Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: switch /proc/led to seq_file
sparc64: IO accessors fix
diff --git a/.gitignore b/.gitignore
index 9c0d650..d24ad50 100644
--- a/.gitignore
+++ b/.gitignore
@@ -52,6 +52,7 @@
# cscope files
cscope.*
+ncscope.*
*.orig
*~
diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5ac1e01..5f50097 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -14,6 +14,10 @@
non-block filesystems which provide their own BDI, such as NFS
and FUSE.
+MAJOR:MINOR-fuseblk
+
+ Value of st_dev on fuseblk filesystems.
+
default
The default backing dev, used for non-block device backed
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 77c42f4..2510763 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -703,6 +703,31 @@
</sect1>
</chapter>
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+ <para>
+ There are functions that try to acquire a lock only once and immediately
+ return a value telling about success or failure to acquire the lock.
+ They can be used if you need no access to the data protected with the lock
+ when some other thread is holding the lock. You should acquire the lock
+ later if you then need access to the data protected with the lock.
+ </para>
+
+ <para>
+ <function>spin_trylock()</function> does not spin but returns non-zero if
+ it acquires the spinlock on the first try or 0 if not. This function can
+ be used in all contexts like <function>spin_lock</function>: you must have
+ disabled the contexts that might interrupt you and acquire the spin lock.
+ </para>
+
+ <para>
+ <function>mutex_trylock()</function> does not suspend your task
+ but returns non-zero if it could lock the mutex on the first try
+ or 0 if not. This function cannot be safely used in hardware or software
+ interrupt contexts despite not sleeping.
+ </para>
+</chapter>
+
<chapter id="Examples">
<title>Common Examples</title>
<para>
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 6a9c55b..dcec056 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -129,14 +129,6 @@
intervals the CPU needs to be on average more than 80% in use to then
decide that the CPU frequency needs to be increased.
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency. When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency. Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
ignore_nice_load: this parameter takes a value of '0' or '1'. When
set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1', the processes that are
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
new file mode 100644
index 0000000..2fefaf5
--- /dev/null
+++ b/Documentation/hwmon/ibmaem
@@ -0,0 +1,37 @@
+Kernel driver ibmaem
+======================
+
+Supported systems:
+ * Any recent IBM System X server with Active Energy Manager support.
+ This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+ x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
+ driver ("ipmi-si") needs to be loaded for this driver to do anything.
+ Prefix: 'ibmaem'
+ Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC. All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces. This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software. Setting the power cap from the host
+is not currently supported.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 3be8ab2..82fafe0 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -157,6 +157,9 @@
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
+
+ /* Outstanding buffers */
+ unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
+ vq->inflight++;
return head;
}
@@ -719,6 +723,7 @@
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
+ vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
- /* If they don't want an interrupt, don't send one. */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ /* If they don't want an interrupt, don't send one, unless empty. */
+ if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ && vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */
diff --git a/MAINTAINERS b/MAINTAINERS
index a029161..0a6d2ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -982,13 +982,6 @@
W: http://sourceforge.net/projects/bonding/
S: Supported
-BROADBAND PROCESSOR ARCHITECTURE
-P: Arnd Bergmann
-M: arnd@arndb.de
-L: linuxppc-dev@ozlabs.org
-W: http://www.penguinppc.org/ppc64/
-S: Supported
-
BROADCOM B44 10/100 ETHERNET DRIVER
P: Gary Zambrano
M: zambrano@broadcom.com
@@ -1052,6 +1045,14 @@
L: discuss@x86-64.org
S: Maintained
+CELL BROADBAND ENGINE ARCHITECTURE
+P: Arnd Bergmann
+M: arnd@arndb.de
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: maxextreme@gmail.com
@@ -1239,6 +1240,20 @@
W: http://linuxtv.org
S: Maintained
+CXGB3 ETHERNET DRIVER (CXGB3)
+P: Divy Le Ray
+M: divy@chelsio.com
+L: netdev@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+
+CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
+P: Steve Wise
+M: swise@chelsio.com
+L: general@lists.openfabrics.org
+W: http://www.openfabrics.org
+S: Supported
+
CYBERPRO FB DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
@@ -1645,8 +1660,10 @@
S: Maintained
FREESCALE DMA DRIVER
-P; Zhang Wei
-M: wei.zhang@freescale.com
+P: Li Yang
+M: leoli@freescale.com
+P: Zhang Wei
+M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -3142,7 +3159,7 @@
P: Linas Vepstas
M: linas@austin.ibm.com
L: linux-kernel@vger.kernel.org
-L: linux-pci@atrey.karlin.mff.cuni.cz
+L: linux-pci@vger.kernel.org
S: Supported
PCI SUBSYSTEM
@@ -3776,6 +3793,14 @@
L: spi-devel-general@lists.sourceforge.net
S: Maintained
+SPU FILE SYSTEM
+P: Jeremy Kerr
+M: jk@ozlabs.org
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
@@ -4350,6 +4375,14 @@
L: linux-kernel@vger.kernel.org
S: Maintained
+UTIL-LINUX-NG PACKAGE
+P: Karel Zak
+M: kzak@redhat.com
+L: util-linux-ng@vger.kernel.org
+W: http://kernel.org/~kzak/util-linux-ng/
+T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+S: Maintained
+
VFAT/FAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
diff --git a/Makefile b/Makefile
index 20b3235..8db70fe 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121f..f446477 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
#include "generic.h"
/*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb..62e653a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@
lm_set_drvdata(dev, impd1);
- printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+ printk("IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e..c07f497 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
- printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
+ extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a0b16a7..a4d2012 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@@ -315,14 +314,6 @@
#define palmte_get_power_status NULL
#endif
-static struct tsc2102_config palmte_tsc2102_config = {
- .use_internal = 0,
- .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
- .temp_at25c = { 2200, 2615 },
- .apm_report = palmte_get_power_status,
- .alsa_config = &palmte_alsa_config,
-};
-
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@@ -336,7 +327,6 @@
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
- .platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dace382..e7d0fcd 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -38,7 +38,6 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a235..27f63d5 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c564233..4c4b5c4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
@@ -282,7 +282,7 @@
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb6..2f772a3 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@
int ret = 0;
/* cpu initialize */
- GAFR = ( GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
- GPIO_32_768kHz );
+ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+ GPIO_MCP_CLK | GPIO_32_768kHz;
- GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
- GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
- GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
- GPLR = GPIO_GPIO18;
+ GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+ COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+ COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
- // PPC pin setting
- PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
- PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
- PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
+ PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
+ PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+ COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_32_768kHz;
+ PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+ PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+ PCFR = PCFR_OPDE;
+
platform_scoop_config = &collie_pcmcia_config;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2946c19..2db5580 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3..2f01af5 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@
/* rename any peripherals used differing from the s3c2410 */
+ s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 0604607..119edb8 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -37,17 +37,15 @@
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,11 +59,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -73,11 +73,21 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -101,10 +111,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -141,16 +156,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -164,9 +182,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -202,6 +221,7 @@
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -255,87 +275,40 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -343,54 +316,25 @@
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
@@ -407,7 +351,6 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -415,6 +358,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -450,6 +394,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -531,11 +476,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -568,11 +520,13 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -586,6 +540,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -599,7 +554,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -621,6 +575,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -633,6 +588,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -640,21 +596,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -665,27 +613,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -702,9 +646,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -724,12 +686,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -753,14 +725,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -772,6 +742,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -787,6 +758,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -797,11 +769,13 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -816,6 +790,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -844,19 +820,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -865,10 +844,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -885,14 +860,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -948,8 +920,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,12 +931,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1030,11 +1002,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1042,6 +1009,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,7 +1020,9 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,12 +1036,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1083,52 +1055,90 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
@@ -1137,10 +1147,6 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 2fb2ede..c6d02ea 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -36,15 +36,15 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,11 +58,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -70,11 +72,21 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -98,10 +110,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -147,16 +164,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -170,9 +190,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -208,6 +229,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -252,8 +274,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -279,6 +303,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -314,6 +339,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -368,6 +394,7 @@
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -395,13 +422,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -444,6 +476,9 @@
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -469,11 +504,13 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -487,6 +524,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -500,7 +538,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -556,6 +593,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -568,6 +606,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -575,21 +614,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -600,27 +631,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -637,9 +664,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -659,12 +704,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -682,8 +737,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -749,7 +804,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -761,14 +820,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -781,6 +838,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -796,6 +854,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -806,17 +865,20 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
#
@@ -825,6 +887,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -853,19 +917,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -874,10 +941,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,14 +958,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -957,8 +1017,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -966,7 +1028,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1028,11 +1089,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1040,6 +1096,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1050,7 +1107,9 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1064,12 +1123,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1081,52 +1142,90 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 45e23e0..5a4ae6b 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -39,17 +39,15 @@
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,11 +61,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +75,20 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -103,10 +112,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -152,16 +166,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -175,9 +192,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -234,8 +252,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -260,6 +276,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -295,6 +312,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -349,6 +367,7 @@
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -376,13 +395,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -427,6 +451,9 @@
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -447,6 +474,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -460,7 +488,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -516,6 +543,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -528,6 +556,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -535,21 +564,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -560,27 +581,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -597,9 +614,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -619,12 +654,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -682,7 +727,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -694,14 +743,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -714,6 +761,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -729,6 +777,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -739,17 +788,20 @@
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
#
@@ -758,6 +810,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -786,19 +840,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -807,11 +864,8 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
#
# File systems
@@ -828,14 +882,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -891,8 +942,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@@ -943,11 +996,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -955,6 +1003,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -965,6 +1014,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -978,12 +1028,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1000,6 +1052,8 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 634c527..a0912fb 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -34,15 +34,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -54,24 +54,38 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -115,16 +129,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -134,20 +151,7 @@
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
#
# Bus options
@@ -197,8 +201,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -222,6 +224,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -255,6 +258,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -321,6 +325,7 @@
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -346,6 +351,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -358,6 +364,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -365,15 +372,9 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -389,9 +390,24 @@
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -411,12 +427,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -434,8 +460,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -467,14 +493,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
@@ -485,6 +509,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -499,8 +524,11 @@
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -519,15 +547,17 @@
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -536,18 +566,14 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# File systems
#
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -580,7 +606,6 @@
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -588,6 +613,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -608,6 +634,8 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 80f55f8..84a7d44 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -29,7 +29,9 @@
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
+
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
@@ -41,6 +43,8 @@
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 235524b..5dd8d25 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -108,5 +108,4 @@
{
return cpufreq_register_driver(&at32_driver);
}
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index e698554..3a3e961 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -10,8 +10,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 3daf960..4685b7a 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -76,4 +76,4 @@
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
RTS;
-ENDPROC(_outsw)
+ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index bb6d58c..fa4f4e8 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -647,10 +647,10 @@
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
+ .irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 87e450f..c94f7a5 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,7 @@
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
deleted file mode 100644
index 4e9ea42..0000000
--- a/arch/blackfin/mach-bf537/boards/led.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 12;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
- R2 = ~R1;
-
- P0.H = hi(PORTF_FER);
- P0.L = lo(PORTF_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_DIR);
- P0.L = lo(PORTFIO_DIR);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_INEN);
- P0.L = lo(PORTFIO_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- R1 = ~R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index eed161d..319ef54 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,5 +2,5 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3b74f96..4f4ae87 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -684,7 +684,7 @@
static int __init cm_bf548_init(void)
{
- printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
deleted file mode 100644
index f47daf3..0000000
--- a/arch/blackfin/mach-bf548/boards/led.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6 LED2 ---- PG7 *
- * LED3 ---- PG8 LED4 ---- PG9 *
- * LED5 ---- PG10 LED6 ---- PG11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 0;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
- R2 = ~R1;
-
- P0.H = hi(PORTG_FER);
- P0.L = lo(PORTG_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTG_DIR_SET);
- P0.L = lo(PORTG_DIR_SET);
- W[P0] = R1.L;
- SSYNC;
-
- P0.H = hi(PORTG_INEN);
- P0.L = lo(PORTG_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_SET);
- P0.L = lo(PORTG_SET);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_CLEAR);
- P0.L = lo(PORTG_CLEAR);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index b841ecf..9af7740 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -26,6 +26,7 @@
#include <linux/types.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/segment.h>
@@ -56,7 +57,9 @@
*/
static unsigned long empty_bad_page_table;
static unsigned long empty_bad_page;
+
unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
/*****************************************************************************/
/*
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 6678c49..80b44ea 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1076,48 +1076,6 @@
DBG_FAULT(15)
FAULT(15)
- /*
- * Squatting in this space ...
- *
- * This special case dispatcher for illegal operation faults allows preserved
- * registers to be modified through a callback function (asm only) that is handed
- * back from the fault handler in r8. Up to three arguments can be passed to the
- * callback function by returning an aggregate with the callback as its first
- * element, followed by the arguments.
- */
-ENTRY(dispatch_illegal_op_fault)
- .prologue
- .body
- SAVE_MIN_WITH_COVER
- ssm psr.ic | PSR_DEFAULT_BITS
- ;;
- srlz.i // guarantee that interruption collection is on
- ;;
-(p15) ssm psr.i // restore psr.i
- adds r3=8,r2 // set up second base pointer for SAVE_REST
- ;;
- alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
- mov out0=ar.ec
- ;;
- SAVE_REST
- PT_REGS_UNWIND_INFO(0)
- ;;
- br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0: ;;
- alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
- mov out0=r9
- mov out1=r10
- mov out2=r11
- movl r15=ia64_leave_kernel
- ;;
- mov rp=r15
- mov b6=r8
- ;;
- cmp.ne p6,p0=0,r8
-(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
- br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
.org ia64_ivt+0x4000
/////////////////////////////////////////////////////////////////////////////////////////
// 0x4000 Entry 16 (size 64 bundles) Reserved
@@ -1715,6 +1673,48 @@
DBG_FAULT(67)
FAULT(67)
+ /*
+ * Squatting in this space ...
+ *
+ * This special case dispatcher for illegal operation faults allows preserved
+ * registers to be modified through a callback function (asm only) that is handed
+ * back from the fault handler in r8. Up to three arguments can be passed to the
+ * callback function by returning an aggregate with the callback as its first
+ * element, followed by the arguments.
+ */
+ENTRY(dispatch_illegal_op_fault)
+ .prologue
+ .body
+ SAVE_MIN_WITH_COVER
+ ssm psr.ic | PSR_DEFAULT_BITS
+ ;;
+ srlz.i // guarantee that interruption collection is on
+ ;;
+(p15) ssm psr.i // restore psr.i
+ adds r3=8,r2 // set up second base pointer for SAVE_REST
+ ;;
+ alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
+ mov out0=ar.ec
+ ;;
+ SAVE_REST
+ PT_REGS_UNWIND_INFO(0)
+ ;;
+ br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0: ;;
+ alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
+ mov out0=r9
+ mov out1=r10
+ mov out2=r11
+ movl r15=ia64_leave_kernel
+ ;;
+ mov rp=r15
+ mov b6=r8
+ ;;
+ cmp.ne p6,p0=0,r8
+(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
+ br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
#ifdef CONFIG_IA32_SUPPORT
/*
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 7c548ac..74b6d67 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -15,6 +15,9 @@
#define ACCOUNT_SYS_ENTER
#endif
+.section ".data.patch.rse", "a"
+.previous
+
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
@@ -40,7 +43,7 @@
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
@@ -87,6 +90,7 @@
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
+ WORKAROUND; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
@@ -206,6 +210,40 @@
st8 [r25]=r10; /* ar.ssd */ \
;;
-#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, )
+#define RSE_WORKAROUND \
+(pUStk) extr.u r17=r18,3,6; \
+(pUStk) sub r16=r18,r22; \
+[1:](pKStk) br.cond.sptk.many 1f; \
+ .xdata4 ".data.patch.rse",1b-. \
+ ;; \
+ cmp.ge p6,p7 = 33,r17; \
+ ;; \
+(p6) mov r17=0x310; \
+(p7) mov r17=0x308; \
+ ;; \
+ cmp.leu p1,p0=r16,r17; \
+(p1) br.cond.sptk.many 1f; \
+ dep.z r17=r26,0,62; \
+ movl r16=2f; \
+ ;; \
+ mov ar.pfs=r17; \
+ dep r27=r0,r27,16,14; \
+ mov b0=r16; \
+ ;; \
+ br.ret.sptk b0; \
+ ;; \
+2: \
+ mov ar.rsc=r0 \
+ ;; \
+ flushrs; \
+ ;; \
+ mov ar.bspstore=r22 \
+ ;; \
+ mov r18=ar.bsp; \
+ ;; \
+1: \
+ .pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , )
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index e0dca87..b83b2c5 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -115,6 +115,29 @@
ia64_srlz_i();
}
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+ s32 *offp = (s32 *) start;
+ u64 ip, *b;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) offp + *offp;
+
+ b = (u64 *)(ip & -16);
+ b[1] &= ~0xf800000L;
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
void __init
ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
{
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index e9596cd..f48a809 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -560,6 +560,17 @@
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
+#ifdef CONFIG_ITANIUM
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+ {
+ u64 num_phys_stacked;
+
+ if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+ }
+#endif
+
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 80622ac..5929ab1 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -156,6 +156,13 @@
__end___vtop_patchlist = .;
}
+ .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+ {
+ __start___rse_patchlist = .;
+ *(.data.patch.rse)
+ __end___rse_patchlist = .;
+ }
+
.data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;
diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c
index 891e134..4253f87 100644
--- a/arch/m68k/lib/string.c
+++ b/arch/m68k/lib/string.c
@@ -15,6 +15,12 @@
}
EXPORT_SYMBOL(strcpy);
+char *strcat(char *dest, const char *src)
+{
+ return __kernel_strcpy(dest + __kernel_strlen(dest), src);
+}
+EXPORT_SYMBOL(strcat);
+
void *memset(void *s, int c, size_t count)
{
void *xs = s;
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2347294..2f50acd 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -20,21 +20,19 @@
mktree
uImage
cuImage.*
+dtbImage.*
treeImage.*
zImage
+zImage.initrd
zImage.bin.*
zImage.chrp
zImage.coff
-zImage.coff.lds
-zImage.ep*
+zImage.holly
zImage.iseries
zImage.*lds
zImage.miboot
zImage.pmac
zImage.pseries
-zImage.redboot*
-zImage.sandpoint
-zImage.vmode
zconf.h
zlib.h
zutil.h
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 7822d25..f5e0b2a 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -99,7 +99,7 @@
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
- empty.c zImage zImage.coff.lds zImage.ps3.lds zImage.lds
+ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@@ -339,7 +339,9 @@
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
otheros.bld *.dtb
# clean up files cached by wrapper
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 1e7802c..fea5925 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -271,27 +271,35 @@
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8349-dma";
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
cell-index = <0>;
dma-channel@0 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@80 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@100 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@180 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 08a780d..fa9b6bb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -251,14 +251,14 @@
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
@@ -266,7 +266,7 @@
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
@@ -274,7 +274,7 @@
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
@@ -282,7 +282,7 @@
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index d7fd298..05360d4 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:37 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:00:44 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -95,6 +98,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -115,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -217,11 +223,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -245,6 +253,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -254,11 +263,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +308,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -398,6 +405,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
@@ -484,22 +492,8 @@
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -641,7 +635,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
@@ -684,7 +677,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -703,6 +695,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -710,6 +703,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -813,6 +807,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -853,13 +848,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -890,6 +879,7 @@
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -899,19 +889,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -928,12 +912,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -953,8 +947,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1072,11 +1066,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1112,6 +1108,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1153,14 +1150,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1180,7 +1174,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1314,6 +1307,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1334,6 +1328,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1344,6 +1339,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1357,6 +1353,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1371,6 +1368,7 @@
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1382,50 +1380,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 88338a9..db34909 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:18 2008
#
CONFIG_PPC64=y
@@ -29,6 +29,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +123,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -165,11 +171,11 @@
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
@@ -190,6 +196,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -224,7 +231,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -248,12 +254,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -278,7 +286,10 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -325,8 +336,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -342,6 +351,7 @@
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -418,6 +428,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -465,7 +476,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -506,7 +516,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -584,61 +594,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -740,7 +699,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -755,10 +713,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -769,6 +727,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -865,6 +824,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -895,13 +855,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -930,6 +884,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -939,19 +894,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -968,12 +917,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -995,8 +954,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1112,6 +1071,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1198,11 +1158,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1222,6 +1182,7 @@
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
@@ -1245,11 +1206,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1288,6 +1251,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1342,9 +1306,11 @@
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
@@ -1383,14 +1349,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1420,9 +1383,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -1488,13 +1451,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
@@ -1583,9 +1544,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1603,6 +1565,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1613,18 +1576,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1648,53 +1616,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index b3128fb..63f0bdb 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:45 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:36 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +122,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -172,11 +178,11 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -212,7 +218,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -234,12 +239,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -263,7 +270,10 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -310,8 +320,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -327,6 +335,7 @@
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -631,7 +640,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-CONFIG_PCNET32_NAPI=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -667,7 +675,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -682,10 +689,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -696,6 +703,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ISERIES_VETH=y
# CONFIG_FDDI is not set
@@ -762,6 +770,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -793,12 +802,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -815,12 +819,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -854,14 +868,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,9 +906,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
@@ -966,13 +977,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1047,9 +1056,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1071,6 +1081,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1081,18 +1092,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1116,53 +1132,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 09f3062..199e5f5 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
#
CONFIG_PPC64=y
@@ -29,6 +29,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -87,6 +90,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -167,11 +173,11 @@
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
@@ -192,6 +198,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -226,7 +233,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -249,12 +255,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@@ -290,9 +298,12 @@
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -341,8 +352,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -473,6 +482,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +530,6 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
#
@@ -554,7 +563,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -632,7 +641,10 @@
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -642,7 +654,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -689,6 +700,7 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -791,7 +803,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -810,6 +821,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -817,6 +829,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -890,6 +903,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -917,7 +931,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -936,13 +949,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
@@ -971,6 +978,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -980,19 +988,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1062,12 +1064,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1094,8 +1106,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1213,6 +1225,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1292,11 +1305,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1334,11 +1347,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1354,6 +1369,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1375,6 +1391,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
@@ -1416,6 +1433,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -1475,10 +1493,6 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1576,12 +1590,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1665,9 +1677,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1677,6 +1690,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1684,6 +1698,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1694,18 +1709,23 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1735,53 +1755,83 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index fca1142..3688e4b 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:21 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:02:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +122,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -185,6 +190,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -236,16 +242,17 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
@@ -292,6 +299,7 @@
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -301,11 +309,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -352,8 +360,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -369,6 +375,7 @@
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_DCCP=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -445,6 +452,7 @@
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -586,7 +594,6 @@
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
@@ -598,7 +605,7 @@
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
@@ -607,7 +614,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -629,6 +635,7 @@
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -720,7 +727,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -906,7 +913,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -940,7 +946,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -959,6 +964,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -992,6 +998,8 @@
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
@@ -1110,6 +1118,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1156,13 +1165,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1192,6 +1195,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1201,19 +1205,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1230,6 +1228,7 @@
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
@@ -1243,12 +1242,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1276,8 +1285,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1413,6 +1422,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1505,11 +1515,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1543,17 +1553,18 @@
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1587,7 +1598,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1642,9 +1655,11 @@
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1695,14 +1710,12 @@
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1786,13 +1799,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1877,9 +1888,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1901,6 +1913,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1911,6 +1924,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1923,6 +1937,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1936,6 +1951,7 @@
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1947,54 +1963,84 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 970282b..40f84fa 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:24 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:02 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -82,6 +85,7 @@
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
@@ -101,6 +105,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +113,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -129,12 +135,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -194,11 +202,11 @@
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_PPC_CELLEB=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_CELLEB=y
#
# Cell Broadband Engine options
@@ -241,6 +249,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -277,7 +286,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -307,6 +315,7 @@
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
@@ -314,6 +323,7 @@
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -356,7 +366,10 @@
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -406,8 +419,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -423,6 +434,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -501,6 +513,7 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -571,6 +584,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
@@ -618,7 +632,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -661,7 +674,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -747,64 +760,10 @@
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=y
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-CONFIG_PATA_SCC=y
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -866,6 +825,7 @@
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -911,7 +871,6 @@
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -947,7 +906,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -969,6 +927,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -979,6 +938,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -1083,6 +1043,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1121,8 +1082,6 @@
CONFIG_HVCS=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1141,13 +1100,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1177,6 +1130,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1186,19 +1140,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -1215,12 +1163,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1240,8 +1198,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1363,6 +1321,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1455,11 +1414,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1497,12 +1456,14 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1538,6 +1499,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1579,6 +1541,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
@@ -1607,10 +1570,6 @@
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1659,10 +1618,6 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1696,9 +1651,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -1764,13 +1719,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1862,9 +1815,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1888,6 +1842,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1898,18 +1853,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1941,53 +1901,83 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 3e2593c..adaa05f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:28 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:28 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -81,6 +84,7 @@
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
@@ -100,6 +104,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +112,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -129,12 +135,14 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -178,11 +186,11 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
@@ -225,7 +233,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -255,6 +262,7 @@
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -263,6 +271,7 @@
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -291,7 +300,10 @@
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -338,8 +350,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -355,6 +365,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -426,6 +437,7 @@
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -492,6 +504,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
@@ -545,7 +558,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -584,7 +596,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -671,61 +683,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -783,7 +744,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -820,7 +780,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -829,7 +788,6 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
-CONFIG_EHEA=m
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
@@ -838,10 +796,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -852,6 +810,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -956,6 +915,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1000,13 +960,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1035,6 +989,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1044,19 +999,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -1073,12 +1022,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1098,8 +1057,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1209,11 +1168,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1247,7 +1208,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1290,6 +1253,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1312,10 +1276,6 @@
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1349,11 +1309,12 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -1419,13 +1380,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
@@ -1500,9 +1459,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1526,6 +1486,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1536,18 +1497,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1577,53 +1543,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 8e24fc1..31729a9 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2"
+reloc_got2 kernstart_addr"
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index ddeaf9e..b9ba7d9 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -1,6 +1,4 @@
/*
- * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 80d1bab..e0ff59f 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -402,7 +402,7 @@
return;
}
- map_page(address, phys, flags);
+ map_page(address, phys, pgprot_val(flags));
fixmaps++;
}
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5df..8a455eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@
mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
unsigned long flags;
@@ -150,7 +150,7 @@
const struct of_device_id *match)
{
struct mpc52xx_gpiochip *chip;
- struct mpc52xx_gpio_wkup *regs;
+ struct mpc52xx_gpio_wkup __iomem *regs;
struct of_gpio_chip *ofchip;
int ret;
@@ -260,7 +260,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@
{
struct mpc52xx_gpiochip *chip;
struct of_gpio_chip *ofchip;
- struct mpc52xx_gpio *regs;
+ struct mpc52xx_gpio __iomem *regs;
int ret;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt *regs = mm_gc->regs;
+ struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
out_be32(®s->mode, 0x04);
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c..0e04f8f 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@
static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- u##size *dst = b; \
+ __le##size *dst = b; \
for (; c != 0; c--, dst++) \
*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
scc_pciex_io_flush(bus); \
@@ -231,10 +231,11 @@
unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- const u##size *src = b; \
+ const __le##size *src = b; \
for (; c != 0; c--, src++) \
__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
}
+#define __le8 u8
#define cpu_to_le8(x) (x)
#define le8_to_cpu(x) (x)
PCIEX_PIO_FUNC(8, b)
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5b3fb2b..3a58ffa 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -317,6 +317,9 @@
return result;
}
+ lmb_add(start_addr, map.r1.size);
+ lmb_analyze();
+
result = online_pages(start_pfn, nr_pages);
if (result)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8619f2a..7680001 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1331,6 +1331,9 @@
unsigned long flags;
u32 reg;
+ if (!mpic)
+ return;
+
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi) {
reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
@@ -1346,23 +1349,6 @@
spin_unlock_irqrestore(&mpic_lock, flags);
}
-unsigned int mpic_irq_get_priority(unsigned int irq)
-{
- unsigned int is_ipi;
- struct mpic *mpic = mpic_find(irq, &is_ipi);
- unsigned int src = mpic_irq_to_hw(irq);
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&mpic_lock, flags);
- if (is_ipi)
- reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
- else
- reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
- spin_unlock_irqrestore(&mpic_lock, flags);
- return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
-}
-
void mpic_setup_this_cpu(void)
{
#ifdef CONFIG_SMP
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 602c268..5d529bc 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -60,8 +60,10 @@
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
EXPORT_SYMBOL(machine_check_exception);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1d03508..93acb3c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -308,6 +308,9 @@
config ARCH_SPARSEMEM_DEFAULT
def_bool y
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
source "mm/Kconfig"
comment "I/O subsystem configuration"
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 655d525..ad40729 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -130,6 +130,7 @@
P_DEBUG(" -= Work Queue =-\n");
i = 0;
+ get_online_cpus();
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
@@ -140,6 +141,7 @@
}
}
spin_unlock(&appldata_ops_lock);
+ put_online_cpus();
}
/*
@@ -266,12 +268,14 @@
len = *lenp;
if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len))
return -EFAULT;
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
if (buf[0] == '1')
__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
else if (buf[0] == '0')
__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
out:
*lenp = len;
*ppos += len;
@@ -314,10 +318,12 @@
return -EINVAL;
}
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
appldata_interval = interval;
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
interval);
@@ -556,8 +562,10 @@
return -ENOMEM;
}
+ get_online_cpus();
for_each_online_cpu(i)
appldata_online_cpu(i);
+ put_online_cpus();
/* Register cpu hotplug notifier */
register_hotcpu_notifier(&appldata_nb);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index aa341d0..c5cdb97 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Wed Apr 30 11:07:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Fri May 30 09:49:33 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
@@ -103,6 +103,7 @@
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -173,6 +174,7 @@
# CONFIG_PREEMPT_RCU is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -210,6 +212,7 @@
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
# CONFIG_CMM is not set
+# CONFIG_PAGE_STATES is not set
CONFIG_VIRT_TIMER=y
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
@@ -620,6 +623,7 @@
#
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+CONFIG_ACCESSIBILITY=y
#
# File systems
@@ -754,11 +758,12 @@
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_CHECK=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c14a336..d2f270c 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -208,7 +208,7 @@
[INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, /* e.g. madbr */
[INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
[INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
- [INSTR_RRF_R0RR] = { 0xff, R_24,R_28,R_16,0,0,0 }, /* e.g. idte */
+ [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, /* e.g. idte */
[INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, /* e.g. fixr */
[INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, /* e.g. cfebr */
[INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, /* e.g. sske */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 1f42289..42b1d12 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1089,7 +1089,7 @@
#ifdef CONFIG_HOTPLUG_CPU
-int smp_rescan_cpus(void)
+int __ref smp_rescan_cpus(void)
{
cpumask_t newcpus;
int cpu;
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 29f3a63..0559864 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -44,37 +44,34 @@
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ unsigned long i, total = 0, reserved = 0;
+ unsigned long shared = 0, cached = 0;
+ unsigned long flags;
struct page *page;
+ pg_data_t *pgdat;
printk("Mem-info:\n");
show_free_areas();
- i = max_mapnr;
- while (i-- > 0) {
- if (!pfn_valid(i))
- continue;
- page = pfn_to_page(i);
- total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (page_count(page))
- shared += page_count(page) - 1;
+ for_each_online_pgdat(pgdat) {
+ pgdat_resize_lock(pgdat, &flags);
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ if (!pfn_valid(pgdat->node_start_pfn + i))
+ continue;
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ pgdat_resize_unlock(pgdat, &flags);
}
- printk("%d pages of RAM\n", total);
- printk("%d reserved pages\n", reserved);
- printk("%d pages shared\n", shared);
- printk("%d pages swap cached\n", cached);
-
- printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
- printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK));
- printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
- printk("%lu pages slab\n",
- global_page_state(NR_SLAB_RECLAIMABLE) +
- global_page_state(NR_SLAB_UNRECLAIMABLE));
- printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE));
+ printk("%ld pages of RAM\n", total);
+ printk("%ld reserved pages\n", reserved);
+ printk("%ld pages shared\n", shared);
+ printk("%ld pages swap cached\n", cached);
}
/*
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index ea28048..f591188 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -27,12 +27,19 @@
static LIST_HEAD(mem_segs);
-static pud_t *vmem_pud_alloc(void)
+static void __ref *vmem_alloc_pages(unsigned int order)
+{
+ if (slab_is_available())
+ return (void *)__get_free_pages(GFP_KERNEL, order);
+ return alloc_bootmem_pages((1 << order) * PAGE_SIZE);
+}
+
+static inline pud_t *vmem_pud_alloc(void)
{
pud_t *pud = NULL;
#ifdef CONFIG_64BIT
- pud = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+ pud = vmem_alloc_pages(2);
if (!pud)
return NULL;
clear_table((unsigned long *) pud, _REGION3_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -40,12 +47,12 @@
return pud;
}
-static pmd_t *vmem_pmd_alloc(void)
+static inline pmd_t *vmem_pmd_alloc(void)
{
pmd_t *pmd = NULL;
#ifdef CONFIG_64BIT
- pmd = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+ pmd = vmem_alloc_pages(2);
if (!pmd)
return NULL;
clear_table((unsigned long *) pmd, _SEGMENT_ENTRY_EMPTY, PAGE_SIZE * 4);
@@ -207,13 +214,14 @@
if (pte_none(*pt_dir)) {
unsigned long new_page;
- new_page =__pa(vmemmap_alloc_block(PAGE_SIZE, 0));
+ new_page =__pa(vmem_alloc_pages(0));
if (!new_page)
goto out;
pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
*pt_dir = pte;
}
}
+ memset(start, 0, nr * sizeof(struct page));
ret = 0;
out:
flush_tlb_kernel_range(start_addr, end_addr);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8a68160..9a854c8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -281,7 +281,6 @@
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e..0f45498 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && (MMU || BROKEN)
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 452d0d6..2308e87 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
#include <linux/pm.h>
@@ -109,27 +108,6 @@
.resource = heartbeat_resources,
};
-static struct plat_serial8250_port uart_platform_data[] = {
- {
- .membase = (void __iomem *)0xb3e30000,
- .mapbase = 0xb3e30000,
- .iotype = UPIO_MEM,
- .irq = IRQ_VOYAGER,
- .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
- .regshift = 2,
- .uartclk = (9600 * 16),
- },
- { 0 },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart_platform_data,
- },
-};
-
static struct resource sm501_resources[] = {
[0] = {
.start = 0x10000000,
@@ -185,11 +163,7 @@
};
static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = SM501_USE_USB_HOST,
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
};
static struct sm501_platdata sm501_platform_data = {
@@ -208,7 +182,6 @@
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
- &uart_device,
&sm501_device,
&heartbeat_device,
&spi_sh_sci_device,
@@ -272,16 +245,6 @@
sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-
- /*
- * Power Mode Gate - Enable UART0
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
}
/*
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index ee59008..287408b 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Wed Feb 6 21:52:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Thu May 22 14:30:07 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -36,18 +37,16 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -61,11 +60,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -77,11 +78,15 @@
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -105,7 +110,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
@@ -118,6 +122,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +140,7 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -142,6 +148,7 @@
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -255,7 +262,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
@@ -323,8 +329,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -376,7 +380,90 @@
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -385,11 +472,13 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -461,6 +550,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -482,13 +572,20 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -508,6 +605,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -531,16 +629,40 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
#
-# SPI support
+# I2C Hardware Bus support
#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SH_MOBILE=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -553,12 +675,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -592,6 +724,8 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -608,6 +742,7 @@
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -623,7 +758,9 @@
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -640,15 +777,31 @@
# CONFIG_RTC_DRV_TEST is not set
#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -657,10 +810,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -673,13 +822,10 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -720,10 +866,13 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@@ -743,6 +892,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -763,48 +913,77 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
@@ -812,6 +991,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..a0ebd43
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda9..6b34baa 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 20:27:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -25,47 +27,82 @@
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
@@ -81,6 +118,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
#
# System type
@@ -88,7 +126,10 @@
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -121,23 +166,25 @@
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
@@ -213,11 +263,15 @@
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
@@ -225,25 +279,25 @@
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
#
# Networking
@@ -253,14 +307,24 @@
#
# Networking options
#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
@@ -273,14 +337,13 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -308,6 +367,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -356,6 +416,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@
CONFIG_MTD_PHYSMAP_START=0x20000000
CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -418,13 +478,19 @@
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -443,23 +509,30 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -502,6 +554,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -520,106 +573,119 @@
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_SH=y
# CONFIG_UIO is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
@@ -658,18 +725,28 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index ab77b0e..938817e3 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -154,4 +154,4 @@
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a..79baa47 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@
reg += 8;
}
}
+ }
#endif
/*
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index ebceb0d..be49269 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -132,6 +132,7 @@
switch (prr) {
case 0x50:
+ case 0x51:
boot_cpu_data.type = CPU_SH7723;
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
break;
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0693140..62ebccf 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,7 +16,7 @@
static struct resource usbf_resources[] = {
[0] = {
- .name = "USBF",
+ .name = "m66592_udc",
.start = 0x04480000,
.end = 0x044800FF,
.flags = IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 16925cf..566ce79 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -153,7 +153,7 @@
INTC_VECT(VIO_VOUI,0x8E0),
INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x920),
+ INTC_VECT(VPU_VPUI,0x980),
INTC_VECT(TPU_TPUI,0x9A0),
INTC_VECT(ADC_ADI,0x9E0),
INTC_VECT(USB_USI0,0xA20),
@@ -292,9 +292,3 @@
{
register_intc_controller(&intc_desc);
}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03..5482e65 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <asm/unaligned.h>
void *module_alloc(unsigned long size)
{
@@ -56,34 +57,6 @@
return 0;
}
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
- void *__s = &(sw), *__t = &(tw); \
- unsigned short *__s2 = __s, *__t2 = __t; \
- unsigned char *__s1 = __s, *__t1 = __t; \
- switch ((align)) \
- { \
- case 0: \
- *(unsigned long *) __t = *(unsigned long *) __s; \
- break; \
- case 2: \
- *__t2++ = *__s2++; \
- *__t2 = *__s2; \
- break; \
- default: \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1 = *__s1; \
- break; \
- } \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); }
-#endif
-
int apply_relocate_add(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
@@ -96,7 +69,6 @@
Elf32_Addr relocation;
uint32_t *location;
uint32_t value;
- int align;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@
sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend;
- align = (int)location & 3;
#ifdef CONFIG_SUPERH64
/* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_DIR32:
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_REL32:
relocation = (relocation - (Elf32_Addr) location);
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_IMM_LOW16:
*location = (*location & ~0x3fffc00) |
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index dba8e05..6976812 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -259,6 +259,8 @@
source "drivers/mtd/Kconfig"
endif
+source "drivers/leds/Kconfig"
+
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
bool
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index e980935..5f90358 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -50,7 +50,7 @@
return -EIO;
}
- pri->compiled = kmalloc(sizeof(struct bpf_program),
+ pri->compiled = uml_kmalloc(sizeof(struct bpf_program),
UM_GFP_KERNEL);
if (pri->compiled == NULL) {
printk(UM_KERN_ERR "pcap_open : kmalloc failed\n");
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 66e2a30..ccc02a6 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -60,6 +60,11 @@
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(add_sigio_fd);
+EXPORT_SYMBOL(ignore_sigio_fd);
+EXPORT_SYMBOL(deactivate_fd);
+EXPORT_SYMBOL(sigio_broken);
+
#ifdef CONFIG_SMP
/* required for SMP */
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index c6183e7..b487cbe 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,7 @@
*/
#include <errno.h>
+#include <sys/ptrace.h>
#include <asm/user.h>
#include "kern_constants.h"
#include "longjmp.h"
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 4d7d1a8..6604673 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -1,5 +1,7 @@
-#include "linux/module.h"
-#include "asm/string.h"
+#include <linux/module.h>
+#include <asm/string.h>
+#include <asm/checksum.h>
/*XXX: we need them because they would be exported by x86_64 */
EXPORT_SYMBOL(__memcpy);
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fe361ae..dcbec34 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,17 +26,10 @@
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
string
- depends on X86_32
- option defconfig_list
- default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
- string
- depends on X86_64
- option defconfig_list
- default "arch/x86/configs/x86_64_defconfig"
+ default "arch/x86/configs/i386_defconfig" if X86_32
+ default "arch/x86/configs/x86_64_defconfig" if X86_64
config GENERIC_LOCKBREAK
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index c1d00c02..50e47cd 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -56,7 +56,7 @@
if (type & LEFT)
type &= ~ZEROPAD;
if (base < 2 || base > 36)
- return 0;
+ return NULL;
c = (type & ZEROPAD) ? '0' : ' ';
sign = 0;
if (type & SIGN) {
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c49ebcc..33c5216 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -242,12 +242,19 @@
static void __cpuinit acpi_register_lapic(int id, u8 enabled)
{
+ unsigned int ver = 0;
+
if (!enabled) {
++disabled_cpus;
return;
}
- generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+ if (boot_cpu_physical_apicid != -1U)
+ ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+ generic_processor_info(id, ver);
}
static int __init
@@ -767,8 +774,13 @@
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
- if (boot_cpu_physical_apicid == -1U)
+ if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+ }
}
static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 5910020..0633cfd 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -534,7 +534,7 @@
*/
void clear_local_APIC(void)
{
- int maxlvt = lapic_get_maxlvt();
+ int maxlvt;
u32 v;
/* APIC hasn't been mapped yet */
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index af4a867..777a7ff 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -245,7 +245,7 @@
if ((ecx > 95) || (ecx == 0) || (eax < ebx))
return -EIO;
- edx = (eax - ebx) / (100 - ecx);
+ edx = ((eax - ebx) * 100) / (100 - ecx);
*low_freq = edx * 1000; /* back to kHz */
dprintk("low frequency is %u kHz\n", *low_freq);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 46d4034..206791e 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1127,12 +1127,23 @@
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
- printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
+#ifndef CONFIG_ACPI_PROCESSOR
+ printk(KERN_ERR PFX "ACPI Processor support is required "
+ "for SMP systems but is absent. Please load the "
+ "ACPI Processor module before starting this "
+ "driver.\n");
+#else
+ printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
+ "_PSS objects in a way that Linux understands. "
+ "Please report this to the Linux ACPI maintainers"
+ " and complain to your BIOS vendor.\n");
+#endif
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
+ printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
+ "CPU0. Complain to your BIOS vendor.\n");
kfree(data);
return -ENODEV;
}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e03cc95..eb9ddd8 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -56,6 +56,11 @@
void __init init_thread_xstate(void)
{
+ if (!HAVE_HWFP) {
+ xstate_size = sizeof(struct i387_soft_struct);
+ return;
+ }
+
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
#ifdef CONFIG_X86_32
@@ -94,7 +99,7 @@
int init_fpu(struct task_struct *tsk)
{
if (tsk_used_math(tsk)) {
- if (tsk == current)
+ if (HAVE_HWFP && tsk == current)
unlazy_fpu(tsk);
return 0;
}
@@ -109,6 +114,15 @@
return -ENOMEM;
}
+#ifdef CONFIG_X86_32
+ if (!HAVE_HWFP) {
+ memset(tsk->thread.xstate, 0, xstate_size);
+ finit();
+ set_stopped_child_used_math(tsk);
+ return 0;
+ }
+#endif
+
if (cpu_has_fxsr) {
struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
@@ -330,13 +344,13 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
+ if (!HAVE_HWFP)
+ return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0,
@@ -360,15 +374,15 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
set_stopped_child_used_math(target);
+ if (!HAVE_HWFP)
+ return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0, -1);
@@ -474,18 +488,18 @@
int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
{
int err;
+ struct task_struct *tsk = current;
- if (HAVE_HWFP) {
- struct task_struct *tsk = current;
-
+ if (HAVE_HWFP)
clear_fpu(tsk);
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+ if (HAVE_HWFP) {
if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
else
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 4bc1be5..08a3098 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -53,7 +53,7 @@
* have elapsed since the hypervisor wrote the data. So we try to account for
* that with system time
*/
-unsigned long kvm_get_wallclock(void)
+static unsigned long kvm_get_wallclock(void)
{
u32 wc_sec, wc_nsec;
u64 delta;
@@ -86,7 +86,7 @@
return ts.tv_sec + 1;
}
-int kvm_set_wallclock(unsigned long now)
+static int kvm_set_wallclock(unsigned long now)
{
return 0;
}
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c07455d..aa8ec92 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -26,6 +26,7 @@
#include <linux/kdebug.h>
#include <linux/scatterlist.h>
#include <linux/iommu-helper.h>
+#include <linux/sysdev.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <asm/mtrr.h>
@@ -548,6 +549,28 @@
return aper_base;
}
+static int gart_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+static int gart_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return -EINVAL;
+}
+
+static struct sysdev_class gart_sysdev_class = {
+ .name = "gart",
+ .suspend = gart_suspend,
+ .resume = gart_resume,
+
+};
+
+static struct sys_device device_gart = {
+ .id = 0,
+ .cls = &gart_sysdev_class,
+};
+
/*
* Private Northbridge GATT initialization in case we cannot use the
* AGP driver for some reason.
@@ -558,7 +581,7 @@
unsigned aper_base, new_aper_base;
struct pci_dev *dev;
void *gatt;
- int i;
+ int i, error;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
@@ -606,6 +629,12 @@
pci_write_config_dword(dev, 0x90, ctl);
}
+
+ error = sysdev_class_register(&gart_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_gart);
+ if (error)
+ panic("Could not register gart_sysdev -- would corrupt data on next suspend");
flush_gart();
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476df..6d54833 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -649,8 +649,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter > 5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f3..ac54ff5 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -658,8 +658,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter>5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
return prev_p;
}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 3898849..56078d6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1190,6 +1190,7 @@
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
+ preempt_disable();
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
@@ -1206,7 +1207,7 @@
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
- return;
+ goto out;
}
preempt_disable();
@@ -1246,6 +1247,8 @@
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+out:
+ preempt_enable();
}
/*
* Early setup to make printk work.
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index e479072..068759d 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,7 @@
#include "mach_timer.h"
-static int tsc_enabled;
+static int tsc_disabled;
/*
* On some systems the TSC frequency does not
@@ -28,8 +28,8 @@
static int __init tsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC completely.\n");
- mark_tsc_unstable("user disabled TSC");
+ "cannot disable TSC completely.\n");
+ tsc_disabled = 1;
return 1;
}
#else
@@ -120,7 +120,7 @@
* very important for it to be as fast as the platform
* can achive it. )
*/
- if (unlikely(!tsc_enabled && !tsc_unstable))
+ if (unlikely(tsc_disabled))
/* No locking but a rare wrong value is not a big deal: */
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
@@ -322,7 +322,6 @@
{
if (!tsc_unstable) {
tsc_unstable = 1;
- tsc_enabled = 0;
printk("Marking TSC unstable due to: %s.\n", reason);
/* Can be called before registration */
if (clocksource_tsc.mult)
@@ -336,7 +335,7 @@
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
- d->ident);
+ d->ident);
tsc_unstable = 1;
return 0;
}
@@ -403,14 +402,22 @@
{
int cpu;
- if (!cpu_has_tsc)
+ if (!cpu_has_tsc || tsc_disabled) {
+ /* Disable the TSC in case of !cpu_has_tsc */
+ tsc_disabled = 1;
return;
+ }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
+ /*
+ * We need to disable the TSC completely in this case
+ * to prevent sched_clock() from using it.
+ */
+ tsc_disabled = 1;
return;
}
@@ -441,8 +448,6 @@
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- } else
- tsc_enabled = 1;
-
+ }
clocksource_register(&clocksource_tsc);
}
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index fcc16e5..1784b80 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -227,14 +227,14 @@
/* hpet or pmtimer available ? */
if (!hpet && !pm1 && !pm2) {
printk(KERN_INFO "TSC calibrated against PIT\n");
- return;
+ goto out;
}
/* Check, whether the sampling was disturbed by an SMI */
if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
printk(KERN_WARNING "TSC calibration disturbed by SMI, "
"using PIT calibration result\n");
- return;
+ goto out;
}
tsc2 = (tsc2 - tsc1) * 1000000L;
@@ -255,6 +255,7 @@
tsc_khz = tsc2 / tsc1;
+out:
for_each_possible_cpu(cpu)
set_cyc2ns_scale(tsc_khz, cpu);
}
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 36c5406..7246b60 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1996,7 +1996,7 @@
.seeks = DEFAULT_SEEKS * 10,
};
-void mmu_destroy_caches(void)
+static void mmu_destroy_caches(void)
{
if (pte_chain_cache)
kmem_cache_destroy(pte_chain_cache);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index af65b2d..5c7e2fd 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -582,8 +582,9 @@
int vector = FIRST_EXTERNAL_VECTOR + i;
if (vector != SYSCALL_VECTOR) {
set_intr_gate(vector, interrupt[i]);
- set_irq_chip_and_handler(i, &lguest_irq_controller,
- handle_level_irq);
+ set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+ handle_level_irq,
+ "level");
}
}
/* This call is required to set up for 4k stacks, where we have
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 4535e6d..d710f2d 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -44,13 +44,36 @@
static void delay_tsc(unsigned long loops)
{
unsigned long bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are per-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
- } while ((now-bclock) < loops);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
+ }
preempt_enable();
}
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index bbc6105..4c441be 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -31,14 +31,36 @@
void __delay(unsigned long loops)
{
unsigned bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are pre-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
}
- while ((now-bclock) < loops);
preempt_enable();
}
EXPORT_SYMBOL(__delay);
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 6e38d87..c7b06fe 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -30,6 +30,7 @@
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/user.h>
+#include <asm/i387.h>
#include "fpu_system.h"
#include "fpu_emu.h"
@@ -146,6 +147,13 @@
unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
struct desc_struct code_descriptor;
+ if (!used_math()) {
+ if (init_fpu(current)) {
+ do_group_exit(SIGKILL);
+ return;
+ }
+ }
+
#ifdef RE_ENTRANT_CHECKING
if (emulating) {
printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
@@ -153,11 +161,6 @@
RE_ENTRANT_CHECK_ON;
#endif /* RE_ENTRANT_CHECKING */
- if (!used_math()) {
- finit();
- set_used_math();
- }
-
SETUP_DATA_AREA(arg);
FPU_ORIG_EIP = FPU_EIP;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 32ba13b..156e6d7 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -206,7 +206,7 @@
pmd_t *last_pmd = pmd + PTRS_PER_PMD;
for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
- if (!pmd_present(*pmd))
+ if (pmd_none(*pmd))
continue;
if (vaddr < (unsigned long) _text || vaddr > end)
set_pmd(pmd, __pmd(0));
@@ -506,7 +506,7 @@
static void __init early_memtest(unsigned long start, unsigned long end)
{
- unsigned long t_start, t_size;
+ u64 t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
@@ -525,7 +525,7 @@
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016lx - %016lx pattern %d",
+ printk(KERN_CONT "\n %016llx - %016llx pattern %d",
t_start, t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 71bb315..2b2bb3f 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -593,10 +593,11 @@
unsigned long offset;
unsigned int nrpages;
enum fixed_addresses idx;
- unsigned int nesting;
+ int nesting;
nesting = --early_ioremap_nested;
- WARN_ON(nesting < 0);
+ if (WARN_ON(nesting < 0))
+ return;
if (early_ioremap_debug) {
printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index de3a998..06b7a1c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -34,7 +34,7 @@
printk(KERN_INFO "%s\n", reason);
}
-static int nopat(char *str)
+static int __init nopat(char *str)
{
pat_disable("PAT support disabled.");
return 0;
@@ -151,32 +151,33 @@
unsigned long pat_type;
u8 mtrr_type;
- mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFF) { /* MTRR not enabled */
- *ret_prot = prot;
- return 0;
- }
- if (mtrr_type == 0xFE) { /* MTRR match error */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
- if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
- mtrr_type != MTRR_TYPE_WRBACK &&
- mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
-
pat_type = prot & _PAGE_CACHE_MASK;
prot &= (~_PAGE_CACHE_MASK);
- /* Currently doing intersection by hand. Optimize it later. */
+ /*
+ * We return the PAT request directly for types where PAT takes
+ * precedence with respect to MTRR and for UC_MINUS.
+ * Consistency checks with other PAT requests is done later
+ * while going through memtype list.
+ */
if (pat_type == _PAGE_CACHE_WC) {
*ret_prot = prot | _PAGE_CACHE_WC;
+ return 0;
} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
- } else if (pat_type == _PAGE_CACHE_UC ||
- mtrr_type == MTRR_TYPE_UNCACHABLE) {
+ return 0;
+ } else if (pat_type == _PAGE_CACHE_UC) {
+ *ret_prot = prot | _PAGE_CACHE_UC;
+ return 0;
+ }
+
+ /*
+ * Look for MTRR hint to get the effective type in case where PAT
+ * request is for WB.
+ */
+ mtrr_type = mtrr_type_lookup(start, end);
+
+ if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
*ret_prot = prot | _PAGE_CACHE_UC;
} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
*ret_prot = prot | _PAGE_CACHE_WC;
@@ -233,14 +234,12 @@
if (req_type == -1) {
/*
- * Special case where caller wants to inherit from mtrr or
- * existing pat mapping, defaulting to UC_MINUS in case of
- * no match.
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
*/
u8 mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFE) { /* MTRR match error */
- err = -1;
- }
if (mtrr_type == MTRR_TYPE_WRBACK) {
req_type = _PAGE_CACHE_WB;
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8545c8a..6e64aaf 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -302,18 +302,18 @@
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
#ifdef __i386__
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 23476c2..efa2ba7 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -106,9 +106,9 @@
do_realtime((struct timespec *)tv);
tv->tv_usec /= 1000;
if (unlikely(tz != NULL)) {
- /* This relies on gcc inlining the memcpy. We'll notice
- if it ever fails to do so. */
- memcpy(tz, >od->sys_tz, sizeof(struct timezone));
+ /* Avoid memcpy. Some old compilers fail to inline it */
+ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
+ tz->tz_dsttime = gtod->sys_tz.tz_dsttime;
}
return 0;
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 126766d..3525ef5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -60,7 +60,7 @@
{
unsigned int level;
pte_t *pte = lookup_address(address, &level);
- unsigned offset = address & PAGE_MASK;
+ unsigned offset = address & ~PAGE_MASK;
BUG_ON(pte == NULL);
diff --git a/block/blk-core.c b/block/blk-core.c
index 6a9cc0d..1905aab 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -806,35 +806,32 @@
rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
+ struct io_context *ioc;
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[rw], &wait,
TASK_UNINTERRUPTIBLE);
- rq = get_request(q, rw_flags, bio, GFP_NOIO);
+ blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
- if (!rq) {
- struct io_context *ioc;
+ __generic_unplug_device(q);
+ spin_unlock_irq(q->queue_lock);
+ io_schedule();
- blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
+ /*
+ * After sleeping, we become a "batching" process and
+ * will be able to allocate at least one request, and
+ * up to a big batch of them for a small period time.
+ * See ioc_batching, ioc_set_batching
+ */
+ ioc = current_io_context(GFP_NOIO, q->node);
+ ioc_set_batching(q, ioc);
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
- io_schedule();
-
- /*
- * After sleeping, we become a "batching" process and
- * will be able to allocate at least one request, and
- * up to a big batch of them for a small period time.
- * See ioc_batching, ioc_set_batching
- */
- ioc = current_io_context(GFP_NOIO, q->node);
- ioc_set_batching(q, ioc);
-
- spin_lock_irq(q->queue_lock);
- }
+ spin_lock_irq(q->queue_lock);
finish_wait(&rl->wait[rw], &wait);
- }
+
+ rq = get_request(q, rw_flags, bio, GFP_NOIO);
+ };
return rq;
}
diff --git a/block/blktrace.c b/block/blktrace.c
index b2cbb4e..7ae87cc 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -75,6 +75,23 @@
local_irq_restore(flags);
}
+void __trace_note_message(struct blk_trace *bt, const char *fmt, ...)
+{
+ int n;
+ va_list args;
+ char *buf;
+
+ preempt_disable();
+ buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
+ va_start(args, fmt);
+ n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
+ va_end(args);
+
+ trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
+ preempt_enable();
+}
+EXPORT_SYMBOL_GPL(__trace_note_message);
+
static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
pid_t pid)
{
@@ -232,6 +249,7 @@
debugfs_remove(bt->dropped_file);
blk_remove_tree(bt->dir);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
kfree(bt);
}
@@ -346,6 +364,10 @@
if (!bt->sequence)
goto err;
+ bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG);
+ if (!bt->msg_data)
+ goto err;
+
ret = -ENOENT;
dir = blk_create_tree(buts->name);
if (!dir)
@@ -392,6 +414,7 @@
if (bt->dropped_file)
debugfs_remove(bt->dropped_file);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
if (bt->rchan)
relay_close(bt->rchan);
kfree(bt);
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index b399c62..d01b411 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -124,6 +124,8 @@
struct cfq_queue {
/* reference count */
atomic_t ref;
+ /* various state flags, see below */
+ unsigned int flags;
/* parent cfq_data */
struct cfq_data *cfqd;
/* service_tree member */
@@ -138,14 +140,14 @@
int queued[2];
/* currently allocated requests */
int allocated[2];
- /* pending metadata requests */
- int meta_pending;
/* fifo list of requests in sort_list */
struct list_head fifo;
unsigned long slice_end;
long slice_resid;
+ /* pending metadata requests */
+ int meta_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
@@ -153,8 +155,6 @@
unsigned short ioprio, org_ioprio;
unsigned short ioprio_class, org_ioprio_class;
- /* various state flags, see below */
- unsigned int flags;
};
enum cfqq_state_flags {
@@ -1142,6 +1142,9 @@
kmem_cache_free(cfq_pool, cfqq);
}
+/*
+ * Must always be called with the rcu_read_lock() held
+ */
static void
__call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
@@ -1197,6 +1200,11 @@
cfq_cic_free(cic);
}
+/*
+ * Must be called with rcu_read_lock() held or preemption otherwise disabled.
+ * Only two callers of this - ->dtor() which is called with the rcu_read_lock(),
+ * and ->trim() which is called with the task lock held
+ */
static void cfq_free_io_context(struct io_context *ioc)
{
/*
@@ -1502,20 +1510,24 @@
cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
{
struct cfq_io_context *cic;
+ unsigned long flags;
void *k;
if (unlikely(!ioc))
return NULL;
+ rcu_read_lock();
+
/*
* we maintain a last-hit cache, to avoid browsing over the tree
*/
cic = rcu_dereference(ioc->ioc_data);
- if (cic && cic->key == cfqd)
+ if (cic && cic->key == cfqd) {
+ rcu_read_unlock();
return cic;
+ }
do {
- rcu_read_lock();
cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
rcu_read_unlock();
if (!cic)
@@ -1524,10 +1536,13 @@
k = cic->key;
if (unlikely(!k)) {
cfq_drop_dead_cic(cfqd, ioc, cic);
+ rcu_read_lock();
continue;
}
+ spin_lock_irqsave(&ioc->lock, flags);
rcu_assign_pointer(ioc->ioc_data, cic);
+ spin_unlock_irqrestore(&ioc->lock, flags);
break;
} while (1);
@@ -2134,6 +2149,10 @@
static void cfq_slab_kill(void)
{
+ /*
+ * Caller already ensured that pending RCU callbacks are completed,
+ * so we should have no busy allocations at this point.
+ */
if (cfq_pool)
kmem_cache_destroy(cfq_pool);
if (cfq_ioc_pool)
@@ -2292,6 +2311,11 @@
ioc_gone = &all_gone;
/* ioc_gone's update must be visible before reading ioc_count */
smp_wmb();
+
+ /*
+ * this also protects us from entering cfq_slab_kill() with
+ * pending RCU callbacks
+ */
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
cfq_slab_kill();
diff --git a/block/elevator.c b/block/elevator.c
index 980f8ae..902dd13 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -1110,6 +1110,8 @@
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
spin_unlock_irq(q->queue_lock);
+ blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
+
return 1;
fail_register:
diff --git a/crypto/cts.c b/crypto/cts.c
index c4e70bf..ccf9c5d 100644
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -89,6 +89,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
memset(s, 0, sizeof(s));
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
@@ -172,6 +175,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
lcldesc.tfm = ctx->child;
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index e48a3ea..2509809 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -565,7 +565,7 @@
acpi_os_release_mutex(method_desc->method.
mutex->mutex.os_mutex);
- method_desc->method.mutex->mutex.thread_id = 0;
+ method_desc->method.mutex->mutex.thread_id = NULL;
}
}
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index c873ab4..a8bf3d7 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -326,7 +326,7 @@
/* Clear mutex info */
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
return_ACPI_STATUS(status);
}
@@ -463,7 +463,7 @@
/* Mark mutex unowned */
obj_desc->mutex.owner_thread = NULL;
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
/* Update Thread sync_level (Last mutex is the important one) */
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 97f83fb..544b7d6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -502,10 +502,10 @@
{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a9027b8..81b7ae3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -247,10 +247,11 @@
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
- /* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+ /* Mobile SATA Controller IDE (ICH8M) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
@@ -526,7 +527,7 @@
[ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -573,6 +574,8 @@
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index dbf6ca7..3ff8b14 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -118,12 +118,62 @@
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
- *dev, u32 event)
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+ &arg_list, NULL)))
+ printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev)
+ dev->flags |= ATA_DFLAG_DETACH;
+ else {
+ struct ata_link *tlink;
+ struct ata_device *tdev;
+
+ ata_port_for_each_link(tlink, ap)
+ ata_link_for_each_dev(tdev, tlink)
+ tdev->flags |= ATA_DFLAG_DETACH;
+ }
+
+ ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function. If
+ * the event is port-wide @dev is NULL. If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context. May sleep.
+ */
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
+ u32 event, int is_dock_event)
{
char event_string[12];
char *envp[] = { event_string, NULL };
- struct ata_eh_info *ehi;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct kobject *kobj = NULL;
int wait = 0;
unsigned long flags;
@@ -131,87 +181,100 @@
unsigned long sta;
acpi_status status;
- if (!ap)
- ap = dev->link->ap;
- ehi = &ap->link.eh_info;
-
- spin_lock_irqsave(ap->lock, flags);
-
- if (dev)
+ if (dev) {
+ if (dev->sdev)
+ kobj = &dev->sdev->sdev_gendev.kobj;
handle = dev->acpi_handle;
- else
+ } else {
+ kobj = &ap->dev->kobj;
handle = ap->acpi_handle;
+ }
status = acpi_get_handle(handle, "_EJ0", &tmphandle);
- if (ACPI_FAILURE(status)) {
- /* This device is not ejectable */
- spin_unlock_irqrestore(ap->lock, flags);
+ if (ACPI_FAILURE(status))
+ /* This device does not support hotplug */
return;
- }
- status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status)) {
- printk ("Unable to determine bay status\n");
- spin_unlock_irqrestore(ap->lock, flags);
- return;
- }
+ spin_lock_irqsave(ap->lock, flags);
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
ata_ehi_push_desc(ehi, "ACPI event");
- if (!sta) {
- /* Device has been unplugged */
- if (dev)
- dev->flags |= ATA_DFLAG_DETACH;
- else {
- struct ata_link *tlink;
- struct ata_device *tdev;
- ata_port_for_each_link(tlink, ap) {
- ata_link_for_each_dev(tdev, tlink) {
- tdev->flags |=
- ATA_DFLAG_DETACH;
- }
- }
- }
- ata_port_schedule_eh(ap);
- wait = 1;
- } else {
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+ if (ACPI_FAILURE(status)) {
+ ata_port_printk(ap, KERN_ERR,
+ "acpi: failed to determine bay status (0x%x)\n",
+ status);
+ break;
+ }
+
+ if (sta) {
ata_ehi_hotplugged(ehi);
ata_port_freeze(ap);
+ } else {
+ /* The device has gone - unplug it */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
}
+ break;
+ case ACPI_NOTIFY_EJECT_REQUEST:
+ ata_ehi_push_desc(ehi, "ACPI event");
+
+ if (!is_dock_event)
+ break;
+
+ /* undock event - immediate unplug */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
+ break;
}
+ /* make sure kobj doesn't go away while ap->lock is released */
+ kobject_get(kobj);
+
spin_unlock_irqrestore(ap->lock, flags);
- if (wait)
+ if (wait) {
ata_port_wait_eh(ap);
+ ata_acpi_eject_device(handle);
+ }
- if (dev) {
- if (dev->sdev)
- kobj = &dev->sdev->sdev_gendev.kobj;
- } else
- kobj = &ap->dev->kobj;
-
- if (kobj) {
+ if (kobj && !is_dock_event) {
sprintf(event_string, "BAY_EVENT=%d", event);
kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
}
+
+ kobject_put(kobj);
+}
+
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_device *dev = data;
+
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+
+ ata_acpi_handle_hotplug(ap, NULL, event, 1);
}
static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_device *dev = data;
- ata_acpi_handle_hotplug(NULL, dev, event);
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
}
static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_port *ap = data;
- ata_acpi_handle_hotplug(ap, NULL, event);
+ ata_acpi_handle_hotplug(ap, NULL, event, 0);
}
/**
@@ -252,7 +315,7 @@
ata_acpi_ap_notify, ap);
/* we might be on a docking station */
register_hotplug_dock_device(ap->acpi_handle,
- ata_acpi_ap_notify, ap);
+ ata_acpi_ap_notify_dock, ap);
}
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
@@ -264,7 +327,7 @@
ata_acpi_dev_notify, dev);
/* we might be on a docking station */
register_hotplug_dock_device(dev->acpi_handle,
- ata_acpi_dev_notify, dev);
+ ata_acpi_dev_notify_dock, dev);
}
}
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3c89f20..cc816ca 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5403,7 +5403,7 @@
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 0f9386d..7daf4c0 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -322,9 +322,12 @@
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* class code report is unreliable */
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index aeb6e01..2e6e162 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1637,6 +1637,7 @@
/**
* ata_scsi_rbuf_get - Map response buffer.
+ * @cmd: SCSI command containing buffer to be mapped.
* @flags: unsigned long variable to store irq enable status
* @copy_in: copy in from user buffer
*
@@ -1954,7 +1955,7 @@
/**
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- * @bufp: output buffer
+ * @buf: output buffer
*
* Generate a generic MODE SENSE r/w error recovery page.
*
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3c2d228..90d20c6 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -247,7 +247,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->sff_check_altstatus)
return ap->ops->sff_check_altstatus(ap);
@@ -256,6 +256,93 @@
}
/**
+ * ata_sff_irq_status - Check if the device is busy
+ * @ap: port where the device is
+ *
+ * Determine if the port is currently busy. Uses altstatus
+ * if available in order to avoid clearing shared IRQ status
+ * when finding an IRQ source. Non ctl capable devices don't
+ * share interrupt lines fortunately for us.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+ u8 status;
+
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ status = ata_sff_altstatus(ap);
+ /* Not us: We are busy */
+ if (status & ATA_BUSY)
+ return status;
+ }
+ /* Clear INTRQ latch */
+ status = ata_sff_check_status(ap);
+ return status;
+}
+
+/**
+ * ata_sff_sync - Flush writes
+ * @ap: Port to wait for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ ap->ops->sff_check_altstatus(ap);
+ else if (ap->ioaddr.altstatus_addr)
+ ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_pause - Flush writes and wait 400nS
+ * @ap: Port to pause for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_sync(ap);
+ ndelay(400);
+}
+
+/**
+ * ata_sff_dma_pause - Pause before commencing DMA
+ * @ap: Port to pause for.
+ *
+ * Perform I/O fencing and ensure sufficient cycle delays occur
+ * for the HDMA1:0 transition
+ */
+
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ /* An altstatus read will cause the needed delay without
+ messing up the IRQ status */
+ ata_sff_altstatus(ap);
+ return;
+ }
+ /* There are no DMA controllers without ctl. BUG here to ensure
+ we never violate the HDMA1:0 transition timing and risk
+ corruption. */
+ BUG();
+}
+
+/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
@@ -742,7 +829,7 @@
} else
ata_pio_sector(qc);
- ata_sff_altstatus(qc->ap); /* flush */
+ ata_sff_sync(qc->ap); /* flush */
}
/**
@@ -763,8 +850,9 @@
WARN_ON(qc->dev->cdb_len < 12);
ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_sff_altstatus(ap); /* flush */
-
+ ata_sff_sync(ap);
+ /* FIXME: If the CDB is for DMA do we need to do the transition delay
+ or is bmdma_start guaranteed to do it ? */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
@@ -905,7 +993,7 @@
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_sff_altstatus(ap); /* flush */
+ ata_sff_sync(ap); /* flush */
return;
@@ -1489,14 +1577,10 @@
goto idle_irq;
}
- /* check altstatus */
- status = ata_sff_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
+ /* check main status, clearing INTRQ if needed */
+ status = ata_sff_irq_status(ap);
+ if (status & ATA_BUSY)
goto idle_irq;
/* ack bmdma irq events */
@@ -2030,7 +2114,7 @@
ap->ops->bmdma_stop(qc);
}
- ata_sff_altstatus(ap);
+ ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
@@ -2203,7 +2287,7 @@
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap);
}
/**
@@ -2722,7 +2806,8 @@
EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
EXPORT_SYMBOL_GPL(ata_sff_dev_select);
EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
EXPORT_SYMBOL_GPL(ata_sff_tf_load);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 1713843..cf9e984 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_sff_altstatus(ap);
+ ata_sff_dma_pause(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index a108d25..f8b3ffc 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -57,7 +57,9 @@
struct ata_host *ah = ap->host;
struct rb532_cf_info *info = ah->private_data;
- ata_sff_altstatus(ap);
+ /* FIXME: Keep previous delay. If this is merely a fence then
+ ata_sff_sync might be sufficient. */
+ ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e965b25..bbf5aa3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -726,7 +726,7 @@
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap); /* dummy read */
}
/**
@@ -747,7 +747,8 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((scc_check_altstatus(ap) & ATA_ERR)
+ && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 853559e..3924e72 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -395,7 +395,7 @@
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -438,6 +438,8 @@
ioread32(CA + hcr_base),
ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+ iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
+
/* Simply queue command to the controller/device */
iowrite32(1 << tag, CQ + hcr_base);
@@ -558,11 +560,36 @@
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
+static void sata_fsl_pmp_attach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
+}
+
+static void sata_fsl_pmp_detach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_PMP_ATTACHED;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* enable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+}
+
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sata_fsl_port_priv *pp;
- int retval;
void *mem;
dma_addr_t mem_dma;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
@@ -688,12 +715,13 @@
}
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
+ int pmp = sata_srst_pmp(link);
u32 temp;
struct ata_taskfile tf;
u8 *cfis;
@@ -703,6 +731,9 @@
DPRINTK("in xx_softreset\n");
+ if (pmp != SATA_PMP_CTRL_PORT)
+ goto issue_srst;
+
try_offline_again:
/*
* Force host controller to go off-line, aborting current operations
@@ -746,6 +777,7 @@
temp = ioread32(hcr_base + HCONTROL);
temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+ temp |= HCONTROL_PMP_ATTACHED;
iowrite32(temp, hcr_base + HCONTROL);
temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
@@ -771,7 +803,8 @@
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
}
/*
@@ -783,7 +816,8 @@
if ((temp & 0xFF) != 0x18) {
ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
} else {
ata_port_printk(ap, KERN_INFO,
"Signature Update detected @ %d msecs\n",
@@ -798,6 +832,7 @@
* reached here, we can send a command to the target device
*/
+issue_srst:
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
@@ -808,7 +843,7 @@
SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
cfis[0], cfis[1], cfis[2], cfis[3]);
@@ -854,8 +889,10 @@
sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
+ if (pmp != SATA_PMP_CTRL_PORT)
+ iowrite32(pmp, CQPMP + hcr_base);
iowrite32(1, CQ + hcr_base);
msleep(150); /* ?? */
@@ -886,12 +923,21 @@
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
}
+out:
return 0;
err:
return -EIO;
}
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+ DPRINTK("in xx_error_handler\n");
+ sata_pmp_error_handler(ap);
+
+}
+
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
@@ -905,18 +951,21 @@
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
- u32 hstatus, dereg, cereg = 0, SError = 0;
+ u32 hstatus, dereg=0, cereg = 0, SError = 0;
unsigned int err_mask = 0, action = 0;
- struct ata_queued_cmd *qc;
- int freeze = 0;
+ int freeze = 0, abort=0;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *qc = NULL;
+ struct ata_eh_info *ehi;
hstatus = ioread32(hcr_base + HSTATUS);
cereg = ioread32(hcr_base + CE);
+ /* first, analyze and record host port events */
+ link = &ap->link;
+ ehi = &link->eh_info;
ata_ehi_clear_desc(ehi);
/*
@@ -926,12 +975,41 @@
sata_fsl_scr_read(ap, SCR_ERROR, &SError);
if (unlikely(SError & 0xFFFF0000)) {
sata_fsl_scr_write(ap, SCR_ERROR, SError);
- err_mask |= AC_ERR_ATA_BUS;
}
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
+ /* handle fatal errors */
+ if (hstatus & FATAL_ERROR_DECODE) {
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+ ehi->action |= ATA_EH_SOFTRESET;
+
+ /*
+ * Ignore serror in case of fatal errors as we always want
+ * to do a soft-reset of the FSL SATA controller. Analyzing
+ * serror may cause libata to schedule a hard-reset action,
+ * and hard-reset currently does not do controller
+ * offline/online, causing command timeouts and leads to an
+ * un-recoverable state, hence make libATA ignore
+ * autopsy in case of fatal errors.
+ */
+
+ ehi->flags |= ATA_EHI_NO_AUTOPSY;
+
+ freeze = 1;
+ }
+
+ /* Handle PHYRDY change notification */
+ if (hstatus & INT_ON_PHYRDY_CHG) {
+ DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+ /* Setup a soft-reset EH action */
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
+ freeze = 1;
+ }
+
/* handle single device errors */
if (cereg) {
/*
@@ -943,58 +1021,68 @@
* clearing the device error, we can issue commands to the
* device to interrogate it to find the source of the error.
*/
- dereg = ioread32(hcr_base + DE);
- iowrite32(dereg, hcr_base + DE);
- iowrite32(cereg, hcr_base + CE);
+ abort = 1;
DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
ioread32(hcr_base + CE), ioread32(hcr_base + DE));
- /*
- * We should consider this as non fatal error, and TF must
- * be updated as done below.
- */
- err_mask |= AC_ERR_DEV;
- }
+ /* find out the offending link and qc */
+ if (ap->nr_pmp_links) {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
- /* handle fatal errors */
- if (hstatus & FATAL_ERROR_DECODE) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- /* how will fatal error interrupts be completed ?? */
- freeze = 1;
- }
+ if (dereg < ap->nr_pmp_links) {
+ link = &ap->pmp_link[dereg];
+ ehi = &link->eh_info;
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
- /* Handle PHYRDY change notification */
- if (hstatus & INT_ON_PHYRDY_CHG) {
- DPRINTK("SATA FSL: PHYRDY change indication\n");
+ err_mask |= AC_ERR_DEV;
- /* Setup a soft-reset EH action */
- ata_ehi_hotplugged(ehi);
- freeze = 1;
+ } else {
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_HARDRESET;
+ freeze = 1;
+ }
+ } else {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
+ err_mask |= AC_ERR_DEV;
+ }
}
/* record error info */
- qc = ata_qc_from_tag(ap, link->active_tag);
-
- if (qc)
+ if (qc) {
qc->err_mask |= err_mask;
- else
+ } else
ehi->err_mask |= err_mask;
ehi->action |= action;
- ehi->serror |= SError;
/* freeze or abort */
if (freeze)
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ else if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void sata_fsl_host_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
@@ -1017,10 +1105,19 @@
return;
}
- if (link->sactive) { /* only true for NCQ commands */
+ /* Read command completed register */
+ qc_active = ioread32(hcr_base + CC);
+
+ VPRINTK("Status of all queues :\n");
+ VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+ qc_active,
+ ioread32(hcr_base + CA),
+ ioread32(hcr_base + CE),
+ ioread32(hcr_base + CQ),
+ ap->qc_active);
+
+ if (qc_active & ap->qc_active) {
int i;
- /* Read command completed register */
- qc_active = ioread32(hcr_base + CC);
/* clear CC bit, this will also complete the interrupt */
iowrite32(qc_active, hcr_base + CC);
@@ -1032,8 +1129,9 @@
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
@@ -1042,19 +1140,21 @@
}
return;
- } else if (ap->qc_active) {
+ } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, link->active_tag);
+ qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
- DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- link->active_tag, ioread32(hcr_base + CC));
+ DPRINTK("completing non-ncq cmd, CC=0x%x\n",
+ ioread32(hcr_base + CC));
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
ioread32(hcr_base + CC));
+ iowrite32(qc_active, hcr_base + CC);
return;
}
}
@@ -1130,9 +1230,6 @@
iowrite32(0x00000FFFF, hcr_base + CE);
iowrite32(0x00000FFFF, hcr_base + DE);
- /* initially assuming no Port multiplier, set CQPMP to 0 */
- iowrite32(0x0, hcr_base + CQPMP);
-
/*
* host controller will be brought on-line, during xx_port_start()
* callback, that should also initiate the OOB, COMINIT sequence
@@ -1154,8 +1251,8 @@
.dma_boundary = ATA_DMA_BOUNDARY,
};
-static const struct ata_port_operations sata_fsl_ops = {
- .inherits = &sata_port_ops,
+static struct ata_port_operations sata_fsl_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
@@ -1168,10 +1265,15 @@
.thaw = sata_fsl_thaw,
.prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
+ .pmp_softreset = sata_fsl_softreset,
+ .error_handler = sata_fsl_error_handler,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
.port_stop = sata_fsl_port_stop,
+
+ .pmp_attach = sata_fsl_pmp_attach,
+ .pmp_detach = sata_fsl_pmp_detach,
};
static const struct ata_port_info sata_fsl_port_info[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index fb81f0c..60391e9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -72,7 +72,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.21"
+#define DRV_VERSION "1.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -122,8 +122,6 @@
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- /* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -226,6 +224,11 @@
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
PHY_MODE2 = 0x330,
SATA_IFCTL_OFS = 0x344,
SATA_TESTCTL_OFS = 0x348,
@@ -356,12 +359,12 @@
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_ERRATA_XX42A0 = (1 << 5),
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
@@ -374,7 +377,7 @@
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
-#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
@@ -652,7 +655,7 @@
.port_ops = &mv_iie_ops,
},
{ /* chip_soc */
- .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
@@ -812,12 +815,7 @@
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crqb_dma & 0xffffffff) | index,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
/*
* initialize response queue
@@ -827,13 +825,7 @@
WARN_ON(pp->crpb_dma & 0xff);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crpb_dma & 0xffffffff) | index,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
@@ -1254,7 +1246,7 @@
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- if (HAS_PCI(ap->host))
+ if (!IS_SOC(hpriv))
cfg |= (1 << 18); /* enab early completion */
if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
@@ -2225,7 +2217,7 @@
* a bogus register value which can indicate HW removal or PCI fault.
*/
if (pending_irqs && main_irq_cause != 0xffffffffU) {
- if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host)))
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
handled = mv_pci_error(host, hpriv->base);
else
handled = mv_host_intr(host, pending_irqs);
@@ -2547,7 +2539,7 @@
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
- u32 m2, tmp;
+ u32 m2, m3;
if (fix_phy_mode2) {
m2 = readl(port_mmio + PHY_MODE2);
@@ -2564,28 +2556,36 @@
udelay(200);
}
- /* who knows what this magic does */
- tmp = readl(port_mmio + PHY_MODE3);
- tmp &= ~0x7F800000;
- tmp |= 0x2A800000;
- writel(tmp, port_mmio + PHY_MODE3);
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
+
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
if (fix_phy_mode4) {
- u32 m4;
-
- m4 = readl(port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + PHY_MODE3);
-
- /* workaround for errata FEr SATA#10 (part 1) */
- m4 = (m4 & ~(1 << 1)) | (1 << 0);
-
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
writel(m4, port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + PHY_MODE3);
}
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
/* Revert values of pre-emphasis and signal amps to the saved ones */
m2 = readl(port_mmio + PHY_MODE2);
@@ -2876,7 +2876,7 @@
void __iomem *mmio = hpriv->base;
u32 reg;
- if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
return 0; /* not PCI-X capable */
reg = readl(mmio + MV_PCI_MODE_OFS);
if ((reg & MV_PCI_MODE_MASK) == 0)
@@ -3003,10 +3003,7 @@
hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
- case 0x0:
- hp_flags |= MV_HP_ERRATA_XX42A0;
- break;
- case 0x1:
+ case 0x2: /* Rev.B0: the first/only public release */
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
@@ -3018,7 +3015,7 @@
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
break;
default:
@@ -3062,12 +3059,12 @@
if (rc)
goto done;
- if (HAS_PCI(host)) {
- hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
- hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
- } else {
+ if (IS_SOC(hpriv)) {
hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
/* global interrupt mask: 0 == mask everything */
@@ -3093,7 +3090,7 @@
mv_port_init(&ap->ioaddr, port_mmio);
#ifdef CONFIG_PCI
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
unsigned int offset = port_mmio - mmio;
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
@@ -3113,7 +3110,7 @@
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
/* Clear any currently outstanding host interrupt conditions */
writelfl(0, mmio + hpriv->irq_cause_ofs);
diff --git a/drivers/atm/fore200e.h b/drivers/atm/fore200e.h
index 183841c..8dd4aa7 100644
--- a/drivers/atm/fore200e.h
+++ b/drivers/atm/fore200e.h
@@ -1,4 +1,3 @@
-/* $Id: fore200e.h,v 1.4 2000/04/14 10:10:34 davem Exp $ */
#ifndef _FORE200E_H
#define _FORE200E_H
diff --git a/drivers/atm/fore200e_mkfirm.c b/drivers/atm/fore200e_mkfirm.c
index 2ebe1a1..520e14b 100644
--- a/drivers/atm/fore200e_mkfirm.c
+++ b/drivers/atm/fore200e_mkfirm.c
@@ -1,6 +1,4 @@
/*
- $Id: fore200e_mkfirm.c,v 1.1 2000/02/21 16:04:32 davem Exp $
-
mkfirm.c: generates a C readable file from a binary firmware image
Christophe Lizzi (lizzi@{csti.fr, cnam.fr}), June 1999.
diff --git a/drivers/atm/he.h b/drivers/atm/he.h
index 1dc2775..fe6cd15a 100644
--- a/drivers/atm/he.h
+++ b/drivers/atm/he.h
@@ -1,5 +1,3 @@
-/* $Id: he.h,v 1.4 2003/05/06 22:48:00 chas Exp $ */
-
/*
he.h
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 28d77b5..3a504e9 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -1,8 +1,4 @@
/*******************************************************************
- * ident "$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
@@ -29,9 +25,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*******************************************************************/
-static char const rcsid[] =
-"$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $";
-
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index 6f2b4a5..e83eaf1 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -1,8 +1,4 @@
/*******************************************************************
- * ident "$Id: idt77252.h,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index 133eefc..b2cd20f 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -1025,7 +1025,8 @@
spinlock_t rx_lock, misc_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
- u32 rx_pkt_ram, rx_tmp_cnt, rx_tmp_jif;
+ u32 rx_pkt_ram, rx_tmp_cnt;
+ unsigned long rx_tmp_jif;
void __iomem *RX_DESC_BASE_ADDR;
u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt;
struct atm_dev *next_board; /* other iphase devices */
diff --git a/drivers/atm/nicstarmac.copyright b/drivers/atm/nicstarmac.copyright
index 2e15b39..180531a 100644
--- a/drivers/atm/nicstarmac.copyright
+++ b/drivers/atm/nicstarmac.copyright
@@ -13,7 +13,7 @@
*
* Modified to work with the IDT7721 nicstar -- AAL5 (tested) only.
*
- * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997 $Revision: 1.1 $ $Date: 1999/08/20 11:00:11 $
+ * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997
*
* Linux driver for the IDT77201 NICStAR PCI ATM controller.
* PHY component is expected to be 155 Mbps S/UNI-Lite or IDT 77155;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index be288b5..422cfca 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -760,6 +760,21 @@
}
/**
+ * dev_set_name - set a device name
+ * @dev: device
+ */
+int dev_set_name(struct device *dev, const char *fmt, ...)
+{
+ va_list vargs;
+
+ va_start(vargs, fmt);
+ vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
+ va_end(vargs);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_set_name);
+
+/**
* device_add - add device to device hierarchy.
* @dev: device.
*
@@ -1084,6 +1099,102 @@
}
/**
+ * device_create_vargs - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
+ * @fmt: string for the device's name
+ * @args: va_list for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create_vargs(struct class *class, struct device *parent,
+ dev_t devt, void *drvdata, const char *fmt,
+ va_list args)
+{
+ struct device *dev = NULL;
+ int retval = -ENODEV;
+
+ if (class == NULL || IS_ERR(class))
+ goto error;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev->devt = devt;
+ dev->class = class;
+ dev->parent = parent;
+ dev->release = device_create_release;
+ dev_set_drvdata(dev, drvdata);
+
+ vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
+ retval = device_register(dev);
+ if (retval)
+ goto error;
+
+ return dev;
+
+error:
+ kfree(dev);
+ return ERR_PTR(retval);
+}
+EXPORT_SYMBOL_GPL(device_create_vargs);
+
+/**
+ * device_create_drvdata - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create_drvdata(struct class *class,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+{
+ va_list vargs;
+ struct device *dev;
+
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, drvdata, fmt, vargs);
+ va_end(vargs);
+ return dev;
+}
+EXPORT_SYMBOL_GPL(device_create_drvdata);
+
+/**
* device_create - creates a device and registers it with sysfs
* @class: pointer to the struct class that this device should be registered to
* @parent: pointer to the parent struct device of this new device, if any
@@ -1107,36 +1218,13 @@
struct device *device_create(struct class *class, struct device *parent,
dev_t devt, const char *fmt, ...)
{
- va_list args;
- struct device *dev = NULL;
- int retval = -ENODEV;
+ va_list vargs;
+ struct device *dev;
- if (class == NULL || IS_ERR(class))
- goto error;
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto error;
- }
-
- dev->devt = devt;
- dev->class = class;
- dev->parent = parent;
- dev->release = device_create_release;
-
- va_start(args, fmt);
- vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
- va_end(args);
- retval = device_register(dev);
- if (retval)
- goto error;
-
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, NULL, fmt, vargs);
+ va_end(vargs);
return dev;
-
-error:
- kfree(dev);
- return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(device_create);
@@ -1218,13 +1306,11 @@
}
#else
if (dev->class) {
- sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
- if (error) {
- dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
- __func__, error);
- }
+ if (error)
+ goto out;
+ sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
}
#endif
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index a196ef7..680cdfc 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -447,6 +447,7 @@
disk->fops = &brd_fops;
disk->private_data = brd;
disk->queue = brd->brd_queue;
+ disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
sprintf(disk->disk_name, "ram%d", i);
set_capacity(disk, rd_size * 2);
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ebfe038..f1c8feb 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -3,7 +3,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 84e064f..dd7ea20 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -260,6 +260,10 @@
if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ /* If disk is read-only in the host, the guest should obey */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
+ set_disk_ro(vblk->disk, 1);
+
/* Host must always specify the capacity. */
vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
&cap, sizeof(cap));
@@ -311,6 +315,7 @@
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ del_gendisk(vblk->disk);
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
@@ -325,7 +330,7 @@
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
- VIRTIO_BLK_F_GEOMETRY,
+ VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
};
static struct virtio_driver virtio_blk = {
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 5245a4a..9d0dfe6 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -6,7 +6,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 9a32169..af211a0 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -34,8 +34,6 @@
struct drm_minor *drm_minor = to_drm_minor(dev);
struct drm_device *drm_dev = drm_minor->dev;
- printk(KERN_ERR "%s\n", __func__);
-
if (drm_dev->driver->suspend)
return drm_dev->driver->suspend(drm_dev, state);
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8d6c208..efd0b4d 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -112,3 +112,12 @@
If unsure, say Y.
+config HW_RANDOM_VIRTIO
+ tristate "VirtIO Random Number Generator support"
+ depends on HW_RANDOM && VIRTIO
+ ---help---
+ This driver provides kernel-side support for the virtual Random Number
+ Generator hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c8b7300..b4940dd 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
new file mode 100644
index 0000000..d0e563e
--- /dev/null
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -0,0 +1,155 @@
+/*
+ * Randomness driver for virtio
+ * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_rng.h>
+
+/* The host will fill any buffer we give it with sweet, sweet randomness. We
+ * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a
+ * time. */
+#define RANDOM_DATA_SIZE 64
+
+static struct virtqueue *vq;
+static u32 *random_data;
+static unsigned int data_left;
+static DECLARE_COMPLETION(have_data);
+
+static void random_recv_done(struct virtqueue *vq)
+{
+ int len;
+
+ /* We never get spurious callbacks. */
+ if (!vq->vq_ops->get_buf(vq, &len))
+ BUG();
+
+ data_left = len / sizeof(random_data[0]);
+ complete(&have_data);
+}
+
+static void register_buffer(void)
+{
+ struct scatterlist sg;
+
+ sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+ /* There should always be room for one buffer. */
+ if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
+/* At least we don't udelay() in a loop like some other drivers. */
+static int virtio_data_present(struct hwrng *rng, int wait)
+{
+ if (data_left)
+ return 1;
+
+ if (!wait)
+ return 0;
+
+ wait_for_completion(&have_data);
+ return 1;
+}
+
+/* virtio_data_present() must have succeeded before this is called. */
+static int virtio_data_read(struct hwrng *rng, u32 *data)
+{
+ BUG_ON(!data_left);
+
+ *data = random_data[--data_left];
+
+ if (!data_left) {
+ init_completion(&have_data);
+ register_buffer();
+ }
+ return sizeof(*data);
+}
+
+static struct hwrng virtio_hwrng = {
+ .name = "virtio",
+ .data_present = virtio_data_present,
+ .data_read = virtio_data_read,
+};
+
+static int virtrng_probe(struct virtio_device *vdev)
+{
+ int err;
+
+ /* We expect a single virtqueue. */
+ vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+ if (IS_ERR(vq))
+ return PTR_ERR(vq);
+
+ err = hwrng_register(&virtio_hwrng);
+ if (err) {
+ vdev->config->del_vq(vq);
+ return err;
+ }
+
+ register_buffer();
+ return 0;
+}
+
+static void virtrng_remove(struct virtio_device *vdev)
+{
+ vdev->config->reset(vdev);
+ hwrng_unregister(&virtio_hwrng);
+ vdev->config->del_vq(vq);
+}
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static struct virtio_driver virtio_rng = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtrng_probe,
+ .remove = __devexit_p(virtrng_remove),
+};
+
+static int __init init(void)
+{
+ int err;
+
+ random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL);
+ if (!random_data)
+ return -ENOMEM;
+
+ err = register_virtio_driver(&virtio_rng);
+ if (err)
+ kfree(random_data);
+ return err;
+}
+
+static void __exit fini(void)
+{
+ kfree(random_data);
+ unregister_virtio_driver(&virtio_rng);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio random number driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
index 6bfe254..939618f 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/char/ip2/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Computone IntelliPort Plus Driver
#
-obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
+obj-$(CONFIG_COMPUTONE) += ip2.o
-ip2-objs := ip2base.o
+ip2-objs := ip2base.o ip2main.o
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 70957ac..c12cf8f 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -346,27 +346,6 @@
}
/******************************************************************************/
-/* Function: init_module() */
-/* Parameters: None */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/* This is a required entry point for an installable module. It simply calls */
-/* the driver initialisation function and returns what it returns. */
-/******************************************************************************/
-#ifdef MODULE
-static int __init
-ip2_init_module(void)
-{
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "Loading module ...\n" );
-#endif
- return 0;
-}
-module_init(ip2_init_module);
-#endif /* MODULE */
-
-/******************************************************************************/
/* Function: cleanup_module() */
/* Parameters: None */
/* Returns: Nothing */
@@ -779,8 +758,6 @@
return err;
}
-EXPORT_SYMBOL(ip2_loadmain);
-
/******************************************************************************/
/* Function: ip2_init_board() */
/* Parameters: Index of board in configuration structure */
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
index 3d3e1c2..65fb848 100644
--- a/drivers/char/viocons.c
+++ b/drivers/char/viocons.c
@@ -7,7 +7,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
*
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index 58aad638..c39ddaf 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -6,7 +6,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7fce038..86f0a24 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -928,13 +928,13 @@
policy->user_policy.policy = policy->policy;
policy->user_policy.governor = policy->governor;
- unlock_policy_rwsem_write(cpu);
-
if (ret) {
dprintk("setting policy failed\n");
goto err_out_unregister;
}
+ unlock_policy_rwsem_write(cpu);
+
kobject_uevent(&policy->kobj, KOBJ_ADD);
module_put(cpufreq_driver->owner);
dprintk("initialization complete\n");
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index ae6cd60..b64c6bc 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -2,6 +2,11 @@
* linux/drivers/cpufreq/freq_table.c
*
* Copyright (C) 2002 - 2003 Dominik Brodowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
*/
#include <linux/kernel.h>
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 762b729..0ec0f43 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -821,10 +821,10 @@
dev_dbg(device->common.dev, "%s\n", __func__);
- src = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ src = kmalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!src)
return -ENOMEM;
- dest = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ dest = kzalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!dest) {
kfree(src);
return -ENOMEM;
@@ -834,8 +834,6 @@
for (i = 0; i < IOP_ADMA_TEST_SIZE; i++)
((u8 *) src)[i] = (u8)i;
- memset(dest, 0, IOP_ADMA_TEST_SIZE);
-
/* Start copy, using first DMA channel */
dma_chan = container_of(device->common.channels.next,
struct dma_chan,
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 065732d..d49361bf 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -20,7 +20,6 @@
#include <linux/of_platform.h>
#include <linux/of_device.h>
-#include <asm/mpc85xx.h>
#include "edac_module.h"
#include "edac_core.h"
#include "mpc85xx_edac.h"
@@ -43,8 +42,6 @@
static u32 orig_l2_err_disable;
static u32 orig_hid1;
-static const char *mpc85xx_ctl_name = "MPC85xx";
-
/************************ MC SYSFS parts ***********************************/
static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci,
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 4a54192..dda1401 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -113,6 +113,11 @@
if (device == NULL)
return -ENODEV;
+ if (fw_device_is_shutdown(device)) {
+ fw_device_put(device);
+ return -ENODEV;
+ }
+
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (client == NULL) {
fw_device_put(device);
@@ -901,6 +906,9 @@
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, (void __user *) arg);
}
@@ -911,6 +919,9 @@
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, compat_ptr(arg));
}
#endif
@@ -922,6 +933,9 @@
unsigned long size;
int page_count, retval;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
/* FIXME: We could support multiple buffers, but we don't. */
if (client->buffer.pages != NULL)
return -EBUSY;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 7f138c6..beaf6b3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -127,7 +127,7 @@
unsigned long flags;
int i;
- if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
+ if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1))
return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
@@ -170,7 +170,7 @@
unsigned id;
int base = chip->base;
- if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
+ if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1))
&& base >= 0) {
status = -EINVAL;
goto fail;
@@ -207,7 +207,7 @@
/* failures here can mean systems won't boot... */
if (status)
pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
- chip->base, chip->base + chip->ngpio,
+ chip->base, chip->base + chip->ngpio - 1,
chip->label ? : "generic");
return status;
}
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7fb5b9d..7f92fdd 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -168,7 +168,7 @@
{
struct mcp23s08 *mcp;
char bank;
- unsigned t;
+ int t;
unsigned mask;
mcp = container_of(chip, struct mcp23s08, chip);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 93f9167..7e40e8a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,7 @@
{ "pca9537", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
+ { "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
/* REVISIT several pca955x parts should work here too */
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index f88714b..47ac1a7 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -1,6 +1,4 @@
/*
- * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $
- *
* (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
* (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
* (c) 2007 Jiri Kosina
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index c3eb3f1..5c52a20 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1,6 +1,4 @@
/*
- * $Id: hid-input.c,v 1.2 2002/04/23 00:59:25 rdamazio Exp $
- *
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
*
@@ -218,8 +216,9 @@
}
}
- if (test_bit(usage->code, hid->pb_pressed_numlock) ||
- test_bit(LED_NUML, input->led)) {
+ if (hid->quirks & HID_QUIRK_APPLE_NUMLOCK_EMULATION && (
+ test_bit(usage->code, hid->pb_pressed_numlock) ||
+ test_bit(LED_NUML, input->led))) {
trans = find_translation(powerbook_numlock_keys, usage->code);
if (trans) {
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index d3f8d91..1df832a 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -325,6 +325,10 @@
#define USB_DEVICE_ID_MGE_UPS 0xffff
#define USB_DEVICE_ID_MGE_UPS1 0x0001
+#define USB_VENDOR_ID_MICROCHIP 0x04d8
+#define USB_DEVICE_ID_PICKIT1 0x0032
+#define USB_DEVICE_ID_PICKIT2 0x0033
+
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
#define USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0 0x009d
@@ -371,6 +375,9 @@
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
+#define USB_VENDOR_ID_SOUNDGRAPH 0x15c2
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038
+
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
@@ -567,6 +574,7 @@
{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
@@ -580,6 +588,9 @@
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT2, HID_QUIRK_IGNORE },
+
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
@@ -611,28 +622,28 @@
{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI, HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 5d9dbb4..3cd46d2 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -1,6 +1,4 @@
/*
- * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Keyboard support
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index df0d96d..703e9d0 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -1,6 +1,4 @@
/*
- * $Id: usbmouse.c,v 1.15 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Mouse support
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4dc76bc..00ff533 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -330,6 +330,20 @@
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
config SENSORS_IBMPEX
tristate "IBM PowerExecutive temperature/power sensors"
select IPMI_SI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3bdb05a..d098677 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
+obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index bab5fd2..88e8965 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -515,6 +515,7 @@
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 6ac5c6f..f9e2ed6 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -111,6 +111,7 @@
void __iomem *amb_mmio;
struct i5k_device_attribute *attrs;
unsigned int num_attrs;
+ unsigned long chipset_id;
};
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
@@ -382,7 +383,8 @@
return res;
}
-static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
+static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data,
+ unsigned long devid)
{
struct pci_dev *pcidev;
u32 val32;
@@ -390,7 +392,7 @@
/* Find AMB register memory space */
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_5000_ERR,
+ devid,
NULL);
if (!pcidev)
return -ENODEV;
@@ -409,6 +411,8 @@
goto out;
}
+ data->chipset_id = devid;
+
res = 0;
out:
pci_dev_put(pcidev);
@@ -441,10 +445,30 @@
return res;
}
+static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
+ unsigned long channel)
+{
+ switch (data->chipset_id) {
+ case PCI_DEVICE_ID_INTEL_5000_ERR:
+ return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
+ case PCI_DEVICE_ID_INTEL_5400_ERR:
+ return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
+ default:
+ BUG();
+ }
+}
+
+static unsigned long chipset_ids[] = {
+ PCI_DEVICE_ID_INTEL_5000_ERR,
+ PCI_DEVICE_ID_INTEL_5400_ERR,
+ 0
+};
+
static int __devinit i5k_amb_probe(struct platform_device *pdev)
{
struct i5k_amb_data *data;
struct resource *reso;
+ int i;
int res = -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -452,19 +476,24 @@
return -ENOMEM;
/* Figure out where the AMB registers live */
- res = i5k_find_amb_registers(data);
+ i = 0;
+ do {
+ res = i5k_find_amb_registers(data, chipset_ids[i]);
+ i++;
+ } while (res && chipset_ids[i]);
+
if (res)
goto err;
/* Copy the DIMM presence map for the first two channels */
res = i5k_channel_probe(&data->amb_present[0],
- PCI_DEVICE_ID_INTEL_5000_FBD0);
+ i5k_channel_pci_id(data, 0));
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
i5k_channel_probe(&data->amb_present[2],
- PCI_DEVICE_ID_INTEL_5000_FBD1);
+ i5k_channel_pci_id(data, 1));
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
new file mode 100644
index 0000000..c9416e6
--- /dev/null
+++ b/drivers/hwmon/ibmaem.c
@@ -0,0 +1,1111 @@
+/*
+ * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
+ * and capping functionality.
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ipmi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/math64.h>
+#include <linux/time.h>
+
+#define REFRESH_INTERVAL (HZ)
+#define IPMI_TIMEOUT (30 * HZ)
+#define DRVNAME "aem"
+
+#define AEM_NETFN 0x2E
+
+#define AEM_FIND_FW_CMD 0x80
+#define AEM_ELEMENT_CMD 0x81
+#define AEM_FW_INSTANCE_CMD 0x82
+
+#define AEM_READ_ELEMENT_CFG 0x80
+#define AEM_READ_BUFFER 0x81
+#define AEM_READ_REGISTER 0x82
+#define AEM_WRITE_REGISTER 0x83
+#define AEM_SET_REG_MASK 0x84
+#define AEM_CLEAR_REG_MASK 0x85
+#define AEM_READ_ELEMENT_CFG2 0x86
+
+#define AEM_CONTROL_ELEMENT 0
+#define AEM_ENERGY_ELEMENT 1
+#define AEM_CLOCK_ELEMENT 4
+#define AEM_POWER_CAP_ELEMENT 7
+#define AEM_EXHAUST_ELEMENT 9
+#define AEM_POWER_ELEMENT 10
+
+#define AEM_MODULE_TYPE_ID 0x0001
+
+#define AEM2_NUM_ENERGY_REGS 2
+#define AEM2_NUM_PCAP_REGS 6
+#define AEM2_NUM_TEMP_REGS 2
+#define AEM2_NUM_SENSORS 14
+
+#define AEM1_NUM_ENERGY_REGS 1
+#define AEM1_NUM_SENSORS 3
+
+/* AEM 2.x has more energy registers */
+#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS
+/* AEM 2.x needs more sensor files */
+#define AEM_NUM_SENSORS AEM2_NUM_SENSORS
+
+#define POWER_CAP 0
+#define POWER_CAP_MAX_HOTPLUG 1
+#define POWER_CAP_MAX 2
+#define POWER_CAP_MIN_WARNING 3
+#define POWER_CAP_MIN 4
+#define POWER_AUX 5
+
+#define AEM_DEFAULT_POWER_INTERVAL 1000
+#define AEM_MIN_POWER_INTERVAL 200
+#define UJ_PER_MJ 1000L
+
+static DEFINE_IDR(aem_idr);
+static DEFINE_SPINLOCK(aem_idr_lock);
+
+static struct device_driver aem_driver = {
+ .name = DRVNAME,
+ .bus = &platform_bus_type,
+};
+
+struct aem_ipmi_data {
+ struct completion read_complete;
+ struct ipmi_addr address;
+ ipmi_user_t user;
+ int interface;
+
+ struct kernel_ipmi_msg tx_message;
+ long tx_msgid;
+
+ void *rx_msg_data;
+ unsigned short rx_msg_len;
+ unsigned char rx_result;
+ int rx_recv_type;
+
+ struct device *bmc_device;
+};
+
+struct aem_ro_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ int index;
+};
+
+struct aem_rw_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ ssize_t (*set)(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count);
+ int index;
+};
+
+struct aem_data {
+ struct list_head list;
+
+ struct device *hwmon_dev;
+ struct platform_device *pdev;
+ struct mutex lock;
+ char valid;
+ unsigned long last_updated; /* In jiffies */
+ u8 ver_major;
+ u8 ver_minor;
+ u8 module_handle;
+ int id;
+ struct aem_ipmi_data ipmi;
+
+ /* Function to update sensors */
+ void (*update)(struct aem_data *data);
+
+ /*
+ * AEM 1.x sensors:
+ * Available sensors:
+ * Energy meter
+ * Power meter
+ *
+ * AEM 2.x sensors:
+ * Two energy meters
+ * Two power meters
+ * Two temperature sensors
+ * Six power cap registers
+ */
+
+ /* sysfs attrs */
+ struct sensor_device_attribute sensors[AEM_NUM_SENSORS];
+
+ /* energy use in mJ */
+ u64 energy[AEM_NUM_ENERGY_REGS];
+
+ /* power sampling interval in ms */
+ unsigned long power_period[AEM_NUM_ENERGY_REGS];
+
+ /* Everything past here is for AEM2 only */
+
+ /* power caps in dW */
+ u16 pcap[AEM2_NUM_PCAP_REGS];
+
+ /* exhaust temperature in C */
+ u8 temp[AEM2_NUM_TEMP_REGS];
+};
+
+/* Data structures returned by the AEM firmware */
+struct aem_iana_id {
+ u8 bytes[3];
+};
+static struct aem_iana_id system_x_id = {
+ .bytes = {0x4D, 0x4F, 0x00}
+};
+
+/* These are used to find AEM1 instances */
+struct aem_find_firmware_req {
+ struct aem_iana_id id;
+ u8 rsvd;
+ __be16 index;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_firmware_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+} __packed;
+
+/* These are used to find AEM2 instances */
+struct aem_find_instance_req {
+ struct aem_iana_id id;
+ u8 instance_number;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_instance_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+ u8 major;
+ u8 minor;
+ u8 module_handle;
+ u16 record_id;
+} __packed;
+
+/* These are used to query sensors */
+struct aem_read_sensor_req {
+ struct aem_iana_id id;
+ u8 module_handle;
+ u8 element;
+ u8 subcommand;
+ u8 reg;
+ u8 rx_buf_size;
+} __packed;
+
+struct aem_read_sensor_resp {
+ struct aem_iana_id id;
+ u8 bytes[0];
+} __packed;
+
+/* Data structures to talk to the IPMI layer */
+struct aem_driver_data {
+ struct list_head aem_devices;
+ struct ipmi_smi_watcher bmc_events;
+ struct ipmi_user_hndl ipmi_hndlrs;
+};
+
+static void aem_register_bmc(int iface, struct device *dev);
+static void aem_bmc_gone(int iface);
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+
+static void aem_remove_sensors(struct aem_data *data);
+static int aem_init_aem1(struct aem_ipmi_data *probe);
+static int aem_init_aem2(struct aem_ipmi_data *probe);
+static int aem1_find_sensors(struct aem_data *data);
+static int aem2_find_sensors(struct aem_data *data);
+static void update_aem1_sensors(struct aem_data *data);
+static void update_aem2_sensors(struct aem_data *data);
+
+static struct aem_driver_data driver_data = {
+ .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices),
+ .bmc_events = {
+ .owner = THIS_MODULE,
+ .new_smi = aem_register_bmc,
+ .smi_gone = aem_bmc_gone,
+ },
+ .ipmi_hndlrs = {
+ .ipmi_recv_hndl = aem_msg_handler,
+ },
+};
+
+/* Functions to talk to the IPMI layer */
+
+/* Initialize IPMI address, message buffers and user data */
+static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface,
+ struct device *bmc)
+{
+ int err;
+
+ init_completion(&data->read_complete);
+ data->bmc_device = bmc;
+
+ /* Initialize IPMI address */
+ data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ data->address.channel = IPMI_BMC_CHANNEL;
+ data->address.data[0] = 0;
+ data->interface = iface;
+
+ /* Initialize message buffers */
+ data->tx_msgid = 0;
+ data->tx_message.netfn = AEM_NETFN;
+
+ /* Create IPMI messaging interface user */
+ err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
+ data, &data->user);
+ if (err < 0) {
+ dev_err(bmc, "Unable to register user with IPMI "
+ "interface %d\n", data->interface);
+ return -EACCES;
+ }
+
+ return 0;
+}
+
+/* Send an IPMI command */
+static int aem_send_message(struct aem_ipmi_data *data)
+{
+ int err;
+
+ err = ipmi_validate_addr(&data->address, sizeof(data->address));
+ if (err)
+ goto out;
+
+ data->tx_msgid++;
+ err = ipmi_request_settime(data->user, &data->address, data->tx_msgid,
+ &data->tx_message, data, 0, 0, 0);
+ if (err)
+ goto out1;
+
+ return 0;
+out1:
+ dev_err(data->bmc_device, "request_settime=%x\n", err);
+ return err;
+out:
+ dev_err(data->bmc_device, "validate_addr=%x\n", err);
+ return err;
+}
+
+/* Dispatch IPMI messages to callers */
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+ unsigned short rx_len;
+ struct aem_ipmi_data *data = user_msg_data;
+
+ if (msg->msgid != data->tx_msgid) {
+ dev_err(data->bmc_device, "Mismatch between received msgid "
+ "(%02x) and transmitted msgid (%02x)!\n",
+ (int)msg->msgid,
+ (int)data->tx_msgid);
+ ipmi_free_recv_msg(msg);
+ return;
+ }
+
+ data->rx_recv_type = msg->recv_type;
+ if (msg->msg.data_len > 0)
+ data->rx_result = msg->msg.data[0];
+ else
+ data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE;
+
+ if (msg->msg.data_len > 1) {
+ rx_len = msg->msg.data_len - 1;
+ if (data->rx_msg_len < rx_len)
+ rx_len = data->rx_msg_len;
+ data->rx_msg_len = rx_len;
+ memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len);
+ } else
+ data->rx_msg_len = 0;
+
+ ipmi_free_recv_msg(msg);
+ complete(&data->read_complete);
+}
+
+/* ID functions */
+
+/* Obtain an id */
+static int aem_idr_get(int *id)
+{
+ int i, err;
+
+again:
+ if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL)))
+ return -ENOMEM;
+
+ spin_lock(&aem_idr_lock);
+ err = idr_get_new(&aem_idr, NULL, &i);
+ spin_unlock(&aem_idr_lock);
+
+ if (unlikely(err == -EAGAIN))
+ goto again;
+ else if (unlikely(err))
+ return err;
+
+ *id = i & MAX_ID_MASK;
+ return 0;
+}
+
+/* Release an object ID */
+static void aem_idr_put(int id)
+{
+ spin_lock(&aem_idr_lock);
+ idr_remove(&aem_idr, id);
+ spin_unlock(&aem_idr_lock);
+}
+
+/* Sensor support functions */
+
+/* Read a sensor value */
+static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
+ void *buf, size_t size)
+{
+ int rs_size, res;
+ struct aem_read_sensor_req rs_req;
+ struct aem_read_sensor_resp *rs_resp;
+ struct aem_ipmi_data *ipmi = &data->ipmi;
+
+ /* AEM registers are 1, 2, 4 or 8 bytes */
+ switch (size) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rs_req.id = system_x_id;
+ rs_req.module_handle = data->module_handle;
+ rs_req.element = elt;
+ rs_req.subcommand = AEM_READ_REGISTER;
+ rs_req.reg = reg;
+ rs_req.rx_buf_size = size;
+
+ ipmi->tx_message.cmd = AEM_ELEMENT_CMD;
+ ipmi->tx_message.data = (char *)&rs_req;
+ ipmi->tx_message.data_len = sizeof(rs_req);
+
+ rs_size = sizeof(*rs_resp) + size;
+ rs_resp = kzalloc(rs_size, GFP_KERNEL);
+ if (!rs_resp)
+ return -ENOMEM;
+
+ ipmi->rx_msg_data = rs_resp;
+ ipmi->rx_msg_len = rs_size;
+
+ aem_send_message(ipmi);
+
+ res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (ipmi->rx_result || ipmi->rx_msg_len != rs_size ||
+ memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) {
+ kfree(rs_resp);
+ return -ENOENT;
+ }
+
+ switch (size) {
+ case 1: {
+ u8 *x = buf;
+ *x = rs_resp->bytes[0];
+ break;
+ }
+ case 2: {
+ u16 *x = buf;
+ *x = be16_to_cpup((__be16 *)rs_resp->bytes);
+ break;
+ }
+ case 4: {
+ u32 *x = buf;
+ *x = be32_to_cpup((__be32 *)rs_resp->bytes);
+ break;
+ }
+ case 8: {
+ u64 *x = buf;
+ *x = be64_to_cpup((__be64 *)rs_resp->bytes);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* Update AEM energy registers */
+static void update_aem_energy(struct aem_data *data)
+{
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+ if (data->ver_major < 2)
+ return;
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+}
+
+/* Update all AEM1 sensors */
+static void update_aem1_sensors(struct aem_data *data)
+{
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Update all AEM2 sensors */
+static void update_aem2_sensors(struct aem_data *data)
+{
+ int i;
+
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1);
+
+ for (i = POWER_CAP; i <= POWER_AUX; i++)
+ aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i,
+ &data->pcap[i], 2);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Delete an AEM instance */
+static void aem_delete(struct aem_data *data)
+{
+ list_del(&data->list);
+ aem_remove_sensors(data);
+ hwmon_device_unregister(data->hwmon_dev);
+ ipmi_destroy_user(data->ipmi.user);
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+ aem_idr_put(data->id);
+ kfree(data);
+}
+
+/* Probe functions for AEM1 devices */
+
+/* Retrieve version and module handle for an AEM1 instance */
+static int aem_find_aem1_count(struct aem_ipmi_data *data)
+{
+ int res;
+ struct aem_find_firmware_req ff_req;
+ struct aem_find_firmware_resp ff_resp;
+
+ ff_req.id = system_x_id;
+ ff_req.index = 0;
+ ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FIND_FW_CMD;
+ data->tx_message.data = (char *)&ff_req;
+ data->tx_message.data_len = sizeof(ff_req);
+
+ data->rx_msg_data = &ff_resp;
+ data->rx_msg_len = sizeof(ff_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) ||
+ memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return ff_resp.num_instances;
+}
+
+/* Find and initialize one AEM1 instance */
+static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = 1;
+ data->ver_minor = 0;
+ data->module_handle = module_handle;
+ for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem1_sensors;
+
+ /* Find sensors */
+ if (aem1_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM1 instances */
+static int aem_init_aem1(struct aem_ipmi_data *probe)
+{
+ int num, i, err;
+
+ num = aem_find_aem1_count(probe);
+ for (i = 0; i < num; i++) {
+ err = aem_init_aem1_inst(probe, i);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM1 0x%X\n",
+ err, i);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* Probe functions for AEM2 devices */
+
+/* Retrieve version and module handle for an AEM2 instance */
+static int aem_find_aem2(struct aem_ipmi_data *data,
+ struct aem_find_instance_resp *fi_resp,
+ int instance_num)
+{
+ int res;
+ struct aem_find_instance_req fi_req;
+
+ fi_req.id = system_x_id;
+ fi_req.instance_number = instance_num;
+ fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FW_INSTANCE_CMD;
+ data->tx_message.data = (char *)&fi_req;
+ data->tx_message.data_len = sizeof(fi_req);
+
+ data->rx_msg_data = fi_resp;
+ data->rx_msg_len = sizeof(*fi_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
+ memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return 0;
+}
+
+/* Find and initialize one AEM2 instance */
+static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
+ struct aem_find_instance_resp *fi_resp)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = fi_resp->major;
+ data->ver_minor = fi_resp->minor;
+ data->module_handle = fi_resp->module_handle;
+ for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem2_sensors;
+
+ /* Find sensors */
+ if (aem2_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM2 instances */
+static int aem_init_aem2(struct aem_ipmi_data *probe)
+{
+ struct aem_find_instance_resp fi_resp;
+ int err;
+ int i = 0;
+
+ while (!aem_find_aem2(probe, &fi_resp, i)) {
+ if (fi_resp.major != 2) {
+ dev_err(probe->bmc_device, "Unknown AEM v%d; please "
+ "report this to the maintainer.\n",
+ fi_resp.major);
+ i++;
+ continue;
+ }
+ err = aem_init_aem2_inst(probe, &fi_resp);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM2 0x%X\n",
+ err, fi_resp.module_handle);
+ return err;
+ }
+ i++;
+ }
+
+ return 0;
+}
+
+/* Probe a BMC for AEM firmware instances */
+static void aem_register_bmc(int iface, struct device *dev)
+{
+ struct aem_ipmi_data probe;
+
+ if (aem_init_ipmi_data(&probe, iface, dev))
+ return;
+
+ /* Ignore probe errors; they won't cause problems */
+ aem_init_aem1(&probe);
+ aem_init_aem2(&probe);
+
+ ipmi_destroy_user(probe.user);
+}
+
+/* Handle BMC deletion */
+static void aem_bmc_gone(int iface)
+{
+ struct aem_data *p1, *next1;
+
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ if (p1->ipmi.interface == iface)
+ aem_delete(p1);
+}
+
+/* sysfs support functions */
+
+/* AEM device name */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major);
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+/* AEM device version */
+static ssize_t show_version(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor);
+}
+static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0);
+
+/* Display power use */
+static ssize_t aem_show_power(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *data = dev_get_drvdata(dev);
+ u64 before, after, delta, time;
+ signed long leftover;
+ struct timespec b, a;
+
+ mutex_lock(&data->lock);
+ update_aem_energy(data);
+ getnstimeofday(&b);
+ before = data->energy[attr->index];
+
+ leftover = schedule_timeout_interruptible(
+ msecs_to_jiffies(data->power_period[attr->index])
+ );
+ if (leftover) {
+ mutex_unlock(&data->lock);
+ return 0;
+ }
+
+ update_aem_energy(data);
+ getnstimeofday(&a);
+ after = data->energy[attr->index];
+ mutex_unlock(&data->lock);
+
+ time = timespec_to_ns(&a) - timespec_to_ns(&b);
+ delta = (after - before) * UJ_PER_MJ;
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time));
+}
+
+/* Display energy use */
+static ssize_t aem_show_energy(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)a->energy[attr->index] * 1000);
+}
+
+/* Display power interval registers */
+static ssize_t aem_show_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%lu\n", a->power_period[attr->index]);
+}
+
+/* Set power interval registers */
+static ssize_t aem_set_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ unsigned long temp;
+ int res;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ if (temp < AEM_MIN_POWER_INTERVAL)
+ return -EINVAL;
+
+ mutex_lock(&a->lock);
+ a->power_period[attr->index] = temp;
+ mutex_unlock(&a->lock);
+
+ return count;
+}
+
+/* Discover sensors on an AEM device */
+static int aem_register_sensors(struct aem_data *data,
+ struct aem_ro_sensor_template *ro,
+ struct aem_rw_sensor_template *rw)
+{
+ struct device *dev = &data->pdev->dev;
+ struct sensor_device_attribute *sensors = data->sensors;
+ int err;
+
+ /* Set up read-only sensors */
+ while (ro->label) {
+ sensors->dev_attr.attr.name = ro->label;
+ sensors->dev_attr.attr.mode = S_IRUGO;
+ sensors->dev_attr.show = ro->show;
+ sensors->index = ro->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ ro++;
+ }
+
+ /* Set up read-write sensors */
+ while (rw->label) {
+ sensors->dev_attr.attr.name = rw->label;
+ sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
+ sensors->dev_attr.show = rw->show;
+ sensors->dev_attr.store = rw->set;
+ sensors->index = rw->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ rw++;
+ }
+
+ err = device_create_file(dev, &sensor_dev_attr_name.dev_attr);
+ if (err)
+ goto error;
+ err = device_create_file(dev, &sensor_dev_attr_version.dev_attr);
+ return err;
+
+error:
+ aem_remove_sensors(data);
+ return err;
+}
+
+/* sysfs support functions for AEM2 sensors */
+
+/* Display temperature use */
+static ssize_t aem2_show_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->temp[attr->index] * 1000);
+}
+
+/* Display power-capping registers */
+static ssize_t aem2_show_pcap_value(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000);
+}
+
+/* Remove sensors attached to an AEM device */
+static void aem_remove_sensors(struct aem_data *data)
+{
+ int i;
+
+ for (i = 0; i < AEM_NUM_SENSORS; i++) {
+ if (!data->sensors[i].dev_attr.attr.name)
+ continue;
+ device_remove_file(&data->pdev->dev,
+ &data->sensors[i].dev_attr);
+ }
+
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_name.dev_attr);
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_version.dev_attr);
+}
+
+/* Sensor probe functions */
+
+/* Description of AEM1 sensors */
+static struct aem_ro_sensor_template aem1_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"power1_average", aem_show_power, 0},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem1_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{NULL, NULL, NULL, 0},
+};
+
+/* Description of AEM2 sensors */
+static struct aem_ro_sensor_template aem2_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"energy2_input", aem_show_energy, 1},
+{"power1_average", aem_show_power, 0},
+{"power2_average", aem_show_power, 1},
+{"temp1_input", aem2_show_temp, 0},
+{"temp2_input", aem2_show_temp, 1},
+
+{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG},
+{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX},
+{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING},
+{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN},
+
+{"power3_average", aem2_show_pcap_value, POWER_AUX},
+{"power_cap", aem2_show_pcap_value, POWER_CAP},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem2_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1},
+{NULL, NULL, NULL, 0},
+};
+
+/* Set up AEM1 sensor attrs */
+static int aem1_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors);
+}
+
+/* Set up AEM2 sensor attrs */
+static int aem2_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors);
+}
+
+/* Module init/exit routines */
+
+static int __init aem_init(void)
+{
+ int res;
+
+ res = driver_register(&aem_driver);
+ if (res) {
+ printk(KERN_ERR "Can't register aem driver\n");
+ return res;
+ }
+
+ res = ipmi_smi_watcher_register(&driver_data.bmc_events);
+ if (res)
+ goto ipmi_reg_err;
+ return 0;
+
+ipmi_reg_err:
+ driver_unregister(&aem_driver);
+ return res;
+
+}
+
+static void __exit aem_exit(void)
+{
+ struct aem_data *p1, *next1;
+
+ ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+ driver_unregister(&aem_driver);
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ aem_delete(p1);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(aem_init);
+module_exit(aem_exit);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 34b0d4f..655ec7e 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -648,13 +648,12 @@
get_device(&hwif->gendev);
- hwif->portdev = device_create(ide_port_class, &hwif->gendev,
- MKDEV(0, 0), hwif->name);
+ hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
+ MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
ret = PTR_ERR(hwif->portdev);
device_unregister(&hwif->gendev);
}
- dev_set_drvdata(hwif->portdev, hwif);
out:
return ret;
}
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 16b9d0a..a5ceff2 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1539,15 +1539,13 @@
static void sbp2_create_command_orb(struct sbp2_lu *lu,
struct sbp2_command_info *cmd,
- unchar *scsi_cmd,
- unsigned int scsi_use_sg,
- unsigned int scsi_request_bufflen,
- struct scatterlist *sg,
- enum dma_data_direction dma_dir)
+ struct scsi_cmnd *SCpnt)
{
struct sbp2_fwhost_info *hi = lu->hi;
struct sbp2_command_orb *orb = &cmd->command_orb;
u32 orb_direction;
+ unsigned int scsi_request_bufflen = scsi_bufflen(SCpnt);
+ enum dma_data_direction dma_dir = SCpnt->sc_data_direction;
/*
* Set-up our command ORB.
@@ -1580,13 +1578,14 @@
orb->data_descriptor_lo = 0x0;
orb->misc |= ORB_SET_DIRECTION(1);
} else
- sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sg,
+ sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_sg_count(SCpnt),
+ scsi_sglist(SCpnt),
orb_direction, dma_dir);
sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
- memset(orb->cdb, 0, 12);
- memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
+ memset(orb->cdb, 0, sizeof(orb->cdb));
+ memcpy(orb->cdb, SCpnt->cmnd, SCpnt->cmd_len);
}
static void sbp2_link_orb_command(struct sbp2_lu *lu,
@@ -1669,16 +1668,13 @@
static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
struct sbp2_command_info *cmd;
cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
if (!cmd)
return -EIO;
- sbp2_create_command_orb(lu, cmd, scsi_cmd, scsi_sg_count(SCpnt),
- scsi_bufflen(SCpnt), scsi_sglist(SCpnt),
- SCpnt->sc_data_direction);
+ sbp2_create_command_orb(lu, cmd, SCpnt);
sbp2_link_orb_command(lu, cmd);
return 0;
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index fbe16d5..1adf2ef 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -747,7 +747,9 @@
break;
case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED:
kmem_cache_free(ib_mad_cache, mad_priv);
- break;
+ kfree(local);
+ ret = 1;
+ goto out;
case IB_MAD_RESULT_SUCCESS:
/* Treat like an incoming receive MAD */
port_priv = ib_get_mad_port(mad_agent_priv->agent.device,
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 3aa2db5..840ede9 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -1005,8 +1005,9 @@
if (cdev_add(port->cdev, base_dev + port->dev_num, 1))
goto err_cdev;
- port->dev = device_create(umad_class, device->dma_device,
- port->cdev->dev, "umad%d", port->dev_num);
+ port->dev = device_create_drvdata(umad_class, device->dma_device,
+ port->cdev->dev, port,
+ "umad%d", port->dev_num);
if (IS_ERR(port->dev))
goto err_cdev;
@@ -1024,15 +1025,12 @@
if (cdev_add(port->sm_cdev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1))
goto err_sm_cdev;
- port->sm_dev = device_create(umad_class, device->dma_device,
- port->sm_cdev->dev,
- "issm%d", port->dev_num);
+ port->sm_dev = device_create_drvdata(umad_class, device->dma_device,
+ port->sm_cdev->dev, port,
+ "issm%d", port->dev_num);
if (IS_ERR(port->sm_dev))
goto err_sm_cdev;
- dev_set_drvdata(port->dev, port);
- dev_set_drvdata(port->sm_dev, port);
-
if (device_create_file(port->sm_dev, &dev_attr_ibdev))
goto err_sm_dev;
if (device_create_file(port->sm_dev, &dev_attr_port))
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index cc1afa2..f806da1 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -755,14 +755,15 @@
if (cdev_add(uverbs_dev->cdev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1))
goto err_cdev;
- uverbs_dev->dev = device_create(uverbs_class, device->dma_device,
- uverbs_dev->cdev->dev,
- "uverbs%d", uverbs_dev->devnum);
+ uverbs_dev->dev = device_create_drvdata(uverbs_class,
+ device->dma_device,
+ uverbs_dev->cdev->dev,
+ uverbs_dev,
+ "uverbs%d",
+ uverbs_dev->devnum);
if (IS_ERR(uverbs_dev->dev))
goto err_cdev;
- dev_set_drvdata(uverbs_dev->dev, uverbs_dev);
-
if (device_create_file(uverbs_dev->dev, &dev_attr_ibdev))
goto err_class;
if (device_create_file(uverbs_dev->dev, &dev_attr_abi_version))
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 79dbe5b..9926137 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -229,7 +229,7 @@
struct ib_send_wr **bad_wr)
{
int err = 0;
- u8 t3_wr_flit_cnt;
+ u8 uninitialized_var(t3_wr_flit_cnt);
enum t3_wr_opcode t3_wr_opcode = 0;
enum t3_wr_flags t3_wr_flags;
struct iwch_qp *qhp;
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 3697449..0a8c1b8 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -345,7 +345,7 @@
* state change
*/
if (jiffies > dd->ipath_sdma_abort_jiffies) {
- ipath_dbg("looping with status 0x%016llx\n",
+ ipath_dbg("looping with status 0x%08lx\n",
dd->ipath_sdma_status);
dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
}
@@ -615,7 +615,7 @@
}
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
if (!needed) {
- ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n",
+ ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
dd->ipath_sdma_status);
goto bail;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c
index 7fd18e8..0596ec1 100644
--- a/drivers/infiniband/hw/ipath/ipath_uc.c
+++ b/drivers/infiniband/hw/ipath/ipath_uc.c
@@ -407,12 +407,11 @@
dev->n_pkt_drops++;
goto done;
}
- /* XXX Need to free SGEs */
+ wc.opcode = IB_WC_RECV;
last_imm:
ipath_copy_sge(&qp->r_sge, data, tlen);
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
@@ -514,6 +513,7 @@
goto done;
}
wc.byte_len = qp->r_len;
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
goto last_imm;
case OP(RDMA_WRITE_LAST):
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 8e02ecf..a80df22 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -333,6 +333,9 @@
cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
send_wqe_overhead(type, qp->flags);
+ if (s > dev->dev->caps.max_sq_desc_sz)
+ return -EINVAL;
+
/*
* Hermon supports shrinking WQEs, such that a single work
* request can include multiple units of 1 << wqe_shift. This
@@ -372,9 +375,6 @@
qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s));
for (;;) {
- if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz)
- return -EINVAL;
-
qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift);
/*
@@ -395,7 +395,8 @@
++qp->sq.wqe_shift;
}
- qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
+ qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz,
+ (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) -
send_wqe_overhead(type, qp->flags)) /
sizeof (struct mlx4_wqe_data_seg);
@@ -411,7 +412,9 @@
cap->max_send_wr = qp->sq.max_post =
(qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr;
- cap->max_send_sge = qp->sq.max_gs;
+ cap->max_send_sge = min(qp->sq.max_gs,
+ min(dev->dev->caps.max_sq_sg,
+ dev->dev->caps.max_rq_sg));
/* We don't support inline sends for kernel QPs (yet) */
cap->max_inline_data = 0;
@@ -1457,7 +1460,7 @@
unsigned ind;
int uninitialized_var(stamp);
int uninitialized_var(size);
- unsigned seglen;
+ unsigned uninitialized_var(seglen);
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 9ebadd6..200cf13 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -45,6 +45,7 @@
#include "mthca_cmd.h"
#include "mthca_profile.h"
#include "mthca_memfree.h"
+#include "mthca_wqe.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
@@ -200,7 +201,18 @@
mdev->limits.gid_table_len = dev_lim->max_gids;
mdev->limits.pkey_table_len = dev_lim->max_pkeys;
mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
- mdev->limits.max_sg = dev_lim->max_sg;
+ /*
+ * Need to allow for worst case send WQE overhead and check
+ * whether max_desc_sz imposes a lower limit than max_sg; UD
+ * send has the biggest overhead.
+ */
+ mdev->limits.max_sg = min_t(int, dev_lim->max_sg,
+ (dev_lim->max_desc_sz -
+ sizeof (struct mthca_next_seg) -
+ (mthca_is_memfree(mdev) ?
+ sizeof (struct mthca_arbel_ud_seg) :
+ sizeof (struct mthca_tavor_ud_seg))) /
+ sizeof (struct mthca_data_seg));
mdev->limits.max_wqes = dev_lim->max_qp_sz;
mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp;
mdev->limits.reserved_qps = dev_lim->reserved_qps;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index d00a2c1..3f663fb 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -194,7 +194,13 @@
/* Set the cached Q_Key before we attach if it's the broadcast group */
if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid))) {
+ spin_lock_irq(&priv->lock);
+ if (!priv->broadcast) {
+ spin_unlock_irq(&priv->lock);
+ return -EAGAIN;
+ }
priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
+ spin_unlock_irq(&priv->lock);
priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
}
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index a293e8b..8a77bfc 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -183,4 +183,4 @@
MODULE_AUTHOR("Nicolas Bellido Y Ortega");
MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc..af58a6f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@
static void atkbd_cleanup(struct serio *serio)
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
}
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 29fbec6..1aa46ae 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -412,5 +412,5 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Corgi Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:corgi-keyboard");
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index 9387da3..781fc61 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -275,5 +275,5 @@
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:jornada680_kbd");
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index a1164a0..ce650af 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -29,7 +29,7 @@
MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
static unsigned short jornada_std_keymap[128] = { /* ROW */
0, KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, /* #1 */
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 3dea0c5..45767e7 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -136,6 +136,9 @@
set_bit(code, input_dev->keybit);
}
+ for (i = 0; i < pdata->direct_key_num; i++)
+ set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
keypad->rotary_up_key[0] = pdata->rotary0_up_key;
keypad->rotary_up_key[1] = pdata->rotary1_up_key;
keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -143,17 +146,21 @@
keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
- if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
- set_bit(pdata->rotary0_up_key, input_dev->keybit);
- set_bit(pdata->rotary0_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary0) {
+ if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+ set_bit(pdata->rotary0_up_key, input_dev->keybit);
+ set_bit(pdata->rotary0_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ }
- if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
- set_bit(pdata->rotary1_up_key, input_dev->keybit);
- set_bit(pdata->rotary1_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary1) {
+ if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+ set_bit(pdata->rotary1_up_key, input_dev->keybit);
+ set_bit(pdata->rotary1_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ }
}
static inline unsigned int lookup_matrix_keycode(
@@ -484,8 +491,13 @@
keypad->input_dev = input_dev;
input_set_drvdata(input_dev, keypad);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
- BIT_MASK(EV_REL);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ if ((keypad->pdata->enable_rotary0 &&
+ keypad->pdata->rotary0_rel_code) ||
+ (keypad->pdata->enable_rotary1 &&
+ keypad->pdata->rotary1_rel_code)) {
+ input_dev->evbit[0] |= BIT_MASK(EV_REL);
+ }
pxa27x_keypad_build_keycode(keypad);
platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 61e401b..1aa3718 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -494,5 +494,5 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Spitz Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spitz-keyboard");
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c..d82f7f7 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/input-polldev.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ece9f5..9aafa96 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -331,6 +331,13 @@
},
},
{
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+ {
.ident = "Acer TravelMate 2490",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cf..592ff55 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@
#undef DELAY
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+ char param = 0x90;
+ int error;
+
+ error = i8042_command(¶m, 0x1059);
+ if (error)
+ printk(KERN_WARNING
+ "Failed to enable DRITEK extension: %d\n",
+ error);
+}
+#endif
+
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
@@ -942,6 +956,12 @@
return -EIO;
}
+
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
@@ -1160,6 +1180,11 @@
if (error)
return error;
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1196,6 @@
if (error)
goto out_fail;
}
-#ifdef CONFIG_X86
- if (i8042_dritek) {
- char param = 0x90;
- error = i8042_command(¶m, 0x1059);
- if (error)
- goto out_fail;
- }
-#endif
/*
* Ok, everything is ready, let's register all serio ports
*/
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661..1e748e4 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@
struct gtco *gtco;
struct input_dev *input_dev;
struct hid_descriptor *hid_desc;
- char *report = NULL;
+ char *report;
int result = 0, retry;
int error;
struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@
le16_to_cpu(hid_desc->wDescriptorLength),
5000); /* 5 secs */
- if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+ dbg("usb_control_msg result: %d", result);
+ if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+ parse_hid_report_descriptor(gtco, report, result);
break;
+ }
}
+ kfree(report);
+
/* If we didn't get the report, fail */
- dbg("usb_control_msg result: :%d", result);
if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
err("Failed to get HID Report Descriptor of size: %d",
hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@
goto err_free_urb;
}
- /* Now we parse the report */
- parse_hid_report_descriptor(gtco, report, result);
-
- /* Now we delete it */
- kfree(report);
-
/* Create a device file node */
usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@
usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
gtco->buffer, gtco->buf_dma);
err_free_devs:
- kfree(report);
input_free_device(input_dev);
kfree(gtco);
return error;
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 7422421..1aca108 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -24,7 +24,7 @@
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
struct jornada_ts {
struct input_dev *dev;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@
MODULE_PARM_DESC(delay, "Set adc sample delay.");
/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
* Set adc mask function.
*
* Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@
64000 / rpu);
}
+ /* Five wire panel? */
+ if (five_wire) {
+ dig3 |= WM9713_45W;
+ dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+ if (pil) {
+ dev_warn(wm->dev,
+ "Pressure measurement not supported in 5 "
+ "wire mode, disabling\n");
+ pil = 0;
+ }
+ }
+
/* touchpanel pressure */
if (pil == 2) {
dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@
goto alloc_err;
}
+ /* set up physical characteristics */
+ wm->codec->phy_init(wm);
+
+ /* load gpio cache */
+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
wm->input_dev = input_allocate_device();
if (wm->input_dev == NULL) {
ret = -ENOMEM;
@@ -616,6 +627,7 @@
/* set up touch configuration */
wm->input_dev->name = "wm97xx touchscreen";
+ wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@
if (ret < 0)
goto dev_alloc_err;
- /* set up physical characteristics */
- wm->codec->phy_init(wm);
-
- /* load gpio cache */
- wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
- wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
- wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
- wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
- wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
- wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
/* register our battery device */
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
if (!wm->battery_dev) {
@@ -801,7 +802,7 @@
EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
static struct device_driver wm97xx_driver = {
- .name = "ac97",
+ .name = "wm97xx-ts",
.bus = &ac97_bus_type,
.owner = THIS_MODULE,
.probe = wm97xx_probe,
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index ebef4ce..29419a8 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -948,17 +948,17 @@
{
g_cmsg= kmalloc(sizeof(_cmsg), GFP_KERNEL);
if (!g_cmsg)
- return ENOMEM;
+ return -ENOMEM;
g_debbuf = kmalloc(sizeof(_cdebbuf), GFP_KERNEL);
if (!g_debbuf) {
kfree(g_cmsg);
- return ENOMEM;
+ return -ENOMEM;
}
g_debbuf->buf = kmalloc(CDEBUG_GSIZE, GFP_KERNEL);
if (!g_debbuf->buf) {
kfree(g_cmsg);
kfree(g_debbuf);
- return ENOMEM;;
+ return -ENOMEM;;
}
g_debbuf->size = CDEBUG_GSIZE;
g_debbuf->buf[0] = 0;
diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig
index c6d8a70..c9e4231 100644
--- a/drivers/isdn/hysdn/Kconfig
+++ b/drivers/isdn/hysdn/Kconfig
@@ -3,7 +3,7 @@
#
config HYSDN
tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
- depends on m && PROC_FS && PCI && BROKEN_ON_SMP
+ depends on m && PROC_FS && PCI
help
Say Y here if you have one of Hypercope's active PCI ISDN cards
Champ, Ergo and Metro. You will then get a module called hysdn.
diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
index 6cdbad3..3eb096f 100644
--- a/drivers/isdn/hysdn/boardergo.c
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -64,10 +64,11 @@
} /* ergo_interrupt */
/******************************************************************************/
-/* ergo_irq_bh is the function called by the immediate kernel task list after */
-/* being activated with queue_task and no interrupts active. This task is the */
-/* only one handling data transfer from or to the card after booting. The task */
-/* may be queued from everywhere (interrupts included). */
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work */
+/* queue sometime after a call to schedule_work has been made passing our */
+/* work_struct. This task is the only one handling data transfer from or to */
+/* the card after booting. The task may be queued from everywhere */
+/* (interrupts included). */
/******************************************************************************/
static void
ergo_irq_bh(struct work_struct *ugli_api)
@@ -90,7 +91,6 @@
card->hw_lock = 1; /* we now lock the hardware */
do {
- sti(); /* reenable other ints */
again = 0; /* assume loop not to be repeated */
if (!dpr->ToHyFlag) {
@@ -110,7 +110,6 @@
again = 1; /* restart loop */
}
} /* a message has arrived for us */
- cli(); /* no further ints */
if (again) {
dpr->ToHyInt = 1;
dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
@@ -242,7 +241,6 @@
byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
/* the interrupts are still masked */
- sti();
msleep_interruptible(20); /* Timeout 20ms */
if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
@@ -276,7 +274,6 @@
dst = sp->Data; /* point to data in spool structure */
buflen = sp->Len; /* maximum len of spooled data */
wr_mirror = sp->WrPtr; /* only once read */
- sti();
/* try until all bytes written or error */
i = 0x1000; /* timeout value */
@@ -380,7 +377,6 @@
#endif /* CONFIG_HYSDN_CAPI */
return (0); /* success */
} /* data has arrived */
- sti();
msleep_interruptible(50); /* Timeout 50ms */
} /* wait until timeout */
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index d3999a8..53f6ad1 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -462,11 +462,11 @@
default: s = "???"; break;
}
len += sprintf(page+len, "%-16s %s\n", "type", s);
- if ((s = cinfo->version[VER_DRIVER]) != 0)
+ if ((s = cinfo->version[VER_DRIVER]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_driver", s);
- if ((s = cinfo->version[VER_CARDTYPE]) != 0)
+ if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s);
- if ((s = cinfo->version[VER_SERIAL]) != 0)
+ if ((s = cinfo->version[VER_SERIAL]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_serial", s);
len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname);
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b3c54be..559a408 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -103,13 +103,11 @@
{
int rc;
- led_cdev->dev = device_create(leds_class, parent, 0, "%s",
- led_cdev->name);
+ led_cdev->dev = device_create_drvdata(leds_class, parent, 0, led_cdev,
+ "%s", led_cdev->name);
if (IS_ERR(led_cdev->dev))
return PTR_ERR(led_cdev->dev);
- dev_set_drvdata(led_cdev->dev, led_cdev);
-
/* register the attributes */
rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
if (rc)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 8080249..1a8de57 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -20,14 +20,11 @@
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* Unique numbering for lguest devices. */
-static unsigned int dev_index;
-
/* For Guests, device memory can be used as normal memory, so we cast away the
* __iomem to quieten sparse. */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
- return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages);
+ return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
}
static inline void lguest_unmap(void *addr)
@@ -325,8 +322,10 @@
* As Andrew Tridgell says, "Untested code is buggy code".
*
* It's worth reading this carefully: we start with a pointer to the new device
- * descriptor in the "lguest_devices" page. */
-static void add_lguest_device(struct lguest_device_desc *d)
+ * descriptor in the "lguest_devices" page, and the offset into the device
+ * descriptor page so we can uniquely identify it if things go badly wrong. */
+static void add_lguest_device(struct lguest_device_desc *d,
+ unsigned int offset)
{
struct lguest_device *ldev;
@@ -334,18 +333,14 @@
* it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
- printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
+ offset, d->type);
return;
}
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = &lguest_root;
/* We have a unique device index thanks to the dev_index counter. */
- ldev->vdev.index = dev_index++;
- /* The device type comes straight from the descriptor. There's also a
- * device vendor field in the virtio_device struct, which we leave as
- * 0. */
ldev->vdev.id.device = d->type;
/* We have a simple set of routines for querying the device's
* configuration information and setting its status. */
@@ -357,8 +352,8 @@
* virtio_device and calls device_register(). This makes the bus
* infrastructure look for a matching driver. */
if (register_virtio_device(&ldev->vdev) != 0) {
- printk(KERN_ERR "Failed to register lguest device %u\n",
- ldev->vdev.index);
+ printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
+ offset, d->type);
kfree(ldev);
}
}
@@ -379,7 +374,7 @@
break;
printk("Device at %i has size %u\n", i, desc_size(d));
- add_lguest_device(d);
+ add_lguest_device(d, i);
}
}
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index c14dacd..b26927c 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -203,17 +203,6 @@
* bitmap file handling - read and write the bitmap file and its superblock
*/
-/* copy the pathname of a file to a buffer */
-char *file_path(struct file *file, char *buf, int count)
-{
- if (!buf)
- return NULL;
-
- buf = d_path(&file->f_path, buf, count);
-
- return IS_ERR(buf) ? NULL : buf;
-}
-
/*
* basic page I/O operations
*/
@@ -721,11 +710,13 @@
if (bitmap->file) {
path = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (path)
- ptr = file_path(bitmap->file, path, PAGE_SIZE);
+ ptr = d_path(&bitmap->file->f_path, path,
+ PAGE_SIZE);
+
printk(KERN_ALERT
"%s: kicking failed bitmap file %s from array!\n",
- bmname(bitmap), ptr ? ptr : "");
+ bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
kfree(path);
} else
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 83eb78b..51c19f8 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -74,6 +74,8 @@
static void md_print_devices(void);
+static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
+
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
/*
@@ -3013,6 +3015,36 @@
static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded);
static ssize_t
+sync_force_parallel_show(mddev_t *mddev, char *page)
+{
+ return sprintf(page, "%d\n", mddev->parallel_resync);
+}
+
+static ssize_t
+sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ long n;
+
+ if (strict_strtol(buf, 10, &n))
+ return -EINVAL;
+
+ if (n != 0 && n != 1)
+ return -EINVAL;
+
+ mddev->parallel_resync = n;
+
+ if (mddev->sync_thread)
+ wake_up(&resync_wait);
+
+ return len;
+}
+
+/* force parallel resync, even with shared block devices */
+static struct md_sysfs_entry md_sync_force_parallel =
+__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR,
+ sync_force_parallel_show, sync_force_parallel_store);
+
+static ssize_t
sync_speed_show(mddev_t *mddev, char *page)
{
unsigned long resync, dt, db;
@@ -3187,6 +3219,7 @@
&md_sync_min.attr,
&md_sync_max.attr,
&md_sync_speed.attr,
+ &md_sync_force_parallel.attr,
&md_sync_completed.attr,
&md_max_sync.attr,
&md_suspend_lo.attr,
@@ -3691,6 +3724,8 @@
module_put(mddev->pers->owner);
mddev->pers = NULL;
+ /* tell userspace to handle 'inactive' */
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
set_capacity(disk, 0);
mddev->changed = 1;
@@ -3987,8 +4022,8 @@
if (!buf)
goto out;
- ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname));
- if (!ptr)
+ ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname));
+ if (IS_ERR(ptr))
goto out;
strcpy(file->pathname, ptr);
@@ -5399,7 +5434,7 @@
atomic_sub(blocks, &mddev->recovery_active);
wake_up(&mddev->recovery_wait);
if (!ok) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread(mddev->thread);
// stop recovery, signal do_sync ....
}
@@ -5435,8 +5470,11 @@
md_wakeup_thread(mddev->thread);
}
spin_unlock_irq(&mddev->write_lock);
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
}
- wait_event(mddev->sb_wait, mddev->flags==0);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
}
void md_write_end(mddev_t *mddev)
@@ -5471,13 +5509,17 @@
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
+
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
+ /* wait for the dirty state to be recorded in the metadata */
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
} else
spin_unlock_irq(&mddev->write_lock);
}
EXPORT_SYMBOL_GPL(md_allow_write);
-static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
-
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
@@ -5541,8 +5583,9 @@
for_each_mddev(mddev2, tmp) {
if (mddev2 == mddev)
continue;
- if (mddev2->curr_resync &&
- match_mddev_units(mddev,mddev2)) {
+ if (!mddev->parallel_resync
+ && mddev2->curr_resync
+ && match_mddev_units(mddev, mddev2)) {
DEFINE_WAIT(wq);
if (mddev < mddev2 && mddev->curr_resync == 2) {
/* arbitrarily yield */
@@ -5647,7 +5690,7 @@
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto out;
}
@@ -5670,8 +5713,7 @@
last_check = io_sectors;
- if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) ||
- test_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
break;
repeat:
@@ -5725,8 +5767,7 @@
/* tell personality that we are finished */
mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
+ if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
mddev->curr_resync > 2) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5795,7 +5836,10 @@
}
if (mddev->degraded) {
- rdev_for_each(rdev, rtmp, mddev)
+ rdev_for_each(rdev, rtmp, mddev) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags))
+ spares++;
if (rdev->raid_disk < 0
&& !test_bit(Faulty, &rdev->flags)) {
rdev->recovery_offset = 0;
@@ -5813,6 +5857,7 @@
} else
break;
}
+ }
}
return spares;
}
@@ -5826,7 +5871,7 @@
* to do that as needed.
* When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in
* "->recovery" and create a thread at ->sync_thread.
- * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR)
+ * When the thread finishes it sets MD_RECOVERY_DONE
* and wakeups up this thread which will reap the thread and finish up.
* This thread also removes any faulty devices (with nr_pending == 0).
*
@@ -5901,8 +5946,7 @@
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
/* success...*/
/* activate any spares */
mddev->pers->spare_active(mddev);
@@ -5926,7 +5970,6 @@
* might be left set
*/
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- clear_bit(MD_RECOVERY_ERR, &mddev->recovery);
clear_bit(MD_RECOVERY_INTR, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 4f4d1f3..e968116 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -327,7 +327,8 @@
if (rdev) {
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
- printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number);
+ printk(KERN_ERR "hot-remove-disk, slot %d is identified"
+ " but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index ac409b7..c610b94 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -773,7 +773,7 @@
r1bio_t *r1_bio;
struct bio *read_bio;
int i, targets = 0, disks;
- struct bitmap *bitmap = mddev->bitmap;
+ struct bitmap *bitmap;
unsigned long flags;
struct bio_list bl;
struct page **behind_pages = NULL;
@@ -802,6 +802,8 @@
wait_barrier(conf);
+ bitmap = mddev->bitmap;
+
disk_stat_inc(mddev->gendisk, ios[rw]);
disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
@@ -1025,7 +1027,7 @@
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
} else
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1146,6 +1148,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices is recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded < conf->raid_disks) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
@@ -1282,6 +1292,7 @@
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
} else {
/* fixup the bio for reuse */
+ int size;
sbio->bi_vcnt = vcnt;
sbio->bi_size = r1_bio->sectors << 9;
sbio->bi_idx = 0;
@@ -1295,10 +1306,20 @@
sbio->bi_sector = r1_bio->sector +
conf->mirrors[i].rdev->data_offset;
sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
- for (j = 0; j < vcnt ; j++)
- memcpy(page_address(sbio->bi_io_vec[j].bv_page),
+ size = sbio->bi_size;
+ for (j = 0; j < vcnt ; j++) {
+ struct bio_vec *bi;
+ bi = &sbio->bi_io_vec[j];
+ bi->bv_offset = 0;
+ if (size > PAGE_SIZE)
+ bi->bv_len = PAGE_SIZE;
+ else
+ bi->bv_len = size;
+ size -= PAGE_SIZE;
+ memcpy(page_address(bi->bv_page),
page_address(pbio->bi_io_vec[j].bv_page),
PAGE_SIZE);
+ }
}
}
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 8536ede..1de17da 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1020,7 +1020,7 @@
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1171,6 +1171,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove faulty devices in recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ enough(conf)) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
@@ -1237,6 +1245,7 @@
if (!uptodate)
md_error(mddev, conf->mirrors[d].rdev);
+
update_head_pos(i, r10_bio);
while (atomic_dec_and_test(&r10_bio->remaining)) {
@@ -1844,7 +1853,8 @@
if (rb2)
atomic_dec(&rb2->remaining);
r10_bio = rb2;
- if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (!test_and_set_bit(MD_RECOVERY_INTR,
+ &mddev->recovery))
printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
mdname(mddev));
break;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 93fde48..425958a 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -94,6 +94,8 @@
#define __inline__
#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
@@ -1143,10 +1145,12 @@
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
@@ -1160,16 +1164,22 @@
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
@@ -1258,7 +1268,7 @@
/*
* if recovery was running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
printk (KERN_ALERT
@@ -4564,6 +4574,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices if recovery
+ * isn't possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded <= conf->max_degraded) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 89d8d37..3b26fbd3 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -901,7 +901,7 @@
config SOC_CAMERA
tristate "SoC camera support"
- depends on VIDEO_V4L2
+ depends on VIDEO_V4L2 && HAS_DMA
select VIDEOBUF_DMA_SG
help
SoC Camera is a common API to several cameras, not connecting
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 2ca3e9c..0165aac 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -2613,7 +2613,7 @@
struct bttv_fh *fh = priv;
mutex_lock(&fh->cap.vb_lock);
- retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
+ retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
V4L2_MEMORY_MMAP);
if (retval < 0) {
mutex_unlock(&fh->cap.vb_lock);
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 198f0af..a0f7bc1 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -92,6 +92,7 @@
unsigned int type; /* chip type id */
unsigned int config;
int (*tuner_callback) (void *dev, int command, int arg);
+ const char *name;
};
/* standard i2c insmod options */
@@ -330,13 +331,13 @@
tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
tuner_warn("will soon be dropped. This message indicates that your\n");
tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
- t->i2c->name, t->i2c->addr);
+ t->name, t->i2c->addr);
tuner_warn("To ensure continued support for your device, please\n");
tuner_warn("send a copy of this message, along with full dmesg\n");
tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
- t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name);
+ t->i2c->adapter->name, t->i2c->addr, t->type, t->name);
tuner_warn("====================== WARNING! ======================\n");
}
@@ -470,19 +471,17 @@
if ((NULL == analog_ops->set_params) &&
(fe_tuner_ops->set_analog_params)) {
- strlcpy(t->i2c->name, fe_tuner_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = fe_tuner_ops->info.name;
t->fe.analog_demod_priv = t;
memcpy(analog_ops, &tuner_core_ops,
sizeof(struct analog_demod_ops));
} else {
- strlcpy(t->i2c->name, analog_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = analog_ops->info.name;
}
- tuner_dbg("type set to %s\n", t->i2c->name);
+ tuner_dbg("type set to %s\n", t->name);
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
@@ -1115,6 +1114,7 @@
if (NULL == t)
return -ENOMEM;
t->i2c = client;
+ t->name = "(tuner unset)";
i2c_set_clientdata(client, t);
t->type = UNSET;
t->audmode = V4L2_TUNER_MODE_STEREO;
@@ -1272,12 +1272,6 @@
list_del(&t->list);
kfree(t);
-
- /* The probing code has overwritten the device name, restore it so
- that reloading the driver will work. Ideally the device name
- should not be overwritten in the first place, but for now that
- will do. */
- strlcpy(client->name, "tuner", I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 982f446..0a88c44 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -331,7 +331,7 @@
}
/* Locking: Caller holds q->vb_lock */
-static int __videobuf_mmap_setup(struct videobuf_queue *q,
+int __videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory)
{
@@ -1129,6 +1129,7 @@
EXPORT_SYMBOL_GPL(videobuf_read_one);
EXPORT_SYMBOL_GPL(videobuf_poll_stream);
+EXPORT_SYMBOL_GPL(__videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_free);
EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 3cdd4e9..1e24ab4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1238,8 +1238,6 @@
sh->max_id = ioc->pfacts->MaxDevices;
sh->max_lun = max_lun;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4684807..4d492ba 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3193,8 +3193,6 @@
sh->transportt = mptsas_transport_template;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b109bd8..c68ef00 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2451,12 +2451,6 @@
ioc->name, sdev->sdtr, sdev->wdtr,
sdev->ppr, sdev->inquiry_len));
- if (sdev->id > sh->max_id) {
- /* error case, should never happen */
- scsi_adjust_queue_depth(sdev, 0, 1);
- goto slave_configure_exit;
- }
-
vdevice->configured_lun = 1;
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
@@ -2470,8 +2464,6 @@
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
-slave_configure_exit:
-
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2566479..ae96bd6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -24,7 +24,7 @@
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB
+ depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fa39410..e4ff50b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,7 +102,6 @@
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
#define v1printk(a...) do { \
if (verbose) \
@@ -119,7 +118,6 @@
} while (0)
#define MAX_CONFIG_LEN 40
-static const char hexchars[] = "0123456789abcdef";
static struct kgdb_io kgdbts_io_ops;
static char get_buf[BUFMAX];
static int get_buf_cnt;
@@ -131,6 +129,8 @@
static int test_complete;
static int send_ack;
static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
static int hw_break_val;
static int hw_break_val2;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
@@ -234,12 +234,12 @@
static void sw_break(char *arg)
{
- break_helper("Z0", arg, 0);
+ break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
}
static void sw_rem_break(char *arg)
{
- break_helper("z0", arg, 0);
+ break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
}
static void hw_break(char *arg)
@@ -619,8 +619,8 @@
count++;
}
strcat(get_buf, "#");
- get_buf[count + 2] = hexchars[checksum >> 4];
- get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 2] = hex_asc_hi(checksum);
+ get_buf[count + 3] = hex_asc_lo(checksum);
get_buf[count + 4] = '\0';
v2printk("get%i: %s\n", ts.idx, get_buf);
}
@@ -781,6 +781,8 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ if (is_hw_breakpoint)
+ hwbreaks_ok = 0;
}
static void run_hw_break_test(int is_write_test)
@@ -798,9 +800,11 @@
kgdb_breakpoint();
hw_break_val_access();
if (is_write_test) {
- if (test_complete == 2)
+ if (test_complete == 2) {
eprintk("kgdbts: ERROR %s broke on access\n",
ts.name);
+ hwbreaks_ok = 0;
+ }
hw_break_val_write();
}
kgdb_breakpoint();
@@ -809,6 +813,7 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ hwbreaks_ok = 0;
}
static void run_nmi_sleep_test(int nmi_sleep)
@@ -912,6 +917,7 @@
/* All HW break point tests */
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ hwbreaks_ok = 1;
v1printk("kgdbts:RUN hw breakpoint test\n");
run_breakpoint_test(1);
v1printk("kgdbts:RUN hw write breakpoint test\n");
@@ -925,6 +931,19 @@
run_nmi_sleep_test(nmi_sleep);
}
+#ifdef CONFIG_DEBUG_RODATA
+ /* Until there is an api to write to read-only text segments, use
+ * HW breakpoints for the remainder of any tests, else print a
+ * failure message if hw breakpoints do not work.
+ */
+ if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+ eprintk("kgdbts: HW breakpoints do not work,"
+ "skipping remaining tests\n");
+ return;
+ }
+ force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 3f28f6e..a0ce0b2 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -3821,7 +3821,7 @@
#define TPACPI_LED_NUMLEDS 8
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
-static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
/* there's a limit of 19 chars + NULL before 2.6.26 */
"tpacpi::power",
"tpacpi:orange:batt",
@@ -3860,10 +3860,10 @@
static int led_set_status(unsigned int led, enum led_status_t ledstatus)
{
/* off, on, blink. Index is led_status_t */
- static const int const led_sled_arg1[] = { 0, 1, 3 };
- static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
- static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
- static const int const led_led_arg1[] = { 0, 0x80, 0xc0 };
+ static const int led_sled_arg1[] = { 0, 1, 3 };
+ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
+ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
+ static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
int rc = 0;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3b3cd0e..dead617 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -119,7 +119,7 @@
config MMC_SPI
tristate "MMC/SD over SPI"
- depends on MMC && SPI_MASTER && !HIGHMEM
+ depends on MMC && SPI_MASTER && !HIGHMEM && HAS_DMA
select CRC7
select CRC_ITU_T
help
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 59d8fb4..effaf7c 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -331,15 +331,15 @@
}
static struct pci_device_id ck804xrom_pci_tbl[] = {
- { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 },
- { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 },
{ 0, }
};
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index e6c545f..b9d097c 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -413,7 +413,7 @@
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
int err;
@@ -605,7 +605,7 @@
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
u_char pos4, pos5;
struct mca_device *mdev = to_mca_device(device);
@@ -635,14 +635,13 @@
printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
- for (i = 0; i < 3; i++) {
- phys_addr[i] = htons(read_eeprom(ioaddr, i));
- }
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
dev = alloc_etherdev(sizeof (struct el3_private));
if (dev == NULL) {
- release_region(ioaddr, EL3_IO_EXTENT);
- return -ENOMEM;
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
}
netdev_boot_setup_check(dev);
@@ -668,7 +667,7 @@
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
struct eisa_device *edev;
int err;
@@ -1063,7 +1062,6 @@
struct sk_buff *skb;
skb = dev_alloc_skb(pkt_len+5);
- dev->stats.rx_bytes += pkt_len;
if (el3_debug > 4)
printk("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
@@ -1078,6 +1076,7 @@
skb->protocol = eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_len;
dev->stats.rx_packets++;
continue;
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9f6cc8a..dd0ec9e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1353,7 +1353,7 @@
config B44
tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE
+ depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
help
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 9c2394d..6e4c80d 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2135,7 +2135,7 @@
return -1;
}
- if (skb->protocol == ntohs(ETH_P_IP)) {
+ if (skb->protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
real_len = (((unsigned char *)iph - skb->data) +
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 3634b5f..7023d77 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1239,12 +1239,7 @@
*/
static irqreturn_t au1000_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
-
- if (dev == NULL) {
- printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
- return IRQ_RETVAL(1);
- }
+ struct net_device *dev = dev_id;
/* Handle RX interrupts first to minimize chance of overrun */
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 89c0018..4144343 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -22,7 +22,6 @@
#include <linux/crc32.h>
#include <linux/device.h>
#include <linux/spinlock.h>
-#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 68c41a0..08f3d39 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1437,8 +1437,16 @@
* configure multiple bonding devices.
*/
if (ret == -EEXIST) {
- netdev_class = NULL;
- return 0;
+ /* Is someone being kinky and naming a device bonding_master? */
+ if (__dev_get_by_name(&init_net,
+ class_attr_bonding_masters.attr.name))
+ printk(KERN_ERR
+ "network device named %s already exists in sysfs",
+ class_attr_bonding_masters.attr.name);
+ else {
+ netdev_class = NULL;
+ return 0;
+ }
}
return ret;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 93e1363..83768df 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -142,8 +142,8 @@
#define DRV_MODULE_NAME "cassini"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5"
-#define DRV_MODULE_RELDATE "4 Jan 2008"
+#define DRV_MODULE_VERSION "1.6"
+#define DRV_MODULE_RELDATE "21 May 2008"
#define CAS_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
@@ -2136,9 +2136,12 @@
if (addr)
cas_page_unmap(addr);
}
- skb->csum = csum_unfold(~csum);
- skb->ip_summed = CHECKSUM_COMPLETE;
skb->protocol = eth_type_trans(skb, cp->dev);
+ if (skb->protocol == htons(ETH_P_IP)) {
+ skb->csum = csum_unfold(~csum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
return len;
}
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 2b5740b..7f3f62e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/gpio.h>
+#include <asm/atomic.h>
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
@@ -187,6 +188,7 @@
#define CPMAC_EOQ 0x1000
struct sk_buff *skb;
struct cpmac_desc *next;
+ struct cpmac_desc *prev;
dma_addr_t mapping;
dma_addr_t data_mapping;
};
@@ -208,6 +210,7 @@
struct work_struct reset_work;
struct platform_device *pdev;
struct napi_struct napi;
+ atomic_t reset_pending;
};
static irqreturn_t cpmac_irq(int, void *);
@@ -241,6 +244,16 @@
printk("\n");
}
+static void cpmac_dump_all_desc(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ struct cpmac_desc *dump = priv->rx_head;
+ do {
+ cpmac_dump_desc(dev, dump);
+ dump = dump->next;
+ } while (dump != priv->rx_head);
+}
+
static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
{
int i;
@@ -412,21 +425,42 @@
static int cpmac_poll(struct napi_struct *napi, int budget)
{
struct sk_buff *skb;
- struct cpmac_desc *desc;
- int received = 0;
+ struct cpmac_desc *desc, *restart;
struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
+ int received = 0, processed = 0;
spin_lock(&priv->rx_lock);
if (unlikely(!priv->rx_head)) {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: rx: polling, but no queue\n",
priv->dev->name);
+ spin_unlock(&priv->rx_lock);
netif_rx_complete(priv->dev, napi);
return 0;
}
desc = priv->rx_head;
+ restart = NULL;
while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
+ processed++;
+
+ if ((desc->dataflags & CPMAC_EOQ) != 0) {
+ /* The last update to eoq->hw_next didn't happen
+ * soon enough, and the receiver stopped here.
+ *Remember this descriptor so we can restart
+ * the receiver after freeing some space.
+ */
+ if (unlikely(restart)) {
+ if (netif_msg_rx_err(priv))
+ printk(KERN_ERR "%s: poll found a"
+ " duplicate EOQ: %p and %p\n",
+ priv->dev->name, restart, desc);
+ goto fatal_error;
+ }
+
+ restart = desc->next;
+ }
+
skb = cpmac_rx_one(priv, desc);
if (likely(skb)) {
netif_receive_skb(skb);
@@ -435,19 +469,90 @@
desc = desc->next;
}
+ if (desc != priv->rx_head) {
+ /* We freed some buffers, but not the whole ring,
+ * add what we did free to the rx list */
+ desc->prev->hw_next = (u32)0;
+ priv->rx_head->prev->hw_next = priv->rx_head->mapping;
+ }
+
+ /* Optimization: If we did not actually process an EOQ (perhaps because
+ * of quota limits), check to see if the tail of the queue has EOQ set.
+ * We should immediately restart in that case so that the receiver can
+ * restart and run in parallel with more packet processing.
+ * This lets us handle slightly larger bursts before running
+ * out of ring space (assuming dev->weight < ring_size) */
+
+ if (!restart &&
+ (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ))
+ == CPMAC_EOQ &&
+ (priv->rx_head->dataflags & CPMAC_OWN) != 0) {
+ /* reset EOQ so the poll loop (above) doesn't try to
+ * restart this when it eventually gets to this descriptor.
+ */
+ priv->rx_head->prev->dataflags &= ~CPMAC_EOQ;
+ restart = priv->rx_head;
+ }
+
+ if (restart) {
+ priv->dev->stats.rx_errors++;
+ priv->dev->stats.rx_fifo_errors++;
+ if (netif_msg_rx_err(priv) && net_ratelimit())
+ printk(KERN_WARNING "%s: rx dma ring overrun\n",
+ priv->dev->name);
+
+ if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: cpmac_poll is trying to "
+ "restart rx from a descriptor that's "
+ "not free: %p\n",
+ priv->dev->name, restart);
+ goto fatal_error;
+ }
+
+ cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping);
+ }
+
priv->rx_head = desc;
spin_unlock(&priv->rx_lock);
if (unlikely(netif_msg_rx_status(priv)))
printk(KERN_DEBUG "%s: poll processed %d packets\n",
priv->dev->name, received);
- if (desc->dataflags & CPMAC_OWN) {
+ if (processed == 0) {
+ /* we ran out of packets to read,
+ * revert to interrupt-driven mode */
netif_rx_complete(priv->dev, napi);
- cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
return 0;
}
return 1;
+
+fatal_error:
+ /* Something went horribly wrong.
+ * Reset hardware to try to recover rather than wedging. */
+
+ if (netif_msg_drv(priv)) {
+ printk(KERN_ERR "%s: cpmac_poll is confused. "
+ "Resetting hardware\n", priv->dev->name);
+ cpmac_dump_all_desc(priv->dev);
+ printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n",
+ priv->dev->name,
+ cpmac_read(priv->regs, CPMAC_RX_PTR(0)),
+ cpmac_read(priv->regs, CPMAC_RX_ACK(0)));
+ }
+
+ spin_unlock(&priv->rx_lock);
+ netif_rx_complete(priv->dev, napi);
+ netif_stop_queue(priv->dev);
+ napi_disable(&priv->napi);
+
+ atomic_inc(&priv->reset_pending);
+ cpmac_hw_stop(priv->dev);
+ if (!schedule_work(&priv->reset_work))
+ atomic_dec(&priv->reset_pending);
+ return 0;
+
}
static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -456,6 +561,9 @@
struct cpmac_desc *desc;
struct cpmac_priv *priv = netdev_priv(dev);
+ if (unlikely(atomic_read(&priv->reset_pending)))
+ return NETDEV_TX_BUSY;
+
if (unlikely(skb_padto(skb, ETH_ZLEN)))
return NETDEV_TX_OK;
@@ -621,8 +729,10 @@
desc->dataflags = CPMAC_OWN;
dev->stats.rx_dropped++;
}
+ desc->hw_next = desc->next->mapping;
desc = desc->next;
}
+ priv->rx_head->prev->hw_next = 0;
}
static void cpmac_clear_tx(struct net_device *dev)
@@ -635,14 +745,14 @@
priv->desc_ring[i].dataflags = 0;
if (priv->desc_ring[i].skb) {
dev_kfree_skb_any(priv->desc_ring[i].skb);
- if (netif_subqueue_stopped(dev, i))
- netif_wake_subqueue(dev, i);
+ priv->desc_ring[i].skb = NULL;
}
}
}
static void cpmac_hw_error(struct work_struct *work)
{
+ int i;
struct cpmac_priv *priv =
container_of(work, struct cpmac_priv, reset_work);
@@ -651,8 +761,48 @@
spin_unlock(&priv->rx_lock);
cpmac_clear_tx(priv->dev);
cpmac_hw_start(priv->dev);
- napi_enable(&priv->napi);
- netif_start_queue(priv->dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ for (i = 0; i < CPMAC_QUEUES; i++)
+ netif_wake_subqueue(priv->dev, i);
+ netif_wake_queue(priv->dev);
+ cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3);
+}
+
+static void cpmac_check_status(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS);
+ int rx_channel = (macstatus >> 8) & 7;
+ int rx_code = (macstatus >> 12) & 15;
+ int tx_channel = (macstatus >> 16) & 7;
+ int tx_code = (macstatus >> 20) & 15;
+
+ if (rx_code || tx_code) {
+ if (netif_msg_drv(priv) && net_ratelimit()) {
+ /* Can't find any documentation on what these
+ *error codes actually are. So just log them and hope..
+ */
+ if (rx_code)
+ printk(KERN_WARNING "%s: host error %d on rx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, rx_code, rx_channel, macstatus);
+ if (tx_code)
+ printk(KERN_WARNING "%s: host error %d on tx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, tx_code, tx_channel, macstatus);
+ }
+
+ netif_stop_queue(dev);
+ cpmac_hw_stop(dev);
+ if (schedule_work(&priv->reset_work))
+ atomic_inc(&priv->reset_pending);
+ if (unlikely(netif_msg_hw(priv)))
+ cpmac_dump_regs(dev);
+ }
+ cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff);
}
static irqreturn_t cpmac_irq(int irq, void *dev_id)
@@ -683,49 +833,32 @@
cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
- if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) {
- if (netif_msg_drv(priv) && net_ratelimit())
- printk(KERN_ERR "%s: hw error, resetting...\n",
- dev->name);
- netif_stop_queue(dev);
- napi_disable(&priv->napi);
- cpmac_hw_stop(dev);
- schedule_work(&priv->reset_work);
- if (unlikely(netif_msg_hw(priv)))
- cpmac_dump_regs(dev);
- }
+ if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS)))
+ cpmac_check_status(dev);
return IRQ_HANDLED;
}
static void cpmac_tx_timeout(struct net_device *dev)
{
- struct cpmac_priv *priv = netdev_priv(dev);
int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
spin_lock(&priv->lock);
dev->stats.tx_errors++;
spin_unlock(&priv->lock);
if (netif_msg_tx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: transmit timeout\n", dev->name);
- /*
- * FIXME: waking up random queue is not the best thing to
- * do... on the other hand why we got here at all?
- */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+
+ atomic_inc(&priv->reset_pending);
+ barrier();
+ cpmac_clear_tx(dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ netif_wake_queue(priv->dev);
for (i = 0; i < CPMAC_QUEUES; i++)
- if (priv->desc_ring[i].skb) {
- priv->desc_ring[i].dataflags = 0;
- dev_kfree_skb_any(priv->desc_ring[i].skb);
- netif_wake_subqueue(dev, i);
- break;
- }
-#else
- priv->desc_ring[0].dataflags = 0;
- if (priv->desc_ring[0].skb)
- dev_kfree_skb_any(priv->desc_ring[0].skb);
- netif_wake_queue(dev);
-#endif
+ netif_wake_subqueue(dev, i);
}
static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -901,9 +1034,12 @@
desc->buflen = CPMAC_SKB_SIZE;
desc->dataflags = CPMAC_OWN;
desc->next = &priv->rx_head[(i + 1) % priv->ring_size];
+ desc->next->prev = desc;
desc->hw_next = (u32)desc->next->mapping;
}
+ priv->rx_head->prev->hw_next = (u32)0;
+
if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED,
dev->name, dev))) {
if (netif_msg_drv(priv))
@@ -912,6 +1048,7 @@
goto fail_irq;
}
+ atomic_set(&priv->reset_pending, 0);
INIT_WORK(&priv->reset_work, cpmac_hw_error);
cpmac_hw_start(dev);
@@ -1007,21 +1144,10 @@
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch) {
- struct fixed_phy_status status = {};
-
- /*
- * FIXME: this should be in the platform code!
- * Since there is not platform code at all (that is,
- * no mainline users of that driver), place it here
- * for now.
- */
- phy_id = 0;
- status.link = 1;
- status.duplex = 1;
- status.speed = 100;
- fixed_phy_add(PHY_POLL, phy_id, &status);
+ mdio_bus_id = 0; /* fixed phys bus */
+ phy_id = pdev->id;
} else {
- printk(KERN_ERR "cpmac: no PHY present\n");
+ dev_err(&pdev->dev, "no PHY present\n");
return -ENODEV;
}
}
@@ -1064,10 +1190,8 @@
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-
- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
+ priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
+ &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not attach to PHY\n",
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index d45bcd2..864295e 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -903,7 +903,7 @@
if (netif_msg_ifdown(db))
dev_dbg(db->dev, "shutting down %s\n", ndev->name);
- cancel_delayed_work(&db->phy_poll);
+ cancel_delayed_work_sync(&db->phy_poll);
netif_stop_queue(ndev);
netif_carrier_off(ndev);
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 8cbb40f..cab1835 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4201,8 +4201,8 @@
struct e1000_adapter *adapter;
struct e1000_hw *hw;
const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
- unsigned long mmio_start, mmio_len;
- unsigned long flash_start, flash_len;
+ resource_size_t mmio_start, mmio_len;
+ resource_size_t flash_start, flash_len;
static int cards_found;
int i, err, pci_using_dac;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index d1b6d4e..287a619 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -2213,8 +2213,6 @@
goto out;
}
- memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter));
-
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
@@ -3178,11 +3176,12 @@
static void ehea_shutdown_single_port(struct ehea_port *port)
{
+ struct ehea_adapter *adapter = port->adapter;
unregister_netdev(port->netdev);
ehea_unregister_port(port);
kfree(port->mc_list);
free_netdev(port->netdev);
- port->adapter->active_ports--;
+ adapter->active_ports--;
}
static int ehea_setup_ports(struct ehea_adapter *adapter)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 35f66d4..9eca97f 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5823,6 +5823,7 @@
writel(txreg, base + NvRegTransmitPoll);
rc = nv_open(dev);
+ nv_set_multicast(dev);
out:
return rc;
}
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 67b4b07..a5baaf5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1093,7 +1093,7 @@
if (registered)
unregister_netdev(ndev);
- if (fep != NULL) {
+ if (fep && fep->ops) {
(*fep->ops->free_bd)(ndev);
(*fep->ops->cleanup_data)(ndev);
}
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index f905159..45ae9d1 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1340,9 +1340,10 @@
case PARAM_RTS:
if ( !(scc->wreg[R5] & RTS) )
{
- if (arg != TX_OFF)
+ if (arg != TX_OFF) {
scc_key_trx(scc, TX_ON);
scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+ }
} else {
if (arg == TX_OFF)
{
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 9081234..6f50ed7 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1120,7 +1120,7 @@
}
}
- if (self->usbdev->descriptor.bcdDevice == fw_version) {
+ if (self->usbdev->descriptor.bcdDevice == cpu_to_le16(fw_version)) {
/*
* If we're here, we've found a correct patch
* The actual image starts after the "STMP" keyword
diff --git a/drivers/net/irda/irda-usb.h b/drivers/net/irda/irda-usb.h
index e846c38..a0ca9c1 100644
--- a/drivers/net/irda/irda-usb.h
+++ b/drivers/net/irda/irda-usb.h
@@ -117,11 +117,11 @@
struct irda_class_desc {
__u8 bLength;
__u8 bDescriptorType;
- __u16 bcdSpecRevision;
+ __le16 bcdSpecRevision;
__u8 bmDataSize;
__u8 bmWindowSize;
__u8 bmMinTurnaroundTime;
- __u16 wBaudRate;
+ __le16 wBaudRate;
__u8 bmAdditionalBOFs;
__u8 bIrdaRateSniff;
__u8 bMaxUnicastList;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c91b12e..36be6ef 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -631,7 +631,7 @@
return status;
}
-int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
+static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
{
struct myri10ge_cmd cmd;
int status;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 8f328a0..a550c9b 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -391,7 +391,9 @@
cardtype = CONTEC;
break;
case MANFID_FUJITSU:
- if (link->card_id == PRODID_FUJITSU_MBH10302)
+ if (link->conf.ConfigBase == 0x0fe0)
+ cardtype = MBH10302;
+ else if (link->card_id == PRODID_FUJITSU_MBH10302)
/* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
but these are MBH10304 based card. */
cardtype = MBH10304;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index d041f83..f6c4698 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1461,22 +1461,25 @@
set_multicast_list(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
+ unsigned value;
SelectPage(0x42);
+ value = GetByte(XIRCREG42_SWC1) & 0xC0;
+
if (dev->flags & IFF_PROMISC) { /* snoop */
- PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
+ PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
} else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
- PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
+ PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
} else if (dev->mc_count) {
/* the chip can filter 9 addresses perfectly */
- PutByte(XIRCREG42_SWC1, 0x01);
+ PutByte(XIRCREG42_SWC1, value | 0x01);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, Offline);
set_addresses(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
} else { /* standard usage */
- PutByte(XIRCREG42_SWC1, 0x00);
+ PutByte(XIRCREG42_SWC1, value | 0x00);
}
SelectPage(0);
}
@@ -1722,6 +1725,7 @@
/* enable receiver and put the mac online */
if (full) {
+ set_multicast_list(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
}
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index a1c454d..1c89b97 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -325,7 +325,7 @@
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
-static int pcnet32_alloc_ring(struct net_device *dev, char *name);
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name);
static void pcnet32_free_ring(struct net_device *dev);
static void pcnet32_check_media(struct net_device *dev, int verbose);
@@ -1983,7 +1983,7 @@
}
/* if any allocation fails, caller must also call pcnet32_free_ring */
-static int pcnet32_alloc_ring(struct net_device *dev, char *name)
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
{
struct pcnet32_private *lp = netdev_priv(dev);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6bf9e76..6eb2d31 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
depends on !S390
- depends on NET_ETHERNET && (BROKEN || !S390)
+ depends on NET_ETHERNET
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ac3c01d..16a0e7d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -207,6 +207,7 @@
return 0;
}
+EXPORT_SYMBOL(get_phy_id);
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device struct
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 79359919..8db342f 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -980,6 +980,8 @@
__wsum csum = 0;
struct udphdr *uh;
unsigned int len;
+ int old_headroom;
+ int new_headroom;
if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
goto abort;
@@ -1001,16 +1003,18 @@
/* Check that there's enough headroom in the skb to insert IP,
* UDP and L2TP and PPP headers. If not enough, expand it to
- * make room. Note that a new skb (or a clone) is
- * allocated. If we return an error from this point on, make
- * sure we free the new skb but do not free the original skb
- * since that is done by the caller for the error case.
+ * make room. Adjust truesize.
*/
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
sizeof(struct udphdr) + hdr_len + sizeof(ppph);
+ old_headroom = skb_headroom(skb);
if (skb_cow_head(skb, headroom))
goto abort;
+ new_headroom = skb_headroom(skb);
+ skb_orphan(skb);
+ skb->truesize += new_headroom - old_headroom;
+
/* Setup PPP header */
__skb_push(skb, sizeof(ppph));
skb->data[0] = ppph[0];
@@ -1065,7 +1069,6 @@
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
skb->dst = dst_clone(__sk_dst_get(sk_tun));
- skb_orphan(skb);
skb->sk = sk_tun;
/* Queue the packet to IP for output */
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 2109508..f8274f8 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -250,7 +250,7 @@
u64 tx_mat0_n[0x8];
#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8)
- u8 unused_1[0x8];
+ u64 xmsi_mask_reg;
u64 stat_byte_cnt;
#define STAT_BC(n) vBIT(n,4,12)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 523478e..b5c1e66 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.23"
+#define DRV_VERSION "2.0.26.24"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -1113,9 +1113,10 @@
struct pci_dev *tdev = NULL;
while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
- if (tdev->bus == s2io_pdev->bus->parent)
+ if (tdev->bus == s2io_pdev->bus->parent) {
pci_dev_put(tdev);
return 1;
+ }
}
}
return 0;
@@ -1219,15 +1220,33 @@
TTI_DATA1_MEM_TX_URNG_B(0x10) |
TTI_DATA1_MEM_TX_URNG_C(0x30) |
TTI_DATA1_MEM_TX_TIMER_AC_EN;
-
- if (use_continuous_tx_intrs && (link == LINK_UP))
- val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ if (i == 0)
+ if (use_continuous_tx_intrs && (link == LINK_UP))
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
writeq(val64, &bar0->tti_data1_mem);
- val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
- TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x40) |
- TTI_DATA2_MEM_TX_UFC_D(0x80);
+ if (nic->config.intr_type == MSI_X) {
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x100) |
+ TTI_DATA2_MEM_TX_UFC_C(0x200) |
+ TTI_DATA2_MEM_TX_UFC_D(0x300);
+ } else {
+ if ((nic->config.tx_steering_type ==
+ TX_DEFAULT_STEERING) &&
+ (config->tx_fifo_num > 1) &&
+ (i >= nic->udp_fifo_idx) &&
+ (i < (nic->udp_fifo_idx +
+ nic->total_udp_fifos)))
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
+ TTI_DATA2_MEM_TX_UFC_B(0x80) |
+ TTI_DATA2_MEM_TX_UFC_C(0x100) |
+ TTI_DATA2_MEM_TX_UFC_D(0x120);
+ else
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x20) |
+ TTI_DATA2_MEM_TX_UFC_C(0x40) |
+ TTI_DATA2_MEM_TX_UFC_D(0x80);
+ }
writeq(val64, &bar0->tti_data2_mem);
@@ -2813,6 +2832,15 @@
}
}
+static int s2io_chk_rx_buffers(struct ring_info *ring)
+{
+ if (fill_rx_buffers(ring) == -ENOMEM) {
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ }
+ return 0;
+}
+
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @napi : pointer to the napi structure.
@@ -2826,57 +2854,73 @@
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-static int s2io_poll(struct napi_struct *napi, int budget)
+static int s2io_poll_msix(struct napi_struct *napi, int budget)
+{
+ struct ring_info *ring = container_of(napi, struct ring_info, napi);
+ struct net_device *dev = ring->dev;
+ struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+ struct s2io_nic *nic = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
+ int budget_org = budget;
+
+ config = &nic->config;
+ mac_control = &nic->mac_control;
+
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
+
+ pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
+
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /*Re Enable MSI-Rx Vector*/
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += 7 - ring->ring_no;
+ val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
+ writeb(val8, addr);
+ val8 = readb(addr);
+ }
+ return pkts_processed;
+}
+static int s2io_poll_inta(struct napi_struct *napi, int budget)
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
+ struct ring_info *ring;
struct net_device *dev = nic->dev;
- int pkt_cnt = 0, org_pkts_to_process;
- struct mac_info *mac_control;
struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ int ring_pkts_processed, i;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- int i;
+ int budget_org = budget;
- mac_control = &nic->mac_control;
config = &nic->config;
+ mac_control = &nic->mac_control;
- nic->pkts_to_process = budget;
- org_pkts_to_process = nic->pkts_to_process;
-
- writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
- readl(&bar0->rx_traffic_int);
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
for (i = 0; i < config->rx_ring_num; i++) {
- rx_intr_handler(&mac_control->rings[i]);
- pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
- if (!nic->pkts_to_process) {
- /* Quota for the current iteration has been met */
- goto no_rx;
- }
- }
-
- netif_rx_complete(dev, napi);
-
- for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
+ ring = &mac_control->rings[i];
+ ring_pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
+ pkts_processed += ring_pkts_processed;
+ budget -= ring_pkts_processed;
+ if (budget <= 0)
break;
- }
}
- /* Re enable the Rx interrupts. */
- writeq(0x0, &bar0->rx_traffic_mask);
- readl(&bar0->rx_traffic_mask);
- return pkt_cnt;
-
-no_rx:
- for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
- break;
- }
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /* Re enable the Rx interrupts for the ring */
+ writeq(0, &bar0->rx_traffic_mask);
+ readl(&bar0->rx_traffic_mask);
}
- return pkt_cnt;
+ return pkts_processed;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2918,7 +2962,7 @@
/* check for received packet and indicate up to network */
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
@@ -2934,7 +2978,8 @@
/**
* rx_intr_handler - Rx interrupt handler
- * @nic: device private variable.
+ * @ring_info: per ring structure.
+ * @budget: budget for napi processing.
* Description:
* If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
@@ -2942,15 +2987,15 @@
* stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
- * NONE.
+ * No. of napi packets processed.
*/
-static void rx_intr_handler(struct ring_info *ring_data)
+static int rx_intr_handler(struct ring_info *ring_data, int budget)
{
int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
- int pkt_cnt = 0;
+ int pkt_cnt = 0, napi_pkts = 0;
int i;
struct RxD1* rxdp1;
struct RxD3* rxdp3;
@@ -2977,7 +3022,7 @@
DBG_PRINT(ERR_DBG, "%s: The skb is ",
ring_data->dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
+ return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
rxdp1 = (struct RxD1*)rxdp;
@@ -3014,9 +3059,10 @@
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
- if(ring_data->nic->config.napi){
- ring_data->nic->pkts_to_process -= 1;
- if (!ring_data->nic->pkts_to_process)
+ if (ring_data->nic->config.napi) {
+ budget--;
+ napi_pkts++;
+ if (!budget)
break;
}
pkt_cnt++;
@@ -3034,6 +3080,7 @@
}
}
}
+ return(napi_pkts);
}
/**
@@ -3730,14 +3777,19 @@
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
- int i;
+ int i, msix_index;
+
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
- val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
+ val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
@@ -3748,13 +3800,17 @@
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
- int i;
+ int i, msix_index;
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
/* Store and display */
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- val64 = (s2BIT(15) | vBIT(i, 26, 6));
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
+ val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
@@ -3770,11 +3826,11 @@
static int s2io_enable_msi_x(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- u64 tx_mat, rx_mat;
+ u64 rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
- nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
+ nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
GFP_KERNEL);
if (!nic->entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
@@ -3783,10 +3839,12 @@
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
+
+ memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
nic->s2io_entries =
- kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
+ kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (!nic->s2io_entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
@@ -3794,60 +3852,52 @@
nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
+ memset(nic->s2io_entries, 0,
+ nic->num_entries * sizeof(struct s2io_msix_entry));
- for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
- nic->entries[i].entry = i;
- nic->s2io_entries[i].entry = i;
+ nic->entries[0].entry = 0;
+ nic->s2io_entries[0].entry = 0;
+ nic->s2io_entries[0].in_use = MSIX_FLG;
+ nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
+ nic->s2io_entries[0].arg = &nic->mac_control.fifos;
+
+ for (i = 1; i < nic->num_entries; i++) {
+ nic->entries[i].entry = ((i - 1) * 8) + 1;
+ nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
nic->s2io_entries[i].arg = NULL;
nic->s2io_entries[i].in_use = 0;
}
- tx_mat = readq(&bar0->tx_mat0_n[0]);
- for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
- tx_mat |= TX_MAT_SET(i, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
- nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
- }
- writeq(tx_mat, &bar0->tx_mat0_n[0]);
-
rx_mat = readq(&bar0->rx_mat);
- for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
+ for (j = 0; j < nic->config.rx_ring_num; j++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
- nic->s2io_entries[msix_indx].arg
- = &nic->mac_control.rings[j];
- nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
+ nic->s2io_entries[j+1].in_use = MSIX_FLG;
+ msix_indx += 8;
}
writeq(rx_mat, &bar0->rx_mat);
+ readq(&bar0->rx_mat);
- nic->avail_msix_vectors = 0;
- ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
- if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
- nic->avail_msix_vectors = ret;
- ret = pci_enable_msix(nic->pdev, nic->entries, ret);
- }
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
- nic->avail_msix_vectors = 0;
return -ENOMEM;
}
- if (!nic->avail_msix_vectors)
- nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
/*
* To enable MSI-X, MSI also needs to be enabled, due to a bug
@@ -3919,7 +3969,7 @@
int i;
u16 msi_control;
- for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+ for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use ==
MSIX_REGISTERED_SUCCESS) {
int vector = sp->entries[i].vector;
@@ -3975,29 +4025,6 @@
netif_carrier_off(dev);
sp->last_link_state = 0;
- if (sp->config.intr_type == MSI_X) {
- int ret = s2io_enable_msi_x(sp);
-
- if (!ret) {
- ret = s2io_test_msi(sp);
- /* rollback MSI-X, will re-enable during add_isr() */
- remove_msix_isr(sp);
- }
- if (ret) {
-
- DBG_PRINT(ERR_DBG,
- "%s: MSI-X requested but failed to enable\n",
- dev->name);
- sp->config.intr_type = INTA;
- }
- }
-
- /* NAPI doesn't work well with MSI(X) */
- if (sp->config.intr_type != INTA) {
- if(sp->config.napi)
- sp->config.napi = 0;
- }
-
/* Initialize H/W and enable interrupts */
err = s2io_card_up(sp);
if (err) {
@@ -4020,12 +4047,12 @@
if (sp->entries) {
kfree(sp->entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (sp->num_entries * sizeof(struct msix_entry));
}
if (sp->s2io_entries) {
kfree(sp->s2io_entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (sp->num_entries * sizeof(struct s2io_msix_entry));
}
}
return err;
@@ -4327,40 +4354,65 @@
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
-static int s2io_chk_rx_buffers(struct ring_info *ring)
-{
- if (fill_rx_buffers(ring) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
- }
- return 0;
-}
-
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
struct ring_info *ring = (struct ring_info *)dev_id;
struct s2io_nic *sp = ring->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct net_device *dev = sp->dev;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
return IRQ_HANDLED;
- rx_intr_handler(ring);
- s2io_chk_rx_buffers(ring);
+ if (sp->config.napi) {
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += (7 - ring->ring_no);
+ val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
+ writeb(val8, addr);
+ val8 = readb(addr);
+ netif_rx_schedule(dev, &ring->napi);
+ } else {
+ rx_intr_handler(ring, 0);
+ s2io_chk_rx_buffers(ring);
+ }
return IRQ_HANDLED;
}
static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
{
- struct fifo_info *fifo = (struct fifo_info *)dev_id;
- struct s2io_nic *sp = fifo->nic;
+ int i;
+ struct fifo_info *fifos = (struct fifo_info *)dev_id;
+ struct s2io_nic *sp = fifos->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct config_param *config = &sp->config;
+ u64 reason;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
+ return IRQ_NONE;
+
+ reason = readq(&bar0->general_int_status);
+ if (unlikely(reason == S2IO_MINUS_ONE))
+ /* Nothing much can be done. Get out */
return IRQ_HANDLED;
- tx_intr_handler(fifo);
+ writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
+
+ if (reason & GEN_INTR_TXTRAFFIC)
+ writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
+
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&fifos[i]);
+
+ writeq(sp->general_int_mask, &bar0->general_int_mask);
+ readl(&bar0->general_int_status);
+
return IRQ_HANDLED;
}
+
static void s2io_txpic_intr_handle(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -4762,14 +4814,10 @@
if (config->napi) {
if (reason & GEN_INTR_RXTRAFFIC) {
- if (likely(netif_rx_schedule_prep(dev,
- &sp->napi))) {
- __netif_rx_schedule(dev, &sp->napi);
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_mask);
- } else
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_int);
+ netif_rx_schedule(dev, &sp->napi);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+ readl(&bar0->rx_traffic_int);
}
} else {
/*
@@ -4781,7 +4829,7 @@
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
}
/*
@@ -6984,62 +7032,62 @@
/* After proper initialization of H/W, register ISR */
if (sp->config.intr_type == MSI_X) {
- int i, msix_tx_cnt=0,msix_rx_cnt=0;
+ int i, msix_rx_cnt = 0;
- for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
- if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
- sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+ for (i = 0; i < sp->num_entries; i++) {
+ if (sp->s2io_entries[i].in_use == MSIX_FLG) {
+ if (sp->s2io_entries[i].type ==
+ MSIX_RING_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+ } else if (sp->s2io_entries[i].type ==
+ MSIX_ALARM_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_fifo_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
- sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
- (unsigned long long)
- sp->msix_info[i].addr,
- (unsigned long long)
- sp->msix_info[i].data);
- } else {
- msix_tx_cnt++;
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+
}
- } else {
- sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
- dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_ring_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
+ /* if either data or addr is zero print it. */
+ if (!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
+ DBG_PRINT(ERR_DBG,
+ "%s @Addr:0x%llx Data:0x%llx\n",
+ sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
(unsigned long long)
- sp->msix_info[i].data);
- } else {
+ ntohl(sp->msix_info[i].data));
+ } else
msix_rx_cnt++;
+ if (err) {
+ remove_msix_isr(sp);
+
+ DBG_PRINT(ERR_DBG,
+ "%s:MSI-X-%d registration "
+ "failed\n", dev->name, i);
+
+ DBG_PRINT(ERR_DBG,
+ "%s: Defaulting to INTA\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ break;
}
+ sp->s2io_entries[i].in_use =
+ MSIX_REGISTERED_SUCCESS;
}
- if (err) {
- remove_msix_isr(sp);
- DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
- "failed\n", dev->name, i);
- DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
- dev->name);
- sp->config.intr_type = INTA;
- break;
- }
- sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
}
if (!err) {
- printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
- msix_tx_cnt);
printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
- msix_rx_cnt);
+ --msix_rx_cnt);
+ DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
+ " through alarm vector\n");
}
}
if (sp->config.intr_type == INTA) {
@@ -7080,8 +7128,15 @@
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
/* Disable napi */
- if (config->napi)
- napi_disable(&sp->napi);
+ if (sp->config.napi) {
+ int off = 0;
+ if (config->intr_type == MSI_X) {
+ for (; off < sp->config.rx_ring_num; off++)
+ napi_disable(&sp->mac_control.rings[off].napi);
+ }
+ else
+ napi_disable(&sp->napi);
+ }
/* disable Tx and Rx traffic on the NIC */
if (do_io)
@@ -7173,8 +7228,15 @@
}
/* Initialise napi */
- if (config->napi)
- napi_enable(&sp->napi);
+ if (config->napi) {
+ int i;
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < sp->config.rx_ring_num; i++)
+ napi_enable(&sp->mac_control.rings[i].napi);
+ } else {
+ napi_enable(&sp->napi);
+ }
+ }
/* Maintain the state prior to the open */
if (sp->promisc_flg)
@@ -7217,7 +7279,7 @@
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
- en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+ en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS);
else {
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
interruptible |= TX_PIC_INTR;
@@ -7615,9 +7677,6 @@
rx_ring_num = MAX_RX_RINGS;
}
- if (*dev_intr_type != INTA)
- napi = 0;
-
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
"Defaulting to INTA\n");
@@ -7918,8 +7977,6 @@
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
- netif_napi_add(dev, &sp->napi, s2io_poll, 32);
-
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = s2io_netpoll;
#endif
@@ -7963,6 +8020,32 @@
}
}
+ if (sp->config.intr_type == MSI_X) {
+ sp->num_entries = config->rx_ring_num + 1;
+ ret = s2io_enable_msi_x(sp);
+
+ if (!ret) {
+ ret = s2io_test_msi(sp);
+ /* rollback MSI-X, will re-enable during add_isr() */
+ remove_msix_isr(sp);
+ }
+ if (ret) {
+
+ DBG_PRINT(ERR_DBG,
+ "%s: MSI-X requested but failed to enable\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ }
+ }
+
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < config->rx_ring_num ; i++)
+ netif_napi_add(dev, &mac_control->rings[i].napi,
+ s2io_poll_msix, 64);
+ } else {
+ netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
+ }
+
/* Not needed for Herc */
if (sp->device_type & XFRAME_I_DEVICE) {
/*
@@ -8013,6 +8096,11 @@
/* store mac addresses from CAM to s2io_nic structure */
do_s2io_store_unicast_mc(sp);
+ /* Configure MSIX vector for number of rings configured plus one */
+ if ((sp->device_type == XFRAME_II_DEVICE) &&
+ (config->intr_type == MSI_X))
+ sp->num_entries = config->rx_ring_num + 1;
+
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */
@@ -8078,8 +8166,14 @@
break;
}
- if (napi)
+ switch (sp->config.napi) {
+ case 0:
+ DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
+ break;
+ case 1:
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+ break;
+ }
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
sp->config.tx_fifo_num);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 0709ebae..4706f7f 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -706,7 +706,7 @@
/* per-ring buffer counter */
u32 rx_bufs_left;
- #define MAX_LRO_SESSIONS 32
+#define MAX_LRO_SESSIONS 32
struct lro lro0_n[MAX_LRO_SESSIONS];
u8 lro;
@@ -725,6 +725,11 @@
/* copy of sp->pdev pointer */
struct pci_dev *pdev;
+ /* Per ring napi struct */
+ struct napi_struct napi;
+
+ unsigned long interrupt_count;
+
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
@@ -841,7 +846,7 @@
* Structure to keep track of the MSI-X vectors and the corresponding
* argument registered against each vector
*/
-#define MAX_REQUESTED_MSI_X 17
+#define MAX_REQUESTED_MSI_X 9
struct s2io_msix_entry
{
u16 vector;
@@ -849,8 +854,8 @@
void *arg;
u8 type;
-#define MSIX_FIFO_TYPE 1
-#define MSIX_RING_TYPE 2
+#define MSIX_ALARM_TYPE 1
+#define MSIX_RING_TYPE 2
u8 in_use;
#define MSIX_REGISTERED_SUCCESS 0xAA
@@ -877,7 +882,6 @@
*/
int pkts_to_process;
struct net_device *dev;
- struct napi_struct napi;
struct mac_info mac_control;
struct config_param config;
struct pci_dev *pdev;
@@ -948,6 +952,7 @@
*/
u8 other_fifo_idx;
+ struct napi_struct napi;
/* after blink, the adapter must be restored with original
* values.
*/
@@ -962,6 +967,7 @@
unsigned long long start_time;
struct vlan_group *vlgrp;
#define MSIX_FLG 0xA5
+ int num_entries;
struct msix_entry *entries;
int msi_detected;
wait_queue_head_t msi_wait;
@@ -982,6 +988,7 @@
u16 lro_max_aggr_per_sess;
volatile unsigned long state;
u64 general_int_mask;
+
#define VPD_STRING_LEN 80
u8 product_name[VPD_STRING_LEN];
u8 serial_num[VPD_STRING_LEN];
@@ -1103,7 +1110,7 @@
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
-static void rx_intr_handler(struct ring_info *ring_data);
+static int rx_intr_handler(struct ring_info *ring_data, int budget);
static void tx_intr_handler(struct fifo_info *fifo_data);
static void s2io_handle_errors(void * dev_id);
@@ -1114,7 +1121,8 @@
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);
static void s2io_reset(struct s2io_nic * sp);
-static int s2io_poll(struct napi_struct *napi, int budget);
+static int s2io_poll_msix(struct napi_struct *napi, int budget);
+static int s2io_poll_inta(struct napi_struct *napi, int budget);
static void s2io_init_pci(struct s2io_nic * sp);
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
static void s2io_alarm_handle(unsigned long data);
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 888b7de..33bb18f 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -179,8 +179,7 @@
#define SBMAC_MAX_TXDESCR 256
#define SBMAC_MAX_RXDESCR 256
-#define ETHER_ALIGN 2
-#define ETHER_ADDR_LEN 6
+#define ETHER_ADDR_LEN 6
#define ENET_PACKET_SIZE 1518
/*#define ENET_PACKET_SIZE 9216 */
@@ -262,8 +261,6 @@
spinlock_t sbm_lock; /* spin lock */
int sbm_devflags; /* current device flags */
- int sbm_buffersize;
-
/*
* Controller-specific things
*/
@@ -305,10 +302,11 @@
static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
int txrx, int maxdescr);
static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m);
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *m);
static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
static void sbdma_emptyring(struct sbmacdma *d);
-static void sbdma_fillring(struct sbmacdma *d);
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
int work_to_do, int poll);
static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
@@ -777,16 +775,13 @@
d->sbdma_remptr = NULL;
}
-static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+static inline void sbdma_align_skb(struct sk_buff *skb,
+ unsigned int power2, unsigned int offset)
{
- unsigned long addr;
- unsigned long newaddr;
+ unsigned char *addr = skb->data;
+ unsigned char *newaddr = PTR_ALIGN(addr, power2);
- addr = (unsigned long) skb->data;
-
- newaddr = (addr + power2 - 1) & ~(power2 - 1);
-
- skb_reserve(skb,newaddr-addr+offset);
+ skb_reserve(skb, newaddr - addr + offset);
}
@@ -797,7 +792,8 @@
* this queues a buffer for inbound packets.
*
* Input parameters:
- * d - DMA channel descriptor
+ * sc - softc structure
+ * d - DMA channel descriptor
* sb - sk_buff to add, or NULL if we should allocate one
*
* Return value:
@@ -806,8 +802,10 @@
********************************************************************* */
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *sb)
{
+ struct net_device *dev = sc->sbm_dev;
struct sbdmadscr *dsc;
struct sbdmadscr *nextdsc;
struct sk_buff *sb_new = NULL;
@@ -848,14 +846,16 @@
*/
if (sb == NULL) {
- sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+ sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+ SMP_CACHE_BYTES * 2 +
+ NET_IP_ALIGN);
if (sb_new == NULL) {
pr_info("%s: sk_buff allocation failed\n",
d->sbdma_eth->sbm_dev->name);
return -ENOBUFS;
}
- sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+ sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
}
else {
sb_new = sb;
@@ -874,10 +874,10 @@
* Do not interrupt per DMA transfer.
*/
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
#else
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
M_DMA_DSCRA_INTERRUPT;
#endif
@@ -1032,18 +1032,19 @@
* with sk_buffs
*
* Input parameters:
- * d - DMA channel
+ * sc - softc structure
+ * d - DMA channel
*
* Return value:
* nothing
********************************************************************* */
-static void sbdma_fillring(struct sbmacdma *d)
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
{
int idx;
- for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
- if (sbdma_add_rcvbuffer(d,NULL) != 0)
+ for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
+ if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
break;
}
}
@@ -1159,10 +1160,11 @@
* packet and put it right back on the receive ring.
*/
- if (unlikely (sbdma_add_rcvbuffer(d,NULL) ==
- -ENOBUFS)) {
+ if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
+ -ENOBUFS)) {
dev->stats.rx_dropped++;
- sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+ /* Re-add old buffer */
+ sbdma_add_rcvbuffer(sc, d, sb);
/* No point in continuing at the moment */
printk(KERN_ERR "dropped packet (1)\n");
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
@@ -1212,7 +1214,7 @@
* put it back on the receive ring.
*/
dev->stats.rx_errors++;
- sbdma_add_rcvbuffer(d,sb);
+ sbdma_add_rcvbuffer(sc, d, sb);
}
@@ -1570,7 +1572,7 @@
* Fill the receive ring
*/
- sbdma_fillring(&(s->sbm_rxdma));
+ sbdma_fillring(s, &(s->sbm_rxdma));
/*
* Turn on the rest of the bits in the enable register
@@ -2312,13 +2314,6 @@
dev->dev_addr[i] = eaddr[i];
}
-
- /*
- * Init packet size
- */
-
- sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
-
/*
* Initialize context (get pointers to registers and stuff), then
* allocate the memory for the descriptor tables.
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index f64a860..b4b6380 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -953,9 +953,6 @@
unsigned entry;
u32 tx_status;
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
-
if (unlikely(skb->len > TX_BUF_SIZE)) {
dev->stats.tx_dropped++;
goto out;
@@ -975,6 +972,11 @@
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
len = skb->len;
+ if (unlikely(len < ETH_ZLEN)) {
+ memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
+ 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
wmb();
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
index 2806201..2c79d27 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/sfc/bitfield.h
@@ -483,7 +483,7 @@
#endif
#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
- if (FALCON_REV(efx) >= FALCON_REV_B0) { \
+ if (falcon_rev(efx) >= FALCON_REV_B0) { \
EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
} else { \
EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
@@ -491,7 +491,7 @@
} while (0)
#define EFX_QWORD_FIELD_VER(efx, qword, field) \
- (FALCON_REV(efx) >= FALCON_REV_B0 ? \
+ (falcon_rev(efx) >= FALCON_REV_B0 ? \
EFX_QWORD_FIELD((qword), field##_B0) : \
EFX_QWORD_FIELD((qword), field##_A1))
@@ -501,8 +501,5 @@
#define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t))
#define EFX_DMA_TYPE_WIDTH(width) \
(((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH)
-#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \
- ~((u64) 0) : ~((u32) 0))
-#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK)
#endif /* EFX_BITFIELD_H */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index eecaa6d..7fc0328 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -27,10 +27,8 @@
struct efx_blinker *bl = &efx->board_info.blinker;
efx->board_info.set_fault_led(efx, bl->state);
bl->state = !bl->state;
- if (bl->resubmit) {
- bl->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&bl->timer);
- }
+ if (bl->resubmit)
+ mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
}
static void board_blink(struct efx_nic *efx, int blink)
@@ -44,8 +42,7 @@
blinker->state = 0;
setup_timer(&blinker->timer, blink_led_timer,
(unsigned long)efx);
- blinker->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&blinker->timer);
+ mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
} else {
blinker->resubmit = 0;
if (blinker->timer.function)
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 418f2e5..4497606 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -199,11 +199,12 @@
*/
static inline void efx_channel_processed(struct efx_channel *channel)
{
- /* Write to EVQ_RPTR_REG. If a new event arrived in a race
- * with finishing processing, a new interrupt will be raised.
- */
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we acknowledge the events we've seen. Make sure
+ * it's cleared before then. */
channel->work_pending = 0;
- smp_wmb(); /* Ensure channel updated before any new interrupt. */
+ smp_wmb();
+
falcon_eventq_read_ack(channel);
}
@@ -265,7 +266,7 @@
napi_disable(&channel->napi_str);
/* Poll the channel */
- (void) efx_process_channel(channel, efx->type->evq_size);
+ efx_process_channel(channel, efx->type->evq_size);
/* Ack the eventq. This may cause an interrupt to be generated
* when they are reenabled */
@@ -317,26 +318,6 @@
*
*************************************************************************/
-/* Setup per-NIC RX buffer parameters.
- * Calculate the rx buffer allocation parameters required to support
- * the current MTU, including padding for header alignment and overruns.
- */
-static void efx_calc_rx_buffer_params(struct efx_nic *efx)
-{
- unsigned int order, len;
-
- len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
- EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
- efx->type->rx_buffer_padding);
-
- /* Calculate page-order */
- for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
- ;
-
- efx->rx_buffer_len = len;
- efx->rx_buffer_order = order;
-}
-
static int efx_probe_channel(struct efx_channel *channel)
{
struct efx_tx_queue *tx_queue;
@@ -387,7 +368,14 @@
struct efx_channel *channel;
int rc = 0;
- efx_calc_rx_buffer_params(efx);
+ /* Calculate the rx buffer allocation parameters required to
+ * support the current MTU, including padding for header
+ * alignment and overruns.
+ */
+ efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+ EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+ efx->type->rx_buffer_padding);
+ efx->rx_buffer_order = get_order(efx->rx_buffer_len);
/* Initialise the channels */
efx_for_each_channel(channel, efx) {
@@ -440,9 +428,12 @@
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we enable it. Make sure it's cleared before
+ * then. Similarly, make sure it sees the enabled flag set. */
channel->work_pending = 0;
channel->enabled = 1;
- smp_wmb(); /* ensure channel updated before first interrupt */
+ smp_wmb();
napi_enable(&channel->napi_str);
@@ -704,7 +695,7 @@
mutex_unlock(&efx->mac_lock);
/* Serialise against efx_set_multicast_list() */
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
@@ -791,22 +782,23 @@
efx->membase = ioremap_nocache(efx->membase_phys,
efx->type->mem_map_size);
if (!efx->membase) {
- EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
- efx->type->mem_bar, efx->membase_phys,
+ EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
+ efx->type->mem_bar,
+ (unsigned long long)efx->membase_phys,
efx->type->mem_map_size);
rc = -ENOMEM;
goto fail4;
}
- EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
- efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
- efx->membase);
+ EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
+ efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+ efx->type->mem_map_size, efx->membase);
return 0;
fail4:
release_mem_region(efx->membase_phys, efx->type->mem_map_size);
fail3:
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
fail2:
pci_disable_device(efx->pci_dev);
fail1:
@@ -824,7 +816,7 @@
if (efx->membase_phys) {
pci_release_region(efx->pci_dev, efx->type->mem_bar);
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
}
pci_disable_device(efx->pci_dev);
@@ -1043,7 +1035,7 @@
return;
if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
return;
- if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+ if (efx_dev_registered(efx) && !netif_running(efx->net_dev))
return;
/* Mark the port as enabled so port reconfigurations can start, then
@@ -1073,9 +1065,8 @@
cancel_delayed_work_sync(&efx->monitor_work);
/* Ensure that all RX slow refills are complete. */
- efx_for_each_rx_queue(rx_queue, efx) {
+ efx_for_each_rx_queue(rx_queue, efx)
cancel_delayed_work_sync(&rx_queue->work);
- }
/* Stop scheduled port reconfigurations */
cancel_work_sync(&efx->reconfigure_work);
@@ -1101,9 +1092,10 @@
falcon_disable_interrupts(efx);
if (efx->legacy_irq)
synchronize_irq(efx->legacy_irq);
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
+ }
/* Stop all NAPI processing and synchronous rx refills */
efx_for_each_channel(channel, efx)
@@ -1125,7 +1117,7 @@
/* Stop the kernel transmit interface late, so the watchdog
* timer isn't ticking over the flush */
efx_stop_queue(efx);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
@@ -1344,13 +1336,17 @@
return 0;
}
-/* Context: process, dev_base_lock held, non-blocking. */
+/* Context: process, dev_base_lock or RTNL held, non-blocking. */
static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
{
struct efx_nic *efx = net_dev->priv;
struct efx_mac_stats *mac_stats = &efx->mac_stats;
struct net_device_stats *stats = &net_dev->stats;
+ /* Update stats if possible, but do not wait if another thread
+ * is updating them (or resetting the NIC); slightly stale
+ * stats are acceptable.
+ */
if (!spin_trylock(&efx->stats_lock))
return stats;
if (efx->state == STATE_RUNNING) {
@@ -1494,7 +1490,7 @@
static int efx_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
- struct net_device *net_dev = (struct net_device *)ptr;
+ struct net_device *net_dev = ptr;
if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
struct efx_nic *efx = net_dev->priv;
@@ -1563,7 +1559,7 @@
efx_for_each_tx_queue(tx_queue, efx)
efx_release_tx_buffers(tx_queue);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
unregister_netdev(efx->net_dev);
}
@@ -1688,7 +1684,7 @@
if (method == RESET_TYPE_DISABLE) {
/* Reinitialise the device anyway so the driver unload sequence
* can talk to the external SRAM */
- (void) falcon_init_nic(efx);
+ falcon_init_nic(efx);
rc = -EIO;
goto fail4;
}
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index b57cc68..d3f749c 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -116,17 +116,8 @@
**************************************************************************
*/
-/* DMA address mask (up to 46-bit, avoiding compiler warnings)
- *
- * Note that it is possible to have a platform with 64-bit longs and
- * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the
- * platform DMA mask.
- */
-#if BITS_PER_LONG == 64
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL)
-#else
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL)
-#endif
+/* DMA address mask */
+#define FALCON_DMA_MASK DMA_BIT_MASK(46)
/* TX DMA length mask (13-bit) */
#define FALCON_TX_DMA_MASK (4096 - 1)
@@ -145,7 +136,7 @@
#define PCI_EXP_LNKSTA_LNK_WID_LBN 4
#define FALCON_IS_DUAL_FUNC(efx) \
- (FALCON_REV(efx) < FALCON_REV_B0)
+ (falcon_rev(efx) < FALCON_REV_B0)
/**************************************************************************
*
@@ -465,7 +456,7 @@
TX_DESCQ_TYPE, 0,
TX_NON_IP_DROP_DIS_B0, 1);
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum);
@@ -474,7 +465,7 @@
falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
tx_queue->queue);
- if (FALCON_REV(efx) < FALCON_REV_B0) {
+ if (falcon_rev(efx) < FALCON_REV_B0) {
efx_oword_t reg;
BUG_ON(tx_queue->queue >= 128); /* HW limit */
@@ -635,7 +626,7 @@
efx_oword_t rx_desc_ptr;
struct efx_nic *efx = rx_queue->efx;
int rc;
- int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0;
+ int is_b0 = falcon_rev(efx) >= FALCON_REV_B0;
int iscsi_digest_en = is_b0;
EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
@@ -822,10 +813,10 @@
tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
tx_queue = &efx->tx_queue[tx_ev_q_label];
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock(efx->net_dev);
falcon_notify_tx_desc(tx_queue);
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock(efx->net_dev);
} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
EFX_WORKAROUND_10727(efx)) {
@@ -884,7 +875,7 @@
RX_EV_TCP_UDP_CHKSUM_ERR);
rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
- rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ?
+ rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
@@ -1065,7 +1056,7 @@
EFX_QWORD_FIELD(*event, XG_PHY_INTR))
is_phy_event = 1;
- if ((FALCON_REV(efx) >= FALCON_REV_B0) &&
+ if ((falcon_rev(efx) >= FALCON_REV_B0) &&
EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0))
is_phy_event = 1;
@@ -1405,7 +1396,7 @@
static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
{
struct falcon_nic_data *nic_data = efx->nic_data;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
efx_oword_t fatal_intr;
int error, mem_perr;
static int n_int_errors;
@@ -1451,8 +1442,8 @@
*/
static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
efx_dword_t reg;
u32 queues;
@@ -1489,8 +1480,8 @@
static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
int syserr;
int queues;
@@ -1542,9 +1533,9 @@
*/
static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
{
- struct efx_channel *channel = (struct efx_channel *)dev_id;
+ struct efx_channel *channel = dev_id;
struct efx_nic *efx = channel->efx;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
int syserr;
efx->last_irq_cpu = raw_smp_processor_id();
@@ -1572,7 +1563,7 @@
unsigned long offset;
efx_dword_t dword;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
for (offset = RX_RSS_INDIR_TBL_B0;
@@ -1595,7 +1586,7 @@
if (!EFX_INT_MODE_USE_MSI(efx)) {
irq_handler_t handler;
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
handler = falcon_legacy_interrupt_b0;
else
handler = falcon_legacy_interrupt_a1;
@@ -1636,12 +1627,13 @@
efx_oword_t reg;
/* Disable MSI/MSI-X interrupts */
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
free_irq(channel->irq, channel);
+ }
/* ACK legacy interrupt */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
falcon_read(efx, ®, INT_ISR0_B0);
else
falcon_irq_ack_a1(efx);
@@ -1732,7 +1724,7 @@
efx_oword_t temp;
int count;
- if ((FALCON_REV(efx) < FALCON_REV_B0) ||
+ if ((falcon_rev(efx) < FALCON_REV_B0) ||
(efx->loopback_mode != LOOPBACK_NONE))
return;
@@ -1785,7 +1777,7 @@
{
efx_oword_t temp;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
/* Isolate the MAC -> RX */
@@ -1823,7 +1815,7 @@
MAC_SPEED, link_speed);
/* On B0, MAC backpressure can be disabled and packets get
* discarded. */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
!efx->link_up);
}
@@ -1841,7 +1833,7 @@
EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
/* Unisolate the MAC -> RX */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
falcon_write(efx, ®, RX_CFG_REG_KER);
}
@@ -1856,7 +1848,7 @@
return 0;
/* Statistics fetch will fail if the MAC is in TX drain */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
efx_oword_t temp;
falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
@@ -1940,7 +1932,7 @@
static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
int addr, int value)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
@@ -2008,7 +2000,7 @@
* could be read, -1 will be returned. */
static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
int value = -1;
@@ -2113,7 +2105,7 @@
falcon_init_mdio(&efx->mii);
/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
efx->flow_control = EFX_FC_RX | EFX_FC_TX;
else
efx->flow_control = EFX_FC_RX;
@@ -2373,7 +2365,7 @@
return -ENODEV;
}
- switch (FALCON_REV(efx)) {
+ switch (falcon_rev(efx)) {
case FALCON_REV_A0:
case 0xff:
EFX_ERR(efx, "Falcon rev A0 not supported\n");
@@ -2399,7 +2391,7 @@
break;
default:
- EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx));
+ EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx));
return -ENODEV;
}
@@ -2419,7 +2411,7 @@
/* Allocate storage for hardware specific data */
nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
- efx->nic_data = (void *) nic_data;
+ efx->nic_data = nic_data;
/* Determine number of ports etc. */
rc = falcon_probe_nic_variant(efx);
@@ -2489,13 +2481,10 @@
*/
int falcon_init_nic(struct efx_nic *efx)
{
- struct falcon_nic_data *data;
efx_oword_t temp;
unsigned thresh;
int rc;
- data = (struct falcon_nic_data *)efx->nic_data;
-
/* Set up the address region register. This is only needed
* for the B0 FPGA, but since we are just pushing in the
* reset defaults this may as well be unconditional. */
@@ -2562,7 +2551,7 @@
/* Set number of RSS queues for receive path. */
falcon_read(efx, &temp, RX_FILTER_CTL_REG);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, NUM_KER, 0);
else
EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1);
@@ -2600,7 +2589,7 @@
/* Prefetch threshold 2 => fetch when descriptor cache half empty */
EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
/* Squash TX of packets of 16 bytes or less */
- if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
+ if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
falcon_write(efx, &temp, TX_CFG2_REG_KER);
@@ -2617,7 +2606,7 @@
if (EFX_WORKAROUND_7575(efx))
EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
(3 * 4096) / 32);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
/* RX FIFO flow control thresholds */
@@ -2633,7 +2622,7 @@
falcon_write(efx, &temp, RX_CFG_REG_KER);
/* Set destination of both TX and RX Flush events */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
falcon_write(efx, &temp, DP_CTRL_REG);
}
@@ -2647,7 +2636,7 @@
falcon_free_buffer(efx, &efx->irq_status);
- (void) falcon_reset_hw(efx, RESET_TYPE_ALL);
+ falcon_reset_hw(efx, RESET_TYPE_ALL);
/* Release the second function after the reset */
if (nic_data->pci_dev2) {
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
index 6117403..492f9bc 100644
--- a/drivers/net/sfc/falcon.h
+++ b/drivers/net/sfc/falcon.h
@@ -23,7 +23,10 @@
FALCON_REV_B0 = 2,
};
-#define FALCON_REV(efx) ((efx)->pci_dev->revision)
+static inline int falcon_rev(struct efx_nic *efx)
+{
+ return efx->pci_dev->revision;
+}
extern struct efx_nic_type falcon_a_nic_type;
extern struct efx_nic_type falcon_b_nic_type;
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index 06e2d68..6d00311 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -1125,7 +1125,7 @@
u8 port1_phy_type;
__le16 asic_sub_revision;
__le16 board_revision;
-} __attribute__ ((packed));
+} __packed;
#define NVCONFIG_BASE 0x300
#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
@@ -1144,6 +1144,6 @@
__le16 board_struct_ver;
__le16 board_checksum;
struct falcon_nvconfig_board_v2 board_v2;
-} __attribute__ ((packed));
+} __packed;
#endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
index ea08184..6670cdf 100644
--- a/drivers/net/sfc/falcon_io.h
+++ b/drivers/net/sfc/falcon_io.h
@@ -56,14 +56,27 @@
#define FALCON_USE_QWORD_IO 1
#endif
-#define _falcon_writeq(efx, value, reg) \
- __raw_writeq((__force u64) (value), (efx)->membase + (reg))
-#define _falcon_writel(efx, value, reg) \
- __raw_writel((__force u32) (value), (efx)->membase + (reg))
-#define _falcon_readq(efx, reg) \
- ((__force __le64) __raw_readq((efx)->membase + (reg)))
-#define _falcon_readl(efx, reg) \
- ((__force __le32) __raw_readl((efx)->membase + (reg)))
+#ifdef FALCON_USE_QWORD_IO
+static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
+ unsigned int reg)
+{
+ __raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
+ unsigned int reg)
+{
+ __raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le32)__raw_readl(efx->membase + reg);
+}
/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index a74b793..dbdcee4 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -221,7 +221,7 @@
{
efx_dword_t reg;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return 1;
/* The ISR latches, so clear it and re-read */
@@ -241,7 +241,7 @@
{
efx_dword_t reg;
- if ((FALCON_REV(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+ if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
return;
/* Flush the ISR */
@@ -454,7 +454,7 @@
EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
__func__, tries);
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
udelay(200);
tries--;
}
@@ -572,7 +572,7 @@
xaui_link_ok = falcon_xaui_link_ok(efx);
if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
/* Call the PHY check_hw routine */
rc = efx->phy_op->check_hw(efx);
@@ -639,7 +639,7 @@
reset = ((flow_control & EFX_FC_TX) &&
!(efx->flow_control & EFX_FC_TX));
if (EFX_WORKAROUND_11482(efx) && reset) {
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
/* Recover by resetting the EM block */
if (efx->link_up)
falcon_drain_tx_fifo(efx);
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 59f261b..5e20e75 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -42,7 +42,7 @@
#ifndef EFX_DRIVER_NAME
#define EFX_DRIVER_NAME "sfc"
#endif
-#define EFX_DRIVER_VERSION "2.2.0136"
+#define EFX_DRIVER_VERSION "2.2"
#ifdef EFX_ENABLE_DEBUG
#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
@@ -52,28 +52,19 @@
#define EFX_WARN_ON_PARANOID(x) do {} while (0)
#endif
-#define NET_DEV_REGISTERED(efx) \
- ((efx)->net_dev->reg_state == NETREG_REGISTERED)
-
-/* Include net device name in log messages if it has been registered.
- * Use efx->name not efx->net_dev->name so that races with (un)registration
- * are harmless.
- */
-#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "")
-
/* Un-rate-limited logging */
#define EFX_ERR(efx, fmt, args...) \
-dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
#define EFX_INFO(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
#ifdef EFX_ENABLE_DEBUG
#define EFX_LOG(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#else
#define EFX_LOG(efx, fmt, args...) \
-dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#endif
#define EFX_TRACE(efx, fmt, args...) do {} while (0)
@@ -90,11 +81,6 @@
#define EFX_LOG_RL(efx, fmt, args...) \
do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
-/* Kernel headers may redefine inline anyway */
-#ifndef inline
-#define inline inline __attribute__ ((always_inline))
-#endif
-
/**************************************************************************
*
* Efx data structures
@@ -695,7 +681,7 @@
struct workqueue_struct *workqueue;
struct work_struct reset_work;
struct delayed_work monitor_work;
- unsigned long membase_phys;
+ resource_size_t membase_phys;
void __iomem *membase;
spinlock_t biu_lock;
enum efx_int_mode interrupt_mode;
@@ -719,7 +705,7 @@
unsigned n_rx_nodesc_drop_cnt;
- void *nic_data;
+ struct falcon_nic_data *nic_data;
struct mutex mac_lock;
int port_enabled;
@@ -760,6 +746,20 @@
void *loopback_selftest;
};
+static inline int efx_dev_registered(struct efx_nic *efx)
+{
+ return efx->net_dev->reg_state == NETREG_REGISTERED;
+}
+
+/* Net device name, for inclusion in log messages if it has been registered.
+ * Use efx->name not efx->net_dev->name so that races with (un)registration
+ * are harmless.
+ */
+static inline const char *efx_dev_name(struct efx_nic *efx)
+{
+ return efx_dev_registered(efx) ? efx->name : "";
+}
+
/**
* struct efx_nic_type - Efx device type definition
* @mem_bar: Memory BAR number
@@ -795,7 +795,7 @@
unsigned int txd_ring_mask;
unsigned int rxd_ring_mask;
unsigned int evq_size;
- dma_addr_t max_dma_mask;
+ u64 max_dma_mask;
unsigned int tx_dma_mask;
unsigned bug5391_mask;
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 6706223..601b001 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -86,14 +86,17 @@
*/
#define EFX_RXD_HEAD_ROOM 2
-/* Macros for zero-order pages (potentially) containing multiple RX buffers */
-#define RX_DATA_OFFSET(_data) \
- (((unsigned long) (_data)) & (PAGE_SIZE-1))
-#define RX_BUF_OFFSET(_rx_buf) \
- RX_DATA_OFFSET((_rx_buf)->data)
-
-#define RX_PAGE_SIZE(_efx) \
- (PAGE_SIZE * (1u << (_efx)->rx_buffer_order))
+static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf)
+{
+ /* Offset is always within one page, so we don't need to consider
+ * the page order.
+ */
+ return (__force unsigned long) buf->data & (PAGE_SIZE - 1);
+}
+static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
+{
+ return PAGE_SIZE << efx->rx_buffer_order;
+}
/**************************************************************************
@@ -106,7 +109,7 @@
static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr,
void **tcpudp_hdr, u64 *hdr_flags, void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct iphdr *iph;
struct tcphdr *th;
@@ -131,12 +134,12 @@
void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct ethhdr *eh;
struct iphdr *iph;
/* We support EtherII and VLAN encapsulated IPv4 */
- eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset);
+ eh = page_address(frag->page) + frag->page_offset;
*mac_hdr = eh;
if (eh->h_proto == htons(ETH_P_IP)) {
@@ -269,7 +272,7 @@
return -ENOMEM;
dma_addr = pci_map_page(efx->pci_dev, rx_buf->page,
- 0, RX_PAGE_SIZE(efx),
+ 0, efx_rx_buf_size(efx),
PCI_DMA_FROMDEVICE);
if (unlikely(pci_dma_mapping_error(dma_addr))) {
@@ -280,14 +283,14 @@
rx_queue->buf_page = rx_buf->page;
rx_queue->buf_dma_addr = dma_addr;
- rx_queue->buf_data = ((char *) page_address(rx_buf->page) +
+ rx_queue->buf_data = (page_address(rx_buf->page) +
EFX_PAGE_IP_ALIGN);
}
- offset = RX_DATA_OFFSET(rx_queue->buf_data);
rx_buf->len = bytes;
- rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
rx_buf->data = rx_queue->buf_data;
+ offset = efx_rx_buf_offset(rx_buf);
+ rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
/* Try to pack multiple buffers per page */
if (efx->rx_buffer_order == 0) {
@@ -295,7 +298,7 @@
rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff);
offset += ((bytes + 0x1ff) & ~0x1ff);
- space = RX_PAGE_SIZE(efx) - offset;
+ space = efx_rx_buf_size(efx) - offset;
if (space >= bytes) {
/* Refs dropped on kernel releasing each skb */
get_page(rx_queue->buf_page);
@@ -344,7 +347,8 @@
EFX_BUG_ON_PARANOID(rx_buf->skb);
if (rx_buf->unmap_addr) {
pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr,
- RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(efx),
+ PCI_DMA_FROMDEVICE);
rx_buf->unmap_addr = 0;
}
} else if (likely(rx_buf->skb)) {
@@ -400,9 +404,10 @@
return 0;
/* Record minimum fill level */
- if (unlikely(fill_level < rx_queue->min_fill))
+ if (unlikely(fill_level < rx_queue->min_fill)) {
if (fill_level)
rx_queue->min_fill = fill_level;
+ }
/* Acquire RX add lock. If this lock is contended, then a fast
* fill must already be in progress (e.g. in the refill
@@ -552,7 +557,7 @@
struct skb_frag_struct frags;
frags.page = rx_buf->page;
- frags.page_offset = RX_BUF_OFFSET(rx_buf);
+ frags.page_offset = efx_rx_buf_offset(rx_buf);
frags.size = rx_buf->len;
lro_receive_frags(lro_mgr, &frags, rx_buf->len,
@@ -597,7 +602,7 @@
if (unlikely(rx_buf->len > hdr_len)) {
struct skb_frag_struct *frag = skb_shinfo(skb)->frags;
frag->page = rx_buf->page;
- frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len;
+ frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len;
frag->size = skb->len - hdr_len;
skb_shinfo(skb)->nr_frags = 1;
skb->data_len = frag->size;
@@ -851,7 +856,8 @@
/* For a page that is part-way through splitting into RX buffers */
if (rx_queue->buf_page != NULL) {
pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr,
- RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(rx_queue->efx),
+ PCI_DMA_FROMDEVICE);
__free_pages(rx_queue->buf_page,
rx_queue->efx->rx_buffer_order);
rx_queue->buf_page = NULL;
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index cbda159..3b2de9f 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -290,7 +290,7 @@
payload = &state->payload;
- received = (struct efx_loopback_payload *)(char *) buf_ptr;
+ received = (struct efx_loopback_payload *) buf_ptr;
received->ip.saddr = payload->ip.saddr;
received->ip.check = payload->ip.check;
@@ -424,10 +424,10 @@
* interrupt handler. */
smp_wmb();
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock_bh(efx->net_dev);
rc = efx_xmit(efx, tx_queue, skb);
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock_bh(efx->net_dev);
if (rc != NETDEV_TX_OK) {
@@ -453,7 +453,7 @@
int tx_done = 0, rx_good, rx_bad;
int i, rc = 0;
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock_bh(efx->net_dev);
/* Count the number of tx completions, and decrement the refcnt. Any
@@ -465,7 +465,7 @@
dev_kfree_skb_any(skb);
}
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock_bh(efx->net_dev);
/* Check TX completion and received packet counts */
@@ -517,6 +517,8 @@
state->packet_count = min(1 << (i << 2), state->packet_count);
state->skbs = kzalloc(sizeof(state->skbs[0]) *
state->packet_count, GFP_KERNEL);
+ if (!state->skbs)
+ return -ENOMEM;
state->flush = 0;
EFX_LOG(efx, "TX queue %d testing %s loopback with %d "
@@ -700,7 +702,7 @@
* "flushing" so all inflight packets are dropped */
BUG_ON(efx->loopback_selftest);
state->flush = 1;
- efx->loopback_selftest = (void *)state;
+ efx->loopback_selftest = state;
rc = efx_test_loopbacks(efx, tests, loopback_modes);
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 725d1a5..66a0d14 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -116,18 +116,18 @@
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
/* Disable port 0 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
/* Clear any over-temperature alert */
- (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+ efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
}
/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
@@ -253,14 +253,14 @@
fail3:
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
fail2:
/* Disable port 0 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
fail1:
return rc;
}
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index b1cd6de..c014606 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -211,6 +211,8 @@
int rc = 0;
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
efx->phy_data = phy_data;
tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
@@ -376,7 +378,7 @@
* perform a special software reset */
if ((phy_data->tx_disabled && !efx->tx_disabled) ||
loop_change) {
- (void) tenxpress_special_reset(efx);
+ tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
}
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 9b436f5..5cdd082 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -387,7 +387,7 @@
if (unlikely(tx_queue->stopped)) {
fill_level = tx_queue->insert_count - tx_queue->read_count;
if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
- EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx));
+ EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
/* Do this under netif_tx_lock(), to avoid racing
* with efx_xmit(). */
@@ -639,11 +639,12 @@
base_dma = tsoh->dma_addr & PAGE_MASK;
p = &tx_queue->tso_headers_free;
- while (*p != NULL)
+ while (*p != NULL) {
if (((unsigned long)*p & PAGE_MASK) == base_kva)
*p = (*p)->next;
else
p = &(*p)->next;
+ }
pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma);
}
@@ -939,9 +940,10 @@
/* Allocate a DMA-mapped header buffer. */
if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) {
- if (tx_queue->tso_headers_free == NULL)
+ if (tx_queue->tso_headers_free == NULL) {
if (efx_tsoh_block_alloc(tx_queue))
return -1;
+ }
EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free);
tsoh = tx_queue->tso_headers_free;
tx_queue->tso_headers_free = tsoh->next;
@@ -1106,9 +1108,10 @@
{
unsigned i;
- if (tx_queue->buffer)
+ if (tx_queue->buffer) {
for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
+ }
while (tx_queue->tso_headers_free != NULL)
efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index dca62f1..35ab19c2 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -16,7 +16,7 @@
*/
#define EFX_WORKAROUND_ALWAYS(efx) 1
-#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1)
+#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
/* XAUI resets if link not detected */
#define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index 3b9f9dd..f3684ad 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -85,7 +85,9 @@
int rc;
phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
- efx->phy_data = (void *) phy_data;
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
" %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f226bca..3bb6053 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1159,17 +1159,9 @@
}
#ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
{
- struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- u16 port = sky2->port;
-
- netif_tx_lock_bh(dev);
- napi_disable(&hw->napi);
-
- sky2->vlgrp = grp;
- if (grp) {
+ if (onoff) {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
@@ -1180,6 +1172,19 @@
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
}
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ netif_tx_lock_bh(dev);
+ napi_disable(&hw->napi);
+
+ sky2->vlgrp = grp;
+ sky2_set_vlan_mode(hw, port, grp != NULL);
sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
@@ -1418,6 +1423,10 @@
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
+#ifdef SKY2_VLAN_TAG_USED
+ sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h
index b880cba..74cf8e1 100644
--- a/drivers/net/tokenring/3c359.h
+++ b/drivers/net/tokenring/3c359.h
@@ -264,7 +264,7 @@
u16 asb;
u8 __iomem *xl_mmio;
- char *xl_card_name;
+ const char *xl_card_name;
struct pci_dev *pdev ;
spinlock_t xl_lock ;
diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h
index c919563..10fbba0 100644
--- a/drivers/net/tokenring/olympic.h
+++ b/drivers/net/tokenring/olympic.h
@@ -254,7 +254,7 @@
u8 __iomem *olympic_mmio;
u8 __iomem *olympic_lap;
struct pci_dev *pdev ;
- char *olympic_card_name ;
+ const char *olympic_card_name;
spinlock_t olympic_lock ;
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 2511ca7..e9e62862 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -225,6 +225,9 @@
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
@@ -339,6 +342,9 @@
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &uli526x_poll;
+#endif
spin_lock_init(&db->lock);
@@ -681,8 +687,9 @@
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
- spin_unlock_irqrestore(&db->lock, flags);
+ /* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
+ spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
@@ -715,6 +722,13 @@
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+ /* ISR grabs the irqsave lock, so this should be safe */
+ uli526x_interrupt(dev->irq, dev);
+}
+#endif
/*
* Free TX resource after TX complete
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index ca0bdac..fb0b918 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -237,7 +237,7 @@
skb->dev = ugeth->dev;
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL,
+ dma_map_single(&ugeth->dev->dev,
skb->data,
ugeth->ug_info->uf_info.max_rx_buf_length +
UCC_GETH_RX_DATA_BUF_ALIGNMENT,
@@ -2158,7 +2158,7 @@
continue;
for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) {
if (ugeth->tx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
(in_be32((u32 __iomem *)bd) &
BD_LENGTH_MASK),
@@ -2186,7 +2186,7 @@
bd = ugeth->p_rx_bd_ring[i];
for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) {
if (ugeth->rx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
ugeth->ug_info->
uf_info.max_rx_buf_length +
@@ -3406,7 +3406,8 @@
/* set up the buffer descriptor */
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE));
+ dma_map_single(&ugeth->dev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE));
/* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index dc6f097..37ecf84 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1440,6 +1440,10 @@
// Belkin F5D5055
USB_DEVICE(0x050d, 0x5055),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // Apple USB Ethernet Adapter
+ USB_DEVICE(0x05ac, 0x1402),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 76752d84..22c17bb 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -423,7 +423,10 @@
catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
- *((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
+ if (catc->is_f5u011)
+ *(__be16 *)tx_buf = cpu_to_be16(skb->len);
+ else
+ *(__le16 *)tx_buf = cpu_to_le16(skb->len);
skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
catc->tx_ptr += skb->len + 2;
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index 0ec7936..c66b9c3 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -218,7 +218,7 @@
/*-------------------------------------------------------------------------*/
#ifndef HAVE_HARDWARE
-#error You need to configure some hardware for this driver
+#warning You need to configure some hardware for this driver
#endif
/*
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 21a7785..ae467f1 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -194,7 +194,7 @@
dev_dbg(&info->control->dev,
"rndis response error, code %d\n", retval);
}
- msleep(2);
+ msleep(20);
}
dev_dbg(&info->control->dev, "rndis response timeout\n");
return -ETIMEDOUT;
@@ -283,8 +283,8 @@
struct rndis_set_c *set_c;
struct rndis_halt *halt;
} u;
- u32 tmp, phym_unspec;
- __le32 *phym;
+ u32 tmp;
+ __le32 phym_unspec, *phym;
int reply_len;
unsigned char *bp;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f926b5a..fe7cdf2 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -470,8 +470,7 @@
kfree_skb(skb);
vi->num--;
}
- while ((skb = __skb_dequeue(&vi->send)) != NULL)
- kfree_skb(skb);
+ __skb_queue_purge(&vi->send);
BUG_ON(vi->num != 0);
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9a83c9d..7f98489 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -43,8 +43,7 @@
#undef DEBUG_LINK
-static struct hdlc_proto *first_proto = NULL;
-
+static struct hdlc_proto *first_proto;
static int hdlc_change_mtu(struct net_device *dev, int new_mtu)
{
@@ -314,21 +313,25 @@
void register_hdlc_protocol(struct hdlc_proto *proto)
{
+ rtnl_lock();
proto->next = first_proto;
first_proto = proto;
+ rtnl_unlock();
}
void unregister_hdlc_protocol(struct hdlc_proto *proto)
{
- struct hdlc_proto **p = &first_proto;
- while (*p) {
- if (*p == proto) {
- *p = proto->next;
- return;
- }
+ struct hdlc_proto **p;
+
+ rtnl_lock();
+ p = &first_proto;
+ while (*p != proto) {
+ BUG_ON(!*p);
p = &((*p)->next);
}
+ *p = proto->next;
+ rtnl_unlock();
}
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 7133c68..762d21c 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -56,6 +56,7 @@
cisco_proto settings;
struct timer_list timer;
+ spinlock_t lock;
unsigned long last_poll;
int up;
int request_sent;
@@ -158,6 +159,7 @@
{
struct net_device *dev = skb->dev;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
struct hdlc_header *data = (struct hdlc_header*)skb->data;
struct cisco_packet *cisco_data;
struct in_device *in_dev;
@@ -220,11 +222,12 @@
goto rx_error;
case CISCO_KEEPALIVE_REQ:
- state(hdlc)->rxseq = ntohl(cisco_data->par1);
- if (state(hdlc)->request_sent &&
- ntohl(cisco_data->par2) == state(hdlc)->txseq) {
- state(hdlc)->last_poll = jiffies;
- if (!state(hdlc)->up) {
+ spin_lock(&st->lock);
+ st->rxseq = ntohl(cisco_data->par1);
+ if (st->request_sent &&
+ ntohl(cisco_data->par2) == st->txseq) {
+ st->last_poll = jiffies;
+ if (!st->up) {
u32 sec, min, hrs, days;
sec = ntohl(cisco_data->time) / 1000;
min = sec / 60; sec -= min * 60;
@@ -232,12 +235,12 @@
days = hrs / 24; hrs -= days * 24;
printk(KERN_INFO "%s: Link up (peer "
"uptime %ud%uh%um%us)\n",
- dev->name, days, hrs,
- min, sec);
+ dev->name, days, hrs, min, sec);
netif_dormant_off(dev);
- state(hdlc)->up = 1;
+ st->up = 1;
}
}
+ spin_unlock(&st->lock);
dev_kfree_skb_any(skb);
return NET_RX_SUCCESS;
@@ -261,24 +264,25 @@
{
struct net_device *dev = (struct net_device *)arg;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
- if (state(hdlc)->up &&
- time_after(jiffies, state(hdlc)->last_poll +
- state(hdlc)->settings.timeout * HZ)) {
- state(hdlc)->up = 0;
+ spin_lock(&st->lock);
+ if (st->up &&
+ time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
+ st->up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
netif_dormant_on(dev);
}
- cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
- htonl(++state(hdlc)->txseq),
- htonl(state(hdlc)->rxseq));
- state(hdlc)->request_sent = 1;
- state(hdlc)->timer.expires = jiffies +
- state(hdlc)->settings.interval * HZ;
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = arg;
- add_timer(&state(hdlc)->timer);
+ cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
+ htonl(st->rxseq));
+ st->request_sent = 1;
+ spin_unlock(&st->lock);
+
+ st->timer.expires = jiffies + st->settings.interval * HZ;
+ st->timer.function = cisco_timer;
+ st->timer.data = arg;
+ add_timer(&st->timer);
}
@@ -286,15 +290,20 @@
static void cisco_start(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
- state(hdlc)->txseq = state(hdlc)->rxseq = 0;
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
- init_timer(&state(hdlc)->timer);
- state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = (unsigned long)dev;
- add_timer(&state(hdlc)->timer);
+ spin_lock_irqsave(&st->lock, flags);
+ st->up = 0;
+ st->request_sent = 0;
+ st->txseq = st->rxseq = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
+
+ init_timer(&st->timer);
+ st->timer.expires = jiffies + HZ; /* First poll after 1 s */
+ st->timer.function = cisco_timer;
+ st->timer.data = (unsigned long)dev;
+ add_timer(&st->timer);
}
@@ -302,10 +311,16 @@
static void cisco_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- del_timer_sync(&state(hdlc)->timer);
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
+
+ del_timer_sync(&st->timer);
+
+ spin_lock_irqsave(&st->lock, flags);
netif_dormant_on(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
+ st->up = 0;
+ st->request_sent = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
}
@@ -367,6 +382,7 @@
return result;
memcpy(&state(hdlc)->settings, &new_settings, size);
+ spin_lock_init(&state(hdlc)->lock);
dev->hard_start_xmit = hdlc->xmit;
dev->header_ops = &cisco_header_ops;
dev->type = ARPHRD_CISCO;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 45f47c1..4e1c690 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2668,6 +2668,7 @@
dev->irq = ethdev->irq;
dev->base_addr = ethdev->base_addr;
dev->wireless_data = ethdev->wireless_data;
+ SET_NETDEV_DEV(dev, ethdev->dev.parent);
memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
err = register_netdev(dev);
if (err<0) {
@@ -2904,7 +2905,7 @@
static int waitbusy (struct airo_info *ai) {
int delay = 0;
- while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+ while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
udelay (10);
if ((++delay % 20) == 0)
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4e5c8fc..635b9ac 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1787,6 +1787,8 @@
spin_lock(&sc->rxbuflock);
do {
+ rxs.flag = 0;
+
if (unlikely(list_empty(&sc->rxbuf))) {
ATH5K_WARN(sc, "empty rx buf pool\n");
break;
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 5fb1ae6..77990b5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -4119,6 +4119,7 @@
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
@@ -4145,7 +4146,7 @@
if (rx_status->rx_status_1 &
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
}
@@ -4193,6 +4194,7 @@
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
@@ -4215,7 +4217,7 @@
if (rx_status->rx_status_1 &
AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_err->rx_error_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
}
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index f51b2d9..1fa043d 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -1,6 +1,6 @@
config B43
tristate "Broadcom 43xx wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 37783cd..dfa4bdd 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -737,6 +737,7 @@
struct ieee80211_tx_control beacon_txctl;
bool beacon0_uploaded;
bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues.
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8fdba94..6c3d9ea 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1544,6 +1544,30 @@
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
@@ -1568,24 +1592,27 @@
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
@@ -4073,6 +4100,9 @@
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
@@ -4241,7 +4271,9 @@
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
@@ -4382,9 +4414,11 @@
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
@@ -4569,6 +4603,10 @@
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 13c65fa..aef2298 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -1,6 +1,6 @@
config B43LEGACY
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 437a9bc..ed4317a1 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -833,6 +833,7 @@
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 7be68db..cdf90c4 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3276,11 +3276,6 @@
}
printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
-#ifndef PRISM2_NO_PROCFS_DEBUG
- create_proc_read_entry("registers", 0, local->proc,
- prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
hostap_init_data(local);
return dev;
@@ -3307,6 +3302,10 @@
netif_carrier_off(local->ddev);
}
hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+ create_proc_read_entry("registers", 0, local->proc,
+ prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
hostap_init_ap_proc(local);
return 0;
}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index fa87c5c..d74c061 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -11584,6 +11584,7 @@
priv->prom_net_dev->hard_start_xmit = ipw_prom_hard_start_xmit;
priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+ SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
rc = register_netdev(priv->prom_net_dev);
if (rc) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
index c9847b1..3a7f0cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
@@ -1162,7 +1162,6 @@
/* Higher rate not available, use the original */
} else {
- new_rate = rate;
break;
}
}
@@ -2009,7 +2008,7 @@
* 2) Not just finishing up a search
* 3) Allowing a new search
*/
- if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index dcfdb40..688d60d 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -73,8 +73,8 @@
return ret;
}
-static void lbs_ethtool_get_stats(struct net_device * dev,
- struct ethtool_stats * stats, u64 * data)
+static void lbs_ethtool_get_stats(struct net_device *dev,
+ struct ethtool_stats *stats, uint64_t *data)
{
struct lbs_private *priv = dev->priv;
struct cmd_ds_mesh_access mesh_access;
@@ -83,12 +83,12 @@
lbs_deb_enter(LBS_DEB_ETHTOOL);
/* Get Mesh Statistics */
- ret = lbs_prepare_and_send_command(priv,
- CMD_MESH_ACCESS, CMD_ACT_MESH_GET_STATS,
- CMD_OPTION_WAITFORRSP, 0, &mesh_access);
+ ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
- if (ret)
+ if (ret) {
+ memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
return;
+ }
priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
@@ -111,19 +111,18 @@
lbs_deb_enter(LBS_DEB_ETHTOOL);
}
-static int lbs_ethtool_get_sset_count(struct net_device * dev, int sset)
+static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- switch (sset) {
- case ETH_SS_STATS:
+ struct lbs_private *priv = dev->priv;
+
+ if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
- default:
- return -EOPNOTSUPP;
- }
+
+ return -EOPNOTSUPP;
}
static void lbs_ethtool_get_strings(struct net_device *dev,
- u32 stringset,
- u8 * s)
+ uint32_t stringset, uint8_t *s)
{
int i;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 406f54d..e1f0660 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -756,6 +756,7 @@
priv->nr_retries = 0;
} else {
priv->cur_cmd = NULL;
+ priv->dnld_sent = DNLD_RES_RECEIVED;
lbs_pr_info("requeueing command %x due to timeout (#%d)\n",
le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries);
@@ -1564,6 +1565,7 @@
rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
rtap_dev->set_multicast_list = lbs_set_multicast_list;
rtap_dev->priv = priv;
+ SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
ret = register_netdev(rtap_dev);
if (ret) {
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 8b7f576..1c216e0 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -461,6 +461,7 @@
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index d0b1fb1..18c9931 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -116,6 +116,7 @@
#define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b)
#define OID_802_11_ADD_KEY ccpu2(0x0d01011d)
#define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e)
+#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f)
#define OID_802_11_PMKID ccpu2(0x0d010123)
#define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203)
#define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204)
@@ -271,6 +272,26 @@
__le32 value_length;
} __attribute__((packed));
+struct ndis_80211_assoc_info {
+ __le32 length;
+ __le16 req_ies;
+ struct req_ie {
+ __le16 capa;
+ __le16 listen_interval;
+ u8 cur_ap_address[6];
+ } req_ie;
+ __le32 req_ie_length;
+ __le32 offset_req_ies;
+ __le16 resp_ies;
+ struct resp_ie {
+ __le16 capa;
+ __le16 status_code;
+ __le16 assoc_id;
+ } resp_ie;
+ __le32 resp_ie_length;
+ __le32 offset_resp_ies;
+} __attribute__((packed));
+
/* these have to match what is in wpa_supplicant */
enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
@@ -674,6 +695,12 @@
return ret;
}
+static int get_association_info(struct usbnet *usbdev,
+ struct ndis_80211_assoc_info *info, int len)
+{
+ return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION,
+ info, &len);
+}
static int is_associated(struct usbnet *usbdev)
{
@@ -2182,11 +2209,40 @@
struct usbnet *usbdev = priv->usbdev;
union iwreq_data evt;
unsigned char bssid[ETH_ALEN];
- int ret;
+ struct ndis_80211_assoc_info *info;
+ int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
+ int ret, offset;
if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) {
- ret = get_bssid(usbdev, bssid);
+ info = kzalloc(assoc_size, GFP_KERNEL);
+ if (!info)
+ goto get_bssid;
+ /* Get association info IEs from device and send them back to
+ * userspace. */
+ ret = get_association_info(usbdev, info, assoc_size);
+ if (!ret) {
+ evt.data.length = le32_to_cpu(info->req_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_req_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCREQIE, &evt,
+ (char *)info + offset);
+ }
+
+ evt.data.length = le32_to_cpu(info->resp_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_resp_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCRESPIE, &evt,
+ (char *)info + offset);
+ }
+ }
+
+ kfree(info);
+
+get_bssid:
+ ret = get_bssid(usbdev, bssid);
if (!ret) {
evt.data.flags = 0;
evt.data.length = 0;
@@ -2414,6 +2470,11 @@
else if (priv->param_power_save > 2)
priv->param_power_save = 2;
+ if (priv->param_power_output < 0)
+ priv->param_power_output = 0;
+ else if (priv->param_power_output > 3)
+ priv->param_power_output = 3;
+
if (priv->param_roamtrigger < -80)
priv->param_roamtrigger = -80;
else if (priv->param_roamtrigger > -60)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 57bdc15..611d983 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -328,6 +328,11 @@
return DEFAULT_RSSI;
}
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+ link->ant.rssi_ant = 0;
+}
+
static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
enum antenna ant)
{
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index a9930a0..48608e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -129,6 +129,7 @@
*/
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
rt2x00lib_reset_link_tuner(rt2x00dev);
+ rt2x00_reset_link_ant_rssi(&rt2x00dev->link);
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index b22c027..2673d56 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -483,9 +483,9 @@
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
}
@@ -507,7 +507,7 @@
* Update TX statistics.
*/
rt2x00dev->link.qual.tx_success += success;
- rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
+ rt2x00dev->link.qual.tx_failed += fail;
/*
* Initialize TX status
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c206b50..87e280a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -93,6 +93,7 @@
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c
index 5d47935..947ee55 100644
--- a/drivers/net/wireless/rtl8180_grf5101.c
+++ b/drivers/net/wireless/rtl8180_grf5101.c
@@ -88,7 +88,7 @@
write_grf5101(dev, 0x0B, chan);
write_grf5101(dev, 0x07, 0x1000);
- grf5101_write_phy_antenna(dev, chan);
+ grf5101_write_phy_antenna(dev, channel);
}
static void grf5101_rf_stop(struct ieee80211_hw *dev)
diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c
index a34dfd3..6c825fd 100644
--- a/drivers/net/wireless/rtl8180_max2820.c
+++ b/drivers/net/wireless/rtl8180_max2820.c
@@ -78,7 +78,8 @@
struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
- int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+ int channel = conf ?
+ ieee80211_frequency_to_channel(conf->channel->center_freq) : 1;
unsigned int chan_idx = channel - 1;
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
u32 chan = max2820_chan[chan_idx];
@@ -87,7 +88,7 @@
* sa2400, for MAXIM we do this directly from BB */
rtl8180_write_phy(dev, 3, txpw);
- max2820_write_phy_antenna(dev, chan);
+ max2820_write_phy_antenna(dev, channel);
write_max2820(dev, 3, chan);
}
diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
index 0311b4e..cea4e0c 100644
--- a/drivers/net/wireless/rtl8180_sa2400.c
+++ b/drivers/net/wireless/rtl8180_sa2400.c
@@ -86,7 +86,7 @@
write_sa2400(dev, 7, txpw);
- sa2400_write_phy_antenna(dev, chan);
+ sa2400_write_phy_antenna(dev, channel);
write_sa2400(dev, 0, chan);
write_sa2400(dev, 1, 0xbb50);
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d5787b3..9223ada 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -92,6 +92,7 @@
u8 data[4];
struct usb_ctrlrequest dr;
} *buf;
+ int rc;
buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
if (!buf)
@@ -116,7 +117,11 @@
usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
(unsigned char *)dr, buf, len,
rtl8187_iowrite_async_cb, buf);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ kfree(buf);
+ usb_free_urb(urb);
+ }
}
static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
@@ -169,6 +174,7 @@
struct urb *urb;
__le16 rts_dur = 0;
u32 flags;
+ int rc;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
@@ -208,7 +214,11 @@
info->dev = dev;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
hdr, skb->len, rtl8187_tx_cb, skb);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ usb_free_urb(urb);
+ kfree_skb(skb);
+ }
return 0;
}
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 69c45ca..6424e5a 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -805,7 +805,7 @@
u16 int_status;
struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
- int_status = le16_to_cpu(*(u16 *)(mac->intr_buffer+4));
+ int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
if (int_status & INT_CFG_NEXT_BCN) {
if (net_ratelimit())
dev_dbg_f(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 12e24f0..8941f5e 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -342,7 +342,7 @@
ZD_ASSERT(in_interrupt());
spin_lock(&intr->lock);
- int_num = le16_to_cpu(*(u16 *)(urb->transfer_buffer+2));
+ int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
if (int_num == CR_INTERRUPT) {
struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
memcpy(&mac->intr_buffer, urb->transfer_buffer,
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 8bddff1..d26f69b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -946,8 +946,7 @@
work_done++;
}
- while ((skb = __skb_dequeue(&errq)))
- kfree_skb(skb);
+ __skb_queue_purge(&errq);
work_done -= handle_incoming_queue(dev, &rxq);
@@ -1079,8 +1078,7 @@
}
}
- while ((skb = __skb_dequeue(&free_list)) != NULL)
- dev_kfree_skb(skb);
+ __skb_queue_purge(&free_list);
spin_unlock_bh(&np->rx_lock);
}
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 925ba16..a11021e 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -619,6 +619,7 @@
int pci_hp_register (struct hotplug_slot *slot)
{
int result;
+ struct hotplug_slot *tmp;
if (slot == NULL)
return -ENODEV;
@@ -630,7 +631,11 @@
return -EINVAL;
}
- /* this can fail if we have already registered a slot with the same name */
+ /* Check if we have already registered a slot with the same name. */
+ tmp = get_slot_from_name(slot->name);
+ if (tmp)
+ return -EEXIST;
+
slot->kobj.kset = pci_hotplug_slots_kset;
result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
"%s", slot->name);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 8264a76..79c9dda 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -97,6 +97,7 @@
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ unsigned int no_cmd_complete:1;
};
#define INT_BUTTON_IGNORE 0
@@ -135,6 +136,7 @@
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define EMI_PRSN 0x00020000
+#define NO_CMD_CMPL_SUP 0x00040000
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
@@ -143,13 +145,14 @@
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+ extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 43d8ddb..48a2ed3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -254,7 +254,11 @@
slot->hp_slot, slot->number, ctrl->slot_device_offset);
retval = pci_hp_register(hotplug_slot);
if (retval) {
- err ("pci_hp_register failed with error %d\n", retval);
+ err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'pciehp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0a7aa62..96a5d55 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -55,16 +55,13 @@
return 0;
}
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* Attention Button Change */
dbg("pciehp: Attention button interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
@@ -76,18 +73,15 @@
return 0;
}
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
{
- struct slot *p_slot;
u8 getstatus;
u32 event_type;
/* Switch Change */
dbg("pciehp: Switch interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
if (getstatus) {
/*
* Switch opened
@@ -107,17 +101,14 @@
return 1;
}
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
u8 presence_save;
/* Presence Change */
dbg("pciehp: Presence/Notify input change.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/* Switch is open, assume a presence change
* Save the presence state
*/
@@ -141,16 +132,13 @@
return 1;
}
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* power fault */
dbg("pciehp: Power fault interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
/*
* power fault Cleared
@@ -163,7 +151,7 @@
*/
info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
- info("power fault bit %x set\n", hp_slot);
+ info("power fault bit %x set\n", 0);
}
queue_interrupt_event(p_slot, event_type);
@@ -186,6 +174,13 @@
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
pslot->hpc_ops->green_led_off(pslot);
@@ -289,6 +284,13 @@
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 891f81a..79f1049 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,14 +247,38 @@
free_irq(ctrl->pci_dev->irq, ctrl);
}
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+ u16 slot_status;
+ int timeout = 1000;
+
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ for (timeout = 1000; timeout > 0; timeout -= 100) {
+ msleep(100);
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ }
+ return 0; /* timeout */
+
+completed:
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
{
int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
- rc = wait_event_interruptible_timeout(ctrl->queue,
+ if (poll)
+ rc = pcie_poll_cmd(ctrl);
+ else
+ rc = wait_event_interruptible_timeout(ctrl->queue,
!ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
@@ -286,12 +310,28 @@
goto out;
}
- if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
- /* After 1 sec and CMD_COMPLETED still not set, just
- proceed forward to issue the next command according
- to spec. Just print out the error message */
- dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
- __func__);
+ if (slot_status & CMD_COMPLETED) {
+ if (!ctrl->no_cmd_complete) {
+ /*
+ * After 1 sec and CMD_COMPLETED still not set, just
+ * proceed forward to issue the next command according
+ * to spec. Just print out the error message.
+ */
+ dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+ __func__);
+ } else if (!NO_CMD_CMPL(ctrl)) {
+ /*
+ * This controller semms to notify of command completed
+ * event even though it supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+ "command completed event.\n", __func__);
+ ctrl->no_cmd_complete = 0;
+ } else {
+ dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+ "controller is broken.\n", __func__);
+ }
}
retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
@@ -315,8 +355,18 @@
/*
* Wait for command completion.
*/
- if (!retval)
- retval = pcie_wait_cmd(ctrl);
+ if (!retval && !ctrl->no_cmd_complete) {
+ int poll = 0;
+ /*
+ * if hotplug interrupt is not enabled or command
+ * completed interrupt is not enabled, we need to poll
+ * command completed event.
+ */
+ if (!(slot_ctrl & HP_INTR_ENABLE) ||
+ !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+ poll = 1;
+ retval = pcie_wait_cmd(ctrl, poll);
+ }
out:
mutex_unlock(&ctrl->ctrl_lock);
return retval;
@@ -704,13 +754,6 @@
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
@@ -722,6 +765,7 @@
{
struct controller *ctrl = (struct controller *)dev_id;
u16 detected, intr_loc;
+ struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
@@ -756,21 +800,38 @@
wake_up_interruptible(&ctrl->queue);
}
+ if (!(intr_loc & ~CMD_COMPLETED))
+ return IRQ_HANDLED;
+
+ /*
+ * Return without handling events if this handler routine is
+ * called before controller initialization is done. This may
+ * happen if hotplug event or another interrupt that shares
+ * the IRQ with pciehp arrives before slot initialization is
+ * done after interrupt handler is registered.
+ *
+ * FIXME - Need more structural fixes. We need to be ready to
+ * handle the event before installing interrupt handler.
+ */
+ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ if (!p_slot || !p_slot->hpc_ops)
+ return IRQ_HANDLED;
+
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
- pciehp_handle_switch_change(0, ctrl);
+ pciehp_handle_switch_change(p_slot);
/* Check Attention Button Pressed */
if (intr_loc & ATTN_BUTTN_PRESSED)
- pciehp_handle_attention_button(0, ctrl);
+ pciehp_handle_attention_button(p_slot);
/* Check Presence Detect Changed */
if (intr_loc & PRSN_DETECT_CHANGED)
- pciehp_handle_presence_change(0, ctrl);
+ pciehp_handle_presence_change(p_slot);
/* Check Power Fault Detected */
if (intr_loc & PWR_FAULT_DETECTED)
- pciehp_handle_power_fault(0, ctrl);
+ pciehp_handle_power_fault(p_slot);
return IRQ_HANDLED;
}
@@ -1028,6 +1089,12 @@
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
+ /* Clear all remaining event bits in Slot Status register */
+ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+ err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+ return -1;
+ }
+
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
err("%s: Cannot mask hotplug interrupt enable\n", __func__);
@@ -1040,16 +1107,6 @@
{
u16 cmd, mask;
- /*
- * We need to clear all events before enabling hotplug interrupt
- * notification mechanism in order for hotplug controler to
- * generate interrupts.
- */
- if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
- err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
- return -1;
- }
-
cmd = PRSN_DETECT_ENABLE;
if (ATTN_BUTTN(ctrl))
cmd |= ATTN_BUTTN_ENABLE;
@@ -1116,6 +1173,7 @@
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
+ dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, ®16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, ®16);
@@ -1147,6 +1205,15 @@
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
+ /*
+ * Controller doesn't notify of command completion if the "No
+ * Command Completed Support" bit is set in Slot Capability
+ * register or the controller supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ if (NO_CMD_CMPL(ctrl) ||
+ !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+ ctrl->no_cmd_complete = 1;
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a..779c5db 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
#include "rpadlpar.h"
#define DLPAR_KOBJ_NAME "control"
-#define ADD_SLOT_ATTR_NAME "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
#define MAX_DRC_NAME_LEN 64
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1648076..9784865 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -162,6 +162,10 @@
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'shpchp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 61fedb2..f824955 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -506,6 +506,23 @@
pdev->link_state = NULL;
}
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+ struct pci_dev *child_dev;
+ int child_pos;
+
+ /*
+ * Some functions in a slot might not all be PCIE functions, very
+ * strange. Disable ASPM for the whole slot
+ */
+ list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+ child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ if (!child_pos)
+ return -EINVAL;
+ }
+ return 0;
+}
+
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
* It is called after the pcie and its children devices are scaned.
@@ -526,6 +543,9 @@
if (list_empty(&pdev->subordinate->devices))
goto out;
+ if (pcie_aspm_sanity_check(pdev))
+ goto out;
+
mutex_lock(&aspm_lock);
link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 0a6cea1..52d0aa8 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -352,6 +352,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, electra_cf_match);
static struct of_platform_driver electra_cf_driver = {
.name = (char *)driver_name,
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index e2b7de4..1ff3bb5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -286,7 +286,7 @@
pci_name(pdev), i,
(unsigned long long) pci_start,
(unsigned long long) pci_end);
- res->flags = 0;
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 9c2496d..8f0a570 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
- if (res->flags & IORESOURCE_UNSET)
+ if (res->flags & IORESOURCE_DISABLED)
continue;
reserve_range(dev, res->start, res->end, 0);
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 138dd76..af1633e 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -91,15 +91,13 @@
{
int rc = 0;
- psy->dev = device_create(power_supply_class, parent, 0,
- "%s", psy->name);
+ psy->dev = device_create_drvdata(power_supply_class, parent, 0,
+ psy, "%s", psy->name);
if (IS_ERR(psy->dev)) {
rc = PTR_ERR(psy->dev);
goto dev_create_failed;
}
- dev_set_drvdata(psy->dev, psy);
-
INIT_WORK(&psy->changed_work, power_supply_changed_work);
rc = power_supply_create_attrs(psy);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 8ba3f13..1a40256 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -63,6 +63,7 @@
*/
static wait_queue_head_t dasd_init_waitq;
static wait_queue_head_t dasd_flush_wq;
+static wait_queue_head_t generic_waitq;
/*
* Allocate memory for a new device structure.
@@ -1151,11 +1152,15 @@
struct list_head *l, *n;
struct dasd_ccw_req *cqr;
struct dasd_block *block;
+ void (*callback)(struct dasd_ccw_req *, void *data);
+ void *callback_data;
list_for_each_safe(l, n, final_queue) {
cqr = list_entry(l, struct dasd_ccw_req, devlist);
list_del_init(&cqr->devlist);
block = cqr->block;
+ callback = cqr->callback;
+ callback_data = cqr->callback_data;
if (block)
spin_lock_bh(&block->queue_lock);
switch (cqr->status) {
@@ -1176,7 +1181,7 @@
BUG();
}
if (cqr->callback != NULL)
- (cqr->callback)(cqr, cqr->callback_data);
+ (callback)(cqr, callback_data);
if (block)
spin_unlock_bh(&block->queue_lock);
}
@@ -1406,17 +1411,15 @@
*/
int dasd_sleep_on(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -1429,20 +1432,18 @@
*/
int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr));
+ rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr));
if (rc == -ERESTARTSYS) {
dasd_cancel_req(cqr);
/* wait (non-interruptible) for final status */
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
}
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
return rc;
@@ -1466,7 +1467,6 @@
int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
@@ -1478,9 +1478,8 @@
return rc;
}
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
cqr->status = DASD_CQR_QUEUED;
list_add(&cqr->devlist, &device->ccw_queue);
@@ -1489,7 +1488,7 @@
spin_unlock_irq(get_ccwdev_lock(device->cdev));
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -2430,6 +2429,7 @@
init_waitqueue_head(&dasd_init_waitq);
init_waitqueue_head(&dasd_flush_wq);
+ init_waitqueue_head(&generic_waitq);
/* register 'common' DASD debug area, used for all DBF_XXX calls */
dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long));
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 0d98f1f..848ef7e 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -549,7 +549,6 @@
struct raw3270_request *rq)
{
unsigned long flags;
- wait_queue_head_t wq;
int rc;
#ifdef CONFIG_TN3270_CONSOLE
@@ -566,20 +565,20 @@
return rq->rc;
}
#endif
- init_waitqueue_head(&wq);
rq->callback = raw3270_wake_init;
- rq->callback_data = &wq;
+ rq->callback_data = &raw3270_wait_queue;
spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
rc = __raw3270_start(rp, view, rq);
spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
if (rc)
return rc;
/* Now wait for the completion. */
- rc = wait_event_interruptible(wq, raw3270_request_final(rq));
+ rc = wait_event_interruptible(raw3270_wait_queue,
+ raw3270_request_final(rq));
if (rc == -ERESTARTSYS) { /* Interrupted by a signal. */
raw3270_halt_io(view->dev, rq);
/* No wait for the halt to complete. */
- wait_event(wq, raw3270_request_final(rq));
+ wait_event(raw3270_wait_queue, raw3270_request_final(rq));
return -ERESTARTSYS;
}
return rq->rc;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index 9e784d5..ad05a87 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -40,7 +40,7 @@
put_online_cpus();
}
-static void sclp_cpu_change_notify(struct work_struct *work)
+static void __ref sclp_cpu_change_notify(struct work_struct *work)
{
smp_rescan_cpus();
}
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 35707c0..62576af 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -71,9 +71,6 @@
/* Number of requests in outqueue */
static int sclp_vt220_outqueue_count;
-/* Wait queue used to delay write requests while we've run out of buffers */
-static wait_queue_head_t sclp_vt220_waitq;
-
/* Timer used for delaying write requests to merge subsequent messages into
* a single buffer */
static struct timer_list sclp_vt220_timer;
@@ -133,7 +130,6 @@
} while (request && __sclp_vt220_emit(request));
if (request == NULL && sclp_vt220_flush_later)
sclp_vt220_emit_current();
- wake_up(&sclp_vt220_waitq);
/* Check if the tty needs a wake up call */
if (sclp_vt220_tty != NULL) {
tty_wakeup(sclp_vt220_tty);
@@ -383,7 +379,7 @@
*/
static int
__sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
- int convertlf, int may_schedule)
+ int convertlf, int may_fail)
{
unsigned long flags;
void *page;
@@ -395,15 +391,14 @@
overall_written = 0;
spin_lock_irqsave(&sclp_vt220_lock, flags);
do {
- /* Create a sclp output buffer if none exists yet */
+ /* Create an sclp output buffer if none exists yet */
if (sclp_vt220_current_request == NULL) {
while (list_empty(&sclp_vt220_empty)) {
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
- if (in_interrupt() || !may_schedule)
- sclp_sync_wait();
+ if (may_fail)
+ goto out;
else
- wait_event(sclp_vt220_waitq,
- !list_empty(&sclp_vt220_empty));
+ sclp_sync_wait();
spin_lock_irqsave(&sclp_vt220_lock, flags);
}
page = (void *) sclp_vt220_empty.next;
@@ -437,6 +432,7 @@
add_timer(&sclp_vt220_timer);
}
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+out:
return overall_written;
}
@@ -520,19 +516,11 @@
* character to the tty device. If the kernel uses this routine,
* it must call the flush_chars() routine (if defined) when it is
* done stuffing characters into the driver.
- *
- * NOTE: include/linux/tty_driver.h specifies that a character should be
- * ignored if there is no room in the queue. This driver implements a different
- * semantic in that it will block when there is no more room left.
- *
- * FIXME: putchar can currently be called from BH and other non blocking
- * handlers so this semantic isn't a good idea.
*/
static int
sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
{
- __sclp_vt220_write(&ch, 1, 0, 0, 1);
- return 1;
+ return __sclp_vt220_write(&ch, 1, 0, 0, 1);
}
/*
@@ -653,7 +641,6 @@
spin_lock_init(&sclp_vt220_lock);
INIT_LIST_HEAD(&sclp_vt220_empty);
INIT_LIST_HEAD(&sclp_vt220_outqueue);
- init_waitqueue_head(&sclp_vt220_waitq);
init_timer(&sclp_vt220_timer);
sclp_vt220_current_request = NULL;
sclp_vt220_buffered_chars = 0;
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index dddf8d6..d0d565a 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -231,6 +231,9 @@
/* Request queue. */
struct list_head req_queue;
+ /* Request wait queue. */
+ wait_queue_head_t wait_queue;
+
/* Each tape device has (currently) two minor numbers. */
int first_minor;
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index ddc4a11..95da72b 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -179,11 +179,11 @@
tapeblock_end_request(req, -EIO);
continue;
}
+ blkdev_dequeue_request(req);
+ nr_queued++;
spin_unlock_irq(&device->blk_data.request_queue_lock);
rc = tapeblock_start_request(device, req);
spin_lock_irq(&device->blk_data.request_queue_lock);
- blkdev_dequeue_request(req);
- nr_queued++;
}
spin_unlock_irq(&device->blk_data.request_queue_lock);
atomic_set(&device->blk_data.requeue_scheduled, 0);
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 76e44eb..c20e3c5 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -449,6 +449,7 @@
INIT_LIST_HEAD(&device->req_queue);
INIT_LIST_HEAD(&device->node);
init_waitqueue_head(&device->state_change_wq);
+ init_waitqueue_head(&device->wait_queue);
device->tape_state = TS_INIT;
device->medium_state = MS_UNKNOWN;
*device->modeset_byte = 0;
@@ -954,21 +955,19 @@
int
tape_do_io(struct tape_device *device, struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
/* Add request to request queue and try to start it. */
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- wait_event(wq, (request->callback == NULL));
+ wait_event(device->wait_queue, (request->callback == NULL));
/* Get rc from request */
return request->rc;
}
@@ -989,20 +988,19 @@
tape_do_io_interruptible(struct tape_device *device,
struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up_interruptible;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- rc = wait_event_interruptible(wq, (request->callback == NULL));
+ rc = wait_event_interruptible(device->wait_queue,
+ (request->callback == NULL));
if (rc != -ERESTARTSYS)
/* Request finished normally. */
return request->rc;
@@ -1015,7 +1013,7 @@
/* Wait for the interrupt that acknowledges the halt. */
do {
rc = wait_event_interruptible(
- wq,
+ device->wait_queue,
(request->callback == NULL)
);
} while (rc == -ERESTARTSYS);
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index e848734..2c2428c 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -762,10 +762,10 @@
device_unregister(dev);
return ret;
}
- priv->class_device = device_create(vmlogrdr_class, dev,
- MKDEV(vmlogrdr_major,
- priv->minor_num),
- "%s", dev->bus_id);
+ priv->class_device = device_create_drvdata(vmlogrdr_class, dev,
+ MKDEV(vmlogrdr_major,
+ priv->minor_num),
+ priv, "%s", dev->bus_id);
if (IS_ERR(priv->class_device)) {
ret = PTR_ERR(priv->class_device);
priv->class_device=NULL;
@@ -773,7 +773,6 @@
device_unregister(dev);
return ret;
}
- dev->driver_data = priv;
priv->device = dev;
return 0;
}
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 9f55ce6..5ab3434 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -31,11 +31,6 @@
*/
static void *kvm_devices;
-/*
- * Unique numbering for kvm devices.
- */
-static unsigned int dev_index;
-
struct kvm_device {
struct virtio_device vdev;
struct kvm_device_desc *desc;
@@ -250,26 +245,25 @@
* adds a new device and register it with virtio
* appropriate drivers are loaded by the device model
*/
-static void add_kvm_device(struct kvm_device_desc *d)
+static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset)
{
struct kvm_device *kdev;
kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
if (!kdev) {
- printk(KERN_EMERG "Cannot allocate kvm dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n",
+ offset, d->type);
return;
}
kdev->vdev.dev.parent = &kvm_root;
- kdev->vdev.index = dev_index++;
kdev->vdev.id.device = d->type;
kdev->vdev.config = &kvm_vq_configspace_ops;
kdev->desc = d;
if (register_virtio_device(&kdev->vdev) != 0) {
- printk(KERN_ERR "Failed to register kvm device %u\n",
- kdev->vdev.index);
+ printk(KERN_ERR "Failed to register kvm device %u type %u\n",
+ offset, d->type);
kfree(kdev);
}
}
@@ -289,7 +283,7 @@
if (d->type == 0)
break;
- add_kvm_device(d);
+ add_kvm_device(d, i);
}
}
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index b87037e..03c9660 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -869,7 +869,7 @@
instances[idx].mode = COMPATIBILITY;
instances[idx].run_length = 0;
instances[idx].run_flag = 0;
- if (!request_region(lpAddr,3, dev_name)) return;
+ if (!request_region(lpAddr,3, bpp_dev_name)) return;
/*
* First, make sure the instance exists. Do this by writing to
@@ -1021,7 +1021,7 @@
if (rc == 0)
return -ENODEV;
- rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops);
+ rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
if (rc < 0)
return rc;
@@ -1037,7 +1037,7 @@
{
unsigned idx;
- unregister_chrdev(BPP_MAJOR, dev_name);
+ unregister_chrdev(BPP_MAJOR, bpp_dev_name);
for (idx = 0; idx < BPP_NO; idx++) {
if (instances[idx].present)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b31faec..867f6fd 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1278,7 +1278,7 @@
error = 0;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status != 0) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
error = twa_fill_sense(tw_dev, request_id, 1, 1);
} else {
/* Skip ioctl error prints */
@@ -1290,7 +1290,7 @@
/* Check for correct state */
if (tw_dev->state[request_id] != TW_S_POSTED) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
@@ -1298,7 +1298,7 @@
}
/* Check for internal command completion */
- if (tw_dev->srb[request_id] == 0) {
+ if (tw_dev->srb[request_id] == NULL) {
if (request_id != tw_dev->chrdev_request_id) {
if (twa_aen_complete(tw_dev, request_id))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 1dca177..0899cb6 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -3582,7 +3582,7 @@
if (i == ARRAY_SIZE(ports))
return 0;
- if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
return 0;
}
@@ -3842,7 +3842,7 @@
if ((setup_count == 1) && (setup[0].io_port == ports[i]))
continue;
- if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(ports[i], IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
continue;
}
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index db6de5e..7d31154 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -747,7 +747,7 @@
dev->quhd[c] = 0;
}
workreq = dev->quereq[c][dev->quhd[c]];
- if (dev->id[c][scmd_id(workreq)].curr_req == 0) {
+ if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
goto cmd_subp;
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 75c84d7..c4b938b 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -910,9 +910,9 @@
ch->minor = minor;
sprintf(ch->name,"ch%d",ch->minor);
- class_dev = device_create(ch_sysfs_class, dev,
- MKDEV(SCSI_CHANGER_MAJOR,ch->minor),
- "s%s", ch->name);
+ class_dev = device_create_drvdata(ch_sysfs_class, dev,
+ MKDEV(SCSI_CHANGER_MAJOR, ch->minor),
+ ch, "s%s", ch->name);
if (IS_ERR(class_dev)) {
printk(KERN_WARNING "ch%d: device_create failed\n",
ch->minor);
@@ -926,7 +926,6 @@
if (init)
ch_init_elem(ch);
- dev_set_drvdata(dev, ch);
sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
return 0;
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index aaa48e0..da876d3 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -444,7 +444,7 @@
if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) {
printk(KERN_ERR "scsi%d: pci resource invalid\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
mem_base_phy = pci_resource_start(pcidev, index);
@@ -454,7 +454,7 @@
if (!mem_base_virt) {
printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
return mem_base_virt;
}
@@ -476,11 +476,11 @@
static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba)
{
hba->u.mv.regs = hptiop_map_pci_bar(hba, 0);
- if (hba->u.mv.regs == 0)
+ if (hba->u.mv.regs == NULL)
return -1;
hba->u.mv.mu = hptiop_map_pci_bar(hba, 2);
- if (hba->u.mv.mu == 0) {
+ if (hba->u.mv.mu == NULL) {
iounmap(hba->u.mv.regs);
return -1;
}
@@ -1210,8 +1210,8 @@
static struct hptiop_adapter_ops hptiop_itl_ops = {
.iop_wait_ready = iop_wait_ready_itl,
- .internal_memalloc = 0,
- .internal_memfree = 0,
+ .internal_memalloc = NULL,
+ .internal_memfree = NULL,
.map_pci_bar = hptiop_map_pci_bar_itl,
.unmap_pci_bar = hptiop_unmap_pci_bar_itl,
.enable_intr = hptiop_enable_intr_itl,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ccfd8ac..5d23368 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1348,7 +1348,7 @@
del_timer(&evt_struct->timer);
- if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+ if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
evt_struct->cmnd->result = DID_ERROR << 16;
if (evt_struct->done)
evt_struct->done(evt_struct);
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 4c4aadb..2046045 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -65,7 +65,8 @@
VIOSRP_VIOLATES_MAX_XFER = 0x2,
VIOSRP_PARTNER_PANIC = 0x3,
VIOSRP_DEVICE_BUSY = 0x8,
- VIOSRP_ADAPTER_FAIL = 0x10
+ VIOSRP_ADAPTER_FAIL = 0x10,
+ VIOSRP_OK2 = 0x99,
};
struct viosrp_crq {
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index cd37bd6..887682a 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -650,7 +650,7 @@
MODULE_DESCRIPTION("Mac ESP SCSI driver");
MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
module_init(mac_esp_init);
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 31f7aec..243d8be 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -5695,13 +5695,12 @@
struct device *osst_member;
int err;
- osst_member = device_create(osst_sysfs_class, device, dev, "%s", name);
+ osst_member = device_create_drvdata(osst_sysfs_class, device, dev, STp, "%s", name);
if (IS_ERR(osst_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return PTR_ERR(osst_member);
}
- dev_set_drvdata(osst_member, STp);
err = device_create_file(osst_member, &dev_attr_ADR_rev);
if (err)
goto err_out;
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 51e2f29..3754ab8 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2811,7 +2811,7 @@
/* Check for room in outstanding command list. */
for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
- ha->outstanding_cmds[cnt] != 0; cnt++);
+ ha->outstanding_cmds[cnt] != NULL; cnt++);
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
status = 1;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 2876908..8dd88fc 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -70,6 +70,9 @@
case 2:
qla2x00_alloc_fw_dump(ha);
break;
+ case 3:
+ qla2x00_system_error(ha);
+ break;
}
return (count);
}
@@ -886,9 +889,13 @@
static void
qla2x00_get_host_port_type(struct Scsi_Host *shost)
{
- scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+ scsi_qla_host_t *ha = shost_priv(shost);
uint32_t port_type = FC_PORTTYPE_UNKNOWN;
+ if (ha->parent) {
+ fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+ return;
+ }
switch (ha->current_topology) {
case ISP_CFG_NL:
port_type = FC_PORTTYPE_LPORT;
@@ -1172,10 +1179,10 @@
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ha->cur_vport_count--;
clear_bit(vha->vp_idx, ha->vp_idx_map);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
kfree(vha->node_name);
kfree(vha->port_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 299eccf..8dd60001 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2457,7 +2457,7 @@
#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct semaphore vport_sem; /* Virtual port synchronization */
+ struct mutex vport_lock; /* Virtual port synchronization */
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f882706..9b4bebe 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,6 +228,9 @@
extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index e9bae27..92fafbd 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -34,7 +34,11 @@
static inline void
qla2x00_poll(scsi_qla_host_t *ha)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
ha->isp_ops->intr_handler(0, ha);
+ local_irq_restore(flags);
}
static __inline__ scsi_qla_host_t *
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5d9a64a..ec63b79 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,8 +272,6 @@
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
- scsi_qla_host_t *vha;
- int i;
/* Setup to process RIO completion. */
handle_cnt = 0;
@@ -544,18 +542,10 @@
break;
case MBA_PORT_UPDATE: /* Port database update */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
+
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
@@ -590,18 +580,12 @@
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Check if the Vport has issued a SCR */
+ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+ break;
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
@@ -1132,25 +1116,6 @@
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
-
- /*
- * In case of a Underrun condition, set both the lscsi
- * status and the completion status to appropriate
- * values.
- */
- if (resid &&
- ((unsigned)(scsi_bufflen(cp) - resid) <
- cp->underflow)) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Mid-layer underflow "
- "detected (%x of %x bytes)...returning "
- "error status.\n", ha->host_no,
- cp->device->channel, cp->device->id,
- cp->device->lun, resid,
- scsi_bufflen(cp)));
-
- cp->result = DID_ERROR << 16 | lscsi_status;
- }
} else {
/*
* If RISC reports underrun and target does not report
@@ -1639,12 +1604,12 @@
ha = dev_id;
reg = &ha->iobase->isp24;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
qla24xx_process_response_queue(ha);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
@@ -1663,7 +1628,7 @@
reg = &ha->iobase->isp24;
status = 0;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
@@ -1716,7 +1681,7 @@
}
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
} while (0);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2100604..250d2f6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2303,8 +2303,6 @@
return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
}
-#if 0
-
int
qla2x00_system_error(scsi_qla_host_t *ha)
{
@@ -2312,7 +2310,7 @@
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
- if (!IS_FWI2_CAPABLE(ha))
+ if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
@@ -2334,8 +2332,6 @@
return rval;
}
-#endif /* 0 */
-
/**
* qla2x00_set_serdes_params() -
* @ha: HA context
@@ -2508,7 +2504,7 @@
if (mb)
memcpy(mb, mcp->mb, 8 * sizeof(*mb));
if (dwords)
- *dwords = mcp->mb[6];
+ *dwords = buffers;
}
return rval;
@@ -2807,9 +2803,9 @@
*/
map = (vp_index - 1) / 8;
pos = (vp_index - 1) & 7;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vce->vp_idx_map[map] |= 1 << pos;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f2b0497..62a3ad6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -32,12 +32,12 @@
scsi_qla_host_t *ha = vha->parent;
/* Find an empty slot and assign an vp_id */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
if (vp_id > ha->max_npiv_vports) {
DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
vp_id, ha->max_npiv_vports));
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -45,7 +45,7 @@
ha->num_vhosts++;
vha->vp_idx = vp_id;
list_add_tail(&vha->vp_list, &ha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -55,12 +55,12 @@
uint16_t vp_id;
scsi_qla_host_t *ha = vha->parent;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = vha->vp_idx;
ha->num_vhosts--;
clear_bit(vp_id, ha->vp_idx_map);
list_del(&vha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
}
static scsi_qla_host_t *
@@ -145,9 +145,9 @@
}
/* Initialize the new vport unless it is a persistent port */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ret = qla24xx_modify_vp_config(vha);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
if (ret != QLA_SUCCESS) {
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
@@ -406,6 +406,7 @@
INIT_LIST_HEAD(&vha->list);
INIT_LIST_HEAD(&vha->fcports);
INIT_LIST_HEAD(&vha->vp_fcports);
+ INIT_LIST_HEAD(&vha->work_list);
vha->dpc_flags = 0L;
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -437,10 +438,10 @@
vha->flags.init_done = 1;
num_hosts++;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
set_bit(vha->vp_idx, ha->vp_idx_map);
ha->cur_vport_count++;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vha;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3223fd1..48eaa3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -10,6 +10,7 @@
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -1631,7 +1632,7 @@
/* load the F/W, read paramaters, and init the H/W */
ha->instance = num_hosts;
- init_MUTEX(&ha->vport_sem);
+ mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
@@ -2156,13 +2157,14 @@
qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
{
unsigned long flags;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
if (!locked)
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ spin_lock_irqsave(&pha->hardware_lock, flags);
list_add_tail(&e->list, &ha->work_list);
qla2xxx_wake_dpc(ha);
if (!locked)
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
return QLA_SUCCESS;
}
@@ -2202,12 +2204,13 @@
qla2x00_do_work(struct scsi_qla_host *ha)
{
struct qla_work_evt *e;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
while (!list_empty(&ha->work_list)) {
e = list_entry(ha->work_list.next, struct qla_work_evt, list);
list_del_init(&e->list);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
switch (e->type) {
case QLA_EVT_AEN:
@@ -2221,9 +2224,9 @@
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
}
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
}
/**************************************************************************
@@ -2634,7 +2637,7 @@
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
@@ -2665,7 +2668,7 @@
blob = &qla_fw_blobs[FW_ISP25XX];
}
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
@@ -2678,7 +2681,7 @@
}
out:
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
return blob;
}
@@ -2687,11 +2690,11 @@
{
int idx;
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
if (qla_fw_blobs[idx].fw)
release_firmware(qla_fw_blobs[idx].fw);
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
@@ -2864,7 +2867,8 @@
return -ENODEV;
}
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+ printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index afeae2b..d058c88 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k2"
+#define QLA2XXX_VERSION "8.02.01-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 049103f..93d2b67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -359,7 +359,12 @@
static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
+
+ if (dev->type != &scsi_dev_type)
+ return 0;
+
+ sdev = to_scsi_device(dev);
add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
return 0;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index c9d7f72..ea0edd1 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1441,17 +1441,18 @@
if (sg_sysfs_valid) {
struct device *sg_class_member;
- sg_class_member = device_create(sg_sysfs_class, cl_dev->parent,
- MKDEV(SCSI_GENERIC_MAJOR,
- sdp->index),
- "%s", disk->disk_name);
+ sg_class_member = device_create_drvdata(sg_sysfs_class,
+ cl_dev->parent,
+ MKDEV(SCSI_GENERIC_MAJOR,
+ sdp->index),
+ sdp,
+ "%s", disk->disk_name);
if (IS_ERR(sg_class_member)) {
printk(KERN_ERR "sg_add: "
"device_create failed\n");
error = PTR_ERR(sg_class_member);
goto cdev_add_err;
}
- dev_set_drvdata(sg_class_member, sdp);
error = sysfs_create_link(&scsidp->sdev_gendev.kobj,
&sg_class_member->kobj, "generic");
if (error)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index e8db66a..6e5a5bb 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4424,17 +4424,19 @@
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
STp->disk->disk_name, st_formats[i]);
st_class_member =
- device_create(st_sysfs_class, &STp->device->sdev_gendev,
- MKDEV(SCSI_TAPE_MAJOR,
- TAPE_MINOR(dev_num, mode, rew)),
- "%s", name);
+ device_create_drvdata(st_sysfs_class,
+ &STp->device->sdev_gendev,
+ MKDEV(SCSI_TAPE_MAJOR,
+ TAPE_MINOR(dev_num,
+ mode, rew)),
+ &STp->modes[mode],
+ "%s", name);
if (IS_ERR(st_class_member)) {
printk(KERN_WARNING "st%d: device_create failed\n",
dev_num);
error = PTR_ERR(st_class_member);
goto out;
}
- dev_set_drvdata(st_class_member, &STp->modes[mode]);
error = device_create_file(st_class_member,
&dev_attr_defined);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1400ea6..1bc00b7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include "8250.h"
@@ -93,6 +92,7 @@
*/
#define CONFIG_HUB6 1
+#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
@@ -1547,8 +1547,6 @@
i->head = &up->list;
spin_unlock_irq(&i->lock);
- irq_flags |= SERIAL_EXTRA_IRQ_FLAGS;
-
ret = request_irq(up->port.irq, serial8250_interrupt,
irq_flags, "serial", i);
if (ret < 0)
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index a10a40c..91bd28f 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -78,8 +78,3 @@
#else
#define ALPHA_KLUDGE_MCR 0
#endif
-
-#ifndef SERIAL_EXTRA_IRQ_FLAGS
-#define SERIAL_EXTRA_IRQ_FLAGS 0
-#endif
-
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53fa19c..788c3559 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2602,7 +2602,12 @@
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
pbn_b2_2_115200 },
-
+ /*
+ * IntaShield IS-400
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
*/
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index eab0327..c9b64e7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -2054,6 +2063,8 @@
int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct device *tty_dev;
+ struct uart_match match = {port, drv};
mutex_lock(&state->mutex);
@@ -2063,7 +2074,8 @@
return 0;
}
- if (!port->suspended) {
+ tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ if (!port->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(port->irq);
mutex_unlock(&state->mutex);
return 0;
@@ -2285,6 +2297,7 @@
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index b3518ca..41620c0 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -68,6 +68,7 @@
struct spidev_data {
struct device dev;
+ spinlock_t spi_lock;
struct spi_device *spi;
struct list_head device_entry;
@@ -85,12 +86,75 @@
/*-------------------------------------------------------------------------*/
+/*
+ * We can't use the standard synchronous wrappers for file I/O; we
+ * need to protect against async removal of the underlying spi_device.
+ */
+static void spidev_complete(void *arg)
+{
+ complete(arg);
+}
+
+static ssize_t
+spidev_sync(struct spidev_data *spidev, struct spi_message *message)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+ int status;
+
+ message->complete = spidev_complete;
+ message->context = &done;
+
+ spin_lock_irq(&spidev->spi_lock);
+ if (spidev->spi == NULL)
+ status = -ESHUTDOWN;
+ else
+ status = spi_async(spidev->spi, message);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (status == 0) {
+ wait_for_completion(&done);
+ status = message->status;
+ if (status == 0)
+ status = message->actual_length;
+ }
+ return status;
+}
+
+static inline ssize_t
+spidev_sync_write(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .tx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+static inline ssize_t
+spidev_sync_read(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .rx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+/*-------------------------------------------------------------------------*/
+
/* Read-only message with current device setup */
static ssize_t
spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
/* chipselect only toggles at start or end of operation */
@@ -98,10 +162,9 @@
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
- status = spi_read(spi, spidev->buffer, count);
+ status = spidev_sync_read(spidev, count);
if (status == 0) {
unsigned long missing;
@@ -122,7 +185,6 @@
size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
unsigned long missing;
@@ -131,12 +193,11 @@
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
- status = spi_write(spi, spidev->buffer, count);
+ status = spidev_sync_write(spidev, count);
if (status == 0)
status = count;
} else
@@ -153,7 +214,6 @@
struct spi_transfer *k_xfers;
struct spi_transfer *k_tmp;
struct spi_ioc_transfer *u_tmp;
- struct spi_device *spi = spidev->spi;
unsigned n, total;
u8 *buf;
int status = -EFAULT;
@@ -215,7 +275,7 @@
spi_message_add_tail(k_tmp, &msg);
}
- status = spi_sync(spi, &msg);
+ status = spidev_sync(spidev, &msg);
if (status < 0)
goto done;
@@ -269,8 +329,16 @@
if (err)
return -EFAULT;
+ /* guard against device removal before, or while,
+ * we issue this ioctl.
+ */
spidev = filp->private_data;
- spi = spidev->spi;
+ spin_lock_irq(&spidev->spi_lock);
+ spi = spi_dev_get(spidev->spi);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (spi == NULL)
+ return -ESHUTDOWN;
switch (cmd) {
/* read requests */
@@ -356,8 +424,10 @@
default:
/* segmented and/or full-duplex I/O request */
if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
- || _IOC_DIR(cmd) != _IOC_WRITE)
- return -ENOTTY;
+ || _IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -ENOTTY;
+ break;
+ }
tmp = _IOC_SIZE(cmd);
if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
@@ -385,6 +455,7 @@
kfree(ioc);
break;
}
+ spi_dev_put(spi);
return retval;
}
@@ -488,6 +559,7 @@
/* Initialize the driver data */
spidev->spi = spi;
+ spin_lock_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
@@ -526,13 +598,17 @@
{
struct spidev_data *spidev = dev_get_drvdata(&spi->dev);
- mutex_lock(&device_list_lock);
+ /* make sure ops on existing fds can abort cleanly */
+ spin_lock_irq(&spidev->spi_lock);
+ spidev->spi = NULL;
+ spin_unlock_irq(&spidev->spi_lock);
+ /* prevent new opens */
+ mutex_lock(&device_list_lock);
list_del(&spidev->device_entry);
dev_set_drvdata(&spi->dev, NULL);
clear_bit(MINOR(spidev->dev.devt), minors);
device_unregister(&spidev->dev);
-
mutex_unlock(&device_list_lock);
return 0;
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 55cc7b8..0a12e90 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -649,15 +649,14 @@
if (ret)
goto err_get_minor;
- idev->dev = device_create(uio_class->class, parent,
- MKDEV(uio_major, idev->minor),
- "uio%d", idev->minor);
+ idev->dev = device_create_drvdata(uio_class->class, parent,
+ MKDEV(uio_major, idev->minor), idev,
+ "uio%d", idev->minor);
if (IS_ERR(idev->dev)) {
printk(KERN_ERR "UIO: device register failed\n");
ret = PTR_ERR(idev->dev);
goto err_device_create;
}
- dev_set_drvdata(idev->dev, idev);
ret = uio_dev_add_attributes(idev);
if (ret)
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index 5100fbb..a9636f4 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -120,7 +120,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -129,7 +129,7 @@
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+ hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -138,7 +138,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -146,7 +146,7 @@
spin_lock_irqsave(&dev->hpi.lock, flags);
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+ *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -425,7 +425,7 @@
len--;
}
- hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
@@ -456,7 +456,7 @@
len--;
}
- hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 3a9102d..66f17ed 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -29,3 +29,14 @@
To compile this driver as a module, choose M here: the
module will be called usblp.
+config USB_WDM
+ tristate "USB Wireless Device Management support"
+ depends on USB
+ ---help---
+ This driver supports the WMC Device Management functionality
+ of cell phones compliant to the CDC WMC specification. You can use
+ AT commands over this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdc-wdm.
+
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index cc391e6..535d59a 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
+obj-$(CONFIG_USB_WDM) += cdc-wdm.o
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
new file mode 100644
index 0000000..731db05
--- /dev/null
+++ b/drivers/usb/class/cdc-wdm.c
@@ -0,0 +1,740 @@
+/*
+ * cdc-wdm.c
+ *
+ * This driver supports USB CDC WCM Device Management.
+ *
+ * Copyright (c) 2007-2008 Oliver Neukum
+ *
+ * Some code taken from cdc-acm.c
+ *
+ * Released under the GPLv2.
+ *
+ * Many thanks to Carl Nordbeck
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.02"
+#define DRIVER_AUTHOR "Oliver Neukum"
+
+static struct usb_device_id wdm_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
+ },
+ { }
+};
+
+#define WDM_MINOR_BASE 176
+
+
+#define WDM_IN_USE 1
+#define WDM_DISCONNECTING 2
+#define WDM_RESULT 3
+#define WDM_READ 4
+#define WDM_INT_STALL 5
+#define WDM_POLL_RUNNING 6
+
+
+#define WDM_MAX 16
+
+
+static DEFINE_MUTEX(wdm_mutex);
+
+/* --- method tables --- */
+
+struct wdm_device {
+ u8 *inbuf; /* buffer for response */
+ u8 *outbuf; /* buffer for command */
+ u8 *sbuf; /* buffer for status */
+ u8 *ubuf; /* buffer for copy to user space */
+
+ struct urb *command;
+ struct urb *response;
+ struct urb *validity;
+ struct usb_interface *intf;
+ struct usb_ctrlrequest *orq;
+ struct usb_ctrlrequest *irq;
+ spinlock_t iuspin;
+
+ unsigned long flags;
+ u16 bufsize;
+ u16 wMaxCommand;
+ u16 wMaxPacketSize;
+ u16 bMaxPacketSize0;
+ __le16 inum;
+ int reslength;
+ int length;
+ int read;
+ int count;
+ dma_addr_t shandle;
+ dma_addr_t ihandle;
+ struct mutex wlock;
+ struct mutex rlock;
+ wait_queue_head_t wait;
+ struct work_struct rxwork;
+ int werr;
+ int rerr;
+};
+
+static struct usb_driver wdm_driver;
+
+/* --- callbacks --- */
+static void wdm_out_callback(struct urb *urb)
+{
+ struct wdm_device *desc;
+ desc = urb->context;
+ spin_lock(&desc->iuspin);
+ desc->werr = urb->status;
+ spin_unlock(&desc->iuspin);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ kfree(desc->outbuf);
+ wake_up(&desc->wait);
+}
+
+static void wdm_in_callback(struct urb *urb)
+{
+ struct wdm_device *desc = urb->context;
+ int status = urb->status;
+
+ spin_lock(&desc->iuspin);
+
+ if (status) {
+ switch (status) {
+ case -ENOENT:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ENOENT");
+ break;
+ case -ECONNRESET:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ECONNRESET");
+ break;
+ case -ESHUTDOWN:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ESHUTDOWN");
+ break;
+ case -EPIPE:
+ err("nonzero urb status received: -EPIPE");
+ break;
+ default:
+ err("Unexpected error %d", status);
+ break;
+ }
+ }
+
+ desc->rerr = status;
+ desc->reslength = urb->actual_length;
+ memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
+ desc->length += desc->reslength;
+ wake_up(&desc->wait);
+
+ set_bit(WDM_READ, &desc->flags);
+ spin_unlock(&desc->iuspin);
+}
+
+static void wdm_int_callback(struct urb *urb)
+{
+ int rv = 0;
+ int status = urb->status;
+ struct wdm_device *desc;
+ struct usb_ctrlrequest *req;
+ struct usb_cdc_notification *dr;
+
+ desc = urb->context;
+ req = desc->irq;
+ dr = (struct usb_cdc_notification *)desc->sbuf;
+
+ if (status) {
+ switch (status) {
+ case -ESHUTDOWN:
+ case -ENOENT:
+ case -ECONNRESET:
+ return; /* unplug */
+ case -EPIPE:
+ set_bit(WDM_INT_STALL, &desc->flags);
+ err("Stall on int endpoint");
+ goto sw; /* halt is cleared in work */
+ default:
+ err("nonzero urb status received: %d", status);
+ break;
+ }
+ }
+
+ if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
+ err("wdm_int_callback - %d bytes", urb->actual_length);
+ goto exit;
+ }
+
+ switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
+ dr->wIndex, dr->wLength);
+ break;
+
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_NETWORK_CONNECTION %s network",
+ dr->wValue ? "connected to" : "disconnected from");
+ goto exit;
+ default:
+ clear_bit(WDM_POLL_RUNNING, &desc->flags);
+ err("unknown notification %d received: index %d len %d",
+ dr->bNotificationType, dr->wIndex, dr->wLength);
+ goto exit;
+ }
+
+ req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(desc->bMaxPacketSize0);
+
+ usb_fill_control_urb(
+ desc->response,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ desc->inbuf,
+ desc->bMaxPacketSize0,
+ wdm_in_callback,
+ desc
+ );
+ desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ spin_lock(&desc->iuspin);
+ clear_bit(WDM_READ, &desc->flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
+ dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
+ __func__, rv);
+ }
+ spin_unlock(&desc->iuspin);
+ if (rv < 0) {
+ if (rv == -EPERM)
+ return;
+ if (rv == -ENOMEM) {
+sw:
+ rv = schedule_work(&desc->rxwork);
+ if (rv)
+ err("Cannot schedule work");
+ }
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv)
+ err("%s - usb_submit_urb failed with result %d",
+ __func__, rv);
+
+}
+
+static void kill_urbs(struct wdm_device *desc)
+{
+ usb_kill_urb(desc->command);
+ usb_kill_urb(desc->validity);
+ usb_kill_urb(desc->response);
+}
+
+static void free_urbs(struct wdm_device *desc)
+{
+ usb_free_urb(desc->validity);
+ usb_free_urb(desc->response);
+ usb_free_urb(desc->command);
+}
+
+static void cleanup(struct wdm_device *desc)
+{
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->inbuf,
+ desc->response->transfer_dma);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc->ubuf);
+ free_urbs(desc);
+ kfree(desc);
+}
+
+static ssize_t wdm_write
+(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ u8 *buf;
+ int rv = -EMSGSIZE, r, we;
+ struct wdm_device *desc = file->private_data;
+ struct usb_ctrlrequest *req;
+
+ if (count > desc->wMaxCommand)
+ count = desc->wMaxCommand;
+
+ spin_lock_irq(&desc->iuspin);
+ we = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ if (we < 0)
+ return -EIO;
+
+ r = mutex_lock_interruptible(&desc->wlock); /* concurrent writes */
+ rv = -ERESTARTSYS;
+ if (r)
+ goto outnl;
+
+ r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+ &desc->flags));
+ if (r < 0)
+ goto out;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+
+ desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ if (!buf) {
+ rv = -ENOMEM;
+ goto out;
+ }
+
+ r = copy_from_user(buf, buffer, count);
+ if (r > 0) {
+ kfree(buf);
+ rv = -EFAULT;
+ goto out;
+ }
+
+ req = desc->orq;
+ usb_fill_control_urb(
+ desc->command,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ buf,
+ count,
+ wdm_out_callback,
+ desc
+ );
+
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(count);
+ set_bit(WDM_IN_USE, &desc->flags);
+
+ rv = usb_submit_urb(desc->command, GFP_KERNEL);
+ if (rv < 0) {
+ kfree(buf);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ } else {
+ dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
+ req->wIndex);
+ }
+out:
+ mutex_unlock(&desc->wlock);
+outnl:
+ return rv < 0 ? rv : count;
+}
+
+static ssize_t wdm_read
+(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+ int rv, cntr;
+ int i = 0;
+ struct wdm_device *desc = file->private_data;
+
+
+ rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+ if (rv < 0)
+ return -ERESTARTSYS;
+
+ if (desc->length == 0) {
+ desc->read = 0;
+retry:
+ i++;
+ rv = wait_event_interruptible(desc->wait,
+ test_bit(WDM_READ, &desc->flags));
+
+ if (rv < 0) {
+ rv = -ERESTARTSYS;
+ goto err;
+ }
+
+ spin_lock_irq(&desc->iuspin);
+
+ if (desc->rerr) { /* read completed, error happened */
+ int t = desc->rerr;
+ desc->rerr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ err("reading had resulted in %d", t);
+ rv = -EIO;
+ goto err;
+ }
+ /*
+ * recheck whether we've lost the race
+ * against the completion handler
+ */
+ if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ if (!desc->reslength) { /* zero length read */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ clear_bit(WDM_READ, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ }
+
+ cntr = count > desc->length ? desc->length : count;
+ rv = copy_to_user(buffer, desc->ubuf, cntr);
+ if (rv > 0) {
+ rv = -EFAULT;
+ goto err;
+ }
+
+ for (i = 0; i < desc->length - cntr; i++)
+ desc->ubuf[i] = desc->ubuf[i + cntr];
+
+ desc->length -= cntr;
+ rv = cntr;
+
+err:
+ mutex_unlock(&desc->rlock);
+ if (rv < 0)
+ err("wdm_read: exit error");
+ return rv;
+}
+
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ struct wdm_device *desc = file->private_data;
+
+ wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags));
+ if (desc->werr < 0)
+ err("Error in flush path: %d", desc->werr);
+
+ return desc->werr;
+}
+
+static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct wdm_device *desc = file->private_data;
+ unsigned long flags;
+ unsigned int mask = 0;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ mask = POLLERR;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ goto desc_out;
+ }
+ if (test_bit(WDM_READ, &desc->flags))
+ mask = POLLIN | POLLRDNORM;
+ if (desc->rerr || desc->werr)
+ mask |= POLLERR;
+ if (!test_bit(WDM_IN_USE, &desc->flags))
+ mask |= POLLOUT | POLLWRNORM;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+
+ poll_wait(file, &desc->wait, wait);
+
+desc_out:
+ return mask;
+}
+
+static int wdm_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ int rv = -ENODEV;
+ struct usb_interface *intf;
+ struct wdm_device *desc;
+
+ mutex_lock(&wdm_mutex);
+ intf = usb_find_interface(&wdm_driver, minor);
+ if (!intf)
+ goto out;
+
+ desc = usb_get_intfdata(intf);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ goto out;
+
+ desc->count++;
+ file->private_data = desc;
+
+ rv = usb_submit_urb(desc->validity, GFP_KERNEL);
+
+ if (rv < 0) {
+ desc->count--;
+ err("Error submitting int urb - %d", rv);
+ goto out;
+ }
+ rv = 0;
+
+out:
+ mutex_unlock(&wdm_mutex);
+ return rv;
+}
+
+static int wdm_release(struct inode *inode, struct file *file)
+{
+ struct wdm_device *desc = file->private_data;
+
+ mutex_lock(&wdm_mutex);
+ desc->count--;
+ if (!desc->count) {
+ dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+ kill_urbs(desc);
+ }
+ mutex_unlock(&wdm_mutex);
+ return 0;
+}
+
+static const struct file_operations wdm_fops = {
+ .owner = THIS_MODULE,
+ .read = wdm_read,
+ .write = wdm_write,
+ .open = wdm_open,
+ .flush = wdm_flush,
+ .release = wdm_release,
+ .poll = wdm_poll
+};
+
+static struct usb_class_driver wdm_class = {
+ .name = "cdc-wdm%d",
+ .fops = &wdm_fops,
+ .minor_base = WDM_MINOR_BASE,
+};
+
+/* --- error handling --- */
+static void wdm_rxwork(struct work_struct *work)
+{
+ struct wdm_device *desc = container_of(work, struct wdm_device, rxwork);
+ unsigned long flags;
+ int rv;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ } else {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ if (rv < 0 && rv != -EPERM) {
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ schedule_work(&desc->rxwork);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ }
+ }
+}
+
+/* --- hotplug --- */
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int rv = -EINVAL;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct wdm_device *desc;
+ struct usb_host_interface *iface;
+ struct usb_endpoint_descriptor *ep;
+ struct usb_cdc_dmm_desc *dmhd;
+ u8 *buffer = intf->altsetting->extra;
+ int buflen = intf->altsetting->extralen;
+ u16 maxcom = 0;
+
+ if (!buffer)
+ goto out;
+
+ while (buflen > 0) {
+ if (buffer [1] != USB_DT_CS_INTERFACE) {
+ err("skipping garbage");
+ goto next_desc;
+ }
+
+ switch (buffer [2]) {
+ case USB_CDC_HEADER_TYPE:
+ break;
+ case USB_CDC_DMM_TYPE:
+ dmhd = (struct usb_cdc_dmm_desc *)buffer;
+ maxcom = le16_to_cpu(dmhd->wMaxCommand);
+ dev_dbg(&intf->dev,
+ "Finding maximum buffer length: %d", maxcom);
+ break;
+ default:
+ err("Ignoring extra header, type %d, length %d",
+ buffer[2], buffer[0]);
+ break;
+ }
+next_desc:
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ rv = -ENOMEM;
+ desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
+ if (!desc)
+ goto out;
+ mutex_init(&desc->wlock);
+ mutex_init(&desc->rlock);
+ spin_lock_init(&desc->iuspin);
+ init_waitqueue_head(&desc->wait);
+ desc->wMaxCommand = maxcom;
+ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
+ desc->intf = intf;
+ INIT_WORK(&desc->rxwork, wdm_rxwork);
+
+ iface = &intf->altsetting[0];
+ ep = &iface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(ep)) {
+ rv = -EINVAL;
+ goto err;
+ }
+
+ desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+ desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
+
+ desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->orq)
+ goto err;
+ desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->irq)
+ goto err;
+
+ desc->validity = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->validity)
+ goto err;
+
+ desc->response = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->response)
+ goto err;
+
+ desc->command = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->command)
+ goto err;
+
+ desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+ if (!desc->ubuf)
+ goto err;
+
+ desc->sbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->wMaxPacketSize,
+ GFP_KERNEL,
+ &desc->validity->transfer_dma);
+ if (!desc->sbuf)
+ goto err;
+
+ desc->inbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->bMaxPacketSize0,
+ GFP_KERNEL,
+ &desc->response->transfer_dma);
+ if (!desc->inbuf)
+ goto err2;
+
+ usb_fill_int_urb(
+ desc->validity,
+ interface_to_usbdev(intf),
+ usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress),
+ desc->sbuf,
+ desc->wMaxPacketSize,
+ wdm_int_callback,
+ desc,
+ ep->bInterval
+ );
+ desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, desc);
+ rv = usb_register_dev(intf, &wdm_class);
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
+ if (rv < 0)
+ goto err;
+out:
+ return rv;
+err2:
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+err:
+ free_urbs(desc);
+ kfree(desc->ubuf);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc);
+ return rv;
+}
+
+static void wdm_disconnect(struct usb_interface *intf)
+{
+ struct wdm_device *desc;
+ unsigned long flags;
+
+ usb_deregister_dev(intf, &wdm_class);
+ mutex_lock(&wdm_mutex);
+ desc = usb_get_intfdata(intf);
+
+ /* the spinlock makes sure no new urbs are generated in the callbacks */
+ spin_lock_irqsave(&desc->iuspin, flags);
+ set_bit(WDM_DISCONNECTING, &desc->flags);
+ set_bit(WDM_READ, &desc->flags);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ cancel_work_sync(&desc->rxwork);
+ kill_urbs(desc);
+ wake_up_all(&desc->wait);
+ if (!desc->count)
+ cleanup(desc);
+ mutex_unlock(&wdm_mutex);
+}
+
+static struct usb_driver wdm_driver = {
+ .name = "cdc_wdm",
+ .probe = wdm_probe,
+ .disconnect = wdm_disconnect,
+ .id_table = wdm_ids,
+};
+
+/* --- low level module stuff --- */
+
+static int __init wdm_init(void)
+{
+ int rv;
+
+ rv = usb_register(&wdm_driver);
+
+ return rv;
+}
+
+static void __exit wdm_exit(void)
+{
+ usb_deregister(&wdm_driver);
+}
+
+module_init(wdm_init);
+module_exit(wdm_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION("USB Abstract Control Model driver for "
+ "USB WCM Device Management");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index c1cb94e..7e912f2 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -155,9 +155,6 @@
{
int err, c;
- /* put device-specific files into sysfs */
- usb_create_sysfs_dev_files(udev);
-
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
@@ -189,8 +186,6 @@
* unconfigure the device */
if (udev->actconfig)
usb_set_configuration(udev, -1);
-
- usb_remove_sysfs_dev_files(udev);
}
#ifdef CONFIG_PM
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bf10e9c..09a53e7 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -818,12 +818,12 @@
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
- "usb_host%d", busnum);
+ bus->dev = device_create_drvdata(usb_host_class, bus->controller,
+ MKDEV(0, 0), bus,
+ "usb_host%d", busnum);
result = PTR_ERR(bus->dev);
if (IS_ERR(bus->dev))
goto error_create_class_dev;
- dev_set_drvdata(bus->dev, bus);
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 1e4b81e..a0bf5df 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -213,6 +213,8 @@
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
+ /* has a port been handed over to a companion? */
+ int (*port_handed_over)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index eb57fcc..8eb4da3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1326,6 +1326,12 @@
usb_unlock_device(udev);
+ /* Remove the device-specific files from sysfs. This must be
+ * done with udev unlocked, because some of the attribute
+ * routines try to acquire the device lock.
+ */
+ usb_remove_sysfs_dev_files(udev);
+
/* Unregister the device. The device driver is responsible
* for removing the device files from usbfs and sysfs and for
* de-configuring the device.
@@ -1541,6 +1547,9 @@
goto fail;
}
+ /* put device-specific files into sysfs */
+ usb_create_sysfs_dev_files(udev);
+
/* Tell the world! */
announce_device(udev);
return err;
@@ -2744,7 +2753,11 @@
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
}
- dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1);
+ if (hub->hdev->parent ||
+ !hcd->driver->port_handed_over ||
+ !(hcd->driver->port_handed_over)(hcd, port1))
+ dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
+ port1);
done:
hub_port_disable(hub, port1, 1);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2e20193..3da1ab4 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,10 @@
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Avision AV600U */
+ { USB_DEVICE(0x0638, 0x0a13), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index c783cb1..5e1f5d5 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -588,35 +588,33 @@
container_of(kobj, struct device, kobj));
size_t nleft = count;
size_t srclen, n;
+ int cfgno;
+ void *src;
- usb_lock_device(udev);
-
- /* The binary attribute begins with the device descriptor */
- srclen = sizeof(struct usb_device_descriptor);
- if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + (char *) &udev->descriptor, n);
- nleft -= n;
- buf += n;
- off = 0;
- } else {
- off -= srclen;
- }
-
- /* Then follows the raw descriptor entry for the current
- * configuration (config plus subsidiary descriptors).
+ /* The binary attribute begins with the device descriptor.
+ * Following that are the raw descriptor entries for all the
+ * configurations (config plus subsidiary descriptors).
*/
- if (udev->actconfig) {
- int cfgno = udev->actconfig - udev->config;
-
- srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength);
+ for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+ nleft > 0; ++cfgno) {
+ if (cfgno < 0) {
+ src = &udev->descriptor;
+ srclen = sizeof(struct usb_device_descriptor);
+ } else {
+ src = udev->rawdescriptors[cfgno];
+ srclen = __le16_to_cpu(udev->config[cfgno].desc.
+ wTotalLength);
+ }
if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + udev->rawdescriptors[cfgno], n);
+ n = min(nleft, srclen - (size_t) off);
+ memcpy(buf, src + off, n);
nleft -= n;
+ buf += n;
+ off = 0;
+ } else {
+ off -= srclen;
}
}
- usb_unlock_device(udev);
return count - nleft;
}
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 651b827..1868754 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1627,7 +1627,9 @@
udc_reset_ep_queue(udc, pipe);
/* report disconnect; the driver is already quiesced */
+ spin_unlock(&udc->lock);
udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
return 0;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 499b7a2..e02bfd4 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1526,7 +1526,8 @@
ep0_idle(udc);
udc->gadget.speed = USB_SPEED_UNKNOWN;
- udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+ if (udc->mach->udc_command)
+ udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
/**
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 8b5f991..08a4335 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -223,6 +223,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6d9bed6..7370d61 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -269,7 +269,7 @@
if (retval)
return retval;
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
@@ -295,10 +295,6 @@
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -322,6 +318,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 382587c..740835b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -609,7 +609,7 @@
}
break;
case USB_PORT_FEAT_C_SUSPEND:
- /* we auto-clear this feature */
+ clear_bit(wIndex, &ehci->port_c_suspend);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
@@ -688,7 +688,7 @@
/* resume completed? */
else if (time_after_eq(jiffies,
ehci->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ set_bit(wIndex, &ehci->port_c_suspend);
ehci->reset_done[wIndex] = 0;
/* stop resume signaling */
@@ -765,6 +765,8 @@
status |= 1 << USB_PORT_FEAT_RESET;
if (temp & PORT_POWER)
status |= 1 << USB_PORT_FEAT_POWER;
+ if (test_bit(wIndex, &ehci->port_c_suspend))
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
#ifndef VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
@@ -875,3 +877,13 @@
set_owner(ehci, --portnum, PORT_OWNER);
}
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *reg;
+
+ if (ehci_is_TDI(ehci))
+ return 0;
+ reg = &ehci->regs->port_status[portnum - 1];
+ return ehci_readl(ehci, reg) & PORT_OWNER;
+}
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 601c879..9d042f2 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -26,7 +26,7 @@
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci_reset(ehci);
retval = ehci_init(hcd);
@@ -58,6 +58,8 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index d187d03..ab625f0 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -115,6 +115,8 @@
if (retval)
return retval;
+ hcd->has_tt = 1;
+
ehci_reset(ehci);
ehci_port_power(ehci, 0);
@@ -137,10 +139,6 @@
*/
.reset = ehci_orion_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -163,6 +161,8 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static void __init
@@ -248,7 +248,7 @@
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
/*
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5bb7f6b..c46a58f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -129,7 +129,6 @@
switch (pdev->vendor) {
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
hcd->has_tt = 1;
tdi_reset(ehci);
}
@@ -379,7 +378,8 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ee305b1..b018dee 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -76,6 +76,8 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index 6c76036..529590e 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -163,6 +163,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 6978222..37e6abe 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -73,6 +73,7 @@
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index be575e4..b7853c8 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1349,18 +1349,27 @@
/* when's the last uframe this urb could start? */
max = now + mod;
- /* typical case: reuse current schedule. stream is still active,
- * and no gaps from host falling behind (irq delays etc)
+ /* Typical case: reuse current schedule, stream is still active.
+ * Hopefully there are no gaps from the host falling behind
+ * (irq delays etc), but if there are we'll take the next
+ * slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
start = stream->next_uframe;
if (start < now)
start += mod;
- if (likely ((start + sched->span) < max))
- goto ready;
- /* else fell behind; someday, try to reschedule */
- status = -EL2NSYNC;
- goto fail;
+
+ /* Fell behind (by up to twice the slop amount)? */
+ if (start >= max - 2 * 8 * SCHEDULE_SLOP)
+ start += stream->interval * DIV_ROUND_UP(
+ max - start, stream->interval) - mod;
+
+ /* Tried to schedule too far into the future? */
+ if (unlikely((start + sched->span) >= max)) {
+ status = -EFBIG;
+ goto fail;
+ }
+ goto ready;
}
/* need to schedule; when's the next (u)frame we could start?
@@ -1613,6 +1622,9 @@
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
desc->actual_length = EHCI_ITD_LENGTH (t);
+ } else {
+ /* URB was too late */
+ desc->status = -EXDEV;
}
}
@@ -2095,7 +2107,7 @@
static void
scan_periodic (struct ehci_hcd *ehci)
{
- unsigned frame, clock, now_uframe, mod;
+ unsigned now_uframe, frame, clock, clock_frame, mod;
unsigned modified;
mod = ehci->periodic_size << 3;
@@ -2111,6 +2123,7 @@
else
clock = now_uframe + mod - 1;
clock %= mod;
+ clock_frame = clock >> 3;
for (;;) {
union ehci_shadow q, *q_p;
@@ -2157,22 +2170,26 @@
case Q_TYPE_ITD:
/* If this ITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- rmb ();
- for (uf = 0; uf < 8 && live; uf++) {
- if (0 == (q.itd->hw_transaction [uf]
- & ITD_ACTIVE(ehci)))
- continue;
- incomplete = true;
- q_p = &q.itd->itd_next;
- hw_p = &q.itd->hw_next;
- type = Q_NEXT_TYPE(ehci,
+ if (frame == clock_frame && live) {
+ rmb();
+ for (uf = 0; uf < 8; uf++) {
+ if (q.itd->hw_transaction[uf] &
+ ITD_ACTIVE(ehci))
+ break;
+ }
+ if (uf < 8) {
+ incomplete = true;
+ q_p = &q.itd->itd_next;
+ hw_p = &q.itd->hw_next;
+ type = Q_NEXT_TYPE(ehci,
q.itd->hw_next);
- q = *q_p;
- break;
+ q = *q_p;
+ break;
+ }
}
- if (uf < 8 && live)
- break;
/* Take finished ITDs out of the schedule
* and process them: recycle, maybe report
@@ -2189,9 +2206,12 @@
case Q_TYPE_SITD:
/* If this SITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- if ((q.sitd->hw_results & SITD_ACTIVE(ehci))
- && live) {
+ if (frame == clock_frame && live &&
+ (q.sitd->hw_results &
+ SITD_ACTIVE(ehci))) {
incomplete = true;
q_p = &q.sitd->sitd_next;
hw_p = &q.sitd->hw_next;
@@ -2260,6 +2280,7 @@
/* rescan the rest of this frame, then ... */
clock = now;
+ clock_frame = clock >> 3;
} else {
now_uframe++;
now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bf92d20..35a0309 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,8 @@
dedicated to the companion controller */
unsigned long owned_ports; /* which ports are
owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
@@ -112,7 +114,6 @@
u32 command;
/* SILICON QUIRKS */
- unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
@@ -678,7 +679,7 @@
* needed (mostly in root hub code).
*/
-#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
+#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
/* Returns the speed of a device attached to a port on the root hub. */
static inline unsigned int
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 440bf94..c9db3fe 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@
static u32 iolength;
static u32 pci_mem_phy0;
static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
static int __devinit isp1761_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a53db1d..eb6c069 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -269,3 +269,14 @@
See <http://www.linux-usb.org/usbtest/> for more information,
including sample test device firmware and "how to use it".
+config USB_ISIGHTFW
+ tristate "iSight firmware loading support"
+ depends on USB
+ help
+ This driver loads firmware for USB Apple iSight cameras, allowing
+ them to be driven by the USB video class driver available at
+ http://linux-uvc.berlios.de
+
+ The firmware for this driver must be extracted from the MacOS
+ driver beforehand. Tools for doing so are available at
+ http://bersace03.free.fr
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index b68e6b7..aba091c 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
new file mode 100644
index 0000000..390e048
--- /dev/null
+++ b/drivers/usb/misc/isight_firmware.c
@@ -0,0 +1,131 @@
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(0x05ac, 0x8300)},
+ {},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int llen, len, req, ret = 0;
+ const struct firmware *firmware;
+ unsigned char *buf;
+ unsigned char data[4];
+ char *ptr;
+
+ if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+ printk(KERN_ERR "Unable to load isight firmware\n");
+ return -ENODEV;
+ }
+
+ ptr = firmware->data;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+ 300) != 1) {
+ printk(KERN_ERR
+ "Failed to initialise isight firmware loader\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ while (1) {
+ memcpy(data, ptr, 4);
+ len = (data[0] << 8 | data[1]);
+ req = (data[2] << 8 | data[3]);
+ ptr += 4;
+
+ if (len == 0x8001)
+ break; /* success */
+ else if (len == 0)
+ continue;
+
+ for (; len > 0; req += 50) {
+ llen = len > 50 ? 50 : len;
+ len -= llen;
+
+ buf = kmalloc(llen, GFP_KERNEL);
+ memcpy(buf, ptr, llen);
+
+ ptr += llen;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+ buf, llen, 300) != llen) {
+ printk(KERN_ERR
+ "Failed to load isight firmware\n");
+ kfree(buf);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ kfree(buf);
+ }
+ }
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+ 300) != 1) {
+ printk(KERN_ERR "isight firmware loading completion failed\n");
+ ret = -ENODEV;
+ }
+out:
+ release_firmware(firmware);
+ return ret;
+}
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+ .name = "isight_firmware",
+ .probe = isight_firmware_load,
+ .disconnect = isight_firmware_disconnect,
+ .id_table = id_table,
+};
+
+static int __init isight_firmware_init(void)
+{
+ return usb_register(&isight_firmware_driver);
+}
+
+static void __exit isight_firmware_exit(void)
+{
+ usb_deregister(&isight_firmware_driver);
+}
+
+module_init(isight_firmware_init);
+module_exit(isight_firmware_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index 24230c6..4cfa25b 100644
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -595,14 +595,14 @@
} while(value);
kit->dev_no = bit;
- kit->dev = device_create(phidget_class, &kit->udev->dev, 0,
- "interfacekit%d", kit->dev_no);
+ kit->dev = device_create_drvdata(phidget_class, &kit->udev->dev,
+ MKDEV(0, 0), kit,
+ "interfacekit%d", kit->dev_no);
if (IS_ERR(kit->dev)) {
rc = PTR_ERR(kit->dev);
kit->dev = NULL;
goto out;
}
- dev_set_drvdata(kit->dev, kit);
if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
rc = -EIO;
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
index f0113c1..9b4696f 100644
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -365,16 +365,15 @@
} while(value);
mc->dev_no = bit;
- mc->dev = device_create(phidget_class, &mc->udev->dev, 0,
- "motorcontrol%d", mc->dev_no);
+ mc->dev = device_create_drvdata(phidget_class, &mc->udev->dev,
+ MKDEV(0, 0), mc,
+ "motorcontrol%d", mc->dev_no);
if (IS_ERR(mc->dev)) {
rc = PTR_ERR(mc->dev);
mc->dev = NULL;
goto out;
}
- dev_set_drvdata(mc->dev, mc);
-
if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
rc = -EIO;
goto out;
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index 7d590c0..1ca7ddb 100644
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -275,14 +275,14 @@
} while (value);
dev->dev_no = bit;
- dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
- "servo%d", dev->dev_no);
+ dev->dev = device_create_drvdata(phidget_class, &dev->udev->dev,
+ MKDEV(0, 0), dev,
+ "servo%d", dev->dev_no);
if (IS_ERR(dev->dev)) {
rc = PTR_ERR(dev->dev);
dev->dev = NULL;
goto out;
}
- dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ba28fdc..1f7c86b 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -28,6 +28,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x1a86, 0x7523) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5b349ec..5234e7a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -174,8 +174,270 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
- { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -374,6 +636,7 @@
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 504edf8..06e0eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -114,11 +114,268 @@
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/*
- * The following are the values for the Matrix Orbital VK204-25-USB
- * display, which use the FT232RL.
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
*/
-#define MTXORB_VK_VID 0x1b3d
-#define MTXORB_VK_PID 0x0158
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
@@ -592,6 +849,12 @@
#define FIC_NEO1973_DEBUG_PID 0x5118
/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e7e016e..43cfde8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -183,6 +183,7 @@
#define AXESSTEL_PRODUCT_MV110H 0x1000
#define ONDA_VENDOR_ID 0x19d2
+#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
#define BANDRICH_VENDOR_ID 0x1A8D
@@ -196,6 +197,9 @@
#define MAXON_VENDOR_ID 0x16d8
+#define TELIT_VENDOR_ID 0x1bc7
+#define TELIT_PRODUCT_UC864E 0x1003
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -232,25 +236,25 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
@@ -297,13 +301,14 @@
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
- { USB_DEVICE(0x19d2, 0x0001) }, /* Telstra NextG CDMA */
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index c605fb6..103195a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -56,6 +56,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -66,7 +67,6 @@
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
- { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 10cf872..cff160a 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -14,6 +14,7 @@
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
+#define PL2303_PRODUCT_ID_MMX 0x0612
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
@@ -36,7 +37,6 @@
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID 0xb000
-#define RATOC_PRODUCT_ID_USB60F 0xb020
#define TRIPP_VENDOR_ID 0x2478
#define TRIPP_PRODUCT_ID 0x2008
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1b09578..45fe366 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -405,7 +405,7 @@
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
- US_SC_CYP_ATACB, US_PR_BULK, NULL,
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
0),
#endif
@@ -1522,7 +1522,7 @@
"Sony Ericsson",
"M600i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
@@ -1716,10 +1716,12 @@
/*
* Patch by Pete Zaitcev <zaitcev@redhat.com>
* Report by Mark Patton. Red Hat bz#208928.
+ * Added support for rev 0x0002 (Motorola ROKR W5)
+ * by Javier Smaldone <javier@smaldone.com.ar>
*/
-UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
"Motorola",
- "RAZR V3i",
+ "RAZR V3i/ROKR W5",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e4bcf53..bd4ac0b 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3356,7 +3356,7 @@
info->fix.mmio_start = raddr;
par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
- if (par->ati_regbase == 0)
+ if (par->ati_regbase == NULL)
return -ENOMEM;
info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 72cd0d2..400e926 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2277,8 +2277,8 @@
do {
rinfo->fb_base = ioremap (rinfo->fb_base_phys,
rinfo->mapped_vram);
- } while ( rinfo->fb_base == 0 &&
- ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
+ } while (rinfo->fb_base == NULL &&
+ ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM));
if (rinfo->fb_base == NULL) {
printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c
index 3547717..6ef800b 100644
--- a/drivers/video/display/display-sysfs.c
+++ b/drivers/video/display/display-sysfs.c
@@ -26,6 +26,7 @@
#include <linux/ctype.h>
#include <linux/idr.h>
#include <linux/err.h>
+#include <linux/kdev_t.h>
static ssize_t display_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -152,10 +153,13 @@
mutex_unlock(&allocated_dsp_lock);
if (!ret) {
- new_dev->dev = device_create(display_class, parent, 0,
- "display%d", new_dev->idx);
+ new_dev->dev = device_create_drvdata(display_class,
+ parent,
+ MKDEV(0,0),
+ new_dev,
+ "display%d",
+ new_dev->idx);
if (!IS_ERR(new_dev->dev)) {
- dev_set_drvdata(new_dev->dev, new_dev);
new_dev->parent = parent;
new_dev->driver = driver;
mutex_init(&new_dev->lock);
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index f3107ad..9588323 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -200,7 +200,7 @@
virt->vaddr = ioremap_nocache(phys, size);
else
virt->vaddr = ioremap(phys, size);
- return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */
+ return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */
}
static inline void mga_iounmap(vaddr_t va) {
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3ee314b..274bc93 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1351,7 +1351,6 @@
struct pxafb_info *fbi;
void *addr;
struct pxafb_mach_info *inf = dev->platform_data;
- struct pxafb_mode_info *mode = inf->modes;
/* Alloc the pxafb_info and pseudo_palette in one step */
fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 13b38cb..f059896 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1,75 +1,15 @@
-/*
- * linux/drivers/video/s3c2410fb.c
- * Copyright (c) Arnaud Patard, Ben Dooks
+/* linux/drivers/video/s3c2410fb.c
+ * Copyright (c) 2004,2005 Arnaud Patard
+ * Copyright (c) 2004-2008 Ben Dooks
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.c and others
- *
- * ChangeLog
- * 2005-04-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - u32 state -> pm_message_t state
- * - S3C2410_{VA,SZ}_LCD -> S3C24XX
- *
- * 2005-03-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the ioctl
- * - use readl/writel instead of __raw_writel/__raw_readl
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Added the possibility to set on or off the
- * debugging messages
- * - Replaced 0 and 1 by on or off when reading the
- * /sys files
- *
- * 2005-03-23: Ben Dooks <ben-linux@fluff.org>
- * - added non 16bpp modes
- * - updated platform information for range of x/y/bpp
- * - add code to ensure palette is written correctly
- * - add pixel clock divisor control
- *
- * 2004-11-11: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the use of currcon as it no more exists
- * - Added LCD power sysfs interface
- *
- * 2004-11-03: Ben Dooks <ben-linux@fluff.org>
- * - minor cleanups
- * - add suspend/resume support
- * - s3c2410fb_setcolreg() not valid in >8bpp modes
- * - removed last CONFIG_FB_S3C2410_FIXED
- * - ensure lcd controller stopped before cleanup
- * - added sysfs interface for backlight power
- * - added mask for gpio configuration
- * - ensured IRQs disabled during GPIO configuration
- * - disable TPAL before enabling video
- *
- * 2004-09-20: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Suppress command line options
- *
- * 2004-09-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.c to s3c2410fb.c
- * - Add support for different devices
- * - Backlight support
- *
- * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
- * - added clock (de-)allocation code
- * - added fixem fbmem option
- *
- * 2004-07-27: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- * - added a forgotten return in h1940fb_init
- *
- * 2004-07-19: Herbert Pötzl <herbert@13thfloor.at>
- * - code cleanup and extended debugging
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+ * Driver based on skeletonfb.c, sa1100fb.c and others.
+*/
#include <linux/module.h>
#include <linux/kernel.h>
@@ -580,6 +520,27 @@
return 0;
}
+/* s3c2410fb_lcd_enable
+ *
+ * shutdown the lcd controller
+ */
+static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (enable)
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
+ else
+ fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+
+ writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
+
+ local_irq_restore(flags);
+}
+
+
/*
* s3c2410fb_blank
* @blank_mode: the blank mode we want.
@@ -589,9 +550,6 @@
* blanking succeeded, != 0 if un-/blanking failed due to e.g. a
* video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
- * blank_mode == 2: suspend vsync
- * blank_mode == 3: suspend hsync
- * blank_mode == 4: powerdown
*
* Returns negative errno on error, or zero on success.
*
@@ -605,6 +563,12 @@
tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
+ if (blank_mode == FB_BLANK_POWERDOWN) {
+ s3c2410fb_lcd_enable(fbi, 0);
+ } else {
+ s3c2410fb_lcd_enable(fbi, 1);
+ }
+
if (blank_mode == FB_BLANK_UNBLANK)
writel(0x0, tpal_reg);
else {
@@ -948,7 +912,10 @@
}
/* create device files */
- device_create_file(&pdev->dev, &dev_attr_debug);
+ ret = device_create_file(&pdev->dev, &dev_attr_debug);
+ if (ret) {
+ printk(KERN_ERR "failed to add debug attribute\n");
+ }
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fbinfo->node, fbinfo->fix.id);
@@ -983,21 +950,6 @@
return s3c24xxfb_probe(pdev, DRV_S3C2412);
}
-/* s3c2410fb_stop_lcd
- *
- * shutdown the lcd controller
- */
-static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
- writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
-
- local_irq_restore(flags);
-}
/*
* Cleanup
@@ -1010,7 +962,7 @@
unregister_framebuffer(fbinfo);
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
msleep(1);
s3c2410fb_unmap_video_memory(fbinfo);
@@ -1043,7 +995,7 @@
struct fb_info *fbinfo = platform_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
/* sleep before disabling the clock, we need to ensure
* the LCD DMA engine is not going to get back on the bus
@@ -1118,3 +1070,5 @@
"Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-lcd");
+MODULE_ALIAS("platform:s3c2412-lcd");
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index dbb73b9..9a6ba3e 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -1,26 +1,14 @@
/*
* linux/drivers/video/s3c2410fb.h
- * Copyright (c) Arnaud Patard
+ * Copyright (c) 2004 Arnaud Patard
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.h
- *
- * ChangeLog
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Moved dprintk to s3c2410fb.c
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.h to s3c2410fb.h
- * - Changed h1940 to s3c2410
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+*/
#ifndef __S3C2410FB_H
#define __S3C2410FB_H
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7380362..b934384 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5787,7 +5787,7 @@
} else {
struct sis_video_info *countvideo = card_list;
ivideo->cardnumber = 1;
- while((countvideo = countvideo->next) != 0)
+ while((countvideo = countvideo->next) != NULL)
ivideo->cardnumber++;
}
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 742b5c6..15d4a76 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -663,14 +663,14 @@
sm501fb_sync_regs(fbi);
mdelay(10);
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control |= SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
@@ -678,14 +678,14 @@
}
} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
/* disable panel power */
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control &= ~SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control &= ~SM501_DC_PANEL_CONTROL_BIAS;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 1386678..0f3c2bb 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -2,6 +2,9 @@
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
+/* Unique numbering for virtio devices. */
+static unsigned int dev_index;
+
static ssize_t device_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
@@ -166,7 +169,10 @@
int err;
dev->dev.bus = &virtio_bus;
- sprintf(dev->dev.bus_id, "%u", dev->index);
+
+ /* Assign a unique device index and hence name. */
+ dev->index = dev_index++;
+ sprintf(dev->dev.bus_id, "virtio%u", dev->index);
/* We always start by resetting the device, in case a previous
* driver messed it up. This also tests that code path a little. */
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 27e9fc9..eae72363 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -78,9 +78,6 @@
.bus_id = "virtio-pci",
};
-/* Unique numbering for devices under the kvm root */
-static unsigned int dev_index;
-
/* Convert a generic virtio device to our structure */
static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
{
@@ -325,10 +322,6 @@
if (vp_dev == NULL)
return -ENOMEM;
- snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
- vp_dev->vdev.index = dev_index;
- dev_index++;
-
vp_dev->vdev.dev.parent = &virtio_pci_root;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 937a49d..72bf8bc 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -227,7 +227,6 @@
struct vring_virtqueue *vq = to_vvq(_vq);
START_USE(vq);
- BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT));
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
@@ -254,13 +253,6 @@
if (unlikely(vq->broken))
return IRQ_HANDLED;
- /* Other side may have missed us turning off the interrupt,
- * but we should preserve disable semantic for virtio users. */
- if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
- pr_debug("virtqueue interrupt after disable for %p\n", vq);
- return IRQ_HANDLED;
- }
-
pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
if (vq->vq.callback)
vq->vq.callback(&vq->vq);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 254d115..ccb78f6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -295,6 +295,19 @@
Most people will say N.
+config GEODE_WDT
+ tristate "AMD Geode CS5535/CS5536 Watchdog"
+ depends on MGEODE_LX
+ help
+ This driver enables a watchdog capability built into the
+ CS5535/CS5536 companion chips for the AMD Geode GX and LX
+ processors. This watchdog watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after
+ a certain amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called geodewdt.
+
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f3fb170..25b352b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 1237113..03b3e3d 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -29,7 +29,8 @@
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
#define stampit() stamp("here i am")
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
#define WATCHDOG_NAME "bfin-wdt"
#define PFX WATCHDOG_NAME ": "
@@ -377,20 +378,6 @@
# define bfin_wdt_resume NULL
#endif
-static struct platform_device bfin_wdt_device = {
- .name = WATCHDOG_NAME,
- .id = -1,
-};
-
-static struct platform_driver bfin_wdt_driver = {
- .driver = {
- .name = WATCHDOG_NAME,
- .owner = THIS_MODULE,
- },
- .suspend = bfin_wdt_suspend,
- .resume = bfin_wdt_resume,
-};
-
static const struct file_operations bfin_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -418,10 +405,66 @@
};
/**
+ * bfin_wdt_probe - Initialize module
+ *
+ * Registers the misc device and notifier handler. Actual device
+ * initialization is handled by bfin_wdt_open().
+ */
+static int __devinit bfin_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = register_reboot_notifier(&bfin_wdt_notifier);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ ret = misc_register(&bfin_wdt_miscdev);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return ret;
+ }
+
+ pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+ return 0;
+}
+
+/**
+ * bfin_wdt_remove - Initialize module
+ *
+ * Unregisters the misc device and notifier handler. Actual device
+ * deinitialization is handled by bfin_wdt_close().
+ */
+static int __devexit bfin_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&bfin_wdt_miscdev);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return 0;
+}
+
+static struct platform_device *bfin_wdt_device;
+
+static struct platform_driver bfin_wdt_driver = {
+ .probe = bfin_wdt_probe,
+ .remove = __devexit_p(bfin_wdt_remove),
+ .suspend = bfin_wdt_suspend,
+ .resume = bfin_wdt_resume,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
* bfin_wdt_init - Initialize module
*
- * Registers the device and notifier handler. Actual device
- * initialization is handled by bfin_wdt_open().
+ * Checks the module params and registers the platform device & driver.
+ * Real work is in the platform probe function.
*/
static int __init bfin_wdt_init(void)
{
@@ -436,44 +479,32 @@
/* Since this is an on-chip device and needs no board-specific
* resources, we'll handle all the platform device stuff here.
*/
- ret = platform_device_register(&bfin_wdt_device);
- if (ret)
- return ret;
-
- ret = platform_driver_probe(&bfin_wdt_driver, NULL);
- if (ret)
- return ret;
-
- ret = register_reboot_notifier(&bfin_wdt_notifier);
+ ret = platform_driver_register(&bfin_wdt_driver);
if (ret) {
- pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ pr_init(KERN_ERR PFX "unable to register driver\n");
return ret;
}
- ret = misc_register(&bfin_wdt_miscdev);
- if (ret) {
- pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- unregister_reboot_notifier(&bfin_wdt_notifier);
- return ret;
+ bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+ if (IS_ERR(bfin_wdt_device)) {
+ pr_init(KERN_ERR PFX "unable to register device\n");
+ platform_driver_unregister(&bfin_wdt_driver);
+ return PTR_ERR(bfin_wdt_device);
}
- pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
-
return 0;
}
/**
* bfin_wdt_exit - Deinitialize module
*
- * Unregisters the device and notifier handler. Actual device
- * deinitialization is handled by bfin_wdt_close().
+ * Back out the platform device & driver steps. Real work is in the
+ * platform remove function.
*/
static void __exit bfin_wdt_exit(void)
{
- misc_deregister(&bfin_wdt_miscdev);
- unregister_reboot_notifier(&bfin_wdt_notifier);
+ platform_device_unregister(bfin_wdt_device);
+ platform_driver_unregister(&bfin_wdt_driver);
}
module_init(bfin_wdt_init);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index d362f5b..c1ba0db 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -1,12 +1,10 @@
/*
- * drivers/char/watchdog/booke_wdt.c
- *
* Watchdog timer for PowerPC Book-E systems
*
* Author: Matthew McClintock
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -16,6 +14,7 @@
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/smp.h>
#include <linux/miscdevice.h>
#include <linux/notifier.h>
#include <linux/watchdog.h>
@@ -38,7 +37,7 @@
#define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */
#endif /* for timing information */
-u32 booke_wdt_enabled = 0;
+u32 booke_wdt_enabled;
u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
#ifdef CONFIG_FSL_BOOKE
@@ -47,33 +46,31 @@
#define WDTP(x) (TCR_WP(x))
#endif
-/*
- * booke_wdt_ping:
- */
-static __inline__ void booke_wdt_ping(void)
+static DEFINE_SPINLOCK(booke_wdt_lock);
+
+static void __booke_wdt_ping(void *data)
{
mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
}
-/*
- * booke_wdt_enable:
- */
-static __inline__ void booke_wdt_enable(void)
+static void booke_wdt_ping(void)
+{
+ on_each_cpu(__booke_wdt_ping, NULL, 0, 0);
+}
+
+static void __booke_wdt_enable(void *data)
{
u32 val;
/* clear status before enabling watchdog */
- booke_wdt_ping();
+ __booke_wdt_ping(NULL);
val = mfspr(SPRN_TCR);
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
mtspr(SPRN_TCR, val);
}
-/*
- * booke_wdt_write:
- */
-static ssize_t booke_wdt_write (struct file *file, const char __user *buf,
+static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
booke_wdt_ping();
@@ -81,15 +78,11 @@
}
static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .firmware_version = 0,
- .identity = "PowerPC Book-E Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "PowerPC Book-E Watchdog",
};
-/*
- * booke_wdt_ioctl:
- */
-static int booke_wdt_ioctl (struct inode *inode, struct file *file,
+static int booke_wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
u32 tmp = 0;
@@ -97,7 +90,7 @@
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user ((struct watchdog_info __user *) arg, &ident,
+ if (copy_to_user((struct watchdog_info __user *)arg, &ident,
sizeof(struct watchdog_info)))
return -EFAULT;
case WDIOC_GETSTATUS:
@@ -132,33 +125,33 @@
return 0;
}
-/*
- * booke_wdt_open:
- */
-static int booke_wdt_open (struct inode *inode, struct file *file)
+
+static int booke_wdt_open(struct inode *inode, struct file *file)
{
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 0) {
booke_wdt_enabled = 1;
- booke_wdt_enable();
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
}
+ spin_unlock(&booke_wdt_lock);
return nonseekable_open(inode, file);
}
static const struct file_operations booke_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = booke_wdt_write,
- .ioctl = booke_wdt_ioctl,
- .open = booke_wdt_open,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = booke_wdt_write,
+ .ioctl = booke_wdt_ioctl,
+ .open = booke_wdt_open,
};
static struct miscdevice booke_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &booke_wdt_fops,
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &booke_wdt_fops,
};
static void __exit booke_wdt_exit(void)
@@ -166,28 +159,27 @@
misc_deregister(&booke_wdt_miscdev);
}
-/*
- * booke_wdt_init:
- */
static int __init booke_wdt_init(void)
{
int ret = 0;
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
ident.firmware_version = cur_cpu_spec->pvr_value;
ret = misc_register(&booke_wdt_miscdev);
if (ret) {
- printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n",
WATCHDOG_MINOR, ret);
return ret;
}
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 1) {
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
- booke_wdt_enable();
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
}
+ spin_unlock(&booke_wdt_lock);
return ret;
}
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
new file mode 100644
index 0000000..30d09cb
--- /dev/null
+++ b/drivers/watchdog/geodewdt.c
@@ -0,0 +1,308 @@
+/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/uaccess.h>
+#include <asm/geode.h>
+
+#define GEODEWDT_HZ 500
+#define GEODEWDT_SCALE 6
+#define GEODEWDT_MAX_SECONDS 131
+
+#define WDT_FLAGS_OPEN 1
+#define WDT_FLAGS_ORPHAN 2
+
+#define DRV_NAME "geodewdt"
+#define WATCHDOG_NAME "Geode GX/LX WDT"
+#define WATCHDOG_TIMEOUT 60
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct platform_device *geodewdt_platform_device;
+static unsigned long wdt_flags;
+static int wdt_timer;
+static int safe_close;
+
+static void geodewdt_ping(void)
+{
+ /* Stop the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+
+ /* Reset the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+
+ /* Enable the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+}
+
+static void geodewdt_disable(void)
+{
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+}
+
+static int geodewdt_set_heartbeat(int val)
+{
+ if (val < 1 || val > GEODEWDT_MAX_SECONDS)
+ return -EINVAL;
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+
+ timeout = val;
+ return 0;
+}
+
+static int
+geodewdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+ return -EBUSY;
+
+ if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+ __module_get(THIS_MODULE);
+
+ geodewdt_ping();
+ return nonseekable_open(inode, file);
+}
+
+static int
+geodewdt_release(struct inode *inode, struct file *file)
+{
+ if (safe_close) {
+ geodewdt_disable();
+ module_put(THIS_MODULE);
+ }
+ else {
+ printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
+ geodewdt_ping();
+
+ set_bit(WDT_FLAGS_ORPHAN, &wdt_flags);
+ }
+
+ clear_bit(WDT_FLAGS_OPEN, &wdt_flags);
+ safe_close = 0;
+ return 0;
+}
+
+static ssize_t
+geodewdt_write(struct file *file, const char __user *data, size_t len,
+ loff_t *ppos)
+{
+ if(len) {
+ if (!nowayout) {
+ size_t i;
+ safe_close = 0;
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+
+ if (c == 'V')
+ safe_close = 1;
+ }
+ }
+
+ geodewdt_ping();
+ }
+ return len;
+}
+
+static int
+geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int interval;
+
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+ .identity = WATCHDOG_NAME,
+ };
+
+ switch(cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ geodewdt_ping();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(interval, p))
+ return -EFAULT;
+
+ if (geodewdt_set_heartbeat(interval))
+ return -EINVAL;
+
+/* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, p);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, ret = -EINVAL;
+
+ if (get_user(options, p))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ geodewdt_disable();
+ ret = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ geodewdt_ping();
+ ret = 0;
+ }
+
+ return ret;
+ }
+ default:
+ return -ENOTTY;
+ }
+
+ return 0;
+}
+
+static const struct file_operations geodewdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = geodewdt_write,
+ .ioctl = geodewdt_ioctl,
+ .open = geodewdt_open,
+ .release = geodewdt_release,
+};
+
+static struct miscdevice geodewdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &geodewdt_fops
+};
+
+static int __devinit
+geodewdt_probe(struct platform_device *dev)
+{
+ int ret, timer;
+
+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+
+ if (timer == -1) {
+ printk(KERN_ERR "geodewdt: No timers were available\n");
+ return -ENODEV;
+ }
+
+ wdt_timer = timer;
+
+ /* Set up the timer */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP,
+ GEODEWDT_SCALE | (3 << 8));
+
+ /* Set up comparator 2 to reset when the event fires */
+ geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1);
+
+ /* Set up the initial timeout */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2,
+ timeout * GEODEWDT_HZ);
+
+ ret = misc_register(&geodewdt_miscdev);
+
+ return ret;
+}
+
+static int __devexit
+geodewdt_remove(struct platform_device *dev)
+{
+ misc_deregister(&geodewdt_miscdev);
+ return 0;
+}
+
+static void
+geodewdt_shutdown(struct platform_device *dev)
+{
+ geodewdt_disable();
+}
+
+static struct platform_driver geodewdt_driver = {
+ .probe = geodewdt_probe,
+ .remove = __devexit_p(geodewdt_remove),
+ .shutdown = geodewdt_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init
+geodewdt_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&geodewdt_driver);
+ if (ret)
+ return ret;
+
+ geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(geodewdt_platform_device)) {
+ ret = PTR_ERR(geodewdt_platform_device);
+ goto err;
+ }
+
+ return 0;
+err:
+ platform_driver_unregister(&geodewdt_driver);
+ return ret;
+}
+
+static void __exit
+geodewdt_exit(void)
+{
+ platform_device_unregister(geodewdt_platform_device);
+ platform_driver_unregister(&geodewdt_driver);
+}
+
+module_init(geodewdt_init);
+module_exit(geodewdt_exit);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 6483d10..6a63535 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -418,23 +418,20 @@
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
- return NOTIFY_OK;
-
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
- "but unable to determine source.\n");
- } else {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
+ if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral != 0) {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
+ }
}
- return NOTIFY_STOP;
+ die_nmi_called = 0;
+ return NOTIFY_DONE;
}
/*
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index a0e6809..95ba985 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -41,9 +41,10 @@
* 82801HH (ICH8DH) : document number 313056-003, 313057-009,
* 82801HO (ICH8DO) : document number 313056-003, 313057-009,
* 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
- * 82801IB (ICH9) : document number 316972-001, 316973-001,
- * 82801IR (ICH9R) : document number 316972-001, 316973-001,
- * 82801IH (ICH9DH) : document number 316972-001, 316973-001,
+ * 82801IB (ICH9) : document number 316972-001, 316973-006,
+ * 82801IR (ICH9R) : document number 316972-001, 316973-006,
+ * 82801IH (ICH9DH) : document number 316972-001, 316973-006,
+ * 82801IO (ICH9DO) : document number 316972-001, 316973-006,
* 6300ESB (6300ESB) : document number 300641-003, 300884-010,
* 631xESB (631xESB) : document number 313082-001, 313075-005,
* 632xESB (632xESB) : document number 313082-001, 313075-005
@@ -55,8 +56,8 @@
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.02"
-#define DRV_RELDATE "26-Jul-2007"
+#define DRV_VERSION "1.03"
+#define DRV_RELDATE "30-Apr-2008"
#define PFX DRV_NAME ": "
/* Includes */
@@ -104,6 +105,7 @@
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
+ TCO_ICH9DO, /* ICH9DO */
TCO_631XESB, /* 631xESB/632xESB */
};
@@ -136,6 +138,7 @@
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
+ {"ICH9DO", 2},
{"631xESB/632xESB", 2},
{NULL,0}
};
@@ -181,6 +184,7 @@
{ ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )},
{ ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index c622a0e..528b882 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -44,6 +44,7 @@
#define WATCHDOG_NAME "w83697hf/hg WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
+#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */
static unsigned long wdt_is_open;
static char expect_close;
@@ -56,12 +57,16 @@
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+static int early_disable = WATCHDOG_EARLY_DISABLE;
+module_param(early_disable, int, 0);
+MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+
/*
* Kernel methods.
*/
@@ -140,7 +145,7 @@
w83697hf_deselect_wdt();
}
-static int
+static void
wdt_ping(void)
{
spin_lock(&io_lock);
@@ -150,10 +155,9 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_enable(void)
{
spin_lock(&io_lock);
@@ -164,10 +168,9 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_disable(void)
{
spin_lock(&io_lock);
@@ -178,7 +181,22 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
+}
+
+static unsigned char
+wdt_running(void)
+{
+ unsigned char t;
+
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ t = w83697hf_get_reg(0xF4); /* Read timer */
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+
+ return t;
}
static int
@@ -397,7 +415,11 @@
}
w83697hf_init();
- wdt_disable(); /* Disable watchdog until first use */
+ if (early_disable) {
+ if (wdt_running())
+ printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+ wdt_disable();
+ }
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
diff --git a/fs/cifs/AUTHORS b/fs/cifs/AUTHORS
index 8848e4d..9c136d7 100644
--- a/fs/cifs/AUTHORS
+++ b/fs/cifs/AUTHORS
@@ -36,6 +36,7 @@
Kazeon team for various fixes especially for 2.4 version.
Asser Ferno (Change Notify support)
Shaggy (Dave Kleikamp) for inumerable small fs suggestions and some good cleanup
+Igor Mammedov (DFS support)
Test case and Bug Report contributors
-------------------------------------
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 8355e91..28e3d5c 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,5 +1,7 @@
Version 1.53
------------
+DFS support added (Microsoft Distributed File System client support needed
+for referrals which enable a hierarchical name space among servers).
Version 1.52
------------
@@ -12,7 +14,8 @@
cifsacl flag). Fix prefixpath path separator so we can handle mounts
with prefixpaths longer than one directory (one path component) when
mounted to Windows servers. Fix slow file open when cifsacl
-enabled.
+enabled. Fix memory leak in FindNext when the SMB call returns -EBADF.
+
Version 1.51
------------
diff --git a/fs/cifs/README b/fs/cifs/README
index 621aa1a..2bd6fe5 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -483,6 +483,11 @@
sign Must use packet signing (helps avoid unwanted data modification
by intermediate systems in the route). Note that signing
does not work with lanman or plaintext authentication.
+ seal Must seal (encrypt) all data on this mounted share before
+ sending on the network. Requires support for Unix Extensions.
+ Note that this differs from the sign mount option in that it
+ causes encryption of data sent over this mounted share but other
+ shares mounted to the same server are unaffected.
sec Security mode. Allowed values are:
none attempt to connection as a null user (no name)
krb5 Use Kerberos version 5 authentication
diff --git a/fs/cifs/TODO b/fs/cifs/TODO
index 92c9fea..5aff46c 100644
--- a/fs/cifs/TODO
+++ b/fs/cifs/TODO
@@ -1,4 +1,4 @@
-Version 1.52 January 3, 2008
+Version 1.53 May 20, 2008
A Partial List of Missing Features
==================================
@@ -20,20 +20,21 @@
fs/cifs/connect.c and add back in NTLMSSP code if any servers
need it
-e) ms-dfs and ms-dfs host name resolution cleanup
-
-f) fix NTLMv2 signing when two mounts with different users to same
+e) fix NTLMv2 signing when two mounts with different users to same
server.
-g) Directory entry caching relies on a 1 second timer, rather than
+f) Directory entry caching relies on a 1 second timer, rather than
using FindNotify or equivalent. - (started)
-h) quota support (needs minor kernel change since quota calls
+g) quota support (needs minor kernel change since quota calls
to make it to network filesystems or deviceless filesystems)
-i) investigate sync behavior (including syncpage) and check
+h) investigate sync behavior (including syncpage) and check
for proper behavior of intr/nointr
+i) improve support for very old servers (OS/2 and Win9x for example)
+Including support for changing the time remotely (utimes command).
+
j) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
extra copy in/out of the socket buffers in some cases.
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index f6fdecf..d82374c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -219,53 +219,6 @@
}
-static char *build_full_dfs_path_from_dentry(struct dentry *dentry)
-{
- char *full_path = NULL;
- char *search_path;
- char *tmp_path;
- size_t l_max_len;
- struct cifs_sb_info *cifs_sb;
-
- if (dentry->d_inode == NULL)
- return NULL;
-
- cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
-
- if (cifs_sb->tcon == NULL)
- return NULL;
-
- search_path = build_path_from_dentry(dentry);
- if (search_path == NULL)
- return NULL;
-
- if (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS) {
- int i;
- /* we should use full path name for correct working with DFS */
- l_max_len = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE+1) +
- strnlen(search_path, MAX_PATHCONF) + 1;
- tmp_path = kmalloc(l_max_len, GFP_KERNEL);
- if (tmp_path == NULL) {
- kfree(search_path);
- return NULL;
- }
- strncpy(tmp_path, cifs_sb->tcon->treeName, l_max_len);
- tmp_path[l_max_len-1] = 0;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < l_max_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncat(tmp_path, search_path, l_max_len - strlen(tmp_path));
-
- full_path = tmp_path;
- kfree(search_path);
- } else {
- full_path = search_path;
- }
- return full_path;
-}
-
static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
struct list_head *mntlist)
{
@@ -333,7 +286,7 @@
goto out_err;
}
- full_path = build_full_dfs_path_from_dentry(dentry);
+ full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
rc = -ENOMEM;
goto out_err;
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 8ad2330..877c854 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -30,6 +30,7 @@
#define CIFS_MOUNT_CIFS_ACL 0x200 /* send ACL requests to non-POSIX srv */
#define CIFS_MOUNT_OVERR_UID 0x400 /* override uid returned from server */
#define CIFS_MOUNT_OVERR_GID 0x800 /* override gid returned from server */
+#define CIFS_MOUNT_DYNPERM 0x1000 /* allow in-memory only mode setting */
struct cifs_sb_info {
struct cifsTconInfo *tcon; /* primary mount */
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 6653e29..7013aaf 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -119,6 +119,9 @@
dp = description + strlen(description);
sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
+ dp = description + strlen(description);
+ sprintf(dp, ";user=%s", sesInfo->userName);
+
cFYI(1, ("key description = %s", description));
spnego_key = request_key(&cifs_spnego_key_type, description, "");
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 427a7c6..5df93fd 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsfs.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Common Internet FileSystem (CIFS) client
@@ -353,9 +353,41 @@
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
!(cifs_sb->tcon->unix_ext))
seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (!cifs_sb->tcon->unix_ext) {
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ cifs_sb->mnt_file_mode,
+ cifs_sb->mnt_dir_mode);
+ }
+ if (cifs_sb->tcon->seal)
+ seq_printf(s, ",seal");
+ if (cifs_sb->tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (cifs_sb->tcon->retry)
+ seq_printf(s, ",hard");
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
+
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
}
@@ -657,7 +689,7 @@
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -677,7 +709,7 @@
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -697,7 +729,7 @@
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -716,7 +748,7 @@
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -731,7 +763,7 @@
#ifdef CONFIG_CIFS_EXPERIMENTAL
.dir_notify = cifs_dir_notify,
#endif /* CONFIG_CIFS_EXPERIMENTAL */
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
};
static void
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index cd1301a..25a6cbd 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -95,8 +95,7 @@
size_t, int);
extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t);
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
-extern int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg);
+extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_CIFS_EXPERIMENTAL
extern const struct export_operations cifs_export_ops;
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b7d9f69..0891405 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -281,6 +281,7 @@
bool ipc:1; /* set if connection to IPC$ eg for RPC/PIPES */
bool retry:1;
bool nocase:1;
+ bool seal:1; /* transport encryption for this mounted share */
bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol
for this mount even if server would support */
/* BB add field for back pointer to sb struct(s)? */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index c43bf4b..65d58b4 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -1904,19 +1904,26 @@
char RequestFileName[1];
} __attribute__((packed)) TRANSACTION2_GET_DFS_REFER_REQ;
+#define DFS_VERSION cpu_to_le16(0x0003)
+
+/* DFS server target type */
+#define DFS_TYPE_LINK 0x0000 /* also for sysvol targets */
+#define DFS_TYPE_ROOT 0x0001
+
+/* Referral Entry Flags */
+#define DFS_NAME_LIST_REF 0x0200
+
typedef struct dfs_referral_level_3 {
__le16 VersionNumber;
- __le16 ReferralSize;
- __le16 ServerType; /* 0x0001 = CIFS server */
- __le16 ReferralFlags; /* or proximity - not clear which since it is
- always set to zero - SNIA spec says 0x01
- means strip off PathConsumed chars before
- submitting RequestFileName to remote node */
- __le16 TimeToLive;
- __le16 Proximity;
+ __le16 Size;
+ __le16 ServerType; /* 0x0001 = root targets; 0x0000 = link targets */
+ __le16 ReferralEntryFlags; /* 0x0200 bit set only for domain
+ or DC referral responce */
+ __le32 TimeToLive;
__le16 DfsPathOffset;
__le16 DfsAlternatePathOffset;
- __le16 NetworkAddressOffset;
+ __le16 NetworkAddressOffset; /* offset of the link target */
+ __le16 ServiceSiteGuid;
} __attribute__((packed)) REFERRAL3;
typedef struct smb_com_transaction_get_dfs_refer_rsp {
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index d481f6c..b9f5e93 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -93,7 +93,7 @@
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
- FILE_ALL_INFO * pfile_info,
+ FILE_ALL_INFO *pfile_info,
struct super_block *sb, int xid, const __u16 *pfid);
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
@@ -130,7 +130,7 @@
extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_ALL_INFO * findData,
+ FILE_ALL_INFO *findData,
int legacy /* whether to use old info level */,
const struct nls_table *nls_codepage, int remap);
extern int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon,
@@ -141,18 +141,15 @@
extern int CIFSSMBUnixQPathInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap);
extern int CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *number_of_nodes_in_array,
const struct nls_table *nls_codepage, int remap);
-extern int connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path,
- const struct nls_table *nls_codepage, int remap);
extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
const char *old_path,
const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 95fbba4e..fb655b4 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -81,6 +81,40 @@
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
+/* Allocates buffer into dst and copies smb string from src to it.
+ * caller is responsible for freeing dst if function returned 0.
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
+ const bool is_unicode, const struct nls_table *nls_codepage)
+{
+ int plen;
+
+ if (is_unicode) {
+ plen = UniStrnlen((wchar_t *)src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
+ } else {
+ plen = strnlen(src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ strncpy(*dst, src, plen);
+ }
+ (*dst)[plen] = 0;
+ (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
+ return 0;
+
+cifs_strncpy_to_host_ErrExit:
+ cERROR(1, ("Failed to allocate buffer for string\n"));
+ return -ENOMEM;
+}
+
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
@@ -1166,6 +1200,20 @@
return ofun;
}
+static int
+access_flags_to_smbopen_mode(const int access_flags)
+{
+ int masked_flags = access_flags & (GENERIC_READ | GENERIC_WRITE);
+
+ if (masked_flags == GENERIC_READ)
+ return SMBOPEN_READ;
+ else if (masked_flags == GENERIC_WRITE)
+ return SMBOPEN_WRITE;
+
+ /* just go for read/write */
+ return SMBOPEN_READWRITE;
+}
+
int
SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int openDisposition,
@@ -1207,13 +1255,7 @@
pSMB->OpenFlags = cpu_to_le16(REQ_BATCHOPLOCK);
pSMB->OpenFlags |= cpu_to_le16(REQ_MORE_INFO);
- /* BB fixme add conversion for access_flags to bits 0 - 2 of mode */
- /* 0 = read
- 1 = write
- 2 = rw
- 3 = execute
- */
- pSMB->Mode = cpu_to_le16(2);
+ pSMB->Mode = cpu_to_le16(access_flags_to_smbopen_mode(access_flags));
pSMB->Mode |= cpu_to_le16(0x40); /* deny none */
/* set file as system file if special file such
as fifo and server expecting SFU style and
@@ -1247,7 +1289,7 @@
} else {
/* BB verify if wct == 15 */
-/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field BB */
+/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field*/
*netfid = pSMBr->Fid; /* cifs fid stays in le */
/* Let caller know file was created so we can set the mode. */
@@ -1767,7 +1809,7 @@
cFYI(1, ("Posix Lock"));
if (pLockData == NULL)
- return EINVAL;
+ return -EINVAL;
rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
@@ -1944,7 +1986,7 @@
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2],
+ cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
@@ -2117,8 +2159,7 @@
cFYI(1, ("Send error in copy = %d with %d files copied",
rc, le16_to_cpu(pSMBr->CopyCount)));
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto copyRetry;
@@ -2207,8 +2248,7 @@
if (rc)
cFYI(1, ("Send error in SetPathInfo create symlink = %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto createSymLinkRetry;
@@ -2925,7 +2965,8 @@
}
params = 6 + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB size from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3322,7 +3363,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3388,7 +3430,7 @@
int
CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap)
{
/* SMB_QUERY_FILE_UNIX_BASIC */
@@ -3679,6 +3721,7 @@
if (rc) {
if (rc == -EBADF) {
psrch_inf->endOfSearch = true;
+ cifs_buf_release(pSMB);
rc = 0; /* search probably was closed at end of search*/
} else
cFYI(1, ("FindNext returned = %d", rc));
@@ -3856,25 +3899,112 @@
return rc;
}
+/* parses DFS refferal V3 structure
+ * caller is responsible for freeing target_nodes
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
+ unsigned int *num_of_nodes,
+ struct dfs_info3_param **target_nodes,
+ const struct nls_table *nls_codepage)
+{
+ int i, rc = 0;
+ char *data_end;
+ bool is_unicode;
+ struct dfs_referral_level_3 *ref;
+
+ is_unicode = pSMBr->hdr.Flags2 & SMBFLG2_UNICODE;
+ *num_of_nodes = le16_to_cpu(pSMBr->NumberOfReferrals);
+
+ if (*num_of_nodes < 1) {
+ cERROR(1, ("num_referrals: must be at least > 0,"
+ "but we get num_referrals = %d\n", *num_of_nodes));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
+ if (ref->VersionNumber != cpu_to_le16(3)) {
+ cERROR(1, ("Referrals of V%d version are not supported,"
+ "should be V3", le16_to_cpu(ref->VersionNumber)));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* get the upper boundary of the resp buffer */
+ data_end = (char *)(&(pSMBr->PathConsumed)) +
+ le16_to_cpu(pSMBr->t2.DataCount);
+
+ cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
+ *num_of_nodes,
+ le16_to_cpu(pSMBr->DFSFlags)));
+
+ *target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
+ *num_of_nodes, GFP_KERNEL);
+ if (*target_nodes == NULL) {
+ cERROR(1, ("Failed to allocate buffer for target_nodes\n"));
+ rc = -ENOMEM;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* collect neccessary data from referrals */
+ for (i = 0; i < *num_of_nodes; i++) {
+ char *temp;
+ int max_len;
+ struct dfs_info3_param *node = (*target_nodes)+i;
+
+ node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->path_consumed = le16_to_cpu(pSMBr->PathConsumed);
+ node->server_type = le16_to_cpu(ref->ServerType);
+ node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags);
+
+ /* copy DfsPath */
+ temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->path_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ /* copy link target UNC */
+ temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->node_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ ref += le16_to_cpu(ref->Size);
+ }
+
+parse_DFS_referrals_exit:
+ if (rc) {
+ free_dfs_info_array(*target_nodes, *num_of_nodes);
+ *target_nodes = NULL;
+ *num_of_nodes = 0;
+ }
+ return rc;
+}
+
int
CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *num_of_nodes,
const struct nls_table *nls_codepage, int remap)
{
/* TRANS2_GET_DFS_REFERRAL */
TRANSACTION2_GET_DFS_REFER_REQ *pSMB = NULL;
TRANSACTION2_GET_DFS_REFER_RSP *pSMBr = NULL;
- struct dfs_referral_level_3 *referrals = NULL;
int rc = 0;
int bytes_returned;
int name_len;
- unsigned int i;
- char *temp;
__u16 params, byte_count;
- *number_of_UNC_in_array = 0;
- *targetUNCs = NULL;
+ *num_of_nodes = 0;
+ *target_nodes = NULL;
cFYI(1, ("In GetDFSRefer the path %s", searchName));
if (ses == NULL)
@@ -3921,7 +4051,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = 0;
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3943,103 +4074,26 @@
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in GetDFSRefer = %d", rc));
- } else { /* decode response */
-/* BB Add logic to parse referrals here */
- rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-
- /* BB Also check if enough total bytes returned? */
- if (rc || (pSMBr->ByteCount < 17))
- rc = -EIO; /* bad smb */
- else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 data_count = le16_to_cpu(pSMBr->t2.DataCount);
-
- cFYI(1,
- ("Decoding GetDFSRefer response BCC: %d Offset %d",
- pSMBr->ByteCount, data_offset));
- referrals =
- (struct dfs_referral_level_3 *)
- (8 /* sizeof start of data block */ +
- data_offset +
- (char *) &pSMBr->hdr.Protocol);
- cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n"
- "for referral one refer size: 0x%x srv "
- "type: 0x%x refer flags: 0x%x ttl: 0x%x",
- le16_to_cpu(pSMBr->NumberOfReferrals),
- le16_to_cpu(pSMBr->DFSFlags),
- le16_to_cpu(referrals->ReferralSize),
- le16_to_cpu(referrals->ServerType),
- le16_to_cpu(referrals->ReferralFlags),
- le16_to_cpu(referrals->TimeToLive)));
- /* BB This field is actually two bytes in from start of
- data block so we could do safety check that DataBlock
- begins at address of pSMBr->NumberOfReferrals */
- *number_of_UNC_in_array =
- le16_to_cpu(pSMBr->NumberOfReferrals);
-
- /* BB Fix below so can return more than one referral */
- if (*number_of_UNC_in_array > 1)
- *number_of_UNC_in_array = 1;
-
- /* get the length of the strings describing refs */
- name_len = 0;
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- /* make sure that DfsPathOffset not past end */
- __u16 offset =
- le16_to_cpu(referrals->DfsPathOffset);
- if (offset > data_count) {
- /* if invalid referral, stop here and do
- not try to copy any more */
- *number_of_UNC_in_array = i;
- break;
- }
- temp = ((char *)referrals) + offset;
-
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len += UniStrnlen((wchar_t *)temp,
- data_count);
- } else {
- name_len += strnlen(temp, data_count);
- }
- referrals++;
- /* BB add check that referral pointer does
- not fall off end PDU */
- }
- /* BB add check for name_len bigger than bcc */
- *targetUNCs =
- kmalloc(name_len+1+(*number_of_UNC_in_array),
- GFP_KERNEL);
- if (*targetUNCs == NULL) {
- rc = -ENOMEM;
- goto GetDFSRefExit;
- }
- /* copy the ref strings */
- referrals = (struct dfs_referral_level_3 *)
- (8 /* sizeof data hdr */ + data_offset +
- (char *) &pSMBr->hdr.Protocol);
-
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- temp = ((char *)referrals) +
- le16_to_cpu(referrals->DfsPathOffset);
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- cifs_strfromUCS_le(*targetUNCs,
- (__le16 *) temp,
- name_len,
- nls_codepage);
- } else {
- strncpy(*targetUNCs, temp, name_len);
- }
- /* BB update target_uncs pointers */
- referrals++;
- }
- temp = *targetUNCs;
- temp[name_len] = 0;
- }
-
+ goto GetDFSRefExit;
}
+ rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+
+ /* BB Also check if enough total bytes returned? */
+ if (rc || (pSMBr->ByteCount < 17)) {
+ rc = -EIO; /* bad smb */
+ goto GetDFSRefExit;
+ }
+
+ cFYI(1, ("Decoding GetDFSRefer response BCC: %d Offset %d",
+ pSMBr->ByteCount,
+ le16_to_cpu(pSMBr->t2.DataOffset)));
+
+ /* parse returned result into more usable form */
+ rc = parse_DFS_referrals(pSMBr, num_of_nodes,
+ target_nodes, nls_codepage);
+
GetDFSRefExit:
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto getDFSRetry;
@@ -4229,7 +4283,8 @@
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4298,7 +4353,8 @@
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4369,7 +4425,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4444,7 +4501,8 @@
offset = param_offset + params;
pSMB->MaxParameterCount = cpu_to_le16(4);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FS_INFORMATION);
@@ -4512,7 +4570,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4702,7 +4761,8 @@
count = sizeof(struct file_end_of_file_info);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
@@ -4789,7 +4849,8 @@
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
@@ -4856,7 +4917,8 @@
params = 6 + name_len;
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4986,7 +5048,8 @@
params = 6 + name_len;
count = sizeof(FILE_UNIX_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5051,8 +5114,7 @@
if (rc)
cFYI(1, ("SetPathInfo (perms) returned %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto setPermsRetry;
return rc;
@@ -5169,7 +5231,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5273,8 +5336,7 @@
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QAllEAsRetry;
@@ -5317,7 +5379,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5422,8 +5485,7 @@
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QEARetry;
@@ -5475,7 +5537,8 @@
count = sizeof(*parm_data) + ea_value_len + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index f428bf3..023434f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -60,7 +60,7 @@
char *domainname;
char *UNC;
char *UNCip;
- char *in6_addr; /* ipv6 address as human readable form of in6_addr */
+ char *in6_addr; /* ipv6 address as human readable form of in6_addr */
char *iocharset; /* local code page for mapping to and from Unicode */
char source_rfc1001_name[16]; /* netbios name of client */
char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
@@ -75,19 +75,21 @@
bool setuids:1;
bool override_uid:1;
bool override_gid:1;
+ bool dynperm:1;
bool noperm:1;
bool no_psx_acl:1; /* set if posix acl support should be disabled */
bool cifs_acl:1;
bool no_xattr:1; /* set if xattr (EA) support should be disabled*/
bool server_ino:1; /* use inode numbers from server ie UniqueId */
bool direct_io:1;
- bool remap:1; /* set to remap seven reserved chars in filenames */
- bool posix_paths:1; /* unset to not ask for posix pathnames. */
+ bool remap:1; /* set to remap seven reserved chars in filenames */
+ bool posix_paths:1; /* unset to not ask for posix pathnames. */
bool no_linux_ext:1;
bool sfu_emul:1;
- bool nullauth:1; /* attempt to authenticate with null user */
- unsigned nocase; /* request case insensitive filenames */
- unsigned nobrl; /* disable sending byte range locks to srv */
+ bool nullauth:1; /* attempt to authenticate with null user */
+ bool nocase:1; /* request case insensitive filenames */
+ bool nobrl:1; /* disable sending byte range locks to srv */
+ bool seal:1; /* request transport encryption on share */
unsigned int rsize;
unsigned int wsize;
unsigned int sockopt;
@@ -1246,6 +1248,10 @@
vol->setuids = 1;
} else if (strnicmp(data, "nosetuids", 9) == 0) {
vol->setuids = 0;
+ } else if (strnicmp(data, "dynperm", 7) == 0) {
+ vol->dynperm = true;
+ } else if (strnicmp(data, "nodynperm", 9) == 0) {
+ vol->dynperm = false;
} else if (strnicmp(data, "nohard", 6) == 0) {
vol->retry = 0;
} else if (strnicmp(data, "nosoft", 6) == 0) {
@@ -1268,8 +1274,12 @@
vol->no_psx_acl = 1;
} else if (strnicmp(data, "sign", 4) == 0) {
vol->secFlg |= CIFSSEC_MUST_SIGN;
-/* } else if (strnicmp(data, "seal",4) == 0) {
- vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ } else if (strnicmp(data, "seal", 4) == 0) {
+ /* we do not do the following in secFlags because seal
+ is a per tree connection (mount) not a per socket
+ or per-smb connection option in the protocol */
+ /* vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ vol->seal = 1;
} else if (strnicmp(data, "direct", 6) == 0) {
vol->direct_io = 1;
} else if (strnicmp(data, "forcedirectio", 13) == 0) {
@@ -1414,34 +1424,12 @@
}
int
-connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path, const struct nls_table *nls_codepage,
- int remap)
-{
- struct dfs_info3_param *referrals = NULL;
- unsigned int num_referrals;
- int rc = 0;
-
- rc = get_dfs_path(xid, pSesInfo, old_path, nls_codepage,
- &num_referrals, &referrals, remap);
-
- /* BB Add in code to: if valid refrl, if not ip address contact
- the helper that resolves tcp names, mount to it, try to
- tcon to it unmount it if fail */
-
- kfree(referrals);
-
- return rc;
-}
-
-int
get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
const struct nls_table *nls_codepage, unsigned int *pnum_referrals,
struct dfs_info3_param **preferrals, int remap)
{
char *temp_unc;
int rc = 0;
- unsigned char *targetUNCs;
*pnum_referrals = 0;
*preferrals = NULL;
@@ -1464,7 +1452,7 @@
kfree(temp_unc);
}
if (rc == 0)
- rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, &targetUNCs,
+ rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, preferrals,
pnum_referrals, nls_codepage, remap);
/* BB map targetUNCs to dfs_info3 structures, here or
in CIFSGetDFSRefer BB */
@@ -1815,7 +1803,7 @@
if (path == NULL)
return;
- if (delim == '/')
+ if (delim == '/')
old_delim = '\\';
else
old_delim = '/';
@@ -2125,6 +2113,8 @@
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
if (volume_info.override_gid)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
+ if (volume_info.dynperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
if (volume_info.direct_io) {
cFYI(1, ("mounting share using direct i/o"));
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
@@ -2141,6 +2131,9 @@
for the retry flag is used */
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ if (tcon->seal != volume_info.seal)
+ cERROR(1, ("transport encryption setting "
+ "conflicts with existing tid"));
} else {
tcon = tconInfoAlloc();
if (tcon == NULL)
@@ -2154,10 +2147,11 @@
if ((strchr(volume_info.UNC + 3, '\\') == NULL)
&& (strchr(volume_info.UNC + 3, '/') ==
NULL)) {
- rc = connect_to_dfs_path(xid, pSesInfo,
+/* rc = connect_to_dfs_path(xid, pSesInfo,
"", cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFS_MOUNT_MAP_SPECIAL_CHR);*/
+ cFYI(1, ("DFS root not supported"));
rc = -ENODEV;
goto out;
} else {
@@ -2173,6 +2167,7 @@
atomic_inc(&pSesInfo->inUse);
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ tcon->seal = volume_info.seal;
}
}
}
@@ -2314,9 +2309,10 @@
user = ses->userName;
domain = ses->domainName;
smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
+
+ if (smb_buffer == NULL)
return -ENOMEM;
- }
+
smb_buffer_response = smb_buffer;
pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index e4e0078..f0b5b5f 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -49,18 +49,25 @@
struct dentry *temp;
int namelen;
int pplen;
+ int dfsplen;
char *full_path;
char dirsep;
+ struct cifs_sb_info *cifs_sb;
if (direntry == NULL)
return NULL; /* not much we can do if dentry is freed and
we need to reopen the file after it was closed implicitly
when the server crashed */
- dirsep = CIFS_DIR_SEP(CIFS_SB(direntry->d_sb));
- pplen = CIFS_SB(direntry->d_sb)->prepathlen;
+ cifs_sb = CIFS_SB(direntry->d_sb);
+ dirsep = CIFS_DIR_SEP(cifs_sb);
+ pplen = cifs_sb->prepathlen;
+ if (cifs_sb->tcon && (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS))
+ dfsplen = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE + 1);
+ else
+ dfsplen = 0;
cifs_bp_rename_retry:
- namelen = pplen;
+ namelen = pplen + dfsplen;
for (temp = direntry; !IS_ROOT(temp);) {
namelen += (1 + temp->d_name.len);
temp = temp->d_parent;
@@ -91,7 +98,7 @@
return NULL;
}
}
- if (namelen != pplen) {
+ if (namelen != pplen + dfsplen) {
cERROR(1,
("did not end path lookup where expected namelen is %d",
namelen));
@@ -107,7 +114,18 @@
since the '\' is a valid posix character so we can not switch
those safely to '/' if any are found in the middle of the prepath */
/* BB test paths to Windows with '/' in the midst of prepath */
- strncpy(full_path, CIFS_SB(direntry->d_sb)->prepath, pplen);
+
+ if (dfsplen) {
+ strncpy(full_path, cifs_sb->tcon->treeName, dfsplen);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < dfsplen; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+ }
+ strncpy(full_path + dfsplen, CIFS_SB(direntry->d_sb)->prepath, pplen);
return full_path;
}
@@ -590,7 +608,7 @@
* case take precedence. If a is not a negative dentry, this
* should have no side effects
*/
- memcpy(a->name, b->name, a->len);
+ memcpy((void *)a->name, b->name, a->len);
return 0;
}
return 1;
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 939e256..f730ef3 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -134,10 +134,6 @@
rkey = request_key(&key_type_dns_resolver, name, "");
if (!IS_ERR(rkey)) {
data = rkey->payload.data;
- cFYI(1, ("%s: resolved: %s to %s", __func__,
- rkey->description,
- *ip_addr
- ));
} else {
cERROR(1, ("%s: unable to resolve: %s", __func__, name));
goto out;
@@ -150,6 +146,11 @@
if (*ip_addr) {
memcpy(*ip_addr, data, len);
(*ip_addr)[len] = '\0';
+ if (!IS_ERR(rkey))
+ cFYI(1, ("%s: resolved: %s to %s", __func__,
+ name,
+ *ip_addr
+ ));
rc = 0;
} else {
rc = -ENOMEM;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 31a0a33..8636cec 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -75,7 +75,11 @@
return (GENERIC_READ | GENERIC_WRITE);
}
- return 0x20197;
+ return (READ_CONTROL | FILE_WRITE_ATTRIBUTES | FILE_READ_ATTRIBUTES |
+ FILE_WRITE_EA | FILE_APPEND_DATA | FILE_WRITE_DATA |
+ FILE_READ_DATA);
+
+
}
static inline int cifs_get_disposition(unsigned int flags)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index fcbdbb6..129dbfe 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -161,118 +161,115 @@
spin_unlock(&inode->i_lock);
}
-static const unsigned char *cifs_get_search_path(struct cifs_sb_info *cifs_sb,
- const char *search_path)
+
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
+ struct super_block *sb)
{
- int tree_len;
- int path_len;
- int i;
- char *tmp_path;
- struct cifsTconInfo *pTcon = cifs_sb->tcon;
+ struct inode *pinode = NULL;
- if (!(pTcon->Flags & SMB_SHARE_IS_IN_DFS))
- return search_path;
+ memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
- /* use full path name for working with DFS */
- tree_len = strnlen(pTcon->treeName, MAX_TREE_SIZE + 1);
- path_len = strnlen(search_path, MAX_PATHCONF);
+/* __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
+ __u64 UniqueId = 0; */
+ pfnd_dat->LastStatusChange =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastModificationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
+ pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
+ pfnd_dat->Nlinks = cpu_to_le64(2);
+ if (sb->s_root)
+ pinode = sb->s_root->d_inode;
+ if (pinode == NULL)
+ return;
- tmp_path = kmalloc(tree_len+path_len+1, GFP_KERNEL);
- if (tmp_path == NULL)
- return search_path;
-
- strncpy(tmp_path, pTcon->treeName, tree_len);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < tree_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncpy(tmp_path+tree_len, search_path, path_len);
- tmp_path[tree_len+path_len] = 0;
- return tmp_path;
+ /* fill in default values for the remaining based on root
+ inode since we can not query the server for this inode info */
+ pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
+ pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
+ pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
+ pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
}
int cifs_get_inode_info_unix(struct inode **pinode,
- const unsigned char *search_path, struct super_block *sb, int xid)
+ const unsigned char *full_path, struct super_block *sb, int xid)
{
int rc = 0;
- FILE_UNIX_BASIC_INFO findData;
+ FILE_UNIX_BASIC_INFO find_data;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path;
bool is_dfs_referral = false;
+ struct cifsInodeInfo *cifsInfo;
+ __u64 num_of_bytes;
+ __u64 end_of_file;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBUnixQPathInfo:
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &findData,
+ rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-/* dump_mem("\nUnixQPathInfo return data", &findData,
- sizeof(findData)); */
if (rc) {
if (rc == -EREMOTE && !is_dfs_referral) {
is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBUnixQPathInfo;
+ cFYI(DBG2, ("DFS ref"));
+ /* for DFS, server does not give us real inode data */
+ fill_fake_finddataunix(&find_data, sb);
+ rc = 0;
}
- goto cgiiu_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
- __u64 end_of_file = le64_to_cpu(findData.EndOfFile);
-
- /* get new inode */
- if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgiiu_exit;
- }
- /* Is an i_ino of zero legal? */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- (*pinode)->i_ino =
- (unsigned long)findData.UniqueId;
- } /* note ino incremented to unique num in new_inode */
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(*pinode);
- }
-
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
-
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
- /* this is ok to set on every inode revalidate */
- atomic_set(&cifsInfo->inUse, 1);
-
- cifs_unix_info_to_inode(inode, &findData, 0);
-
-
- if (num_of_bytes < end_of_file)
- cFYI(1, ("allocation size less than end of file"));
- cFYI(1, ("Size %ld and blocks %llu",
- (unsigned long) inode->i_size,
- (unsigned long long)inode->i_blocks));
-
- cifs_set_ops(inode, is_dfs_referral);
}
+ num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
+ end_of_file = le64_to_cpu(find_data.EndOfFile);
+
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgiiu_exit;
+ }
+ /* Is an i_ino of zero legal? */
+ /* note ino incremented to unique num in new_inode */
+ /* Are there sanity checks we can use to ensure that
+ the server is really filling in that field? */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
+
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
+
+ insert_inode_hash(*pinode);
+ }
+
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+ /* this is ok to set on every inode revalidate */
+ atomic_set(&cifsInfo->inUse, 1);
+
+ cifs_unix_info_to_inode(inode, &find_data, 0);
+
+ if (num_of_bytes < end_of_file)
+ cFYI(1, ("allocation size less than end of file"));
+ cFYI(1, ("Size %ld and blocks %llu",
+ (unsigned long) inode->i_size,
+ (unsigned long long)inode->i_blocks));
+
+ cifs_set_ops(inode, is_dfs_referral);
cgiiu_exit:
- if (full_path != search_path)
- kfree(full_path);
return rc;
}
@@ -379,21 +376,51 @@
#endif
}
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
+ struct super_block *sb)
+{
+ memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
+
+/* __le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
+ __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __u8 pfnd_dat->DeletePending = 0;
+ __u8 pfnd_data->Directory = 0;
+ __le32 pfnd_dat->EASize = 0;
+ __u64 pfnd_dat->IndexNumber = 0;
+ __u64 pfnd_dat->IndexNumber1 = 0; */
+ pfnd_dat->CreationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastWriteTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->ChangeTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
+ pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+}
+
int cifs_get_inode_info(struct inode **pinode,
- const unsigned char *search_path, FILE_ALL_INFO *pfindData,
+ const unsigned char *full_path, FILE_ALL_INFO *pfindData,
struct super_block *sb, int xid, const __u16 *pfid)
{
int rc = 0;
+ __u32 attr;
+ struct cifsInodeInfo *cifsInfo;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path = NULL;
char *buf = NULL;
bool adjustTZ = false;
bool is_dfs_referral = false;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
if ((pfindData == NULL) && (*pinode != NULL)) {
if (CIFS_I(*pinode)->clientCanCacheRead) {
@@ -409,9 +436,6 @@
return -ENOMEM;
pfindData = (FILE_ALL_INFO *)buf;
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBQPathInfo:
/* could do find first instead but this returns more info */
rc = CIFSSMBQPathInfo(xid, pTcon, full_path, pfindData,
0 /* not legacy */,
@@ -429,178 +453,168 @@
}
}
/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
- if (rc) {
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBQPathInfo;
- }
+ if (rc == -EREMOTE) {
+ is_dfs_referral = true;
+ fill_fake_finddata(pfindData, sb);
+ rc = 0;
+ } else if (rc)
goto cgii_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u32 attr = le32_to_cpu(pfindData->Attributes);
- /* get new inode */
+ attr = le32_to_cpu(pfindData->Attributes);
+
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
- /* Is an i_ino of zero legal? Can we use that to check
- if the server supports returning inode numbers? Are
- there other sanity checks we can use to ensure that
- the server is really filling in that field? */
+ rc = -ENOMEM;
+ goto cgii_exit;
+ }
+ /* Is an i_ino of zero legal? Can we use that to check
+ if the server supports returning inode numbers? Are
+ there other sanity checks we can use to ensure that
+ the server is really filling in that field? */
- /* We can not use the IndexNumber field by default from
- Windows or Samba (in ALL_INFO buf) but we can request
- it explicitly. It may not be unique presumably if
- the server has multiple devices mounted under one
- share */
+ /* We can not use the IndexNumber field by default from
+ Windows or Samba (in ALL_INFO buf) but we can request
+ it explicitly. It may not be unique presumably if
+ the server has multiple devices mounted under one share */
- /* There may be higher info levels that work but are
- there Windows server or network appliances for which
- IndexNumber field is not guaranteed unique? */
+ /* There may be higher info levels that work but are
+ there Windows server or network appliances for which
+ IndexNumber field is not guaranteed unique? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- int rc1 = 0;
- __u64 inode_num;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ int rc1 = 0;
+ __u64 inode_num;
- rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- search_path, &inode_num,
+ rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
+ full_path, &inode_num,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc1) {
- cFYI(1, ("GetSrvInodeNum rc %d", rc1));
- /* BB EOPNOSUPP disable SERVER_INUM? */
- } else /* do we need cast or hash to ino? */
- (*pinode)->i_ino = inode_num;
- } /* else ino incremented to unique num in new_inode*/
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- insert_inode_hash(*pinode);
- }
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
- cifsInfo->cifsAttrs = attr;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* Linux can not store file creation time so ignore it */
- if (pfindData->LastAccessTime)
- inode->i_atime = cifs_NTtimeToUnix
- (le64_to_cpu(pfindData->LastAccessTime));
- else /* do not need to use current_fs_time - time not stored */
- inode->i_atime = CURRENT_TIME;
- inode->i_mtime =
- cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
- inode->i_ctime =
- cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
- cFYI(0, ("Attributes came in as 0x%x", attr));
- if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
- inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
- inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
- }
-
- /* set default mode. will override for dirs below */
- if (atomic_read(&cifsInfo->inUse) == 0)
- /* new inode, can safely set these fields */
- inode->i_mode = cifs_sb->mnt_file_mode;
- else /* since we set the inode type below we need to mask off
- to avoid strange results if type changes and both
- get orred in */
- inode->i_mode &= ~S_IFMT;
-/* if (attr & ATTR_REPARSE) */
- /* We no longer handle these as symlinks because we could not
- follow them due to the absolute path with drive letter */
- if (attr & ATTR_DIRECTORY) {
- /* override default perms since we do not do byte range locking
- on dirs */
- inode->i_mode = cifs_sb->mnt_dir_mode;
- inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
- /* No need to le64 convert size of zero */
- (pfindData->EndOfFile == 0)) {
- inode->i_mode = cifs_sb->mnt_file_mode;
- inode->i_mode |= S_IFIFO;
-/* BB Finish for SFU style symlinks and devices */
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
- if (decode_sfu_inode(inode,
- le64_to_cpu(pfindData->EndOfFile),
- search_path,
- cifs_sb, xid))
- cFYI(1, ("Unrecognized sfu inode type"));
-
- cFYI(1, ("sfu mode 0%o", inode->i_mode));
- } else {
- inode->i_mode |= S_IFREG;
- /* treat the dos attribute of read-only as read-only
- mode e.g. 555 */
- if (cifsInfo->cifsAttrs & ATTR_READONLY)
- inode->i_mode &= ~(S_IWUGO);
- else if ((inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been */
- /* changed on server -- set any w bits */
- /* allowed by mnt_file_mode */
- inode->i_mode |= (S_IWUGO &
- cifs_sb->mnt_file_mode);
- /* BB add code here -
- validate if device or weird share or device type? */
- }
-
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
- /* can not safely shrink the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
-
- /* 512 bytes (2**9) is the fake blocksize that must be
- used for this calculation */
- inode->i_blocks = (512 - 1 + le64_to_cpu(
- pfindData->AllocationSize)) >> 9;
- }
- spin_unlock(&inode->i_lock);
-
- inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- /* fill in 0777 bits from ACL */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(inode, search_path, pfid);
- }
-#endif
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- /* fill in remaining high mode bits e.g. SUID, VTX */
- get_sfu_mode(inode, search_path, cifs_sb, xid);
- } else if (atomic_read(&cifsInfo->inUse) == 0) {
- inode->i_uid = cifs_sb->mnt_uid;
- inode->i_gid = cifs_sb->mnt_gid;
- /* set so we do not keep refreshing these fields with
- bad data after user has changed them in memory */
- atomic_set(&cifsInfo->inUse, 1);
- }
-
- cifs_set_ops(inode, is_dfs_referral);
+ if (rc1) {
+ cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ /* BB EOPNOSUPP disable SERVER_INUM? */
+ } else /* do we need cast or hash to ino? */
+ (*pinode)->i_ino = inode_num;
+ } /* else ino incremented to unique num in new_inode*/
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
+ insert_inode_hash(*pinode);
}
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+ cifsInfo->cifsAttrs = attr;
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+
+ /* blksize needs to be multiple of two. So safer to default to
+ blksize and blkbits set in superblock so 2**blkbits and blksize
+ will match rather than setting to:
+ (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
+
+ /* Linux can not store file creation time so ignore it */
+ if (pfindData->LastAccessTime)
+ inode->i_atime = cifs_NTtimeToUnix
+ (le64_to_cpu(pfindData->LastAccessTime));
+ else /* do not need to use current_fs_time - time not stored */
+ inode->i_atime = CURRENT_TIME;
+ inode->i_mtime =
+ cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
+ inode->i_ctime =
+ cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
+ cFYI(DBG2, ("Attributes came in as 0x%x", attr));
+ if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
+ inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
+ inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
+ }
+
+ /* set default mode. will override for dirs below */
+ if (atomic_read(&cifsInfo->inUse) == 0)
+ /* new inode, can safely set these fields */
+ inode->i_mode = cifs_sb->mnt_file_mode;
+ else /* since we set the inode type below we need to mask off
+ to avoid strange results if type changes and both
+ get orred in */
+ inode->i_mode &= ~S_IFMT;
+/* if (attr & ATTR_REPARSE) */
+ /* We no longer handle these as symlinks because we could not
+ follow them due to the absolute path with drive letter */
+ if (attr & ATTR_DIRECTORY) {
+ /* override default perms since we do not do byte range locking
+ on dirs */
+ inode->i_mode = cifs_sb->mnt_dir_mode;
+ inode->i_mode |= S_IFDIR;
+ } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
+ (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
+ /* No need to le64 convert size of zero */
+ (pfindData->EndOfFile == 0)) {
+ inode->i_mode = cifs_sb->mnt_file_mode;
+ inode->i_mode |= S_IFIFO;
+/* BB Finish for SFU style symlinks and devices */
+ } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
+ (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
+ if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile),
+ full_path, cifs_sb, xid))
+ cFYI(1, ("Unrecognized sfu inode type"));
+
+ cFYI(1, ("sfu mode 0%o", inode->i_mode));
+ } else {
+ inode->i_mode |= S_IFREG;
+ /* treat dos attribute of read-only as read-only mode eg 555 */
+ if (cifsInfo->cifsAttrs & ATTR_READONLY)
+ inode->i_mode &= ~(S_IWUGO);
+ else if ((inode->i_mode & S_IWUGO) == 0)
+ /* the ATTR_READONLY flag may have been */
+ /* changed on server -- set any w bits */
+ /* allowed by mnt_file_mode */
+ inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
+ /* BB add code to validate if device or weird share or device type? */
+ }
+
+ spin_lock(&inode->i_lock);
+ if (is_size_safe_to_change(cifsInfo,
+ le64_to_cpu(pfindData->EndOfFile))) {
+ /* can not safely shrink the file size here if the
+ client is writing to it due to potential races */
+ i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+
+ /* 512 bytes (2**9) is the fake blocksize that must be
+ used for this calculation */
+ inode->i_blocks = (512 - 1 + le64_to_cpu(
+ pfindData->AllocationSize)) >> 9;
+ }
+ spin_unlock(&inode->i_lock);
+
+ inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
+
+ /* BB fill in uid and gid here? with help from winbind?
+ or retrieve from NTFS stream extended attribute */
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ /* fill in 0777 bits from ACL */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ cFYI(1, ("Getting mode bits from ACL"));
+ acl_to_uid_mode(inode, full_path, pfid);
+ }
+#endif
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+ /* fill in remaining high mode bits e.g. SUID, VTX */
+ get_sfu_mode(inode, full_path, cifs_sb, xid);
+ } else if (atomic_read(&cifsInfo->inUse) == 0) {
+ inode->i_uid = cifs_sb->mnt_uid;
+ inode->i_gid = cifs_sb->mnt_gid;
+ /* set so we do not keep refreshing these fields with
+ bad data after user has changed them in memory */
+ atomic_set(&cifsInfo->inUse, 1);
+ }
+
+ cifs_set_ops(inode, is_dfs_referral);
+
+
+
+
cgii_exit:
- if (full_path != search_path)
- kfree(full_path);
kfree(buf);
return rc;
}
@@ -1502,8 +1516,7 @@
int oplock = 0;
rc = SMBLegacyOpen(xid, pTcon, full_path,
- FILE_OPEN,
- SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+ FILE_OPEN, GENERIC_WRITE,
CREATE_NOT_DIR, &netfid, &oplock,
NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 5c792df..0088a5b 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -30,9 +30,9 @@
#define CIFS_IOC_CHECKUMOUNT _IO(0xCF, 2)
-int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg)
+long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
{
+ struct inode *inode = filep->f_dentry->d_inode;
int rc = -ENOTTY; /* strange error - but the precedent */
int xid;
struct cifs_sb_info *cifs_sb;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 1c2c3ce..63f6440 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -234,7 +234,6 @@
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
char *full_path = NULL;
- char *tmp_path = NULL;
char *tmpbuffer;
int len;
__u16 fid;
@@ -295,45 +294,9 @@
cFYI(1, ("Error closing junction point "
"(open for ioctl)"));
}
- /* BB unwind this long, nested function, or remove BB */
- if (rc == -EIO) {
- /* Query if DFS Junction */
- unsigned int num_referrals = 0;
- struct dfs_info3_param *refs = NULL;
- tmp_path =
- kmalloc(MAX_TREE_SIZE + MAX_PATHCONF + 1,
- GFP_KERNEL);
- if (tmp_path) {
- strncpy(tmp_path, pTcon->treeName,
- MAX_TREE_SIZE);
- strncat(tmp_path, full_path,
- MAX_PATHCONF);
- rc = get_dfs_path(xid, pTcon->ses,
- tmp_path,
- cifs_sb->local_nls,
- &num_referrals, &refs,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- cFYI(1, ("Get DFS for %s rc = %d ",
- tmp_path, rc));
- if ((num_referrals == 0) && (rc == 0))
- rc = -EACCES;
- else {
- cFYI(1, ("num referral: %d",
- num_referrals));
- if (refs && refs->path_name) {
- strncpy(tmpbuffer,
- refs->path_name,
- len-1);
- }
- }
- kfree(refs);
- kfree(tmp_path);
-}
- /* BB add code like else decode referrals
- then memcpy to tmpbuffer and free referrals
- string array BB */
- }
+ /* If it is a DFS junction earlier we would have gotten
+ PATH_NOT_COVERED returned from server so we do
+ not need to request the DFS info here */
}
}
/* BB Anything else to do to handle recursive links? */
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 00f4cff..8703d68 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -141,11 +141,11 @@
int ret = 0;
/* calculate length by finding first slash or NULL */
- if (address_family == AF_INET) {
+ if (address_family == AF_INET)
ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
- } else if (address_family == AF_INET6) {
+ else if (address_family == AF_INET6)
ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
- }
+
cFYI(DBG2, ("address conversion returned %d for %s", ret, cp));
if (ret > 0)
ret = 1;
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index 7170a9b..c377d80 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -64,7 +64,7 @@
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
@@ -74,7 +74,7 @@
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 34ec321..713c251 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -670,8 +670,11 @@
(index_to_find < first_entry_in_buffer)) {
/* close and restart search */
cFYI(1, ("search backing up - close and restart search"));
- cifsFile->invalidHandle = true;
- CIFSFindClose(xid, pTcon, cifsFile->netfid);
+ if (!cifsFile->srch_inf.endOfSearch &&
+ !cifsFile->invalidHandle) {
+ cifsFile->invalidHandle = true;
+ CIFSFindClose(xid, pTcon, cifsFile->netfid);
+ }
kfree(cifsFile->search_resume_name);
cifsFile->search_resume_name = NULL;
if (cifsFile->srch_inf.ntwrk_buf_start) {
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index cd62d75..e2832bc 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1906,9 +1906,9 @@
goto out;
}
}
- mutex_unlock(&key_tfm_list_mutex);
(*tfm) = key_tfm->key_tfm;
(*tfm_mutex) = &key_tfm->key_tfm_mutex;
out:
+ mutex_unlock(&key_tfm_list_mutex);
return rc;
}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 6560da1..50c994a 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -243,7 +243,6 @@
struct ecryptfs_daemon *daemon;
struct ecryptfs_msg_ctx *msg_ctx;
size_t packet_length_size;
- u32 counter_nbo;
char packet_length[3];
size_t i;
size_t total_length;
@@ -328,20 +327,18 @@
"pending message\n", __func__, count, total_length);
goto out_unlock_msg_ctx;
}
- i = 0;
- buf[i++] = msg_ctx->type;
- counter_nbo = cpu_to_be32(msg_ctx->counter);
- memcpy(&buf[i], (char *)&counter_nbo, 4);
- i += 4;
+ rc = -EFAULT;
+ if (put_user(msg_ctx->type, buf))
+ goto out_unlock_msg_ctx;
+ if (put_user(cpu_to_be32(msg_ctx->counter), (__be32 __user *)(buf + 1)))
+ goto out_unlock_msg_ctx;
+ i = 5;
if (msg_ctx->msg) {
- memcpy(&buf[i], packet_length, packet_length_size);
- i += packet_length_size;
- rc = copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size);
- if (rc) {
- printk(KERN_ERR "%s: copy_to_user returned error "
- "[%d]\n", __func__, rc);
+ if (copy_to_user(&buf[i], packet_length, packet_length_size))
goto out_unlock_msg_ctx;
- }
+ i += packet_length_size;
+ if (copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size))
+ goto out_unlock_msg_ctx;
i += msg_ctx->msg_size;
}
rc = i;
@@ -452,7 +449,8 @@
ecryptfs_miscdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- u32 counter_nbo, seq;
+ __be32 counter_nbo;
+ u32 seq;
size_t packet_size, packet_size_length, i;
ssize_t sz = 0;
char *data;
@@ -485,7 +483,7 @@
count);
goto out_free;
}
- memcpy((char *)&counter_nbo, &data[i], 4);
+ memcpy(&counter_nbo, &data[i], 4);
seq = be32_to_cpu(counter_nbo);
i += 4;
rc = ecryptfs_parse_packet_length(&data[i], &packet_size,
diff --git a/fs/exec.c b/fs/exec.c
index 3c2ba7c..9448f1b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -860,6 +860,7 @@
no_thread_group:
exit_itimers(sig);
+ flush_itimer_signals();
if (leader)
release_task(leader);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index fb77e09..43e9951 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -488,7 +488,12 @@
err = bdi_init(&fc->bdi);
if (err)
goto error_kfree;
- err = bdi_register_dev(&fc->bdi, fc->dev);
+ if (sb->s_bdev) {
+ err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+ MAJOR(fc->dev), MINOR(fc->dev));
+ } else {
+ err = bdi_register_dev(&fc->bdi, fc->dev);
+ }
if (err)
goto error_bdi_destroy;
/*
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d31bada..07d84d16 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -249,7 +249,7 @@
struct gfs2_inode *ip = gl->gl_object;
int error = 0;
- if (!ip)
+ if (!ip || (gh->gh_flags & GL_SKIP))
return 0;
if (test_bit(GIF_INVALID, &ip->i_flags)) {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 9c2c0b9..eabe5ea 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -236,6 +236,7 @@
GIF_INVALID = 0,
GIF_QD_LOCKED = 1,
GIF_SW_PAGED = 3,
+ GIF_USER = 4, /* user inode, not metadata addr space */
};
struct gfs2_dinode_host {
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 3a9ef52..09453d0 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -47,8 +47,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
u64 *no_addr = opaque;
- if (ip->i_no_addr == *no_addr &&
- inode->i_private != NULL)
+ if (ip->i_no_addr == *no_addr && test_bit(GIF_USER, &ip->i_flags))
return 1;
return 0;
@@ -61,6 +60,7 @@
inode->i_ino = (unsigned long)*no_addr;
ip->i_no_addr = *no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
@@ -86,7 +86,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_skip_data *data = opaque;
- if (ip->i_no_addr == data->no_addr && inode->i_private != NULL){
+ if (ip->i_no_addr == data->no_addr && test_bit(GIF_USER, &ip->i_flags)){
if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)){
data->skipped = 1;
return 0;
@@ -105,6 +105,7 @@
return 1;
inode->i_ino = (unsigned long)(data->no_addr);
ip->i_no_addr = data->no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
@@ -166,7 +167,7 @@
* Returns: A VFS inode, or an error
*/
-struct inode *gfs2_inode_lookup(struct super_block *sb,
+struct inode *gfs2_inode_lookup(struct super_block *sb,
unsigned int type,
u64 no_addr,
u64 no_formal_ino, int skip_freeing)
@@ -187,7 +188,6 @@
if (inode->i_state & I_NEW) {
struct gfs2_sbd *sdp = GFS2_SB(inode);
- inode->i_private = ip;
ip->i_no_formal_ino = no_formal_ino;
error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 85aea27..78d75f8 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
@@ -69,13 +69,15 @@
struct inode *gfs2_aspace_get(struct gfs2_sbd *sdp)
{
struct inode *aspace;
+ struct gfs2_inode *ip;
aspace = new_inode(sdp->sd_vfs);
if (aspace) {
mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS);
aspace->i_mapping->a_ops = &aspace_aops;
aspace->i_size = ~0ULL;
- aspace->i_private = NULL;
+ ip = GFS2_I(aspace);
+ clear_bit(GIF_USER, &ip->i_flags);
insert_inode_hash(aspace);
}
return aspace;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index ef9c6c4..b2028c8 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -142,8 +142,8 @@
if (!table[0])
table = sdp->sd_vfs->s_id;
- snprintf(sdp->sd_proto_name, GFS2_FSNAME_LEN, "%s", proto);
- snprintf(sdp->sd_table_name, GFS2_FSNAME_LEN, "%s", table);
+ strlcpy(sdp->sd_proto_name, proto, GFS2_FSNAME_LEN);
+ strlcpy(sdp->sd_table_name, table, GFS2_FSNAME_LEN);
table = sdp->sd_table_name;
while ((table = strchr(table, '/')))
diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c
index 2278c68..0b7cc92 100644
--- a/fs/gfs2/ops_super.c
+++ b/fs/gfs2/ops_super.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
@@ -52,7 +52,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
/* Check this is a "normal" inode */
- if (inode->i_private) {
+ if (test_bit(GIF_USER, &ip->i_flags)) {
if (current->flags & PF_MEMALLOC)
return 0;
if (sync)
@@ -297,8 +297,9 @@
*/
static void gfs2_drop_inode(struct inode *inode)
{
- if (inode->i_private && inode->i_nlink) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+
+ if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
@@ -314,12 +315,13 @@
static void gfs2_clear_inode(struct inode *inode)
{
+ struct gfs2_inode *ip = GFS2_I(inode);
+
/* This tells us its a "real" inode and not one which only
* serves to contain an address space (see rgrp.c, meta_io.c)
* which therefore doesn't have its own glocks.
*/
- if (inode->i_private) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ if (test_bit(GIF_USER, &ip->i_flags)) {
ip->i_gl->gl_object = NULL;
gfs2_glock_schedule_for_reclaim(ip->i_gl);
gfs2_glock_put(ip->i_gl);
@@ -419,7 +421,7 @@
struct gfs2_holder gh;
int error;
- if (!inode->i_private)
+ if (!test_bit(GIF_USER, &ip->i_flags))
goto out;
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 7e8f0b1..6387523 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1495,7 +1495,7 @@
al->al_alloced += *n;
- gfs2_statfs_change(sdp, 0, -*n, 0);
+ gfs2_statfs_change(sdp, 0, -(s64)*n, 0);
gfs2_quota_change(ip, *n, ip->i_inode.i_uid, ip->i_inode.i_gid);
spin_lock(&sdp->sd_rindex_spin);
diff --git a/fs/hppfs/Makefile b/fs/hppfs/Makefile
index 8a1f503..3a982bd 100644
--- a/fs/hppfs/Makefile
+++ b/fs/hppfs/Makefile
@@ -3,7 +3,4 @@
# Licensed under the GPL
#
-hppfs-objs := hppfs.o
-
-obj-y =
-obj-$(CONFIG_HPPFS) += $(hppfs-objs)
+obj-$(CONFIG_HPPFS) += hppfs.o
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 0b3ffa9..4d4760e 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -419,9 +419,9 @@
out_release_client:
rpc_shutdown_client(client);
out_err:
- put_nfs4_client(clp);
dprintk("NFSD: warning: no callback path to client %.*s\n",
(int)clp->cl_name.len, clp->cl_name.data);
+ put_nfs4_client(clp);
return status;
}
diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c
index 9101807..e2f72ca 100644
--- a/fs/ntfs/upcase.c
+++ b/fs/ntfs/upcase.c
@@ -77,11 +77,10 @@
uc[i] = cpu_to_le16(i);
for (r = 0; uc_run_table[r][0]; r++)
for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
- uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
- uc_run_table[r][2]);
+ le16_add_cpu(&uc[i], uc_run_table[r][2]);
for (r = 0; uc_dup_table[r][0]; r++)
for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
- uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
+ le16_add_cpu(&uc[i + 1], -1);
for (r = 0; uc_word_table[r][0]; r++)
uc[uc_word_table[r][0]] = cpu_to_le16(uc_word_table[r][1]);
return uc;
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 41f84c9..10bfb46 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -2788,7 +2788,7 @@
BUG_ON(index >= le16_to_cpu(el->l_next_free_rec));
left_rec = &el->l_recs[index];
- if (index == le16_to_cpu(el->l_next_free_rec - 1) &&
+ if (index == le16_to_cpu(el->l_next_free_rec) - 1 &&
le16_to_cpu(el->l_next_free_rec) == le16_to_cpu(el->l_count)) {
/* we meet with a cross extent block merge. */
ret = ocfs2_get_right_path(inode, left_path, &right_path);
@@ -2802,7 +2802,7 @@
BUG_ON(next_free <= 0);
right_rec = &right_el->l_recs[0];
if (ocfs2_is_empty_extent(right_rec)) {
- BUG_ON(le16_to_cpu(next_free) <= 1);
+ BUG_ON(next_free <= 1);
right_rec = &right_el->l_recs[1];
}
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 1e44ad1..a27d615 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -142,53 +142,43 @@
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
-static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
- u32 msgkey, struct task_struct *task, u8 node)
-{
#ifdef CONFIG_DEBUG_FS
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
INIT_LIST_HEAD(&nst->st_net_debug_item);
nst->st_task = task;
nst->st_msg_type = msgtype;
nst->st_msg_key = msgkey;
nst->st_node = node;
-#endif
}
-static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_sock_time);
-#endif
}
-static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_send_time);
-#endif
}
-static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_status_time);
-#endif
}
-static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
struct o2net_sock_container *sc)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_sc = sc;
-#endif
}
-static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_id = msg_id;
-#endif
}
+#endif /* CONFIG_DEBUG_FS */
static inline int o2net_reconnect_delay(void)
{
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index a705d5d..fd6179e 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -128,23 +128,23 @@
void o2net_debug_add_sc(struct o2net_sock_container *sc);
void o2net_debug_del_sc(struct o2net_sock_container *sc);
#else
-static int o2net_debugfs_init(void)
+static inline int o2net_debugfs_init(void)
{
return 0;
}
-static void o2net_debugfs_exit(void)
+static inline void o2net_debugfs_exit(void)
{
}
-static void o2net_debug_add_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_del_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_add_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_add_sc(struct o2net_sock_container *sc)
{
}
-static void o2net_debug_del_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_del_sc(struct o2net_sock_container *sc)
{
}
#endif /* CONFIG_DEBUG_FS */
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 8d58cfe..18307ff 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,10 +224,42 @@
struct timeval st_send_time;
struct timeval st_status_time;
};
+
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node);
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc);
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
+
#else
struct o2net_send_tracking {
u32 dummy;
};
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc)
+{
+}
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+ u32 msg_id)
+{
+}
#endif /* CONFIG_DEBUG_FS */
#endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h
index d34a62a..8c686d2 100644
--- a/fs/ocfs2/dlm/dlmdebug.h
+++ b/fs/ocfs2/dlm/dlmdebug.h
@@ -60,25 +60,25 @@
#else
-static int dlm_debug_init(struct dlm_ctxt *dlm)
+static inline int dlm_debug_init(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_debug_shutdown(struct dlm_ctxt *dlm)
+static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_root(void)
+static inline int dlm_create_debugfs_root(void)
{
return 0;
}
-static void dlm_destroy_debugfs_root(void)
+static inline void dlm_destroy_debugfs_root(void)
{
}
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index b503772..6b97d11 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -61,7 +61,7 @@
* negotiated by the client. The client negotiates based on the maximum
* version advertised in /sys/fs/ocfs2/max_locking_protocol. The major
* number from the "SETV" message must match
- * user_stack.sp_proto->lp_max_version.pv_major, and the minor number
+ * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number
* must be less than or equal to ...->lp_max_version.pv_minor.
*
* Once this information has been set, mounts will be allowed. From this
@@ -153,7 +153,7 @@
struct ocfs2_control_message_down u_down;
};
-static struct ocfs2_stack_plugin user_stack;
+static struct ocfs2_stack_plugin ocfs2_user_plugin;
static atomic_t ocfs2_control_opened;
static int ocfs2_control_this_node = -1;
@@ -399,7 +399,7 @@
char *ptr = NULL;
struct ocfs2_control_private *p = file->private_data;
struct ocfs2_protocol_version *max =
- &user_stack.sp_proto->lp_max_version;
+ &ocfs2_user_plugin.sp_proto->lp_max_version;
if (ocfs2_control_get_handshake_state(file) !=
OCFS2_CONTROL_HANDSHAKE_PROTOCOL)
@@ -680,7 +680,7 @@
struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg);
int status = lksb->sb_status;
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
/*
* For now we're punting on the issue of other non-standard errors
@@ -693,16 +693,16 @@
*/
if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL)
- user_stack.sp_proto->lp_unlock_ast(astarg, 0);
+ ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0);
else
- user_stack.sp_proto->lp_lock_ast(astarg);
+ ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg);
}
static void fsdlm_blocking_ast_wrapper(void *astarg, int level)
{
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
- user_stack.sp_proto->lp_blocking_ast(astarg, level);
+ ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level);
}
static int user_dlm_lock(struct ocfs2_cluster_connection *conn,
@@ -838,7 +838,7 @@
return 0;
}
-static struct ocfs2_stack_operations user_stack_ops = {
+static struct ocfs2_stack_operations ocfs2_user_plugin_ops = {
.connect = user_cluster_connect,
.disconnect = user_cluster_disconnect,
.this_node = user_cluster_this_node,
@@ -849,20 +849,20 @@
.dump_lksb = user_dlm_dump_lksb,
};
-static struct ocfs2_stack_plugin user_stack = {
+static struct ocfs2_stack_plugin ocfs2_user_plugin = {
.sp_name = "user",
- .sp_ops = &user_stack_ops,
+ .sp_ops = &ocfs2_user_plugin_ops,
.sp_owner = THIS_MODULE,
};
-static int __init user_stack_init(void)
+static int __init ocfs2_user_plugin_init(void)
{
int rc;
rc = ocfs2_control_init();
if (!rc) {
- rc = ocfs2_stack_glue_register(&user_stack);
+ rc = ocfs2_stack_glue_register(&ocfs2_user_plugin);
if (rc)
ocfs2_control_exit();
}
@@ -870,14 +870,14 @@
return rc;
}
-static void __exit user_stack_exit(void)
+static void __exit ocfs2_user_plugin_exit(void)
{
- ocfs2_stack_glue_unregister(&user_stack);
+ ocfs2_stack_glue_unregister(&ocfs2_user_plugin);
ocfs2_control_exit();
}
MODULE_AUTHOR("Oracle");
MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks");
MODULE_LICENSE("GPL");
-module_init(user_stack_init);
-module_exit(user_stack_exit);
+module_init(ocfs2_user_plugin_init);
+module_exit(ocfs2_user_plugin_exit);
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 6f4e8dc..b08d100 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -425,7 +425,8 @@
}
}
unlock_new_inode(inode);
- }
+ } else
+ module_put(de->owner);
return inode;
out_ino:
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 74a323d..32dc14c 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -139,7 +139,7 @@
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_read(&vm_committed_space);
+ committed = atomic_long_read(&vm_committed_space);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
diff --git a/fs/splice.c b/fs/splice.c
index 7815003..aa5f6f6 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -58,8 +58,8 @@
*/
wait_on_page_writeback(page);
- if (PagePrivate(page))
- try_to_release_page(page, GFP_KERNEL);
+ if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
+ goto out_unlock;
/*
* If we succeeded in removing the mapping, set LRU flag
@@ -75,6 +75,7 @@
* Raced with truncate or failed to remove page from current
* address space, unlock and return failure.
*/
+out_unlock:
unlock_page(page);
return 1;
}
@@ -983,7 +984,7 @@
while (len) {
size_t read_len;
- loff_t pos = sd->pos;
+ loff_t pos = sd->pos, prev_pos = pos;
ret = do_splice_to(in, &pos, pipe, len, flags);
if (unlikely(ret <= 0))
@@ -998,15 +999,19 @@
* could get stuck data in the internal pipe:
*/
ret = actor(pipe, sd);
- if (unlikely(ret <= 0))
+ if (unlikely(ret <= 0)) {
+ sd->pos = prev_pos;
goto out_release;
+ }
bytes += ret;
len -= ret;
sd->pos = pos;
- if (ret < read_len)
+ if (ret < read_len) {
+ sd->pos = prev_pos + ret;
goto out_release;
+ }
}
done:
@@ -1072,7 +1077,7 @@
ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
if (ret > 0)
- *ppos += ret;
+ *ppos = sd.pos;
return ret;
}
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index a1c3a1f..8c0e4b9 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -419,12 +419,8 @@
*/
int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
- if (sysfs_find_dirent(acxt->parent_sd, sd->s_name)) {
- printk(KERN_WARNING "sysfs: duplicate filename '%s' "
- "can not be created\n", sd->s_name);
- WARN_ON(1);
+ if (sysfs_find_dirent(acxt->parent_sd, sd->s_name))
return -EEXIST;
- }
sd->s_parent = sysfs_get(acxt->parent_sd);
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 5105015..98e0e86 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -387,6 +387,8 @@
if (unlikely(page == NULL)) {
if (flags & XBF_READ_AHEAD) {
bp->b_page_count = i;
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
return -ENOMEM;
}
@@ -416,17 +418,24 @@
ASSERT(!PagePrivate(page));
if (!PageUptodate(page)) {
page_count--;
- if (blocksize < PAGE_CACHE_SIZE && !PagePrivate(page)) {
+ if (blocksize >= PAGE_CACHE_SIZE) {
+ if (flags & XBF_READ)
+ bp->b_flags |= _XBF_PAGE_LOCKED;
+ } else if (!PagePrivate(page)) {
if (test_page_region(page, offset, nbytes))
page_count++;
}
}
- unlock_page(page);
bp->b_pages[i] = page;
offset = 0;
}
+ if (!(bp->b_flags & _XBF_PAGE_LOCKED)) {
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
+ }
+
if (page_count == bp->b_page_count)
bp->b_flags |= XBF_DONE;
@@ -746,6 +755,7 @@
bp->b_count_desired = len;
bp->b_buffer_length = buflen;
bp->b_flags |= XBF_MAPPED;
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
return 0;
}
@@ -1093,8 +1103,10 @@
xfs_buf_t *bp,
int schedule)
{
- if (atomic_dec_and_test(&bp->b_io_remaining) == 1)
+ if (atomic_dec_and_test(&bp->b_io_remaining) == 1) {
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
xfs_buf_ioend(bp, schedule);
+ }
}
STATIC void
@@ -1125,6 +1137,9 @@
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
+
+ if (bp->b_flags & _XBF_PAGE_LOCKED)
+ unlock_page(page);
} while (bvec >= bio->bi_io_vec);
_xfs_buf_ioend(bp, 1);
@@ -1163,7 +1178,8 @@
* filesystem block size is not smaller than the page size.
*/
if ((bp->b_buffer_length < PAGE_CACHE_SIZE) &&
- (bp->b_flags & XBF_READ) &&
+ ((bp->b_flags & (XBF_READ|_XBF_PAGE_LOCKED)) ==
+ (XBF_READ|_XBF_PAGE_LOCKED)) &&
(blocksize >= PAGE_CACHE_SIZE)) {
bio = bio_alloc(GFP_NOIO, 1);
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 841d788..f948ec7 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -66,6 +66,25 @@
_XBF_PAGES = (1 << 18), /* backed by refcounted pages */
_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue */
_XBF_DELWRI_Q = (1 << 21), /* buffer on delwri queue */
+
+ /*
+ * Special flag for supporting metadata blocks smaller than a FSB.
+ *
+ * In this case we can have multiple xfs_buf_t on a single page and
+ * need to lock out concurrent xfs_buf_t readers as they only
+ * serialise access to the buffer.
+ *
+ * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+ * between reads of the page. Hence we can have one thread read the
+ * page and modify it, but then race with another thread that thinks
+ * the page is not up-to-date and hence reads it again.
+ *
+ * The result is that the first modifcation to the page is lost.
+ * This sort of AGF/AGI reading race can happen when unlinking inodes
+ * that require truncation and results in the AGI unlinked list
+ * modifications being lost.
+ */
+ _XBF_PAGE_LOCKED = (1 << 22),
} xfs_buf_flags_t;
typedef enum {
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 65e78c1..5f60363 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -184,19 +184,24 @@
return -xfs_release(XFS_I(inode));
}
+/*
+ * We ignore the datasync flag here because a datasync is effectively
+ * identical to an fsync. That is, datasync implies that we need to write
+ * only the metadata needed to be able to access the data that is written
+ * if we crash after the call completes. Hence if we are writing beyond
+ * EOF we have to log the inode size change as well, which makes it a
+ * full fsync. If we don't write beyond EOF, the inode core will be
+ * clean in memory and so we don't need to log the inode, just like
+ * fsync.
+ */
STATIC int
xfs_file_fsync(
struct file *filp,
struct dentry *dentry,
int datasync)
{
- int flags = FSYNC_WAIT;
-
- if (datasync)
- flags |= FSYNC_DATA;
xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED);
- return -xfs_fsync(XFS_I(dentry->d_inode), flags,
- (xfs_off_t)0, (xfs_off_t)-1);
+ return -xfs_fsync(XFS_I(dentry->d_inode));
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 9d73cb5..25eb2a9 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -230,14 +230,6 @@
#define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */
/*
- * Flags to vop_fsync/reclaim.
- */
-#define FSYNC_NOWAIT 0 /* asynchronous flush */
-#define FSYNC_WAIT 0x1 /* synchronous fsync or forced reclaim */
-#define FSYNC_INVAL 0x2 /* flush and invalidate cached data */
-#define FSYNC_DATA 0x4 /* synchronous fsync of data only */
-
-/*
* Tracking vnode activity.
*/
#if defined(XFS_INODE_TRACE)
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index cf0bb9c..e569bf5 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2974,6 +2974,7 @@
xfs_mount_t *mp = ip->i_mount;
xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino);
unsigned long first_index, mask;
+ unsigned long inodes_per_cluster;
int ilist_size;
xfs_inode_t **ilist;
xfs_inode_t *iq;
@@ -2985,8 +2986,9 @@
ASSERT(pag->pagi_inodeok);
ASSERT(pag->pag_ici_init);
- ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *);
- ilist = kmem_alloc(ilist_size, KM_MAYFAIL);
+ inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
+ ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
+ ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS);
if (!ilist)
return 0;
@@ -2995,8 +2997,7 @@
read_lock(&pag->pag_ici_lock);
/* really need a gang lookup range call here */
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist,
- first_index,
- XFS_INODE_CLUSTER_SIZE(mp));
+ first_index, inodes_per_cluster);
if (nr_found == 0)
goto out_free;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 70702a6..e475e37 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -856,18 +856,14 @@
/*
* xfs_fsync
*
- * This is called to sync the inode and its data out to disk.
- * We need to hold the I/O lock while flushing the data, and
- * the inode lock while flushing the inode. The inode lock CANNOT
- * be held while flushing the data, so acquire after we're done
- * with that.
+ * This is called to sync the inode and its data out to disk. We need to hold
+ * the I/O lock while flushing the data, and the inode lock while flushing the
+ * inode. The inode lock CANNOT be held while flushing the data, so acquire
+ * after we're done with that.
*/
int
xfs_fsync(
- xfs_inode_t *ip,
- int flag,
- xfs_off_t start,
- xfs_off_t stop)
+ xfs_inode_t *ip)
{
xfs_trans_t *tp;
int error;
@@ -875,103 +871,79 @@
xfs_itrace_entry(ip);
- ASSERT(start >= 0 && stop >= -1);
-
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return XFS_ERROR(EIO);
- if (flag & FSYNC_DATA)
- filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ /* capture size updates in I/O completion before writing the inode. */
+ error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ if (error)
+ return XFS_ERROR(error);
/*
- * We always need to make sure that the required inode state
- * is safe on disk. The vnode might be clean but because
- * of committed transactions that haven't hit the disk yet.
- * Likewise, there could be unflushed non-transactional
- * changes to the inode core that have to go to disk.
+ * We always need to make sure that the required inode state is safe on
+ * disk. The vnode might be clean but we still might need to force the
+ * log because of committed transactions that haven't hit the disk yet.
+ * Likewise, there could be unflushed non-transactional changes to the
+ * inode core that have to go to disk and this requires us to issue
+ * a synchronous transaction to capture these changes correctly.
*
- * The following code depends on one assumption: that
- * any transaction that changes an inode logs the core
- * because it has to change some field in the inode core
- * (typically nextents or nblocks). That assumption
- * implies that any transactions against an inode will
- * catch any non-transactional updates. If inode-altering
- * transactions exist that violate this assumption, the
- * code breaks. Right now, it figures that if the involved
- * update_* field is clear and the inode is unpinned, the
- * inode is clean. Either it's been flushed or it's been
- * committed and the commit has hit the disk unpinning the inode.
- * (Note that xfs_inode_item_format() called at commit clears
- * the update_* fields.)
+ * This code relies on the assumption that if the update_* fields
+ * of the inode are clear and the inode is unpinned then it is clean
+ * and no action is required.
*/
xfs_ilock(ip, XFS_ILOCK_SHARED);
- /* If we are flushing data then we care about update_size
- * being set, otherwise we care about update_core
- */
- if ((flag & FSYNC_DATA) ?
- (ip->i_update_size == 0) :
- (ip->i_update_core == 0)) {
+ if (!(ip->i_update_size || ip->i_update_core)) {
/*
- * Timestamps/size haven't changed since last inode
- * flush or inode transaction commit. That means
- * either nothing got written or a transaction
- * committed which caught the updates. If the
- * latter happened and the transaction hasn't
- * hit the disk yet, the inode will be still
- * be pinned. If it is, force the log.
+ * Timestamps/size haven't changed since last inode flush or
+ * inode transaction commit. That means either nothing got
+ * written or a transaction committed which caught the updates.
+ * If the latter happened and the transaction hasn't hit the
+ * disk yet, the inode will be still be pinned. If it is,
+ * force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (xfs_ipincount(ip)) {
- _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
- XFS_LOG_FORCE |
- ((flag & FSYNC_WAIT)
- ? XFS_LOG_SYNC : 0),
+ error = _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
+ XFS_LOG_FORCE | XFS_LOG_SYNC,
&log_flushed);
} else {
/*
- * If the inode is not pinned and nothing
- * has changed we don't need to flush the
- * cache.
+ * If the inode is not pinned and nothing has changed
+ * we don't need to flush the cache.
*/
changed = 0;
}
- error = 0;
} else {
/*
- * Kick off a transaction to log the inode
- * core to get the updates. Make it
- * sync if FSYNC_WAIT is passed in (which
- * is done by everybody but specfs). The
- * sync transaction will also force the log.
+ * Kick off a transaction to log the inode core to get the
+ * updates. The sync transaction will also force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
- if ((error = xfs_trans_reserve(tp, 0,
- XFS_FSYNC_TS_LOG_RES(ip->i_mount),
- 0, 0, 0))) {
+ error = xfs_trans_reserve(tp, 0,
+ XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+ if (error) {
xfs_trans_cancel(tp, 0);
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
/*
- * Note - it's possible that we might have pushed
- * ourselves out of the way during trans_reserve
- * which would flush the inode. But there's no
- * guarantee that the inode buffer has actually
- * gone out yet (it's delwri). Plus the buffer
- * could be pinned anyway if it's part of an
- * inode in another recent transaction. So we
- * play it safe and fire off the transaction anyway.
+ * Note - it's possible that we might have pushed ourselves out
+ * of the way during trans_reserve which would flush the inode.
+ * But there's no guarantee that the inode buffer has actually
+ * gone out yet (it's delwri). Plus the buffer could be pinned
+ * anyway if it's part of an inode in another recent
+ * transaction. So we play it safe and fire off the
+ * transaction anyway.
*/
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_ihold(tp, ip);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- if (flag & FSYNC_WAIT)
- xfs_trans_set_sync(tp);
+ xfs_trans_set_sync(tp);
error = _xfs_trans_commit(tp, 0, &log_flushed);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 8abe8f1..57335ba 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -18,8 +18,7 @@
int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
struct cred *credp);
int xfs_readlink(struct xfs_inode *ip, char *link);
-int xfs_fsync(struct xfs_inode *ip, int flag, xfs_off_t start,
- xfs_off_t stop);
+int xfs_fsync(struct xfs_inode *ip);
int xfs_release(struct xfs_inode *ip);
int xfs_inactive(struct xfs_inode *ip);
int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
index cd22035..6fac2c8 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/include/asm-arm/arch-omap/board-palmte.h
@@ -14,8 +14,6 @@
#ifndef __OMAP_BOARD_PALMTE_H
#define __OMAP_BOARD_PALMTE_H
-#include <asm/arch/gpio.h>
-
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#define PALMTE_TSC_GPIO 4
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 57523bd..12a5e4d 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -73,6 +73,8 @@
#endif
};
+struct cpufreq_frequency_table;
+
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
};
extern unsigned int mpurate;
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 74cd572..369093a 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
+#include <asm/arch/io.h>
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_OMAP1)
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 86621a0..5ee6a49 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -26,7 +26,6 @@
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
-#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index da57209..91d85b3 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -41,7 +41,6 @@
#include <asm/types.h>
#include <asm/arch/cpu.h>
#endif
-#include <asm/arch/io.h>
#include <asm/arch/serial.h>
/*
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
index 14a344a..762eba5 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -34,9 +34,12 @@
#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
#define COLLIE_GPIO_CO GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
@@ -49,6 +52,7 @@
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 5c22b01..8e05bdb 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -179,10 +179,10 @@
#endif /* STRICT_MM_TYPECHECKS */
-typedef struct page *pgtable_t;
-
#endif /* CONFIG_MMU */
+typedef struct page *pgtable_t;
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 6335de9..514af79 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -48,20 +48,6 @@
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -78,6 +64,21 @@
#include <linux/stringify.h>
#include <linux/irqflags.h>
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index a9248d8..7603383 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -105,13 +105,6 @@
extern void *sram_alloc_with_lsl(size_t, unsigned long);
extern int sram_free_with_lsl(const void*);
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
extern const char bfin_board_name[];
extern unsigned long wall_jiffies;
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02..4725268 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (1)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5..8f7ea11 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -176,6 +176,21 @@
#define ANOMALY_05000315 (1)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08fa..8460ab9 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -132,8 +132,8 @@
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
-
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3ceb..3ad5965 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
#define ANOMALY_05000365 (1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157ca..5c5d7d7 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index 734a1d0..2947764 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h
@@ -31,6 +31,13 @@
#define PAGE_MASK (~(PAGE_SIZE-1))
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define ARCH_KMALLOC_MINALIGN 8
+#define ARCH_SLAB_MINALIGN 8
+
/*****************************************************************************/
/*
* virtual memory layout from kernel's point of view
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index ecf675a..6be061d 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,8 +1,12 @@
#ifndef _ASM_GENERIC_GPIO_H
#define _ASM_GENERIC_GPIO_H
+#include <linux/types.h>
+
#ifdef CONFIG_HAVE_GPIO_LIB
+#include <linux/compiler.h>
+
/* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
* extra memory (for code and for per-GPIO table entries).
@@ -74,7 +78,7 @@
extern const char *gpiochip_is_requested(struct gpio_chip *chip,
unsigned offset);
-extern int __init __must_check gpiochip_reserve(int start, int ngpio);
+extern int __must_check gpiochip_reserve(int start, int ngpio);
/* add/remove chips */
extern int gpiochip_add(struct gpio_chip *chip);
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
index a715430..295fe6a 100644
--- a/include/asm-ia64/patch.h
+++ b/include/asm-ia64/patch.h
@@ -21,6 +21,7 @@
extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
extern void ia64_patch_vtop (unsigned long start, unsigned long end);
extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
extern void ia64_patch_gate (void);
#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
index 4b2a8d4..15f8dcf 100644
--- a/include/asm-ia64/ptrace.h
+++ b/include/asm-ia64/ptrace.h
@@ -76,7 +76,7 @@
# define KERNEL_STACK_SIZE_ORDER 0
#endif
-#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
#define KERNEL_STACK_SIZE IA64_STK_OFFSET
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
index dc42a35..7286e4a 100644
--- a/include/asm-ia64/sections.h
+++ b/include/asm-ia64/sections.h
@@ -10,6 +10,7 @@
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
extern char __start_gate_section[];
diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h
index 01b2f92..3a492f2 100644
--- a/include/asm-mips/gic.h
+++ b/include/asm-mips/gic.h
@@ -330,7 +330,7 @@
#define GIC_SH_RMASK_OFS 0x0300
#define GIC_CLR_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index 363a14e..1b5064d 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1036,7 +1036,7 @@
#define USBD_INTSTAT 0xB020001C
# define USBDEV_INT_SOF (1 << 12)
# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
#define USBD_CONFIG 0xB0200020
diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h
index efbbef8..f6f63d4 100644
--- a/include/asm-mn10300/ipcbuf.h
+++ b/include/asm-mn10300/ipcbuf.h
@@ -1,4 +1,4 @@
-#ifndef _ASM_IPCBUF_H_
+#ifndef _ASM_IPCBUF_H
#define _ASM_IPCBUF_H
/*
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e0062d7..8918948 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -100,7 +100,7 @@
{ \
type ret; \
__asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \
- : "=r" (ret) : "r" (addr), "m" (*addr)); \
+ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
return ret; \
}
@@ -108,8 +108,8 @@
static inline void name(volatile type __iomem *addr, type val) \
{ \
__asm__ __volatile__("sync;" insn \
- : "=m" (*addr) : "r" (val), "r" (addr)); \
- IO_SET_SYNC_FLAG(); \
+ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
}
@@ -333,7 +333,8 @@
" .long 3b,5b\n" \
".previous" \
: "=&r" (x) \
- : "r" (port + _IO_BASE)); \
+ : "r" (port + _IO_BASE) \
+ : "memory"); \
return x; \
}
@@ -350,7 +351,8 @@
" .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
- : : "r" (val), "r" (port + _IO_BASE)); \
+ : : "r" (val), "r" (port + _IO_BASE) \
+ : "memory"); \
}
__do_in_asm(_rec_inb, "lbzx")
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 943c5a3..a4d0f87 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -428,12 +428,11 @@
*/
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+/* Change the priority of an interrupt. Default is 8 for irqs and
* 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
* IPI number is then the offset'ed (linux irq number mapped to the IPI)
*/
extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
/* Setup a non-boot CPU */
extern void mpic_setup_this_cpu(void);
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 0e959e2..41c5476 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -40,7 +40,13 @@
#ifndef __ASSEMBLY__
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
typedef u32 dma_addr_t;
+#endif
#ifndef __s390x__
typedef union {
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
index 4bc8357..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/include/asm-sh/checksum_32.h
@@ -109,7 +109,7 @@
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
: "1" (iph), "2" (ihl)
- : "t");
+ : "t", "memory");
return csum_fold(sum);
}
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 6b722d3..37672f7 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -193,6 +193,8 @@
#else /* CONFIG_X86_32 */
+extern void finit(void);
+
static inline void tolerant_fwait(void)
{
asm volatile("fnclex ; fwait");
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index b381f4a..dc936dd 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -10,8 +10,16 @@
#ifdef __KERNEL__
-#define PHYSICAL_PAGE_MASK (PAGE_MASK & __PHYSICAL_MASK)
-#define PTE_MASK (_AT(long, PHYSICAL_PAGE_MASK))
+#define __PHYSICAL_MASK ((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+ virtual addresses are 32-bits but physical addresses are larger
+ (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK (((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
#define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT)
#define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1))
@@ -24,9 +32,6 @@
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-#define __PHYSICAL_MASK _AT(phys_addr_t, (_AC(1,ULL) << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK ((_AC(1,UL) << __VIRTUAL_MASK_SHIFT) - 1)
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
#endif
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index 8b4a9d4..c93dbb6 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -120,9 +120,9 @@
write_cr3(pgd);
}
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_MASK))
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_MASK))
/* Find an entry in the second-level page table.. */
@@ -160,7 +160,7 @@
static inline unsigned long pte_pfn(pte_t pte)
{
- return (pte_val(pte) & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte_val(pte) & PTE_MASK) >> PAGE_SHIFT;
}
/*
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 55c3a0e..97c271b 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -57,6 +57,7 @@
#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
_PAGE_DIRTY)
+/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_PCD | _PAGE_PWT | \
_PAGE_ACCESSED | _PAGE_DIRTY)
@@ -304,7 +305,7 @@
return __pgprot(preservebits | addbits);
}
-#define pte_pgprot(x) __pgprot(pte_val(x) & (0xfff | _PAGE_NX))
+#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK)
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index d7f0403..32ca031 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,7 +88,7 @@
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val((x)))
#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
@@ -159,7 +159,7 @@
#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
#define pmd_page_vaddr(pmd) \
- ((unsigned long)__va(pmd_val((pmd)) & PAGE_MASK))
+ ((unsigned long)__va(pmd_val((pmd)) & PTE_MASK))
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index efe83dc..1cc50d2 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -151,19 +151,19 @@
#ifndef __ASSEMBLY__
-static inline unsigned long pgd_bad(pgd_t pgd)
+static inline int pgd_bad(pgd_t pgd)
{
- return pgd_val(pgd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pgd_val(pgd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pud_bad(pud_t pud)
+static inline int pud_bad(pud_t pud)
{
- return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pud_val(pud) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pmd_bad(pmd_t pmd)
+static inline int pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pmd_val(pmd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
#define pte_none(x) (!pte_val((x)))
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index 0c0674d..35c76ce 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -22,12 +22,23 @@
static inline void __native_flush_tlb_global(void)
{
- unsigned long cr4 = read_cr4();
+ unsigned long flags;
+ unsigned long cr4;
+ /*
+ * Read-modify-write to CR4 - protect it from preemption and
+ * from interrupts. (Use the raw variant because this code can
+ * be called from deep inside debugging code.)
+ */
+ raw_local_irq_save(flags);
+
+ cr4 = read_cr4();
/* clear PGE */
write_cr4(cr4 & ~X86_CR4_PGE);
/* write old PGE again and flush TLBs */
write_cr4(cr4);
+
+ raw_local_irq_restore(flags);
}
static inline void __native_flush_tlb_single(unsigned long addr)
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index 0179930..baf3a4d 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -127,7 +127,7 @@
static inline unsigned long pte_mfn(pte_t pte)
{
- return (pte.pte & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte.pte & PTE_MASK) >> PAGE_SHIFT;
}
static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5dfa739..93b9885 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -92,7 +92,6 @@
header-y += if_strip.h
header-y += if_tun.h
header-y += if_tunnel.h
-header-y += in6.h
header-y += in_route.h
header-y += ioctl.h
header-y += ip6_tunnel.h
@@ -236,6 +235,7 @@
unifdef-y += igmp.h
unifdef-y += inet_diag.h
unifdef-y += in.h
+unifdef-y += in6.h
unifdef-y += inotify.h
unifdef-y += input.h
unifdef-y += ip.h
diff --git a/include/linux/atm.h b/include/linux/atm.h
index 60136684..c791ddd 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -16,14 +16,11 @@
* documentation. Do not change them.
*/
-#ifdef __KERNEL__
-#include <linux/socket.h>
-#include <linux/types.h>
-#endif
#include <linux/compiler.h>
#include <linux/atmapi.h>
#include <linux/atmsap.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/* general ATM constants */
@@ -212,7 +209,7 @@
char pub[ATM_E164_LEN+1]; /* public address (E.164) */
/* unused addresses must be bzero'ed */
char lij_type; /* role in LIJ call; one of ATM_LIJ* */
- uint32_t lij_id; /* LIJ call identifier */
+ __u32 lij_id; /* LIJ call identifier */
} sas_addr __ATM_API_ALIGN; /* SVC address */
};
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 18787f9..375638f 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -8,11 +8,9 @@
#define LINUX_ATM_TCP_H
#include <linux/atmapi.h>
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#endif
+#include <linux/atm.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/*
@@ -20,9 +18,9 @@
*/
struct atmtcp_hdr {
- uint16_t vpi;
- uint16_t vci;
- uint32_t length; /* ... of data part */
+ __u16 vpi;
+ __u16 vci;
+ __u32 length; /* ... of data part */
};
/*
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index cfc3147..e3ef903 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -55,6 +55,7 @@
enum blktrace_notify {
__BLK_TN_PROCESS = 0, /* establish pid/name mapping */
__BLK_TN_TIMESTAMP, /* include system clock */
+ __BLK_TN_MESSAGE, /* Character string message */
};
@@ -79,6 +80,7 @@
#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_IO_TRACE_MAGIC 0x65617400
#define BLK_IO_TRACE_VERSION 0x07
@@ -119,6 +121,7 @@
int trace_state;
struct rchan *rchan;
unsigned long *sequence;
+ unsigned char *msg_data;
u16 act_mask;
u64 start_lba;
u64 end_lba;
@@ -149,7 +152,28 @@
extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *);
extern int do_blk_trace_setup(struct request_queue *q,
char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
+/**
+ * blk_add_trace_msg - Add a (simple) message to the blktrace stream
+ * @q: queue the io is for
+ * @fmt: format to print message in
+ * args... Variable argument list for format
+ *
+ * Description:
+ * Records a (simple) message onto the blktrace stream.
+ *
+ * NOTE: BLK_TN_MAX_MSG characters are output at most.
+ * NOTE: Can not use 'static inline' due to presence of var args...
+ *
+ **/
+#define blk_add_trace_msg(q, fmt, ...) \
+ do { \
+ struct blk_trace *bt = (q)->blk_trace; \
+ if (unlikely(bt)) \
+ __trace_note_message(bt, fmt, ##__VA_ARGS__); \
+ } while (0)
+#define BLK_TN_MAX_MSG 128
/**
* blk_add_trace_rq - Add a trace for a request oriented action
@@ -299,6 +323,8 @@
#define blk_trace_setup(q, name, dev, arg) (-ENOTTY)
#define blk_trace_startstop(q, start) (-ENOTTY)
#define blk_trace_remove(q) (-ENOTTY)
+#define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/device.h b/include/linux/device.h
index 15e9fa3..6a2d04c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -385,6 +385,9 @@
return dev->bus_id;
}
+extern int dev_set_name(struct device *dev, const char *name, ...)
+ __attribute__((format(printf, 2, 3)));
+
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
@@ -449,9 +452,21 @@
/*
* Easy functions for dynamically creating devices on the fly
*/
+extern struct device *device_create_vargs(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt,
+ va_list vargs);
extern struct device *device_create(struct class *cls, struct device *parent,
dev_t devt, const char *fmt, ...)
__attribute__((format(printf, 4, 5)));
+extern struct device *device_create_drvdata(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+ __attribute__((format(printf, 5, 6)));
extern void device_destroy(struct class *cls, dev_t devt);
/*
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 4987a84..98be6c5 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -8,6 +8,9 @@
#else
+#include <linux/types.h>
+#include <linux/errno.h>
+
/*
* Some platforms don't support the GPIO programming interface.
*
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 4ce3b7a..fe56b86 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -2,8 +2,6 @@
#define __HID_H
/*
- * $Id: hid.h,v 1.24 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
@@ -285,6 +283,7 @@
#define HID_QUIRK_HWHEEL_WHEEL_INVERT 0x04000000
#define HID_QUIRK_MICROSOFT_KEYS 0x08000000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
+#define HID_QUIRK_APPLE_NUMLOCK_EMULATION 0x20000000
/*
* Separate quirks for runtime report descriptor fixup
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index acbdae6..a416b90 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -2,8 +2,6 @@
#define _HIDDEV_H
/*
- * $Id: hiddev.h,v 1.2 2001/04/26 11:26:09 vojtech Exp $
- *
* Copyright (c) 1999-2000 Vojtech Pavlik
*
* Sponsored by SuSE
diff --git a/include/linux/input.h b/include/linux/input.h
index 28a094f..e075c4b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -637,7 +637,9 @@
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RADIO 0x03 /* set = radio enabled */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4a92fba..e57e5d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -111,13 +111,10 @@
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
- ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_BUS = 2,
- ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
ATAPI_MAX_DRAIN = 16 << 10,
@@ -1435,7 +1432,8 @@
extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
@@ -1496,19 +1494,6 @@
#endif /* CONFIG_PCI */
/**
- * ata_sff_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
- ata_sff_altstatus(ap);
- ndelay(400);
-}
-
-/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 87920a0..dab8892 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -17,14 +17,14 @@
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_t vm_committed_space;
+extern atomic_long_t vm_committed_space;
#ifdef CONFIG_SMP
extern void vm_acct_memory(long pages);
#else
static inline void vm_acct_memory(long pages)
{
- atomic_add(pages, &vm_committed_space);
+ atomic_long_add(pages, &vm_committed_space);
}
#endif
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index c463cd8..443bc7c 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -703,7 +703,7 @@
extern struct zone *next_zone(struct zone *zone);
/**
- * for_each_pgdat - helper macro to iterate over all nodes
+ * for_each_online_pgdat - helper macro to iterate over all online nodes
* @pgdat - pointer to a pg_data_t variable
*/
#define for_each_online_pgdat(pgdat) \
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index d73ecea..69b2342 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -375,7 +375,8 @@
struct i2c_device_id {
char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
+ kernel_ulong_t driver_data /* Data private to the driver */
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
};
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b11e6e1..f27fd20 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -745,6 +745,9 @@
/* rtnetlink link ops */
const struct rtnl_link_ops *rtnl_link_ops;
+ /* VLAN feature mask */
+ unsigned long vlan_features;
+
/* for setting kernel sock attribute on TCP connection setup */
#define GSO_MAX_SIZE 65536
unsigned int gso_max_size;
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index e4c6659..0c5eb7e 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -3,7 +3,6 @@
#ifdef __KERNEL__
#include <linux/init.h>
-#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/net.h>
#include <linux/netdevice.h>
@@ -14,6 +13,7 @@
#include <linux/list.h>
#include <net/net_namespace.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
/* Responses from hook functions. */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index dd9c97f..590ac3d 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -11,11 +11,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_arp.h>
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index bfc889f..092bd50 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -17,11 +17,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv4.h>
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index f2507dc..1089e33 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -17,11 +17,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv6.h>
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cf6dbd75..9b940e6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1761,6 +1761,7 @@
#define PCI_VENDOR_ID_INTASHIELD 0x135a
#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
@@ -2383,6 +2384,9 @@
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
+#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036
#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff
#define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031
#define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index 47fbcba..78bfdea 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -262,7 +262,6 @@
void bitmap_flush(mddev_t *mddev);
void bitmap_destroy(mddev_t *mddev);
-char *file_path(struct file *file, char *buf, int count);
void bitmap_print_sb(struct bitmap *bitmap);
void bitmap_update_sb(struct bitmap *bitmap);
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index 81a1a02..b7386ae 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -72,6 +72,8 @@
*/
#define MD_PATCHLEVEL_VERSION 3
+extern int mdp_major;
+
extern int register_md_personality (struct mdk_personality *p);
extern int unregister_md_personality (struct mdk_personality *p);
extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev),
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 812ffa5..3dea9f5 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -180,13 +180,15 @@
int sync_speed_min;
int sync_speed_max;
+ /* resync even though the same disks are shared among md-devices */
+ int parallel_resync;
+
int ok_start_degraded;
/* recovery/resync flags
* NEEDED: we might need to start a resync/recover
* RUNNING: a thread is running, or about to be started
* SYNC: actually doing a resync, not a recovery
- * ERR: and IO error was detected - abort the resync/recovery
- * INTR: someone requested a (clean) early abort.
+ * INTR: resync needs to be aborted for some reason
* DONE: thread is done and is waiting to be reaped
* REQUEST: user-space has requested a sync (used with SYNC)
* CHECK: user-space request for for check-only, no repair
@@ -196,7 +198,6 @@
*/
#define MD_RECOVERY_RUNNING 0
#define MD_RECOVERY_SYNC 1
-#define MD_RECOVERY_ERR 2
#define MD_RECOVERY_INTR 3
#define MD_RECOVERY_DONE 4
#define MD_RECOVERY_NEEDED 5
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5395a61..ae0be3c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -766,7 +766,6 @@
struct sched_domain *child; /* bottom domain must be null terminated */
struct sched_group *groups; /* the balancing groups of the domain */
cpumask_t span; /* span of all CPUs in this domain */
- int first_cpu; /* cache of the first cpu in this domain */
unsigned long min_interval; /* Minimum balance interval ms */
unsigned long max_interval; /* Maximum balance interval ms */
unsigned int busy_factor; /* less balancing by factor if busy */
@@ -1848,7 +1847,9 @@
extern void exit_files(struct task_struct *);
extern void __cleanup_signal(struct signal_struct *);
extern void __cleanup_sighand(struct sighand_struct *);
+
extern void exit_itimers(struct signal_struct *);
+extern void flush_itimer_signals(void);
extern NORET_TYPE void do_group_exit(int);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123a..d8f31de 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@
void (*shutdown)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
+ void (*set_ldisc)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index bca1345..95c1c39 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -71,8 +71,8 @@
#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1)
#define SM501FB_FLAG_USE_HWCURSOR (1<<2)
#define SM501FB_FLAG_USE_HWACCEL (1<<3)
-#define SM501FB_FLAG_PANEL_USE_FPEN (1<<4)
-#define SM501FB_FLAG_PANEL_USE_VBIASEN (1<<5)
+#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4)
+#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5)
struct sm501_platdata_fbsub {
struct fb_videomode *def_mode;
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index e9bbe3e..d5ca78b 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_SPI_MMC_SPI_H
#define __LINUX_SPI_MMC_SPI_H
+#include <linux/interrupt.h>
+
struct device;
struct mmc_host;
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index c11bbcc..05eb466 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -71,7 +71,8 @@
* completes.
*/
struct svc_rdma_op_ctxt {
- struct svc_rdma_op_ctxt *next;
+ struct svc_rdma_op_ctxt *read_hdr;
+ struct list_head free_list;
struct xdr_buf arg;
struct list_head dto_q;
enum ib_wr_opcode wr_op;
@@ -85,7 +86,6 @@
struct page *pages[RPCSVC_MAXPAGES];
};
-#define RDMACTXT_F_READ_DONE 1
#define RDMACTXT_F_LAST_CTXT 2
struct svcxprt_rdma {
@@ -104,7 +104,8 @@
struct ib_pd *sc_pd;
- struct svc_rdma_op_ctxt *sc_ctxt_head;
+ atomic_t sc_ctxt_used;
+ struct list_head sc_ctxt_free;
int sc_ctxt_cnt;
int sc_ctxt_bump;
int sc_ctxt_max;
@@ -123,6 +124,7 @@
struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */
struct list_head sc_read_complete_q;
spinlock_t sc_read_complete_lock;
+ struct work_struct sc_work;
};
/* sc_flags */
#define RDMAXPRT_RQ_PENDING 1
@@ -164,8 +166,8 @@
/* svc_rdma_transport.c */
extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *);
-extern int svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
- enum rpcrdma_errcode);
+extern void svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
+ enum rpcrdma_errcode);
struct page *svc_rdma_get_page(void);
extern int svc_rdma_post_recv(struct svcxprt_rdma *);
extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index d96d9b1..18e62e3 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -355,7 +355,7 @@
u32 lost_retrans_low; /* Sent seq after any rxmit (lowest) */
u16 advmss; /* Advertised MSS */
- u16 prior_ssthresh; /* ssthresh saved at recovery start */
+ u32 prior_ssthresh; /* ssthresh saved at recovery start */
u32 lost_out; /* Lost packets */
u32 sacked_out; /* SACK'd packets */
u32 fackets_out; /* FACK'd packets */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 4bb7074..24f3d22 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -166,7 +166,9 @@
.busy_idx = 3, \
.idle_idx = 3, \
.flags = SD_LOAD_BALANCE \
- | SD_SERIALIZE, \
+ | SD_BALANCE_NEWIDLE \
+ | SD_WAKE_AFFINE \
+ | SD_SERIALIZE, \
.last_balance = jiffies, \
.balance_interval = 64, \
}
diff --git a/include/linux/types.h b/include/linux/types.h
index 9dc2346..d4a9ce6 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -197,8 +197,6 @@
typedef u32 resource_size_t;
#endif
-#endif /* __KERNEL__ */
-
struct ustat {
__kernel_daddr_t f_tfree;
__kernel_ino_t f_tinode;
@@ -206,4 +204,6 @@
char f_fpack[6];
};
+#endif /* __KERNEL__ */
+
#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 71e52f2..ca228bb 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -130,6 +130,15 @@
__u8 bNumberPowerFilters;
} __attribute__ ((packed));
+/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
+struct usb_cdc_dmm_desc {
+ __u8 bFunctionLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u16 bcdVersion;
+ __le16 wMaxCommand;
+} __attribute__ ((packed));
+
/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
struct usb_cdc_mdlm_desc {
__u8 bLength;
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3..5f79a5f 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -10,18 +10,19 @@
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
struct virtio_blk_config
{
/* The capacity (in 512-byte sectors). */
- __le64 capacity;
+ __u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
- __le32 size_max;
+ __u32 size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
- __le32 seg_max;
+ __u32 seg_max;
/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
struct virtio_blk_geometry {
- __le16 cylinders;
+ __u16 cylinders;
__u8 heads;
__u8 sectors;
} geometry;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 50db245..f364bbf 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -15,6 +15,10 @@
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
#ifdef __KERNEL__
#include <linux/virtio.h>
@@ -99,7 +103,7 @@
* The return value is -ENOENT if the feature doesn't exist. Otherwise
* the config value is copied into whatever is pointed to by v. */
#define virtio_config_val(vdev, fbit, offset, v) \
- virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+ virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 0000000..331afb6
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG 4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
#define WM9713_COO 0x0001 /* enable coordinate mode */
+#define WM9713_45W 0x1000 /* set for 5 wire panel */
#define WM9713_PDEN 0x0800 /* measure only when pen down */
#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
#define WM9713_WAIT 0x0200 /* coordinate wait */
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 5b39a22..874f134 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -237,6 +237,9 @@
int videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory);
+int __videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory);
int videobuf_mmap_free(struct videobuf_queue *q);
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4a80d74..dae3f9e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1594,13 +1594,16 @@
void ieee80211_scan_completed(struct ieee80211_hw *hw);
/**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
*
* @hw: the hardware struct of which the interfaces should be iterated over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
* @data: first argument of the iterator function
*/
void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -1609,6 +1612,24 @@
void *data);
/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+ void (*iterator)(void *data,
+ u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data);
+
+/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @ra: receiver address of the BA session recipient
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
index 9c451ff..a01b7c4 100644
--- a/include/net/ndisc.h
+++ b/include/net/ndisc.h
@@ -129,6 +129,10 @@
void __user *buffer,
size_t *lenp,
loff_t *ppos);
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen);
#endif
extern void inet6_ifinfo_notify(int event,
diff --git a/include/net/netlink.h b/include/net/netlink.h
index a5506c4..112dcdf 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -772,12 +772,13 @@
const struct nla_policy *policy,
int len)
{
- if (nla_len(nla) < len)
+ int nested_len = nla_len(nla) - NLA_ALIGN(len);
+
+ if (nested_len < 0)
return -1;
- if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr))
- return nla_parse_nested(tb, maxtype,
- nla_data(nla) + NLA_ALIGN(len),
- policy);
+ if (nested_len >= nla_attr_size(0))
+ return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
+ nested_len, policy);
memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
return 0;
}
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 049edc5..9c309da 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -505,6 +505,7 @@
unsigned short pcmreg[3]; // PCM registers
unsigned short codec_cfg[3]; // CODEC_CFG bits
unsigned char swap_mic_linein; // AD1986/AD1986A only
+ unsigned char lo_as_master; /* LO as master */
} ad18xx;
unsigned int dev_flags; /* device specific */
} spec;
diff --git a/init/Kconfig b/init/Kconfig
index 6135d07..6199d11 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -13,6 +13,7 @@
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
+ default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
menu "General setup"
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 7473b0c..693d246 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -24,7 +24,6 @@
static int md_setup_ents __initdata;
-extern int mdp_major;
/*
* Parse the command-line parameters given our kernel, but do not
* actually try to invoke the MD device now; that is handled by
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fbc6fc8..15ac0e1 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2903,7 +2903,7 @@
cg = tsk->cgroups;
parent = task_cgroup(tsk, subsys->subsys_id);
- snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "node_%d", tsk->pid);
+ snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
/* Pin the hierarchy */
atomic_inc(&parent->root->sb->s_active);
diff --git a/kernel/exit.c b/kernel/exit.c
index 1510f78..8f6185e 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -126,6 +126,12 @@
__unhash_process(tsk);
+ /*
+ * Do this under ->siglock, we can race with another thread
+ * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
+ */
+ flush_sigqueue(&tsk->pending);
+
tsk->signal = NULL;
tsk->sighand = NULL;
spin_unlock(&sighand->siglock);
@@ -133,7 +139,6 @@
__cleanup_sighand(sighand);
clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
- flush_sigqueue(&tsk->pending);
if (sig) {
flush_sigqueue(&sig->shared_pending);
taskstats_tgid_free(sig);
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 14787de..79e3c90 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -52,6 +52,7 @@
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <asm/system.h>
+#include <asm/unaligned.h>
static int kgdb_break_asap;
@@ -227,8 +228,6 @@
* GDB remote protocol parser:
*/
-static const char hexchars[] = "0123456789abcdef";
-
static int hex(char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
@@ -316,8 +315,8 @@
}
kgdb_io_ops->write_char('#');
- kgdb_io_ops->write_char(hexchars[checksum >> 4]);
- kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+ kgdb_io_ops->write_char(hex_asc_hi(checksum));
+ kgdb_io_ops->write_char(hex_asc_lo(checksum));
if (kgdb_io_ops->flush)
kgdb_io_ops->flush();
@@ -478,8 +477,8 @@
{
error = -error;
pkt[0] = 'E';
- pkt[1] = hexchars[(error / 10)];
- pkt[2] = hexchars[(error % 10)];
+ pkt[1] = hex_asc[(error / 10)];
+ pkt[2] = hex_asc[(error % 10)];
pkt[3] = '\0';
}
@@ -510,10 +509,7 @@
scan = (unsigned char *)id;
while (i--)
*scan++ = 0;
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
+ put_unaligned_be32(value, scan);
}
static struct task_struct *getthread(struct pt_regs *regs, int tid)
diff --git a/kernel/module.c b/kernel/module.c
index f5e9491..5f80478 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1337,7 +1337,19 @@
kobject_put(&mod->mkobj.kobj);
return err;
}
-#endif
+
+static void mod_sysfs_fini(struct module *mod)
+{
+ kobject_put(&mod->mkobj.kobj);
+}
+
+#else /* CONFIG_SYSFS */
+
+static void mod_sysfs_fini(struct module *mod)
+{
+}
+
+#endif /* CONFIG_SYSFS */
static void mod_kobject_remove(struct module *mod)
{
@@ -1345,7 +1357,7 @@
module_param_sysfs_remove(mod);
kobject_put(mod->mkobj.drivers_dir);
kobject_put(mod->holders_dir);
- kobject_put(&mod->mkobj.kobj);
+ mod_sysfs_fini(mod);
}
/*
@@ -1780,7 +1792,7 @@
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| hdr->e_type != ET_REL
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
diff --git a/kernel/relay.c b/kernel/relay.c
index bc24dcd..7de644c 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1191,7 +1191,7 @@
ret = 0;
spliced = 0;
- while (len) {
+ while (len && !spliced) {
ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret);
if (ret < 0)
break;
diff --git a/kernel/sched.c b/kernel/sched.c
index cfa222a..bfb8ad8 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -136,7 +136,7 @@
static inline int rt_policy(int policy)
{
- if (unlikely(policy == SCHED_FIFO) || unlikely(policy == SCHED_RR))
+ if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
return 1;
return 0;
}
@@ -398,43 +398,6 @@
*/
struct list_head leaf_cfs_rq_list;
struct task_group *tg; /* group that "owns" this runqueue */
-
-#ifdef CONFIG_SMP
- unsigned long task_weight;
- unsigned long shares;
- /*
- * We need space to build a sched_domain wide view of the full task
- * group tree, in order to avoid depending on dynamic memory allocation
- * during the load balancing we place this in the per cpu task group
- * hierarchy. This limits the load balancing to one instance per cpu,
- * but more should not be needed anyway.
- */
- struct aggregate_struct {
- /*
- * load = weight(cpus) * f(tg)
- *
- * Where f(tg) is the recursive weight fraction assigned to
- * this group.
- */
- unsigned long load;
-
- /*
- * part of the group weight distributed to this span.
- */
- unsigned long shares;
-
- /*
- * The sum of all runqueue weights within this span.
- */
- unsigned long rq_weight;
-
- /*
- * Weight contributed by tasks; this is the part we can
- * influence by moving tasks around.
- */
- unsigned long task_weight;
- } aggregate;
-#endif
#endif
};
@@ -1368,9 +1331,6 @@
*/
#define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y))
-/*
- * delta *= weight / lw
- */
static unsigned long
calc_delta_mine(unsigned long delta_exec, unsigned long weight,
struct load_weight *lw)
@@ -1393,6 +1353,12 @@
return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX);
}
+static inline unsigned long
+calc_delta_fair(unsigned long delta_exec, struct load_weight *lw)
+{
+ return calc_delta_mine(delta_exec, NICE_0_LOAD, lw);
+}
+
static inline void update_load_add(struct load_weight *lw, unsigned long inc)
{
lw->weight += inc;
@@ -1505,326 +1471,6 @@
static unsigned long target_load(int cpu, int type);
static unsigned long cpu_avg_load_per_task(int cpu);
static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-
-/*
- * Group load balancing.
- *
- * We calculate a few balance domain wide aggregate numbers; load and weight.
- * Given the pictures below, and assuming each item has equal weight:
- *
- * root 1 - thread
- * / | \ A - group
- * A 1 B
- * /|\ / \
- * C 2 D 3 4
- * | |
- * 5 6
- *
- * load:
- * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd,
- * which equals 1/9-th of the total load.
- *
- * shares:
- * The weight of this group on the selected cpus.
- *
- * rq_weight:
- * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while
- * B would get 2.
- *
- * task_weight:
- * Part of the rq_weight contributed by tasks; all groups except B would
- * get 1, B gets 2.
- */
-
-static inline struct aggregate_struct *
-aggregate(struct task_group *tg, struct sched_domain *sd)
-{
- return &tg->cfs_rq[sd->first_cpu]->aggregate;
-}
-
-typedef void (*aggregate_func)(struct task_group *, struct sched_domain *);
-
-/*
- * Iterate the full tree, calling @down when first entering a node and @up when
- * leaving it for the final time.
- */
-static
-void aggregate_walk_tree(aggregate_func down, aggregate_func up,
- struct sched_domain *sd)
-{
- struct task_group *parent, *child;
-
- rcu_read_lock();
- parent = &root_task_group;
-down:
- (*down)(parent, sd);
- list_for_each_entry_rcu(child, &parent->children, siblings) {
- parent = child;
- goto down;
-
-up:
- continue;
- }
- (*up)(parent, sd);
-
- child = parent;
- parent = parent->parent;
- if (parent)
- goto up;
- rcu_read_unlock();
-}
-
-/*
- * Calculate the aggregate runqueue weight.
- */
-static
-void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long rq_weight = 0;
- unsigned long task_weight = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- rq_weight += tg->cfs_rq[i]->load.weight;
- task_weight += tg->cfs_rq[i]->task_weight;
- }
-
- aggregate(tg, sd)->rq_weight = rq_weight;
- aggregate(tg, sd)->task_weight = task_weight;
-}
-
-/*
- * Compute the weight of this group on the given cpus.
- */
-static
-void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span)
- shares += tg->cfs_rq[i]->shares;
-
- if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares)
- shares = tg->shares;
-
- aggregate(tg, sd)->shares = shares;
-}
-
-/*
- * Compute the load fraction assigned to this group, relies on the aggregate
- * weight and this group's parent's load, i.e. top-down.
- */
-static
-void aggregate_group_load(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long load;
-
- if (!tg->parent) {
- int i;
-
- load = 0;
- for_each_cpu_mask(i, sd->span)
- load += cpu_rq(i)->load.weight;
-
- } else {
- load = aggregate(tg->parent, sd)->load;
-
- /*
- * shares is our weight in the parent's rq so
- * shares/parent->rq_weight gives our fraction of the load
- */
- load *= aggregate(tg, sd)->shares;
- load /= aggregate(tg->parent, sd)->rq_weight + 1;
- }
-
- aggregate(tg, sd)->load = load;
-}
-
-static void __set_se_shares(struct sched_entity *se, unsigned long shares);
-
-/*
- * Calculate and set the cpu's group shares.
- */
-static void
-__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd,
- int tcpu)
-{
- int boost = 0;
- unsigned long shares;
- unsigned long rq_weight;
-
- if (!tg->se[tcpu])
- return;
-
- rq_weight = tg->cfs_rq[tcpu]->load.weight;
-
- /*
- * If there are currently no tasks on the cpu pretend there is one of
- * average load so that when a new task gets to run here it will not
- * get delayed by group starvation.
- */
- if (!rq_weight) {
- boost = 1;
- rq_weight = NICE_0_LOAD;
- }
-
- /*
- * \Sum shares * rq_weight
- * shares = -----------------------
- * \Sum rq_weight
- *
- */
- shares = aggregate(tg, sd)->shares * rq_weight;
- shares /= aggregate(tg, sd)->rq_weight + 1;
-
- /*
- * record the actual number of shares, not the boosted amount.
- */
- tg->cfs_rq[tcpu]->shares = boost ? 0 : shares;
-
- if (shares < MIN_SHARES)
- shares = MIN_SHARES;
- else if (shares > MAX_SHARES)
- shares = MAX_SHARES;
-
- __set_se_shares(tg->se[tcpu], shares);
-}
-
-/*
- * Re-adjust the weights on the cpu the task came from and on the cpu the
- * task went to.
- */
-static void
-__move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- unsigned long shares;
-
- shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
-
- __update_group_shares_cpu(tg, sd, scpu);
- __update_group_shares_cpu(tg, sd, dcpu);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
- if (shares)
- tg->cfs_rq[dcpu]->shares += shares;
-}
-
-/*
- * Because changing a group's shares changes the weight of the super-group
- * we need to walk up the tree and change all shares until we hit the root.
- */
-static void
-move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- while (tg) {
- __move_group_shares(tg, sd, scpu, dcpu);
- tg = tg->parent;
- }
-}
-
-static
-void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = aggregate(tg, sd)->shares;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- struct rq *rq = cpu_rq(i);
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __update_group_shares_cpu(tg, sd, i);
- spin_unlock_irqrestore(&rq->lock, flags);
- }
-
- aggregate_group_shares(tg, sd);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= aggregate(tg, sd)->shares;
- if (shares) {
- tg->cfs_rq[sd->first_cpu]->shares += shares;
- aggregate(tg, sd)->shares += shares;
- }
-}
-
-/*
- * Calculate the accumulative weight and recursive load of each task group
- * while walking down the tree.
- */
-static
-void aggregate_get_down(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_weight(tg, sd);
- aggregate_group_shares(tg, sd);
- aggregate_group_load(tg, sd);
-}
-
-/*
- * Rebalance the cpu shares while walking back up the tree.
- */
-static
-void aggregate_get_up(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_set_shares(tg, sd);
-}
-
-static DEFINE_PER_CPU(spinlock_t, aggregate_lock);
-
-static void __init init_aggregate(void)
-{
- int i;
-
- for_each_possible_cpu(i)
- spin_lock_init(&per_cpu(aggregate_lock, i));
-}
-
-static int get_aggregate(struct sched_domain *sd)
-{
- if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu)))
- return 0;
-
- aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd);
- return 1;
-}
-
-static void put_aggregate(struct sched_domain *sd)
-{
- spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu));
-}
-
-static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
-{
- cfs_rq->shares = shares;
-}
-
-#else
-
-static inline void init_aggregate(void)
-{
-}
-
-static inline int get_aggregate(struct sched_domain *sd)
-{
- return 0;
-}
-
-static inline void put_aggregate(struct sched_domain *sd)
-{
-}
-#endif
-
#else /* CONFIG_SMP */
#ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1845,14 +1491,26 @@
#define sched_class_highest (&rt_sched_class)
-static void inc_nr_running(struct rq *rq)
+static inline void inc_load(struct rq *rq, const struct task_struct *p)
{
- rq->nr_running++;
+ update_load_add(&rq->load, p->se.load.weight);
}
-static void dec_nr_running(struct rq *rq)
+static inline void dec_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_sub(&rq->load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq)
+{
+ rq->nr_running++;
+ inc_load(rq, p);
+}
+
+static void dec_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running--;
+ dec_load(rq, p);
}
static void set_load_weight(struct task_struct *p)
@@ -1944,7 +1602,7 @@
rq->nr_uninterruptible--;
enqueue_task(rq, p, wakeup);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
/*
@@ -1956,7 +1614,7 @@
rq->nr_uninterruptible++;
dequeue_task(rq, p, sleep);
- dec_nr_running(rq);
+ dec_nr_running(p, rq);
}
/**
@@ -2609,7 +2267,7 @@
* management (if any):
*/
p->sched_class->task_new(rq, p);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
check_preempt_curr(rq, p);
#ifdef CONFIG_SMP
@@ -3600,12 +3258,9 @@
unsigned long imbalance;
struct rq *busiest;
unsigned long flags;
- int unlock_aggregate;
cpus_setall(*cpus);
- unlock_aggregate = get_aggregate(sd);
-
/*
* When power savings policy is enabled for the parent domain, idle
* sibling can pick up load irrespective of busy siblings. In this case,
@@ -3721,9 +3376,8 @@
if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
-
- goto out;
+ return -1;
+ return ld_moved;
out_balanced:
schedstat_inc(sd, lb_balanced[idle]);
@@ -3738,13 +3392,8 @@
if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
- else
- ld_moved = 0;
-out:
- if (unlock_aggregate)
- put_aggregate(sd);
- return ld_moved;
+ return -1;
+ return 0;
}
/*
@@ -4430,7 +4079,7 @@
* schedule() atomically, we ignore that path for now.
* Otherwise, whine if we are scheduling when we should not be.
*/
- if (unlikely(in_atomic_preempt_off()) && unlikely(!prev->exit_state))
+ if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
__schedule_bug(prev);
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
@@ -4931,8 +4580,10 @@
goto out_unlock;
}
on_rq = p->se.on_rq;
- if (on_rq)
+ if (on_rq) {
dequeue_task(rq, p, 0);
+ dec_load(rq, p);
+ }
p->static_prio = NICE_TO_PRIO(nice);
set_load_weight(p);
@@ -4942,6 +4593,7 @@
if (on_rq) {
enqueue_task(rq, p, 0);
+ inc_load(rq, p);
/*
* If the task increased its priority or is running and
* lowered its priority, then reschedule its CPU:
@@ -7316,7 +6968,6 @@
SD_INIT(sd, ALLNODES);
set_domain_attribute(sd, attr);
sd->span = *cpu_map;
- sd->first_cpu = first_cpu(sd->span);
cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
p = sd;
sd_allnodes = 1;
@@ -7327,7 +6978,6 @@
SD_INIT(sd, NODE);
set_domain_attribute(sd, attr);
sched_domain_node_span(cpu_to_node(i), &sd->span);
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
@@ -7339,7 +6989,6 @@
SD_INIT(sd, CPU);
set_domain_attribute(sd, attr);
sd->span = *nodemask;
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
@@ -7351,7 +7000,6 @@
SD_INIT(sd, MC);
set_domain_attribute(sd, attr);
sd->span = cpu_coregroup_map(i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
@@ -7364,7 +7012,6 @@
SD_INIT(sd, SIBLING);
set_domain_attribute(sd, attr);
sd->span = per_cpu(cpu_sibling_map, i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
@@ -7568,8 +7215,8 @@
static cpumask_t *doms_cur; /* current sched domains */
static int ndoms_cur; /* number of sched domains in 'doms_cur' */
-static struct sched_domain_attr *dattr_cur; /* attribues of custom domains
- in 'doms_cur' */
+static struct sched_domain_attr *dattr_cur;
+ /* attribues of custom domains in 'doms_cur' */
/*
* Special case: If a kmalloc of a doms_cur partition (array of
@@ -8034,7 +7681,6 @@
}
#ifdef CONFIG_SMP
- init_aggregate();
init_defrootdomain();
#endif
@@ -8599,11 +8245,14 @@
#endif
#ifdef CONFIG_FAIR_GROUP_SCHED
-static void __set_se_shares(struct sched_entity *se, unsigned long shares)
+static void set_se_shares(struct sched_entity *se, unsigned long shares)
{
struct cfs_rq *cfs_rq = se->cfs_rq;
+ struct rq *rq = cfs_rq->rq;
int on_rq;
+ spin_lock_irq(&rq->lock);
+
on_rq = se->on_rq;
if (on_rq)
dequeue_entity(cfs_rq, se, 0);
@@ -8613,17 +8262,8 @@
if (on_rq)
enqueue_entity(cfs_rq, se, 0);
-}
-static void set_se_shares(struct sched_entity *se, unsigned long shares)
-{
- struct cfs_rq *cfs_rq = se->cfs_rq;
- struct rq *rq = cfs_rq->rq;
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __set_se_shares(se, shares);
- spin_unlock_irqrestore(&rq->lock, flags);
+ spin_unlock_irq(&rq->lock);
}
static DEFINE_MUTEX(shares_mutex);
@@ -8662,13 +8302,8 @@
* w/o tripping rebalance_share or load_balance_fair.
*/
tg->shares = shares;
- for_each_possible_cpu(i) {
- /*
- * force a rebalance
- */
- cfs_rq_set_shares(tg->cfs_rq[i], 0);
+ for_each_possible_cpu(i)
set_se_shares(tg->se[i], shares);
- }
/*
* Enable load balance activity on this group, by inserting it back on
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 9c597e3..ce05271 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -59,22 +59,26 @@
return &per_cpu(sched_clock_data, cpu);
}
+static __read_mostly int sched_clock_running;
+
void sched_clock_init(void)
{
u64 ktime_now = ktime_to_ns(ktime_get());
- u64 now = 0;
+ unsigned long now_jiffies = jiffies;
int cpu;
for_each_possible_cpu(cpu) {
struct sched_clock_data *scd = cpu_sdc(cpu);
scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
- scd->prev_jiffies = jiffies;
- scd->prev_raw = now;
- scd->tick_raw = now;
+ scd->prev_jiffies = now_jiffies;
+ scd->prev_raw = 0;
+ scd->tick_raw = 0;
scd->tick_gtod = ktime_now;
scd->clock = ktime_now;
}
+
+ sched_clock_running = 1;
}
/*
@@ -136,6 +140,9 @@
struct sched_clock_data *scd = cpu_sdc(cpu);
u64 now, clock;
+ if (unlikely(!sched_clock_running))
+ return 0ull;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
@@ -174,6 +181,9 @@
struct sched_clock_data *scd = this_scd();
u64 now, now_gtod;
+ if (unlikely(!sched_clock_running))
+ return;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 5f06118..8bb7130 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -167,11 +167,6 @@
#endif
SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over",
cfs_rq->nr_spread_over);
-#ifdef CONFIG_FAIR_GROUP_SCHED
-#ifdef CONFIG_SMP
- SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares);
-#endif
-#endif
}
static void print_cpu(struct seq_file *m, int cpu)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index e24ecd3..08ae848 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -334,34 +334,6 @@
#endif
/*
- * delta *= w / rw
- */
-static inline unsigned long
-calc_delta_weight(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- se->load.weight, &cfs_rq_of(se)->load);
- }
-
- return delta;
-}
-
-/*
- * delta *= rw / w
- */
-static inline unsigned long
-calc_delta_fair(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, &se->load);
- }
-
- return delta;
-}
-
-/*
* The idea is to set a period in which each task runs once.
*
* When there are too many tasks (sysctl_sched_nr_latency) we have to stretch
@@ -390,54 +362,47 @@
*/
static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
- return calc_delta_weight(__sched_period(cfs_rq->nr_running), se);
+ u64 slice = __sched_period(cfs_rq->nr_running);
+
+ for_each_sched_entity(se) {
+ cfs_rq = cfs_rq_of(se);
+
+ slice *= se->load.weight;
+ do_div(slice, cfs_rq->load.weight);
+ }
+
+
+ return slice;
}
/*
* We calculate the vruntime slice of a to be inserted task
*
- * vs = s*rw/w = p
+ * vs = s/w = p/rw
*/
static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
unsigned long nr_running = cfs_rq->nr_running;
+ unsigned long weight;
+ u64 vslice;
if (!se->on_rq)
nr_running++;
- return __sched_period(nr_running);
-}
-
-/*
- * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in
- * that it favours >=0 over <0.
- *
- * -20 |
- * |
- * 0 --------+-------
- * .'
- * 19 .'
- *
- */
-static unsigned long
-calc_delta_asym(unsigned long delta, struct sched_entity *se)
-{
- struct load_weight lw = {
- .weight = NICE_0_LOAD,
- .inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT)
- };
+ vslice = __sched_period(nr_running);
for_each_sched_entity(se) {
- struct load_weight *se_lw = &se->load;
+ cfs_rq = cfs_rq_of(se);
- if (se->load.weight < NICE_0_LOAD)
- se_lw = &lw;
+ weight = cfs_rq->load.weight;
+ if (!se->on_rq)
+ weight += se->load.weight;
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, se_lw);
+ vslice *= NICE_0_LOAD;
+ do_div(vslice, weight);
}
- return delta;
+ return vslice;
}
/*
@@ -454,7 +419,11 @@
curr->sum_exec_runtime += delta_exec;
schedstat_add(cfs_rq, exec_clock, delta_exec);
- delta_exec_weighted = calc_delta_fair(delta_exec, curr);
+ delta_exec_weighted = delta_exec;
+ if (unlikely(curr->load.weight != NICE_0_LOAD)) {
+ delta_exec_weighted = calc_delta_fair(delta_exec_weighted,
+ &curr->load);
+ }
curr->vruntime += delta_exec_weighted;
}
@@ -541,27 +510,10 @@
* Scheduling class queueing methods:
*/
-#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
-static void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
- cfs_rq->task_weight += weight;
-}
-#else
-static inline void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
-}
-#endif
-
static void
account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_add(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- inc_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, se->load.weight);
cfs_rq->nr_running++;
se->on_rq = 1;
list_add(&se->group_node, &cfs_rq->tasks);
@@ -571,10 +523,6 @@
account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_sub(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- dec_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, -se->load.weight);
cfs_rq->nr_running--;
se->on_rq = 0;
list_del_init(&se->group_node);
@@ -661,17 +609,8 @@
if (!initial) {
/* sleeps upto a single latency don't count. */
- if (sched_feat(NEW_FAIR_SLEEPERS)) {
- unsigned long thresh = sysctl_sched_latency;
-
- /*
- * convert the sleeper threshold into virtual time
- */
- if (sched_feat(NORMALIZED_SLEEPER))
- thresh = calc_delta_fair(thresh, se);
-
- vruntime -= thresh;
- }
+ if (sched_feat(NEW_FAIR_SLEEPERS))
+ vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
@@ -1057,25 +996,12 @@
struct task_struct *curr = this_rq->curr;
unsigned long tl = this_load;
unsigned long tl_per_task;
+ int balanced;
- if (!(this_sd->flags & SD_WAKE_AFFINE))
+ if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
return 0;
/*
- * If the currently running task will sleep within
- * a reasonable amount of time then attract this newly
- * woken task:
- */
- if (sync && curr->sched_class == &fair_sched_class) {
- if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
- p->se.avg_overlap < sysctl_sched_migration_cost)
- return 1;
- }
-
- schedstat_inc(p, se.nr_wakeups_affine_attempts);
- tl_per_task = cpu_avg_load_per_task(this_cpu);
-
- /*
* If sync wakeup then subtract the (maximum possible)
* effect of the currently running task from the load
* of the current CPU:
@@ -1083,8 +1009,24 @@
if (sync)
tl -= current->se.load.weight;
+ balanced = 100*(tl + p->se.load.weight) <= imbalance*load;
+
+ /*
+ * If the currently running task will sleep within
+ * a reasonable amount of time then attract this newly
+ * woken task:
+ */
+ if (sync && balanced && curr->sched_class == &fair_sched_class) {
+ if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
+ p->se.avg_overlap < sysctl_sched_migration_cost)
+ return 1;
+ }
+
+ schedstat_inc(p, se.nr_wakeups_affine_attempts);
+ tl_per_task = cpu_avg_load_per_task(this_cpu);
+
if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) ||
- 100*(tl + p->se.load.weight) <= imbalance*load) {
+ balanced) {
/*
* This domain has SD_WAKE_AFFINE and
* p is cache cold in this domain, and
@@ -1169,10 +1111,11 @@
unsigned long gran = sysctl_sched_wakeup_granularity;
/*
- * More easily preempt - nice tasks, while not making it harder for
- * + nice tasks.
+ * More easily preempt - nice tasks, while not making
+ * it harder for + nice tasks.
*/
- gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se);
+ if (unlikely(se->load.weight > NICE_0_LOAD))
+ gran = calc_delta_fair(gran, &se->load);
return gran;
}
@@ -1366,90 +1309,75 @@
return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator);
}
-static unsigned long
-__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move, struct sched_domain *sd,
- enum cpu_idle_type idle, int *all_pinned, int *this_best_prio,
- struct cfs_rq *cfs_rq)
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static int cfs_rq_best_prio(struct cfs_rq *cfs_rq)
{
+ struct sched_entity *curr;
+ struct task_struct *p;
+
+ if (!cfs_rq->nr_running || !first_fair(cfs_rq))
+ return MAX_PRIO;
+
+ curr = cfs_rq->curr;
+ if (!curr)
+ curr = __pick_next_entity(cfs_rq);
+
+ p = task_of(curr);
+
+ return p->prio;
+}
+#endif
+
+static unsigned long
+load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned, int *this_best_prio)
+{
+ struct cfs_rq *busy_cfs_rq;
+ long rem_load_move = max_load_move;
struct rq_iterator cfs_rq_iterator;
cfs_rq_iterator.start = load_balance_start_fair;
cfs_rq_iterator.next = load_balance_next_fair;
- cfs_rq_iterator.arg = cfs_rq;
- return balance_tasks(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &cfs_rq_iterator);
-}
-
+ for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
#ifdef CONFIG_FAIR_GROUP_SCHED
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
-{
- long rem_load_move = max_load_move;
- int busiest_cpu = cpu_of(busiest);
- struct task_group *tg;
-
- rcu_read_lock();
- list_for_each_entry(tg, &task_groups, list) {
+ struct cfs_rq *this_cfs_rq;
long imbalance;
- unsigned long this_weight, busiest_weight;
- long rem_load, max_load, moved_load;
+ unsigned long maxload;
+ this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu);
+
+ imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight;
+ /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */
+ if (imbalance <= 0)
+ continue;
+
+ /* Don't pull more than imbalance/2 */
+ imbalance /= 2;
+ maxload = min(rem_load_move, imbalance);
+
+ *this_best_prio = cfs_rq_best_prio(this_cfs_rq);
+#else
+# define maxload rem_load_move
+#endif
/*
- * empty group
+ * pass busy_cfs_rq argument into
+ * load_balance_[start|next]_fair iterators
*/
- if (!aggregate(tg, sd)->task_weight)
- continue;
+ cfs_rq_iterator.arg = busy_cfs_rq;
+ rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
+ maxload, sd, idle, all_pinned,
+ this_best_prio,
+ &cfs_rq_iterator);
- rem_load = rem_load_move * aggregate(tg, sd)->rq_weight;
- rem_load /= aggregate(tg, sd)->load + 1;
-
- this_weight = tg->cfs_rq[this_cpu]->task_weight;
- busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight;
-
- imbalance = (busiest_weight - this_weight) / 2;
-
- if (imbalance < 0)
- imbalance = busiest_weight;
-
- max_load = max(rem_load, imbalance);
- moved_load = __load_balance_fair(this_rq, this_cpu, busiest,
- max_load, sd, idle, all_pinned, this_best_prio,
- tg->cfs_rq[busiest_cpu]);
-
- if (!moved_load)
- continue;
-
- move_group_shares(tg, sd, busiest_cpu, this_cpu);
-
- moved_load *= aggregate(tg, sd)->load;
- moved_load /= aggregate(tg, sd)->rq_weight + 1;
-
- rem_load_move -= moved_load;
- if (rem_load_move < 0)
+ if (rem_load_move <= 0)
break;
}
- rcu_read_unlock();
return max_load_move - rem_load_move;
}
-#else
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
-{
- return __load_balance_fair(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &busiest->cfs);
-}
-#endif
static int
move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 060e87b..3432d57 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -513,8 +513,6 @@
*/
for_each_sched_rt_entity(rt_se)
enqueue_rt_entity(rt_se);
-
- inc_cpu_load(rq, p->se.load.weight);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
@@ -534,8 +532,6 @@
if (rt_rq && rt_rq->rt_nr_running)
enqueue_rt_entity(rt_se);
}
-
- dec_cpu_load(rq, p->se.load.weight);
}
/*
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index 5bae2e0..a38878e 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -67,6 +67,7 @@
preempt_enable();
#endif
}
+ kfree(mask_str);
return 0;
}
diff --git a/kernel/signal.c b/kernel/signal.c
index 72bb4f5..6c0958e 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -231,6 +231,40 @@
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
+static void __flush_itimer_signals(struct sigpending *pending)
+{
+ sigset_t signal, retain;
+ struct sigqueue *q, *n;
+
+ signal = pending->signal;
+ sigemptyset(&retain);
+
+ list_for_each_entry_safe(q, n, &pending->list, list) {
+ int sig = q->info.si_signo;
+
+ if (likely(q->info.si_code != SI_TIMER)) {
+ sigaddset(&retain, sig);
+ } else {
+ sigdelset(&signal, sig);
+ list_del_init(&q->list);
+ __sigqueue_free(q);
+ }
+ }
+
+ sigorsets(&pending->signal, &signal, &retain);
+}
+
+void flush_itimer_signals(void)
+{
+ struct task_struct *tsk = current;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tsk->sighand->siglock, flags);
+ __flush_itimer_signals(&tsk->pending);
+ __flush_itimer_signals(&tsk->signal->shared_pending);
+ spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+}
+
void ignore_signals(struct task_struct *t)
{
int i;
@@ -1240,17 +1274,22 @@
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
/*
- * If the signal is still pending remove it from the
- * pending queue. We must hold ->siglock while testing
- * q->list to serialize with collect_signal().
+ * We must hold ->siglock while testing q->list
+ * to serialize with collect_signal() or with
+ * __exit_signal()->flush_sigqueue().
*/
spin_lock_irqsave(lock, flags);
+ q->flags &= ~SIGQUEUE_PREALLOC;
+ /*
+ * If it is queued it will be freed when dequeued,
+ * like the "regular" sigqueue.
+ */
if (!list_empty(&q->list))
- list_del_init(&q->list);
+ q = NULL;
spin_unlock_irqrestore(lock, flags);
- q->flags &= ~SIGQUEUE_PREALLOC;
- __sigqueue_free(q);
+ if (q)
+ __sigqueue_free(q);
}
int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 0101aee..b7350bb 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -62,8 +62,7 @@
* help our sisters onto their CPUs. */
if (!prepared && !irqs_disabled)
yield();
- else
- cpu_relax();
+ cpu_relax();
}
/* Ack: we are exiting. */
@@ -106,8 +105,10 @@
}
/* Wait for them all to come to life. */
- while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
+ while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
yield();
+ cpu_relax();
+ }
/* If some failed, kill them all. */
if (ret < 0) {
diff --git a/kernel/sys.c b/kernel/sys.c
index 895d2d4..14e9728 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1652,7 +1652,7 @@
asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
- long uninitialized_var(error);
+ long error = 0;
if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
return error;
@@ -1701,9 +1701,7 @@
error = PR_TIMING_STATISTICAL;
break;
case PR_SET_TIMING:
- if (arg2 == PR_TIMING_STATISTICAL)
- error = 0;
- else
+ if (arg2 != PR_TIMING_STATISTICAL)
error = -EINVAL;
break;
diff --git a/lib/lmb.c b/lib/lmb.c
index 867f7b5..5d7b928 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -48,7 +48,8 @@
}
pr_info(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- pr_info(" reserved.size = 0x%lx\n", lmb.reserved.size);
+ pr_info(" reserved.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
pr_info(" reserved.region[0x%lx].base = 0x%llx\n",
i, (unsigned long long)lmb.reserved.region[i].base);
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 7c4f9e0..f2e574d 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -172,30 +172,22 @@
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
- char *name;
va_list args;
int ret = 0;
struct device *dev;
va_start(args, fmt);
- name = kvasprintf(GFP_KERNEL, fmt, args);
+ dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
-
- if (!name)
- return -ENOMEM;
-
- dev = device_create(bdi_class, parent, MKDEV(0, 0), name);
if (IS_ERR(dev)) {
ret = PTR_ERR(dev);
goto exit;
}
bdi->dev = dev;
- dev_set_drvdata(bdi->dev, bdi);
- bdi_debug_register(bdi, name);
+ bdi_debug_register(bdi, dev_name(dev));
exit:
- kfree(name);
return ret;
}
EXPORT_SYMBOL(bdi_register);
diff --git a/mm/memory.c b/mm/memory.c
index fb5608a..19e0ae9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2295,8 +2295,6 @@
vmf.flags = flags;
vmf.page = NULL;
- BUG_ON(vma->vm_flags & VM_PFNMAP);
-
ret = vma->vm_ops->fault(vma, &vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
diff --git a/mm/mmap.c b/mm/mmap.c
index fac6633..669499e 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -80,7 +80,7 @@
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
/*
* Check that a process has enough memory to allocate a new virtual
@@ -177,7 +177,7 @@
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
diff --git a/mm/nommu.c b/mm/nommu.c
index ef8c62c..dca93fc 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -39,7 +39,7 @@
unsigned long max_mapnr;
unsigned long num_physpages;
unsigned long askedalloc, realalloc;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
@@ -1410,7 +1410,7 @@
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6383557..8e83f02 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1396,6 +1396,9 @@
(void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
&preferred_zone);
+ if (!preferred_zone)
+ return NULL;
+
classzone_idx = zone_idx(preferred_zone);
zonelist_scan:
@@ -2804,7 +2807,7 @@
alloc_size = zone->wait_table_hash_nr_entries
* sizeof(wait_queue_head_t);
- if (system_state == SYSTEM_BOOTING) {
+ if (!slab_is_available()) {
zone->wait_table = (wait_queue_head_t *)
alloc_bootmem_node(pgdat, alloc_size);
} else {
@@ -3378,7 +3381,8 @@
* is used by this zone for memmap. This affects the watermark
* and per-cpu initialisations
*/
- memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT;
+ memmap_pages =
+ PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT;
if (realsize >= memmap_pages) {
realsize -= memmap_pages;
printk(KERN_DEBUG
diff --git a/mm/slob.c b/mm/slob.c
index 6038cba..a3ad667 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -469,8 +469,9 @@
return ZERO_SIZE_PTR;
m = slob_alloc(size + align, gfp, align, node);
- if (m)
- *m = size;
+ if (!m)
+ return NULL;
+ *m = size;
return (void *)m + align;
} else {
void *ret;
diff --git a/mm/slub.c b/mm/slub.c
index a505a82..0987d1c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2726,9 +2726,10 @@
page = virt_to_head_page(object);
- if (unlikely(!PageSlab(page)))
+ if (unlikely(!PageSlab(page))) {
+ WARN_ON(!PageCompound(page));
return PAGE_SIZE << compound_order(page);
-
+ }
s = page->slab;
#ifdef CONFIG_SLUB_DEBUG
diff --git a/mm/swap.c b/mm/swap.c
index 91e1944..45c9f25 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -503,7 +503,7 @@
local = &__get_cpu_var(committed_space);
*local += pages;
if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_add(*local, &vm_committed_space);
+ atomic_long_add(*local, &vm_committed_space);
*local = 0;
}
preempt_enable();
@@ -520,7 +520,7 @@
committed = &per_cpu(committed_space, (long)hcpu);
if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_add(*committed, &vm_committed_space);
+ atomic_long_add(*committed, &vm_committed_space);
*committed = 0;
drain_cpu_pagevecs((long)hcpu);
}
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 2a739ad..ab2225d 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -382,6 +382,18 @@
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void vlan_transfer_features(struct net_device *dev,
+ struct net_device *vlandev)
+{
+ unsigned long old_features = vlandev->features;
+
+ vlandev->features &= ~dev->vlan_features;
+ vlandev->features |= dev->features & dev->vlan_features;
+
+ if (old_features != vlandev->features)
+ netdev_features_change(vlandev);
+}
+
static void __vlan_device_event(struct net_device *dev, unsigned long event)
{
switch (event) {
@@ -410,10 +422,8 @@
int i, flgs;
struct net_device *vlandev;
- if (is_vlan_dev(dev)) {
+ if (is_vlan_dev(dev))
__vlan_device_event(dev, event);
- goto out;
- }
grp = __vlan_find_group(dev);
if (!grp)
@@ -450,6 +460,18 @@
}
break;
+ case NETDEV_FEAT_CHANGE:
+ /* Propagate device features to underlying device */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ vlan_transfer_features(dev, vlandev);
+ }
+
+ break;
+
case NETDEV_DOWN:
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index c961f08..5d055c2 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -663,6 +663,8 @@
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
+ dev->features |= real_dev->features & real_dev->vlan_features;
+
/* ipv6 shared card related stuff */
dev->dev_id = real_dev->dev_id;
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index eb62558..0c2c937 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- rfcomm_dlc_unlock(d);
d->state_change(d, err);
+ rfcomm_dlc_unlock(d);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
diff --git a/net/core/dev.c b/net/core/dev.c
index a1607bc..5829630 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -903,7 +903,11 @@
strlcpy(dev->name, newname, IFNAMSIZ);
rollback:
- device_rename(&dev->dev, dev->name);
+ err = device_rename(&dev->dev, dev->name);
+ if (err) {
+ memcpy(dev->name, oldname, IFNAMSIZ);
+ return err;
+ }
write_lock_bh(&dev_base_lock);
hlist_del(&dev->name_hlist);
@@ -3137,7 +3141,7 @@
* Load in the correct multicast list now the flags have changed.
*/
- if (dev->change_rx_flags && (dev->flags ^ flags) & IFF_MULTICAST)
+ if (dev->change_rx_flags && (old_flags ^ flags) & IFF_MULTICAST)
dev->change_rx_flags(dev, IFF_MULTICAST);
dev_set_rx_mode(dev);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 8dca211..fdf5377 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -390,6 +390,7 @@
int cpu;
wait_queue_head_t queue;
+ struct completion start_done;
};
#define REMOVE 1
@@ -3414,6 +3415,7 @@
BUG_ON(smp_processor_id() != cpu);
init_waitqueue_head(&t->queue);
+ complete(&t->start_done);
pr_debug("pktgen: starting pktgen/%d: pid=%d\n", cpu, task_pid_nr(current));
@@ -3615,6 +3617,7 @@
INIT_LIST_HEAD(&t->if_list);
list_add_tail(&t->th_list, &pktgen_threads);
+ init_completion(&t->start_done);
p = kthread_create(pktgen_thread_worker, t, "kpktgend_%d", cpu);
if (IS_ERR(p)) {
@@ -3639,6 +3642,7 @@
}
wake_up_process(p);
+ wait_for_completion(&t->start_done);
return 0;
}
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index cd61dea..f813077 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -193,22 +193,17 @@
/*
* Update Window Counter using the algorithm from [RFC 4342, 8.1].
- * The algorithm is not applicable if RTT < 4 microseconds.
+ * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
*/
static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
ktime_t now)
{
- u32 quarter_rtts;
-
- if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */
- return;
-
- quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
- quarter_rtts /= hctx->ccid3hctx_rtt / 4;
+ u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
+ quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
if (quarter_rtts > 0) {
hctx->ccid3hctx_t_last_win_count = now;
- hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5);
+ hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U);
hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */
}
}
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index b348dd7..c22a378 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -739,8 +739,8 @@
* If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
* has short sequence numbers), drop packet and return
*/
- if (dh->dccph_type >= DCCP_PKT_DATA &&
- dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0) {
+ if ((dh->dccph_type < DCCP_PKT_DATA ||
+ dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) {
DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n",
dccp_packet_name(dh->dccph_type));
return 1;
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 418862f..9b539fa 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1288,7 +1288,6 @@
struct neighbour *n)
{
char hbuffer[HBUFFERLEN];
- const char hexbuf[] = "0123456789ABCDEF";
int k, j;
char tbuf[16];
struct net_device *dev = n->dev;
@@ -1302,8 +1301,8 @@
else {
#endif
for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
- hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
- hbuffer[k++] = hexbuf[n->ha[j] & 15];
+ hbuffer[k++] = hex_asc_hi(n->ha[j]);
+ hbuffer[k++] = hex_asc_lo(n->ha[j]);
hbuffer[k++] = ':';
}
hbuffer[--k] = 0;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 2ada033..4342cba 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -313,9 +313,8 @@
static void ipgre_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
@@ -398,149 +397,6 @@
out:
read_unlock(&ipgre_lock);
return;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- struct iphdr *eiph;
- __be16 *p = (__be16*)(dp+(iph->ihl<<2));
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- __be16 flags;
- int grehlen = (iph->ihl<<2) + 4;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (p[1] != htons(ETH_P_IP))
- return;
-
- flags = p[0];
- if (flags&(GRE_CSUM|GRE_KEY|GRE_SEQ|GRE_ROUTING|GRE_VERSION)) {
- if (flags&(GRE_VERSION|GRE_ROUTING))
- return;
- if (flags&GRE_CSUM)
- grehlen += 4;
- if (flags&GRE_KEY)
- grehlen += 4;
- if (flags&GRE_SEQ)
- grehlen += 4;
- }
- if (len < grehlen + sizeof(struct iphdr))
- return;
- eiph = (struct iphdr*)(dp + grehlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < (iph->ihl<<2))
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- n -= grehlen;
- rel_info = htonl(n << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < grehlen+68)
- return;
- n -= grehlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_dst = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_GRE;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_dst = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_IPGRE) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_IPGRE) {
- kfree_skb(skb2);
- return;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
-#endif
}
static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 149111f..af5cb53 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -278,9 +278,8 @@
static int ipip_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
@@ -337,133 +336,6 @@
out:
read_unlock(&ipip_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct iphdr *eiph;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (len < hlen + sizeof(struct iphdr))
- return 0;
- eiph = (struct iphdr*)(dp + hlen);
-
- switch (type) {
- default:
- return 0;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < hlen)
- return 0;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- rel_info = htonl((n - hlen) << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return 0;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < hlen+68)
- return 0;
- n -= hlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return 0;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return 0;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_daddr = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_IPIP;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &key)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_daddr = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_TUNNEL) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return 0;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_TUNNEL) {
- kfree_skb(skb2);
- return 0;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip_ecn_decapsulate(const struct iphdr *outer_iph,
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 92f90ae..df41026 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -160,7 +160,7 @@
.negative_advice = ipv4_negative_advice,
.link_failure = ipv4_link_failure,
.update_pmtu = ip_rt_update_pmtu,
- .local_out = ip_local_out,
+ .local_out = __ip_local_out,
.entry_size = sizeof(struct rtable),
.entries = ATOMIC_INIT(0),
};
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index debf235..e399bde 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1836,7 +1836,7 @@
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
- unsigned int cur_mss = tcp_current_mss(sk, 0);
+ unsigned int cur_mss;
int err;
/* Inconslusive MTU probe */
@@ -1858,6 +1858,11 @@
return -ENOMEM;
}
+ if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
+ return -EHOSTUNREACH; /* Routing failure or similar. */
+
+ cur_mss = tcp_current_mss(sk, 0);
+
/* If receiver has shrunk his window, and skb is out of
* new window, do not retransmit it. The exception is the
* case, when window is shrunk to zero. In this case
@@ -1884,9 +1889,6 @@
(sysctl_tcp_retrans_collapse != 0))
tcp_retrans_try_collapse(sk, skb, cur_mss);
- if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
- return -EHOSTUNREACH; /* Routing failure or similar. */
-
/* Some Solaris stacks overoptimize and ignore the FIN on a
* retransmit when old data is attached. So strip it off
* since it is cheap to do so and saves bytes on the network.
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e591e09..3a83557 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1764,14 +1764,16 @@
* 2) Configure prefixes with the auto flag set
*/
- /* Avoid arithmetic overflow. Really, we could
- save rt_expires in seconds, likely valid_lft,
- but it would require division in fib gc, that it
- not good.
- */
- if (valid_lft >= 0x7FFFFFFF/HZ)
+ if (valid_lft == INFINITY_LIFE_TIME)
+ rt_expires = ~0UL;
+ else if (valid_lft >= 0x7FFFFFFF/HZ) {
+ /* Avoid arithmetic overflow. Really, we could
+ * save rt_expires in seconds, likely valid_lft,
+ * but it would require division in fib gc, that it
+ * not good.
+ */
rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
- else
+ } else
rt_expires = valid_lft * HZ;
/*
@@ -1779,7 +1781,7 @@
* Avoid arithmetic overflow there as well.
* Overflow can happen only if HZ < USER_HZ.
*/
- if (HZ < USER_HZ && rt_expires > 0x7FFFFFFF / USER_HZ)
+ if (HZ < USER_HZ && ~rt_expires && rt_expires > 0x7FFFFFFF / USER_HZ)
rt_expires = 0x7FFFFFFF / USER_HZ;
if (pinfo->onlink) {
@@ -1788,17 +1790,28 @@
dev->ifindex, 1);
if (rt && ((rt->rt6i_flags & (RTF_GATEWAY | RTF_DEFAULT)) == 0)) {
- if (rt->rt6i_flags&RTF_EXPIRES) {
- if (valid_lft == 0) {
- ip6_del_rt(rt);
- rt = NULL;
- } else {
- rt->rt6i_expires = jiffies + rt_expires;
- }
+ /* Autoconf prefix route */
+ if (valid_lft == 0) {
+ ip6_del_rt(rt);
+ rt = NULL;
+ } else if (~rt_expires) {
+ /* not infinity */
+ rt->rt6i_expires = jiffies + rt_expires;
+ rt->rt6i_flags |= RTF_EXPIRES;
+ } else {
+ rt->rt6i_flags &= ~RTF_EXPIRES;
+ rt->rt6i_expires = 0;
}
} else if (valid_lft) {
+ int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
+ clock_t expires = 0;
+ if (~rt_expires) {
+ /* not infinity */
+ flags |= RTF_EXPIRES;
+ expires = jiffies_to_clock_t(rt_expires);
+ }
addrconf_prefix_route(&pinfo->prefix, pinfo->prefix_len,
- dev, jiffies_to_clock_t(rt_expires), RTF_ADDRCONF|RTF_EXPIRES|RTF_PREFIX_RT);
+ dev, expires, flags);
}
if (rt)
dst_release(&rt->u.dst);
@@ -2021,7 +2034,8 @@
struct inet6_dev *idev;
struct net_device *dev;
int scope;
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
ASSERT_RTNL();
@@ -2041,8 +2055,13 @@
if (valid_lft == INFINITY_LIFE_TIME) {
ifa_flags |= IFA_F_PERMANENT;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ expires = 0;
+ } else {
+ if (valid_lft >= 0x7FFFFFFF/HZ)
+ valid_lft = 0x7FFFFFFF/HZ;
+ flags = RTF_EXPIRES;
+ expires = jiffies_to_clock_t(valid_lft * HZ);
+ }
if (prefered_lft == 0)
ifa_flags |= IFA_F_DEPRECATED;
@@ -2060,7 +2079,7 @@
spin_unlock_bh(&ifp->lock);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
/*
* Note that section 3.1 of RFC 4429 indicates
* that the Optimistic flag should not be set for
@@ -3148,7 +3167,8 @@
static int inet6_addr_modify(struct inet6_ifaddr *ifp, u8 ifa_flags,
u32 prefered_lft, u32 valid_lft)
{
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
if (!valid_lft || (prefered_lft > valid_lft))
return -EINVAL;
@@ -3156,8 +3176,13 @@
if (valid_lft == INFINITY_LIFE_TIME) {
ifa_flags |= IFA_F_PERMANENT;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ expires = 0;
+ } else {
+ if (valid_lft >= 0x7FFFFFFF/HZ)
+ valid_lft = 0x7FFFFFFF/HZ;
+ flags = RTF_EXPIRES;
+ expires = jiffies_to_clock_t(valid_lft * HZ);
+ }
if (prefered_lft == 0)
ifa_flags |= IFA_F_DEPRECATED;
@@ -3176,7 +3201,7 @@
ipv6_ifa_notify(0, ifp);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->idev->dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
addrconf_verify(0);
return 0;
@@ -4242,7 +4267,7 @@
neigh_sysctl_register(idev->dev, idev->nd_parms, NET_IPV6,
NET_IPV6_NEIGH, "ipv6",
&ndisc_ifinfo_sysctl_change,
- NULL);
+ ndisc_ifinfo_sysctl_strategy);
__addrconf_sysctl_register(dev_net(idev->dev), idev->dev->name,
idev->dev->ifindex, idev, &idev->cnf);
}
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..1479618 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -197,7 +197,7 @@
const char *name = vif->dev ? vif->dev->name : "none";
seq_printf(seq,
- "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n",
+ "%2td %-10s %8ld %7ld %8ld %7ld %05X\n",
vif - vif6_table,
name, vif->bytes_in, vif->pkt_in,
vif->bytes_out, vif->pkt_out,
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index a55fc05..282fdb3 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1727,10 +1727,10 @@
return ret;
}
-static int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
- int nlen, void __user *oldval,
- size_t __user *oldlenp,
- void __user *newval, size_t newlen)
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 12bba08..48534c6 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -109,7 +109,7 @@
.negative_advice = ip6_negative_advice,
.link_failure = ip6_link_failure,
.update_pmtu = ip6_rt_update_pmtu,
- .local_out = ip6_local_out,
+ .local_out = __ip6_local_out,
.entry_size = sizeof(struct rt6_info),
.entries = ATOMIC_INIT(0),
};
@@ -475,7 +475,7 @@
lifetime = ntohl(rinfo->lifetime);
if (lifetime == 0xffffffff) {
/* infinity */
- } else if (lifetime > 0x7fffffff/HZ) {
+ } else if (lifetime > 0x7fffffff/HZ - 1) {
/* Avoid arithmetic overflow */
lifetime = 0x7fffffff/HZ - 1;
}
@@ -1106,7 +1106,9 @@
}
rt->u.dst.obsolete = -1;
- rt->rt6i_expires = jiffies + clock_t_to_jiffies(cfg->fc_expires);
+ rt->rt6i_expires = (cfg->fc_flags & RTF_EXPIRES) ?
+ jiffies + clock_t_to_jiffies(cfg->fc_expires) :
+ 0;
if (cfg->fc_protocol == RTPROT_UNSPEC)
cfg->fc_protocol = RTPROT_BOOT;
@@ -2200,7 +2202,9 @@
NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric);
- expires = rt->rt6i_expires ? rt->rt6i_expires - jiffies : 0;
+ expires = (rt->rt6i_flags & RTF_EXPIRES) ?
+ rt->rt6i_expires - jiffies : 0;
+
if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0,
expires, rt->u.dst.error) < 0)
goto nla_put_failure;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 5a6fab9..3de6ffd 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -403,9 +403,8 @@
static int ipip6_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
@@ -462,92 +461,6 @@
out:
read_unlock(&ipip6_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct ipv6hdr *iph6;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- int rel_info = 0;
- struct sk_buff *skb2;
- struct rt6_info *rt6i;
-
- if (len < hlen + sizeof(struct ipv6hdr))
- return;
- iph6 = (struct ipv6hdr*)(dp + hlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- if (icmp_hdr(skb)->un.gateway < hlen)
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMPV6_PARAMPROB;
- rel_info = icmp_hdr(skb)->un.gateway - hlen;
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* Too complicated case ... */
- return;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- rel_type = ICMPV6_TIME_EXCEED;
- rel_code = ICMPV6_EXC_HOPLIMIT;
- break;
- }
-
- /* Prepare fake skb to feed it to icmpv6_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)iph6);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- rt6i = rt6_lookup(dev_net(skb->dev), &iph6->saddr, NULL, NULL, 0);
- if (rt6i && rt6i->rt6i_dev) {
- skb2->dev = rt6i->rt6i_dev;
-
- rt6i = rt6_lookup(dev_net(skb->dev),
- &iph6->daddr, &iph6->saddr, NULL, 0);
-
- if (rt6i && rt6i->rt6i_dev && rt6i->rt6i_dev->type == ARPHRD_SIT) {
- struct ip_tunnel *t = netdev_priv(rt6i->rt6i_dev);
- if (rel_type == ICMPV6_TIME_EXCEED && t->parms.iph.ttl) {
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- }
- icmpv6_send(skb2, rel_type, rel_code, rel_info, skb2->dev);
- }
- }
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9e7236f..9bba7ac 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1251,7 +1251,7 @@
x->sel.prefixlen_s = addr->sadb_address_prefixlen;
}
- if (x->props.mode == XFRM_MODE_TRANSPORT)
+ if (!x->sel.family)
x->sel.family = x->props.family;
if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index e2ddde7..008de1f 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -286,12 +286,14 @@
*
* Sends received pdus to the sap state machine.
*/
-static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb)
+static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb,
+ struct sock *sk)
{
struct llc_sap_state_ev *ev = llc_sap_ev(skb);
ev->type = LLC_SAP_EV_TYPE_PDU;
ev->reason = 0;
+ skb->sk = sk;
llc_sap_state_process(sap, skb);
}
@@ -360,8 +362,7 @@
break;
sock_hold(sk);
- skb_set_owner_r(skb1, sk);
- llc_sap_rcv(sap, skb1);
+ llc_sap_rcv(sap, skb1, sk);
sock_put(sk);
}
read_unlock_bh(&sap->sk_list.lock);
@@ -381,8 +382,7 @@
} else {
struct sock *sk = llc_lookup_dgram(sap, &laddr);
if (sk) {
- skb_set_owner_r(skb, sk);
- llc_sap_rcv(sap, skb);
+ llc_sap_rcv(sap, skb, sk);
sock_put(sk);
} else
kfree_skb(skb);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 699d97b..a9fce4a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -672,7 +672,7 @@
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
} else
@@ -760,7 +760,7 @@
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
vlansdata->vif.type != IEEE80211_IF_TYPE_AP) {
rcu_read_unlock();
return -EINVAL;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 915afad..5c87645 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1313,7 +1313,7 @@
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
- * happen when it wakes up for the next time.
+ * when it wakes up for the next time.
*/
sta->flags |= WLAN_STA_CLEAR_PS_FILT;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4adba09..841278f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -730,7 +730,17 @@
if (bss->wmm_ie) {
wmm = 1;
}
+
+ /* get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode) */
+ rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
ieee80211_rx_bss_put(dev, bss);
+ } else {
+ rates = ~0;
+ rates_len = sband->n_bitrates;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
@@ -761,10 +771,7 @@
*pos++ = ifsta->ssid_len;
memcpy(pos, ifsta->ssid, ifsta->ssid_len);
- /* all supported rates should be added here but some APs
- * (e.g. D-Link DAP 1353 in b-only mode) don't like that
- * Therefore only add rates the AP supports */
- rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+ /* add all rates which were marked to be used above */
supp_rates_len = rates_len;
if (supp_rates_len > 8)
supp_rates_len = 8;
@@ -1318,7 +1325,7 @@
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
- kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
@@ -1327,7 +1334,7 @@
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
- buf_size * sizeof(struct sk_buf *));
+ buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
@@ -1607,7 +1614,7 @@
* only one argument, and both sta_info and TID are needed, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
- u16 tid = *(int *)data;
+ u16 tid = *(u8 *)data;
struct sta_info *temp_sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
@@ -1655,7 +1662,7 @@
void sta_rx_agg_session_timer_expired(unsigned long data)
{
/* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and verious sta_info are needed here, so init
+ * only one argument, and various sta_info are needed here, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
@@ -2472,8 +2479,6 @@
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_rx_bss_put(dev, bss);
-
return res;
}
@@ -3446,21 +3451,17 @@
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
- if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
- IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
- ifsta->state = IEEE80211_AUTHENTICATE;
- ieee80211_sta_reset_auth(dev, ifsta);
- return 0;
- }
-
spin_lock_bh(&local->sta_bss_lock);
freq = local->oper_channel->center_freq;
list_for_each_entry(bss, &local->sta_bss_list, list) {
if (!(bss->capability & WLAN_CAPABILITY_ESS))
continue;
- if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
- !!sdata->default_key)
+ if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+ IEEE80211_STA_AUTO_BSSID_SEL |
+ IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+ (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+ !!sdata->default_key))
continue;
if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
@@ -3520,6 +3521,7 @@
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
+ int ret;
DECLARE_MAC_BUF(mac);
#if 0
@@ -3564,7 +3566,9 @@
*pos++ = (u8) (rate / 5);
}
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
@@ -3612,10 +3616,13 @@
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len))) {
+ int ret;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
dev->name, print_mac(mac, bssid));
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
@@ -4092,19 +4099,18 @@
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = bss->freq;
- iwe.u.freq.e = 6;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
- IW_EV_FREQ_LEN);
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWFREQ;
iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = bss->freq;
+ iwe.u.freq.e = 6;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+ IW_EV_FREQ_LEN);
+ memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = bss->signal;
iwe.u.qual.level = bss->rssi;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 1958bfb3..0941e5d 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1091,7 +1091,7 @@
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
- u8 src[ETH_ALEN];
+ u8 src[ETH_ALEN] __aligned(2);
struct sk_buff *skb = rx->skb;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
@@ -1234,7 +1234,7 @@
*/
static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
{
- static const u8 pae_group_addr[ETH_ALEN]
+ static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 24a465c..4e97b26 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -34,11 +34,11 @@
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] =
+const unsigned char rfc1042_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] =
+const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
@@ -389,6 +389,41 @@
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
+ rtnl_lock();
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ switch (sdata->vif.type) {
+ case IEEE80211_IF_TYPE_INVALID:
+ case IEEE80211_IF_TYPE_MNTR:
+ case IEEE80211_IF_TYPE_VLAN:
+ continue;
+ case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_IBSS:
+ case IEEE80211_IF_TYPE_WDS:
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ break;
+ }
+ if (sdata->dev == local->mdev)
+ continue;
+ if (netif_running(sdata->dev))
+ iterator(data, sdata->dev->dev_addr,
+ &sdata->vif);
+ }
+
+ rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+ struct ieee80211_hw *hw,
+ void (*iterator)(void *data, u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
+
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -413,4 +448,4 @@
rcu_read_unlock();
}
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 76e1de1..8311bb2 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -209,7 +209,6 @@
range->num_frequency = c;
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
@@ -490,9 +489,14 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
- return 0;
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ ap_addr->sa_family = ARPHRD_ETHER;
+ memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
+ return 0;
+ } else {
+ memset(&ap_addr->sa_data, 0, ETH_ALEN);
+ return 0;
+ }
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index e31beeb..e8f0dea 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -587,10 +587,10 @@
return 0;
err3:
+ kmem_cache_destroy(nf_ct_expect_cachep);
+err2:
nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
nf_ct_expect_hsize);
-err2:
- kmem_cache_destroy(nf_ct_expect_cachep);
err1:
return err;
}
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 1086df7..9360fc8 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -220,7 +220,7 @@
tp = kzalloc(sizeof(*tp), GFP_KERNEL);
if (tp == NULL)
goto errout;
- err = -EINVAL;
+ err = -ENOENT;
tp_ops = tcf_proto_lookup_ops(tca[TCA_KIND]);
if (tp_ops == NULL) {
#ifdef CONFIG_KMOD
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index d8e8d79..e46c825 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -6,30 +6,9 @@
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/fcntl.h>
-#include <linux/net.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/udp.h>
-#include <linux/tcp.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/file.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <net/sock.h>
-#include <net/checksum.h>
-#include <net/ip.h>
-#include <net/ipv6.h>
-#include <net/tcp_states.h>
-#include <linux/uaccess.h>
-#include <asm/ioctls.h>
-
-#include <linux/sunrpc/types.h>
-#include <linux/sunrpc/clnt.h>
-#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svc_xprt.h>
@@ -296,8 +275,6 @@
if (!(xprt->xpt_flags &
((1<<XPT_CONN)|(1<<XPT_DATA)|(1<<XPT_CLOSE)|(1<<XPT_DEFERRED))))
return;
- if (test_bit(XPT_DEAD, &xprt->xpt_flags))
- return;
cpu = get_cpu();
pool = svc_pool_for_cpu(xprt->xpt_server, cpu);
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 3f30ee6..f24800f 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -278,7 +278,7 @@
dom = im->m_client->h.name;
if (ipv6_addr_v4mapped(&addr)) {
- seq_printf(m, "%s" NIPQUAD_FMT "%s\n",
+ seq_printf(m, "%s " NIPQUAD_FMT " %s\n",
im->m_class,
ntohl(addr.s6_addr32[3]) >> 24 & 0xff,
ntohl(addr.s6_addr32[3]) >> 16 & 0xff,
@@ -286,7 +286,7 @@
ntohl(addr.s6_addr32[3]) >> 0 & 0xff,
dom);
} else {
- seq_printf(m, "%s" NIP6_FMT "%s\n",
+ seq_printf(m, "%s " NIP6_FMT " %s\n",
im->m_class, NIP6(addr), dom);
}
return 0;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index c22d6b6..06ab484 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -260,11 +260,16 @@
* On our side, we need to read into a pagelist. The first page immediately
* follows the RPC header.
*
- * This function returns 1 to indicate success. The data is not yet in
+ * This function returns:
+ * 0 - No error and no read-list found.
+ *
+ * 1 - Successful read-list processing. The data is not yet in
* the pagelist and therefore the RPC request must be deferred. The
* I/O completion will enqueue the transport again and
* svc_rdma_recvfrom will complete the request.
*
+ * <0 - Error processing/posting read-list.
+ *
* NOTE: The ctxt must not be touched after the last WR has been posted
* because the I/O completion processing may occur on another
* processor and free / modify the context. Ne touche pas!
@@ -284,7 +289,6 @@
u64 sgl_offset;
struct rpcrdma_read_chunk *ch;
struct svc_rdma_op_ctxt *ctxt = NULL;
- struct svc_rdma_op_ctxt *head;
struct svc_rdma_op_ctxt *tmp_sge_ctxt;
struct svc_rdma_op_ctxt *tmp_ch_ctxt;
struct chunk_sge *ch_sge_ary;
@@ -302,25 +306,19 @@
ch_sge_ary = (struct chunk_sge *)tmp_ch_ctxt->sge;
svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count);
+ if (ch_count > RPCSVC_MAXPAGES)
+ return -EINVAL;
sge_count = rdma_rcl_to_sge(xprt, rqstp, hdr_ctxt, rmsgp,
sge, ch_sge_ary,
ch_count, byte_count);
- head = svc_rdma_get_context(xprt);
sgl_offset = 0;
ch_no = 0;
for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
ch->rc_discrim != 0; ch++, ch_no++) {
next_sge:
- if (!ctxt)
- ctxt = head;
- else {
- ctxt->next = svc_rdma_get_context(xprt);
- ctxt = ctxt->next;
- }
- ctxt->next = NULL;
+ ctxt = svc_rdma_get_context(xprt);
ctxt->direction = DMA_FROM_DEVICE;
- clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
/* Prepare READ WR */
@@ -347,20 +345,15 @@
* the client and the RPC needs to be enqueued.
*/
set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
+ ctxt->read_hdr = hdr_ctxt;
}
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
- printk(KERN_ERR "svcrdma: Error posting send = %d\n",
+ printk(KERN_ERR "svcrdma: Error %d posting RDMA_READ\n",
err);
- /*
- * Break the circular list so free knows when
- * to stop if the error happened to occur on
- * the last read
- */
- ctxt->next = NULL;
+ set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
goto out;
}
atomic_inc(&rdma_stat_read);
@@ -371,7 +364,7 @@
goto next_sge;
}
sgl_offset = 0;
- err = 0;
+ err = 1;
}
out:
@@ -389,25 +382,12 @@
while (rqstp->rq_resused)
rqstp->rq_respages[--rqstp->rq_resused] = NULL;
- if (err) {
- printk(KERN_ERR "svcrdma : RDMA_READ error = %d\n", err);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- /* Free the linked list of read contexts */
- while (head != NULL) {
- ctxt = head->next;
- svc_rdma_put_context(head, 1);
- head = ctxt;
- }
- return 0;
- }
-
- return 1;
+ return err;
}
static int rdma_read_complete(struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *data)
+ struct svc_rdma_op_ctxt *head)
{
- struct svc_rdma_op_ctxt *head = data->next;
int page_no;
int ret;
@@ -433,21 +413,12 @@
rqstp->rq_arg.len = head->arg.len;
rqstp->rq_arg.buflen = head->arg.buflen;
+ /* Free the context */
+ svc_rdma_put_context(head, 0);
+
/* XXX: What should this be? */
rqstp->rq_prot = IPPROTO_MAX;
-
- /*
- * Free the contexts we used to build the RDMA_READ. We have
- * to be careful here because the context list uses the same
- * next pointer used to chain the contexts associated with the
- * RDMA_READ
- */
- data->next = NULL; /* terminate circular list */
- do {
- data = head->next;
- svc_rdma_put_context(head, 0);
- head = data;
- } while (head != NULL);
+ svc_xprt_copy_addrs(rqstp, rqstp->rq_xprt);
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
@@ -457,8 +428,6 @@
ret, rqstp->rq_arg.len, rqstp->rq_arg.head[0].iov_base,
rqstp->rq_arg.head[0].iov_len);
- /* Indicate that we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
svc_xprt_received(rqstp->rq_xprt);
return ret;
}
@@ -480,13 +449,6 @@
dprintk("svcrdma: rqstp=%p\n", rqstp);
- /*
- * The rq_xprt_ctxt indicates if we've consumed an RQ credit
- * or not. It is used in the rdma xpo_release_rqst function to
- * determine whether or not to return an RQ WQE to the RQ.
- */
- rqstp->rq_xprt_ctxt = NULL;
-
spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
@@ -537,21 +499,22 @@
/* If the request is invalid, reply with an error */
if (len < 0) {
if (len == -ENOSYS)
- (void)svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
+ svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
goto close_out;
}
- /* Read read-list data. If we would need to wait, defer
- * it. Not that in this case, we don't return the RQ credit
- * until after the read completes.
- */
- if (rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt)) {
+ /* Read read-list data. */
+ ret = rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt);
+ if (ret > 0) {
+ /* read-list posted, defer until data received from client. */
svc_xprt_received(xprt);
return 0;
}
-
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
+ if (ret < 0) {
+ /* Post of read-list failed, free context. */
+ svc_rdma_put_context(ctxt, 1);
+ return 0;
+ }
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
@@ -569,11 +532,8 @@
return ret;
close_out:
- if (ctxt) {
+ if (ctxt)
svc_rdma_put_context(ctxt, 1);
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
- }
dprintk("svcrdma: transport %p is closing\n", xprt);
/*
* Set the close bit and enqueue it. svc_recv will see the
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 981f190..fb82b1b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -389,6 +389,17 @@
int page_no;
int ret;
+ /* Post a recv buffer to handle another request. */
+ ret = svc_rdma_post_recv(rdma);
+ if (ret) {
+ printk(KERN_INFO
+ "svcrdma: could not post a receive buffer, err=%d."
+ "Closing transport %p.\n", ret, rdma);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
+ return -ENOTCONN;
+ }
+
/* Prepare the context */
ctxt->pages[0] = page;
ctxt->count = 1;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index af408fc..e132509 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -103,8 +103,8 @@
spin_lock_bh(&xprt->sc_ctxt_lock);
if (ctxt) {
at_least_one = 1;
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
} else {
/* kmalloc failed...give up for now */
xprt->sc_ctxt_cnt--;
@@ -123,7 +123,7 @@
while (1) {
spin_lock_bh(&xprt->sc_ctxt_lock);
- if (unlikely(xprt->sc_ctxt_head == NULL)) {
+ if (unlikely(list_empty(&xprt->sc_ctxt_free))) {
/* Try to bump my cache. */
spin_unlock_bh(&xprt->sc_ctxt_lock);
@@ -136,12 +136,15 @@
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
continue;
}
- ctxt = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt->next;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
spin_unlock_bh(&xprt->sc_ctxt_lock);
ctxt->xprt = xprt;
INIT_LIST_HEAD(&ctxt->dto_q);
ctxt->count = 0;
+ atomic_inc(&xprt->sc_ctxt_used);
break;
}
return ctxt;
@@ -159,14 +162,15 @@
put_page(ctxt->pages[i]);
for (i = 0; i < ctxt->count; i++)
- dma_unmap_single(xprt->sc_cm_id->device->dma_device,
- ctxt->sge[i].addr,
- ctxt->sge[i].length,
- ctxt->direction);
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
+ ctxt->sge[i].addr,
+ ctxt->sge[i].length,
+ ctxt->direction);
+
spin_lock_bh(&xprt->sc_ctxt_lock);
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
spin_unlock_bh(&xprt->sc_ctxt_lock);
+ atomic_dec(&xprt->sc_ctxt_used);
}
/* ib_cq event handler */
@@ -228,23 +232,8 @@
list_del_init(&xprt->sc_dto_q);
spin_unlock_irqrestore(&dto_lock, flags);
- if (test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
- rq_cq_reap(xprt);
- set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- /*
- * If data arrived before established event,
- * don't enqueue. This defers RPC I/O until the
- * RDMA connection is complete.
- */
- if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
- svc_xprt_enqueue(&xprt->sc_xprt);
- }
-
- if (test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- sq_cq_reap(xprt);
- }
+ rq_cq_reap(xprt);
+ sq_cq_reap(xprt);
svc_xprt_put(&xprt->sc_xprt);
spin_lock_irqsave(&dto_lock, flags);
@@ -263,11 +252,15 @@
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an SQ
* completion.
- */
+ */
set_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags);
/*
@@ -290,6 +283,8 @@
*
* Take all completing WC off the CQE and enqueue the associated DTO
* context on the dto_q for the transport.
+ *
+ * Note that caller must hold a transport reference.
*/
static void rq_cq_reap(struct svcxprt_rdma *xprt)
{
@@ -297,29 +292,47 @@
struct ib_wc wc;
struct svc_rdma_op_ctxt *ctxt = NULL;
+ if (!test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_rq_poll);
- spin_lock_bh(&xprt->sc_rq_dto_lock);
while ((ret = ib_poll_cq(xprt->sc_rq_cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
ctxt->wc_status = wc.status;
ctxt->byte_len = wc.byte_len;
if (wc.status != IB_WC_SUCCESS) {
/* Close the transport */
+ dprintk("svcrdma: transport closing putting ctxt %p\n", ctxt);
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
continue;
}
+ spin_lock_bh(&xprt->sc_rq_dto_lock);
list_add_tail(&ctxt->dto_q, &xprt->sc_rq_dto_q);
+ spin_unlock_bh(&xprt->sc_rq_dto_lock);
+ svc_xprt_put(&xprt->sc_xprt);
}
- spin_unlock_bh(&xprt->sc_rq_dto_lock);
if (ctxt)
atomic_inc(&rdma_stat_rq_prod);
+
+ set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
+ /*
+ * If data arrived before established event,
+ * don't enqueue. This defers RPC I/O until the
+ * RDMA connection is complete.
+ */
+ if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
+ svc_xprt_enqueue(&xprt->sc_xprt);
}
/*
* Send Queue Completion Handler - potentially called on interrupt context.
+ *
+ * Note that caller must hold a transport reference.
*/
static void sq_cq_reap(struct svcxprt_rdma *xprt)
{
@@ -328,6 +341,11 @@
struct ib_cq *cq = xprt->sc_sq_cq;
int ret;
+
+ if (!test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_sq_poll);
while ((ret = ib_poll_cq(cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
@@ -349,14 +367,16 @@
case IB_WR_RDMA_READ:
if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
+ struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
+ BUG_ON(!read_hdr);
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- set_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
spin_lock_bh(&xprt->sc_read_complete_lock);
- list_add_tail(&ctxt->dto_q,
+ list_add_tail(&read_hdr->dto_q,
&xprt->sc_read_complete_q);
spin_unlock_bh(&xprt->sc_read_complete_lock);
svc_xprt_enqueue(&xprt->sc_xprt);
}
+ svc_rdma_put_context(ctxt, 0);
break;
default:
@@ -365,6 +385,7 @@
wc.opcode, wc.status);
break;
}
+ svc_xprt_put(&xprt->sc_xprt);
}
if (ctxt)
@@ -376,11 +397,15 @@
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an RQ
* completion.
- */
+ */
set_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags);
/*
@@ -407,28 +432,29 @@
xprt->sc_ctxt_max = ctxt_max;
xprt->sc_ctxt_bump = ctxt_bump;
xprt->sc_ctxt_cnt = 0;
- xprt->sc_ctxt_head = NULL;
+ atomic_set(&xprt->sc_ctxt_used, 0);
+
+ INIT_LIST_HEAD(&xprt->sc_ctxt_free);
for (i = 0; i < ctxt_count; i++) {
ctxt = kmalloc(sizeof(*ctxt), GFP_KERNEL);
if (ctxt) {
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
xprt->sc_ctxt_cnt++;
}
}
}
-static void destroy_context_cache(struct svc_rdma_op_ctxt *ctxt)
+static void destroy_context_cache(struct svcxprt_rdma *xprt)
{
- struct svc_rdma_op_ctxt *next;
- if (!ctxt)
- return;
-
- do {
- next = ctxt->next;
+ while (!list_empty(&xprt->sc_ctxt_free)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
kfree(ctxt);
- ctxt = next;
- } while (next);
+ }
}
static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
@@ -465,7 +491,7 @@
reqs +
cma_xprt->sc_sq_depth +
RPCRDMA_MAX_THREADS + 1); /* max */
- if (!cma_xprt->sc_ctxt_head) {
+ if (list_empty(&cma_xprt->sc_ctxt_free)) {
kfree(cma_xprt);
return NULL;
}
@@ -520,7 +546,12 @@
recv_wr.num_sge = ctxt->count;
recv_wr.wr_id = (u64)(unsigned long)ctxt;
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
+ if (ret) {
+ svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_put_context(ctxt, 1);
+ }
return ret;
}
@@ -539,6 +570,7 @@
{
struct svcxprt_rdma *listen_xprt = new_cma_id->context;
struct svcxprt_rdma *newxprt;
+ struct sockaddr *sa;
/* Create a new transport */
newxprt = rdma_create_xprt(listen_xprt->sc_xprt.xpt_server, 0);
@@ -551,6 +583,12 @@
dprintk("svcrdma: Creating newxprt=%p, cm_id=%p, listenxprt=%p\n",
newxprt, newxprt->sc_cm_id, listen_xprt);
+ /* Set the local and remote addresses in the transport */
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
+ svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
+ svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+
/*
* Enqueue the new transport on the accept queue of the listening
* transport
@@ -627,6 +665,7 @@
if (xprt) {
set_bit(XPT_CLOSE, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
break;
case RDMA_CM_EVENT_DEVICE_REMOVAL:
@@ -661,31 +700,27 @@
cma_xprt = rdma_create_xprt(serv, 1);
if (!cma_xprt)
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
xprt = &cma_xprt->sc_xprt;
listen_id = rdma_create_id(rdma_listen_handler, cma_xprt, RDMA_PS_TCP);
if (IS_ERR(listen_id)) {
- svc_xprt_put(&cma_xprt->sc_xprt);
- dprintk("svcrdma: rdma_create_id failed = %ld\n",
- PTR_ERR(listen_id));
- return (void *)listen_id;
+ ret = PTR_ERR(listen_id);
+ dprintk("svcrdma: rdma_create_id failed = %d\n", ret);
+ goto err0;
}
+
ret = rdma_bind_addr(listen_id, sa);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_bind_addr failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
cma_xprt->sc_cm_id = listen_id;
ret = rdma_listen(listen_id, RPCRDMA_LISTEN_BACKLOG);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_listen failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
/*
@@ -696,6 +731,12 @@
svc_xprt_set_local(&cma_xprt->sc_xprt, sa, salen);
return &cma_xprt->sc_xprt;
+
+ err1:
+ rdma_destroy_id(listen_id);
+ err0:
+ kfree(cma_xprt);
+ return ERR_PTR(ret);
}
/*
@@ -716,7 +757,6 @@
struct rdma_conn_param conn_param;
struct ib_qp_init_attr qp_attr;
struct ib_device_attr devattr;
- struct sockaddr *sa;
int ret;
int i;
@@ -826,7 +866,6 @@
newxprt->sc_sq_depth = qp_attr.cap.max_send_wr;
newxprt->sc_max_requests = qp_attr.cap.max_recv_wr;
}
- svc_xprt_get(&newxprt->sc_xprt);
newxprt->sc_qp = newxprt->sc_cm_id->qp;
/* Register all of physical memory */
@@ -850,6 +889,13 @@
/* Swap out the handler */
newxprt->sc_cm_id->event_handler = rdma_cma_handler;
+ /*
+ * Arm the CQs for the SQ and RQ before accepting so we can't
+ * miss the first message
+ */
+ ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
+ ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
+
/* Accept Connection */
set_bit(RDMAXPRT_CONN_PENDING, &newxprt->sc_flags);
memset(&conn_param, 0, sizeof conn_param);
@@ -886,58 +932,26 @@
newxprt->sc_max_requests,
newxprt->sc_ord);
- /* Set the local and remote addresses in the transport */
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
- svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
- svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
-
- ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
return &newxprt->sc_xprt;
errout:
dprintk("svcrdma: failure accepting new connection rc=%d.\n", ret);
/* Take a reference in case the DTO handler runs */
svc_xprt_get(&newxprt->sc_xprt);
- if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp)) {
+ if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp))
ib_destroy_qp(newxprt->sc_qp);
- svc_xprt_put(&newxprt->sc_xprt);
- }
rdma_destroy_id(newxprt->sc_cm_id);
/* This call to put will destroy the transport */
svc_xprt_put(&newxprt->sc_xprt);
return NULL;
}
-/*
- * Post an RQ WQE to the RQ when the rqst is being released. This
- * effectively returns an RQ credit to the client. The rq_xprt_ctxt
- * will be null if the request is deferred due to an RDMA_READ or the
- * transport had no data ready (EAGAIN). Note that an RPC deferred in
- * svc_process will still return the credit, this is because the data
- * is copied and no longer consume a WQE/WC.
- */
static void svc_rdma_release_rqst(struct svc_rqst *rqstp)
{
- int err;
- struct svcxprt_rdma *rdma =
- container_of(rqstp->rq_xprt, struct svcxprt_rdma, sc_xprt);
- if (rqstp->rq_xprt_ctxt) {
- BUG_ON(rqstp->rq_xprt_ctxt != rdma);
- err = svc_rdma_post_recv(rdma);
- if (err)
- dprintk("svcrdma: failed to post an RQ WQE error=%d\n",
- err);
- }
- rqstp->rq_xprt_ctxt = NULL;
}
/*
- * When connected, an svc_xprt has at least three references:
- *
- * - A reference held by the QP. We still hold that here because this
- * code deletes the QP and puts the reference.
+ * When connected, an svc_xprt has at least two references:
*
* - A reference held by the cm_id between the ESTABLISHED and
* DISCONNECTED events. If the remote peer disconnected first, this
@@ -946,7 +960,7 @@
* - A reference held by the svc_recv code that called this function
* as part of close processing.
*
- * At a minimum two references should still be held.
+ * At a minimum one references should still be held.
*/
static void svc_rdma_detach(struct svc_xprt *xprt)
{
@@ -956,23 +970,53 @@
/* Disconnect and flush posted WQE */
rdma_disconnect(rdma->sc_cm_id);
-
- /* Destroy the QP if present (not a listener) */
- if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) {
- ib_destroy_qp(rdma->sc_qp);
- svc_xprt_put(xprt);
- }
-
- /* Destroy the CM ID */
- rdma_destroy_id(rdma->sc_cm_id);
}
-static void svc_rdma_free(struct svc_xprt *xprt)
+static void __svc_rdma_free(struct work_struct *work)
{
- struct svcxprt_rdma *rdma = (struct svcxprt_rdma *)xprt;
+ struct svcxprt_rdma *rdma =
+ container_of(work, struct svcxprt_rdma, sc_work);
dprintk("svcrdma: svc_rdma_free(%p)\n", rdma);
+
/* We should only be called from kref_put */
- BUG_ON(atomic_read(&xprt->xpt_ref.refcount) != 0);
+ BUG_ON(atomic_read(&rdma->sc_xprt.xpt_ref.refcount) != 0);
+
+ /*
+ * Destroy queued, but not processed read completions. Note
+ * that this cleanup has to be done before destroying the
+ * cm_id because the device ptr is needed to unmap the dma in
+ * svc_rdma_put_context.
+ */
+ spin_lock_bh(&rdma->sc_read_complete_lock);
+ while (!list_empty(&rdma->sc_read_complete_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_read_complete_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_read_complete_lock);
+
+ /* Destroy queued, but not processed recv completions */
+ spin_lock_bh(&rdma->sc_rq_dto_lock);
+ while (!list_empty(&rdma->sc_rq_dto_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_rq_dto_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_rq_dto_lock);
+
+ /* Warn if we leaked a resource or under-referenced */
+ WARN_ON(atomic_read(&rdma->sc_ctxt_used) != 0);
+
+ /* Destroy the QP if present (not a listener) */
+ if (rdma->sc_qp && !IS_ERR(rdma->sc_qp))
+ ib_destroy_qp(rdma->sc_qp);
+
if (rdma->sc_sq_cq && !IS_ERR(rdma->sc_sq_cq))
ib_destroy_cq(rdma->sc_sq_cq);
@@ -985,10 +1029,21 @@
if (rdma->sc_pd && !IS_ERR(rdma->sc_pd))
ib_dealloc_pd(rdma->sc_pd);
- destroy_context_cache(rdma->sc_ctxt_head);
+ /* Destroy the CM ID */
+ rdma_destroy_id(rdma->sc_cm_id);
+
+ destroy_context_cache(rdma);
kfree(rdma);
}
+static void svc_rdma_free(struct svc_xprt *xprt)
+{
+ struct svcxprt_rdma *rdma =
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
+ INIT_WORK(&rdma->sc_work, __svc_rdma_free);
+ schedule_work(&rdma->sc_work);
+}
+
static int svc_rdma_has_wspace(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
@@ -1018,7 +1073,7 @@
int ret;
if (test_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags))
- return 0;
+ return -ENOTCONN;
BUG_ON(wr->send_flags != IB_SEND_SIGNALED);
BUG_ON(((struct svc_rdma_op_ctxt *)(unsigned long)wr->wr_id)->wr_op !=
@@ -1029,7 +1084,8 @@
if (xprt->sc_sq_depth == atomic_read(&xprt->sc_sq_count)) {
spin_unlock_bh(&xprt->sc_lock);
atomic_inc(&rdma_stat_sq_starve);
- /* See if we can reap some SQ WR */
+
+ /* See if we can opportunistically reap SQ WR to make room */
sq_cq_reap(xprt);
/* Wait until SQ WR available if SQ still full */
@@ -1041,22 +1097,25 @@
continue;
}
/* Bumped used SQ WR count and post */
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_send(xprt->sc_qp, wr, &bad_wr);
if (!ret)
atomic_inc(&xprt->sc_sq_count);
- else
+ else {
+ svc_xprt_put(&xprt->sc_xprt);
dprintk("svcrdma: failed to post SQ WR rc=%d, "
"sc_sq_count=%d, sc_sq_depth=%d\n",
ret, atomic_read(&xprt->sc_sq_count),
xprt->sc_sq_depth);
+ }
spin_unlock_bh(&xprt->sc_lock);
break;
}
return ret;
}
-int svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
- enum rpcrdma_errcode err)
+void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
+ enum rpcrdma_errcode err)
{
struct ib_send_wr err_wr;
struct ib_sge sge;
@@ -1094,9 +1153,8 @@
/* Post It */
ret = svc_rdma_send(xprt, &err_wr);
if (ret) {
- dprintk("svcrdma: Error posting send = %d\n", ret);
+ dprintk("svcrdma: Error %d posting send for protocol error\n",
+ ret);
svc_rdma_put_context(ctxt, 1);
}
-
- return ret;
}
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index a1b0fbe..b976d9e 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -50,19 +50,8 @@
switch (type) {
case XFRMA_ALG_AUTH:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "digest_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_CRYPT:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "cipher_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_COMP:
- /* Zero length keys are legal. */
break;
default:
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a098a04..17092d6 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -43,7 +43,13 @@
include include/config/auto.conf
include scripts/Kbuild.include
+# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
ifneq ($(KBUILD_EXTMOD),)
+
+# set src + obj - they may be used when building the .mod.c file
+obj := $(KBUILD_EXTMOD)
+src := $(obj)
+
# Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
diff --git a/scripts/decodecode b/scripts/decodecode
old mode 100644
new mode 100755
diff --git a/scripts/ver_linux b/scripts/ver_linux
index ab69ece..7ac0e30 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -12,12 +12,9 @@
uname -a
echo ' '
-gcc --version 2>&1| head -n 1 | grep -v gcc | awk \
+gcc -dumpversion 2>&1| awk \
'NR==1{print "Gnu C ", $1}'
-gcc --version 2>&1| grep gcc | awk \
-'NR==1{print "Gnu C ", $3}'
-
make --version 2>&1 | awk -F, '{print $1}' | awk \
'/GNU Make/{print "Gnu make ",$NF}'
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index b5c8f92..4a09293 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1881,6 +1881,18 @@
final = sbsp->smk_default;
/*
+ * If this is the root inode the superblock
+ * may be in the process of initialization.
+ * If that is the case use the root value out
+ * of the superblock.
+ */
+ if (opt_dentry->d_parent == opt_dentry) {
+ isp->smk_inode = sbsp->smk_root;
+ isp->smk_flags |= SMK_INODE_INSTANT;
+ goto unlockandout;
+ }
+
+ /*
* This is pretty hackish.
* Casey says that we shouldn't have to do
* file system specific code, but it does help
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 812f91b..6c8ab48 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -259,8 +259,9 @@
return minor;
}
snd_minors[minor] = preg;
- preg->dev = device_create(sound_class, device, MKDEV(major, minor),
- "%s", name);
+ preg->dev = device_create_drvdata(sound_class, device,
+ MKDEV(major, minor),
+ private_data, "%s", name);
if (IS_ERR(preg->dev)) {
snd_minors[minor] = NULL;
mutex_unlock(&sound_mutex);
@@ -269,9 +270,6 @@
return minor;
}
- if (preg->dev)
- dev_set_drvdata(preg->dev, private_data);
-
mutex_unlock(&sound_mutex);
return 0;
}
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index 54a1f90..1899cf0 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -96,7 +96,7 @@
return -EINVAL;
hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE;
+ pcsp_chip.timer.cb_mode = HRTIMER_CB_SOFTIRQ;
pcsp_chip.timer.function = pcsp_do_timer;
card = snd_card_new(index, id, THIS_MODULE, 0);
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index f07cc1e..1d661f7 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -24,7 +24,8 @@
/* default timer freq for PC-Speaker: 18643 Hz */
#define DIV_18KHZ 64
#define MAX_DIV DIV_18KHZ
-#define CUR_DIV() (MAX_DIV >> chip->treble)
+#define CALC_DIV(d) (MAX_DIV >> (d))
+#define CUR_DIV() CALC_DIV(chip->treble)
#define PCSP_MAX_TREBLE 1
/* unfortunately, with hrtimers 37KHz does not work very well :( */
@@ -36,7 +37,8 @@
#define PCSP_DEFAULT_SDIV (DIV_18KHZ >> 1)
#define PCSP_DEFAULT_SRATE (PIT_TICK_RATE / PCSP_DEFAULT_SDIV)
#define PCSP_INDEX_INC() (1 << (PCSP_MAX_TREBLE - chip->treble))
-#define PCSP_RATE() (PIT_TICK_RATE / CUR_DIV())
+#define PCSP_CALC_RATE(i) (PIT_TICK_RATE / CALC_DIV(i))
+#define PCSP_RATE() PCSP_CALC_RATE(chip->treble)
#define PCSP_MIN_RATE__1 MAX_DIV/PIT_TICK_RATE
#define PCSP_MAX_RATE__1 MIN_DIV/PIT_TICK_RATE
#define PCSP_MAX_PERIOD_NS (1000000000ULL * PCSP_MIN_RATE__1)
diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c
index 7ad4a15..e341f3f 100644
--- a/sound/drivers/pcsp/pcsp_lib.c
+++ b/sound/drivers/pcsp/pcsp_lib.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <sound/pcm.h>
-#include <linux/interrupt.h>
#include <asm/io.h>
#include "pcsp.h"
@@ -20,34 +19,8 @@
#define DMIX_WANTS_S16 1
-static void pcsp_start_timer(unsigned long dummy)
-{
- hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
-}
-
-/*
- * We need the hrtimer_start as a tasklet to avoid
- * the nasty locking problem. :(
- * The problem:
- * - The timer handler is called with the cpu_base->lock
- * already held by hrtimer code.
- * - snd_pcm_period_elapsed() takes the
- * substream->self_group.lock.
- * So far so good.
- * But the snd_pcsp_trigger() is called with the
- * substream->self_group.lock held, and it calls
- * hrtimer_start(), which takes the cpu_base->lock.
- * You see the problem. We have the code pathes
- * which take two locks in a reverse order. This
- * can deadlock and the lock validator complains.
- * The only solution I could find was to move the
- * hrtimer_start() into a tasklet. -stsp
- */
-static DECLARE_TASKLET(pcsp_start_timer_tasklet, pcsp_start_timer, 0);
-
enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
{
- unsigned long flags;
unsigned char timer_cnt, val;
int fmt_size, periods_elapsed;
u64 ns;
@@ -66,9 +39,7 @@
return HRTIMER_RESTART;
}
- /* hrtimer calls us from both hardirq and softirq contexts,
- * so irqsave :( */
- spin_lock_irqsave(&chip->substream_lock, flags);
+ spin_lock_irq(&chip->substream_lock);
/* Takashi Iwai says regarding this extra lock:
If the irq handler handles some data on the DMA buffer, it should
@@ -139,7 +110,7 @@
chip->period_ptr %= buffer_bytes;
}
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
if (!atomic_read(&chip->timer_active))
return HRTIMER_NORESTART;
@@ -153,7 +124,7 @@
exit_nr_unlock2:
snd_pcm_stream_unlock(substream);
exit_nr_unlock1:
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
return HRTIMER_NORESTART;
}
@@ -174,7 +145,7 @@
atomic_set(&chip->timer_active, 1);
chip->thalf = 0;
- tasklet_schedule(&pcsp_start_timer_tasklet);
+ hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
}
static void pcsp_stop_playing(struct snd_pcsp *chip)
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index 64a695f..caeb0f5 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,7 +50,8 @@
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d", PCSP_RATE());
+ sprintf(uinfo->value.enumerated.name, "%d",
+ PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 857008b..3be2dc1 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -79,7 +79,7 @@
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
@@ -143,7 +143,7 @@
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 2da8981..1292dce 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1971,6 +1971,9 @@
val = ac97->regs[AC97_AD_MISC];
ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+ if (ac97->spec.ad18xx.lo_as_master)
+ ucontrol->value.integer.value[0] =
+ !ucontrol->value.integer.value[0];
return 0;
}
@@ -1979,8 +1982,10 @@
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- val = !ucontrol->value.integer.value[0]
- ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+ val = !ucontrol->value.integer.value[0];
+ if (ac97->spec.ad18xx.lo_as_master)
+ val = !val;
+ val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
return snd_ac97_update_bits(ac97, AC97_AD_MISC,
AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
}
@@ -2031,7 +2036,7 @@
{
unsigned short val = 0;
/* clear LODIS if shared jack is to be used for Surround out */
- if (is_shared_linein(ac97))
+ if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
val |= (1 << 12);
/* clear CLDIS if shared jack is to be used for C/LFE out */
if (is_shared_micin(ac97))
@@ -2067,9 +2072,13 @@
static int patch_ad1888_specific(struct snd_ac97 *ac97)
{
- /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
- snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
- snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+ if (!ac97->spec.ad18xx.lo_as_master) {
+ /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+ "Master Surround Playback");
+ snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+ "Master Playback");
+ }
return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
}
@@ -2088,16 +2097,27 @@
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1888_build_ops;
- /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
- /* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+ /*
+ * LO can be used as a real line-out on some devices,
+ * and we need to revert the front/surround mixer switches
+ */
+ if (ac97->subsystem_vendor == 0x1043 &&
+ ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+ ac97->spec.ad18xx.lo_as_master = 1;
+
+ misc = snd_ac97_read(ac97, AC97_AD_MISC);
/* AD-compatible mode */
/* Stereo mutes enabled */
- misc = snd_ac97_read(ac97, AC97_AD_MISC);
- snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
- AC97_AD198X_LOSEL |
- AC97_AD198X_HPSEL |
- AC97_AD198X_MSPLT |
- AC97_AD198X_AC97NC);
+ misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+ if (!ac97->spec.ad18xx.lo_as_master)
+ /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+ /* it seems that most vendors connect line-out connector to
+ * headphone out of AC'97
+ */
+ misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+ snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
ac97->flags |= AC97_STEREO_MUTES;
return 0;
}
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index e0a605a..a99e86d 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -2858,6 +2858,7 @@
static struct snd_pci_quirk ad1988_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG),
SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG),
+ SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG),
{}
};
@@ -3643,33 +3644,17 @@
{ } /* end */
};
-static struct hda_input_mux ad1884a_mobile_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 }, /* port-C */
- { "Mix", 0x3 },
- },
-};
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
@@ -3686,14 +3671,31 @@
present ? 0x00 : 0x02);
}
+/* switch to external mic if plugged */
+static void ad1884a_hp_automic(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
+ present ? 0 : 1);
+}
+
#define AD1884A_HP_EVENT 0x37
+#define AD1884A_MIC_EVENT 0x36
/* unsolicited event for HP jack sensing */
static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res)
{
- if ((res >> 26) != AD1884A_HP_EVENT)
- return;
- ad1884a_hp_automute(codec);
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_hp_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_hp_automic(codec);
+ break;
+ }
}
/* initialize jack-sensing, too */
@@ -3701,6 +3703,7 @@
{
ad198x_init(codec);
ad1884a_hp_automute(codec);
+ ad1884a_hp_automic(codec);
return 0;
}
@@ -3714,10 +3717,15 @@
/* Port-F pin */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Port-C pin - internal mic-in */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
{ } /* end */
};
@@ -3877,7 +3885,6 @@
spec->mixers[0] = ad1884a_mobile_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_mobile_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
break;
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index c73ce07..6ef57fb 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -611,6 +611,7 @@
static struct snd_pci_quirk cmi9880_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG),
+ SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL),
SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG),
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6d4df45..518b7ca 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -853,6 +853,7 @@
case 0x10ec0269:
case 0x10ec0862:
case 0x10ec0662:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x14, 0,
AC_VERB_SET_EAPD_BTLENABLE, 2);
snd_hda_codec_write(codec, 0x15, 0,
@@ -877,6 +878,7 @@
case 0x10ec0883:
case 0x10ec0885:
case 0x10ec0888:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0,
@@ -940,7 +942,6 @@
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_HP_EVENT);
spec->unsol_event = alc_sku_unsol_event;
- spec->init_hook = alc_sku_automute;
}
/*
@@ -2981,7 +2982,7 @@
/* SND_PCI_QUIRK(0x1043, 0x1964, "ASUS", ALC880_ASUS_DIG), */
SND_PCI_QUIRK(0x1043, 0x1973, "ASUS", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS", ALC880_ASUS_DIG),
- SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_ASUS),
+ SND_PCI_QUIRK(0x1043, 0x814e, "ASUS P5GD1 w/SPDIF", ALC880_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
@@ -7743,6 +7744,7 @@
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
@@ -8757,35 +8759,39 @@
},
};
-/* mute/unmute internal speaker according to the hp jack and mute state */
+/* mute/unmute internal speaker according to the hp jacks and mute state */
static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
{
struct alc_spec *spec = codec->spec;
unsigned int mute;
if (force || !spec->sense_updated) {
- unsigned int present_int_hp, present_dock_hp;
+ unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_int_hp = snd_hda_codec_read(codec, 0x14, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- snd_hda_codec_read(codec, 0x1B, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_dock_hp = snd_hda_codec_read(codec, 0x1b, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- spec->jack_present = (present_int_hp & 0x80000000) != 0;
- spec->jack_present |= (present_dock_hp & 0x80000000) != 0;
+ /* check laptop HP jack */
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ /* need to execute and sync at first */
+ snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
+ /* check docking HP jack */
+ present |= snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ if (present & AC_PINSENSE_PRESENCE)
+ spec->jack_present = 1;
+ else
+ spec->jack_present = 0;
spec->sense_updated = 1;
}
- if (spec->jack_present) {
- /* mute internal speaker */
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, HDA_AMP_MUTE);
- } else {
- /* unmute internal speaker if necessary */
+ /* unmute internal speaker only if both HPs are unplugged and
+ * master switch is on
+ */
+ if (spec->jack_present)
+ mute = HDA_AMP_MUTE;
+ else
mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, mute);
- }
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, mute);
}
/* unsolicited event for HP jack sensing */
@@ -8797,6 +8803,11 @@
alc262_fujitsu_automute(codec, 1);
}
+static void alc262_fujitsu_init_hook(struct hda_codec *codec)
+{
+ alc262_fujitsu_automute(codec, 1);
+}
+
/* bind volumes of both NID 0x0c and 0x0d */
static struct hda_bind_ctls alc262_fujitsu_bind_master_vol = {
.ops = &snd_hda_bind_vol,
@@ -9570,6 +9581,7 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_fujitsu_capture_source,
.unsol_event = alc262_fujitsu_unsol_event,
+ .init_hook = alc262_fujitsu_init_hook,
},
[ALC262_HP_BPC] = {
.mixers = { alc262_HP_BPC_mixer },
@@ -10500,6 +10512,7 @@
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 393f7fd..a4f44a0 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -840,7 +840,7 @@
static struct snd_kcontrol_new stac925x_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
{ } /* end */
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 52b1d81..e7e4352 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -447,6 +447,23 @@
},
};
+static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 8,
+ .nid = 0x10, /* NID to query formats and rates */
+ /* We got noisy outputs on the right channel on VT1708 when
+ * 24bit samples are used. Until any workaround is found,
+ * disable the 24bit format, so far.
+ */
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .ops = {
+ .open = via_playback_pcm_open,
+ .prepare = via_playback_pcm_prepare,
+ .cleanup = via_playback_pcm_cleanup
+ },
+};
+
static struct hda_pcm_stream vt1708_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
@@ -899,6 +916,9 @@
spec->stream_name_analog = "VT1708 Analog";
spec->stream_analog_playback = &vt1708_pcm_analog_playback;
+ /* disable 32bit format on VT1708 */
+ if (codec->vendor_id == 0x11061708)
+ spec->stream_analog_playback = &vt1708_pcm_analog_s16_playback;
spec->stream_analog_capture = &vt1708_pcm_analog_capture;
spec->stream_name_digital = "VT1708 Digital";
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
index e97d8b2..a972f77 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -351,8 +351,8 @@
dev = caiaqdev(card);
dev->chip.dev = usb_dev;
dev->chip.card = card;
- dev->chip.usb_id = USB_ID(usb_dev->descriptor.idVendor,
- usb_dev->descriptor.idProduct);
+ dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&dev->spinlock);
snd_card_set_dev(card, &usb_dev->dev);
