arch/powerpc/platforms/85xx/p1010rdb.c

/*
 * P1010RDB Board Setup
 *
 * Copyright 2011 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>

#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>

#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>

#include "mpc85xx.h"

void __init p1010_rdb_pic_init(void)
{
	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
	  MPIC_SINGLE_DEST_CPU,
	  0, 256, " OpenPIC  ");

	BUG_ON(mpic == NULL);

	mpic_init(mpic);
}


/*
 * Setup the architecture
 */
static void __init p1010_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
	struct device_node *np;
#endif

	if (ppc_md.progress)
		ppc_md.progress("p1010_rdb_setup_arch()", 0);

#ifdef CONFIG_PCI
	for_each_node_by_type(np, "pci") {
		if (of_device_is_compatible(np, "fsl,p1010-pcie"))
			fsl_add_bridge(np, 0);
	}

#endif

	printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
}

machine_device_initcall(p1010_rdb, mpc85xx_common_publish_devices);
machine_arch_initcall(p1010_rdb, swiotlb_setup_bus_notifier);

/*
 * Called very early, device-tree isn't unflattened
 */
static int __init p1010_rdb_probe(void)
{
	unsigned long root = of_get_flat_dt_root();

	if (of_flat_dt_is_compatible(root, "fsl,P1010RDB"))
		return 1;
	return 0;
}

define_machine(p1010_rdb) {
	.name			= "P1010 RDB",
	.probe			= p1010_rdb_probe,
	.setup_arch		= p1010_rdb_setup_arch,
	.init_IRQ		= p1010_rdb_pic_init,
#ifdef CONFIG_PCI
	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
#endif
	.get_irq		= mpic_get_irq,
	.restart		= fsl_rstcr_restart,
	.calibrate_decr		= generic_calibrate_decr,
	.progress		= udbg_progress,
};