blob: 3184063f8042916524ab32d7ded779a937cc4b0f [file] [log] [blame]
/*
*
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1200/Db1200 board setup.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1200";
}
void board_reset(void)
{
bcsr_write(BCSR_RESETS, 0);
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
bcsr_init(PB1200_BCSR_PHYS_ADDR,
PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
#if 0
{
u32 pin_func;
/*
* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
u32 freq0, clksrc;
u32 pin_func;
/* Select SMBus in CPLD */
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
/* Set GPIOs correctly */
pin_func |= 2 << 17;
au_writel(pin_func, SYS_PINFUNC);
au_sync();
/* The I2C driver depends on 50 MHz clock */
freq0 = au_readl(SYS_FREQCTRL0);
au_sync();
freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
freq0 |= 3 << SYS_FC_FRDIV1_BIT;
/* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
freq0 |= SYS_FC_FE1;
au_writel(freq0, SYS_FREQCTRL0);
au_sync();
clksrc = au_readl(SYS_CLKSRC);
au_sync();
clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
/* Bit 22 is EXTCLK0 for PSC0 */
clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
au_writel(clksrc, SYS_CLKSRC);
au_sync();
}
#endif
/*
* The Pb1200 development board uses external MUX for PSC0 to
* support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
*/
#ifdef CONFIG_I2C_AU1550
bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
#endif
au_sync();
}
static int __init pb1200_init_irq(void)
{
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
return 0;
}
arch_initcall(pb1200_init_irq);
int board_au1200fb_panel(void)
{
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
}
int board_au1200fb_panel_init(void)
{
/* Apply power */
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL);
/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
BCSR_BOARD_LCDBL, 0);
/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}