| /* |
| * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. |
| * All rights reserved |
| * www.brocade.com |
| * |
| * Linux driver for Brocade Fibre Channel Host Bus Adapter. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License (GPL) Version 2 as |
| * published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| #ifndef __BFA_DEFS_STATUS_H__ |
| #define __BFA_DEFS_STATUS_H__ |
| |
| /** |
| * API status return values |
| * |
| * NOTE: The error msgs are auto generated from the comments. Only singe line |
| * comments are supported |
| */ |
| enum bfa_status { |
| BFA_STATUS_OK = 0, /* Success */ |
| BFA_STATUS_FAILED = 1, /* Operation failed */ |
| BFA_STATUS_EINVAL = 2, /* Invalid params Check input |
| * parameters */ |
| BFA_STATUS_ENOMEM = 3, /* Out of resources */ |
| BFA_STATUS_ENOSYS = 4, /* Function not implemented */ |
| BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if |
| * persists, contact support */ |
| BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ |
| BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */ |
| BFA_STATUS_NOFLASH = 8, /* Flash not present */ |
| BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */ |
| BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ |
| BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ |
| BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted |
| * contact support */ |
| BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ |
| BFA_STATUS_ABORTED = 14, /* Operation aborted */ |
| BFA_STATUS_NODEV = 15, /* Dev is not present */ |
| BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */ |
| BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */ |
| BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ |
| BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ |
| BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass |
| * through Req */ |
| BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */ |
| BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported |
| * limit */ |
| BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed |
| * setting */ |
| BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ |
| BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */ |
| BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */ |
| BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */ |
| BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace |
| * SFP/cable */ |
| BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ |
| BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */ |
| BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */ |
| BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */ |
| BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */ |
| BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */ |
| BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */ |
| BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */ |
| BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */ |
| BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */ |
| BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */ |
| BFA_STATUS_EBADF = 40, /* Bad file descriptor */ |
| BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */ |
| BFA_STATUS_EIO = 42, /* I/O error */ |
| BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control |
| * operation */ |
| BFA_STATUS_ENXIO = 44, /* No such device or address */ |
| BFA_STATUS_EFOPEN = 45, /* Failed to open file */ |
| BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ |
| BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port |
| * first */ |
| BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */ |
| BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace |
| * SFP/cable */ |
| BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace |
| * SFP/cable */ |
| BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace |
| * SFP/cable */ |
| BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the |
| * rport */ |
| BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */ |
| BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */ |
| BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */ |
| BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists |
| * contact support */ |
| BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ |
| BFA_STATUS_MISMATCH = 58, /* Version mismatch */ |
| BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */ |
| BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable |
| * adapter first */ |
| BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC |
| * and if it still fails, |
| * contact support */ |
| BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped |
| * in OS */ |
| BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different |
| * name */ |
| BFA_STATUS_PENDING = 64, /* API completes asynchronously */ |
| BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for |
| * 8G HBA */ |
| BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for |
| * 4G HBA */ |
| BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */ |
| BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */ |
| BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */ |
| BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version |
| * mismatch */ |
| BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ |
| BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ |
| BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */ |
| BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already |
| * on */ |
| BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already |
| * off */ |
| BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */ |
| BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */ |
| BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ |
| BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code |
| * file */ |
| BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already |
| * enabled */ |
| BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already |
| * disabled */ |
| BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ |
| BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */ |
| BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */ |
| BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already |
| * enabled */ |
| BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already |
| * disabled */ |
| BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is |
| * enabled */ |
| BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */ |
| BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ |
| BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact |
| * support */ |
| BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */ |
| BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */ |
| BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */ |
| BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration |
| * key/value pair */ |
| BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */ |
| BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */ |
| BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */ |
| BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */ |
| BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in |
| * driver */ |
| BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */ |
| BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */ |
| BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new |
| * VLAN ID failed */ |
| BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */ |
| BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */ |
| BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be |
| * found */ |
| BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode |
| * only */ |
| BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode |
| * only */ |
| BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */ |
| BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ |
| BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please |
| * bring down first */ |
| BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */ |
| BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */ |
| BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already |
| * exists */ |
| BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part |
| * of another team */ |
| BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured. |
| * Delete all VLANs before |
| * creating team */ |
| BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured |
| * for adapters */ |
| BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds |
| * configured for adapters */ |
| BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for |
| * adapters */ |
| BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters |
| * configured for adapters */ |
| BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters |
| * configured for adapters */ |
| BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload |
| * parameters configured for |
| * adapters */ |
| BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */ |
| BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */ |
| BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be |
| * removed. Change primary before |
| * removing */ |
| BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports |
| * per team */ |
| BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being |
| * deleted */ |
| BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */ |
| BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs |
| * per port */ |
| BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not |
| * allowed for CNA */ |
| BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not |
| * loaded */ |
| BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */ |
| BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */ |
| BFA_STATUS_NO_DRIVER = 133, /* Storage/Ethernet driver not loaded */ |
| BFA_STATUS_INVALID_MAC = 134, /* Invalid mac address */ |
| BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */ |
| BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */ |
| BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port vlan (PVID) */ |
| BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port vlan (PVID) */ |
| BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */ |
| BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to |
| * Non-Zero Value */ |
| BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network |
| * Subsystem Lock Failed.Please |
| * try after some time */ |
| BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem |
| * handle Failed. Please try |
| * after some time */ |
| BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not |
| * Enabled on this port */ |
| BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient |
| * permissions to execute the BCU |
| * application */ |
| BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved Vlan name |
| * string. The name is not allowed |
| * for the normal Vlans */ |
| BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */ |
| BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthru vlan id */ |
| BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation |
| * failed */ |
| BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation |
| * failed */ |
| BFA_STATUS_MAX_VAL /* Unknown error code */ |
| }; |
| #define bfa_status_t enum bfa_status |
| |
| enum bfa_eproto_status { |
| BFA_EPROTO_BAD_ACCEPT = 0, |
| BFA_EPROTO_UNKNOWN_RSP = 1 |
| }; |
| #define bfa_eproto_status_t enum bfa_eproto_status |
| |
| #endif /* __BFA_DEFS_STATUS_H__ */ |
