| /* |
| * linux/arch/arm/mach-realview/realview_eb.c |
| * |
| * Copyright (C) 2004 ARM Limited |
| * Copyright (C) 2000 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/device.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/pl061.h> |
| #include <linux/amba/mmci.h> |
| #include <linux/amba/pl022.h> |
| #include <linux/io.h> |
| #include <linux/irqchip/arm-gic.h> |
| #include <linux/platform_data/clk-realview.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/mach-types.h> |
| #include <asm/pgtable.h> |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/smp_twd.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| #include <mach/board-eb.h> |
| #include <mach/irqs.h> |
| |
| #include "core.h" |
| |
| static struct map_desc realview_eb_io_desc[] __initdata = { |
| { |
| .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| }, |
| #ifdef CONFIG_DEBUG_LL |
| { |
| .virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE, |
| } |
| #endif |
| }; |
| |
| static struct map_desc realview_eb11mp_io_desc[] __initdata = { |
| { |
| .virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE), |
| .length = REALVIEW_EB11MP_PRIV_MEM_SIZE, |
| .type = MT_DEVICE, |
| }, { |
| .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), |
| .pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE), |
| .length = SZ_8K, |
| .type = MT_DEVICE, |
| } |
| }; |
| |
| static void __init realview_eb_map_io(void) |
| { |
| iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); |
| if (core_tile_eb11mp() || core_tile_a9mp()) |
| iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc)); |
| } |
| |
| static struct pl061_platform_data gpio0_plat_data = { |
| .gpio_base = 0, |
| }; |
| |
| static struct pl061_platform_data gpio1_plat_data = { |
| .gpio_base = 8, |
| }; |
| |
| static struct pl061_platform_data gpio2_plat_data = { |
| .gpio_base = 16, |
| }; |
| |
| static struct pl022_ssp_controller ssp0_plat_data = { |
| .bus_id = 0, |
| .enable_dma = 0, |
| .num_chipselect = 1, |
| }; |
| |
| /* |
| * RealView EB AMBA devices |
| */ |
| |
| /* |
| * These devices are connected via the core APB bridge |
| */ |
| #define GPIO2_IRQ { IRQ_EB_GPIO2 } |
| #define GPIO3_IRQ { IRQ_EB_GPIO3 } |
| |
| #define AACI_IRQ { IRQ_EB_AACI } |
| #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } |
| #define KMI0_IRQ { IRQ_EB_KMI0 } |
| #define KMI1_IRQ { IRQ_EB_KMI1 } |
| |
| /* |
| * These devices are connected directly to the multi-layer AHB switch |
| */ |
| #define EB_SMC_IRQ { } |
| #define MPMC_IRQ { } |
| #define EB_CLCD_IRQ { IRQ_EB_CLCD } |
| #define DMAC_IRQ { IRQ_EB_DMA } |
| |
| /* |
| * These devices are connected via the core APB bridge |
| */ |
| #define SCTL_IRQ { } |
| #define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } |
| #define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } |
| #define GPIO1_IRQ { IRQ_EB_GPIO1 } |
| #define EB_RTC_IRQ { IRQ_EB_RTC } |
| |
| /* |
| * These devices are connected via the DMA APB bridge |
| */ |
| #define SCI_IRQ { IRQ_EB_SCI } |
| #define EB_UART0_IRQ { IRQ_EB_UART0 } |
| #define EB_UART1_IRQ { IRQ_EB_UART1 } |
| #define EB_UART2_IRQ { IRQ_EB_UART2 } |
| #define EB_UART3_IRQ { IRQ_EB_UART3 } |
| #define EB_SSP_IRQ { IRQ_EB_SSP } |
| |
| /* FPGA Primecells */ |
| APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); |
| APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); |
| APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); |
| APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); |
| APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); |
| |
| /* DevChip Primecells */ |
| AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); |
| AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); |
| AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); |
| AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); |
| APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); |
| APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); |
| APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); |
| APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); |
| APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); |
| APB_DEVICE(sci0, "dev:sci0", SCI, NULL); |
| APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); |
| APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); |
| APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); |
| APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); |
| |
| static struct amba_device *amba_devs[] __initdata = { |
| &dmac_device, |
| &uart0_device, |
| &uart1_device, |
| &uart2_device, |
| &uart3_device, |
| &smc_device, |
| &clcd_device, |
| &sctl_device, |
| &wdog_device, |
| &gpio0_device, |
| &gpio1_device, |
| &gpio2_device, |
| &rtc_device, |
| &sci0_device, |
| &ssp0_device, |
| &aaci_device, |
| &mmc0_device, |
| &kmi0_device, |
| &kmi1_device, |
| }; |
| |
| /* |
| * RealView EB platform devices |
| */ |
| static struct resource realview_eb_flash_resource = { |
| .start = REALVIEW_EB_FLASH_BASE, |
| .end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct resource realview_eb_eth_resources[] = { |
| [0] = { |
| .start = REALVIEW_EB_ETH_BASE, |
| .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_EB_ETH, |
| .end = IRQ_EB_ETH, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| /* |
| * Detect and register the correct Ethernet device. RealView/EB rev D |
| * platforms use the newer SMSC LAN9118 Ethernet chip |
| */ |
| static int eth_device_register(void) |
| { |
| void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K); |
| const char *name = NULL; |
| u32 idrev; |
| |
| if (!eth_addr) |
| return -ENOMEM; |
| |
| idrev = readl(eth_addr + 0x50); |
| if ((idrev & 0xFFFF0000) != 0x01180000) |
| /* SMSC LAN9118 not present, use LAN91C111 instead */ |
| name = "smc91x"; |
| |
| iounmap(eth_addr); |
| return realview_eth_register(name, realview_eb_eth_resources); |
| } |
| |
| static struct resource realview_eb_isp1761_resources[] = { |
| [0] = { |
| .start = REALVIEW_EB_USB_BASE, |
| .end = REALVIEW_EB_USB_BASE + SZ_128K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_EB_USB, |
| .end = IRQ_EB_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource pmu_resources[] = { |
| [0] = { |
| .start = IRQ_EB11MP_PMU_CPU0, |
| .end = IRQ_EB11MP_PMU_CPU0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [1] = { |
| .start = IRQ_EB11MP_PMU_CPU1, |
| .end = IRQ_EB11MP_PMU_CPU1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = IRQ_EB11MP_PMU_CPU2, |
| .end = IRQ_EB11MP_PMU_CPU2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .start = IRQ_EB11MP_PMU_CPU3, |
| .end = IRQ_EB11MP_PMU_CPU3, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device pmu_device = { |
| .name = "arm-pmu", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(pmu_resources), |
| .resource = pmu_resources, |
| }; |
| |
| static struct resource char_lcd_resources[] = { |
| { |
| .start = REALVIEW_CHAR_LCD_BASE, |
| .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = IRQ_EB_CHARLCD, |
| .end = IRQ_EB_CHARLCD, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device char_lcd_device = { |
| .name = "arm-charlcd", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(char_lcd_resources), |
| .resource = char_lcd_resources, |
| }; |
| |
| static void __init gic_init_irq(void) |
| { |
| if (core_tile_eb11mp() || core_tile_a9mp()) { |
| unsigned int pldctrl; |
| |
| /* new irq mode */ |
| writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); |
| pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); |
| pldctrl |= 0x00800000; |
| writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); |
| writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); |
| |
| /* core tile GIC, primary */ |
| gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), |
| __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); |
| |
| #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB |
| /* board GIC, secondary */ |
| gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE), |
| __io_address(REALVIEW_EB_GIC_CPU_BASE)); |
| gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); |
| #endif |
| } else { |
| /* board GIC, primary */ |
| gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE), |
| __io_address(REALVIEW_EB_GIC_CPU_BASE)); |
| } |
| } |
| |
| /* |
| * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile |
| */ |
| static void realview_eb11mp_fixup(void) |
| { |
| /* AMBA devices */ |
| dmac_device.irq[0] = IRQ_EB11MP_DMA; |
| uart0_device.irq[0] = IRQ_EB11MP_UART0; |
| uart1_device.irq[0] = IRQ_EB11MP_UART1; |
| uart2_device.irq[0] = IRQ_EB11MP_UART2; |
| uart3_device.irq[0] = IRQ_EB11MP_UART3; |
| clcd_device.irq[0] = IRQ_EB11MP_CLCD; |
| wdog_device.irq[0] = IRQ_EB11MP_WDOG; |
| gpio0_device.irq[0] = IRQ_EB11MP_GPIO0; |
| gpio1_device.irq[0] = IRQ_EB11MP_GPIO1; |
| gpio2_device.irq[0] = IRQ_EB11MP_GPIO2; |
| rtc_device.irq[0] = IRQ_EB11MP_RTC; |
| sci0_device.irq[0] = IRQ_EB11MP_SCI; |
| ssp0_device.irq[0] = IRQ_EB11MP_SSP; |
| aaci_device.irq[0] = IRQ_EB11MP_AACI; |
| mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A; |
| mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B; |
| kmi0_device.irq[0] = IRQ_EB11MP_KMI0; |
| kmi1_device.irq[0] = IRQ_EB11MP_KMI1; |
| |
| /* platform devices */ |
| realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH; |
| realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH; |
| realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB; |
| realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB; |
| } |
| |
| #ifdef CONFIG_HAVE_ARM_TWD |
| static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, |
| REALVIEW_EB11MP_TWD_BASE, |
| IRQ_LOCALTIMER); |
| |
| static void __init realview_eb_twd_init(void) |
| { |
| if (core_tile_eb11mp() || core_tile_a9mp()) { |
| int err = twd_local_timer_register(&twd_local_timer); |
| if (err) |
| pr_err("twd_local_timer_register failed %d\n", err); |
| } |
| } |
| #else |
| #define realview_eb_twd_init() do { } while(0) |
| #endif |
| |
| static void __init realview_eb_timer_init(void) |
| { |
| unsigned int timer_irq; |
| |
| timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE); |
| timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20; |
| timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); |
| timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; |
| |
| if (core_tile_eb11mp() || core_tile_a9mp()) |
| timer_irq = IRQ_EB11MP_TIMER0_1; |
| else |
| timer_irq = IRQ_EB_TIMER0_1; |
| |
| realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); |
| realview_timer_init(timer_irq); |
| realview_eb_twd_init(); |
| } |
| |
| static void realview_eb_restart(char mode, const char *cmd) |
| { |
| void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); |
| void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); |
| |
| /* |
| * To reset, we hit the on-board reset register |
| * in the system FPGA |
| */ |
| __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); |
| if (core_tile_eb11mp()) |
| __raw_writel(0x0008, reset_ctrl); |
| dsb(); |
| } |
| |
| static void __init realview_eb_init(void) |
| { |
| int i; |
| |
| if (core_tile_eb11mp() || core_tile_a9mp()) { |
| realview_eb11mp_fixup(); |
| |
| #ifdef CONFIG_CACHE_L2X0 |
| /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled |
| * Bits: .... ...0 0111 1001 0000 .... .... .... */ |
| l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); |
| #endif |
| platform_device_register(&pmu_device); |
| } |
| |
| realview_flash_register(&realview_eb_flash_resource, 1); |
| platform_device_register(&realview_i2c_device); |
| platform_device_register(&char_lcd_device); |
| eth_device_register(); |
| realview_usb_register(realview_eb_isp1761_resources); |
| |
| for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { |
| struct amba_device *d = amba_devs[i]; |
| amba_device_register(d, &iomem_resource); |
| } |
| } |
| |
| MACHINE_START(REALVIEW_EB, "ARM-RealView EB") |
| /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ |
| .atag_offset = 0x100, |
| .smp = smp_ops(realview_smp_ops), |
| .fixup = realview_fixup, |
| .map_io = realview_eb_map_io, |
| .init_early = realview_init_early, |
| .init_irq = gic_init_irq, |
| .init_time = realview_eb_timer_init, |
| .init_machine = realview_eb_init, |
| #ifdef CONFIG_ZONE_DMA |
| .dma_zone_size = SZ_256M, |
| #endif |
| .restart = realview_eb_restart, |
| MACHINE_END |