| /* linux/arch/arm/plat-samsung/include/plat/irqs.h |
| * |
| * Copyright (c) 2009 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com/ |
| * |
| * S5P Common IRQ support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __PLAT_SAMSUNG_IRQS_H |
| #define __PLAT_SAMSUNG_IRQS_H __FILE__ |
| |
| /* we keep the first set of CPU IRQs out of the range of |
| * the ISA space, so that the PC104 has them to itself |
| * and we don't end up having to do horrible things to the |
| * standard ISA drivers.... |
| * |
| * note, since we're using the VICs, our start must be a |
| * mulitple of 32 to allow the common code to work |
| */ |
| |
| #define S5P_IRQ_OFFSET (32) |
| |
| #define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) |
| |
| #define S5P_VIC0_BASE S5P_IRQ(0) |
| #define S5P_VIC1_BASE S5P_IRQ(32) |
| #define S5P_VIC2_BASE S5P_IRQ(64) |
| #define S5P_VIC3_BASE S5P_IRQ(96) |
| |
| #define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) |
| |
| #define IRQ_VIC0_BASE S5P_VIC0_BASE |
| #define IRQ_VIC1_BASE S5P_VIC1_BASE |
| #define IRQ_VIC2_BASE S5P_VIC2_BASE |
| |
| /* VIC based IRQs */ |
| |
| #define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) |
| #define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) |
| #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) |
| #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) |
| |
| #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ |
| : ((x) - 16 + S5P_EINT_BASE2)) |
| |
| #define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ |
| ((irq) - S5P_EINT_BASE1) : \ |
| ((irq) + 16 - S5P_EINT_BASE2)) |
| |
| #define IRQ_EINT_BIT(x) EINT_OFFSET(x) |
| |
| /* Typically only a few gpio chips require gpio interrupt support. |
| To avoid memory waste irq descriptors are allocated only for |
| S5P_GPIOINT_GROUP_COUNT chips, each with total number of |
| S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged |
| to any gpio chip with the s5p_register_gpio_interrupt() function */ |
| #define S5P_GPIOINT_GROUP_COUNT 4 |
| #define S5P_GPIOINT_GROUP_SIZE 8 |
| #define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) |
| |
| /* IRQ types common for all s5p platforms */ |
| #define S5P_IRQ_TYPE_LEVEL_LOW (0x00) |
| #define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) |
| #define S5P_IRQ_TYPE_EDGE_FALLING (0x02) |
| #define S5P_IRQ_TYPE_EDGE_RISING (0x03) |
| #define S5P_IRQ_TYPE_EDGE_BOTH (0x04) |
| |
| #endif /* __PLAT_SAMSUNG_IRQS_H */ |