| /* |
| * |
| * sep_driver_config.h - Security Processor Driver configuration |
| * |
| * Copyright(c) 2009 Intel Corporation. All rights reserved. |
| * Copyright(c) 2009 Discretix. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * CONTACTS: |
| * |
| * Mark Allyn mark.a.allyn@intel.com |
| * |
| * CHANGES: |
| * |
| * 2009.06.26 Initial publish |
| * |
| */ |
| |
| #ifndef __SEP_DRIVER_CONFIG_H__ |
| #define __SEP_DRIVER_CONFIG_H__ |
| |
| |
| /*-------------------------------------- |
| DRIVER CONFIGURATION FLAGS |
| -------------------------------------*/ |
| |
| /* if flag is on , then the driver is running in polling and |
| not interrupt mode */ |
| #define SEP_DRIVER_POLLING_MODE 1 |
| |
| /* flag which defines if the shared area address should be |
| reconfiged (send to SEP anew) during init of the driver */ |
| #define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0 |
| |
| /* the mode for running on the ARM1172 Evaluation platform (flag is 1) */ |
| #define SEP_DRIVER_ARM_DEBUG_MODE 0 |
| |
| /*------------------------------------------- |
| INTERNAL DATA CONFIGURATION |
| -------------------------------------------*/ |
| |
| /* flag for the input array */ |
| #define SEP_DRIVER_IN_FLAG 0 |
| |
| /* flag for output array */ |
| #define SEP_DRIVER_OUT_FLAG 1 |
| |
| /* maximum number of entries in one LLI tables */ |
| #define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 8 |
| |
| |
| /*-------------------------------------------------------- |
| SHARED AREA memory total size is 36K |
| it is divided is following: |
| |
| SHARED_MESSAGE_AREA 8K } |
| } |
| STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K) |
| } |
| DATA_POOL_AREA 12K } |
| |
| SYNCHRONIC_DMA_TABLES_AREA 5K |
| |
| FLOW_DMA_TABLES_AREA 4K |
| |
| SYSTEM_MEMORY_AREA 3k |
| |
| SYSTEM_MEMORY total size is 3k |
| it is divided as following: |
| |
| TIME_MEMORY_AREA 8B |
| -----------------------------------------------------------*/ |
| |
| |
| |
| /* |
| the maximum length of the message - the rest of the message shared |
| area will be dedicated to the dma lli tables |
| */ |
| #define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024) |
| |
| /* the size of the message shared area in pages */ |
| #define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024) |
| |
| /* the size of the data pool static area in pages */ |
| #define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024) |
| |
| /* the size of the data pool shared area size in pages */ |
| #define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (12 * 1024) |
| |
| /* the size of the message shared area in pages */ |
| #define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 5) |
| |
| |
| /* the size of the data pool shared area size in pages */ |
| #define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4) |
| |
| /* system data (time, caller id etc') pool */ |
| #define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES 100 |
| |
| |
| /* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and |
| DATA POOL areas. area must be module 4k */ |
| #define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 24) |
| |
| |
| /*----------------------------------------------- |
| offsets of the areas starting from the shared area start address |
| */ |
| |
| /* message area offset */ |
| #define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0 |
| |
| /* static pool area offset */ |
| #define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES) |
| |
| /* data pool area offset */ |
| #define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \ |
| SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES) |
| |
| /* synhronic dma tables area offset */ |
| #define SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \ |
| SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) |
| |
| /* sep driver flow dma tables area offset */ |
| #define SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES + \ |
| SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES) |
| |
| /* system memory offset in bytes */ |
| #define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES + \ |
| SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES) |
| |
| /* offset of the time area */ |
| #define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \ |
| (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES) |
| |
| |
| |
| /* start physical address of the SEP registers memory in HOST */ |
| #define SEP_IO_MEM_REGION_START_ADDRESS 0x80000000 |
| |
| /* size of the SEP registers memory region in HOST (for now 100 registers) */ |
| #define SEP_IO_MEM_REGION_SIZE (2 * 0x100000) |
| |
| /* define the number of IRQ for SEP interrupts */ |
| #define SEP_DIRVER_IRQ_NUM 1 |
| |
| /* maximum number of add buffers */ |
| #define SEP_MAX_NUM_ADD_BUFFERS 100 |
| |
| /* number of flows */ |
| #define SEP_DRIVER_NUM_FLOWS 4 |
| |
| /* maximum number of entries in flow table */ |
| #define SEP_DRIVER_MAX_FLOW_NUM_ENTRIES_IN_TABLE 25 |
| |
| /* offset of the num entries in the block length entry of the LLI */ |
| #define SEP_NUM_ENTRIES_OFFSET_IN_BITS 24 |
| |
| /* offset of the interrupt flag in the block length entry of the LLI */ |
| #define SEP_INT_FLAG_OFFSET_IN_BITS 31 |
| |
| /* mask for extracting data size from LLI */ |
| #define SEP_TABLE_DATA_SIZE_MASK 0xFFFFFF |
| |
| /* mask for entries after being shifted left */ |
| #define SEP_NUM_ENTRIES_MASK 0x7F |
| |
| /* default flow id */ |
| #define SEP_FREE_FLOW_ID 0xFFFFFFFF |
| |
| /* temp flow id used during cretiong of new flow until receiving |
| real flow id from sep */ |
| #define SEP_TEMP_FLOW_ID (SEP_DRIVER_NUM_FLOWS + 1) |
| |
| /* maximum add buffers message length in bytes */ |
| #define SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES (7 * 4) |
| |
| /* maximum number of concurrent virtual buffers */ |
| #define SEP_MAX_VIRT_BUFFERS_CONCURRENT 100 |
| |
| /* the token that defines the start of time address */ |
| #define SEP_TIME_VAL_TOKEN 0x12345678 |
| |
| /* DEBUG LEVEL MASKS */ |
| #define SEP_DEBUG_LEVEL_BASIC 0x1 |
| |
| #define SEP_DEBUG_LEVEL_EXTENDED 0x4 |
| |
| |
| /* Debug helpers */ |
| |
| #define dbg(fmt, args...) \ |
| do {\ |
| if (debug & SEP_DEBUG_LEVEL_BASIC) \ |
| printk(KERN_DEBUG fmt, ##args); \ |
| } while(0); |
| |
| #define edbg(fmt, args...) \ |
| do { \ |
| if (debug & SEP_DEBUG_LEVEL_EXTENDED) \ |
| printk(KERN_DEBUG fmt, ##args); \ |
| } while(0); |
| |
| |
| |
| #endif |