blob: 3cb4941afeef9ab6cb121b4271d78c522ff771f8 [file] [log] [blame]
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "skeleton.dtsi"
#include "imx6sl-pinfunc.h"
#include <dt-bindings/clock/imx6sl-clock.h>
/ {
aliases {
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
spi3 = &ecspi4;
usbphy0 = &usbphy1;
usbphy1 = &usbphy2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
996000 1275000
792000 1175000
396000 975000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
996000 1225000
792000 1175000
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
<&clks IMX6SL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;
};
};
intc: interrupt-controller@00a01000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ckil {
compatible = "fixed-clock";
clock-frequency = <32768>;
};
osc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
ranges;
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
clocks = <&clks IMX6SL_CLK_OCRAM>;
};
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
arm,tag-latency = <4 2 3>;
arm,data-latency = <4 2 3>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
};
aips1: aips-bus@02000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x100000>;
ranges;
spba: spba-bus@02000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
spdif: spdif@02004000 {
reg = <0x02004000 0x4000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
ecspi1: ecspi@02008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI1>,
<&clks IMX6SL_CLK_ECSPI1>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@0200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI2>,
<&clks IMX6SL_CLK_ECSPI2>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: ecspi@02010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI3>,
<&clks IMX6SL_CLK_ECSPI3>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi4: ecspi@02014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ECSPI4>,
<&clks IMX6SL_CLK_ECSPI4>;
clock-names = "ipg", "per";
status = "disabled";
};
uart5: serial@02018000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02018000 0x4000>;
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart1: serial@02020000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@02024000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02024000 0x4000>;
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
ssi1: ssi@02028000 {
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI1>;
dmas = <&sdma 37 1 0>,
<&sdma 38 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
ssi2: ssi@0202c000 {
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI2>;
dmas = <&sdma 41 1 0>,
<&sdma 42 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
ssi3: ssi@02030000 {
compatible = "fsl,imx6sl-ssi",
"fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SSI3>;
dmas = <&sdma 45 1 0>,
<&sdma 46 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
uart3: serial@02034000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02034000 0x4000>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart4: serial@02038000 {
compatible = "fsl,imx6sl-uart",
"fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02038000 0x4000>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_UART>,
<&clks IMX6SL_CLK_UART_SERIAL>;
clock-names = "ipg", "per";
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
};
pwm1: pwm@02080000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM1>,
<&clks IMX6SL_CLK_PWM1>;
clock-names = "ipg", "per";
};
pwm2: pwm@02084000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM2>,
<&clks IMX6SL_CLK_PWM2>;
clock-names = "ipg", "per";
};
pwm3: pwm@02088000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM3>,
<&clks IMX6SL_CLK_PWM3>;
clock-names = "ipg", "per";
};
pwm4: pwm@0208c000 {
#pwm-cells = <2>;
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_PWM4>,
<&clks IMX6SL_CLK_PWM4>;
clock-names = "ipg", "per";
};
gpt: gpt@02098000 {
compatible = "fsl,imx6sl-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_GPT>,
<&clks IMX6SL_CLK_GPT_SERIAL>;
clock-names = "ipg", "per";
};
gpio1: gpio@0209c000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
<0 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
<0 69 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
<0 71 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
<0 73 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
<0 75 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
kpp: kpp@020b8000 {
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
};
wdog2: wdog@020c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_DUMMY>;
status = "disabled";
};
clks: ccm@020c4000 {
compatible = "fsl,imx6sl-ccm";
reg = <0x020c4000 0x4000>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
<0 88 IRQ_TYPE_LEVEL_HIGH>;
#clock-cells = <1>;
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6sl-anatop",
"fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1@110 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1375000>;
regulator-always-on;
anatop-reg-offset = <0x110>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <4>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1375000>;
};
regulator-3p0@120 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
anatop-reg-offset = <0x120>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2625000>;
anatop-max-voltage = <3400000>;
};
regulator-2p5@130 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
anatop-reg-offset = <0x130>;
anatop-vol-bit-shift = <8>;
anatop-vol-bit-width = <5>;
anatop-min-bit-val = <0>;
anatop-min-voltage = <2100000>;
anatop-max-voltage = <2850000>;
};
reg_arm: regulator-vddcore@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <0>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <24>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
reg_pu: regulator-vddpu@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <26>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
reg_soc: regulator-vddsoc@140 {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-always-on;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <18>;
anatop-vol-bit-width = <5>;
anatop-delay-reg-offset = <0x170>;
anatop-delay-bit-shift = <28>;
anatop-delay-bit-width = <2>;
anatop-min-bit-val = <1>;
anatop-min-voltage = <725000>;
anatop-max-voltage = <1450000>;
};
};
usbphy1: usbphy@020c9000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
};
usbphy2: usbphy@020ca000 {
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBPHY2>;
fsl,anatop = <&anatop>;
};
snvs@020cc000 {
compatible = "fsl,sec-v4.0-mon", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
epit1: epit@020d0000 {
reg = <0x020d0000 0x4000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
};
epit2: epit@020d4000 {
reg = <0x020d4000 0x4000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
};
src: src@020d8000 {
compatible = "fsl,imx6sl-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
<0 96 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@020dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
};
gpr: iomuxc-gpr@020e0000 {
compatible = "fsl,imx6sl-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x020e0000 0x38>;
};
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6sl-iomuxc";
reg = <0x020e0000 0x4000>;
};
csi: csi@020e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
spdc: spdc@020e8000 {
reg = <0x020e8000 0x4000>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_SDMA>,
<&clks IMX6SL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
/* imx6sl reuses imx6q sdma firmware */
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
pxp: pxp@020f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
};
epdc: epdc@020f4000 {
reg = <0x020f4000 0x4000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
};
lcdif: lcdif@020f8000 {
reg = <0x020f8000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
};
dcp: dcp@020fc000 {
reg = <0x020fc000 0x4000>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
};
};
aips2: aips-bus@02100000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02100000 0x100000>;
ranges;
usbotg1: usb@02184000 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
usbotg2: usb@02184200 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
usbh: usb@02184400 {
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
reg = <0x02184400 0x200>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
usbmisc: usbmisc@02184800 {
#index-cells = <1>;
compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
reg = <0x02184800 0x200>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
};
fec: ethernet@02188000 {
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_ENET_REF>,
<&clks IMX6SL_CLK_ENET_REF>;
clock-names = "ipg", "ahb";
status = "disabled";
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02190000 0x4000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>,
<&clks IMX6SL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc2: usdhc@02194000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02194000 0x4000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>,
<&clks IMX6SL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc3: usdhc@02198000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x02198000 0x4000>;
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>,
<&clks IMX6SL_CLK_USDHC3>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
usdhc4: usdhc@0219c000 {
compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
reg = <0x0219c000 0x4000>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>,
<&clks IMX6SL_CLK_USDHC4>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C1>;
status = "disabled";
};
i2c2: i2c@021a4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C2>;
status = "disabled";
};
i2c3: i2c@021a8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_I2C3>;
status = "disabled";
};
mmdc: mmdc@021b0000 {
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
reg = <0x021b0000 0x4000>;
};
rngb: rngb@021b4000 {
reg = <0x021b4000 0x4000>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
weim: weim@021b8000 {
reg = <0x021b8000 0x4000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
ocotp: ocotp@021bc000 {
compatible = "fsl,imx6sl-ocotp";
reg = <0x021bc000 0x4000>;
};
audmux: audmux@021d8000 {
compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
status = "disabled";
};
};
};
};