| /* |
| * ppi.c Analog Devices Parallel Peripheral Interface driver |
| * |
| * Copyright (c) 2011 Analog Devices Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include <asm/bfin_ppi.h> |
| #include <asm/blackfin.h> |
| #include <asm/cacheflush.h> |
| #include <asm/dma.h> |
| #include <asm/portmux.h> |
| |
| #include <media/blackfin/ppi.h> |
| |
| static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler); |
| static void ppi_detach_irq(struct ppi_if *ppi); |
| static int ppi_start(struct ppi_if *ppi); |
| static int ppi_stop(struct ppi_if *ppi); |
| static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params); |
| static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr); |
| |
| static const struct ppi_ops ppi_ops = { |
| .attach_irq = ppi_attach_irq, |
| .detach_irq = ppi_detach_irq, |
| .start = ppi_start, |
| .stop = ppi_stop, |
| .set_params = ppi_set_params, |
| .update_addr = ppi_update_addr, |
| }; |
| |
| static irqreturn_t ppi_irq_err(int irq, void *dev_id) |
| { |
| struct ppi_if *ppi = dev_id; |
| const struct ppi_info *info = ppi->info; |
| |
| switch (info->type) { |
| case PPI_TYPE_PPI: |
| { |
| struct bfin_ppi_regs *reg = info->base; |
| unsigned short status; |
| |
| /* register on bf561 is cleared when read |
| * others are W1C |
| */ |
| status = bfin_read16(®->status); |
| if (status & 0x3000) |
| ppi->err = true; |
| bfin_write16(®->status, 0xff00); |
| break; |
| } |
| case PPI_TYPE_EPPI: |
| { |
| struct bfin_eppi_regs *reg = info->base; |
| unsigned short status; |
| |
| status = bfin_read16(®->status); |
| if (status & 0x2) |
| ppi->err = true; |
| bfin_write16(®->status, 0xffff); |
| break; |
| } |
| case PPI_TYPE_EPPI3: |
| { |
| struct bfin_eppi3_regs *reg = info->base; |
| unsigned long stat; |
| |
| stat = bfin_read32(®->stat); |
| if (stat & 0x2) |
| ppi->err = true; |
| bfin_write32(®->stat, 0xc0ff); |
| break; |
| } |
| default: |
| break; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler) |
| { |
| const struct ppi_info *info = ppi->info; |
| int ret; |
| |
| ret = request_dma(info->dma_ch, "PPI_DMA"); |
| |
| if (ret) { |
| pr_err("Unable to allocate DMA channel for PPI\n"); |
| return ret; |
| } |
| set_dma_callback(info->dma_ch, handler, ppi); |
| |
| if (ppi->err_int) { |
| ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi); |
| if (ret) { |
| pr_err("Unable to allocate IRQ for PPI\n"); |
| free_dma(info->dma_ch); |
| } |
| } |
| return ret; |
| } |
| |
| static void ppi_detach_irq(struct ppi_if *ppi) |
| { |
| const struct ppi_info *info = ppi->info; |
| |
| if (ppi->err_int) |
| free_irq(info->irq_err, ppi); |
| free_dma(info->dma_ch); |
| } |
| |
| static int ppi_start(struct ppi_if *ppi) |
| { |
| const struct ppi_info *info = ppi->info; |
| |
| /* enable DMA */ |
| enable_dma(info->dma_ch); |
| |
| /* enable PPI */ |
| ppi->ppi_control |= PORT_EN; |
| switch (info->type) { |
| case PPI_TYPE_PPI: |
| { |
| struct bfin_ppi_regs *reg = info->base; |
| bfin_write16(®->control, ppi->ppi_control); |
| break; |
| } |
| case PPI_TYPE_EPPI: |
| { |
| struct bfin_eppi_regs *reg = info->base; |
| bfin_write32(®->control, ppi->ppi_control); |
| break; |
| } |
| case PPI_TYPE_EPPI3: |
| { |
| struct bfin_eppi3_regs *reg = info->base; |
| bfin_write32(®->ctl, ppi->ppi_control); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| SSYNC(); |
| return 0; |
| } |
| |
| static int ppi_stop(struct ppi_if *ppi) |
| { |
| const struct ppi_info *info = ppi->info; |
| |
| /* disable PPI */ |
| ppi->ppi_control &= ~PORT_EN; |
| switch (info->type) { |
| case PPI_TYPE_PPI: |
| { |
| struct bfin_ppi_regs *reg = info->base; |
| bfin_write16(®->control, ppi->ppi_control); |
| break; |
| } |
| case PPI_TYPE_EPPI: |
| { |
| struct bfin_eppi_regs *reg = info->base; |
| bfin_write32(®->control, ppi->ppi_control); |
| break; |
| } |
| case PPI_TYPE_EPPI3: |
| { |
| struct bfin_eppi3_regs *reg = info->base; |
| bfin_write32(®->ctl, ppi->ppi_control); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| /* disable DMA */ |
| clear_dma_irqstat(info->dma_ch); |
| disable_dma(info->dma_ch); |
| |
| SSYNC(); |
| return 0; |
| } |
| |
| static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params) |
| { |
| const struct ppi_info *info = ppi->info; |
| int dma32 = 0; |
| int dma_config, bytes_per_line; |
| int hcount, hdelay, samples_per_line; |
| |
| bytes_per_line = params->width * params->bpp / 8; |
| /* convert parameters unit from pixels to samples */ |
| hcount = params->width * params->bpp / params->dlen; |
| hdelay = params->hdelay * params->bpp / params->dlen; |
| samples_per_line = params->line * params->bpp / params->dlen; |
| if (params->int_mask == 0xFFFFFFFF) |
| ppi->err_int = false; |
| else |
| ppi->err_int = true; |
| |
| dma_config = (DMA_FLOW_STOP | RESTART | DMA2D | DI_EN_Y); |
| ppi->ppi_control = params->ppi_control & ~PORT_EN; |
| if (!(ppi->ppi_control & PORT_DIR)) |
| dma_config |= WNR; |
| switch (info->type) { |
| case PPI_TYPE_PPI: |
| { |
| struct bfin_ppi_regs *reg = info->base; |
| |
| if (params->ppi_control & DMA32) |
| dma32 = 1; |
| |
| bfin_write16(®->control, ppi->ppi_control); |
| bfin_write16(®->count, samples_per_line - 1); |
| bfin_write16(®->frame, params->frame); |
| break; |
| } |
| case PPI_TYPE_EPPI: |
| { |
| struct bfin_eppi_regs *reg = info->base; |
| |
| if ((params->ppi_control & PACK_EN) |
| || (params->ppi_control & 0x38000) > DLEN_16) |
| dma32 = 1; |
| |
| bfin_write32(®->control, ppi->ppi_control); |
| bfin_write16(®->line, samples_per_line); |
| bfin_write16(®->frame, params->frame); |
| bfin_write16(®->hdelay, hdelay); |
| bfin_write16(®->vdelay, params->vdelay); |
| bfin_write16(®->hcount, hcount); |
| bfin_write16(®->vcount, params->height); |
| break; |
| } |
| case PPI_TYPE_EPPI3: |
| { |
| struct bfin_eppi3_regs *reg = info->base; |
| |
| if ((params->ppi_control & PACK_EN) |
| || (params->ppi_control & 0x70000) > DLEN_16) |
| dma32 = 1; |
| |
| bfin_write32(®->ctl, ppi->ppi_control); |
| bfin_write32(®->line, samples_per_line); |
| bfin_write32(®->frame, params->frame); |
| bfin_write32(®->hdly, hdelay); |
| bfin_write32(®->vdly, params->vdelay); |
| bfin_write32(®->hcnt, hcount); |
| bfin_write32(®->vcnt, params->height); |
| if (params->int_mask) |
| bfin_write32(®->imsk, params->int_mask & 0xFF); |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| if (dma32) { |
| dma_config |= WDSIZE_32 | PSIZE_32; |
| set_dma_x_count(info->dma_ch, bytes_per_line >> 2); |
| set_dma_x_modify(info->dma_ch, 4); |
| set_dma_y_modify(info->dma_ch, 4); |
| } else { |
| dma_config |= WDSIZE_16 | PSIZE_16; |
| set_dma_x_count(info->dma_ch, bytes_per_line >> 1); |
| set_dma_x_modify(info->dma_ch, 2); |
| set_dma_y_modify(info->dma_ch, 2); |
| } |
| set_dma_y_count(info->dma_ch, params->height); |
| set_dma_config(info->dma_ch, dma_config); |
| |
| SSYNC(); |
| return 0; |
| } |
| |
| static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr) |
| { |
| set_dma_start_addr(ppi->info->dma_ch, addr); |
| } |
| |
| struct ppi_if *ppi_create_instance(const struct ppi_info *info) |
| { |
| struct ppi_if *ppi; |
| |
| if (!info || !info->pin_req) |
| return NULL; |
| |
| if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) { |
| pr_err("request peripheral failed\n"); |
| return NULL; |
| } |
| |
| ppi = kzalloc(sizeof(*ppi), GFP_KERNEL); |
| if (!ppi) { |
| peripheral_free_list(info->pin_req); |
| pr_err("unable to allocate memory for ppi handle\n"); |
| return NULL; |
| } |
| ppi->ops = &ppi_ops; |
| ppi->info = info; |
| |
| pr_info("ppi probe success\n"); |
| return ppi; |
| } |
| EXPORT_SYMBOL(ppi_create_instance); |
| |
| void ppi_delete_instance(struct ppi_if *ppi) |
| { |
| peripheral_free_list(ppi->info->pin_req); |
| kfree(ppi); |
| } |
| EXPORT_SYMBOL(ppi_delete_instance); |
| |
| MODULE_DESCRIPTION("Analog Devices PPI driver"); |
| MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |