| /* |
| * leon_pci.c: LEON Host PCI support |
| * |
| * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom |
| * |
| * Code is partially derived from pcic.c |
| */ |
| |
| #include <linux/of_device.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/export.h> |
| #include <asm/leon.h> |
| #include <asm/leon_pci.h> |
| |
| /* The LEON architecture does not rely on a BIOS or bootloader to setup |
| * PCI for us. The Linux generic routines are used to setup resources, |
| * reset values of configuration-space register settings are preserved. |
| * |
| * PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is |
| * accessed through a Window which is translated to low 64KB in PCI space, the |
| * first 4KB is not used so 60KB is available. |
| */ |
| void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info) |
| { |
| LIST_HEAD(resources); |
| struct pci_bus *root_bus; |
| |
| pci_add_resource_offset(&resources, &info->io_space, |
| info->io_space.start - 0x1000); |
| pci_add_resource(&resources, &info->mem_space); |
| |
| root_bus = pci_scan_root_bus(&ofdev->dev, 0, info->ops, info, |
| &resources); |
| if (root_bus) { |
| /* Setup IRQs of all devices using custom routines */ |
| pci_fixup_irqs(pci_common_swizzle, info->map_irq); |
| |
| /* Assign devices with resources */ |
| pci_assign_unassigned_resources(); |
| } else { |
| pci_free_resource_list(&resources); |
| } |
| } |
| |
| void __devinit pcibios_fixup_bus(struct pci_bus *pbus) |
| { |
| struct pci_dev *dev; |
| int i, has_io, has_mem; |
| u16 cmd; |
| |
| list_for_each_entry(dev, &pbus->devices, bus_list) { |
| /* |
| * We can not rely on that the bootloader has enabled I/O |
| * or memory access to PCI devices. Instead we enable it here |
| * if the device has BARs of respective type. |
| */ |
| has_io = has_mem = 0; |
| for (i = 0; i < PCI_ROM_RESOURCE; i++) { |
| unsigned long f = dev->resource[i].flags; |
| if (f & IORESOURCE_IO) |
| has_io = 1; |
| else if (f & IORESOURCE_MEM) |
| has_mem = 1; |
| } |
| /* ROM BARs are mapped into 32-bit memory space */ |
| if (dev->resource[PCI_ROM_RESOURCE].end != 0) { |
| dev->resource[PCI_ROM_RESOURCE].flags |= |
| IORESOURCE_ROM_ENABLE; |
| has_mem = 1; |
| } |
| pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd); |
| if (has_io && !(cmd & PCI_COMMAND_IO)) { |
| #ifdef CONFIG_PCI_DEBUG |
| printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n", |
| pci_name(dev)); |
| #endif |
| cmd |= PCI_COMMAND_IO; |
| pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, |
| cmd); |
| } |
| if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) { |
| #ifdef CONFIG_PCI_DEBUG |
| printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev" |
| "%s\n", pci_name(dev)); |
| #endif |
| cmd |= PCI_COMMAND_MEMORY; |
| pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND, |
| cmd); |
| } |
| } |
| } |
| |
| /* |
| * Other archs parse arguments here. |
| */ |
| char * __devinit pcibios_setup(char *str) |
| { |
| return str; |
| } |
| |
| resource_size_t pcibios_align_resource(void *data, const struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| return res->start; |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| return pci_enable_resources(dev, mask); |
| } |
| |
| void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) |
| { |
| #ifdef CONFIG_PCI_DEBUG |
| printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq, |
| pci_name(dev)); |
| #endif |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); |
| } |
| |
| /* in/out routines taken from pcic.c |
| * |
| * This probably belongs here rather than ioport.c because |
| * we do not want this crud linked into SBus kernels. |
| * Also, think for a moment about likes of floppy.c that |
| * include architecture specific parts. They may want to redefine ins/outs. |
| * |
| * We do not use horrible macros here because we want to |
| * advance pointer by sizeof(size). |
| */ |
| void outsb(unsigned long addr, const void *src, unsigned long count) |
| { |
| while (count) { |
| count -= 1; |
| outb(*(const char *)src, addr); |
| src += 1; |
| /* addr += 1; */ |
| } |
| } |
| EXPORT_SYMBOL(outsb); |
| |
| void outsw(unsigned long addr, const void *src, unsigned long count) |
| { |
| while (count) { |
| count -= 2; |
| outw(*(const short *)src, addr); |
| src += 2; |
| /* addr += 2; */ |
| } |
| } |
| EXPORT_SYMBOL(outsw); |
| |
| void outsl(unsigned long addr, const void *src, unsigned long count) |
| { |
| while (count) { |
| count -= 4; |
| outl(*(const long *)src, addr); |
| src += 4; |
| /* addr += 4; */ |
| } |
| } |
| EXPORT_SYMBOL(outsl); |
| |
| void insb(unsigned long addr, void *dst, unsigned long count) |
| { |
| while (count) { |
| count -= 1; |
| *(unsigned char *)dst = inb(addr); |
| dst += 1; |
| /* addr += 1; */ |
| } |
| } |
| EXPORT_SYMBOL(insb); |
| |
| void insw(unsigned long addr, void *dst, unsigned long count) |
| { |
| while (count) { |
| count -= 2; |
| *(unsigned short *)dst = inw(addr); |
| dst += 2; |
| /* addr += 2; */ |
| } |
| } |
| EXPORT_SYMBOL(insw); |
| |
| void insl(unsigned long addr, void *dst, unsigned long count) |
| { |
| while (count) { |
| count -= 4; |
| /* |
| * XXX I am sure we are in for an unaligned trap here. |
| */ |
| *(unsigned long *)dst = inl(addr); |
| dst += 4; |
| /* addr += 4; */ |
| } |
| } |
| EXPORT_SYMBOL(insl); |