| /* |
| * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) |
| * Licensed under the GPL |
| */ |
| |
| #include "linux/stddef.h" |
| #include "linux/sched.h" |
| #include "linux/slab.h" |
| #include "linux/types.h" |
| #include "linux/errno.h" |
| #include "asm/uaccess.h" |
| #include "asm/smp.h" |
| #include "asm/ldt.h" |
| #include "asm/unistd.h" |
| #include "choose-mode.h" |
| #include "kern.h" |
| #include "mode_kern.h" |
| #include "os.h" |
| |
| extern int modify_ldt(int func, void *ptr, unsigned long bytecount); |
| |
| #ifdef CONFIG_MODE_TT |
| |
| static long do_modify_ldt_tt(int func, void __user *ptr, |
| unsigned long bytecount) |
| { |
| struct user_desc info; |
| int res = 0; |
| void *buf = NULL; |
| void *p = NULL; /* What we pass to host. */ |
| |
| switch(func){ |
| case 1: |
| case 0x11: /* write_ldt */ |
| /* Do this check now to avoid overflows. */ |
| if (bytecount != sizeof(struct user_desc)) { |
| res = -EINVAL; |
| goto out; |
| } |
| |
| if(copy_from_user(&info, ptr, sizeof(info))) { |
| res = -EFAULT; |
| goto out; |
| } |
| |
| p = &info; |
| break; |
| case 0: |
| case 2: /* read_ldt */ |
| |
| /* The use of info avoids kmalloc on the write case, not on the |
| * read one. */ |
| buf = kmalloc(bytecount, GFP_KERNEL); |
| if (!buf) { |
| res = -ENOMEM; |
| goto out; |
| } |
| p = buf; |
| break; |
| default: |
| res = -ENOSYS; |
| goto out; |
| } |
| |
| res = modify_ldt(func, p, bytecount); |
| if(res < 0) |
| goto out; |
| |
| switch(func){ |
| case 0: |
| case 2: |
| /* Modify_ldt was for reading and returned the number of read |
| * bytes.*/ |
| if(copy_to_user(ptr, p, res)) |
| res = -EFAULT; |
| break; |
| } |
| |
| out: |
| kfree(buf); |
| return res; |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_MODE_SKAS |
| |
| #include "skas.h" |
| #include "skas_ptrace.h" |
| #include "asm/mmu_context.h" |
| #include "proc_mm.h" |
| |
| long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc, |
| void **addr, int done) |
| { |
| long res; |
| |
| if(proc_mm){ |
| /* This is a special handling for the case, that the mm to |
| * modify isn't current->active_mm. |
| * If this is called directly by modify_ldt, |
| * (current->active_mm->context.skas.u == mm_idp) |
| * will be true. So no call to switch_mm_skas(mm_idp) is done. |
| * If this is called in case of init_new_ldt or PTRACE_LDT, |
| * mm_idp won't belong to current->active_mm, but child->mm. |
| * So we need to switch child's mm into our userspace, then |
| * later switch back. |
| * |
| * Note: I'm unsure: should interrupts be disabled here? |
| */ |
| if(!current->active_mm || current->active_mm == &init_mm || |
| mm_idp != ¤t->active_mm->context.skas.id) |
| switch_mm_skas(mm_idp); |
| } |
| |
| if(ptrace_ldt) { |
| struct ptrace_ldt ldt_op = (struct ptrace_ldt) { |
| .func = func, |
| .ptr = desc, |
| .bytecount = sizeof(*desc)}; |
| u32 cpu; |
| int pid; |
| |
| if(!proc_mm) |
| pid = mm_idp->u.pid; |
| else { |
| cpu = get_cpu(); |
| pid = userspace_pid[cpu]; |
| } |
| |
| res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op); |
| |
| if(proc_mm) |
| put_cpu(); |
| } |
| else { |
| void *stub_addr; |
| res = syscall_stub_data(mm_idp, (unsigned long *)desc, |
| (sizeof(*desc) + sizeof(long) - 1) & |
| ~(sizeof(long) - 1), |
| addr, &stub_addr); |
| if(!res){ |
| unsigned long args[] = { func, |
| (unsigned long)stub_addr, |
| sizeof(*desc), |
| 0, 0, 0 }; |
| res = run_syscall_stub(mm_idp, __NR_modify_ldt, args, |
| 0, addr, done); |
| } |
| } |
| |
| if(proc_mm){ |
| /* This is the second part of special handling, that makes |
| * PTRACE_LDT possible to implement. |
| */ |
| if(current->active_mm && current->active_mm != &init_mm && |
| mm_idp != ¤t->active_mm->context.skas.id) |
| switch_mm_skas(¤t->active_mm->context.skas.id); |
| } |
| |
| return res; |
| } |
| |
| static long read_ldt_from_host(void __user * ptr, unsigned long bytecount) |
| { |
| int res, n; |
| struct ptrace_ldt ptrace_ldt = (struct ptrace_ldt) { |
| .func = 0, |
| .bytecount = bytecount, |
| .ptr = (void *)kmalloc(bytecount, GFP_KERNEL)}; |
| u32 cpu; |
| |
| if(ptrace_ldt.ptr == NULL) |
| return -ENOMEM; |
| |
| /* This is called from sys_modify_ldt only, so userspace_pid gives |
| * us the right number |
| */ |
| |
| cpu = get_cpu(); |
| res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt); |
| put_cpu(); |
| if(res < 0) |
| goto out; |
| |
| n = copy_to_user(ptr, ptrace_ldt.ptr, res); |
| if(n != 0) |
| res = -EFAULT; |
| |
| out: |
| kfree(ptrace_ldt.ptr); |
| |
| return res; |
| } |
| |
| /* |
| * In skas mode, we hold our own ldt data in UML. |
| * Thus, the code implementing sys_modify_ldt_skas |
| * is very similar to (and mostly stolen from) sys_modify_ldt |
| * for arch/i386/kernel/ldt.c |
| * The routines copied and modified in part are: |
| * - read_ldt |
| * - read_default_ldt |
| * - write_ldt |
| * - sys_modify_ldt_skas |
| */ |
| |
| static int read_ldt(void __user * ptr, unsigned long bytecount) |
| { |
| int i, err = 0; |
| unsigned long size; |
| uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; |
| |
| if(!ldt->entry_count) |
| goto out; |
| if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES) |
| bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES; |
| err = bytecount; |
| |
| if(ptrace_ldt){ |
| return read_ldt_from_host(ptr, bytecount); |
| } |
| |
| down(&ldt->semaphore); |
| if(ldt->entry_count <= LDT_DIRECT_ENTRIES){ |
| size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES; |
| if(size > bytecount) |
| size = bytecount; |
| if(copy_to_user(ptr, ldt->u.entries, size)) |
| err = -EFAULT; |
| bytecount -= size; |
| ptr += size; |
| } |
| else { |
| for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount; |
| i++){ |
| size = PAGE_SIZE; |
| if(size > bytecount) |
| size = bytecount; |
| if(copy_to_user(ptr, ldt->u.pages[i], size)){ |
| err = -EFAULT; |
| break; |
| } |
| bytecount -= size; |
| ptr += size; |
| } |
| } |
| up(&ldt->semaphore); |
| |
| if(bytecount == 0 || err == -EFAULT) |
| goto out; |
| |
| if(clear_user(ptr, bytecount)) |
| err = -EFAULT; |
| |
| out: |
| return err; |
| } |
| |
| static int read_default_ldt(void __user * ptr, unsigned long bytecount) |
| { |
| int err; |
| |
| if(bytecount > 5*LDT_ENTRY_SIZE) |
| bytecount = 5*LDT_ENTRY_SIZE; |
| |
| err = bytecount; |
| /* UML doesn't support lcall7 and lcall27. |
| * So, we don't really have a default ldt, but emulate |
| * an empty ldt of common host default ldt size. |
| */ |
| if(clear_user(ptr, bytecount)) |
| err = -EFAULT; |
| |
| return err; |
| } |
| |
| static int write_ldt(void __user * ptr, unsigned long bytecount, int func) |
| { |
| uml_ldt_t * ldt = ¤t->mm->context.skas.ldt; |
| struct mm_id * mm_idp = ¤t->mm->context.skas.id; |
| int i, err; |
| struct user_desc ldt_info; |
| struct ldt_entry entry0, *ldt_p; |
| void *addr = NULL; |
| |
| err = -EINVAL; |
| if(bytecount != sizeof(ldt_info)) |
| goto out; |
| err = -EFAULT; |
| if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info))) |
| goto out; |
| |
| err = -EINVAL; |
| if(ldt_info.entry_number >= LDT_ENTRIES) |
| goto out; |
| if(ldt_info.contents == 3){ |
| if (func == 1) |
| goto out; |
| if (ldt_info.seg_not_present == 0) |
| goto out; |
| } |
| |
| if(!ptrace_ldt) |
| down(&ldt->semaphore); |
| |
| err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1); |
| if(err) |
| goto out_unlock; |
| else if(ptrace_ldt) { |
| /* With PTRACE_LDT available, this is used as a flag only */ |
| ldt->entry_count = 1; |
| goto out; |
| } |
| |
| if(ldt_info.entry_number >= ldt->entry_count && |
| ldt_info.entry_number >= LDT_DIRECT_ENTRIES){ |
| for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE; |
| i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number; |
| i++){ |
| if(i == 0) |
| memcpy(&entry0, ldt->u.entries, |
| sizeof(entry0)); |
| ldt->u.pages[i] = (struct ldt_entry *) |
| __get_free_page(GFP_KERNEL|__GFP_ZERO); |
| if(!ldt->u.pages[i]){ |
| err = -ENOMEM; |
| /* Undo the change in host */ |
| memset(&ldt_info, 0, sizeof(ldt_info)); |
| write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1); |
| goto out_unlock; |
| } |
| if(i == 0) { |
| memcpy(ldt->u.pages[0], &entry0, |
| sizeof(entry0)); |
| memcpy(ldt->u.pages[0]+1, ldt->u.entries+1, |
| sizeof(entry0)*(LDT_DIRECT_ENTRIES-1)); |
| } |
| ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE; |
| } |
| } |
| if(ldt->entry_count <= ldt_info.entry_number) |
| ldt->entry_count = ldt_info.entry_number + 1; |
| |
| if(ldt->entry_count <= LDT_DIRECT_ENTRIES) |
| ldt_p = ldt->u.entries + ldt_info.entry_number; |
| else |
| ldt_p = ldt->u.pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] + |
| ldt_info.entry_number%LDT_ENTRIES_PER_PAGE; |
| |
| if(ldt_info.base_addr == 0 && ldt_info.limit == 0 && |
| (func == 1 || LDT_empty(&ldt_info))){ |
| ldt_p->a = 0; |
| ldt_p->b = 0; |
| } |
| else{ |
| if (func == 1) |
| ldt_info.useable = 0; |
| ldt_p->a = LDT_entry_a(&ldt_info); |
| ldt_p->b = LDT_entry_b(&ldt_info); |
| } |
| err = 0; |
| |
| out_unlock: |
| up(&ldt->semaphore); |
| out: |
| return err; |
| } |
| |
| static long do_modify_ldt_skas(int func, void __user *ptr, |
| unsigned long bytecount) |
| { |
| int ret = -ENOSYS; |
| |
| switch (func) { |
| case 0: |
| ret = read_ldt(ptr, bytecount); |
| break; |
| case 1: |
| case 0x11: |
| ret = write_ldt(ptr, bytecount, func); |
| break; |
| case 2: |
| ret = read_default_ldt(ptr, bytecount); |
| break; |
| } |
| return ret; |
| } |
| |
| short dummy_list[9] = {0, -1}; |
| short * host_ldt_entries = NULL; |
| |
| void ldt_get_host_info(void) |
| { |
| long ret; |
| struct ldt_entry * ldt; |
| int i, size, k, order; |
| |
| host_ldt_entries = dummy_list+1; |
| |
| for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++); |
| |
| ldt = (struct ldt_entry *) |
| __get_free_pages(GFP_KERNEL|__GFP_ZERO, order); |
| if(ldt == NULL) { |
| printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n"); |
| return; |
| } |
| |
| ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE); |
| if(ret < 0) { |
| printk("ldt_get_host_info: couldn't read host ldt\n"); |
| goto out_free; |
| } |
| if(ret == 0) { |
| /* default_ldt is active, simply write an empty entry 0 */ |
| host_ldt_entries = dummy_list; |
| goto out_free; |
| } |
| |
| for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){ |
| if(ldt[i].a != 0 || ldt[i].b != 0) |
| size++; |
| } |
| |
| if(size < ARRAY_SIZE(dummy_list)) |
| host_ldt_entries = dummy_list; |
| else { |
| size = (size + 1) * sizeof(dummy_list[0]); |
| host_ldt_entries = (short *)kmalloc(size, GFP_KERNEL); |
| if(host_ldt_entries == NULL) { |
| printk("ldt_get_host_info: couldn't allocate host ldt list\n"); |
| goto out_free; |
| } |
| } |
| |
| for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){ |
| if(ldt[i].a != 0 || ldt[i].b != 0) { |
| host_ldt_entries[k++] = i; |
| } |
| } |
| host_ldt_entries[k] = -1; |
| |
| out_free: |
| free_pages((unsigned long)ldt, order); |
| } |
| |
| long init_new_ldt(struct mmu_context_skas * new_mm, |
| struct mmu_context_skas * from_mm) |
| { |
| struct user_desc desc; |
| short * num_p; |
| int i; |
| long page, err=0; |
| void *addr = NULL; |
| struct proc_mm_op copy; |
| |
| |
| if(!ptrace_ldt) |
| init_MUTEX(&new_mm->ldt.semaphore); |
| |
| if(!from_mm){ |
| memset(&desc, 0, sizeof(desc)); |
| /* |
| * We have to initialize a clean ldt. |
| */ |
| if(proc_mm) { |
| /* |
| * If the new mm was created using proc_mm, host's |
| * default-ldt currently is assigned, which normally |
| * contains the call-gates for lcall7 and lcall27. |
| * To remove these gates, we simply write an empty |
| * entry as number 0 to the host. |
| */ |
| err = write_ldt_entry(&new_mm->id, 1, &desc, |
| &addr, 1); |
| } |
| else{ |
| /* |
| * Now we try to retrieve info about the ldt, we |
| * inherited from the host. All ldt-entries found |
| * will be reset in the following loop |
| */ |
| if(host_ldt_entries == NULL) |
| ldt_get_host_info(); |
| for(num_p=host_ldt_entries; *num_p != -1; num_p++){ |
| desc.entry_number = *num_p; |
| err = write_ldt_entry(&new_mm->id, 1, &desc, |
| &addr, *(num_p + 1) == -1); |
| if(err) |
| break; |
| } |
| } |
| new_mm->ldt.entry_count = 0; |
| |
| goto out; |
| } |
| |
| if(proc_mm){ |
| /* We have a valid from_mm, so we now have to copy the LDT of |
| * from_mm to new_mm, because using proc_mm an new mm with |
| * an empty/default LDT was created in new_mm() |
| */ |
| copy = ((struct proc_mm_op) { .op = MM_COPY_SEGMENTS, |
| .u = |
| { .copy_segments = |
| from_mm->id.u.mm_fd } } ); |
| i = os_write_file(new_mm->id.u.mm_fd, ©, sizeof(copy)); |
| if(i != sizeof(copy)) |
| printk("new_mm : /proc/mm copy_segments failed, " |
| "err = %d\n", -i); |
| } |
| |
| if(!ptrace_ldt) { |
| /* Our local LDT is used to supply the data for |
| * modify_ldt(READLDT), if PTRACE_LDT isn't available, |
| * i.e., we have to use the stub for modify_ldt, which |
| * can't handle the big read buffer of up to 64kB. |
| */ |
| down(&from_mm->ldt.semaphore); |
| if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){ |
| memcpy(new_mm->ldt.u.entries, from_mm->ldt.u.entries, |
| sizeof(new_mm->ldt.u.entries)); |
| } |
| else{ |
| i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; |
| while(i-->0){ |
| page = __get_free_page(GFP_KERNEL|__GFP_ZERO); |
| if (!page){ |
| err = -ENOMEM; |
| break; |
| } |
| new_mm->ldt.u.pages[i] = |
| (struct ldt_entry *) page; |
| memcpy(new_mm->ldt.u.pages[i], |
| from_mm->ldt.u.pages[i], PAGE_SIZE); |
| } |
| } |
| new_mm->ldt.entry_count = from_mm->ldt.entry_count; |
| up(&from_mm->ldt.semaphore); |
| } |
| |
| out: |
| return err; |
| } |
| |
| |
| void free_ldt(struct mmu_context_skas * mm) |
| { |
| int i; |
| |
| if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){ |
| i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE; |
| while(i-- > 0){ |
| free_page((long )mm->ldt.u.pages[i]); |
| } |
| } |
| mm->ldt.entry_count = 0; |
| } |
| #endif |
| |
| int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount) |
| { |
| return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func, |
| ptr, bytecount)); |
| } |