| /* |
| * Copyright (C) 2009 Intel Corporation. |
| * Author: Patrick Ohly <patrick.ohly@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/timecompare.h> |
| #include <linux/module.h> |
| #include <linux/math64.h> |
| |
| /* |
| * fixed point arithmetic scale factor for skew |
| * |
| * Usually one would measure skew in ppb (parts per billion, 1e9), but |
| * using a factor of 2 simplifies the math. |
| */ |
| #define TIMECOMPARE_SKEW_RESOLUTION (((s64)1)<<30) |
| |
| ktime_t timecompare_transform(struct timecompare *sync, |
| u64 source_tstamp) |
| { |
| u64 nsec; |
| |
| nsec = source_tstamp + sync->offset; |
| nsec += (s64)(source_tstamp - sync->last_update) * sync->skew / |
| TIMECOMPARE_SKEW_RESOLUTION; |
| |
| return ns_to_ktime(nsec); |
| } |
| EXPORT_SYMBOL(timecompare_transform); |
| |
| int timecompare_offset(struct timecompare *sync, |
| s64 *offset, |
| u64 *source_tstamp) |
| { |
| u64 start_source = 0, end_source = 0; |
| struct { |
| s64 offset; |
| s64 duration_target; |
| } buffer[10], sample, *samples; |
| int counter = 0, i; |
| int used; |
| int index; |
| int num_samples = sync->num_samples; |
| |
| if (num_samples > sizeof(buffer)/sizeof(buffer[0])) { |
| samples = kmalloc(sizeof(*samples) * num_samples, GFP_ATOMIC); |
| if (!samples) { |
| samples = buffer; |
| num_samples = sizeof(buffer)/sizeof(buffer[0]); |
| } |
| } else { |
| samples = buffer; |
| } |
| |
| /* run until we have enough valid samples, but do not try forever */ |
| i = 0; |
| counter = 0; |
| while (1) { |
| u64 ts; |
| ktime_t start, end; |
| |
| start = sync->target(); |
| ts = timecounter_read(sync->source); |
| end = sync->target(); |
| |
| if (!i) |
| start_source = ts; |
| |
| /* ignore negative durations */ |
| sample.duration_target = ktime_to_ns(ktime_sub(end, start)); |
| if (sample.duration_target >= 0) { |
| /* |
| * assume symetric delay to and from source: |
| * average target time corresponds to measured |
| * source time |
| */ |
| sample.offset = |
| ktime_to_ns(ktime_add(end, start)) / 2 - |
| ts; |
| |
| /* simple insertion sort based on duration */ |
| index = counter - 1; |
| while (index >= 0) { |
| if (samples[index].duration_target < |
| sample.duration_target) |
| break; |
| samples[index + 1] = samples[index]; |
| index--; |
| } |
| samples[index + 1] = sample; |
| counter++; |
| } |
| |
| i++; |
| if (counter >= num_samples || i >= 100000) { |
| end_source = ts; |
| break; |
| } |
| } |
| |
| *source_tstamp = (end_source + start_source) / 2; |
| |
| /* remove outliers by only using 75% of the samples */ |
| used = counter * 3 / 4; |
| if (!used) |
| used = counter; |
| if (used) { |
| /* calculate average */ |
| s64 off = 0; |
| for (index = 0; index < used; index++) |
| off += samples[index].offset; |
| *offset = div_s64(off, used); |
| } |
| |
| if (samples && samples != buffer) |
| kfree(samples); |
| |
| return used; |
| } |
| EXPORT_SYMBOL(timecompare_offset); |
| |
| void __timecompare_update(struct timecompare *sync, |
| u64 source_tstamp) |
| { |
| s64 offset; |
| u64 average_time; |
| |
| if (!timecompare_offset(sync, &offset, &average_time)) |
| return; |
| |
| if (!sync->last_update) { |
| sync->last_update = average_time; |
| sync->offset = offset; |
| sync->skew = 0; |
| } else { |
| s64 delta_nsec = average_time - sync->last_update; |
| |
| /* avoid division by negative or small deltas */ |
| if (delta_nsec >= 10000) { |
| s64 delta_offset_nsec = offset - sync->offset; |
| s64 skew; /* delta_offset_nsec * |
| TIMECOMPARE_SKEW_RESOLUTION / |
| delta_nsec */ |
| u64 divisor; |
| |
| /* div_s64() is limited to 32 bit divisor */ |
| skew = delta_offset_nsec * TIMECOMPARE_SKEW_RESOLUTION; |
| divisor = delta_nsec; |
| while (unlikely(divisor >= ((s64)1) << 32)) { |
| /* divide both by 2; beware, right shift |
| of negative value has undefined |
| behavior and can only be used for |
| the positive divisor */ |
| skew = div_s64(skew, 2); |
| divisor >>= 1; |
| } |
| skew = div_s64(skew, divisor); |
| |
| /* |
| * Calculate new overall skew as 4/16 the |
| * old value and 12/16 the new one. This is |
| * a rather arbitrary tradeoff between |
| * only using the latest measurement (0/16 and |
| * 16/16) and even more weight on past measurements. |
| */ |
| #define TIMECOMPARE_NEW_SKEW_PER_16 12 |
| sync->skew = |
| div_s64((16 - TIMECOMPARE_NEW_SKEW_PER_16) * |
| sync->skew + |
| TIMECOMPARE_NEW_SKEW_PER_16 * skew, |
| 16); |
| sync->last_update = average_time; |
| sync->offset = offset; |
| } |
| } |
| } |
| EXPORT_SYMBOL(__timecompare_update); |