| /* |
| * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support |
| * |
| * Copyright (C) 2005 Yoshinori Sato |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/seqlock.h> |
| #include <asm/timer.h> |
| #include <asm/rtc.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/clock.h> |
| |
| #if defined(CONFIG_CPU_SUBTYPE_SH7619) |
| #define CMT_CMSTR 0xf84a0070 |
| #define CMT_CMCSR_0 0xf84a0072 |
| #define CMT_CMCNT_0 0xf84a0074 |
| #define CMT_CMCOR_0 0xf84a0076 |
| #define CMT_CMCSR_1 0xf84a0078 |
| #define CMT_CMCNT_1 0xf84a007a |
| #define CMT_CMCOR_1 0xf84a007c |
| |
| #define STBCR3 0xf80a0000 |
| #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) |
| #define CMT_CMCSR_INIT 0x0040 |
| #define CMT_CMCSR_CALIB 0x0000 |
| #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ |
| defined(CONFIG_CPU_SUBTYPE_SH7206) || \ |
| defined(CONFIG_CPU_SUBTYPE_SH7263) |
| #define CMT_CMSTR 0xfffec000 |
| #define CMT_CMCSR_0 0xfffec002 |
| #define CMT_CMCNT_0 0xfffec004 |
| #define CMT_CMCOR_0 0xfffec006 |
| |
| #define STBCR4 0xfffe040c |
| #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0) |
| #define CMT_CMCSR_INIT 0x0040 |
| #define CMT_CMCSR_CALIB 0x0000 |
| #else |
| #error "Unknown CPU SUBTYPE" |
| #endif |
| |
| static unsigned long cmt_timer_get_offset(void) |
| { |
| int count; |
| static unsigned short count_p = 0xffff; /* for the first call after boot */ |
| static unsigned long jiffies_p = 0; |
| |
| /* |
| * cache volatile jiffies temporarily; we have IRQs turned off. |
| */ |
| unsigned long jiffies_t; |
| |
| /* timer count may underflow right here */ |
| count = ctrl_inw(CMT_CMCOR_0); |
| count -= ctrl_inw(CMT_CMCNT_0); |
| |
| jiffies_t = jiffies; |
| |
| /* |
| * avoiding timer inconsistencies (they are rare, but they happen)... |
| * there is one kind of problem that must be avoided here: |
| * 1. the timer counter underflows |
| */ |
| |
| if (jiffies_t == jiffies_p) { |
| if (count > count_p) { |
| /* the nutcase */ |
| if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */ |
| count -= LATCH; |
| } else { |
| printk("%s (): hardware timer problem?\n", |
| __func__); |
| } |
| } |
| } else |
| jiffies_p = jiffies_t; |
| |
| count_p = count; |
| |
| count = ((LATCH-1) - count) * TICK_SIZE; |
| count = (count + LATCH/2) / LATCH; |
| |
| return count; |
| } |
| |
| static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id) |
| { |
| unsigned long timer_status; |
| |
| /* Clear CMF bit */ |
| timer_status = ctrl_inw(CMT_CMCSR_0); |
| timer_status &= ~0x80; |
| ctrl_outw(timer_status, CMT_CMCSR_0); |
| |
| handle_timer_tick(); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction cmt_irq = { |
| .name = "timer", |
| .handler = cmt_timer_interrupt, |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .mask = CPU_MASK_NONE, |
| }; |
| |
| static void cmt_clk_init(struct clk *clk) |
| { |
| u8 divisor = CMT_CMCSR_INIT & 0x3; |
| ctrl_inw(CMT_CMCSR_0); |
| ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0); |
| clk->parent = clk_get(NULL, "module_clk"); |
| clk->rate = clk->parent->rate / (8 << (divisor << 1)); |
| } |
| |
| static void cmt_clk_recalc(struct clk *clk) |
| { |
| u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3; |
| clk->rate = clk->parent->rate / (8 << (divisor << 1)); |
| } |
| |
| static struct clk_ops cmt_clk_ops = { |
| .init = cmt_clk_init, |
| .recalc = cmt_clk_recalc, |
| }; |
| |
| static struct clk cmt0_clk = { |
| .name = "cmt0_clk", |
| .ops = &cmt_clk_ops, |
| }; |
| |
| static int cmt_timer_start(void) |
| { |
| ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR); |
| return 0; |
| } |
| |
| static int cmt_timer_stop(void) |
| { |
| ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR); |
| return 0; |
| } |
| |
| static int cmt_timer_init(void) |
| { |
| unsigned long interval; |
| |
| cmt_clock_enable(); |
| |
| setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq); |
| |
| cmt0_clk.parent = clk_get(NULL, "module_clk"); |
| |
| cmt_timer_stop(); |
| |
| interval = cmt0_clk.parent->rate / 8 / HZ; |
| printk(KERN_INFO "Interval = %ld\n", interval); |
| |
| ctrl_outw(interval, CMT_CMCOR_0); |
| |
| clk_register(&cmt0_clk); |
| clk_enable(&cmt0_clk); |
| |
| cmt_timer_start(); |
| |
| return 0; |
| } |
| |
| static struct sys_timer_ops cmt_timer_ops = { |
| .init = cmt_timer_init, |
| .start = cmt_timer_start, |
| .stop = cmt_timer_stop, |
| #ifndef CONFIG_GENERIC_TIME |
| .get_offset = cmt_timer_get_offset, |
| #endif |
| }; |
| |
| struct sys_timer cmt_timer = { |
| .name = "cmt", |
| .ops = &cmt_timer_ops, |
| }; |