| /* |
| ivtv firmware functions. |
| Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com> |
| Copyright (C) 2004 Chris Kennedy <c@groovy.org> |
| Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include "ivtv-driver.h" |
| #include "ivtv-mailbox.h" |
| #include "ivtv-firmware.h" |
| #include "ivtv-yuv.h" |
| #include "ivtv-ioctl.h" |
| #include "ivtv-cards.h" |
| #include <linux/firmware.h> |
| #include <media/saa7127.h> |
| |
| #define IVTV_MASK_SPU_ENABLE 0xFFFFFFFE |
| #define IVTV_MASK_VPU_ENABLE15 0xFFFFFFF6 |
| #define IVTV_MASK_VPU_ENABLE16 0xFFFFFFFB |
| #define IVTV_CMD_VDM_STOP 0x00000000 |
| #define IVTV_CMD_AO_STOP 0x00000005 |
| #define IVTV_CMD_APU_PING 0x00000000 |
| #define IVTV_CMD_VPU_STOP15 0xFFFFFFFE |
| #define IVTV_CMD_VPU_STOP16 0xFFFFFFEE |
| #define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF |
| #define IVTV_CMD_SPU_STOP 0x00000001 |
| #define IVTV_CMD_SDRAM_PRECHARGE_INIT 0x0000001A |
| #define IVTV_CMD_SDRAM_REFRESH_INIT 0x80000640 |
| #define IVTV_SDRAM_SLEEPTIME 600 |
| |
| #define IVTV_DECODE_INIT_MPEG_FILENAME "v4l-cx2341x-init.mpg" |
| #define IVTV_DECODE_INIT_MPEG_SIZE (152*1024) |
| |
| /* Encoder/decoder firmware sizes */ |
| #define IVTV_FW_ENC_SIZE (376836) |
| #define IVTV_FW_DEC_SIZE (256*1024) |
| |
| static int load_fw_direct(const char *fn, volatile u8 __iomem *mem, struct ivtv *itv, long size) |
| { |
| const struct firmware *fw = NULL; |
| int retries = 3; |
| |
| retry: |
| if (retries && request_firmware(&fw, fn, &itv->pdev->dev) == 0) { |
| int i; |
| volatile u32 __iomem *dst = (volatile u32 __iomem *)mem; |
| const u32 *src = (const u32 *)fw->data; |
| |
| if (fw->size != size) { |
| /* Due to race conditions in firmware loading (esp. with udev <0.95) |
| the wrong file was sometimes loaded. So we check filesizes to |
| see if at least the right-sized file was loaded. If not, then we |
| retry. */ |
| IVTV_INFO("Retry: file loaded was not %s (expected size %ld, got %zd)\n", fn, size, fw->size); |
| release_firmware(fw); |
| retries--; |
| goto retry; |
| } |
| for (i = 0; i < fw->size; i += 4) { |
| /* no need for endianness conversion on the ppc */ |
| __raw_writel(*src, dst); |
| dst++; |
| src++; |
| } |
| IVTV_INFO("Loaded %s firmware (%zd bytes)\n", fn, fw->size); |
| release_firmware(fw); |
| return size; |
| } |
| IVTV_ERR("Unable to open firmware %s (must be %ld bytes)\n", fn, size); |
| IVTV_ERR("Did you put the firmware in the hotplug firmware directory?\n"); |
| return -ENOMEM; |
| } |
| |
| void ivtv_halt_firmware(struct ivtv *itv) |
| { |
| IVTV_DEBUG_INFO("Preparing for firmware halt.\n"); |
| if (itv->has_cx23415 && itv->dec_mbox.mbox) |
| ivtv_vapi(itv, CX2341X_DEC_HALT_FW, 0); |
| if (itv->enc_mbox.mbox) |
| ivtv_vapi(itv, CX2341X_ENC_HALT_FW, 0); |
| |
| ivtv_msleep_timeout(10, 0); |
| itv->enc_mbox.mbox = itv->dec_mbox.mbox = NULL; |
| |
| IVTV_DEBUG_INFO("Stopping VDM\n"); |
| write_reg(IVTV_CMD_VDM_STOP, IVTV_REG_VDM); |
| |
| IVTV_DEBUG_INFO("Stopping AO\n"); |
| write_reg(IVTV_CMD_AO_STOP, IVTV_REG_AO); |
| |
| IVTV_DEBUG_INFO("pinging (?) APU\n"); |
| write_reg(IVTV_CMD_APU_PING, IVTV_REG_APU); |
| |
| IVTV_DEBUG_INFO("Stopping VPU\n"); |
| if (!itv->has_cx23415) |
| write_reg(IVTV_CMD_VPU_STOP16, IVTV_REG_VPU); |
| else |
| write_reg(IVTV_CMD_VPU_STOP15, IVTV_REG_VPU); |
| |
| IVTV_DEBUG_INFO("Resetting Hw Blocks\n"); |
| write_reg(IVTV_CMD_HW_BLOCKS_RST, IVTV_REG_HW_BLOCKS); |
| |
| IVTV_DEBUG_INFO("Stopping SPU\n"); |
| write_reg(IVTV_CMD_SPU_STOP, IVTV_REG_SPU); |
| |
| ivtv_msleep_timeout(10, 0); |
| |
| IVTV_DEBUG_INFO("init Encoder SDRAM pre-charge\n"); |
| write_reg(IVTV_CMD_SDRAM_PRECHARGE_INIT, IVTV_REG_ENC_SDRAM_PRECHARGE); |
| |
| IVTV_DEBUG_INFO("init Encoder SDRAM refresh to 1us\n"); |
| write_reg(IVTV_CMD_SDRAM_REFRESH_INIT, IVTV_REG_ENC_SDRAM_REFRESH); |
| |
| if (itv->has_cx23415) { |
| IVTV_DEBUG_INFO("init Decoder SDRAM pre-charge\n"); |
| write_reg(IVTV_CMD_SDRAM_PRECHARGE_INIT, IVTV_REG_DEC_SDRAM_PRECHARGE); |
| |
| IVTV_DEBUG_INFO("init Decoder SDRAM refresh to 1us\n"); |
| write_reg(IVTV_CMD_SDRAM_REFRESH_INIT, IVTV_REG_DEC_SDRAM_REFRESH); |
| } |
| |
| IVTV_DEBUG_INFO("Sleeping for %dms\n", IVTV_SDRAM_SLEEPTIME); |
| ivtv_msleep_timeout(IVTV_SDRAM_SLEEPTIME, 0); |
| } |
| |
| void ivtv_firmware_versions(struct ivtv *itv) |
| { |
| u32 data[CX2341X_MBOX_MAX_DATA]; |
| |
| /* Encoder */ |
| ivtv_vapi_result(itv, data, CX2341X_ENC_GET_VERSION, 0); |
| IVTV_INFO("Encoder revision: 0x%08x\n", data[0]); |
| |
| if (data[0] != 0x02060039) |
| IVTV_WARN("Recommended firmware version is 0x02060039.\n"); |
| |
| if (itv->has_cx23415) { |
| /* Decoder */ |
| ivtv_vapi_result(itv, data, CX2341X_DEC_GET_VERSION, 0); |
| IVTV_INFO("Decoder revision: 0x%08x\n", data[0]); |
| } |
| } |
| |
| static int ivtv_firmware_copy(struct ivtv *itv) |
| { |
| IVTV_DEBUG_INFO("Loading encoder image\n"); |
| if (load_fw_direct(CX2341X_FIRM_ENC_FILENAME, |
| itv->enc_mem, itv, IVTV_FW_ENC_SIZE) != IVTV_FW_ENC_SIZE) { |
| IVTV_DEBUG_WARN("failed loading encoder firmware\n"); |
| return -3; |
| } |
| if (!itv->has_cx23415) |
| return 0; |
| |
| IVTV_DEBUG_INFO("Loading decoder image\n"); |
| if (load_fw_direct(CX2341X_FIRM_DEC_FILENAME, |
| itv->dec_mem, itv, IVTV_FW_DEC_SIZE) != IVTV_FW_DEC_SIZE) { |
| IVTV_DEBUG_WARN("failed loading decoder firmware\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static volatile struct ivtv_mailbox __iomem *ivtv_search_mailbox(const volatile u8 __iomem *mem, u32 size) |
| { |
| int i; |
| |
| /* mailbox is preceded by a 16 byte 'magic cookie' starting at a 256-byte |
| address boundary */ |
| for (i = 0; i < size; i += 0x100) { |
| if (readl(mem + i) == 0x12345678 && |
| readl(mem + i + 4) == 0x34567812 && |
| readl(mem + i + 8) == 0x56781234 && |
| readl(mem + i + 12) == 0x78123456) { |
| return (volatile struct ivtv_mailbox __iomem *)(mem + i + 16); |
| } |
| } |
| return NULL; |
| } |
| |
| int ivtv_firmware_init(struct ivtv *itv) |
| { |
| int err; |
| |
| ivtv_halt_firmware(itv); |
| |
| /* load firmware */ |
| err = ivtv_firmware_copy(itv); |
| if (err) { |
| IVTV_DEBUG_WARN("Error %d loading firmware\n", err); |
| return err; |
| } |
| |
| /* start firmware */ |
| write_reg(read_reg(IVTV_REG_SPU) & IVTV_MASK_SPU_ENABLE, IVTV_REG_SPU); |
| ivtv_msleep_timeout(100, 0); |
| if (itv->has_cx23415) |
| write_reg(read_reg(IVTV_REG_VPU) & IVTV_MASK_VPU_ENABLE15, IVTV_REG_VPU); |
| else |
| write_reg(read_reg(IVTV_REG_VPU) & IVTV_MASK_VPU_ENABLE16, IVTV_REG_VPU); |
| ivtv_msleep_timeout(100, 0); |
| |
| /* find mailboxes and ping firmware */ |
| itv->enc_mbox.mbox = ivtv_search_mailbox(itv->enc_mem, IVTV_ENCODER_SIZE); |
| if (itv->enc_mbox.mbox == NULL) |
| IVTV_ERR("Encoder mailbox not found\n"); |
| else if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0)) { |
| IVTV_ERR("Encoder firmware dead!\n"); |
| itv->enc_mbox.mbox = NULL; |
| } |
| if (itv->enc_mbox.mbox == NULL) |
| return -ENODEV; |
| |
| if (!itv->has_cx23415) |
| return 0; |
| |
| itv->dec_mbox.mbox = ivtv_search_mailbox(itv->dec_mem, IVTV_DECODER_SIZE); |
| if (itv->dec_mbox.mbox == NULL) { |
| IVTV_ERR("Decoder mailbox not found\n"); |
| } else if (itv->has_cx23415 && ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0)) { |
| IVTV_ERR("Decoder firmware dead!\n"); |
| itv->dec_mbox.mbox = NULL; |
| } else { |
| /* Firmware okay, so check yuv output filter table */ |
| ivtv_yuv_filter_check(itv); |
| } |
| return itv->dec_mbox.mbox ? 0 : -ENODEV; |
| } |
| |
| void ivtv_init_mpeg_decoder(struct ivtv *itv) |
| { |
| u32 data[CX2341X_MBOX_MAX_DATA]; |
| long readbytes; |
| volatile u8 __iomem *mem_offset; |
| |
| data[0] = 0; |
| data[1] = itv->cxhdl.width; /* YUV source width */ |
| data[2] = itv->cxhdl.height; |
| data[3] = itv->cxhdl.audio_properties; /* Audio settings to use, |
| bitmap. see docs. */ |
| if (ivtv_api(itv, CX2341X_DEC_SET_DECODER_SOURCE, 4, data)) { |
| IVTV_ERR("ivtv_init_mpeg_decoder failed to set decoder source\n"); |
| return; |
| } |
| |
| if (ivtv_vapi(itv, CX2341X_DEC_START_PLAYBACK, 2, 0, 1) != 0) { |
| IVTV_ERR("ivtv_init_mpeg_decoder failed to start playback\n"); |
| return; |
| } |
| ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, 2, data); |
| mem_offset = itv->dec_mem + data[1]; |
| |
| if ((readbytes = load_fw_direct(IVTV_DECODE_INIT_MPEG_FILENAME, |
| mem_offset, itv, IVTV_DECODE_INIT_MPEG_SIZE)) <= 0) { |
| IVTV_DEBUG_WARN("failed to read mpeg decoder initialisation file %s\n", |
| IVTV_DECODE_INIT_MPEG_FILENAME); |
| } else { |
| ivtv_vapi(itv, CX2341X_DEC_SCHED_DMA_FROM_HOST, 3, 0, readbytes, 0); |
| ivtv_msleep_timeout(100, 0); |
| } |
| ivtv_vapi(itv, CX2341X_DEC_STOP_PLAYBACK, 4, 0, 0, 0, 1); |
| } |
| |
| /* Try to restart the card & restore previous settings */ |
| static int ivtv_firmware_restart(struct ivtv *itv) |
| { |
| int rc = 0; |
| v4l2_std_id std; |
| |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) |
| /* Display test image during restart */ |
| ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, |
| SAA7127_INPUT_TYPE_TEST_IMAGE, |
| itv->card->video_outputs[itv->active_output].video_output, |
| 0); |
| |
| mutex_lock(&itv->udma.lock); |
| |
| rc = ivtv_firmware_init(itv); |
| if (rc) { |
| mutex_unlock(&itv->udma.lock); |
| return rc; |
| } |
| |
| /* Allow settings to reload */ |
| ivtv_mailbox_cache_invalidate(itv); |
| |
| /* Restore encoder video standard */ |
| std = itv->std; |
| itv->std = 0; |
| ivtv_s_std_enc(itv, std); |
| |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { |
| ivtv_init_mpeg_decoder(itv); |
| |
| /* Restore decoder video standard */ |
| std = itv->std_out; |
| itv->std_out = 0; |
| ivtv_s_std_dec(itv, std); |
| |
| /* Restore framebuffer if active */ |
| if (itv->ivtvfb_restore) |
| itv->ivtvfb_restore(itv); |
| |
| /* Restore alpha settings */ |
| ivtv_set_osd_alpha(itv); |
| |
| /* Restore normal output */ |
| ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_routing, |
| SAA7127_INPUT_TYPE_NORMAL, |
| itv->card->video_outputs[itv->active_output].video_output, |
| 0); |
| } |
| |
| mutex_unlock(&itv->udma.lock); |
| return rc; |
| } |
| |
| /* Check firmware running state. The checks fall through |
| allowing multiple failures to be logged. */ |
| int ivtv_firmware_check(struct ivtv *itv, char *where) |
| { |
| int res = 0; |
| |
| /* Check encoder is still running */ |
| if (ivtv_vapi(itv, CX2341X_ENC_PING_FW, 0) < 0) { |
| IVTV_WARN("Encoder has died : %s\n", where); |
| res = -1; |
| } |
| |
| /* Also check audio. Only check if not in use & encoder is okay */ |
| if (!res && !atomic_read(&itv->capturing) && |
| (!atomic_read(&itv->decoding) || |
| (atomic_read(&itv->decoding) < 2 && test_bit(IVTV_F_I_DEC_YUV, |
| &itv->i_flags)))) { |
| |
| if (ivtv_vapi(itv, CX2341X_ENC_MISC, 1, 12) < 0) { |
| IVTV_WARN("Audio has died (Encoder OK) : %s\n", where); |
| res = -2; |
| } |
| } |
| |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { |
| /* Second audio check. Skip if audio already failed */ |
| if (res != -2 && read_dec(0x100) != read_dec(0x104)) { |
| /* Wait & try again to be certain. */ |
| ivtv_msleep_timeout(14, 0); |
| if (read_dec(0x100) != read_dec(0x104)) { |
| IVTV_WARN("Audio has died (Decoder) : %s\n", |
| where); |
| res = -1; |
| } |
| } |
| |
| /* Check decoder is still running */ |
| if (ivtv_vapi(itv, CX2341X_DEC_PING_FW, 0) < 0) { |
| IVTV_WARN("Decoder has died : %s\n", where); |
| res = -1; |
| } |
| } |
| |
| /* If something failed & currently idle, try to reload */ |
| if (res && !atomic_read(&itv->capturing) && |
| !atomic_read(&itv->decoding)) { |
| IVTV_INFO("Detected in %s that firmware had failed - " |
| "Reloading\n", where); |
| res = ivtv_firmware_restart(itv); |
| /* |
| * Even if restarted ok, still signal a problem had occurred. |
| * The caller can come through this function again to check |
| * if things are really ok after the restart. |
| */ |
| if (!res) { |
| IVTV_INFO("Firmware restart okay\n"); |
| res = -EAGAIN; |
| } else { |
| IVTV_INFO("Firmware restart failed\n"); |
| } |
| } else if (res) { |
| res = -EIO; |
| } |
| |
| return res; |
| } |
| |
| MODULE_FIRMWARE(CX2341X_FIRM_ENC_FILENAME); |
| MODULE_FIRMWARE(CX2341X_FIRM_DEC_FILENAME); |
| MODULE_FIRMWARE(IVTV_DECODE_INIT_MPEG_FILENAME); |