| /* |
| * KFR2R09 LCD panel support |
| * |
| * Copyright (C) 2009 Magnus Damm |
| * |
| * Register settings based on the out-of-tree t33fb.c driver |
| * Copyright (C) 2008 Lineo Solutions, Inc. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gpio.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <mach/kfr2r09.h> |
| #include <cpu/sh7724.h> |
| |
| /* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made |
| * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is |
| * communicating with the main port of the LCDC using an 18-bit SYS interface. |
| * |
| * The device code for this LCD module is 0x01221517. |
| */ |
| |
| static const unsigned char data_frame_if[] = { |
| 0x02, /* WEMODE: 1=cont, 0=one-shot */ |
| 0x00, 0x00, |
| 0x00, /* EPF, DFM */ |
| 0x02, /* RIM[1] : 1 (18bpp) */ |
| }; |
| |
| static const unsigned char data_panel[] = { |
| 0x0b, |
| 0x63, /* 400 lines */ |
| 0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00, |
| }; |
| |
| static const unsigned char data_timing[] = { |
| 0x00, 0x00, 0x13, 0x08, 0x08, |
| }; |
| |
| static const unsigned char data_timing_src[] = { |
| 0x11, 0x01, 0x00, 0x01, |
| }; |
| |
| static const unsigned char data_gamma[] = { |
| 0x01, 0x02, 0x08, 0x23, 0x03, 0x0c, 0x00, 0x06, 0x00, 0x00, |
| 0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00, |
| }; |
| |
| static const unsigned char data_power[] = { |
| 0x07, 0xc5, 0xdc, 0x02, 0x33, 0x0a, |
| }; |
| |
| static unsigned long read_reg(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| return so->read_data(sohandle); |
| } |
| |
| static void write_reg(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so, |
| int i, unsigned long v) |
| { |
| if (i) |
| so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */ |
| else |
| so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */ |
| } |
| |
| static void write_data(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so, |
| unsigned char const *data, int no_data) |
| { |
| int i; |
| |
| for (i = 0; i < no_data; i++) |
| write_reg(sohandle, so, 1, data[i]); |
| } |
| |
| static unsigned long read_device_code(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| unsigned long device_code; |
| |
| /* access protect OFF */ |
| write_reg(sohandle, so, 0, 0xb0); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* deep standby OFF */ |
| write_reg(sohandle, so, 0, 0xb1); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* device code command */ |
| write_reg(sohandle, so, 0, 0xbf); |
| mdelay(50); |
| |
| /* dummy read */ |
| read_reg(sohandle, so); |
| |
| /* read device code */ |
| device_code = ((read_reg(sohandle, so) & 0xff) << 24); |
| device_code |= ((read_reg(sohandle, so) & 0xff) << 16); |
| device_code |= ((read_reg(sohandle, so) & 0xff) << 8); |
| device_code |= (read_reg(sohandle, so) & 0xff); |
| |
| return device_code; |
| } |
| |
| static void write_memory_start(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| write_reg(sohandle, so, 0, 0x2c); |
| } |
| |
| static void clear_memory(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| int i; |
| |
| /* write start */ |
| write_memory_start(sohandle, so); |
| |
| /* paint it black */ |
| for (i = 0; i < (240 * 400); i++) |
| write_reg(sohandle, so, 1, 0x00); |
| } |
| |
| static void display_on(void *sohandle, |
| struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| /* access protect off */ |
| write_reg(sohandle, so, 0, 0xb0); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* exit deep standby mode */ |
| write_reg(sohandle, so, 0, 0xb1); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* frame memory I/F */ |
| write_reg(sohandle, so, 0, 0xb3); |
| write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if)); |
| |
| /* display mode and frame memory write mode */ |
| write_reg(sohandle, so, 0, 0xb4); |
| write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */ |
| |
| /* panel */ |
| write_reg(sohandle, so, 0, 0xc0); |
| write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel)); |
| |
| /* timing (normal) */ |
| write_reg(sohandle, so, 0, 0xc1); |
| write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); |
| |
| /* timing (partial) */ |
| write_reg(sohandle, so, 0, 0xc2); |
| write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); |
| |
| /* timing (idle) */ |
| write_reg(sohandle, so, 0, 0xc3); |
| write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing)); |
| |
| /* timing (source/VCOM/gate driving) */ |
| write_reg(sohandle, so, 0, 0xc4); |
| write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src)); |
| |
| /* gamma (red) */ |
| write_reg(sohandle, so, 0, 0xc8); |
| write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); |
| |
| /* gamma (green) */ |
| write_reg(sohandle, so, 0, 0xc9); |
| write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); |
| |
| /* gamma (blue) */ |
| write_reg(sohandle, so, 0, 0xca); |
| write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma)); |
| |
| /* power (common) */ |
| write_reg(sohandle, so, 0, 0xd0); |
| write_data(sohandle, so, data_power, ARRAY_SIZE(data_power)); |
| |
| /* VCOM */ |
| write_reg(sohandle, so, 0, 0xd1); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x0f); |
| write_reg(sohandle, so, 1, 0x02); |
| |
| /* power (normal) */ |
| write_reg(sohandle, so, 0, 0xd2); |
| write_reg(sohandle, so, 1, 0x63); |
| write_reg(sohandle, so, 1, 0x24); |
| |
| /* power (partial) */ |
| write_reg(sohandle, so, 0, 0xd3); |
| write_reg(sohandle, so, 1, 0x63); |
| write_reg(sohandle, so, 1, 0x24); |
| |
| /* power (idle) */ |
| write_reg(sohandle, so, 0, 0xd4); |
| write_reg(sohandle, so, 1, 0x63); |
| write_reg(sohandle, so, 1, 0x24); |
| |
| write_reg(sohandle, so, 0, 0xd8); |
| write_reg(sohandle, so, 1, 0x77); |
| write_reg(sohandle, so, 1, 0x77); |
| |
| /* TE signal */ |
| write_reg(sohandle, so, 0, 0x35); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* TE signal line */ |
| write_reg(sohandle, so, 0, 0x44); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x00); |
| |
| /* column address */ |
| write_reg(sohandle, so, 0, 0x2a); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0xef); |
| |
| /* page address */ |
| write_reg(sohandle, so, 0, 0x2b); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x00); |
| write_reg(sohandle, so, 1, 0x01); |
| write_reg(sohandle, so, 1, 0x8f); |
| |
| /* exit sleep mode */ |
| write_reg(sohandle, so, 0, 0x11); |
| |
| mdelay(120); |
| |
| /* clear vram */ |
| clear_memory(sohandle, so); |
| |
| /* display ON */ |
| write_reg(sohandle, so, 0, 0x29); |
| mdelay(1); |
| |
| write_memory_start(sohandle, so); |
| } |
| |
| int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| /* power on */ |
| gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */ |
| gpio_set_value(GPIO_PTE4, 0); /* LCD_RST/ -> L */ |
| gpio_set_value(GPIO_PTF4, 1); /* PROTECT/ -> H */ |
| udelay(1100); |
| gpio_set_value(GPIO_PTE4, 1); /* LCD_RST/ -> H */ |
| udelay(10); |
| gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */ |
| mdelay(20); |
| |
| if (read_device_code(sohandle, so) != 0x01221517) |
| return -ENODEV; |
| |
| pr_info("KFR2R09 WQVGA LCD Module detected.\n"); |
| |
| display_on(sohandle, so); |
| return 0; |
| } |
| |
| void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| write_memory_start(sohandle, so); |
| } |
| |
| #define CTRL_CKSW 0x10 |
| #define CTRL_C10 0x20 |
| #define CTRL_CPSW 0x80 |
| #define MAIN_MLED4 0x40 |
| #define MAIN_MSW 0x80 |
| |
| int kfr2r09_lcd_set_brightness(int brightness) |
| { |
| struct i2c_adapter *a; |
| struct i2c_msg msg; |
| unsigned char buf[2]; |
| int ret; |
| |
| a = i2c_get_adapter(0); |
| if (!a) |
| return -ENODEV; |
| |
| buf[0] = 0x00; |
| if (brightness) |
| buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW; |
| else |
| buf[1] = 0; |
| |
| msg.addr = 0x75; |
| msg.buf = buf; |
| msg.len = 2; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| buf[0] = 0x01; |
| if (brightness) |
| buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c; |
| else |
| buf[1] = 0; |
| |
| msg.addr = 0x75; |
| msg.buf = buf; |
| msg.len = 2; |
| msg.flags = 0; |
| ret = i2c_transfer(a, &msg, 1); |
| if (ret != 1) |
| return -ENODEV; |
| |
| return 0; |
| } |