| if ARCH_PXA |
| |
| menu "Intel PXA2xx/PXA3xx Implementations" |
| |
| comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" |
| |
| config MACH_PXA3XX_DT |
| bool "Support PXA3xx platforms from device tree" |
| select CPU_PXA300 |
| select POWER_SUPPLY |
| select PXA3xx |
| select USE_OF |
| help |
| Include support for Marvell PXA3xx based platforms using |
| the device tree. Needn't select any other machine while |
| MACH_PXA3XX_DT is enabled. |
| |
| config ARCH_LUBBOCK |
| bool "Intel DBPXA250 Development Platform (aka Lubbock)" |
| select PXA25x |
| select SA1111 |
| |
| config MACH_MAINSTONE |
| bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" |
| select PXA27x |
| |
| config MACH_ZYLONITE |
| bool |
| select PXA3xx |
| |
| config MACH_ZYLONITE300 |
| bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" |
| select CPU_PXA300 |
| select CPU_PXA310 |
| select MACH_ZYLONITE |
| |
| config MACH_ZYLONITE320 |
| bool "PXA3xx Development Platform (aka Zylonite) PXA320" |
| select CPU_PXA320 |
| select MACH_ZYLONITE |
| |
| config MACH_LITTLETON |
| bool "PXA3xx Form Factor Platform (aka Littleton)" |
| select CPU_PXA300 |
| select CPU_PXA310 |
| select PXA3xx |
| |
| config MACH_TAVOREVB |
| bool "PXA930 Evaluation Board (aka TavorEVB)" |
| select CPU_PXA930 |
| select CPU_PXA935 |
| select PXA3xx |
| select FB |
| select FB_PXA |
| |
| config MACH_SAAR |
| bool "PXA930 Handheld Platform (aka SAAR)" |
| select CPU_PXA930 |
| select CPU_PXA935 |
| select PXA3xx |
| select FB |
| select FB_PXA |
| |
| comment "Third Party Dev Platforms (sorted by vendor name)" |
| |
| config ARCH_PXA_IDP |
| bool "Accelent Xscale IDP" |
| select PXA25x |
| |
| config ARCH_VIPER |
| bool "Arcom/Eurotech VIPER SBC" |
| select ARCOM_PCMCIA |
| select I2C_GPIO if I2C=y |
| select ISA |
| select PXA25x |
| select PXA_HAVE_ISA_IRQS |
| |
| config MACH_ARCOM_ZEUS |
| bool "Arcom/Eurotech ZEUS SBC" |
| select ARCOM_PCMCIA |
| select ISA |
| select PXA27x |
| select PXA_HAVE_ISA_IRQS |
| |
| config MACH_BALLOON3 |
| bool "Balloon 3 board" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_CSB726 |
| bool "Enable Cogent CSB726 System On a Module" |
| select IWMMXT |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on a Cogent |
| CSB726 System On Module. |
| |
| config CSB726_CSB701 |
| bool "Enable support for CSB701 baseboard" |
| depends on MACH_CSB726 |
| |
| config MACH_ARMCORE |
| bool "CompuLab CM-X255/CM-X270 modules" |
| select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI |
| select IWMMXT |
| select MIGHT_HAVE_PCI |
| select NEED_MACH_IO_H if PCI |
| select PXA25x |
| select PXA27x |
| |
| config MACH_EM_X270 |
| bool "CompuLab EM-x270 platform" |
| select PXA27x |
| |
| config MACH_EXEDA |
| bool "CompuLab eXeda platform" |
| select PXA27x |
| |
| config MACH_CM_X300 |
| bool "CompuLab CM-X300 modules" |
| select CPU_PXA300 |
| select CPU_PXA310 |
| select PXA3xx |
| |
| config MACH_CAPC7117 |
| bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" |
| select CPU_PXA320 |
| select PXA3xx |
| |
| config ARCH_GUMSTIX |
| bool "Gumstix XScale 255 boards" |
| select PXA25x |
| help |
| Say Y here if you intend to run this kernel on |
| Basix, Connex, ws-200ax, ws-400ax systems |
| |
| choice |
| prompt "Gumstix Carrier/Expansion Board" |
| depends on ARCH_GUMSTIX |
| |
| config GUMSTIX_AM200EPD |
| bool "Enable AM200EPD board support" |
| |
| config GUMSTIX_AM300EPD |
| bool "Enable AM300EPD board support" |
| |
| endchoice |
| |
| config MACH_INTELMOTE2 |
| bool "Intel Mote 2 Platform" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_STARGATE2 |
| bool "Intel Stargate 2 Platform" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_XCEP |
| bool "Iskratel Electronics XCEP" |
| select MTD |
| select MTD_CFI |
| select MTD_CFI_INTELEXT |
| select MTD_PHYSMAP |
| select PXA25x |
| help |
| PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. |
| Tuned for usage in Libera instruments for particle accelerators. |
| |
| config TRIZEPS_PXA |
| bool "PXA based Keith und Koep Trizeps DIMM-Modules" |
| |
| config MACH_TRIZEPS4 |
| bool "Keith und Koep Trizeps4 DIMM-Module" |
| depends on TRIZEPS_PXA |
| select PXA27x |
| select TRIZEPS_PCMCIA |
| |
| config MACH_TRIZEPS4WL |
| bool "Keith und Koep Trizeps4-WL DIMM-Module" |
| depends on TRIZEPS_PXA |
| select MACH_TRIZEPS4 |
| select PXA27x |
| select TRIZEPS_PCMCIA |
| |
| choice |
| prompt "Select base board for Trizeps module" |
| depends on TRIZEPS_PXA |
| |
| config MACH_TRIZEPS_CONXS |
| bool "ConXS Eval Board" |
| |
| config MACH_TRIZEPS_UCONXS |
| bool "uConXS Eval Board" |
| |
| config MACH_TRIZEPS_ANY |
| bool "another Board" |
| |
| endchoice |
| |
| config ARCOM_PCMCIA |
| bool |
| help |
| Generic option for Arcom Viper/Zeus PCMCIA |
| |
| config TRIZEPS_PCMCIA |
| bool |
| help |
| Enable PCMCIA support for Trizeps modules |
| |
| config MACH_LOGICPD_PXA270 |
| bool "LogicPD PXA270 Card Engine Development Platform" |
| select PXA27x |
| |
| config MACH_PCM027 |
| bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_PCM990_BASEBOARD |
| bool "PHYTEC PCM-990 development board" |
| depends on MACH_PCM027 |
| |
| choice |
| prompt "display on pcm990" |
| depends on MACH_PCM990_BASEBOARD |
| |
| config PCM990_DISPLAY_SHARP |
| bool "sharp lq084v1dg21 stn display" |
| |
| config PCM990_DISPLAY_NEC |
| bool "nec nl6448bc20_18d tft display" |
| |
| config PCM990_DISPLAY_NONE |
| bool "no display" |
| |
| endchoice |
| |
| config MACH_COLIBRI |
| bool "Toradex Colibri PXA270" |
| select PXA27x |
| |
| config MACH_COLIBRI_PXA270_INCOME |
| bool "Income s.r.o. PXA270 SBC" |
| depends on MACH_COLIBRI |
| select PXA27x |
| |
| config MACH_COLIBRI300 |
| bool "Toradex Colibri PXA300/310" |
| select CPU_PXA300 |
| select CPU_PXA310 |
| select PXA3xx |
| |
| config MACH_COLIBRI320 |
| bool "Toradex Colibri PXA320" |
| select CPU_PXA320 |
| select PXA3xx |
| |
| config MACH_COLIBRI_EVALBOARD |
| bool "Toradex Colibri Evaluation Carrier Board support" |
| depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 |
| |
| config MACH_VPAC270 |
| bool "Voipac PXA270" |
| select HAVE_PATA_PLATFORM |
| select PXA27x |
| help |
| PXA270 based Single Board Computer. |
| |
| comment "End-user Products (sorted by vendor name)" |
| |
| config MACH_H4700 |
| bool "HP iPAQ hx4700" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_H5000 |
| bool "HP iPAQ h5000" |
| select PXA25x |
| |
| config MACH_HIMALAYA |
| bool "HTC Himalaya Support" |
| select CPU_PXA26x |
| |
| config MACH_MAGICIAN |
| bool "Enable HTC Magician Support" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_MIOA701 |
| bool "Mitac Mio A701 Support" |
| select GPIO_SYSFS |
| select IWMMXT |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on a |
| MIO A701. Currently there is only basic support |
| for this PDA. |
| |
| config PXA_EZX |
| bool "Motorola EZX Platform" |
| select IWMMXT |
| select PXA27x |
| |
| config MACH_EZX_A780 |
| bool "Motorola EZX A780" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E680 |
| bool "Motorola EZX E680" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_A1200 |
| bool "Motorola EZX A1200" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_A910 |
| bool "Motorola EZX A910" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E6 |
| bool "Motorola EZX E6" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E2 |
| bool "Motorola EZX E2" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_MP900C |
| bool "Nec Mobilepro 900/c" |
| select PXA25x |
| |
| config ARCH_PXA_PALM |
| bool "PXA based Palm PDAs" |
| |
| config MACH_PALM27X |
| bool |
| |
| config MACH_PALMTE2 |
| bool "Palm Tungsten|E2" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA25x |
| help |
| Say Y here if you intend to run this kernel on a Palm Tungsten|E2 |
| handheld computer. |
| |
| config MACH_PALMTC |
| bool "Palm Tungsten|C" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA25x |
| help |
| Say Y here if you intend to run this kernel on a Palm Tungsten|C |
| handheld computer. |
| |
| config MACH_PALMT5 |
| bool "Palm Tungsten|T5" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on a Palm Tungsten|T5 |
| handheld computer. |
| |
| config MACH_PALMTX |
| bool "Palm T|X" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on a Palm T|X |
| handheld computer. |
| |
| config MACH_PALMZ72 |
| bool "Palm Zire 72" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on Palm Zire 72 |
| handheld computer. |
| |
| config MACH_PALMLD |
| bool "Palm LifeDrive" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on a Palm LifeDrive |
| handheld computer. |
| |
| config PALM_TREO |
| bool |
| depends on ARCH_PXA_PALM |
| |
| config MACH_CENTRO |
| bool "Palm Centro 685 (GSM)" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PALM_TREO |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) |
| smartphone. |
| |
| config MACH_TREO680 |
| bool "Palm Treo 680" |
| default y |
| depends on ARCH_PXA_PALM |
| select IWMMXT |
| select MACH_PALM27X |
| select PALM_TREO |
| select PXA27x |
| help |
| Say Y here if you intend to run this kernel on Palm Treo 680 |
| smartphone. |
| |
| config MACH_RAUMFELD_RC |
| bool "Raumfeld Controller" |
| select CPU_PXA300 |
| select POWER_SUPPLY |
| select PXA3xx |
| |
| config MACH_RAUMFELD_CONNECTOR |
| bool "Raumfeld Connector" |
| select CPU_PXA300 |
| select POWER_SUPPLY |
| select PXA3xx |
| |
| config MACH_RAUMFELD_SPEAKER |
| bool "Raumfeld Speaker" |
| select CPU_PXA300 |
| select POWER_SUPPLY |
| select PXA3xx |
| |
| config PXA_SHARPSL |
| bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" |
| select SHARP_PARAM |
| select SHARP_SCOOP |
| help |
| Say Y here if you intend to run this kernel on a |
| Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), |
| SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), |
| SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) |
| handheld computer. |
| |
| config PXA_SHARPSL_DETECT_MACH_ID |
| bool "Detect machine ID at run-time in the decompressor" |
| depends on PXA_SHARPSL |
| help |
| Say Y here if you want the zImage decompressor to detect |
| the Zaurus machine ID at run-time. For latest kexec-based |
| boot loader, this is not necessary. |
| |
| config MACH_POODLE |
| bool "Enable Sharp SL-5600 (Poodle) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select SHARP_LOCOMO |
| |
| config MACH_CORGI |
| bool "Enable Sharp SL-C700 (Corgi) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_SHEPHERD |
| bool "Enable Sharp SL-C750 (Shepherd) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_HUSKY |
| bool "Enable Sharp SL-C760 (Husky) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_AKITA |
| bool "Enable Sharp SL-1000 (Akita) Support" |
| depends on PXA_SHARPSL |
| select I2C |
| select I2C_PXA |
| select MACH_SPITZ |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_SPITZ |
| bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" |
| depends on PXA_SHARPSL |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_BORZOI |
| bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" |
| depends on PXA_SHARPSL |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_TOSA |
| bool "Enable Sharp SL-6000x (Tosa) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| |
| config TOSA_BT |
| tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" |
| depends on MACH_TOSA |
| select RFKILL |
| help |
| This is a simple driver that is able to control |
| the state of built in bluetooth chip on tosa. |
| |
| config TOSA_USE_EXT_KEYCODES |
| bool "Tosa keyboard: use extended keycodes" |
| depends on MACH_TOSA |
| default n |
| help |
| Say Y here to enable the tosa keyboard driver to generate extended |
| (>= 127) keycodes. Be aware, that they can't be correctly interpreted |
| by either console keyboard driver or by Kdrive keybd driver. |
| |
| Say Y only if you know, what you are doing! |
| |
| config MACH_ICONTROL |
| bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" |
| select CPU_PXA320 |
| select PXA3xx |
| |
| config ARCH_PXA_ESERIES |
| bool "PXA based Toshiba e-series PDAs" |
| select FB_W100 |
| select PXA25x |
| |
| config MACH_E330 |
| bool "Toshiba e330" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e330 family PDA. |
| |
| config MACH_E350 |
| bool "Toshiba e350" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e350 family PDA. |
| |
| config MACH_E740 |
| bool "Toshiba e740" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e740 family PDA. |
| |
| config MACH_E750 |
| bool "Toshiba e750" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e750 family PDA. |
| |
| config MACH_E400 |
| bool "Toshiba e400" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e400 family PDA. |
| |
| config MACH_E800 |
| bool "Toshiba e800" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e800 family PDA. |
| |
| config MACH_ZIPIT2 |
| bool "Zipit Z2 Handheld" |
| select PXA27x |
| endmenu |
| |
| config PXA25x |
| bool |
| select CPU_XSCALE |
| help |
| Select code specific to PXA21x/25x/26x variants |
| |
| config PXA27x |
| bool |
| select CPU_XSCALE |
| help |
| Select code specific to PXA27x variants |
| |
| config CPU_PXA26x |
| bool |
| select PXA25x |
| help |
| Select code specific to PXA26x (codename Dalhart) |
| |
| config PXA3xx |
| bool |
| select CPU_XSC3 |
| help |
| Select code specific to PXA3xx variants |
| |
| config CPU_PXA300 |
| bool |
| select PXA3xx |
| help |
| PXA300 (codename Monahans-L) |
| |
| config CPU_PXA310 |
| bool |
| select CPU_PXA300 |
| select PXA310_ULPI if USB_ULPI |
| help |
| PXA310 (codename Monahans-LV) |
| |
| config CPU_PXA320 |
| bool |
| select PXA3xx |
| help |
| PXA320 (codename Monahans-P) |
| |
| config CPU_PXA930 |
| bool |
| select PXA3xx |
| help |
| PXA930 (codename Tavor-P) |
| |
| config CPU_PXA935 |
| bool |
| select CPU_PXA930 |
| help |
| PXA935 (codename Tavor-P65) |
| |
| config PXA_SHARP_C7xx |
| bool |
| select SHARPSL_PM |
| help |
| Enable support for all Sharp C7xx models |
| |
| config PXA_SHARP_Cxx00 |
| bool |
| select SHARPSL_PM |
| help |
| Enable common support for Sharp Cxx00 models |
| |
| config SHARPSL_PM |
| bool |
| select APM_EMULATION |
| select SHARPSL_PM_MAX1111 |
| |
| config SHARPSL_PM_MAX1111 |
| bool |
| select HWMON |
| select SENSORS_MAX1111 |
| select SPI |
| select SPI_MASTER |
| |
| config PXA_HAVE_ISA_IRQS |
| bool |
| |
| config PXA310_ULPI |
| bool |
| |
| endif |
