0: |
| rtc_device_unregister(rtc); |
| fail: |
| release_resource(mem); |
| return -EIO; |
| } |
| |
| static int __devexit omap_rtc_remove(struct platform_device *pdev) |
| { |
| struct rtc_device *rtc = platform_get_drvdata(pdev);; |
| |
| device_init_wakeup(&pdev->dev, 0); |
| |
| /* leave rtc running, but disable irqs */ |
| rtc_write(0, OMAP_RTC_INTERRUPTS_REG); |
| |
| free_irq(omap_rtc_timer, rtc); |
| free_irq(omap_rtc_alarm, rtc); |
| |
| release_resource(dev_get_drvdata(&rtc->dev)); |
| rtc_device_unregister(rtc); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static u8 irqstat; |
| |
| static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG); |
| |
| /* FIXME the RTC alarm is not currently acting as a wakeup event |
| * source, and in fact this enable() call is just saving a flag |
| * that's never used... |
| */ |
| if (device_may_wakeup(&pdev->dev)) |
| enable_irq_wake(omap_rtc_alarm); |
| else |
| rtc_write(0, OMAP_RTC_INTERRUPTS_REG); |
| |
| return 0; |
| } |
| |
| static int omap_rtc_resume(struct platform_device *pdev) |
| { |
| if (device_may_wakeup(&pdev->dev)) |
| disable_irq_wake(omap_rtc_alarm); |
| else |
| rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG); |
| return 0; |
| } |
| |
| #else |
| #define omap_rtc_suspend NULL |
| #define omap_rtc_resume NULL |
| #endif |
| |
| static void omap_rtc_shutdown(struct platform_device *pdev) |
| { |
| rtc_write(0, OMAP_RTC_INTERRUPTS_REG); |
| } |
| |
| MODULE_ALIAS("omap_rtc"); |
| static struct platform_driver omap_rtc_driver = { |
| .probe = omap_rtc_probe, |
| .remove = __devexit_p(omap_rtc_remove), |
| .suspend = omap_rtc_suspend, |
| .resume = omap_rtc_resume, |
| .shutdown = omap_rtc_shutdown, |
| .driver = { |
| .name = "omap_rtc", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init rtc_init(void) |
| { |
| return platform_driver_register(&omap_rtc_driver); |
| } |
| module_init(rtc_init); |
| |
| static void __exit rtc_exit(void) |
| { |
| platform_driver_unregister(&omap_rtc_driver); |
| } |
| module_exit(rtc_exit); |
| |
| MODULE_AUTHOR("George G. Davis (and others)"); |
| MODULE_LICENSE("GPL"); |