| /* |
| * Macintosh Nubus Interface Code |
| * |
| * Originally by Alan Cox |
| * |
| * Mostly rewritten by David Huggins-Daines, C. Scott Ananian, |
| * and others. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/nubus.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <asm/setup.h> |
| #include <asm/system.h> |
| #include <asm/page.h> |
| #include <asm/hwtest.h> |
| #include <linux/proc_fs.h> |
| #include <asm/mac_via.h> |
| #include <asm/mac_oss.h> |
| |
| extern void via_nubus_init(void); |
| extern void oss_nubus_init(void); |
| |
| /* Constants */ |
| |
| /* This is, of course, the size in bytelanes, rather than the size in |
| actual bytes */ |
| #define FORMAT_BLOCK_SIZE 20 |
| #define ROM_DIR_OFFSET 0x24 |
| |
| #define NUBUS_TEST_PATTERN 0x5A932BC7 |
| |
| /* Define this if you like to live dangerously - it is known not to |
| work on pretty much every machine except the Quadra 630 and the LC |
| III. */ |
| #undef I_WANT_TO_PROBE_SLOT_ZERO |
| |
| /* This sometimes helps combat failure to boot */ |
| #undef TRY_TO_DODGE_WSOD |
| |
| /* Globals */ |
| |
| struct nubus_dev* nubus_devices; |
| struct nubus_board* nubus_boards; |
| |
| /* Meaning of "bytelanes": |
| |
| The card ROM may appear on any or all bytes of each long word in |
| NuBus memory. The low 4 bits of the "map" value found in the |
| format block (at the top of the slot address space, as well as at |
| the top of the MacOS ROM) tells us which bytelanes, i.e. which byte |
| offsets within each longword, are valid. Thus: |
| |
| A map of 0x0f, as found in the MacOS ROM, means that all bytelanes |
| are valid. |
| |
| A map of 0xf0 means that no bytelanes are valid (We pray that we |
| will never encounter this, but stranger things have happened) |
| |
| A map of 0xe1 means that only the MSB of each long word is actually |
| part of the card ROM. (We hope to never encounter NuBus on a |
| little-endian machine. Again, stranger things have happened) |
| |
| A map of 0x78 means that only the LSB of each long word is valid. |
| |
| Etcetera, etcetera. Hopefully this clears up some confusion over |
| what the following code actually does. */ |
| |
| static inline int not_useful(void *p, int map) |
| { |
| unsigned long pv=(unsigned long)p; |
| pv &= 3; |
| if(map & (1<<pv)) |
| return 0; |
| return 1; |
| } |
| |
| static unsigned long nubus_get_rom(unsigned char **ptr, int len, int map) |
| { |
| /* This will hold the result */ |
| unsigned long v = 0; |
| unsigned char *p = *ptr; |
| |
| while(len) |
| { |
| v <<= 8; |
| while(not_useful(p,map)) |
| p++; |
| v |= *p++; |
| len--; |
| } |
| *ptr = p; |
| return v; |
| } |
| |
| static void nubus_rewind(unsigned char **ptr, int len, int map) |
| { |
| unsigned char *p=*ptr; |
| |
| /* Sanity check */ |
| if(len > 65536) |
| printk(KERN_ERR "rewind of 0x%08x!\n", len); |
| while(len) |
| { |
| do |
| { |
| p--; |
| } |
| while(not_useful(p, map)); |
| len--; |
| } |
| *ptr=p; |
| } |
| |
| static void nubus_advance(unsigned char **ptr, int len, int map) |
| { |
| unsigned char *p = *ptr; |
| if(len>65536) |
| printk(KERN_ERR "advance of 0x%08x!\n", len); |
| while(len) |
| { |
| while(not_useful(p,map)) |
| p++; |
| p++; |
| len--; |
| } |
| *ptr = p; |
| } |
| |
| static void nubus_move(unsigned char **ptr, int len, int map) |
| { |
| if(len > 0) |
| nubus_advance(ptr, len, map); |
| else if(len < 0) |
| nubus_rewind(ptr, -len, map); |
| } |
| |
| /* Now, functions to read the sResource tree */ |
| |
| /* Each sResource entry consists of a 1-byte ID and a 3-byte data |
| field. If that data field contains an offset, then obviously we |
| have to expand it from a 24-bit signed number to a 32-bit signed |
| number. */ |
| |
| static inline long nubus_expand32(long foo) |
| { |
| if(foo & 0x00800000) /* 24bit negative */ |
| foo |= 0xFF000000; |
| return foo; |
| } |
| |
| static inline void *nubus_rom_addr(int slot) |
| { |
| /* |
| * Returns the first byte after the card. We then walk |
| * backwards to get the lane register and the config |
| */ |
| return (void *)(0xF1000000+(slot<<24)); |
| } |
| |
| static unsigned char *nubus_dirptr(const struct nubus_dirent *nd) |
| { |
| unsigned char *p = nd->base; |
| /* Essentially, just step over the bytelanes using whatever |
| offset we might have found */ |
| nubus_move(&p, nubus_expand32(nd->data), nd->mask); |
| /* And return the value */ |
| return p; |
| } |
| |
| /* These two are for pulling resource data blocks (i.e. stuff that's |
| pointed to with offsets) out of the card ROM. */ |
| |
| void nubus_get_rsrc_mem(void *dest, const struct nubus_dirent* dirent, |
| int len) |
| { |
| unsigned char *t = (unsigned char *)dest; |
| unsigned char *p = nubus_dirptr(dirent); |
| while(len) |
| { |
| *t++ = nubus_get_rom(&p, 1, dirent->mask); |
| len--; |
| } |
| } |
| |
| void nubus_get_rsrc_str(void *dest, const struct nubus_dirent* dirent, |
| int len) |
| { |
| unsigned char *t=(unsigned char *)dest; |
| unsigned char *p = nubus_dirptr(dirent); |
| while(len) |
| { |
| *t = nubus_get_rom(&p, 1, dirent->mask); |
| if(!*t++) |
| break; |
| len--; |
| } |
| } |
| |
| int nubus_get_root_dir(const struct nubus_board* board, |
| struct nubus_dir* dir) |
| { |
| dir->ptr = dir->base = board->directory; |
| dir->done = 0; |
| dir->mask = board->lanes; |
| return 0; |
| } |
| |
| /* This is a slyly renamed version of the above */ |
| int nubus_get_func_dir(const struct nubus_dev* dev, |
| struct nubus_dir* dir) |
| { |
| dir->ptr = dir->base = dev->directory; |
| dir->done = 0; |
| dir->mask = dev->board->lanes; |
| return 0; |
| } |
| |
| int nubus_get_board_dir(const struct nubus_board* board, |
| struct nubus_dir* dir) |
| { |
| struct nubus_dirent ent; |
| |
| dir->ptr = dir->base = board->directory; |
| dir->done = 0; |
| dir->mask = board->lanes; |
| |
| /* Now dereference it (the first directory is always the board |
| directory) */ |
| if (nubus_readdir(dir, &ent) == -1) |
| return -1; |
| if (nubus_get_subdir(&ent, dir) == -1) |
| return -1; |
| return 0; |
| } |
| |
| int nubus_get_subdir(const struct nubus_dirent *ent, |
| struct nubus_dir *dir) |
| { |
| dir->ptr = dir->base = nubus_dirptr(ent); |
| dir->done = 0; |
| dir->mask = ent->mask; |
| return 0; |
| } |
| |
| int nubus_readdir(struct nubus_dir *nd, struct nubus_dirent *ent) |
| { |
| u32 resid; |
| if (nd->done) |
| return -1; |
| |
| /* Do this first, otherwise nubus_rewind & co are off by 4 */ |
| ent->base = nd->ptr; |
| |
| /* This moves nd->ptr forward */ |
| resid = nubus_get_rom(&nd->ptr, 4, nd->mask); |
| |
| /* EOL marker, as per the Apple docs */ |
| if((resid&0xff000000) == 0xff000000) |
| { |
| /* Mark it as done */ |
| nd->done = 1; |
| return -1; |
| } |
| |
| /* First byte is the resource ID */ |
| ent->type = resid >> 24; |
| /* Low 3 bytes might contain data (or might not) */ |
| ent->data = resid & 0xffffff; |
| ent->mask = nd->mask; |
| return 0; |
| } |
| |
| int nubus_rewinddir(struct nubus_dir* dir) |
| { |
| dir->ptr = dir->base; |
| return 0; |
| } |
| |
| /* Driver interface functions, more or less like in pci.c */ |
| |
| struct nubus_dev* |
| nubus_find_device(unsigned short category, |
| unsigned short type, |
| unsigned short dr_hw, |
| unsigned short dr_sw, |
| const struct nubus_dev* from) |
| { |
| struct nubus_dev* itor = |
| from ? from->next : nubus_devices; |
| |
| while (itor) { |
| if (itor->category == category |
| && itor->type == type |
| && itor->dr_hw == dr_hw |
| && itor->dr_sw == dr_sw) |
| return itor; |
| itor = itor->next; |
| } |
| return NULL; |
| } |
| |
| struct nubus_dev* |
| nubus_find_type(unsigned short category, |
| unsigned short type, |
| const struct nubus_dev* from) |
| { |
| struct nubus_dev* itor = |
| from ? from->next : nubus_devices; |
| |
| while (itor) { |
| if (itor->category == category |
| && itor->type == type) |
| return itor; |
| itor = itor->next; |
| } |
| return NULL; |
| } |
| |
| struct nubus_dev* |
| nubus_find_slot(unsigned int slot, |
| const struct nubus_dev* from) |
| { |
| struct nubus_dev* itor = |
| from ? from->next : nubus_devices; |
| |
| while (itor) { |
| if (itor->board->slot == slot) |
| return itor; |
| itor = itor->next; |
| } |
| return NULL; |
| } |
| |
| int |
| nubus_find_rsrc(struct nubus_dir* dir, unsigned char rsrc_type, |
| struct nubus_dirent* ent) |
| { |
| while (nubus_readdir(dir, ent) != -1) { |
| if (ent->type == rsrc_type) |
| return 0; |
| } |
| return -1; |
| } |
| |
| /* Initialization functions - decide which slots contain stuff worth |
| looking at, and print out lots and lots of information from the |
| resource blocks. */ |
| |
| /* FIXME: A lot of this stuff will eventually be useful after |
| initialization, for intelligently probing Ethernet and video chips, |
| among other things. The rest of it should go in the /proc code. |
| For now, we just use it to give verbose boot logs. */ |
| |
| static int __init nubus_show_display_resource(struct nubus_dev* dev, |
| const struct nubus_dirent* ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_GAMMADIR: |
| printk(KERN_INFO " gamma directory offset: 0x%06x\n", ent->data); |
| break; |
| case 0x0080 ... 0x0085: |
| printk(KERN_INFO " mode %02X info offset: 0x%06x\n", |
| ent->type, ent->data); |
| break; |
| default: |
| printk(KERN_INFO " unknown resource %02X, data 0x%06x\n", |
| ent->type, ent->data); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_show_network_resource(struct nubus_dev* dev, |
| const struct nubus_dirent* ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_MAC_ADDRESS: |
| { |
| char addr[6]; |
| int i; |
| |
| nubus_get_rsrc_mem(addr, ent, 6); |
| printk(KERN_INFO " MAC address: "); |
| for (i = 0; i < 6; i++) |
| printk("%02x%s", addr[i] & 0xff, |
| i == 5 ? "" : ":"); |
| printk("\n"); |
| break; |
| } |
| default: |
| printk(KERN_INFO " unknown resource %02X, data 0x%06x\n", |
| ent->type, ent->data); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_show_cpu_resource(struct nubus_dev* dev, |
| const struct nubus_dirent* ent) |
| { |
| switch (ent->type) { |
| case NUBUS_RESID_MEMINFO: |
| { |
| unsigned long meminfo[2]; |
| nubus_get_rsrc_mem(&meminfo, ent, 8); |
| printk(KERN_INFO " memory: [ 0x%08lx 0x%08lx ]\n", |
| meminfo[0], meminfo[1]); |
| break; |
| } |
| case NUBUS_RESID_ROMINFO: |
| { |
| unsigned long rominfo[2]; |
| nubus_get_rsrc_mem(&rominfo, ent, 8); |
| printk(KERN_INFO " ROM: [ 0x%08lx 0x%08lx ]\n", |
| rominfo[0], rominfo[1]); |
| break; |
| } |
| default: |
| printk(KERN_INFO " unknown resource %02X, data 0x%06x\n", |
| ent->type, ent->data); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_show_private_resource(struct nubus_dev* dev, |
| const struct nubus_dirent* ent) |
| { |
| switch (dev->category) { |
| case NUBUS_CAT_DISPLAY: |
| nubus_show_display_resource(dev, ent); |
| break; |
| case NUBUS_CAT_NETWORK: |
| nubus_show_network_resource(dev, ent); |
| break; |
| case NUBUS_CAT_CPU: |
| nubus_show_cpu_resource(dev, ent); |
| break; |
| default: |
| printk(KERN_INFO " unknown resource %02X, data 0x%06x\n", |
| ent->type, ent->data); |
| } |
| return 0; |
| } |
| |
| static struct nubus_dev* __init |
| nubus_get_functional_resource(struct nubus_board* board, |
| int slot, |
| const struct nubus_dirent* parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| struct nubus_dev* dev; |
| |
| printk(KERN_INFO " Function 0x%02x:\n", parent->type); |
| nubus_get_subdir(parent, &dir); |
| |
| /* Apple seems to have botched the ROM on the IIx */ |
| if (slot == 0 && (unsigned long)dir.base % 2) |
| dir.base += 1; |
| |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_functional_resource: parent is 0x%p, dir is 0x%p\n", |
| parent->base, dir.base); |
| |
| /* Actually we should probably panic if this fails */ |
| if ((dev = kzalloc(sizeof(*dev), GFP_ATOMIC)) == NULL) |
| return NULL; |
| dev->resid = parent->type; |
| dev->directory = dir.base; |
| dev->board = board; |
| |
| while (nubus_readdir(&dir, &ent) != -1) |
| { |
| switch(ent.type) |
| { |
| case NUBUS_RESID_TYPE: |
| { |
| unsigned short nbtdata[4]; |
| nubus_get_rsrc_mem(nbtdata, &ent, 8); |
| dev->category = nbtdata[0]; |
| dev->type = nbtdata[1]; |
| dev->dr_sw = nbtdata[2]; |
| dev->dr_hw = nbtdata[3]; |
| printk(KERN_INFO " type: [cat 0x%x type 0x%x hw 0x%x sw 0x%x]\n", |
| nbtdata[0], nbtdata[1], nbtdata[2], nbtdata[3]); |
| break; |
| } |
| case NUBUS_RESID_NAME: |
| { |
| nubus_get_rsrc_str(dev->name, &ent, 64); |
| printk(KERN_INFO " name: %s\n", dev->name); |
| break; |
| } |
| case NUBUS_RESID_DRVRDIR: |
| { |
| /* MacOS driver. If we were NetBSD we might |
| use this :-) */ |
| struct nubus_dir drvr_dir; |
| struct nubus_dirent drvr_ent; |
| nubus_get_subdir(&ent, &drvr_dir); |
| nubus_readdir(&drvr_dir, &drvr_ent); |
| dev->driver = nubus_dirptr(&drvr_ent); |
| printk(KERN_INFO " driver at: 0x%p\n", |
| dev->driver); |
| break; |
| } |
| case NUBUS_RESID_MINOR_BASEOS: |
| /* We will need this in order to support |
| multiple framebuffers. It might be handy |
| for Ethernet as well */ |
| nubus_get_rsrc_mem(&dev->iobase, &ent, 4); |
| printk(KERN_INFO " memory offset: 0x%08lx\n", |
| dev->iobase); |
| break; |
| case NUBUS_RESID_MINOR_LENGTH: |
| /* Ditto */ |
| nubus_get_rsrc_mem(&dev->iosize, &ent, 4); |
| printk(KERN_INFO " memory length: 0x%08lx\n", |
| dev->iosize); |
| break; |
| case NUBUS_RESID_FLAGS: |
| dev->flags = ent.data; |
| printk(KERN_INFO " flags: 0x%06x\n", dev->flags); |
| break; |
| case NUBUS_RESID_HWDEVID: |
| dev->hwdevid = ent.data; |
| printk(KERN_INFO " hwdevid: 0x%06x\n", dev->hwdevid); |
| break; |
| default: |
| /* Local/Private resources have their own |
| function */ |
| nubus_show_private_resource(dev, &ent); |
| } |
| } |
| |
| return dev; |
| } |
| |
| /* This is cool. */ |
| static int __init nubus_get_vidnames(struct nubus_board* board, |
| const struct nubus_dirent* parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| /* FIXME: obviously we want to put this in a header file soon */ |
| struct vidmode { |
| u32 size; |
| /* Don't know what this is yet */ |
| u16 id; |
| /* Longest one I've seen so far is 26 characters */ |
| char name[32]; |
| }; |
| |
| printk(KERN_INFO " video modes supported:\n"); |
| nubus_get_subdir(parent, &dir); |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_vidnames: parent is 0x%p, dir is 0x%p\n", |
| parent->base, dir.base); |
| |
| while(nubus_readdir(&dir, &ent) != -1) |
| { |
| struct vidmode mode; |
| u32 size; |
| |
| /* First get the length */ |
| nubus_get_rsrc_mem(&size, &ent, 4); |
| |
| /* Now clobber the whole thing */ |
| if (size > sizeof(mode) - 1) |
| size = sizeof(mode) - 1; |
| memset(&mode, 0, sizeof(mode)); |
| nubus_get_rsrc_mem(&mode, &ent, size); |
| printk (KERN_INFO " %02X: (%02X) %s\n", ent.type, |
| mode.id, mode.name); |
| } |
| return 0; |
| } |
| |
| /* This is *really* cool. */ |
| static int __init nubus_get_icon(struct nubus_board* board, |
| const struct nubus_dirent* ent) |
| { |
| /* Should be 32x32 if my memory serves me correctly */ |
| unsigned char icon[128]; |
| int x, y; |
| |
| nubus_get_rsrc_mem(&icon, ent, 128); |
| printk(KERN_INFO " icon:\n"); |
| |
| /* We should actually plot these somewhere in the framebuffer |
| init. This is just to demonstrate that they do, in fact, |
| exist */ |
| for (y = 0; y < 32; y++) { |
| printk(KERN_INFO " "); |
| for (x = 0; x < 32; x++) { |
| if (icon[y*4 + x/8] |
| & (0x80 >> (x%8))) |
| printk("*"); |
| else |
| printk(" "); |
| } |
| printk("\n"); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_vendorinfo(struct nubus_board* board, |
| const struct nubus_dirent* parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| static char* vendor_fields[6] = {"ID", "serial", "revision", |
| "part", "date", "unknown field"}; |
| |
| printk(KERN_INFO " vendor info:\n"); |
| nubus_get_subdir(parent, &dir); |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_vendorinfo: parent is 0x%p, dir is 0x%p\n", |
| parent->base, dir.base); |
| |
| while(nubus_readdir(&dir, &ent) != -1) |
| { |
| char name[64]; |
| |
| /* These are all strings, we think */ |
| nubus_get_rsrc_str(name, &ent, 64); |
| if (ent.type > 5) |
| ent.type = 5; |
| printk(KERN_INFO " %s: %s\n", |
| vendor_fields[ent.type-1], name); |
| } |
| return 0; |
| } |
| |
| static int __init nubus_get_board_resource(struct nubus_board* board, int slot, |
| const struct nubus_dirent* parent) |
| { |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| nubus_get_subdir(parent, &dir); |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_board_resource: parent is 0x%p, dir is 0x%p\n", |
| parent->base, dir.base); |
| |
| while(nubus_readdir(&dir, &ent) != -1) |
| { |
| switch (ent.type) { |
| case NUBUS_RESID_TYPE: |
| { |
| unsigned short nbtdata[4]; |
| /* This type is always the same, and is not |
| useful except insofar as it tells us that |
| we really are looking at a board resource. */ |
| nubus_get_rsrc_mem(nbtdata, &ent, 8); |
| printk(KERN_INFO " type: [cat 0x%x type 0x%x hw 0x%x sw 0x%x]\n", |
| nbtdata[0], nbtdata[1], nbtdata[2], |
| nbtdata[3]); |
| if (nbtdata[0] != 1 || nbtdata[1] != 0 || |
| nbtdata[2] != 0 || nbtdata[3] != 0) |
| printk(KERN_ERR "this sResource is not a board resource!\n"); |
| break; |
| } |
| case NUBUS_RESID_NAME: |
| nubus_get_rsrc_str(board->name, &ent, 64); |
| printk(KERN_INFO " name: %s\n", board->name); |
| break; |
| case NUBUS_RESID_ICON: |
| nubus_get_icon(board, &ent); |
| break; |
| case NUBUS_RESID_BOARDID: |
| printk(KERN_INFO " board id: 0x%x\n", ent.data); |
| break; |
| case NUBUS_RESID_PRIMARYINIT: |
| printk(KERN_INFO " primary init offset: 0x%06x\n", ent.data); |
| break; |
| case NUBUS_RESID_VENDORINFO: |
| nubus_get_vendorinfo(board, &ent); |
| break; |
| case NUBUS_RESID_FLAGS: |
| printk(KERN_INFO " flags: 0x%06x\n", ent.data); |
| break; |
| case NUBUS_RESID_HWDEVID: |
| printk(KERN_INFO " hwdevid: 0x%06x\n", ent.data); |
| break; |
| case NUBUS_RESID_SECONDINIT: |
| printk(KERN_INFO " secondary init offset: 0x%06x\n", ent.data); |
| break; |
| /* WTF isn't this in the functional resources? */ |
| case NUBUS_RESID_VIDNAMES: |
| nubus_get_vidnames(board, &ent); |
| break; |
| /* Same goes for this */ |
| case NUBUS_RESID_VIDMODES: |
| printk(KERN_INFO " video mode parameter directory offset: 0x%06x\n", |
| ent.data); |
| break; |
| default: |
| printk(KERN_INFO " unknown resource %02X, data 0x%06x\n", |
| ent.type, ent.data); |
| } |
| } |
| return 0; |
| } |
| |
| /* Attempt to bypass the somewhat non-obvious arrangement of |
| sResources in the motherboard ROM */ |
| static void __init nubus_find_rom_dir(struct nubus_board* board) |
| { |
| unsigned char* rp; |
| unsigned char* romdir; |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| /* Check for the extra directory just under the format block */ |
| rp = board->fblock; |
| nubus_rewind(&rp, 4, board->lanes); |
| if (nubus_get_rom(&rp, 4, board->lanes) != NUBUS_TEST_PATTERN) { |
| /* OK, the ROM was telling the truth */ |
| board->directory = board->fblock; |
| nubus_move(&board->directory, |
| nubus_expand32(board->doffset), |
| board->lanes); |
| return; |
| } |
| |
| /* On "slot zero", you have to walk down a few more |
| directories to get to the equivalent of a real card's root |
| directory. We don't know what they were smoking when they |
| came up with this. */ |
| romdir = nubus_rom_addr(board->slot); |
| nubus_rewind(&romdir, ROM_DIR_OFFSET, board->lanes); |
| dir.base = dir.ptr = romdir; |
| dir.done = 0; |
| dir.mask = board->lanes; |
| |
| /* This one points to an "Unknown Macintosh" directory */ |
| if (nubus_readdir(&dir, &ent) == -1) |
| goto badrom; |
| |
| if (console_loglevel >= 10) |
| printk(KERN_INFO "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); |
| /* This one takes us to where we want to go. */ |
| if (nubus_readdir(&dir, &ent) == -1) |
| goto badrom; |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); |
| nubus_get_subdir(&ent, &dir); |
| |
| /* Resource ID 01, also an "Unknown Macintosh" */ |
| if (nubus_readdir(&dir, &ent) == -1) |
| goto badrom; |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); |
| |
| /* FIXME: the first one is *not* always the right one. We |
| suspect this has something to do with the ROM revision. |
| "The HORROR ROM" (LC-series) uses 0x7e, while "The HORROR |
| Continues" (Q630) uses 0x7b. The DAFB Macs evidently use |
| something else. Please run "Slots" on your Mac (see |
| include/linux/nubus.h for where to get this program) and |
| tell us where the 'SiDirPtr' for Slot 0 is. If you feel |
| brave, you should also use MacsBug to walk down the ROM |
| directories like this function does and try to find the |
| path to that address... */ |
| if (nubus_readdir(&dir, &ent) == -1) |
| goto badrom; |
| if (console_loglevel >= 10) |
| printk(KERN_DEBUG "nubus_get_rom_dir: entry %02x %06x\n", ent.type, ent.data); |
| |
| /* Bwahahahaha... */ |
| nubus_get_subdir(&ent, &dir); |
| board->directory = dir.base; |
| return; |
| |
| /* Even more evil laughter... */ |
| badrom: |
| board->directory = board->fblock; |
| nubus_move(&board->directory, nubus_expand32(board->doffset), board->lanes); |
| printk(KERN_ERR "nubus_get_rom_dir: ROM weirdness! Notify the developers...\n"); |
| } |
| |
| /* Add a board (might be many devices) to the list */ |
| static struct nubus_board* __init nubus_add_board(int slot, int bytelanes) |
| { |
| struct nubus_board* board; |
| struct nubus_board** boardp; |
| |
| unsigned char *rp; |
| unsigned long dpat; |
| struct nubus_dir dir; |
| struct nubus_dirent ent; |
| |
| /* Move to the start of the format block */ |
| rp = nubus_rom_addr(slot); |
| nubus_rewind(&rp, FORMAT_BLOCK_SIZE, bytelanes); |
| |
| /* Actually we should probably panic if this fails */ |
| if ((board = kzalloc(sizeof(*board), GFP_ATOMIC)) == NULL) |
| return NULL; |
| board->fblock = rp; |
| |
| /* Dump the format block for debugging purposes */ |
| if (console_loglevel >= 10) { |
| int i; |
| printk(KERN_DEBUG "Slot %X, format block at 0x%p\n", |
| slot, rp); |
| printk(KERN_DEBUG "Format block: "); |
| for (i = 0; i < FORMAT_BLOCK_SIZE; i += 4) { |
| unsigned short foo, bar; |
| foo = nubus_get_rom(&rp, 2, bytelanes); |
| bar = nubus_get_rom(&rp, 2, bytelanes); |
| printk("%04x %04x ", foo, bar); |
| } |
| printk("\n"); |
| rp = board->fblock; |
| } |
| |
| board->slot = slot; |
| board->slot_addr = (unsigned long) nubus_slot_addr(slot); |
| board->doffset = nubus_get_rom(&rp, 4, bytelanes); |
| /* rom_length is *supposed* to be the total length of the |
| * ROM. In practice it is the "amount of ROM used to compute |
| * the CRC." So some jokers decide to set it to zero and |
| * set the crc to zero so they don't have to do any math. |
| * See the Performa 460 ROM, for example. Those Apple "engineers". |
| */ |
| board->rom_length = nubus_get_rom(&rp, 4, bytelanes); |
| board->crc = nubus_get_rom(&rp, 4, bytelanes); |
| board->rev = nubus_get_rom(&rp, 1, bytelanes); |
| board->format = nubus_get_rom(&rp,1, bytelanes); |
| board->lanes = bytelanes; |
| |
| /* Directory offset should be small and negative... */ |
| if(!(board->doffset & 0x00FF0000)) |
| printk(KERN_WARNING "Dodgy doffset!\n"); |
| dpat = nubus_get_rom(&rp, 4, bytelanes); |
| if(dpat != NUBUS_TEST_PATTERN) |
| printk(KERN_WARNING "Wrong test pattern %08lx!\n", dpat); |
| |
| /* |
| * I wonder how the CRC is meant to work - |
| * any takers ? |
| * CSA: According to MAC docs, not all cards pass the CRC anyway, |
| * since the initial Macintosh ROM releases skipped the check. |
| */ |
| |
| /* Attempt to work around slot zero weirdness */ |
| nubus_find_rom_dir(board); |
| nubus_get_root_dir(board, &dir); |
| |
| /* We're ready to rock */ |
| printk(KERN_INFO "Slot %X:\n", slot); |
| |
| /* Each slot should have one board resource and any number of |
| functional resources. So we'll fill in some fields in the |
| struct nubus_board from the board resource, then walk down |
| the list of functional resources, spinning out a nubus_dev |
| for each of them. */ |
| if (nubus_readdir(&dir, &ent) == -1) { |
| /* We can't have this! */ |
| printk(KERN_ERR "Board resource not found!\n"); |
| return NULL; |
| } else { |
| printk(KERN_INFO " Board resource:\n"); |
| nubus_get_board_resource(board, slot, &ent); |
| } |
| |
| /* Aaaarrrrgghh! The LC III motherboard has *two* board |
| resources. I have no idea WTF to do about this. */ |
| |
| while (nubus_readdir(&dir, &ent) != -1) { |
| struct nubus_dev* dev; |
| struct nubus_dev** devp; |
| dev = nubus_get_functional_resource(board, slot, &ent); |
| if (dev == NULL) |
| continue; |
| |
| /* We zeroed this out above */ |
| if (board->first_dev == NULL) |
| board->first_dev = dev; |
| |
| /* Put it on the global NuBus device chain. Keep entries in order. */ |
| for (devp=&nubus_devices; *devp!=NULL; devp=&((*devp)->next)) |
| /* spin */; |
| *devp = dev; |
| dev->next = NULL; |
| } |
| |
| /* Put it on the global NuBus board chain. Keep entries in order. */ |
| for (boardp=&nubus_boards; *boardp!=NULL; boardp=&((*boardp)->next)) |
| /* spin */; |
| *boardp = board; |
| board->next = NULL; |
| |
| return board; |
| } |
| |
| void __init nubus_probe_slot(int slot) |
| { |
| unsigned char dp; |
| unsigned char* rp; |
| int i; |
| |
| rp = nubus_rom_addr(slot); |
| for(i = 4; i; i--) |
| { |
| unsigned long flags; |
| int card_present; |
| |
| rp--; |
| local_irq_save(flags); |
| card_present = hwreg_present(rp); |
| local_irq_restore(flags); |
| |
| if (!card_present) |
| continue; |
| |
| printk(KERN_DEBUG "Now probing slot %X at %p\n", slot, rp); |
| dp = *rp; |
| if(dp == 0) |
| continue; |
| |
| /* The last byte of the format block consists of two |
| nybbles which are "mirror images" of each other. |
| These show us the valid bytelanes */ |
| if ((((dp>>4) ^ dp) & 0x0F) != 0x0F) |
| continue; |
| /* Check that this value is actually *on* one of the |
| bytelanes it claims are valid! */ |
| if ((dp & 0x0F) >= (1<<i)) |
| continue; |
| |
| /* Looks promising. Let's put it on the list. */ |
| nubus_add_board(slot, dp); |
| |
| return; |
| } |
| } |
| |
| #if defined(CONFIG_PROC_FS) |
| |
| /* /proc/nubus stuff */ |
| |
| static int sprint_nubus_board(struct nubus_board* board, char* ptr, int len) |
| { |
| if(len < 100) |
| return -1; |
| |
| sprintf(ptr, "Slot %X: %s\n", |
| board->slot, board->name); |
| |
| return strlen(ptr); |
| } |
| |
| static int nubus_read_proc(char *page, char **start, off_t off, |
| int count, int *eof, void *data) |
| { |
| int nprinted, len, begin = 0; |
| int size = PAGE_SIZE; |
| struct nubus_board* board; |
| |
| len = sprintf(page, "Nubus devices found:\n"); |
| /* Walk the list of NuBus boards */ |
| for (board = nubus_boards; board != NULL; board = board->next) |
| { |
| nprinted = sprint_nubus_board(board, page + len, size - len); |
| if (nprinted < 0) |
| break; |
| len += nprinted; |
| if (len+begin < off) { |
| begin += len; |
| len = 0; |
| } |
| if (len+begin >= off+count) |
| break; |
| } |
| if (len+begin < off) |
| *eof = 1; |
| off -= begin; |
| *start = page + off; |
| len -= off; |
| if (len>count) |
| len = count; |
| if (len<0) |
| len = 0; |
| return len; |
| } |
| #endif |
| |
| void __init nubus_scan_bus(void) |
| { |
| int slot; |
| /* This might not work on your machine */ |
| #ifdef I_WANT_TO_PROBE_SLOT_ZERO |
| nubus_probe_slot(0); |
| #endif |
| for(slot = 9; slot < 15; slot++) |
| { |
| nubus_probe_slot(slot); |
| } |
| } |
| |
| static int __init nubus_init(void) |
| { |
| if (!MACH_IS_MAC) |
| return 0; |
| |
| /* Initialize the NuBus interrupts */ |
| if (oss_present) { |
| oss_nubus_init(); |
| } else { |
| via_nubus_init(); |
| } |
| |
| #ifdef TRY_TO_DODGE_WSOD |
| /* Rogue Ethernet interrupts can kill the machine if we don't |
| do this. Obviously this is bogus. Hopefully the local VIA |
| gurus can fix the real cause of the problem. */ |
| mdelay(1000); |
| #endif |
| |
| /* And probe */ |
| printk("NuBus: Scanning NuBus slots.\n"); |
| nubus_devices = NULL; |
| nubus_boards = NULL; |
| nubus_scan_bus(); |
| |
| #ifdef CONFIG_PROC_FS |
| create_proc_read_entry("nubus", 0, NULL, nubus_read_proc, NULL); |
| nubus_proc_init(); |
| #endif |
| return 0; |
| } |
| |
| subsys_initcall(nubus_init); |