| /* |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| |
| #include "cx88.h" |
| |
| static unsigned int vbibufs = 4; |
| module_param(vbibufs,int,0644); |
| MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32"); |
| |
| static unsigned int vbi_debug = 0; |
| module_param(vbi_debug,int,0644); |
| MODULE_PARM_DESC(vbi_debug,"enable debug messages [vbi]"); |
| |
| #define dprintk(level,fmt, arg...) if (vbi_debug >= level) \ |
| printk(KERN_DEBUG "%s: " fmt, dev->core->name , ## arg) |
| |
| /* ------------------------------------------------------------------ */ |
| |
| int cx8800_vbi_fmt (struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx8800_fh *fh = priv; |
| struct cx8800_dev *dev = fh->dev; |
| |
| f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; |
| f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; |
| f->fmt.vbi.offset = 244; |
| f->fmt.vbi.count[0] = VBI_LINE_COUNT; |
| f->fmt.vbi.count[1] = VBI_LINE_COUNT; |
| |
| if (dev->core->tvnorm & V4L2_STD_525_60) { |
| /* ntsc */ |
| f->fmt.vbi.sampling_rate = 28636363; |
| f->fmt.vbi.start[0] = 10; |
| f->fmt.vbi.start[1] = 273; |
| |
| } else if (dev->core->tvnorm & V4L2_STD_625_50) { |
| /* pal */ |
| f->fmt.vbi.sampling_rate = 35468950; |
| f->fmt.vbi.start[0] = 7 -1; |
| f->fmt.vbi.start[1] = 319 -1; |
| } |
| return 0; |
| } |
| |
| static int cx8800_start_vbi_dma(struct cx8800_dev *dev, |
| struct cx88_dmaqueue *q, |
| struct cx88_buffer *buf) |
| { |
| struct cx88_core *core = dev->core; |
| |
| /* setup fifo + format */ |
| cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24], |
| buf->vb.width, buf->risc.dma); |
| |
| cx_write(MO_VBOS_CONTROL, ( (1 << 18) | // comb filter delay fixup |
| (1 << 15) | // enable vbi capture |
| (1 << 11) )); |
| |
| /* reset counter */ |
| cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET); |
| q->count = 1; |
| |
| /* enable irqs */ |
| cx_set(MO_PCI_INTMSK, core->pci_irqmask | 0x01); |
| cx_set(MO_VID_INTMSK, 0x0f0088); |
| |
| /* enable capture */ |
| cx_set(VID_CAPTURE_CONTROL,0x18); |
| |
| /* start dma */ |
| cx_set(MO_DEV_CNTRL2, (1<<5)); |
| cx_set(MO_VID_DMACNTRL, 0x88); |
| |
| return 0; |
| } |
| |
| int cx8800_stop_vbi_dma(struct cx8800_dev *dev) |
| { |
| struct cx88_core *core = dev->core; |
| |
| /* stop dma */ |
| cx_clear(MO_VID_DMACNTRL, 0x88); |
| |
| /* disable capture */ |
| cx_clear(VID_CAPTURE_CONTROL,0x18); |
| |
| /* disable irqs */ |
| cx_clear(MO_PCI_INTMSK, 0x000001); |
| cx_clear(MO_VID_INTMSK, 0x0f0088); |
| return 0; |
| } |
| |
| int cx8800_restart_vbi_queue(struct cx8800_dev *dev, |
| struct cx88_dmaqueue *q) |
| { |
| struct cx88_buffer *buf; |
| struct list_head *item; |
| |
| if (list_empty(&q->active)) |
| return 0; |
| |
| buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); |
| dprintk(2,"restart_queue [%p/%d]: restart dma\n", |
| buf, buf->vb.i); |
| cx8800_start_vbi_dma(dev, q, buf); |
| list_for_each(item,&q->active) { |
| buf = list_entry(item, struct cx88_buffer, vb.queue); |
| buf->count = q->count++; |
| } |
| mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); |
| return 0; |
| } |
| |
| void cx8800_vbi_timeout(unsigned long data) |
| { |
| struct cx8800_dev *dev = (struct cx8800_dev*)data; |
| struct cx88_core *core = dev->core; |
| struct cx88_dmaqueue *q = &dev->vbiq; |
| struct cx88_buffer *buf; |
| unsigned long flags; |
| |
| cx88_sram_channel_dump(dev->core, &cx88_sram_channels[SRAM_CH24]); |
| |
| cx_clear(MO_VID_DMACNTRL, 0x88); |
| cx_clear(VID_CAPTURE_CONTROL, 0x18); |
| |
| spin_lock_irqsave(&dev->slock,flags); |
| while (!list_empty(&q->active)) { |
| buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); |
| list_del(&buf->vb.queue); |
| buf->vb.state = STATE_ERROR; |
| wake_up(&buf->vb.done); |
| printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->core->name, |
| buf, buf->vb.i, (unsigned long)buf->risc.dma); |
| } |
| cx8800_restart_vbi_queue(dev,q); |
| spin_unlock_irqrestore(&dev->slock,flags); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int |
| vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) |
| { |
| *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; |
| if (0 == *count) |
| *count = vbibufs; |
| if (*count < 2) |
| *count = 2; |
| if (*count > 32) |
| *count = 32; |
| return 0; |
| } |
| |
| static int |
| vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, |
| enum v4l2_field field) |
| { |
| struct cx8800_fh *fh = q->priv_data; |
| struct cx8800_dev *dev = fh->dev; |
| struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); |
| unsigned int size; |
| int rc; |
| |
| size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; |
| if (0 != buf->vb.baddr && buf->vb.bsize < size) |
| return -EINVAL; |
| |
| if (STATE_NEEDS_INIT == buf->vb.state) { |
| buf->vb.width = VBI_LINE_LENGTH; |
| buf->vb.height = VBI_LINE_COUNT; |
| buf->vb.size = size; |
| buf->vb.field = V4L2_FIELD_SEQ_TB; |
| |
| if (0 != (rc = videobuf_iolock(q,&buf->vb,NULL))) |
| goto fail; |
| cx88_risc_buffer(dev->pci, &buf->risc, |
| buf->vb.dma.sglist, |
| 0, buf->vb.width * buf->vb.height, |
| buf->vb.width, 0, |
| buf->vb.height); |
| } |
| buf->vb.state = STATE_PREPARED; |
| return 0; |
| |
| fail: |
| cx88_free_buffer(q,buf); |
| return rc; |
| } |
| |
| static void |
| vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) |
| { |
| struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); |
| struct cx88_buffer *prev; |
| struct cx8800_fh *fh = vq->priv_data; |
| struct cx8800_dev *dev = fh->dev; |
| struct cx88_dmaqueue *q = &dev->vbiq; |
| |
| /* add jump to stopper */ |
| buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); |
| buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); |
| |
| if (list_empty(&q->active)) { |
| list_add_tail(&buf->vb.queue,&q->active); |
| cx8800_start_vbi_dma(dev, q, buf); |
| buf->vb.state = STATE_ACTIVE; |
| buf->count = q->count++; |
| mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); |
| dprintk(2,"[%p/%d] vbi_queue - first active\n", |
| buf, buf->vb.i); |
| |
| } else { |
| prev = list_entry(q->active.prev, struct cx88_buffer, vb.queue); |
| list_add_tail(&buf->vb.queue,&q->active); |
| buf->vb.state = STATE_ACTIVE; |
| buf->count = q->count++; |
| prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); |
| dprintk(2,"[%p/%d] buffer_queue - append to active\n", |
| buf, buf->vb.i); |
| } |
| } |
| |
| static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) |
| { |
| struct cx88_buffer *buf = container_of(vb,struct cx88_buffer,vb); |
| |
| cx88_free_buffer(q,buf); |
| } |
| |
| struct videobuf_queue_ops cx8800_vbi_qops = { |
| .buf_setup = vbi_setup, |
| .buf_prepare = vbi_prepare, |
| .buf_queue = vbi_queue, |
| .buf_release = vbi_release, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |