drivers/media/video/marvell-ccic/mcam-core.h - maze/linux - Git at Google

 /*
  * Marvell camera core structures.
  *
  * Copyright 2011 Jonathan Corbet corbet@lwn.net
  */
 #ifndef _MCAM_CORE_H
 #define _MCAM_CORE_H

 #include <linux/list.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
 #include <media/videobuf2-core.h>

 /*
  * Create our own symbols for the supported buffer modes, but, for now,
  * base them entirely on which videobuf2 options have been selected.
  */
 #if defined(CONFIG_VIDEOBUF2_VMALLOC) || defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE)
 #define MCAM_MODE_VMALLOC 1
 #endif

 #if defined(CONFIG_VIDEOBUF2_DMA_CONTIG) || defined(CONFIG_VIDEOBUF2_DMA_CONTIG_MODULE)
 #define MCAM_MODE_DMA_CONTIG 1
 #endif

 #if defined(CONFIG_VIDEOBUF2_DMA_SG) || defined(CONFIG_VIDEOBUF2_DMA_SG_MODULE)
 #define MCAM_MODE_DMA_SG 1
 #endif

 #if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
 	!defined(MCAM_MODE_DMA_SG)
 #error One of the videobuf buffer modes must be selected in the config
 #endif


 enum mcam_state {
 	S_NOTREADY,	/* Not yet initialized */
 	S_IDLE,		/* Just hanging around */
 	S_FLAKED,	/* Some sort of problem */
 	S_STREAMING,	/* Streaming data */
 	S_BUFWAIT	/* streaming requested but no buffers yet */
 };
 #define MAX_DMA_BUFS 3

 /*
  * Different platforms work best with different buffer modes, so we
  * let the platform pick.
  */
 enum mcam_buffer_mode {
 	B_vmalloc = 0,
 	B_DMA_contig = 1,
 	B_DMA_sg = 2
 };

 /*
  * Is a given buffer mode supported by the current kernel configuration?
  */
 static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
 {
 	switch (mode) {
 #ifdef MCAM_MODE_VMALLOC
 	case B_vmalloc:
 #endif
 #ifdef MCAM_MODE_DMA_CONTIG
 	case B_DMA_contig:
 #endif
 #ifdef MCAM_MODE_DMA_SG
 	case B_DMA_sg:
 #endif
 		return 1;
 	default:
 		return 0;
 	}
 }


 /*
  * A description of one of our devices.
  * Locking: controlled by s_mutex.  Certain fields, however, require
  *          the dev_lock spinlock; they are marked as such by comments.
  *          dev_lock is also required for access to device registers.
  */
 struct mcam_camera {
 	/*
 	 * These fields should be set by the platform code prior to
 	 * calling mcam_register().
 	 */
 	struct i2c_adapter *i2c_adapter;
 	unsigned char __iomem *regs;
 	spinlock_t dev_lock;
 	struct device *dev; /* For messages, dma alloc */
 	unsigned int chip_id;
 	short int clock_speed;	/* Sensor clock speed, default 30 */
 	short int use_smbus;	/* SMBUS or straight I2c? */
 	enum mcam_buffer_mode buffer_mode;
 	/*
 	 * Callbacks from the core to the platform code.
 	 */
 	void (*plat_power_up) (struct mcam_camera *cam);
 	void (*plat_power_down) (struct mcam_camera *cam);

 	/*
 	 * Everything below here is private to the mcam core and
 	 * should not be touched by the platform code.
 	 */
 	struct v4l2_device v4l2_dev;
 	enum mcam_state state;
 	unsigned long flags;		/* Buffer status, mainly (dev_lock) */
 	int users;			/* How many open FDs */
 	struct file *owner;		/* Who has data access (v4l2) */

 	/*
 	 * Subsystem structures.
 	 */
 	struct video_device vdev;
 	struct v4l2_subdev *sensor;
 	unsigned short sensor_addr;

 	/* Videobuf2 stuff */
 	struct vb2_queue vb_queue;
 	struct list_head buffers;	/* Available frames */

 	unsigned int nbufs;		/* How many are alloc'd */
 	int next_buf;			/* Next to consume (dev_lock) */

 	/* DMA buffers - vmalloc mode */
 #ifdef MCAM_MODE_VMALLOC
 	unsigned int dma_buf_size;	/* allocated size */
 	void *dma_bufs[MAX_DMA_BUFS];	/* Internal buffer addresses */
 	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
 	struct tasklet_struct s_tasklet;
 #endif
 	unsigned int sequence;		/* Frame sequence number */
 	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */

 	/* DMA buffers - DMA modes */
 	struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
 	struct vb2_alloc_ctx *vb_alloc_ctx;

 	/* Mode-specific ops, set at open time */
 	void (*dma_setup)(struct mcam_camera *cam);
 	void (*frame_complete)(struct mcam_camera *cam, int frame);

 	/* Current operating parameters */
 	u32 sensor_type;		/* Currently ov7670 only */
 	struct v4l2_pix_format pix_format;
 	enum v4l2_mbus_pixelcode mbus_code;

 	/* Locks */
 	struct mutex s_mutex; /* Access to this structure */
 };


 /*
  * Register I/O functions.  These are here because the platform code
  * may legitimately need to mess with the register space.
  */
 /*
  * Device register I/O
  */
 static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
 		unsigned int val)
 {
 	iowrite32(val, cam->regs + reg);
 }

 static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
 		unsigned int reg)
 {
 	return ioread32(cam->regs + reg);
 }


 static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
 		unsigned int val, unsigned int mask)
 {
 	unsigned int v = mcam_reg_read(cam, reg);

 	v = (v & ~mask) | (val & mask);
 	mcam_reg_write(cam, reg, v);
 }

 static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
 		unsigned int reg, unsigned int val)
 {
 	mcam_reg_write_mask(cam, reg, 0, val);
 }

 static inline void mcam_reg_set_bit(struct mcam_camera *cam,
 		unsigned int reg, unsigned int val)
 {
 	mcam_reg_write_mask(cam, reg, val, val);
 }

 /*
  * Functions for use by platform code.
  */
 int mccic_register(struct mcam_camera *cam);
 int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
 void mccic_shutdown(struct mcam_camera *cam);
 #ifdef CONFIG_PM
 void mccic_suspend(struct mcam_camera *cam);
 int mccic_resume(struct mcam_camera *cam);
 #endif

 /*
  * Register definitions for the m88alp01 camera interface.  Offsets in bytes
  * as given in the spec.
  */
 #define REG_Y0BAR	0x00
 #define REG_Y1BAR	0x04
 #define REG_Y2BAR	0x08
 /* ... */

 #define REG_IMGPITCH	0x24	/* Image pitch register */
 #define   IMGP_YP_SHFT	  2		/* Y pitch params */
 #define   IMGP_YP_MASK	  0x00003ffc	/* Y pitch field */
 #define	  IMGP_UVP_SHFT	  18		/* UV pitch (planar) */
 #define   IMGP_UVP_MASK   0x3ffc0000
 #define REG_IRQSTATRAW	0x28	/* RAW IRQ Status */
 #define   IRQ_EOF0	  0x00000001	/* End of frame 0 */
 #define   IRQ_EOF1	  0x00000002	/* End of frame 1 */
 #define   IRQ_EOF2	  0x00000004	/* End of frame 2 */
 #define   IRQ_SOF0	  0x00000008	/* Start of frame 0 */
 #define   IRQ_SOF1	  0x00000010	/* Start of frame 1 */
 #define   IRQ_SOF2	  0x00000020	/* Start of frame 2 */
 #define   IRQ_OVERFLOW	  0x00000040	/* FIFO overflow */
 #define   IRQ_TWSIW	  0x00010000	/* TWSI (smbus) write */
 #define   IRQ_TWSIR	  0x00020000	/* TWSI read */
 #define   IRQ_TWSIE	  0x00040000	/* TWSI error */
 #define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
 #define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
 #define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
 #define REG_IRQMASK	0x2c	/* IRQ mask - same bits as IRQSTAT */
 #define REG_IRQSTAT	0x30	/* IRQ status / clear */

 #define REG_IMGSIZE	0x34	/* Image size */
 #define  IMGSZ_V_MASK	  0x1fff0000
 #define  IMGSZ_V_SHIFT	  16
 #define	 IMGSZ_H_MASK	  0x00003fff
 #define REG_IMGOFFSET	0x38	/* IMage offset */

 #define REG_CTRL0	0x3c	/* Control 0 */
 #define   C0_ENABLE	  0x00000001	/* Makes the whole thing go */

 /* Mask for all the format bits */
 #define   C0_DF_MASK	  0x00fffffc    /* Bits 2-23 */

 /* RGB ordering */
 #define	  C0_RGB4_RGBX	  0x00000000
 #define	  C0_RGB4_XRGB	  0x00000004
 #define	  C0_RGB4_BGRX	  0x00000008
 #define	  C0_RGB4_XBGR	  0x0000000c
 #define	  C0_RGB5_RGGB	  0x00000000
 #define	  C0_RGB5_GRBG	  0x00000004
 #define	  C0_RGB5_GBRG	  0x00000008
 #define	  C0_RGB5_BGGR	  0x0000000c

 /* Spec has two fields for DIN and DOUT, but they must match, so
    combine them here. */
 #define	  C0_DF_YUV	  0x00000000	/* Data is YUV	    */
 #define	  C0_DF_RGB	  0x000000a0	/* ... RGB		    */
 #define	  C0_DF_BAYER	  0x00000140	/* ... Bayer		    */
 /* 8-8-8 must be missing from the below - ask */
 #define	  C0_RGBF_565	  0x00000000
 #define	  C0_RGBF_444	  0x00000800
 #define	  C0_RGB_BGR	  0x00001000	/* Blue comes first */
 #define	  C0_YUV_PLANAR	  0x00000000	/* YUV 422 planar format */
 #define	  C0_YUV_PACKED	  0x00008000	/* YUV 422 packed	*/
 #define	  C0_YUV_420PL	  0x0000a000	/* YUV 420 planar	*/
 /* Think that 420 packed must be 111 - ask */
 #define	  C0_YUVE_YUYV	  0x00000000	/* Y1CbY0Cr		*/
 #define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb		*/
 #define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0		*/
 #define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0		*/
 #define	  C0_YUVE_XYUV	  0x00000000	/* 420: .YUV		*/
 #define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU		*/
 #define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY		*/
 #define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY		*/
 /* Bayer bits 18,19 if needed */
 #define	  C0_HPOL_LOW	  0x01000000	/* HSYNC polarity active low */
 #define	  C0_VPOL_LOW	  0x02000000	/* VSYNC polarity active low */
 #define	  C0_VCLK_LOW	  0x04000000	/* VCLK on falling edge */
 #define	  C0_DOWNSCALE	  0x08000000	/* Enable downscaler */
 #define	  C0_SIFM_MASK	  0xc0000000	/* SIF mode bits */
 #define	  C0_SIF_HVSYNC	  0x00000000	/* Use H/VSYNC */
 #define	  CO_SOF_NOSYNC	  0x40000000	/* Use inband active signaling */

 /* Bits below C1_444ALPHA are not present in Cafe */
 #define REG_CTRL1	0x40	/* Control 1 */
 #define	  C1_CLKGATE	  0x00000001	/* Sensor clock gate */
 #define   C1_DESC_ENA	  0x00000100	/* DMA descriptor enable */
 #define   C1_DESC_3WORD   0x00000200	/* Three-word descriptors used */
 #define	  C1_444ALPHA	  0x00f00000	/* Alpha field in RGB444 */
 #define	  C1_ALPHA_SHFT	  20
 #define	  C1_DMAB32	  0x00000000	/* 32-byte DMA burst */
 #define	  C1_DMAB16	  0x02000000	/* 16-byte DMA burst */
 #define	  C1_DMAB64	  0x04000000	/* 64-byte DMA burst */
 #define	  C1_DMAB_MASK	  0x06000000
 #define	  C1_TWOBUFS	  0x08000000	/* Use only two DMA buffers */
 #define	  C1_PWRDWN	  0x10000000	/* Power down */

 #define REG_CLKCTRL	0x88	/* Clock control */
 #define	  CLK_DIV_MASK	  0x0000ffff	/* Upper bits RW "reserved" */

 /* This appears to be a Cafe-only register */
 #define REG_UBAR	0xc4	/* Upper base address register */

 /* Armada 610 DMA descriptor registers */
 #define	REG_DMA_DESC_Y	0x200
 #define	REG_DMA_DESC_U	0x204
 #define	REG_DMA_DESC_V	0x208
 #define REG_DESC_LEN_Y	0x20c	/* Lengths are in bytes */
 #define	REG_DESC_LEN_U	0x210
 #define REG_DESC_LEN_V	0x214

 /*
  * Useful stuff that probably belongs somewhere global.
  */
 #define VGA_WIDTH	640
 #define VGA_HEIGHT	480

 #endif /* _MCAM_CORE_H */
	/*
	* Marvell camera core structures.
	*
	* Copyright 2011 Jonathan Corbet corbet@lwn.net
	*/
	#ifndef _MCAM_CORE_H
	#define _MCAM_CORE_H

	#include <linux/list.h>
	#include <media/v4l2-common.h>
	#include <media/v4l2-dev.h>
	#include <media/videobuf2-core.h>

	/*
	* Create our own symbols for the supported buffer modes, but, for now,
	* base them entirely on which videobuf2 options have been selected.
	*/
	#if defined(CONFIG_VIDEOBUF2_VMALLOC) \|\| defined(CONFIG_VIDEOBUF2_VMALLOC_MODULE)
	#define MCAM_MODE_VMALLOC 1
	#endif

	#if defined(CONFIG_VIDEOBUF2_DMA_CONTIG) \|\| defined(CONFIG_VIDEOBUF2_DMA_CONTIG_MODULE)
	#define MCAM_MODE_DMA_CONTIG 1
	#endif

	#if defined(CONFIG_VIDEOBUF2_DMA_SG) \|\| defined(CONFIG_VIDEOBUF2_DMA_SG_MODULE)
	#define MCAM_MODE_DMA_SG 1
	#endif

	#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
	!defined(MCAM_MODE_DMA_SG)
	#error One of the videobuf buffer modes must be selected in the config
	#endif


	enum mcam_state {
	S_NOTREADY, /* Not yet initialized */
	S_IDLE, /* Just hanging around */
	S_FLAKED, /* Some sort of problem */
	S_STREAMING, /* Streaming data */
	S_BUFWAIT /* streaming requested but no buffers yet */
	};
	#define MAX_DMA_BUFS 3

	/*
	* Different platforms work best with different buffer modes, so we
	* let the platform pick.
	*/
	enum mcam_buffer_mode {
	B_vmalloc = 0,
	B_DMA_contig = 1,
	B_DMA_sg = 2
	};

	/*
	* Is a given buffer mode supported by the current kernel configuration?
	*/
	static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
	{
	switch (mode) {
	#ifdef MCAM_MODE_VMALLOC
	case B_vmalloc:
	#endif
	#ifdef MCAM_MODE_DMA_CONTIG
	case B_DMA_contig:
	#endif
	#ifdef MCAM_MODE_DMA_SG
	case B_DMA_sg:
	#endif
	return 1;
	default:
	return 0;
	}
	}


	/*
	* A description of one of our devices.
	* Locking: controlled by s_mutex. Certain fields, however, require
	* the dev_lock spinlock; they are marked as such by comments.
	* dev_lock is also required for access to device registers.
	*/
	struct mcam_camera {
	/*
	* These fields should be set by the platform code prior to
	* calling mcam_register().
	*/
	struct i2c_adapter *i2c_adapter;
	unsigned char __iomem *regs;
	spinlock_t dev_lock;
	struct device dev; / For messages, dma alloc */
	unsigned int chip_id;
	short int clock_speed; /* Sensor clock speed, default 30 */
	short int use_smbus; /* SMBUS or straight I2c? */
	enum mcam_buffer_mode buffer_mode;
	/*
	* Callbacks from the core to the platform code.
	*/
	void (plat_power_up) (struct mcam_camera cam);
	void (plat_power_down) (struct mcam_camera cam);

	/*
	* Everything below here is private to the mcam core and
	* should not be touched by the platform code.
	*/
	struct v4l2_device v4l2_dev;
	enum mcam_state state;
	unsigned long flags; /* Buffer status, mainly (dev_lock) */
	int users; /* How many open FDs */
	struct file owner; / Who has data access (v4l2) */

	/*
	* Subsystem structures.
	*/
	struct video_device vdev;
	struct v4l2_subdev *sensor;
	unsigned short sensor_addr;

	/* Videobuf2 stuff */
	struct vb2_queue vb_queue;
	struct list_head buffers; /* Available frames */

	unsigned int nbufs; /* How many are alloc'd */
	int next_buf; /* Next to consume (dev_lock) */

	/* DMA buffers - vmalloc mode */
	#ifdef MCAM_MODE_VMALLOC
	unsigned int dma_buf_size; /* allocated size */
	void dma_bufs[MAX_DMA_BUFS]; / Internal buffer addresses */
	dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
	struct tasklet_struct s_tasklet;
	#endif
	unsigned int sequence; /* Frame sequence number */
	unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */

	/* DMA buffers - DMA modes */
	struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
	struct vb2_alloc_ctx *vb_alloc_ctx;

	/* Mode-specific ops, set at open time */
	void (dma_setup)(struct mcam_camera cam);
	void (frame_complete)(struct mcam_camera cam, int frame);

	/* Current operating parameters */
	u32 sensor_type; /* Currently ov7670 only */
	struct v4l2_pix_format pix_format;
	enum v4l2_mbus_pixelcode mbus_code;

	/* Locks */
	struct mutex s_mutex; /* Access to this structure */
	};


	/*
	* Register I/O functions. These are here because the platform code
	* may legitimately need to mess with the register space.
	*/
	/*
	* Device register I/O
	*/
	static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
	unsigned int val)
	{
	iowrite32(val, cam->regs + reg);
	}

	static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
	unsigned int reg)
	{
	return ioread32(cam->regs + reg);
	}


	static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
	unsigned int val, unsigned int mask)
	{
	unsigned int v = mcam_reg_read(cam, reg);

	v = (v & ~mask) \| (val & mask);
	mcam_reg_write(cam, reg, v);
	}

	static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
	unsigned int reg, unsigned int val)
	{
	mcam_reg_write_mask(cam, reg, 0, val);
	}

	static inline void mcam_reg_set_bit(struct mcam_camera *cam,
	unsigned int reg, unsigned int val)
	{
	mcam_reg_write_mask(cam, reg, val, val);
	}

	/*
	* Functions for use by platform code.
	*/
	int mccic_register(struct mcam_camera *cam);
	int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
	void mccic_shutdown(struct mcam_camera *cam);
	#ifdef CONFIG_PM
	void mccic_suspend(struct mcam_camera *cam);
	int mccic_resume(struct mcam_camera *cam);
	#endif

	/*
	* Register definitions for the m88alp01 camera interface. Offsets in bytes
	* as given in the spec.
	*/
	#define REG_Y0BAR 0x00
	#define REG_Y1BAR 0x04
	#define REG_Y2BAR 0x08
	/* ... */

	#define REG_IMGPITCH 0x24 /* Image pitch register */
	#define IMGP_YP_SHFT 2 /* Y pitch params */
	#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */
	#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */
	#define IMGP_UVP_MASK 0x3ffc0000
	#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */
	#define IRQ_EOF0 0x00000001 /* End of frame 0 */
	#define IRQ_EOF1 0x00000002 /* End of frame 1 */
	#define IRQ_EOF2 0x00000004 /* End of frame 2 */
	#define IRQ_SOF0 0x00000008 /* Start of frame 0 */
	#define IRQ_SOF1 0x00000010 /* Start of frame 1 */
	#define IRQ_SOF2 0x00000020 /* Start of frame 2 */
	#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */
	#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */
	#define IRQ_TWSIR 0x00020000 /* TWSI read */
	#define IRQ_TWSIE 0x00040000 /* TWSI error */
	#define TWSIIRQS (IRQ_TWSIW\|IRQ_TWSIR\|IRQ_TWSIE)
	#define FRAMEIRQS (IRQ_EOF0\|IRQ_EOF1\|IRQ_EOF2\|IRQ_SOF0\|IRQ_SOF1\|IRQ_SOF2)
	#define ALLIRQS (TWSIIRQS\|FRAMEIRQS\|IRQ_OVERFLOW)
	#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */
	#define REG_IRQSTAT 0x30 /* IRQ status / clear */

	#define REG_IMGSIZE 0x34 /* Image size */
	#define IMGSZ_V_MASK 0x1fff0000
	#define IMGSZ_V_SHIFT 16
	#define IMGSZ_H_MASK 0x00003fff
	#define REG_IMGOFFSET 0x38 /* IMage offset */

	#define REG_CTRL0 0x3c /* Control 0 */
	#define C0_ENABLE 0x00000001 /* Makes the whole thing go */

	/* Mask for all the format bits */
	#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */

	/* RGB ordering */
	#define C0_RGB4_RGBX 0x00000000
	#define C0_RGB4_XRGB 0x00000004
	#define C0_RGB4_BGRX 0x00000008
	#define C0_RGB4_XBGR 0x0000000c
	#define C0_RGB5_RGGB 0x00000000
	#define C0_RGB5_GRBG 0x00000004
	#define C0_RGB5_GBRG 0x00000008
	#define C0_RGB5_BGGR 0x0000000c

	/* Spec has two fields for DIN and DOUT, but they must match, so
	combine them here. */
	#define C0_DF_YUV 0x00000000 /* Data is YUV */
	#define C0_DF_RGB 0x000000a0 /* ... RGB */
	#define C0_DF_BAYER 0x00000140 /* ... Bayer */
	/* 8-8-8 must be missing from the below - ask */
	#define C0_RGBF_565 0x00000000
	#define C0_RGBF_444 0x00000800
	#define C0_RGB_BGR 0x00001000 /* Blue comes first */
	#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */
	#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */
	#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */
	/* Think that 420 packed must be 111 - ask */
	#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */
	#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
	#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
	#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
	#define C0_YUVE_XYUV 0x00000000 /* 420: .YUV */
	#define C0_YUVE_XYVU 0x00010000 /* 420: .YVU */
	#define C0_YUVE_XUVY 0x00020000 /* 420: .UVY */
	#define C0_YUVE_XVUY 0x00030000 /* 420: .VUY */
	/* Bayer bits 18,19 if needed */
	#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */
	#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */
	#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */
	#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */
	#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */
	#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */
	#define CO_SOF_NOSYNC 0x40000000 /* Use inband active signaling */

	/* Bits below C1_444ALPHA are not present in Cafe */
	#define REG_CTRL1 0x40 /* Control 1 */
	#define C1_CLKGATE 0x00000001 /* Sensor clock gate */
	#define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */
	#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */
	#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
	#define C1_ALPHA_SHFT 20
	#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
	#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
	#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
	#define C1_DMAB_MASK 0x06000000
	#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
	#define C1_PWRDWN 0x10000000 /* Power down */

	#define REG_CLKCTRL 0x88 /* Clock control */
	#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */

	/* This appears to be a Cafe-only register */
	#define REG_UBAR 0xc4 /* Upper base address register */

	/* Armada 610 DMA descriptor registers */
	#define REG_DMA_DESC_Y 0x200
	#define REG_DMA_DESC_U 0x204
	#define REG_DMA_DESC_V 0x208
	#define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */
	#define REG_DESC_LEN_U 0x210
	#define REG_DESC_LEN_V 0x214

	/*
	* Useful stuff that probably belongs somewhere global.
	*/
	#define VGA_WIDTH 640
	#define VGA_HEIGHT 480

	#endif /* _MCAM_CORE_H */