| /* |
| * BRIEF MODULE DESCRIPTION |
| * Alchemy/AMD Au1x00 pci support. |
| * |
| * Copyright 2001,2002,2003 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ppopov@mvista.com or source@mvista.com |
| * |
| * Support for all devices (greater than 16) added by David Gathright. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| |
| #include <asm/mach-au1x00/au1000.h> |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(x...) printk(x) |
| #else |
| #define DBG(x...) |
| #endif |
| |
| #define PCI_ACCESS_READ 0 |
| #define PCI_ACCESS_WRITE 1 |
| |
| |
| int (*board_pci_idsel)(unsigned int devsel, int assert); |
| |
| void mod_wired_entry(int entry, unsigned long entrylo0, |
| unsigned long entrylo1, unsigned long entryhi, |
| unsigned long pagemask) |
| { |
| unsigned long old_pagemask; |
| unsigned long old_ctx; |
| |
| /* Save old context and create impossible VPN2 value */ |
| old_ctx = read_c0_entryhi() & 0xff; |
| old_pagemask = read_c0_pagemask(); |
| write_c0_index(entry); |
| write_c0_pagemask(pagemask); |
| write_c0_entryhi(entryhi); |
| write_c0_entrylo0(entrylo0); |
| write_c0_entrylo1(entrylo1); |
| tlb_write_indexed(); |
| write_c0_entryhi(old_ctx); |
| write_c0_pagemask(old_pagemask); |
| } |
| |
| struct vm_struct *pci_cfg_vm; |
| static int pci_cfg_wired_entry; |
| static int first_cfg = 1; |
| unsigned long last_entryLo0, last_entryLo1; |
| |
| static int config_access(unsigned char access_type, struct pci_bus *bus, |
| unsigned int dev_fn, unsigned char where, |
| u32 * data) |
| { |
| #if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 ) |
| unsigned int device = PCI_SLOT(dev_fn); |
| unsigned int function = PCI_FUNC(dev_fn); |
| unsigned long offset, status; |
| unsigned long cfg_base; |
| unsigned long flags; |
| int error = PCIBIOS_SUCCESSFUL; |
| unsigned long entryLo0, entryLo1; |
| |
| if (device > 19) { |
| *data = 0xffffffff; |
| return -1; |
| } |
| |
| local_irq_save(flags); |
| au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)), |
| Au1500_PCI_STATCMD); |
| au_sync_udelay(1); |
| |
| /* |
| * We can't ioremap the entire pci config space because it's |
| * too large. Nor can we call ioremap dynamically because some |
| * device drivers use the pci config routines from within |
| * interrupt handlers and that becomes a problem in get_vm_area(). |
| * We use one wired tlb to handle all config accesses for all |
| * busses. To improve performance, if the current device |
| * is the same as the last device accessed, we don't touch the |
| * tlb. |
| */ |
| if (first_cfg) { |
| /* reserve a wired entry for pci config accesses */ |
| first_cfg = 0; |
| pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP); |
| if (!pci_cfg_vm) |
| panic(KERN_ERR "PCI unable to get vm area\n"); |
| pci_cfg_wired_entry = read_c0_wired(); |
| add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K); |
| last_entryLo0 = last_entryLo1 = 0xffffffff; |
| } |
| |
| /* Allow board vendors to implement their own off-chip idsel. |
| * If it doesn't succeed, may as well bail out at this point. |
| */ |
| if (board_pci_idsel) { |
| if (board_pci_idsel(device, 1) == 0) { |
| *data = 0xffffffff; |
| local_irq_restore(flags); |
| return -1; |
| } |
| } |
| |
| /* setup the config window */ |
| if (bus->number == 0) { |
| cfg_base = ((1<<device)<<11); |
| } else { |
| cfg_base = 0x80000000 | (bus->number<<16) | (device<<11); |
| } |
| |
| /* setup the lower bits of the 36 bit address */ |
| offset = (function << 8) | (where & ~0x3); |
| /* pick up any address that falls below the page mask */ |
| offset |= cfg_base & ~PAGE_MASK; |
| |
| /* page boundary */ |
| cfg_base = cfg_base & PAGE_MASK; |
| |
| entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7; |
| entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7; |
| |
| if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) { |
| mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1, |
| (unsigned long)pci_cfg_vm->addr, PM_4K); |
| last_entryLo0 = entryLo0; |
| last_entryLo1 = entryLo1; |
| } |
| |
| if (access_type == PCI_ACCESS_WRITE) { |
| au_writel(*data, (int)(pci_cfg_vm->addr + offset)); |
| } else { |
| *data = au_readl((int)(pci_cfg_vm->addr + offset)); |
| } |
| au_sync_udelay(2); |
| |
| DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n", |
| access_type, bus->number, device, where, *data, offset); |
| |
| /* check master abort */ |
| status = au_readl(Au1500_PCI_STATCMD); |
| |
| if (status & (1<<29)) { |
| *data = 0xffffffff; |
| error = -1; |
| DBG("Au1x Master Abort\n"); |
| } else if ((status >> 28) & 0xf) { |
| DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf)); |
| |
| /* clear errors */ |
| au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD); |
| |
| *data = 0xffffffff; |
| error = -1; |
| } |
| |
| /* Take away the idsel. |
| */ |
| if (board_pci_idsel) { |
| (void)board_pci_idsel(device, 0); |
| } |
| |
| local_irq_restore(flags); |
| return error; |
| #endif |
| } |
| |
| static int read_config_byte(struct pci_bus *bus, unsigned int devfn, |
| int where, u8 * val) |
| { |
| u32 data; |
| int ret; |
| |
| ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| if (where & 1) |
| data >>= 8; |
| if (where & 2) |
| data >>= 16; |
| *val = data & 0xff; |
| return ret; |
| } |
| |
| |
| static int read_config_word(struct pci_bus *bus, unsigned int devfn, |
| int where, u16 * val) |
| { |
| u32 data; |
| int ret; |
| |
| ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); |
| if (where & 2) |
| data >>= 16; |
| *val = data & 0xffff; |
| return ret; |
| } |
| |
| static int read_config_dword(struct pci_bus *bus, unsigned int devfn, |
| int where, u32 * val) |
| { |
| int ret; |
| |
| ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); |
| return ret; |
| } |
| |
| static int |
| write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, |
| u8 val) |
| { |
| u32 data = 0; |
| |
| if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| return -1; |
| |
| data = (data & ~(0xff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| write_config_word(struct pci_bus *bus, unsigned int devfn, int where, |
| u16 val) |
| { |
| u32 data = 0; |
| |
| if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) |
| return -1; |
| |
| data = (data & ~(0xffff << ((where & 3) << 3))) | |
| (val << ((where & 3) << 3)); |
| |
| if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) |
| return -1; |
| |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int |
| write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, |
| u32 val) |
| { |
| if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) |
| return -1; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int config_read(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 * val) |
| { |
| switch (size) { |
| case 1: { |
| u8 _val; |
| int rc = read_config_byte(bus, devfn, where, &_val); |
| *val = _val; |
| return rc; |
| } |
| case 2: { |
| u16 _val; |
| int rc = read_config_word(bus, devfn, where, &_val); |
| *val = _val; |
| return rc; |
| } |
| default: |
| return read_config_dword(bus, devfn, where, val); |
| } |
| } |
| |
| static int config_write(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| switch (size) { |
| case 1: |
| return write_config_byte(bus, devfn, where, (u8) val); |
| case 2: |
| return write_config_word(bus, devfn, where, (u16) val); |
| default: |
| return write_config_dword(bus, devfn, where, val); |
| } |
| } |
| |
| |
| struct pci_ops au1x_pci_ops = { |
| config_read, |
| config_write |
| }; |