drivers/net/wireless/iwmc3200wifi/fw.c - maze/linux - Git at Google

 /*
  * Intel Wireless Multicomm 3200 WiFi driver
  *
  * Copyright (C) 2009 Intel Corporation. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *   * Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *   * Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in
  *     the documentation and/or other materials provided with the
  *     distribution.
  *   * Neither the name of Intel Corporation nor the names of its
  *     contributors may be used to endorse or promote products derived
  *     from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *
  * Intel Corporation <ilw@linux.intel.com>
  * Samuel Ortiz <samuel.ortiz@intel.com>
  * Zhu Yi <yi.zhu@intel.com>
  *
  */

 #include <linux/kernel.h>
 #include <linux/firmware.h>

 #include "iwm.h"
 #include "bus.h"
 #include "hal.h"
 #include "umac.h"
 #include "debug.h"
 #include "fw.h"
 #include "commands.h"

 static const char fw_barker[] = "*WESTOPFORNOONE*";

 /*
  * @op_code: Op code we're looking for.
  * @index: There can be several instances of the same opcode within
  *         the firmware. Index specifies which one we're looking for.
  */
 static int iwm_fw_op_offset(struct iwm_priv *iwm, const struct firmware *fw,
 			    u16 op_code, u32 index)
 {
 	int offset = -EINVAL, fw_offset;
 	u32 op_index = 0;
 	const u8 *fw_ptr;
 	struct iwm_fw_hdr_rec *rec;

 	fw_offset = 0;
 	fw_ptr = fw->data;

 	/* We first need to look for the firmware barker */
 	if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) {
 		IWM_ERR(iwm, "No barker string in this FW\n");
 		return -EINVAL;
 	}

 	if (fw->size < IWM_HDR_LEN) {
 		IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size);
 		return -EINVAL;
 	}

 	fw_offset += IWM_HDR_BARKER_LEN;

 	while (fw_offset < fw->size) {
 		rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset);

 		IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n",
 			   rec->op_code, rec->len, fw_offset);

 		if (rec->op_code == IWM_HDR_REC_OP_INVALID) {
 			IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n");
 			break;
 		}

 		if (rec->op_code == op_code) {
 			if (op_index == index) {
 				fw_offset += sizeof(struct iwm_fw_hdr_rec);
 				offset = fw_offset;
 				goto out;
 			}
 			op_index++;
 		}

 		fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len;
 	}

  out:
 	return offset;
 }

 static int iwm_load_firmware_chunk(struct iwm_priv *iwm,
 				   const struct firmware *fw,
 				   struct iwm_fw_img_desc *img_desc)
 {
 	struct iwm_udma_nonwifi_cmd target_cmd;
 	u32 chunk_size;
 	const u8 *chunk_ptr;
 	int ret = 0;

 	IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n",
 		   img_desc->length, img_desc->address);

 	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
 	target_cmd.handle_by_hw = 1;
 	target_cmd.op2 = 0;
 	target_cmd.resp = 0;
 	target_cmd.eop = 1;

 	chunk_size = img_desc->length;
 	chunk_ptr = fw->data + img_desc->offset;

 	while (chunk_size > 0) {
 		u32 tmp_chunk_size;

 		tmp_chunk_size = min_t(u32, chunk_size,
 				       IWM_MAX_NONWIFI_CMD_BUFF_SIZE);

 		target_cmd.addr = cpu_to_le32(img_desc->address +
 				    (chunk_ptr - fw->data - img_desc->offset));
 		target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size);

 		IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n",
 			   tmp_chunk_size, target_cmd.addr);

 		ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr);
 		if (ret < 0) {
 			IWM_ERR(iwm, "Couldn't load FW chunk\n");
 			break;
 		}

 		chunk_size -= tmp_chunk_size;
 		chunk_ptr += tmp_chunk_size;
 	}

 	return ret;
 }
 /*
  * To load a fw image to the target, we basically go through the
  * fw, looking for OP_MEM_DESC records. Once we found one, we
  * pass it to iwm_load_firmware_chunk().
  * The OP_MEM_DESC records contain the actuall memory chunk to be
  * sent, but also the destination address.
  */
 static int iwm_load_img(struct iwm_priv *iwm, const char *img_name)
 {
 	const struct firmware *fw;
 	struct iwm_fw_img_desc *img_desc;
 	struct iwm_fw_img_ver *ver;
 	int ret = 0, fw_offset;
 	u32 opcode_idx = 0, build_date;
 	char *build_tag;

 	ret = request_firmware(&fw, img_name, iwm_to_dev(iwm));
 	if (ret) {
 		IWM_ERR(iwm, "Request firmware failed");
 		return ret;
 	}

 	IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name);

 	while (1) {
 		fw_offset = iwm_fw_op_offset(iwm, fw,
 					     IWM_HDR_REC_OP_MEM_DESC,
 					     opcode_idx);
 		if (fw_offset < 0)
 			break;

 		img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset);
 		ret = iwm_load_firmware_chunk(iwm, fw, img_desc);
 		if (ret < 0)
 			goto err_release_fw;
 		opcode_idx++;
 	};

 	/* Read firmware version */
 	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0);
 	if (fw_offset < 0)
 		goto err_release_fw;

 	ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset);

 	/* Read build tag */
 	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0);
 	if (fw_offset < 0)
 		goto err_release_fw;

 	build_tag = (char *)(fw->data + fw_offset);

 	/* Read build date */
 	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0);
 	if (fw_offset < 0)
 		goto err_release_fw;

 	build_date = *(u32 *)(fw->data + fw_offset);

 	IWM_INFO(iwm, "%s:\n", img_name);
 	IWM_INFO(iwm, "\tVersion:    %02X.%02X\n", ver->major, ver->minor);
 	IWM_INFO(iwm, "\tBuild tag:  %s\n", build_tag);
 	IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n",
 		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
 		 IWM_BUILD_DAY(build_date));

 	if (!strcmp(img_name, iwm->bus_ops->umac_name))
 		sprintf(iwm->umac_version, "%02X.%02X",
 			ver->major, ver->minor);

 	if (!strcmp(img_name, iwm->bus_ops->lmac_name))
 		sprintf(iwm->lmac_version, "%02X.%02X",
 			ver->major, ver->minor);

  err_release_fw:
 	release_firmware(fw);

 	return ret;
 }

 static int iwm_load_umac(struct iwm_priv *iwm)
 {
 	struct iwm_udma_nonwifi_cmd target_cmd;
 	int ret;

 	ret = iwm_load_img(iwm, iwm->bus_ops->umac_name);
 	if (ret < 0)
 		return ret;

 	/* We've loaded the UMAC, we can tell the target to jump there */
 	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP;
 	target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR);
 	target_cmd.op1_sz = 0;
 	target_cmd.op2 = 0;
 	target_cmd.handle_by_hw = 0;
 	target_cmd.resp = 1 ;
 	target_cmd.eop = 1;

 	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
 	if (ret < 0)
 		IWM_ERR(iwm, "Couldn't send JMP command\n");

 	return ret;
 }

 static int iwm_load_lmac(struct iwm_priv *iwm, const char *img_name)
 {
 	int ret;

 	ret = iwm_load_img(iwm, img_name);
 	if (ret < 0)
 		return ret;

 	return iwm_send_umac_reset(iwm,
 			cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
 }

 static int iwm_init_calib(struct iwm_priv *iwm, unsigned long cfg_bitmap,
 			  unsigned long expected_bitmap, u8 rx_iq_cmd)
 {
 	/* Read RX IQ calibration result from EEPROM */
 	if (test_bit(rx_iq_cmd, &cfg_bitmap)) {
 		iwm_store_rxiq_calib_result(iwm);
 		set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
 	}

 	iwm_send_prio_table(iwm);
 	iwm_send_init_calib_cfg(iwm, cfg_bitmap);

 	while (iwm->calib_done_map != expected_bitmap) {
 		if (iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
 				     IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT)) {
 			IWM_DBG_FW(iwm, DBG, "Initial calibration timeout\n");
 			return -ETIMEDOUT;
 		}

 		IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
 			   "0x%lx, expected calibrations: 0x%lx\n",
 			   iwm->calib_done_map, expected_bitmap);
 	}

 	return 0;
 }

 /*
  * We currently have to load 3 FWs:
  * 1) The UMAC (Upper MAC).
  * 2) The calibration LMAC (Lower MAC).
  *    We then send the calibration init command, so that the device can
  *    run a first calibration round.
  * 3) The operational LMAC, which replaces the calibration one when it's
  *    done with the first calibration round.
  *
  * Once those 3 FWs have been loaded, we send the periodic calibration
  * command, and then the device is available for regular 802.11 operations.
  */
 int iwm_load_fw(struct iwm_priv *iwm)
 {
 	unsigned long init_calib_map, periodic_calib_map;
 	unsigned long expected_calib_map;
 	int ret;

 	/* We first start downloading the UMAC */
 	ret = iwm_load_umac(iwm);
 	if (ret < 0) {
 		IWM_ERR(iwm, "UMAC loading failed\n");
 		return ret;
 	}

 	/* Handle UMAC_ALIVE notification */
 	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC,
 			       WAIT_NOTIF_TIMEOUT);
 	if (ret) {
 		IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret);
 		return ret;
 	}

 	/* UMAC is alive, we can download the calibration LMAC */
 	ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name);
 	if (ret) {
 		IWM_ERR(iwm, "Calibration LMAC loading failed\n");
 		return ret;
 	}

 	/* Handle UMAC_INIT_COMPLETE notification */
 	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
 			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
 	if (ret) {
 		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration "
 			"LMAC: %d\n", ret);
 		return ret;
 	}

 	/* Read EEPROM data */
 	ret = iwm_eeprom_init(iwm);
 	if (ret < 0) {
 		IWM_ERR(iwm, "Couldn't init eeprom array\n");
 		return ret;
 	}

 	init_calib_map = iwm->conf.calib_map & IWM_CALIB_MAP_INIT_MSK;
 	expected_calib_map = iwm->conf.expected_calib_map &
 		IWM_CALIB_MAP_INIT_MSK;
 	periodic_calib_map = IWM_CALIB_MAP_PER_LMAC(iwm->conf.calib_map);

 	ret = iwm_init_calib(iwm, init_calib_map, expected_calib_map,
 			     CALIB_CFG_RX_IQ_IDX);
 	if (ret < 0) {
 		/* Let's try the old way */
 		ret = iwm_init_calib(iwm, expected_calib_map,
 				     expected_calib_map,
 				     PHY_CALIBRATE_RX_IQ_CMD);
 		if (ret < 0) {
 			IWM_ERR(iwm, "Calibration result timeout\n");
 			goto out;
 		}
 	}

 	/* Handle LMAC CALIBRATION_COMPLETE notification */
 	ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION,
 			       IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
 	if (ret) {
 		IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n");
 		goto out;
 	}

 	IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map);

 	iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1);

 	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
 			       WAIT_NOTIF_TIMEOUT);
 	if (ret) {
 		IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
 		goto out;
 	}

 	/* Download the operational LMAC */
 	ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name);
 	if (ret) {
 		IWM_ERR(iwm, "LMAC loading failed\n");
 		goto out;
 	}

 	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
 			       IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
 	if (ret) {
 		IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret);
 		goto out;
 	}

 	iwm_send_prio_table(iwm);
 	iwm_send_calib_results(iwm);
 	iwm_send_periodic_calib_cfg(iwm, periodic_calib_map);
 	iwm_send_ct_kill_cfg(iwm, iwm->conf.ct_kill_entry,
 			     iwm->conf.ct_kill_exit);

 	return 0;

  out:
 	iwm_eeprom_exit(iwm);
 	return ret;
 }
	/*
	* Intel Wireless Multicomm 3200 WiFi driver
	*
	* Copyright (C) 2009 Intel Corporation. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name of Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*
	* Intel Corporation <ilw@linux.intel.com>
	* Samuel Ortiz <samuel.ortiz@intel.com>
	* Zhu Yi <yi.zhu@intel.com>
	*
	*/

	#include <linux/kernel.h>
	#include <linux/firmware.h>

	#include "iwm.h"
	#include "bus.h"
	#include "hal.h"
	#include "umac.h"
	#include "debug.h"
	#include "fw.h"
	#include "commands.h"

	static const char fw_barker[] = "WESTOPFORNOONE";

	/*
	* @op_code: Op code we're looking for.
	* @index: There can be several instances of the same opcode within
	* the firmware. Index specifies which one we're looking for.
	*/
	static int iwm_fw_op_offset(struct iwm_priv iwm, const struct firmware fw,
	u16 op_code, u32 index)
	{
	int offset = -EINVAL, fw_offset;
	u32 op_index = 0;
	const u8 *fw_ptr;
	struct iwm_fw_hdr_rec *rec;

	fw_offset = 0;
	fw_ptr = fw->data;

	/* We first need to look for the firmware barker */
	if (memcmp(fw_ptr, fw_barker, IWM_HDR_BARKER_LEN)) {
	IWM_ERR(iwm, "No barker string in this FW\n");
	return -EINVAL;
	}

	if (fw->size < IWM_HDR_LEN) {
	IWM_ERR(iwm, "FW is too small (%zu)\n", fw->size);
	return -EINVAL;
	}

	fw_offset += IWM_HDR_BARKER_LEN;

	while (fw_offset < fw->size) {
	rec = (struct iwm_fw_hdr_rec *)(fw_ptr + fw_offset);

	IWM_DBG_FW(iwm, DBG, "FW: op_code: 0x%x, len: %d @ 0x%x\n",
	rec->op_code, rec->len, fw_offset);

	if (rec->op_code == IWM_HDR_REC_OP_INVALID) {
	IWM_DBG_FW(iwm, DBG, "Reached INVALID op code\n");
	break;
	}

	if (rec->op_code == op_code) {
	if (op_index == index) {
	fw_offset += sizeof(struct iwm_fw_hdr_rec);
	offset = fw_offset;
	goto out;
	}
	op_index++;
	}

	fw_offset += sizeof(struct iwm_fw_hdr_rec) + rec->len;
	}

	out:
	return offset;
	}

	static int iwm_load_firmware_chunk(struct iwm_priv *iwm,
	const struct firmware *fw,
	struct iwm_fw_img_desc *img_desc)
	{
	struct iwm_udma_nonwifi_cmd target_cmd;
	u32 chunk_size;
	const u8 *chunk_ptr;
	int ret = 0;

	IWM_DBG_FW(iwm, INFO, "Loading FW chunk: %d bytes @ 0x%x\n",
	img_desc->length, img_desc->address);

	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_WRITE;
	target_cmd.handle_by_hw = 1;
	target_cmd.op2 = 0;
	target_cmd.resp = 0;
	target_cmd.eop = 1;

	chunk_size = img_desc->length;
	chunk_ptr = fw->data + img_desc->offset;

	while (chunk_size > 0) {
	u32 tmp_chunk_size;

	tmp_chunk_size = min_t(u32, chunk_size,
	IWM_MAX_NONWIFI_CMD_BUFF_SIZE);

	target_cmd.addr = cpu_to_le32(img_desc->address +
	(chunk_ptr - fw->data - img_desc->offset));
	target_cmd.op1_sz = cpu_to_le32(tmp_chunk_size);

	IWM_DBG_FW(iwm, DBG, "\t%d bytes @ 0x%x\n",
	tmp_chunk_size, target_cmd.addr);

	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, chunk_ptr);
	if (ret < 0) {
	IWM_ERR(iwm, "Couldn't load FW chunk\n");
	break;
	}

	chunk_size -= tmp_chunk_size;
	chunk_ptr += tmp_chunk_size;
	}

	return ret;
	}
	/*
	* To load a fw image to the target, we basically go through the
	* fw, looking for OP_MEM_DESC records. Once we found one, we
	* pass it to iwm_load_firmware_chunk().
	* The OP_MEM_DESC records contain the actuall memory chunk to be
	* sent, but also the destination address.
	*/
	static int iwm_load_img(struct iwm_priv iwm, const char img_name)
	{
	const struct firmware *fw;
	struct iwm_fw_img_desc *img_desc;
	struct iwm_fw_img_ver *ver;
	int ret = 0, fw_offset;
	u32 opcode_idx = 0, build_date;
	char *build_tag;

	ret = request_firmware(&fw, img_name, iwm_to_dev(iwm));
	if (ret) {
	IWM_ERR(iwm, "Request firmware failed");
	return ret;
	}

	IWM_DBG_FW(iwm, INFO, "Start to load FW %s\n", img_name);

	while (1) {
	fw_offset = iwm_fw_op_offset(iwm, fw,
	IWM_HDR_REC_OP_MEM_DESC,
	opcode_idx);
	if (fw_offset < 0)
	break;

	img_desc = (struct iwm_fw_img_desc *)(fw->data + fw_offset);
	ret = iwm_load_firmware_chunk(iwm, fw, img_desc);
	if (ret < 0)
	goto err_release_fw;
	opcode_idx++;
	};

	/* Read firmware version */
	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_SW_VER, 0);
	if (fw_offset < 0)
	goto err_release_fw;

	ver = (struct iwm_fw_img_ver *)(fw->data + fw_offset);

	/* Read build tag */
	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_TAG, 0);
	if (fw_offset < 0)
	goto err_release_fw;

	build_tag = (char *)(fw->data + fw_offset);

	/* Read build date */
	fw_offset = iwm_fw_op_offset(iwm, fw, IWM_HDR_REC_OP_BUILD_DATE, 0);
	if (fw_offset < 0)
	goto err_release_fw;

	build_date = (u32 )(fw->data + fw_offset);

	IWM_INFO(iwm, "%s:\n", img_name);
	IWM_INFO(iwm, "\tVersion: %02X.%02X\n", ver->major, ver->minor);
	IWM_INFO(iwm, "\tBuild tag: %s\n", build_tag);
	IWM_INFO(iwm, "\tBuild date: %x-%x-%x\n",
	IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
	IWM_BUILD_DAY(build_date));

	if (!strcmp(img_name, iwm->bus_ops->umac_name))
	sprintf(iwm->umac_version, "%02X.%02X",
	ver->major, ver->minor);

	if (!strcmp(img_name, iwm->bus_ops->lmac_name))
	sprintf(iwm->lmac_version, "%02X.%02X",
	ver->major, ver->minor);

	err_release_fw:
	release_firmware(fw);

	return ret;
	}

	static int iwm_load_umac(struct iwm_priv *iwm)
	{
	struct iwm_udma_nonwifi_cmd target_cmd;
	int ret;

	ret = iwm_load_img(iwm, iwm->bus_ops->umac_name);
	if (ret < 0)
	return ret;

	/* We've loaded the UMAC, we can tell the target to jump there */
	target_cmd.opcode = UMAC_HDI_OUT_OPCODE_JUMP;
	target_cmd.addr = cpu_to_le32(UMAC_MU_FW_INST_DATA_12_ADDR);
	target_cmd.op1_sz = 0;
	target_cmd.op2 = 0;
	target_cmd.handle_by_hw = 0;
	target_cmd.resp = 1 ;
	target_cmd.eop = 1;

	ret = iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
	if (ret < 0)
	IWM_ERR(iwm, "Couldn't send JMP command\n");

	return ret;
	}

	static int iwm_load_lmac(struct iwm_priv iwm, const char img_name)
	{
	int ret;

	ret = iwm_load_img(iwm, img_name);
	if (ret < 0)
	return ret;

	return iwm_send_umac_reset(iwm,
	cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
	}

	static int iwm_init_calib(struct iwm_priv *iwm, unsigned long cfg_bitmap,
	unsigned long expected_bitmap, u8 rx_iq_cmd)
	{
	/* Read RX IQ calibration result from EEPROM */
	if (test_bit(rx_iq_cmd, &cfg_bitmap)) {
	iwm_store_rxiq_calib_result(iwm);
	set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
	}

	iwm_send_prio_table(iwm);
	iwm_send_init_calib_cfg(iwm, cfg_bitmap);

	while (iwm->calib_done_map != expected_bitmap) {
	if (iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
	IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT)) {
	IWM_DBG_FW(iwm, DBG, "Initial calibration timeout\n");
	return -ETIMEDOUT;
	}

	IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
	"0x%lx, expected calibrations: 0x%lx\n",
	iwm->calib_done_map, expected_bitmap);
	}

	return 0;
	}

	/*
	* We currently have to load 3 FWs:
	* 1) The UMAC (Upper MAC).
	* 2) The calibration LMAC (Lower MAC).
	* We then send the calibration init command, so that the device can
	* run a first calibration round.
	* 3) The operational LMAC, which replaces the calibration one when it's
	* done with the first calibration round.
	*
	* Once those 3 FWs have been loaded, we send the periodic calibration
	* command, and then the device is available for regular 802.11 operations.
	*/
	int iwm_load_fw(struct iwm_priv *iwm)
	{
	unsigned long init_calib_map, periodic_calib_map;
	unsigned long expected_calib_map;
	int ret;

	/* We first start downloading the UMAC */
	ret = iwm_load_umac(iwm);
	if (ret < 0) {
	IWM_ERR(iwm, "UMAC loading failed\n");
	return ret;
	}

	/* Handle UMAC_ALIVE notification */
	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_ALIVE, IWM_SRC_UMAC,
	WAIT_NOTIF_TIMEOUT);
	if (ret) {
	IWM_ERR(iwm, "Handle UMAC_ALIVE failed: %d\n", ret);
	return ret;
	}

	/* UMAC is alive, we can download the calibration LMAC */
	ret = iwm_load_lmac(iwm, iwm->bus_ops->calib_lmac_name);
	if (ret) {
	IWM_ERR(iwm, "Calibration LMAC loading failed\n");
	return ret;
	}

	/* Handle UMAC_INIT_COMPLETE notification */
	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
	IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
	if (ret) {
	IWM_ERR(iwm, "Handle INIT_COMPLETE failed for calibration "
	"LMAC: %d\n", ret);
	return ret;
	}

	/* Read EEPROM data */
	ret = iwm_eeprom_init(iwm);
	if (ret < 0) {
	IWM_ERR(iwm, "Couldn't init eeprom array\n");
	return ret;
	}

	init_calib_map = iwm->conf.calib_map & IWM_CALIB_MAP_INIT_MSK;
	expected_calib_map = iwm->conf.expected_calib_map &
	IWM_CALIB_MAP_INIT_MSK;
	periodic_calib_map = IWM_CALIB_MAP_PER_LMAC(iwm->conf.calib_map);

	ret = iwm_init_calib(iwm, init_calib_map, expected_calib_map,
	CALIB_CFG_RX_IQ_IDX);
	if (ret < 0) {
	/* Let's try the old way */
	ret = iwm_init_calib(iwm, expected_calib_map,
	expected_calib_map,
	PHY_CALIBRATE_RX_IQ_CMD);
	if (ret < 0) {
	IWM_ERR(iwm, "Calibration result timeout\n");
	goto out;
	}
	}

	/* Handle LMAC CALIBRATION_COMPLETE notification */
	ret = iwm_notif_handle(iwm, CALIBRATION_COMPLETE_NOTIFICATION,
	IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
	if (ret) {
	IWM_ERR(iwm, "Wait for CALIBRATION_COMPLETE timeout\n");
	goto out;
	}

	IWM_INFO(iwm, "LMAC calibration done: 0x%lx\n", iwm->calib_done_map);

	iwm_send_umac_reset(iwm, cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_RESET), 1);

	ret = iwm_notif_handle(iwm, UMAC_CMD_OPCODE_RESET, IWM_SRC_UMAC,
	WAIT_NOTIF_TIMEOUT);
	if (ret) {
	IWM_ERR(iwm, "Wait for UMAC RESET timeout\n");
	goto out;
	}

	/* Download the operational LMAC */
	ret = iwm_load_lmac(iwm, iwm->bus_ops->lmac_name);
	if (ret) {
	IWM_ERR(iwm, "LMAC loading failed\n");
	goto out;
	}

	ret = iwm_notif_handle(iwm, UMAC_NOTIFY_OPCODE_INIT_COMPLETE,
	IWM_SRC_UMAC, WAIT_NOTIF_TIMEOUT);
	if (ret) {
	IWM_ERR(iwm, "Handle INIT_COMPLETE failed for LMAC: %d\n", ret);
	goto out;
	}

	iwm_send_prio_table(iwm);
	iwm_send_calib_results(iwm);
	iwm_send_periodic_calib_cfg(iwm, periodic_calib_map);
	iwm_send_ct_kill_cfg(iwm, iwm->conf.ct_kill_entry,
	iwm->conf.ct_kill_exit);

	return 0;

	out:
	iwm_eeprom_exit(iwm);
	return ret;
	}