| /* |
| * |
| * Copyright (C) 2002 Intersil Americas Inc. |
| * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_arp.h> |
| |
| #include "prismcompat.h" |
| #include "isl_38xx.h" |
| #include "islpci_eth.h" |
| #include "islpci_mgt.h" |
| #include "oid_mgt.h" |
| |
| /****************************************************************************** |
| Network Interface functions |
| ******************************************************************************/ |
| void |
| islpci_eth_cleanup_transmit(islpci_private *priv, |
| isl38xx_control_block *control_block) |
| { |
| struct sk_buff *skb; |
| u32 index; |
| |
| /* compare the control block read pointer with the free pointer */ |
| while (priv->free_data_tx != |
| le32_to_cpu(control_block-> |
| device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) { |
| /* read the index of the first fragment to be freed */ |
| index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE; |
| |
| /* check for holes in the arrays caused by multi fragment frames |
| * searching for the last fragment of a frame */ |
| if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) { |
| /* entry is the last fragment of a frame |
| * free the skb structure and unmap pci memory */ |
| skb = priv->data_low_tx[index]; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, |
| "cleanup skb %p skb->data %p skb->len %u truesize %u\n ", |
| skb, skb->data, skb->len, skb->truesize); |
| #endif |
| |
| pci_unmap_single(priv->pdev, |
| priv->pci_map_tx_address[index], |
| skb->len, PCI_DMA_TODEVICE); |
| dev_kfree_skb_irq(skb); |
| skb = NULL; |
| } |
| /* increment the free data low queue pointer */ |
| priv->free_data_tx++; |
| } |
| } |
| |
| int |
| islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev) |
| { |
| islpci_private *priv = netdev_priv(ndev); |
| isl38xx_control_block *cb = priv->control_block; |
| u32 index; |
| dma_addr_t pci_map_address; |
| int frame_size; |
| isl38xx_fragment *fragment; |
| int offset; |
| struct sk_buff *newskb; |
| int newskb_offset; |
| unsigned long flags; |
| unsigned char wds_mac[6]; |
| u32 curr_frag; |
| int err = 0; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n"); |
| #endif |
| |
| /* lock the driver code */ |
| spin_lock_irqsave(&priv->slock, flags); |
| |
| /* check whether the destination queue has enough fragments for the frame */ |
| curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]); |
| if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) { |
| printk(KERN_ERR "%s: transmit device queue full when awake\n", |
| ndev->name); |
| netif_stop_queue(ndev); |
| |
| /* trigger the device */ |
| isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE, |
| ISL38XX_DEV_INT_REG); |
| udelay(ISL38XX_WRITEIO_DELAY); |
| |
| err = -EBUSY; |
| goto drop_free; |
| } |
| /* Check alignment and WDS frame formatting. The start of the packet should |
| * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes |
| * and add WDS address information */ |
| if (likely(((long) skb->data & 0x03) | init_wds)) { |
| /* get the number of bytes to add and re-allign */ |
| offset = (4 - (long) skb->data) & 0x03; |
| offset += init_wds ? 6 : 0; |
| |
| /* check whether the current skb can be used */ |
| if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) { |
| unsigned char *src = skb->data; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset, |
| init_wds); |
| #endif |
| |
| /* align the buffer on 4-byte boundary */ |
| skb_reserve(skb, (4 - (long) skb->data) & 0x03); |
| if (init_wds) { |
| /* wds requires an additional address field of 6 bytes */ |
| skb_put(skb, 6); |
| #ifdef ISLPCI_ETH_DEBUG |
| printk("islpci_eth_transmit:wds_mac\n"); |
| #endif |
| memmove(skb->data + 6, src, skb->len); |
| memcpy(skb->data, wds_mac, 6); |
| } else { |
| memmove(skb->data, src, skb->len); |
| } |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data, |
| src, skb->len); |
| #endif |
| } else { |
| newskb = |
| dev_alloc_skb(init_wds ? skb->len + 6 : skb->len); |
| if (unlikely(newskb == NULL)) { |
| printk(KERN_ERR "%s: Cannot allocate skb\n", |
| ndev->name); |
| err = -ENOMEM; |
| goto drop_free; |
| } |
| newskb_offset = (4 - (long) newskb->data) & 0x03; |
| |
| /* Check if newskb->data is aligned */ |
| if (newskb_offset) |
| skb_reserve(newskb, newskb_offset); |
| |
| skb_put(newskb, init_wds ? skb->len + 6 : skb->len); |
| if (init_wds) { |
| memcpy(newskb->data + 6, skb->data, skb->len); |
| memcpy(newskb->data, wds_mac, 6); |
| #ifdef ISLPCI_ETH_DEBUG |
| printk("islpci_eth_transmit:wds_mac\n"); |
| #endif |
| } else |
| memcpy(newskb->data, skb->data, skb->len); |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n", |
| newskb->data, skb->data, skb->len, init_wds); |
| #endif |
| |
| newskb->dev = skb->dev; |
| dev_kfree_skb(skb); |
| skb = newskb; |
| } |
| } |
| /* display the buffer contents for debugging */ |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data); |
| display_buffer((char *) skb->data, skb->len); |
| #endif |
| |
| /* map the skb buffer to pci memory for DMA operation */ |
| pci_map_address = pci_map_single(priv->pdev, |
| (void *) skb->data, skb->len, |
| PCI_DMA_TODEVICE); |
| if (unlikely(pci_map_address == 0)) { |
| printk(KERN_WARNING "%s: cannot map buffer to PCI\n", |
| ndev->name); |
| |
| err = -EIO; |
| goto drop_free; |
| } |
| /* Place the fragment in the control block structure. */ |
| index = curr_frag % ISL38XX_CB_TX_QSIZE; |
| fragment = &cb->tx_data_low[index]; |
| |
| priv->pci_map_tx_address[index] = pci_map_address; |
| /* store the skb address for future freeing */ |
| priv->data_low_tx[index] = skb; |
| /* set the proper fragment start address and size information */ |
| frame_size = skb->len; |
| fragment->size = cpu_to_le16(frame_size); |
| fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */ |
| fragment->address = cpu_to_le32(pci_map_address); |
| curr_frag++; |
| |
| /* The fragment address in the control block must have been |
| * written before announcing the frame buffer to device. */ |
| wmb(); |
| cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag); |
| |
| if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD |
| > ISL38XX_CB_TX_QSIZE) { |
| /* stop sends from upper layers */ |
| netif_stop_queue(ndev); |
| |
| /* set the full flag for the transmission queue */ |
| priv->data_low_tx_full = 1; |
| } |
| |
| /* trigger the device */ |
| islpci_trigger(priv); |
| |
| /* unlock the driver code */ |
| spin_unlock_irqrestore(&priv->slock, flags); |
| |
| /* set the transmission time */ |
| ndev->trans_start = jiffies; |
| priv->statistics.tx_packets++; |
| priv->statistics.tx_bytes += skb->len; |
| |
| return 0; |
| |
| drop_free: |
| priv->statistics.tx_dropped++; |
| spin_unlock_irqrestore(&priv->slock, flags); |
| dev_kfree_skb(skb); |
| skb = NULL; |
| return err; |
| } |
| |
| static inline int |
| islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) |
| { |
| /* The card reports full 802.11 packets but with a 20 bytes |
| * header and without the FCS. But there a is a bit that |
| * indicates if the packet is corrupted :-) */ |
| struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data; |
| if (hdr->flags & 0x01) |
| /* This one is bad. Drop it ! */ |
| return -1; |
| if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) { |
| struct avs_80211_1_header *avs; |
| /* extract the relevant data from the header */ |
| u32 clock = le32_to_cpu(hdr->clock); |
| u8 rate = hdr->rate; |
| u16 freq = le16_to_cpu(hdr->freq); |
| u8 rssi = hdr->rssi; |
| |
| skb_pull(*skb, sizeof (struct rfmon_header)); |
| |
| if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) { |
| struct sk_buff *newskb = skb_copy_expand(*skb, |
| sizeof (struct |
| avs_80211_1_header), |
| 0, GFP_ATOMIC); |
| if (newskb) { |
| dev_kfree_skb_irq(*skb); |
| *skb = newskb; |
| } else |
| return -1; |
| /* This behavior is not very subtile... */ |
| } |
| |
| /* make room for the new header and fill it. */ |
| avs = |
| (struct avs_80211_1_header *) skb_push(*skb, |
| sizeof (struct |
| avs_80211_1_header)); |
| |
| avs->version = cpu_to_be32(P80211CAPTURE_VERSION); |
| avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); |
| avs->mactime = cpu_to_be64(le64_to_cpu(clock)); |
| avs->hosttime = cpu_to_be64(jiffies); |
| avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ |
| avs->channel = cpu_to_be32(channel_of_freq(freq)); |
| avs->datarate = cpu_to_be32(rate * 5); |
| avs->antenna = cpu_to_be32(0); /*unknown */ |
| avs->priority = cpu_to_be32(0); /*unknown */ |
| avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */ |
| avs->ssi_signal = cpu_to_be32(rssi & 0x7f); |
| avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */ |
| avs->preamble = cpu_to_be32(0); /*unknown */ |
| avs->encoding = cpu_to_be32(0); /*unknown */ |
| } else |
| skb_pull(*skb, sizeof (struct rfmon_header)); |
| |
| (*skb)->protocol = htons(ETH_P_802_2); |
| (*skb)->mac.raw = (*skb)->data; |
| (*skb)->pkt_type = PACKET_OTHERHOST; |
| |
| return 0; |
| } |
| |
| int |
| islpci_eth_receive(islpci_private *priv) |
| { |
| struct net_device *ndev = priv->ndev; |
| isl38xx_control_block *control_block = priv->control_block; |
| struct sk_buff *skb; |
| u16 size; |
| u32 index, offset; |
| unsigned char *src; |
| int discard = 0; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n"); |
| #endif |
| |
| /* the device has written an Ethernet frame in the data area |
| * of the sk_buff without updating the structure, do it now */ |
| index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE; |
| size = le16_to_cpu(control_block->rx_data_low[index].size); |
| skb = priv->data_low_rx[index]; |
| offset = ((unsigned long) |
| le32_to_cpu(control_block->rx_data_low[index].address) - |
| (unsigned long) skb->data) & 3; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, |
| "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ", |
| control_block->rx_data_low[priv->free_data_rx].address, skb->data, |
| skb->len, offset, skb->truesize); |
| #endif |
| |
| /* delete the streaming DMA mapping before processing the skb */ |
| pci_unmap_single(priv->pdev, |
| priv->pci_map_rx_address[index], |
| MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE); |
| |
| /* update the skb structure and allign the buffer */ |
| skb_put(skb, size); |
| if (offset) { |
| /* shift the buffer allocation offset bytes to get the right frame */ |
| skb_pull(skb, 2); |
| skb_put(skb, 2); |
| } |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| /* display the buffer contents for debugging */ |
| DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); |
| display_buffer((char *) skb->data, skb->len); |
| #endif |
| |
| /* check whether WDS is enabled and whether the data frame is a WDS frame */ |
| |
| if (init_wds) { |
| /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */ |
| src = skb->data + 6; |
| memmove(skb->data, src, skb->len - 6); |
| skb_trim(skb, skb->len - 6); |
| } |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb); |
| DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len); |
| |
| /* display the buffer contents for debugging */ |
| DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data); |
| display_buffer((char *) skb->data, skb->len); |
| #endif |
| |
| /* do some additional sk_buff and network layer parameters */ |
| skb->dev = ndev; |
| |
| /* take care of monitor mode and spy monitoring. */ |
| if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) |
| discard = islpci_monitor_rx(priv, &skb); |
| else { |
| if (unlikely(skb->data[2 * ETH_ALEN] == 0)) { |
| /* The packet has a rx_annex. Read it for spy monitoring, Then |
| * remove it, while keeping the 2 leading MAC addr. |
| */ |
| struct iw_quality wstats; |
| struct rx_annex_header *annex = |
| (struct rx_annex_header *) skb->data; |
| wstats.level = annex->rfmon.rssi; |
| /* The noise value can be a bit outdated if nobody's |
| * reading wireless stats... */ |
| wstats.noise = priv->local_iwstatistics.qual.noise; |
| wstats.qual = wstats.level - wstats.noise; |
| wstats.updated = 0x07; |
| /* Update spy records */ |
| wireless_spy_update(ndev, annex->addr2, &wstats); |
| |
| memcpy(skb->data + sizeof (struct rfmon_header), |
| skb->data, 2 * ETH_ALEN); |
| skb_pull(skb, sizeof (struct rfmon_header)); |
| } |
| skb->protocol = eth_type_trans(skb, ndev); |
| } |
| skb->ip_summed = CHECKSUM_NONE; |
| priv->statistics.rx_packets++; |
| priv->statistics.rx_bytes += size; |
| |
| /* deliver the skb to the network layer */ |
| #ifdef ISLPCI_ETH_DEBUG |
| printk |
| ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", |
| skb->data[0], skb->data[1], skb->data[2], skb->data[3], |
| skb->data[4], skb->data[5]); |
| #endif |
| if (unlikely(discard)) { |
| dev_kfree_skb_irq(skb); |
| skb = NULL; |
| } else |
| netif_rx(skb); |
| |
| /* increment the read index for the rx data low queue */ |
| priv->free_data_rx++; |
| |
| /* add one or more sk_buff structures */ |
| while (index = |
| le32_to_cpu(control_block-> |
| driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]), |
| index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) { |
| /* allocate an sk_buff for received data frames storage |
| * include any required allignment operations */ |
| skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2); |
| if (unlikely(skb == NULL)) { |
| /* error allocating an sk_buff structure elements */ |
| DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n"); |
| break; |
| } |
| skb_reserve(skb, (4 - (long) skb->data) & 0x03); |
| /* store the new skb structure pointer */ |
| index = index % ISL38XX_CB_RX_QSIZE; |
| priv->data_low_rx[index] = skb; |
| |
| #if VERBOSE > SHOW_ERROR_MESSAGES |
| DEBUG(SHOW_TRACING, |
| "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ", |
| skb, skb->data, skb->len, index, skb->truesize); |
| #endif |
| |
| /* set the streaming DMA mapping for proper PCI bus operation */ |
| priv->pci_map_rx_address[index] = |
| pci_map_single(priv->pdev, (void *) skb->data, |
| MAX_FRAGMENT_SIZE_RX + 2, |
| PCI_DMA_FROMDEVICE); |
| if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) { |
| /* error mapping the buffer to device accessable memory address */ |
| DEBUG(SHOW_ERROR_MESSAGES, |
| "Error mapping DMA address\n"); |
| |
| /* free the skbuf structure before aborting */ |
| dev_kfree_skb_irq((struct sk_buff *) skb); |
| skb = NULL; |
| break; |
| } |
| /* update the fragment address */ |
| control_block->rx_data_low[index].address = cpu_to_le32((u32) |
| priv-> |
| pci_map_rx_address |
| [index]); |
| wmb(); |
| |
| /* increment the driver read pointer */ |
| add_le32p((u32 *) &control_block-> |
| driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1); |
| } |
| |
| /* trigger the device */ |
| islpci_trigger(priv); |
| |
| return 0; |
| } |
| |
| void |
| islpci_do_reset_and_wake(void *data) |
| { |
| islpci_private *priv = (islpci_private *) data; |
| islpci_reset(priv, 1); |
| netif_wake_queue(priv->ndev); |
| priv->reset_task_pending = 0; |
| } |
| |
| void |
| islpci_eth_tx_timeout(struct net_device *ndev) |
| { |
| islpci_private *priv = netdev_priv(ndev); |
| struct net_device_stats *statistics = &priv->statistics; |
| |
| /* increment the transmit error counter */ |
| statistics->tx_errors++; |
| |
| printk(KERN_WARNING "%s: tx_timeout", ndev->name); |
| if (!priv->reset_task_pending) { |
| priv->reset_task_pending = 1; |
| printk(", scheduling a reset"); |
| netif_stop_queue(ndev); |
| schedule_work(&priv->reset_task); |
| } |
| printk("\n"); |
| } |