| /* |
| * reset controller for CSR SiRFprimaII |
| * |
| * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. |
| * |
| * Licensed under GPLv2 or later. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mutex.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/reboot.h> |
| |
| void __iomem *sirfsoc_rstc_base; |
| static DEFINE_MUTEX(rstc_lock); |
| |
| static struct of_device_id rstc_ids[] = { |
| { .compatible = "sirf,prima2-rstc" }, |
| { .compatible = "sirf,marco-rstc" }, |
| {}, |
| }; |
| |
| static int __init sirfsoc_of_rstc_init(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_matching_node(NULL, rstc_ids); |
| if (!np) { |
| pr_err("unable to find compatible sirf rstc node in dtb\n"); |
| return -ENOENT; |
| } |
| |
| sirfsoc_rstc_base = of_iomap(np, 0); |
| if (!sirfsoc_rstc_base) |
| panic("unable to map rstc cpu registers\n"); |
| |
| of_node_put(np); |
| |
| return 0; |
| } |
| early_initcall(sirfsoc_of_rstc_init); |
| |
| int sirfsoc_reset_device(struct device *dev) |
| { |
| u32 reset_bit; |
| |
| if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit)) |
| return -EINVAL; |
| |
| mutex_lock(&rstc_lock); |
| |
| if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) { |
| /* |
| * Writing 1 to this bit resets corresponding block. Writing 0 to this |
| * bit de-asserts reset signal of the corresponding block. |
| * datasheet doesn't require explicit delay between the set and clear |
| * of reset bit. it could be shorter if tests pass. |
| */ |
| writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, |
| sirfsoc_rstc_base + (reset_bit / 32) * 4); |
| msleep(10); |
| writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, |
| sirfsoc_rstc_base + (reset_bit / 32) * 4); |
| } else { |
| /* |
| * For MARCO and POLO |
| * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR |
| * register de-asserts reset signal of the corresponding block. |
| * datasheet doesn't require explicit delay between the set and clear |
| * of reset bit. it could be shorter if tests pass. |
| */ |
| writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); |
| msleep(10); |
| writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); |
| } |
| |
| mutex_unlock(&rstc_lock); |
| |
| return 0; |
| } |
| |
| #define SIRFSOC_SYS_RST_BIT BIT(31) |
| |
| void sirfsoc_restart(enum reboot_mode mode, const char *cmd) |
| { |
| writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); |
| } |