| /* |
| * DVB USB library - provides a generic interface for a DVB USB device driver. |
| * |
| * dvb-usb-init.c |
| * |
| * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include "dvb-usb-common.h" |
| |
| /* debug */ |
| int dvb_usb_debug; |
| module_param_named(debug,dvb_usb_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256 (or-able))." DVB_USB_DEBUG_STATUS); |
| |
| int dvb_usb_disable_rc_polling; |
| module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); |
| MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); |
| |
| static int dvb_usb_force_pid_filter_usage; |
| module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); |
| MODULE_PARM_DESC(disable_rc_polling, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); |
| |
| static int dvb_usb_adapter_init(struct dvb_usb_device *d) |
| { |
| struct dvb_usb_adapter *adap; |
| int ret,n; |
| |
| for (n = 0; n < d->props.num_adapters; n++) { |
| adap = &d->adapter[n]; |
| adap->dev = d; |
| adap->id = n; |
| |
| memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties)); |
| |
| /* speed - when running at FULL speed we need a HW PID filter */ |
| if (d->udev->speed == USB_SPEED_FULL && !(adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER)) { |
| err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); |
| return -ENODEV; |
| } |
| |
| if ((d->udev->speed == USB_SPEED_FULL && adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) || |
| (adap->props.caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { |
| info("will use the device's hardware PID filter (table count: %d).",adap->props.pid_filter_count); |
| adap->pid_filtering = 1; |
| adap->max_feed_count = adap->props.pid_filter_count; |
| } else { |
| info("will pass the complete MPEG2 transport stream to the software demuxer."); |
| adap->pid_filtering = 0; |
| adap->max_feed_count = 255; |
| } |
| |
| if (!adap->pid_filtering && |
| dvb_usb_force_pid_filter_usage && |
| adap->props.caps & DVB_USB_ADAP_HAS_PID_FILTER) { |
| info("pid filter enabled by module option."); |
| adap->pid_filtering = 1; |
| adap->max_feed_count = adap->props.pid_filter_count; |
| } |
| |
| if (adap->props.size_of_priv > 0) { |
| adap->priv = kzalloc(adap->props.size_of_priv,GFP_KERNEL); |
| if (adap->priv == NULL) { |
| err("no memory for priv for adapter %d.",n); |
| return -ENOMEM; |
| } |
| } |
| |
| if ((ret = dvb_usb_adapter_stream_init(adap)) || |
| (ret = dvb_usb_adapter_dvb_init(adap)) || |
| (ret = dvb_usb_adapter_frontend_init(adap))) { |
| return ret; |
| } |
| |
| d->num_adapters_initialized++; |
| d->state |= DVB_USB_STATE_DVB; |
| } |
| |
| /* |
| * when reloading the driver w/o replugging the device |
| * sometimes a timeout occures, this helps |
| */ |
| if (d->props.generic_bulk_ctrl_endpoint != 0) { |
| usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); |
| usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); |
| } |
| |
| return 0; |
| } |
| |
| static int dvb_usb_adapter_exit(struct dvb_usb_device *d) |
| { |
| int n; |
| for (n = 0; n < d->num_adapters_initialized; n++) { |
| dvb_usb_adapter_frontend_exit(&d->adapter[n]); |
| dvb_usb_adapter_dvb_exit(&d->adapter[n]); |
| dvb_usb_adapter_stream_exit(&d->adapter[n]); |
| kfree(d->adapter[n].priv); |
| } |
| d->num_adapters_initialized = 0; |
| d->state &= ~DVB_USB_STATE_DVB; |
| return 0; |
| } |
| |
| |
| /* general initialization functions */ |
| static int dvb_usb_exit(struct dvb_usb_device *d) |
| { |
| deb_info("state before exiting everything: %x\n",d->state); |
| dvb_usb_remote_exit(d); |
| dvb_usb_adapter_exit(d); |
| dvb_usb_i2c_exit(d); |
| deb_info("state should be zero now: %x\n",d->state); |
| d->state = DVB_USB_STATE_INIT; |
| kfree(d->priv); |
| kfree(d); |
| return 0; |
| } |
| |
| static int dvb_usb_init(struct dvb_usb_device *d) |
| { |
| int ret = 0; |
| |
| mutex_init(&d->usb_mutex); |
| mutex_init(&d->i2c_mutex); |
| |
| d->state = DVB_USB_STATE_INIT; |
| |
| if (d->props.size_of_priv > 0) { |
| d->priv = kzalloc(d->props.size_of_priv,GFP_KERNEL); |
| if (d->priv == NULL) { |
| err("no memory for priv in 'struct dvb_usb_device'"); |
| return -ENOMEM; |
| } |
| } |
| |
| /* check the capabilities and set appropriate variables */ |
| dvb_usb_device_power_ctrl(d, 1); |
| |
| if ((ret = dvb_usb_i2c_init(d)) || |
| (ret = dvb_usb_adapter_init(d))) { |
| dvb_usb_exit(d); |
| return ret; |
| } |
| |
| if ((ret = dvb_usb_remote_init(d))) |
| err("could not initialize remote control."); |
| |
| dvb_usb_device_power_ctrl(d, 0); |
| |
| return 0; |
| } |
| |
| /* determine the name and the state of the just found USB device */ |
| static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_device_properties *props, int *cold) |
| { |
| int i,j; |
| struct dvb_usb_device_description *desc = NULL; |
| *cold = -1; |
| |
| for (i = 0; i < props->num_device_descs; i++) { |
| |
| for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { |
| deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); |
| if (props->devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && |
| props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { |
| *cold = 1; |
| desc = &props->devices[i]; |
| break; |
| } |
| } |
| |
| if (desc != NULL) |
| break; |
| |
| for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { |
| deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); |
| if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && |
| props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { |
| *cold = 0; |
| desc = &props->devices[i]; |
| break; |
| } |
| } |
| } |
| |
| if (desc != NULL && props->identify_state != NULL) |
| props->identify_state(udev,props,&desc,cold); |
| |
| return desc; |
| } |
| |
| int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| if (onoff) |
| d->powered++; |
| else |
| d->powered--; |
| |
| if (d->powered == 0 || (onoff && d->powered == 1)) { // when switching from 1 to 0 or from 0 to 1 |
| deb_info("power control: %d\n", onoff); |
| if (d->props.power_ctrl) |
| return d->props.power_ctrl(d, onoff); |
| } |
| return 0; |
| } |
| |
| /* |
| * USB |
| */ |
| int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_device_properties |
| *props, struct module *owner,struct dvb_usb_device **du) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct dvb_usb_device *d = NULL; |
| struct dvb_usb_device_description *desc = NULL; |
| |
| int ret = -ENOMEM,cold=0; |
| |
| if (du != NULL) |
| *du = NULL; |
| |
| if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) { |
| deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); |
| return -ENODEV; |
| } |
| |
| if (cold) { |
| info("found a '%s' in cold state, will try to load a firmware",desc->name); |
| ret = dvb_usb_download_firmware(udev,props); |
| if (!props->no_reconnect || ret != 0) |
| return ret; |
| } |
| |
| info("found a '%s' in warm state.",desc->name); |
| d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); |
| if (d == NULL) { |
| err("no memory for 'struct dvb_usb_device'"); |
| return ret; |
| } |
| |
| d->udev = udev; |
| memcpy(&d->props,props,sizeof(struct dvb_usb_device_properties)); |
| d->desc = desc; |
| d->owner = owner; |
| |
| usb_set_intfdata(intf, d); |
| |
| if (du != NULL) |
| *du = d; |
| |
| ret = dvb_usb_init(d); |
| |
| if (ret == 0) |
| info("%s successfully initialized and connected.",desc->name); |
| else |
| info("%s error while loading driver (%d)",desc->name,ret); |
| return ret; |
| } |
| EXPORT_SYMBOL(dvb_usb_device_init); |
| |
| void dvb_usb_device_exit(struct usb_interface *intf) |
| { |
| struct dvb_usb_device *d = usb_get_intfdata(intf); |
| const char *name = "generic DVB-USB module"; |
| |
| usb_set_intfdata(intf,NULL); |
| if (d != NULL && d->desc != NULL) { |
| name = d->desc->name; |
| dvb_usb_exit(d); |
| } |
| info("%s successfully deinitialized and disconnected.",name); |
| |
| } |
| EXPORT_SYMBOL(dvb_usb_device_exit); |
| |
| MODULE_VERSION("1.0"); |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); |
| MODULE_LICENSE("GPL"); |