| #ifndef _ASM_X86_APIC_H |
| #define _ASM_X86_APIC_H |
| |
| #include <linux/cpumask.h> |
| #include <linux/pm.h> |
| |
| #include <asm/alternative.h> |
| #include <asm/cpufeature.h> |
| #include <asm/processor.h> |
| #include <asm/apicdef.h> |
| #include <linux/atomic.h> |
| #include <asm/fixmap.h> |
| #include <asm/mpspec.h> |
| #include <asm/system.h> |
| #include <asm/msr.h> |
| |
| #define ARCH_APICTIMER_STOPS_ON_C3 1 |
| |
| /* |
| * Debugging macros |
| */ |
| #define APIC_QUIET 0 |
| #define APIC_VERBOSE 1 |
| #define APIC_DEBUG 2 |
| |
| /* |
| * Define the default level of output to be very little |
| * This can be turned up by using apic=verbose for more |
| * information and apic=debug for _lots_ of information. |
| * apic_verbosity is defined in apic.c |
| */ |
| #define apic_printk(v, s, a...) do { \ |
| if ((v) <= apic_verbosity) \ |
| printk(s, ##a); \ |
| } while (0) |
| |
| |
| #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) |
| extern void generic_apic_probe(void); |
| #else |
| static inline void generic_apic_probe(void) |
| { |
| } |
| #endif |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| |
| extern unsigned int apic_verbosity; |
| extern int local_apic_timer_c2_ok; |
| |
| extern int disable_apic; |
| extern unsigned int lapic_timer_frequency; |
| |
| #ifdef CONFIG_SMP |
| extern void __inquire_remote_apic(int apicid); |
| #else /* CONFIG_SMP */ |
| static inline void __inquire_remote_apic(int apicid) |
| { |
| } |
| #endif /* CONFIG_SMP */ |
| |
| static inline void default_inquire_remote_apic(int apicid) |
| { |
| if (apic_verbosity >= APIC_DEBUG) |
| __inquire_remote_apic(apicid); |
| } |
| |
| /* |
| * With 82489DX we can't rely on apic feature bit |
| * retrieved via cpuid but still have to deal with |
| * such an apic chip so we assume that SMP configuration |
| * is found from MP table (64bit case uses ACPI mostly |
| * which set smp presence flag as well so we are safe |
| * to use this helper too). |
| */ |
| static inline bool apic_from_smp_config(void) |
| { |
| return smp_found_config && !disable_apic; |
| } |
| |
| /* |
| * Basic functions accessing APICs. |
| */ |
| #ifdef CONFIG_PARAVIRT |
| #include <asm/paravirt.h> |
| #endif |
| |
| #ifdef CONFIG_X86_64 |
| extern int is_vsmp_box(void); |
| #else |
| static inline int is_vsmp_box(void) |
| { |
| return 0; |
| } |
| #endif |
| extern void xapic_wait_icr_idle(void); |
| extern u32 safe_xapic_wait_icr_idle(void); |
| extern void xapic_icr_write(u32, u32); |
| extern int setup_profiling_timer(unsigned int); |
| |
| static inline void native_apic_mem_write(u32 reg, u32 v) |
| { |
| volatile u32 *addr = (volatile u32 *)(APIC_BASE + reg); |
| |
| alternative_io("movl %0, %1", "xchgl %0, %1", X86_FEATURE_11AP, |
| ASM_OUTPUT2("=r" (v), "=m" (*addr)), |
| ASM_OUTPUT2("0" (v), "m" (*addr))); |
| } |
| |
| static inline u32 native_apic_mem_read(u32 reg) |
| { |
| return *((volatile u32 *)(APIC_BASE + reg)); |
| } |
| |
| extern void native_apic_wait_icr_idle(void); |
| extern u32 native_safe_apic_wait_icr_idle(void); |
| extern void native_apic_icr_write(u32 low, u32 id); |
| extern u64 native_apic_icr_read(void); |
| |
| extern int x2apic_mode; |
| |
| #ifdef CONFIG_X86_X2APIC |
| /* |
| * Make previous memory operations globally visible before |
| * sending the IPI through x2apic wrmsr. We need a serializing instruction or |
| * mfence for this. |
| */ |
| static inline void x2apic_wrmsr_fence(void) |
| { |
| asm volatile("mfence" : : : "memory"); |
| } |
| |
| static inline void native_apic_msr_write(u32 reg, u32 v) |
| { |
| if (reg == APIC_DFR || reg == APIC_ID || reg == APIC_LDR || |
| reg == APIC_LVR) |
| return; |
| |
| wrmsr(APIC_BASE_MSR + (reg >> 4), v, 0); |
| } |
| |
| static inline u32 native_apic_msr_read(u32 reg) |
| { |
| u64 msr; |
| |
| if (reg == APIC_DFR) |
| return -1; |
| |
| rdmsrl(APIC_BASE_MSR + (reg >> 4), msr); |
| return (u32)msr; |
| } |
| |
| static inline void native_x2apic_wait_icr_idle(void) |
| { |
| /* no need to wait for icr idle in x2apic */ |
| return; |
| } |
| |
| static inline u32 native_safe_x2apic_wait_icr_idle(void) |
| { |
| /* no need to wait for icr idle in x2apic */ |
| return 0; |
| } |
| |
| static inline void native_x2apic_icr_write(u32 low, u32 id) |
| { |
| wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); |
| } |
| |
| static inline u64 native_x2apic_icr_read(void) |
| { |
| unsigned long val; |
| |
| rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); |
| return val; |
| } |
| |
| extern int x2apic_phys; |
| extern void check_x2apic(void); |
| extern void enable_x2apic(void); |
| extern void x2apic_icr_write(u32 low, u32 id); |
| static inline int x2apic_enabled(void) |
| { |
| u64 msr; |
| |
| if (!cpu_has_x2apic) |
| return 0; |
| |
| rdmsrl(MSR_IA32_APICBASE, msr); |
| if (msr & X2APIC_ENABLE) |
| return 1; |
| return 0; |
| } |
| |
| #define x2apic_supported() (cpu_has_x2apic) |
| static inline void x2apic_force_phys(void) |
| { |
| x2apic_phys = 1; |
| } |
| #else |
| static inline void check_x2apic(void) |
| { |
| } |
| static inline void enable_x2apic(void) |
| { |
| } |
| static inline int x2apic_enabled(void) |
| { |
| return 0; |
| } |
| static inline void x2apic_force_phys(void) |
| { |
| } |
| |
| #define x2apic_preenabled 0 |
| #define x2apic_supported() 0 |
| #endif |
| |
| extern void enable_IR_x2apic(void); |
| |
| extern int get_physical_broadcast(void); |
| |
| extern int lapic_get_maxlvt(void); |
| extern void clear_local_APIC(void); |
| extern void connect_bsp_APIC(void); |
| extern void disconnect_bsp_APIC(int virt_wire_setup); |
| extern void disable_local_APIC(void); |
| extern void lapic_shutdown(void); |
| extern int verify_local_APIC(void); |
| extern void sync_Arb_IDs(void); |
| extern void init_bsp_APIC(void); |
| extern void setup_local_APIC(void); |
| extern void end_local_APIC_setup(void); |
| extern void bsp_end_local_APIC_setup(void); |
| extern void init_apic_mappings(void); |
| void register_lapic_address(unsigned long address); |
| extern void setup_boot_APIC_clock(void); |
| extern void setup_secondary_APIC_clock(void); |
| extern int APIC_init_uniprocessor(void); |
| extern int apic_force_enable(unsigned long addr); |
| |
| /* |
| * On 32bit this is mach-xxx local |
| */ |
| #ifdef CONFIG_X86_64 |
| extern int apic_is_clustered_box(void); |
| #else |
| static inline int apic_is_clustered_box(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| extern int setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask); |
| |
| #else /* !CONFIG_X86_LOCAL_APIC */ |
| static inline void lapic_shutdown(void) { } |
| #define local_apic_timer_c2_ok 1 |
| static inline void init_apic_mappings(void) { } |
| static inline void disable_local_APIC(void) { } |
| # define setup_boot_APIC_clock x86_init_noop |
| # define setup_secondary_APIC_clock x86_init_noop |
| #endif /* !CONFIG_X86_LOCAL_APIC */ |
| |
| #ifdef CONFIG_X86_64 |
| #define SET_APIC_ID(x) (apic->set_apic_id(x)) |
| #else |
| |
| #endif |
| |
| /* |
| * Copyright 2004 James Cleverdon, IBM. |
| * Subject to the GNU Public License, v.2 |
| * |
| * Generic APIC sub-arch data struct. |
| * |
| * Hacked for x86-64 by James Cleverdon from i386 architecture code by |
| * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and |
| * James Cleverdon. |
| */ |
| struct apic { |
| char *name; |
| |
| int (*probe)(void); |
| int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); |
| int (*apic_id_registered)(void); |
| |
| u32 irq_delivery_mode; |
| u32 irq_dest_mode; |
| |
| const struct cpumask *(*target_cpus)(void); |
| |
| int disable_esr; |
| |
| int dest_logical; |
| unsigned long (*check_apicid_used)(physid_mask_t *map, int apicid); |
| unsigned long (*check_apicid_present)(int apicid); |
| |
| void (*vector_allocation_domain)(int cpu, struct cpumask *retmask); |
| void (*init_apic_ldr)(void); |
| |
| void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap); |
| |
| void (*setup_apic_routing)(void); |
| int (*multi_timer_check)(int apic, int irq); |
| int (*cpu_present_to_apicid)(int mps_cpu); |
| void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap); |
| void (*setup_portio_remap)(void); |
| int (*check_phys_apicid_present)(int phys_apicid); |
| void (*enable_apic_mode)(void); |
| int (*phys_pkg_id)(int cpuid_apic, int index_msb); |
| |
| /* |
| * When one of the next two hooks returns 1 the apic |
| * is switched to this. Essentially they are additional |
| * probe functions: |
| */ |
| int (*mps_oem_check)(struct mpc_table *mpc, char *oem, char *productid); |
| |
| unsigned int (*get_apic_id)(unsigned long x); |
| unsigned long (*set_apic_id)(unsigned int id); |
| unsigned long apic_id_mask; |
| |
| unsigned int (*cpu_mask_to_apicid)(const struct cpumask *cpumask); |
| unsigned int (*cpu_mask_to_apicid_and)(const struct cpumask *cpumask, |
| const struct cpumask *andmask); |
| |
| /* ipi */ |
| void (*send_IPI_mask)(const struct cpumask *mask, int vector); |
| void (*send_IPI_mask_allbutself)(const struct cpumask *mask, |
| int vector); |
| void (*send_IPI_allbutself)(int vector); |
| void (*send_IPI_all)(int vector); |
| void (*send_IPI_self)(int vector); |
| |
| /* wakeup_secondary_cpu */ |
| int (*wakeup_secondary_cpu)(int apicid, unsigned long start_eip); |
| |
| int trampoline_phys_low; |
| int trampoline_phys_high; |
| |
| void (*wait_for_init_deassert)(atomic_t *deassert); |
| void (*smp_callin_clear_local_apic)(void); |
| void (*inquire_remote_apic)(int apicid); |
| |
| /* apic ops */ |
| u32 (*read)(u32 reg); |
| void (*write)(u32 reg, u32 v); |
| u64 (*icr_read)(void); |
| void (*icr_write)(u32 low, u32 high); |
| void (*wait_icr_idle)(void); |
| u32 (*safe_wait_icr_idle)(void); |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * Called very early during boot from get_smp_config(). It should |
| * return the logical apicid. x86_[bios]_cpu_to_apicid is |
| * initialized before this function is called. |
| * |
| * If logical apicid can't be determined that early, the function |
| * may return BAD_APICID. Logical apicid will be configured after |
| * init_apic_ldr() while bringing up CPUs. Note that NUMA affinity |
| * won't be applied properly during early boot in this case. |
| */ |
| int (*x86_32_early_logical_apicid)(int cpu); |
| |
| /* |
| * Optional method called from setup_local_APIC() after logical |
| * apicid is guaranteed to be known to initialize apicid -> node |
| * mapping if NUMA initialization hasn't done so already. Don't |
| * add new users. |
| */ |
| int (*x86_32_numa_cpu_node)(int cpu); |
| #endif |
| }; |
| |
| /* |
| * Pointer to the local APIC driver in use on this system (there's |
| * always just one such driver in use - the kernel decides via an |
| * early probing process which one it picks - and then sticks to it): |
| */ |
| extern struct apic *apic; |
| |
| /* |
| * APIC drivers are probed based on how they are listed in the .apicdrivers |
| * section. So the order is important and enforced by the ordering |
| * of different apic driver files in the Makefile. |
| * |
| * For the files having two apic drivers, we use apic_drivers() |
| * to enforce the order with in them. |
| */ |
| #define apic_driver(sym) \ |
| static struct apic *__apicdrivers_##sym __used \ |
| __aligned(sizeof(struct apic *)) \ |
| __section(.apicdrivers) = { &sym } |
| |
| #define apic_drivers(sym1, sym2) \ |
| static struct apic *__apicdrivers_##sym1##sym2[2] __used \ |
| __aligned(sizeof(struct apic *)) \ |
| __section(.apicdrivers) = { &sym1, &sym2 } |
| |
| extern struct apic *__apicdrivers[], *__apicdrivers_end[]; |
| |
| /* |
| * APIC functionality to boot other CPUs - only used on SMP: |
| */ |
| #ifdef CONFIG_SMP |
| extern atomic_t init_deasserted; |
| extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip); |
| #endif |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| static inline u32 apic_read(u32 reg) |
| { |
| return apic->read(reg); |
| } |
| |
| static inline void apic_write(u32 reg, u32 val) |
| { |
| apic->write(reg, val); |
| } |
| |
| static inline u64 apic_icr_read(void) |
| { |
| return apic->icr_read(); |
| } |
| |
| static inline void apic_icr_write(u32 low, u32 high) |
| { |
| apic->icr_write(low, high); |
| } |
| |
| static inline void apic_wait_icr_idle(void) |
| { |
| apic->wait_icr_idle(); |
| } |
| |
| static inline u32 safe_apic_wait_icr_idle(void) |
| { |
| return apic->safe_wait_icr_idle(); |
| } |
| |
| #else /* CONFIG_X86_LOCAL_APIC */ |
| |
| static inline u32 apic_read(u32 reg) { return 0; } |
| static inline void apic_write(u32 reg, u32 val) { } |
| static inline u64 apic_icr_read(void) { return 0; } |
| static inline void apic_icr_write(u32 low, u32 high) { } |
| static inline void apic_wait_icr_idle(void) { } |
| static inline u32 safe_apic_wait_icr_idle(void) { return 0; } |
| |
| #endif /* CONFIG_X86_LOCAL_APIC */ |
| |
| static inline void ack_APIC_irq(void) |
| { |
| /* |
| * ack_APIC_irq() actually gets compiled as a single instruction |
| * ... yummie. |
| */ |
| |
| /* Docs say use 0 for future compatibility */ |
| apic_write(APIC_EOI, 0); |
| } |
| |
| static inline unsigned default_get_apic_id(unsigned long x) |
| { |
| unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); |
| |
| if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID)) |
| return (x >> 24) & 0xFF; |
| else |
| return (x >> 24) & 0x0F; |
| } |
| |
| /* |
| * Warm reset vector default position: |
| */ |
| #define DEFAULT_TRAMPOLINE_PHYS_LOW 0x467 |
| #define DEFAULT_TRAMPOLINE_PHYS_HIGH 0x469 |
| |
| #ifdef CONFIG_X86_64 |
| extern int default_acpi_madt_oem_check(char *, char *); |
| |
| extern void apic_send_IPI_self(int vector); |
| |
| DECLARE_PER_CPU(int, x2apic_extra_bits); |
| |
| extern int default_cpu_present_to_apicid(int mps_cpu); |
| extern int default_check_phys_apicid_present(int phys_apicid); |
| #endif |
| |
| static inline void default_wait_for_init_deassert(atomic_t *deassert) |
| { |
| while (!atomic_read(deassert)) |
| cpu_relax(); |
| return; |
| } |
| |
| extern void generic_bigsmp_probe(void); |
| |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| |
| #include <asm/smp.h> |
| |
| #define APIC_DFR_VALUE (APIC_DFR_FLAT) |
| |
| static inline const struct cpumask *default_target_cpus(void) |
| { |
| #ifdef CONFIG_SMP |
| return cpu_online_mask; |
| #else |
| return cpumask_of(0); |
| #endif |
| } |
| |
| DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); |
| |
| |
| static inline unsigned int read_apic_id(void) |
| { |
| unsigned int reg; |
| |
| reg = apic_read(APIC_ID); |
| |
| return apic->get_apic_id(reg); |
| } |
| |
| extern void default_setup_apic_routing(void); |
| |
| extern struct apic apic_noop; |
| |
| #ifdef CONFIG_X86_32 |
| |
| static inline int noop_x86_32_early_logical_apicid(int cpu) |
| { |
| return BAD_APICID; |
| } |
| |
| /* |
| * Set up the logical destination ID. |
| * |
| * Intel recommends to set DFR, LDR and TPR before enabling |
| * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel |
| * document number 292116). So here it goes... |
| */ |
| extern void default_init_apic_ldr(void); |
| |
| static inline int default_apic_id_registered(void) |
| { |
| return physid_isset(read_apic_id(), phys_cpu_present_map); |
| } |
| |
| static inline int default_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return cpuid_apic >> index_msb; |
| } |
| |
| #endif |
| |
| static inline unsigned int |
| default_cpu_mask_to_apicid(const struct cpumask *cpumask) |
| { |
| return cpumask_bits(cpumask)[0] & APIC_ALL_CPUS; |
| } |
| |
| static inline unsigned int |
| default_cpu_mask_to_apicid_and(const struct cpumask *cpumask, |
| const struct cpumask *andmask) |
| { |
| unsigned long mask1 = cpumask_bits(cpumask)[0]; |
| unsigned long mask2 = cpumask_bits(andmask)[0]; |
| unsigned long mask3 = cpumask_bits(cpu_online_mask)[0]; |
| |
| return (unsigned int)(mask1 & mask2 & mask3); |
| } |
| |
| static inline unsigned long default_check_apicid_used(physid_mask_t *map, int apicid) |
| { |
| return physid_isset(apicid, *map); |
| } |
| |
| static inline unsigned long default_check_apicid_present(int bit) |
| { |
| return physid_isset(bit, phys_cpu_present_map); |
| } |
| |
| static inline void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap) |
| { |
| *retmap = *phys_map; |
| } |
| |
| static inline int __default_cpu_present_to_apicid(int mps_cpu) |
| { |
| if (mps_cpu < nr_cpu_ids && cpu_present(mps_cpu)) |
| return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); |
| else |
| return BAD_APICID; |
| } |
| |
| static inline int |
| __default_check_phys_apicid_present(int phys_apicid) |
| { |
| return physid_isset(phys_apicid, phys_cpu_present_map); |
| } |
| |
| #ifdef CONFIG_X86_32 |
| static inline int default_cpu_present_to_apicid(int mps_cpu) |
| { |
| return __default_cpu_present_to_apicid(mps_cpu); |
| } |
| |
| static inline int |
| default_check_phys_apicid_present(int phys_apicid) |
| { |
| return __default_check_phys_apicid_present(phys_apicid); |
| } |
| #else |
| extern int default_cpu_present_to_apicid(int mps_cpu); |
| extern int default_check_phys_apicid_present(int phys_apicid); |
| #endif |
| |
| #endif /* CONFIG_X86_LOCAL_APIC */ |
| |
| #endif /* _ASM_X86_APIC_H */ |