arch/powerpc/kernel/vector.S - maze/linux - Git at Google

 #include <asm/processor.h>
 #include <asm/ppc_asm.h>
 #include <asm/reg.h>
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>

 /*
  * load_up_altivec(unused, unused, tsk)
  * Disable VMX for the task which had it previously,
  * and save its vector registers in its thread_struct.
  * Enables the VMX for use in the kernel on return.
  * On SMP we know the VMX is free, since we give it up every
  * switch (ie, no lazy save of the vector registers).
  */
 _GLOBAL(load_up_altivec)
 	mfmsr	r5			/* grab the current MSR */
 	oris	r5,r5,MSR_VEC@h
 	MTMSRD(r5)			/* enable use of AltiVec now */
 	isync

 /*
  * For SMP, we don't do lazy VMX switching because it just gets too
  * horrendously complex, especially when a task switches from one CPU
  * to another.  Instead we call giveup_altvec in switch_to.
  * VRSAVE isn't dealt with here, that is done in the normal context
  * switch code. Note that we could rely on vrsave value to eventually
  * avoid saving all of the VREGs here...
  */
 #ifndef CONFIG_SMP
 	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
 	toreal(r3)
 	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
 	PPC_LCMPI	0,r4,0
 	beq	1f

 	/* Save VMX state to last_task_used_altivec's THREAD struct */
 	toreal(r4)
 	addi	r4,r4,THREAD
 	SAVE_32VRS(0,r5,r4)
 	mfvscr	vr0
 	li	r10,THREAD_VSCR
 	stvx	vr0,r10,r4
 	/* Disable VMX for last_task_used_altivec */
 	PPC_LL	r5,PT_REGS(r4)
 	toreal(r5)
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	lis	r10,MSR_VEC@h
 	andc	r4,r4,r10
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #endif /* CONFIG_SMP */

 	/* Hack: if we get an altivec unavailable trap with VRSAVE
 	 * set to all zeros, we assume this is a broken application
 	 * that fails to set it properly, and thus we switch it to
 	 * all 1's
 	 */
 	mfspr	r4,SPRN_VRSAVE
 	cmpwi	0,r4,0
 	bne+	1f
 	li	r4,-1
 	mtspr	SPRN_VRSAVE,r4
 1:
 	/* enable use of VMX after return */
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	oris	r9,r9,MSR_VEC@h
 #else
 	ld	r4,PACACURRENT(r13)
 	addi	r5,r4,THREAD		/* Get THREAD */
 	oris	r12,r12,MSR_VEC@h
 	std	r12,_MSR(r1)
 #endif
 	li	r4,1
 	li	r10,THREAD_VSCR
 	stw	r4,THREAD_USED_VR(r5)
 	lvx	vr0,r10,r5
 	mtvscr	vr0
 	REST_32VRS(0,r4,r5)
 #ifndef CONFIG_SMP
 	/* Update last_task_used_altivec to 'current' */
 	subi	r4,r5,THREAD		/* Back to 'current' */
 	fromreal(r4)
 	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr

 _GLOBAL(giveup_altivec_notask)
 	mfmsr	r3
 	andis.	r4,r3,MSR_VEC@h
 	bnelr				/* Already enabled? */
 	oris	r3,r3,MSR_VEC@h
 	SYNC
 	MTMSRD(r3)			/* enable use of VMX now */
 	isync
 	blr

 /*
  * giveup_altivec(tsk)
  * Disable VMX for the task given as the argument,
  * and save the vector registers in its thread_struct.
  * Enables the VMX for use in the kernel on return.
  */
 _GLOBAL(giveup_altivec)
 	mfmsr	r5
 	oris	r5,r5,MSR_VEC@h
 	SYNC
 	MTMSRD(r5)			/* enable use of VMX now */
 	isync
 	PPC_LCMPI	0,r3,0
 	beqlr				/* if no previous owner, done */
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
 	SAVE_32VRS(0,r4,r3)
 	mfvscr	vr0
 	li	r4,THREAD_VSCR
 	stvx	vr0,r4,r3
 	beq	1f
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 #ifdef CONFIG_VSX
 BEGIN_FTR_SECTION
 	lis	r3,(MSR_VEC|MSR_VSX)@h
 FTR_SECTION_ELSE
 	lis	r3,MSR_VEC@h
 ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
 #else
 	lis	r3,MSR_VEC@h
 #endif
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #ifndef CONFIG_SMP
 	li	r5,0
 	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
 	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
 #endif /* CONFIG_SMP */
 	blr

 #ifdef CONFIG_VSX

 #ifdef CONFIG_PPC32
 #error This asm code isn't ready for 32-bit kernels
 #endif

 /*
  * load_up_vsx(unused, unused, tsk)
  * Disable VSX for the task which had it previously,
  * and save its vector registers in its thread_struct.
  * Reuse the fp and vsx saves, but first check to see if they have
  * been saved already.
  */
 _GLOBAL(load_up_vsx)
 /* Load FP and VSX registers if they haven't been done yet */
 	andi.	r5,r12,MSR_FP
 	beql+	load_up_fpu		/* skip if already loaded */
 	andis.	r5,r12,MSR_VEC@h
 	beql+	load_up_altivec		/* skip if already loaded */

 #ifndef CONFIG_SMP
 	ld	r3,last_task_used_vsx@got(r2)
 	ld	r4,0(r3)
 	cmpdi	0,r4,0
 	beq	1f
 	/* Disable VSX for last_task_used_vsx */
 	addi	r4,r4,THREAD
 	ld	r5,PT_REGS(r4)
 	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	lis	r6,MSR_VSX@h
 	andc	r6,r4,r6
 	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #endif /* CONFIG_SMP */
 	ld	r4,PACACURRENT(r13)
 	addi	r4,r4,THREAD		/* Get THREAD */
 	li	r6,1
 	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
 #ifndef CONFIG_SMP
 	/* Update last_task_used_vsx to 'current' */
 	ld	r4,PACACURRENT(r13)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
 	b	fast_exception_return

 /*
  * __giveup_vsx(tsk)
  * Disable VSX for the task given as the argument.
  * Does NOT save vsx registers.
  * Enables the VSX for use in the kernel on return.
  */
 _GLOBAL(__giveup_vsx)
 	mfmsr	r5
 	oris	r5,r5,MSR_VSX@h
 	mtmsrd	r5			/* enable use of VSX now */
 	isync

 	cmpdi	0,r3,0
 	beqlr-				/* if no previous owner, done */
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	ld	r5,PT_REGS(r3)
 	cmpdi	0,r5,0
 	beq	1f
 	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	lis	r3,MSR_VSX@h
 	andc	r4,r4,r3		/* disable VSX for previous task */
 	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
 #ifndef CONFIG_SMP
 	li	r5,0
 	ld	r4,last_task_used_vsx@got(r2)
 	std	r5,0(r4)
 #endif /* CONFIG_SMP */
 	blr

 #endif /* CONFIG_VSX */


 /*
  * The routines below are in assembler so we can closely control the
  * usage of floating-point registers.  These routines must be called
  * with preempt disabled.
  */
 #ifdef CONFIG_PPC32
 	.data
 fpzero:
 	.long	0
 fpone:
 	.long	0x3f800000	/* 1.0 in single-precision FP */
 fphalf:
 	.long	0x3f000000	/* 0.5 in single-precision FP */

 #define LDCONST(fr, name)	\
 	lis	r11,name@ha;	\
 	lfs	fr,name@l(r11)
 #else

 	.section ".toc","aw"
 fpzero:
 	.tc	FD_0_0[TC],0
 fpone:
 	.tc	FD_3ff00000_0[TC],0x3ff0000000000000	/* 1.0 */
 fphalf:
 	.tc	FD_3fe00000_0[TC],0x3fe0000000000000	/* 0.5 */

 #define LDCONST(fr, name)	\
 	lfd	fr,name@toc(r2)
 #endif

 	.text
 /*
  * Internal routine to enable floating point and set FPSCR to 0.
  * Don't call it from C; it doesn't use the normal calling convention.
  */
 fpenable:
 #ifdef CONFIG_PPC32
 	stwu	r1,-64(r1)
 #else
 	stdu	r1,-64(r1)
 #endif
 	mfmsr	r10
 	ori	r11,r10,MSR_FP
 	mtmsr	r11
 	isync
 	stfd	fr0,24(r1)
 	stfd	fr1,16(r1)
 	stfd	fr31,8(r1)
 	LDCONST(fr1, fpzero)
 	mffs	fr31
 	MTFSF_L(fr1)
 	blr

 fpdisable:
 	mtlr	r12
 	MTFSF_L(fr31)
 	lfd	fr31,8(r1)
 	lfd	fr1,16(r1)
 	lfd	fr0,24(r1)
 	mtmsr	r10
 	isync
 	addi	r1,r1,64
 	blr

 /*
  * Vector add, floating point.
  */
 _GLOBAL(vaddfp)
 	mflr	r12
 	bl	fpenable
 	li	r0,4
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
 	lfsx	fr1,r5,r6
 	fadds	fr0,fr0,fr1
 	stfsx	fr0,r3,r6
 	addi	r6,r6,4
 	bdnz	1b
 	b	fpdisable

 /*
  * Vector subtract, floating point.
  */
 _GLOBAL(vsubfp)
 	mflr	r12
 	bl	fpenable
 	li	r0,4
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
 	lfsx	fr1,r5,r6
 	fsubs	fr0,fr0,fr1
 	stfsx	fr0,r3,r6
 	addi	r6,r6,4
 	bdnz	1b
 	b	fpdisable

 /*
  * Vector multiply and add, floating point.
  */
 _GLOBAL(vmaddfp)
 	mflr	r12
 	bl	fpenable
 	stfd	fr2,32(r1)
 	li	r0,4
 	mtctr	r0
 	li	r7,0
 1:	lfsx	fr0,r4,r7
 	lfsx	fr1,r5,r7
 	lfsx	fr2,r6,r7
 	fmadds	fr0,fr0,fr2,fr1
 	stfsx	fr0,r3,r7
 	addi	r7,r7,4
 	bdnz	1b
 	lfd	fr2,32(r1)
 	b	fpdisable

 /*
  * Vector negative multiply and subtract, floating point.
  */
 _GLOBAL(vnmsubfp)
 	mflr	r12
 	bl	fpenable
 	stfd	fr2,32(r1)
 	li	r0,4
 	mtctr	r0
 	li	r7,0
 1:	lfsx	fr0,r4,r7
 	lfsx	fr1,r5,r7
 	lfsx	fr2,r6,r7
 	fnmsubs	fr0,fr0,fr2,fr1
 	stfsx	fr0,r3,r7
 	addi	r7,r7,4
 	bdnz	1b
 	lfd	fr2,32(r1)
 	b	fpdisable

 /*
  * Vector reciprocal estimate.  We just compute 1.0/x.
  * r3 -> destination, r4 -> source.
  */
 _GLOBAL(vrefp)
 	mflr	r12
 	bl	fpenable
 	li	r0,4
 	LDCONST(fr1, fpone)
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
 	fdivs	fr0,fr1,fr0
 	stfsx	fr0,r3,r6
 	addi	r6,r6,4
 	bdnz	1b
 	b	fpdisable

 /*
  * Vector reciprocal square-root estimate, floating point.
  * We use the frsqrte instruction for the initial estimate followed
  * by 2 iterations of Newton-Raphson to get sufficient accuracy.
  * r3 -> destination, r4 -> source.
  */
 _GLOBAL(vrsqrtefp)
 	mflr	r12
 	bl	fpenable
 	stfd	fr2,32(r1)
 	stfd	fr3,40(r1)
 	stfd	fr4,48(r1)
 	stfd	fr5,56(r1)
 	li	r0,4
 	LDCONST(fr4, fpone)
 	LDCONST(fr5, fphalf)
 	mtctr	r0
 	li	r6,0
 1:	lfsx	fr0,r4,r6
 	frsqrte	fr1,fr0		/* r = frsqrte(s) */
 	fmuls	fr3,fr1,fr0	/* r * s */
 	fmuls	fr2,fr1,fr5	/* r * 0.5 */
 	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
 	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
 	fmuls	fr3,fr1,fr0	/* r * s */
 	fmuls	fr2,fr1,fr5	/* r * 0.5 */
 	fnmsubs	fr3,fr1,fr3,fr4	/* 1 - s * r * r */
 	fmadds	fr1,fr2,fr3,fr1	/* r = r + 0.5 * r * (1 - s * r * r) */
 	stfsx	fr1,r3,r6
 	addi	r6,r6,4
 	bdnz	1b
 	lfd	fr5,56(r1)
 	lfd	fr4,48(r1)
 	lfd	fr3,40(r1)
 	lfd	fr2,32(r1)
 	b	fpdisable
	#include <asm/processor.h>
	#include <asm/ppc_asm.h>
	#include <asm/reg.h>
	#include <asm/asm-offsets.h>
	#include <asm/cputable.h>
	#include <asm/thread_info.h>
	#include <asm/page.h>
	#include <asm/ptrace.h>

	/*
	* load_up_altivec(unused, unused, tsk)
	* Disable VMX for the task which had it previously,
	* and save its vector registers in its thread_struct.
	* Enables the VMX for use in the kernel on return.
	* On SMP we know the VMX is free, since we give it up every
	* switch (ie, no lazy save of the vector registers).
	*/
	_GLOBAL(load_up_altivec)
	mfmsr r5 /* grab the current MSR */
	oris r5,r5,MSR_VEC@h
	MTMSRD(r5) /* enable use of AltiVec now */
	isync

	/*
	* For SMP, we don't do lazy VMX switching because it just gets too
	* horrendously complex, especially when a task switches from one CPU
	* to another. Instead we call giveup_altvec in switch_to.
	* VRSAVE isn't dealt with here, that is done in the normal context
	* switch code. Note that we could rely on vrsave value to eventually
	* avoid saving all of the VREGs here...
	*/
	#ifndef CONFIG_SMP
	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
	toreal(r3)
	PPC_LL r4,ADDROFF(last_task_used_altivec)(r3)
	PPC_LCMPI 0,r4,0
	beq 1f

	/* Save VMX state to last_task_used_altivec's THREAD struct */
	toreal(r4)
	addi r4,r4,THREAD
	SAVE_32VRS(0,r5,r4)
	mfvscr vr0
	li r10,THREAD_VSCR
	stvx vr0,r10,r4
	/* Disable VMX for last_task_used_altivec */
	PPC_LL r5,PT_REGS(r4)
	toreal(r5)
	PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	lis r10,MSR_VEC@h
	andc r4,r4,r10
	PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	1:
	#endif /* CONFIG_SMP */

	/* Hack: if we get an altivec unavailable trap with VRSAVE
	* set to all zeros, we assume this is a broken application
	* that fails to set it properly, and thus we switch it to
	* all 1's
	*/
	mfspr r4,SPRN_VRSAVE
	cmpwi 0,r4,0
	bne+ 1f
	li r4,-1
	mtspr SPRN_VRSAVE,r4
	1:
	/* enable use of VMX after return */
	#ifdef CONFIG_PPC32
	mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */
	oris r9,r9,MSR_VEC@h
	#else
	ld r4,PACACURRENT(r13)
	addi r5,r4,THREAD /* Get THREAD */
	oris r12,r12,MSR_VEC@h
	std r12,_MSR(r1)
	#endif
	li r4,1
	li r10,THREAD_VSCR
	stw r4,THREAD_USED_VR(r5)
	lvx vr0,r10,r5
	mtvscr vr0
	REST_32VRS(0,r4,r5)
	#ifndef CONFIG_SMP
	/* Update last_task_used_altivec to 'current' */
	subi r4,r5,THREAD /* Back to 'current' */
	fromreal(r4)
	PPC_STL r4,ADDROFF(last_task_used_altivec)(r3)
	#endif /* CONFIG_SMP */
	/* restore registers and return */
	blr

	_GLOBAL(giveup_altivec_notask)
	mfmsr r3
	andis. r4,r3,MSR_VEC@h
	bnelr /* Already enabled? */
	oris r3,r3,MSR_VEC@h
	SYNC
	MTMSRD(r3) /* enable use of VMX now */
	isync
	blr

	/*
	* giveup_altivec(tsk)
	* Disable VMX for the task given as the argument,
	* and save the vector registers in its thread_struct.
	* Enables the VMX for use in the kernel on return.
	*/
	_GLOBAL(giveup_altivec)
	mfmsr r5
	oris r5,r5,MSR_VEC@h
	SYNC
	MTMSRD(r5) /* enable use of VMX now */
	isync
	PPC_LCMPI 0,r3,0
	beqlr /* if no previous owner, done */
	addi r3,r3,THREAD /* want THREAD of task */
	PPC_LL r5,PT_REGS(r3)
	PPC_LCMPI 0,r5,0
	SAVE_32VRS(0,r4,r3)
	mfvscr vr0
	li r4,THREAD_VSCR
	stvx vr0,r4,r3
	beq 1f
	PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	#ifdef CONFIG_VSX
	BEGIN_FTR_SECTION
	lis r3,(MSR_VEC\|MSR_VSX)@h
	FTR_SECTION_ELSE
	lis r3,MSR_VEC@h
	ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
	#else
	lis r3,MSR_VEC@h
	#endif
	andc r4,r4,r3 /* disable FP for previous task */
	PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	1:
	#ifndef CONFIG_SMP
	li r5,0
	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
	PPC_STL r5,ADDROFF(last_task_used_altivec)(r4)
	#endif /* CONFIG_SMP */
	blr

	#ifdef CONFIG_VSX

	#ifdef CONFIG_PPC32
	#error This asm code isn't ready for 32-bit kernels
	#endif

	/*
	* load_up_vsx(unused, unused, tsk)
	* Disable VSX for the task which had it previously,
	* and save its vector registers in its thread_struct.
	* Reuse the fp and vsx saves, but first check to see if they have
	* been saved already.
	*/
	_GLOBAL(load_up_vsx)
	/* Load FP and VSX registers if they haven't been done yet */
	andi. r5,r12,MSR_FP
	beql+ load_up_fpu /* skip if already loaded */
	andis. r5,r12,MSR_VEC@h
	beql+ load_up_altivec /* skip if already loaded */

	#ifndef CONFIG_SMP
	ld r3,last_task_used_vsx@got(r2)
	ld r4,0(r3)
	cmpdi 0,r4,0
	beq 1f
	/* Disable VSX for last_task_used_vsx */
	addi r4,r4,THREAD
	ld r5,PT_REGS(r4)
	ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	lis r6,MSR_VSX@h
	andc r6,r4,r6
	std r6,_MSR-STACK_FRAME_OVERHEAD(r5)
	1:
	#endif /* CONFIG_SMP */
	ld r4,PACACURRENT(r13)
	addi r4,r4,THREAD /* Get THREAD */
	li r6,1
	stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
	/* enable use of VSX after return */
	oris r12,r12,MSR_VSX@h
	std r12,_MSR(r1)
	#ifndef CONFIG_SMP
	/* Update last_task_used_vsx to 'current' */
	ld r4,PACACURRENT(r13)
	std r4,0(r3)
	#endif /* CONFIG_SMP */
	b fast_exception_return

	/*
	* __giveup_vsx(tsk)
	* Disable VSX for the task given as the argument.
	* Does NOT save vsx registers.
	* Enables the VSX for use in the kernel on return.
	*/
	_GLOBAL(__giveup_vsx)
	mfmsr r5
	oris r5,r5,MSR_VSX@h
	mtmsrd r5 /* enable use of VSX now */
	isync

	cmpdi 0,r3,0
	beqlr- /* if no previous owner, done */
	addi r3,r3,THREAD /* want THREAD of task */
	ld r5,PT_REGS(r3)
	cmpdi 0,r5,0
	beq 1f
	ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	lis r3,MSR_VSX@h
	andc r4,r4,r3 /* disable VSX for previous task */
	std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
	1:
	#ifndef CONFIG_SMP
	li r5,0
	ld r4,last_task_used_vsx@got(r2)
	std r5,0(r4)
	#endif /* CONFIG_SMP */
	blr

	#endif /* CONFIG_VSX */


	/*
	* The routines below are in assembler so we can closely control the
	* usage of floating-point registers. These routines must be called
	* with preempt disabled.
	*/
	#ifdef CONFIG_PPC32
	.data
	fpzero:
	.long 0
	fpone:
	.long 0x3f800000 /* 1.0 in single-precision FP */
	fphalf:
	.long 0x3f000000 /* 0.5 in single-precision FP */

	#define LDCONST(fr, name) \
	lis r11,name@ha; \
	lfs fr,name@l(r11)
	#else

	.section ".toc","aw"
	fpzero:
	.tc FD_0_0[TC],0
	fpone:
	.tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */
	fphalf:
	.tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */

	#define LDCONST(fr, name) \
	lfd fr,name@toc(r2)
	#endif

	.text
	/*
	* Internal routine to enable floating point and set FPSCR to 0.
	* Don't call it from C; it doesn't use the normal calling convention.
	*/
	fpenable:
	#ifdef CONFIG_PPC32
	stwu r1,-64(r1)
	#else
	stdu r1,-64(r1)
	#endif
	mfmsr r10
	ori r11,r10,MSR_FP
	mtmsr r11
	isync
	stfd fr0,24(r1)
	stfd fr1,16(r1)
	stfd fr31,8(r1)
	LDCONST(fr1, fpzero)
	mffs fr31
	MTFSF_L(fr1)
	blr

	fpdisable:
	mtlr r12
	MTFSF_L(fr31)
	lfd fr31,8(r1)
	lfd fr1,16(r1)
	lfd fr0,24(r1)
	mtmsr r10
	isync
	addi r1,r1,64
	blr

	/*
	* Vector add, floating point.
	*/
	_GLOBAL(vaddfp)
	mflr r12
	bl fpenable
	li r0,4
	mtctr r0
	li r6,0
	1: lfsx fr0,r4,r6
	lfsx fr1,r5,r6
	fadds fr0,fr0,fr1
	stfsx fr0,r3,r6
	addi r6,r6,4
	bdnz 1b
	b fpdisable

	/*
	* Vector subtract, floating point.
	*/
	_GLOBAL(vsubfp)
	mflr r12
	bl fpenable
	li r0,4
	mtctr r0
	li r6,0
	1: lfsx fr0,r4,r6
	lfsx fr1,r5,r6
	fsubs fr0,fr0,fr1
	stfsx fr0,r3,r6
	addi r6,r6,4
	bdnz 1b
	b fpdisable

	/*
	* Vector multiply and add, floating point.
	*/
	_GLOBAL(vmaddfp)
	mflr r12
	bl fpenable
	stfd fr2,32(r1)
	li r0,4
	mtctr r0
	li r7,0
	1: lfsx fr0,r4,r7
	lfsx fr1,r5,r7
	lfsx fr2,r6,r7
	fmadds fr0,fr0,fr2,fr1
	stfsx fr0,r3,r7
	addi r7,r7,4
	bdnz 1b
	lfd fr2,32(r1)
	b fpdisable

	/*
	* Vector negative multiply and subtract, floating point.
	*/
	_GLOBAL(vnmsubfp)
	mflr r12
	bl fpenable
	stfd fr2,32(r1)
	li r0,4
	mtctr r0
	li r7,0
	1: lfsx fr0,r4,r7
	lfsx fr1,r5,r7
	lfsx fr2,r6,r7
	fnmsubs fr0,fr0,fr2,fr1
	stfsx fr0,r3,r7
	addi r7,r7,4
	bdnz 1b
	lfd fr2,32(r1)
	b fpdisable

	/*
	* Vector reciprocal estimate. We just compute 1.0/x.
	* r3 -> destination, r4 -> source.
	*/
	_GLOBAL(vrefp)
	mflr r12
	bl fpenable
	li r0,4
	LDCONST(fr1, fpone)
	mtctr r0
	li r6,0
	1: lfsx fr0,r4,r6
	fdivs fr0,fr1,fr0
	stfsx fr0,r3,r6
	addi r6,r6,4
	bdnz 1b
	b fpdisable

	/*
	* Vector reciprocal square-root estimate, floating point.
	* We use the frsqrte instruction for the initial estimate followed
	* by 2 iterations of Newton-Raphson to get sufficient accuracy.
	* r3 -> destination, r4 -> source.
	*/
	_GLOBAL(vrsqrtefp)
	mflr r12
	bl fpenable
	stfd fr2,32(r1)
	stfd fr3,40(r1)
	stfd fr4,48(r1)
	stfd fr5,56(r1)
	li r0,4
	LDCONST(fr4, fpone)
	LDCONST(fr5, fphalf)
	mtctr r0
	li r6,0
	1: lfsx fr0,r4,r6
	frsqrte fr1,fr0 /* r = frsqrte(s) */
	fmuls fr3,fr1,fr0 /* r * s */
	fmuls fr2,fr1,fr5 /* r * 0.5 */
	fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
	fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
	fmuls fr3,fr1,fr0 /* r * s */
	fmuls fr2,fr1,fr5 /* r * 0.5 */
	fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
	fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
	stfsx fr1,r3,r6
	addi r6,r6,4
	bdnz 1b
	lfd fr5,56(r1)
	lfd fr4,48(r1)
	lfd fr3,40(r1)
	lfd fr2,32(r1)
	b fpdisable