| /* |
| * PCI code for the Freescale MPC52xx embedded CPU. |
| * |
| * Copyright (C) 2006 Secret Lab Technologies Ltd. |
| * Grant Likely <grant.likely@secretlab.ca> |
| * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #undef DEBUG |
| |
| #include <asm/pci.h> |
| #include <asm/mpc52xx.h> |
| #include <asm/delay.h> |
| #include <asm/machdep.h> |
| #include <linux/kernel.h> |
| |
| |
| /* ======================================================================== */ |
| /* PCI windows config */ |
| /* ======================================================================== */ |
| |
| #define MPC52xx_PCI_TARGET_IO 0xf0000000 |
| #define MPC52xx_PCI_TARGET_MEM 0x00000000 |
| |
| |
| /* ======================================================================== */ |
| /* Structures mapping & Defines for PCI Unit */ |
| /* ======================================================================== */ |
| |
| #define MPC52xx_PCI_GSCR_BM 0x40000000 |
| #define MPC52xx_PCI_GSCR_PE 0x20000000 |
| #define MPC52xx_PCI_GSCR_SE 0x10000000 |
| #define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000 |
| #define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24 |
| #define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000 |
| #define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16 |
| #define MPC52xx_PCI_GSCR_BME 0x00004000 |
| #define MPC52xx_PCI_GSCR_PEE 0x00002000 |
| #define MPC52xx_PCI_GSCR_SEE 0x00001000 |
| #define MPC52xx_PCI_GSCR_PR 0x00000001 |
| |
| |
| #define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \ |
| ( ( (proc_ad) & 0xff000000 ) | \ |
| ( (((size) - 1) >> 8) & 0x00ff0000 ) | \ |
| ( ((pci_ad) >> 16) & 0x0000ff00 ) ) |
| |
| #define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \ |
| ((win1) << 16) | \ |
| ((win2) << 8)) |
| |
| #define MPC52xx_PCI_IWCR_DISABLE 0x0 |
| #define MPC52xx_PCI_IWCR_ENABLE 0x1 |
| #define MPC52xx_PCI_IWCR_READ 0x0 |
| #define MPC52xx_PCI_IWCR_READ_LINE 0x2 |
| #define MPC52xx_PCI_IWCR_READ_MULTI 0x4 |
| #define MPC52xx_PCI_IWCR_MEM 0x0 |
| #define MPC52xx_PCI_IWCR_IO 0x8 |
| |
| #define MPC52xx_PCI_TCR_P 0x01000000 |
| #define MPC52xx_PCI_TCR_LD 0x00010000 |
| |
| #define MPC52xx_PCI_TBATR_DISABLE 0x0 |
| #define MPC52xx_PCI_TBATR_ENABLE 0x1 |
| |
| struct mpc52xx_pci { |
| u32 idr; /* PCI + 0x00 */ |
| u32 scr; /* PCI + 0x04 */ |
| u32 ccrir; /* PCI + 0x08 */ |
| u32 cr1; /* PCI + 0x0C */ |
| u32 bar0; /* PCI + 0x10 */ |
| u32 bar1; /* PCI + 0x14 */ |
| u8 reserved1[16]; /* PCI + 0x18 */ |
| u32 ccpr; /* PCI + 0x28 */ |
| u32 sid; /* PCI + 0x2C */ |
| u32 erbar; /* PCI + 0x30 */ |
| u32 cpr; /* PCI + 0x34 */ |
| u8 reserved2[4]; /* PCI + 0x38 */ |
| u32 cr2; /* PCI + 0x3C */ |
| u8 reserved3[32]; /* PCI + 0x40 */ |
| u32 gscr; /* PCI + 0x60 */ |
| u32 tbatr0; /* PCI + 0x64 */ |
| u32 tbatr1; /* PCI + 0x68 */ |
| u32 tcr; /* PCI + 0x6C */ |
| u32 iw0btar; /* PCI + 0x70 */ |
| u32 iw1btar; /* PCI + 0x74 */ |
| u32 iw2btar; /* PCI + 0x78 */ |
| u8 reserved4[4]; /* PCI + 0x7C */ |
| u32 iwcr; /* PCI + 0x80 */ |
| u32 icr; /* PCI + 0x84 */ |
| u32 isr; /* PCI + 0x88 */ |
| u32 arb; /* PCI + 0x8C */ |
| u8 reserved5[104]; /* PCI + 0x90 */ |
| u32 car; /* PCI + 0xF8 */ |
| u8 reserved6[4]; /* PCI + 0xFC */ |
| }; |
| |
| |
| /* ======================================================================== */ |
| /* PCI configuration acess */ |
| /* ======================================================================== */ |
| |
| static int |
| mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 *val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| u32 value; |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| out_be32(hose->cfg_addr, |
| (1 << 31) | |
| ((bus->number - hose->bus_offset) << 16) | |
| (devfn << 8) | |
| (offset & 0xfc)); |
| mb(); |
| |
| #if defined(CONFIG_PPC_MPC5200_BUGFIX) |
| if (bus->number != hose->bus_offset) { |
| /* workaround for the bug 435 of the MPC5200 (L25R); |
| * Don't do 32 bits config access during type-1 cycles */ |
| switch (len) { |
| case 1: |
| value = in_8(((u8 __iomem *)hose->cfg_data) + |
| (offset & 3)); |
| break; |
| case 2: |
| value = in_le16(((u16 __iomem *)hose->cfg_data) + |
| ((offset>>1) & 1)); |
| break; |
| |
| default: |
| value = in_le16((u16 __iomem *)hose->cfg_data) | |
| (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16); |
| break; |
| } |
| } |
| else |
| #endif |
| { |
| value = in_le32(hose->cfg_data); |
| |
| if (len != 4) { |
| value >>= ((offset & 0x3) << 3); |
| value &= 0xffffffff >> (32 - (len << 3)); |
| } |
| } |
| |
| *val = value; |
| |
| out_be32(hose->cfg_addr, 0); |
| mb(); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, |
| int offset, int len, u32 val) |
| { |
| struct pci_controller *hose = bus->sysdata; |
| u32 value, mask; |
| |
| if (ppc_md.pci_exclude_device) |
| if (ppc_md.pci_exclude_device(bus->number, devfn)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| out_be32(hose->cfg_addr, |
| (1 << 31) | |
| ((bus->number - hose->bus_offset) << 16) | |
| (devfn << 8) | |
| (offset & 0xfc)); |
| mb(); |
| |
| #if defined(CONFIG_PPC_MPC5200_BUGFIX) |
| if (bus->number != hose->bus_offset) { |
| /* workaround for the bug 435 of the MPC5200 (L25R); |
| * Don't do 32 bits config access during type-1 cycles */ |
| switch (len) { |
| case 1: |
| out_8(((u8 __iomem *)hose->cfg_data) + |
| (offset & 3), val); |
| break; |
| case 2: |
| out_le16(((u16 __iomem *)hose->cfg_data) + |
| ((offset>>1) & 1), val); |
| break; |
| |
| default: |
| out_le16((u16 __iomem *)hose->cfg_data, |
| (u16)val); |
| out_le16(((u16 __iomem *)hose->cfg_data) + 1, |
| (u16)(val>>16)); |
| break; |
| } |
| } |
| else |
| #endif |
| { |
| if (len != 4) { |
| value = in_le32(hose->cfg_data); |
| |
| offset = (offset & 0x3) << 3; |
| mask = (0xffffffff >> (32 - (len << 3))); |
| mask <<= offset; |
| |
| value &= ~mask; |
| val = value | ((val << offset) & mask); |
| } |
| |
| out_le32(hose->cfg_data, val); |
| } |
| mb(); |
| |
| out_be32(hose->cfg_addr, 0); |
| mb(); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops mpc52xx_pci_ops = { |
| .read = mpc52xx_pci_read_config, |
| .write = mpc52xx_pci_write_config |
| }; |
| |
| |
| /* ======================================================================== */ |
| /* PCI setup */ |
| /* ======================================================================== */ |
| |
| static void __init |
| mpc52xx_pci_setup(struct pci_controller *hose, |
| struct mpc52xx_pci __iomem *pci_regs) |
| { |
| struct resource *res; |
| u32 tmp; |
| int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0; |
| |
| pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs); |
| |
| /* pci_process_bridge_OF_ranges() found all our addresses for us; |
| * now store them in the right places */ |
| hose->cfg_addr = &pci_regs->car; |
| hose->cfg_data = hose->io_base_virt; |
| |
| /* Control regs */ |
| tmp = in_be32(&pci_regs->scr); |
| tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; |
| out_be32(&pci_regs->scr, tmp); |
| |
| /* Memory windows */ |
| res = &hose->mem_resources[0]; |
| if (res->flags) { |
| pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n", |
| res->start, res->end, res->flags); |
| out_be32(&pci_regs->iw0btar, |
| MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, |
| res->end - res->start + 1)); |
| iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; |
| if (res->flags & IORESOURCE_PREFETCH) |
| iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI; |
| else |
| iwcr0 |= MPC52xx_PCI_IWCR_READ; |
| } |
| |
| res = &hose->mem_resources[1]; |
| if (res->flags) { |
| pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n", |
| res->start, res->end, res->flags); |
| out_be32(&pci_regs->iw1btar, |
| MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, |
| res->end - res->start + 1)); |
| iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; |
| if (res->flags & IORESOURCE_PREFETCH) |
| iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI; |
| else |
| iwcr1 |= MPC52xx_PCI_IWCR_READ; |
| } |
| |
| /* IO resources */ |
| res = &hose->io_resource; |
| if (!res) { |
| printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__); |
| return; |
| } |
| pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} " |
| ".io_base_phys=0x%p\n", |
| res->start, res->end, res->flags, (void*)hose->io_base_phys); |
| out_be32(&pci_regs->iw2btar, |
| MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys, |
| res->start, |
| res->end - res->start + 1)); |
| iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO; |
| |
| /* Set all the IWCR fields at once; they're in the same reg */ |
| out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); |
| |
| out_be32(&pci_regs->tbatr0, |
| MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); |
| out_be32(&pci_regs->tbatr1, |
| MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); |
| |
| out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD); |
| |
| tmp = in_be32(&pci_regs->gscr); |
| #if 0 |
| /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */ |
| /* Not necessary and can be a bad thing if for example the bootloader |
| is displaying a splash screen or ... Just left here for |
| documentation purpose if anyone need it */ |
| out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR); |
| udelay(50); |
| #endif |
| |
| /* Make sure the PCI bridge is out of reset */ |
| out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR); |
| } |
| |
| static void |
| mpc52xx_pci_fixup_resources(struct pci_dev *dev) |
| { |
| int i; |
| |
| pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n", |
| dev->vendor, dev->device); |
| |
| /* We don't rely on boot loader for PCI and resets all |
| devices */ |
| for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { |
| struct resource *res = &dev->resource[i]; |
| if (res->end > res->start) { /* Only valid resources */ |
| res->end -= res->start; |
| res->start = 0; |
| res->flags |= IORESOURCE_UNSET; |
| } |
| } |
| |
| /* The PCI Host bridge of MPC52xx has a prefetch memory resource |
| fixed to 1Gb. Doesn't fit in the resource system so we remove it */ |
| if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && |
| ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 |
| || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { |
| struct resource *res = &dev->resource[1]; |
| res->start = res->end = res->flags = 0; |
| } |
| } |
| |
| int __init |
| mpc52xx_add_bridge(struct device_node *node) |
| { |
| int len; |
| struct mpc52xx_pci __iomem *pci_regs; |
| struct pci_controller *hose; |
| const int *bus_range; |
| struct resource rsrc; |
| |
| pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name); |
| |
| pci_assign_all_buses = 1; |
| |
| if (of_address_to_resource(node, 0, &rsrc) != 0) { |
| printk(KERN_ERR "Can't get %s resources\n", node->full_name); |
| return -EINVAL; |
| } |
| |
| bus_range = of_get_property(node, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n", |
| node->full_name); |
| bus_range = NULL; |
| } |
| |
| /* There are some PCI quirks on the 52xx, register the hook to |
| * fix them. */ |
| ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources; |
| |
| /* Alloc and initialize the pci controller. Values in the device |
| * tree are needed to configure the 52xx PCI controller. Rather |
| * than parse the tree here, let pci_process_bridge_OF_ranges() |
| * do it for us and extract the values after the fact */ |
| hose = pcibios_alloc_controller(); |
| if (!hose) |
| return -ENOMEM; |
| |
| hose->arch_data = node; |
| hose->set_cfg_type = 1; |
| |
| hose->first_busno = bus_range ? bus_range[0] : 0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| |
| hose->bus_offset = 0; |
| hose->ops = &mpc52xx_pci_ops; |
| |
| pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); |
| if (!pci_regs) |
| return -ENOMEM; |
| |
| pci_process_bridge_OF_ranges(hose, node, 1); |
| |
| /* Finish setting up PCI using values obtained by |
| * pci_proces_bridge_OF_ranges */ |
| mpc52xx_pci_setup(hose, pci_regs); |
| |
| return 0; |
| } |