| /* i915_irq.c -- IRQ support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "drmP.h" |
| #include "drm.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| |
| #define MAX_NOPID ((u32)~0) |
| |
| /** These are the interrupts used by the driver */ |
| #define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ |
| I915_ASLE_INTERRUPT | \ |
| I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ |
| I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) |
| |
| void |
| i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != 0) { |
| dev_priv->irq_mask_reg &= ~mask; |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IMR); |
| } |
| } |
| |
| static inline void |
| i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) |
| { |
| if ((dev_priv->irq_mask_reg & mask) != mask) { |
| dev_priv->irq_mask_reg |= mask; |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IMR); |
| } |
| } |
| |
| /** |
| * i915_pipe_enabled - check if a pipe is enabled |
| * @dev: DRM device |
| * @pipe: pipe to check |
| * |
| * Reading certain registers when the pipe is disabled can hang the chip. |
| * Use this routine to make sure the PLL is running and the pipe is active |
| * before reading such registers if unsure. |
| */ |
| static int |
| i915_pipe_enabled(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF; |
| |
| if (I915_READ(pipeconf) & PIPEACONF_ENABLE) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * Emit blits for scheduled buffer swaps. |
| * |
| * This function will be called with the HW lock held. |
| * Because this function must grab the ring mutex (dev->struct_mutex), |
| * it can no longer run at soft irq time. We'll fix this when we do |
| * the DRI2 swap buffer work. |
| */ |
| static void i915_vblank_tasklet(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| struct list_head *list, *tmp, hits, *hit; |
| int nhits, nrects, slice[2], upper[2], lower[2], i; |
| unsigned counter[2]; |
| struct drm_drawable_info *drw; |
| drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv; |
| u32 cpp = dev_priv->cpp; |
| u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD | |
| XY_SRC_COPY_BLT_WRITE_ALPHA | |
| XY_SRC_COPY_BLT_WRITE_RGB) |
| : XY_SRC_COPY_BLT_CMD; |
| u32 src_pitch = sarea_priv->pitch * cpp; |
| u32 dst_pitch = sarea_priv->pitch * cpp; |
| u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); |
| RING_LOCALS; |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| if (IS_I965G(dev) && sarea_priv->front_tiled) { |
| cmd |= XY_SRC_COPY_BLT_DST_TILED; |
| dst_pitch >>= 2; |
| } |
| if (IS_I965G(dev) && sarea_priv->back_tiled) { |
| cmd |= XY_SRC_COPY_BLT_SRC_TILED; |
| src_pitch >>= 2; |
| } |
| |
| counter[0] = drm_vblank_count(dev, 0); |
| counter[1] = drm_vblank_count(dev, 1); |
| |
| DRM_DEBUG("\n"); |
| |
| INIT_LIST_HEAD(&hits); |
| |
| nhits = nrects = 0; |
| |
| spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); |
| |
| /* Find buffer swaps scheduled for this vertical blank */ |
| list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { |
| drm_i915_vbl_swap_t *vbl_swap = |
| list_entry(list, drm_i915_vbl_swap_t, head); |
| int pipe = vbl_swap->pipe; |
| |
| if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) |
| continue; |
| |
| list_del(list); |
| dev_priv->swaps_pending--; |
| drm_vblank_put(dev, pipe); |
| |
| spin_unlock(&dev_priv->swaps_lock); |
| spin_lock(&dev->drw_lock); |
| |
| drw = drm_get_drawable_info(dev, vbl_swap->drw_id); |
| |
| list_for_each(hit, &hits) { |
| drm_i915_vbl_swap_t *swap_cmp = |
| list_entry(hit, drm_i915_vbl_swap_t, head); |
| struct drm_drawable_info *drw_cmp = |
| drm_get_drawable_info(dev, swap_cmp->drw_id); |
| |
| /* Make sure both drawables are still |
| * around and have some rectangles before |
| * we look inside to order them for the |
| * blts below. |
| */ |
| if (drw_cmp && drw_cmp->num_rects > 0 && |
| drw && drw->num_rects > 0 && |
| drw_cmp->rects[0].y1 > drw->rects[0].y1) { |
| list_add_tail(list, hit); |
| break; |
| } |
| } |
| |
| spin_unlock(&dev->drw_lock); |
| |
| /* List of hits was empty, or we reached the end of it */ |
| if (hit == &hits) |
| list_add_tail(list, hits.prev); |
| |
| nhits++; |
| |
| spin_lock(&dev_priv->swaps_lock); |
| } |
| |
| if (nhits == 0) { |
| spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); |
| mutex_unlock(&dev->struct_mutex); |
| return; |
| } |
| |
| spin_unlock(&dev_priv->swaps_lock); |
| |
| i915_kernel_lost_context(dev); |
| |
| if (IS_I965G(dev)) { |
| BEGIN_LP_RING(4); |
| |
| OUT_RING(GFX_OP_DRAWRECT_INFO_I965); |
| OUT_RING(0); |
| OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16)); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } else { |
| BEGIN_LP_RING(6); |
| |
| OUT_RING(GFX_OP_DRAWRECT_INFO); |
| OUT_RING(0); |
| OUT_RING(0); |
| OUT_RING(sarea_priv->width | sarea_priv->height << 16); |
| OUT_RING(sarea_priv->width | sarea_priv->height << 16); |
| OUT_RING(0); |
| |
| ADVANCE_LP_RING(); |
| } |
| |
| sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT; |
| |
| upper[0] = upper[1] = 0; |
| slice[0] = max(sarea_priv->pipeA_h / nhits, 1); |
| slice[1] = max(sarea_priv->pipeB_h / nhits, 1); |
| lower[0] = sarea_priv->pipeA_y + slice[0]; |
| lower[1] = sarea_priv->pipeB_y + slice[0]; |
| |
| spin_lock(&dev->drw_lock); |
| |
| /* Emit blits for buffer swaps, partitioning both outputs into as many |
| * slices as there are buffer swaps scheduled in order to avoid tearing |
| * (based on the assumption that a single buffer swap would always |
| * complete before scanout starts). |
| */ |
| for (i = 0; i++ < nhits; |
| upper[0] = lower[0], lower[0] += slice[0], |
| upper[1] = lower[1], lower[1] += slice[1]) { |
| if (i == nhits) |
| lower[0] = lower[1] = sarea_priv->height; |
| |
| list_for_each(hit, &hits) { |
| drm_i915_vbl_swap_t *swap_hit = |
| list_entry(hit, drm_i915_vbl_swap_t, head); |
| struct drm_clip_rect *rect; |
| int num_rects, pipe; |
| unsigned short top, bottom; |
| |
| drw = drm_get_drawable_info(dev, swap_hit->drw_id); |
| |
| /* The drawable may have been destroyed since |
| * the vblank swap was queued |
| */ |
| if (!drw) |
| continue; |
| |
| rect = drw->rects; |
| pipe = swap_hit->pipe; |
| top = upper[pipe]; |
| bottom = lower[pipe]; |
| |
| for (num_rects = drw->num_rects; num_rects--; rect++) { |
| int y1 = max(rect->y1, top); |
| int y2 = min(rect->y2, bottom); |
| |
| if (y1 >= y2) |
| continue; |
| |
| BEGIN_LP_RING(8); |
| |
| OUT_RING(cmd); |
| OUT_RING(ropcpp | dst_pitch); |
| OUT_RING((y1 << 16) | rect->x1); |
| OUT_RING((y2 << 16) | rect->x2); |
| OUT_RING(sarea_priv->front_offset); |
| OUT_RING((y1 << 16) | rect->x1); |
| OUT_RING(src_pitch); |
| OUT_RING(sarea_priv->back_offset); |
| |
| ADVANCE_LP_RING(); |
| } |
| } |
| } |
| |
| spin_unlock_irqrestore(&dev->drw_lock, irqflags); |
| mutex_unlock(&dev->struct_mutex); |
| |
| list_for_each_safe(hit, tmp, &hits) { |
| drm_i915_vbl_swap_t *swap_hit = |
| list_entry(hit, drm_i915_vbl_swap_t, head); |
| |
| list_del(hit); |
| |
| drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER); |
| } |
| } |
| |
| /* Called from drm generic code, passed a 'crtc', which |
| * we use as a pipe index |
| */ |
| u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long high_frame; |
| unsigned long low_frame; |
| u32 high1, high2, low, count; |
| |
| high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; |
| low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; |
| |
| if (!i915_pipe_enabled(dev, pipe)) { |
| DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe); |
| return 0; |
| } |
| |
| /* |
| * High & low register fields aren't synchronized, so make sure |
| * we get a low value that's stable across two reads of the high |
| * register. |
| */ |
| do { |
| high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> |
| PIPE_FRAME_HIGH_SHIFT); |
| low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> |
| PIPE_FRAME_LOW_SHIFT); |
| high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> |
| PIPE_FRAME_HIGH_SHIFT); |
| } while (high1 != high2); |
| |
| count = (high1 << 8) | low; |
| |
| return count; |
| } |
| |
| void |
| i915_vblank_work_handler(struct work_struct *work) |
| { |
| drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, |
| vblank_work); |
| struct drm_device *dev = dev_priv->dev; |
| unsigned long irqflags; |
| |
| if (dev->lock.hw_lock == NULL) { |
| i915_vblank_tasklet(dev); |
| return; |
| } |
| |
| spin_lock_irqsave(&dev->tasklet_lock, irqflags); |
| dev->locked_tasklet_func = i915_vblank_tasklet; |
| spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); |
| |
| /* Try to get the lock now, if this fails, the lock |
| * holder will execute the tasklet during unlock |
| */ |
| if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) |
| return; |
| |
| dev->lock.lock_time = jiffies; |
| atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); |
| |
| spin_lock_irqsave(&dev->tasklet_lock, irqflags); |
| dev->locked_tasklet_func = NULL; |
| spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); |
| |
| i915_vblank_tasklet(dev); |
| drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); |
| } |
| |
| irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) |
| { |
| struct drm_device *dev = (struct drm_device *) arg; |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 iir; |
| u32 pipea_stats, pipeb_stats; |
| int vblank = 0; |
| |
| atomic_inc(&dev_priv->irq_received); |
| |
| if (dev->pdev->msi_enabled) |
| I915_WRITE(IMR, ~0); |
| iir = I915_READ(IIR); |
| |
| if (iir == 0) { |
| if (dev->pdev->msi_enabled) { |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IMR); |
| } |
| return IRQ_NONE; |
| } |
| |
| /* |
| * Clear the PIPE(A|B)STAT regs before the IIR otherwise |
| * we may get extra interrupts. |
| */ |
| if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { |
| pipea_stats = I915_READ(PIPEASTAT); |
| if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) |
| pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | |
| PIPE_VBLANK_INTERRUPT_ENABLE); |
| else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| |
| PIPE_VBLANK_INTERRUPT_STATUS)) { |
| vblank++; |
| drm_handle_vblank(dev, 0); |
| } |
| |
| I915_WRITE(PIPEASTAT, pipea_stats); |
| } |
| if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { |
| pipeb_stats = I915_READ(PIPEBSTAT); |
| /* Ack the event */ |
| I915_WRITE(PIPEBSTAT, pipeb_stats); |
| |
| /* The vblank interrupt gets enabled even if we didn't ask for |
| it, so make sure it's shut down again */ |
| if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) |
| pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | |
| PIPE_VBLANK_INTERRUPT_ENABLE); |
| else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| |
| PIPE_VBLANK_INTERRUPT_STATUS)) { |
| vblank++; |
| drm_handle_vblank(dev, 1); |
| } |
| |
| if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) |
| opregion_asle_intr(dev); |
| I915_WRITE(PIPEBSTAT, pipeb_stats); |
| } |
| |
| I915_WRITE(IIR, iir); |
| if (dev->pdev->msi_enabled) |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| (void) I915_READ(IIR); /* Flush posted writes */ |
| |
| if (dev_priv->sarea_priv) |
| dev_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| |
| if (iir & I915_USER_INTERRUPT) { |
| dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); |
| DRM_WAKEUP(&dev_priv->irq_queue); |
| } |
| |
| if (iir & I915_ASLE_INTERRUPT) |
| opregion_asle_intr(dev); |
| |
| if (vblank && dev_priv->swaps_pending > 0) |
| schedule_work(&dev_priv->vblank_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int i915_emit_irq(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| RING_LOCALS; |
| |
| i915_kernel_lost_context(dev); |
| |
| DRM_DEBUG("\n"); |
| |
| dev_priv->counter++; |
| if (dev_priv->counter > 0x7FFFFFFFUL) |
| dev_priv->counter = 1; |
| if (dev_priv->sarea_priv) |
| dev_priv->sarea_priv->last_enqueue = dev_priv->counter; |
| |
| BEGIN_LP_RING(6); |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->counter); |
| OUT_RING(0); |
| OUT_RING(0); |
| OUT_RING(MI_USER_INTERRUPT); |
| ADVANCE_LP_RING(); |
| |
| return dev_priv->counter; |
| } |
| |
| void i915_user_irq_get(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) |
| i915_enable_irq(dev_priv, I915_USER_INTERRUPT); |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| void i915_user_irq_put(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| unsigned long irqflags; |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); |
| if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) |
| i915_disable_irq(dev_priv, I915_USER_INTERRUPT); |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| static int i915_wait_irq(struct drm_device * dev, int irq_nr) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int ret = 0; |
| |
| DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr, |
| READ_BREADCRUMB(dev_priv)); |
| |
| if (READ_BREADCRUMB(dev_priv) >= irq_nr) { |
| if (dev_priv->sarea_priv) { |
| dev_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| } |
| return 0; |
| } |
| |
| if (dev_priv->sarea_priv) |
| dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; |
| |
| i915_user_irq_get(dev); |
| DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ, |
| READ_BREADCRUMB(dev_priv) >= irq_nr); |
| i915_user_irq_put(dev); |
| |
| if (ret == -EBUSY) { |
| DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", |
| READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); |
| } |
| |
| if (dev_priv->sarea_priv) |
| dev_priv->sarea_priv->last_dispatch = |
| READ_BREADCRUMB(dev_priv); |
| |
| return ret; |
| } |
| |
| /* Needs the lock as it touches the ring. |
| */ |
| int i915_irq_emit(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_irq_emit_t *emit = data; |
| int result; |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| mutex_lock(&dev->struct_mutex); |
| result = i915_emit_irq(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { |
| DRM_ERROR("copy_to_user\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| /* Doesn't need the hardware lock. |
| */ |
| int i915_irq_wait(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_irq_wait_t *irqwait = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| return i915_wait_irq(dev, irqwait->irq_seq); |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| int i915_enable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 pipestat_reg = 0; |
| u32 pipestat; |
| u32 interrupt = 0; |
| unsigned long irqflags; |
| |
| switch (pipe) { |
| case 0: |
| pipestat_reg = PIPEASTAT; |
| interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; |
| break; |
| case 1: |
| pipestat_reg = PIPEBSTAT; |
| interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| break; |
| default: |
| DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", |
| pipe); |
| return 0; |
| } |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| /* Enabling vblank events in IMR comes before PIPESTAT write, or |
| * there's a race where the PIPESTAT vblank bit gets set to 1, so |
| * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in |
| * ISR flashes to 1, but the IIR bit doesn't get set to 1 because |
| * IMR masks it. It doesn't ever get set after we clear the masking |
| * in IMR because the ISR bit is edge, not level-triggered, on the |
| * OR of PIPESTAT bits. |
| */ |
| i915_enable_irq(dev_priv, interrupt); |
| pipestat = I915_READ(pipestat_reg); |
| if (IS_I965G(dev)) |
| pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; |
| else |
| pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; |
| /* Clear any stale interrupt status */ |
| pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | |
| PIPE_VBLANK_INTERRUPT_STATUS); |
| I915_WRITE(pipestat_reg, pipestat); |
| (void) I915_READ(pipestat_reg); /* Posting read */ |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| |
| return 0; |
| } |
| |
| /* Called from drm generic code, passed 'crtc' which |
| * we use as a pipe index |
| */ |
| void i915_disable_vblank(struct drm_device *dev, int pipe) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 pipestat_reg = 0; |
| u32 pipestat; |
| u32 interrupt = 0; |
| unsigned long irqflags; |
| |
| switch (pipe) { |
| case 0: |
| pipestat_reg = PIPEASTAT; |
| interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; |
| break; |
| case 1: |
| pipestat_reg = PIPEBSTAT; |
| interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; |
| break; |
| default: |
| DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", |
| pipe); |
| return; |
| break; |
| } |
| |
| spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); |
| i915_disable_irq(dev_priv, interrupt); |
| pipestat = I915_READ(pipestat_reg); |
| pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | |
| PIPE_VBLANK_INTERRUPT_ENABLE); |
| /* Clear any stale interrupt status */ |
| pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | |
| PIPE_VBLANK_INTERRUPT_STATUS); |
| I915_WRITE(pipestat_reg, pipestat); |
| (void) I915_READ(pipestat_reg); /* Posting read */ |
| spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); |
| } |
| |
| /* Set the vblank monitor pipe |
| */ |
| int i915_vblank_pipe_set(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int i915_vblank_pipe_get(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_vblank_pipe_t *pipe = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; |
| |
| return 0; |
| } |
| |
| /** |
| * Schedule buffer swap at given vertical blank. |
| */ |
| int i915_vblank_swap(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_vblank_swap_t *swap = data; |
| drm_i915_vbl_swap_t *vbl_swap, *vbl_old; |
| unsigned int pipe, seqtype, curseq; |
| unsigned long irqflags; |
| struct list_head *list; |
| int ret; |
| |
| if (!dev_priv || !dev_priv->sarea_priv) { |
| DRM_ERROR("%s called with no initialization\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (dev_priv->sarea_priv->rotation) { |
| DRM_DEBUG("Rotation not supported\n"); |
| return -EINVAL; |
| } |
| |
| if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE | |
| _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) { |
| DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype); |
| return -EINVAL; |
| } |
| |
| pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; |
| |
| seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); |
| |
| if (!(dev_priv->vblank_pipe & (1 << pipe))) { |
| DRM_ERROR("Invalid pipe %d\n", pipe); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&dev->drw_lock, irqflags); |
| |
| if (!drm_get_drawable_info(dev, swap->drawable)) { |
| spin_unlock_irqrestore(&dev->drw_lock, irqflags); |
| DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable); |
| return -EINVAL; |
| } |
| |
| spin_unlock_irqrestore(&dev->drw_lock, irqflags); |
| |
| /* |
| * We take the ref here and put it when the swap actually completes |
| * in the tasklet. |
| */ |
| ret = drm_vblank_get(dev, pipe); |
| if (ret) |
| return ret; |
| curseq = drm_vblank_count(dev, pipe); |
| |
| if (seqtype == _DRM_VBLANK_RELATIVE) |
| swap->sequence += curseq; |
| |
| if ((curseq - swap->sequence) <= (1<<23)) { |
| if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) { |
| swap->sequence = curseq + 1; |
| } else { |
| DRM_DEBUG("Missed target sequence\n"); |
| drm_vblank_put(dev, pipe); |
| return -EINVAL; |
| } |
| } |
| |
| vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); |
| |
| if (!vbl_swap) { |
| DRM_ERROR("Failed to allocate memory to queue swap\n"); |
| drm_vblank_put(dev, pipe); |
| return -ENOMEM; |
| } |
| |
| vbl_swap->drw_id = swap->drawable; |
| vbl_swap->pipe = pipe; |
| vbl_swap->sequence = swap->sequence; |
| |
| spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); |
| |
| list_for_each(list, &dev_priv->vbl_swaps.head) { |
| vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); |
| |
| if (vbl_old->drw_id == swap->drawable && |
| vbl_old->pipe == pipe && |
| vbl_old->sequence == swap->sequence) { |
| spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); |
| drm_vblank_put(dev, pipe); |
| drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); |
| DRM_DEBUG("Already scheduled\n"); |
| return 0; |
| } |
| } |
| |
| if (dev_priv->swaps_pending >= 10) { |
| DRM_DEBUG("Too many swaps queued\n"); |
| DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", |
| drm_vblank_count(dev, 0), |
| drm_vblank_count(dev, 1)); |
| |
| list_for_each(list, &dev_priv->vbl_swaps.head) { |
| vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); |
| DRM_DEBUG("\tdrw %x pipe %d seq %x\n", |
| vbl_old->drw_id, vbl_old->pipe, |
| vbl_old->sequence); |
| } |
| spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); |
| drm_vblank_put(dev, pipe); |
| drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); |
| return -EBUSY; |
| } |
| |
| list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); |
| dev_priv->swaps_pending++; |
| |
| spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); |
| |
| return 0; |
| } |
| |
| /* drm_dma.h hooks |
| */ |
| void i915_driver_irq_preinstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| I915_WRITE(HWSTAM, 0xeffe); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| } |
| |
| int i915_driver_irq_postinstall(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| int ret, num_pipes = 2; |
| |
| spin_lock_init(&dev_priv->swaps_lock); |
| INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); |
| INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); |
| dev_priv->swaps_pending = 0; |
| |
| /* Set initial unmasked IRQs to just the selected vblank pipes. */ |
| dev_priv->irq_mask_reg = ~0; |
| |
| ret = drm_vblank_init(dev, num_pipes); |
| if (ret) |
| return ret; |
| |
| dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; |
| dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; |
| dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; |
| |
| dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ |
| |
| dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; |
| |
| I915_WRITE(IMR, dev_priv->irq_mask_reg); |
| I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); |
| (void) I915_READ(IER); |
| |
| opregion_enable_asle(dev); |
| DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); |
| |
| return 0; |
| } |
| |
| void i915_driver_irq_uninstall(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| u32 temp; |
| |
| if (!dev_priv) |
| return; |
| |
| dev_priv->vblank_pipe = 0; |
| |
| I915_WRITE(HWSTAM, 0xffffffff); |
| I915_WRITE(IMR, 0xffffffff); |
| I915_WRITE(IER, 0x0); |
| |
| temp = I915_READ(PIPEASTAT); |
| I915_WRITE(PIPEASTAT, temp); |
| temp = I915_READ(PIPEBSTAT); |
| I915_WRITE(PIPEBSTAT, temp); |
| temp = I915_READ(IIR); |
| I915_WRITE(IIR, temp); |
| } |