| # |
| # Wireless LAN device configuration |
| # |
| |
| menuconfig WLAN |
| bool "Wireless LAN" |
| depends on !S390 |
| depends on NET |
| select WIRELESS |
| default y |
| ---help--- |
| This section contains all the pre 802.11 and 802.11 wireless |
| device drivers. For a complete list of drivers and documentation |
| on them refer to the wireless wiki: |
| |
| http://wireless.kernel.org/en/users/Drivers |
| |
| if WLAN |
| |
| config PCMCIA_RAYCS |
| tristate "Aviator/Raytheon 2.4GHz wireless support" |
| depends on PCMCIA |
| select WIRELESS_EXT |
| select WEXT_SPY |
| select WEXT_PRIV |
| ---help--- |
| Say Y here if you intend to attach an Aviator/Raytheon PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. |
| Please read the file <file:Documentation/networking/ray_cs.txt> for |
| details. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ray_cs. If unsure, say N. |
| |
| config LIBERTAS_THINFIRM |
| tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" |
| depends on MAC80211 |
| select FW_LOADER |
| ---help--- |
| A library for Marvell Libertas 8xxx devices using thinfirm. |
| |
| config LIBERTAS_THINFIRM_DEBUG |
| bool "Enable full debugging output in the Libertas thin firmware module." |
| depends on LIBERTAS_THINFIRM |
| ---help--- |
| Debugging support. |
| |
| config LIBERTAS_THINFIRM_USB |
| tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" |
| depends on LIBERTAS_THINFIRM && USB |
| ---help--- |
| A driver for Marvell Libertas 8388 USB devices using thinfirm. |
| |
| config AIRO |
| tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" |
| depends on ISA_DMA_API && (PCI || BROKEN) |
| select WIRELESS_EXT |
| select CRYPTO |
| select WEXT_SPY |
| select WEXT_PRIV |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet ISA and |
| PCI 802.11 wireless cards. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| The driver can be compiled as a module and will be named "airo". |
| |
| config ATMEL |
| tristate "Atmel at76c50x chipset 802.11b support" |
| depends on (PCI || PCMCIA) |
| select WIRELESS_EXT |
| select WEXT_PRIV |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| A driver 802.11b wireless cards based on the Atmel fast-vnet |
| chips. This driver supports standard Linux wireless extensions. |
| |
| Many cards based on this chipset do not have flash memory |
| and need their firmware loaded at start-up. If yours is |
| one of these, you will need to provide a firmware image |
| to be loaded into the card by the driver. The Atmel |
| firmware package can be downloaded from |
| <http://www.thekelleys.org.uk/atmel> |
| |
| config PCI_ATMEL |
| tristate "Atmel at76c506 PCI cards" |
| depends on ATMEL && PCI |
| ---help--- |
| Enable support for PCI and mini-PCI cards containing the |
| Atmel at76c506 chip. |
| |
| config PCMCIA_ATMEL |
| tristate "Atmel at76c502/at76c504 PCMCIA cards" |
| depends on ATMEL && PCMCIA |
| select WIRELESS_EXT |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| Enable support for PCMCIA cards containing the |
| Atmel at76c502 and at76c504 chips. |
| |
| config AT76C50X_USB |
| tristate "Atmel at76c503/at76c505/at76c505a USB cards" |
| depends on MAC80211 && USB |
| select FW_LOADER |
| ---help--- |
| Enable support for USB Wireless devices using Atmel at76c503, |
| at76c505 or at76c505a chips. |
| |
| config AIRO_CS |
| tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" |
| depends on PCMCIA && (BROKEN || !M32R) |
| select WIRELESS_EXT |
| select WEXT_SPY |
| select WEXT_PRIV |
| select CRYPTO |
| select CRYPTO_AES |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet PCMCIA |
| 802.11 wireless cards. This driver is the same as the Aironet |
| driver part of the Linux Pcmcia package. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also |
| supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom |
| 802.11b cards. |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| config PCMCIA_WL3501 |
| tristate "Planet WL3501 PCMCIA cards" |
| depends on PCMCIA |
| select WIRELESS_EXT |
| select WEXT_SPY |
| help |
| A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. |
| It has basic support for Linux wireless extensions and initial |
| micro support for ethtool. |
| |
| config PRISM54 |
| tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' |
| depends on PCI |
| select WIRELESS_EXT |
| select WEXT_SPY |
| select WEXT_PRIV |
| select FW_LOADER |
| ---help--- |
| This enables support for FullMAC PCI/Cardbus prism54 devices. This |
| driver is now deprecated in favor for the SoftMAC driver, p54pci. |
| p54pci supports FullMAC PCI/Cardbus devices as well. |
| |
| For more information refer to the p54 wiki: |
| |
| http://wireless.kernel.org/en/users/Drivers/p54 |
| |
| Note: You need a motherboard with DMA support to use any of these cards |
| |
| When built as module you get the module prism54 |
| |
| config USB_ZD1201 |
| tristate "USB ZD1201 based Wireless device support" |
| depends on USB |
| select WIRELESS_EXT |
| select WEXT_PRIV |
| select FW_LOADER |
| ---help--- |
| Say Y if you want to use wireless LAN adapters based on the ZyDAS |
| ZD1201 chip. |
| |
| This driver makes the adapter appear as a normal Ethernet interface, |
| typically on wlan0. |
| |
| The zd1201 device requires external firmware to be loaded. |
| This can be found at http://linux-lc100020.sourceforge.net/ |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zd1201. |
| |
| config USB_NET_RNDIS_WLAN |
| tristate "Wireless RNDIS USB support" |
| depends on USB |
| depends on CFG80211 |
| select USB_USBNET |
| select USB_NET_CDCETHER |
| select USB_NET_RNDIS_HOST |
| ---help--- |
| This is a driver for wireless RNDIS devices. |
| These are USB based adapters found in devices such as: |
| |
| Buffalo WLI-U2-KG125S |
| U.S. Robotics USR5421 |
| Belkin F5D7051 |
| Linksys WUSB54GSv2 |
| Linksys WUSB54GSC |
| Asus WL169gE |
| Eminent EM4045 |
| BT Voyager 1055 |
| Linksys WUSB54GSv1 |
| U.S. Robotics USR5420 |
| BUFFALO WLI-USB-G54 |
| |
| All of these devices are based on Broadcom 4320 chip which is the |
| only wireless RNDIS chip known to date. |
| |
| If you choose to build a module, it'll be called rndis_wlan. |
| |
| source "drivers/net/wireless/rtl818x/Kconfig" |
| |
| config ADM8211 |
| tristate "ADMtek ADM8211 support" |
| depends on MAC80211 && PCI |
| select CRC32 |
| select EEPROM_93CX6 |
| ---help--- |
| This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. |
| These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: |
| |
| Xterasys Cardbus XN-2411b |
| Blitz NetWave Point PC |
| TrendNet 221pc |
| Belkin F5D6001 |
| SMC 2635W |
| Linksys WPC11 v1 |
| Fiberline FL-WL-200X |
| 3com Office Connect (3CRSHPW796) |
| Corega WLPCIB-11 |
| SMC 2602W V2 EU |
| D-Link DWL-520 Revision C |
| |
| However, some of these cards have been replaced with other chips |
| like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or |
| the Ralink RT2400 (SMC2635W) without a model number change. |
| |
| Thanks to Infineon-ADMtek for their support of this driver. |
| |
| config MAC80211_HWSIM |
| tristate "Simulated radio testing tool for mac80211" |
| depends on MAC80211 |
| ---help--- |
| This driver is a developer testing tool that can be used to test |
| IEEE 802.11 networking stack (mac80211) functionality. This is not |
| needed for normal wireless LAN usage and is only for testing. See |
| Documentation/networking/mac80211_hwsim for more information on how |
| to use this tool. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called mac80211_hwsim. If unsure, say N. |
| |
| config MWL8K |
| tristate "Marvell 88W8xxx PCI/PCIe Wireless support" |
| depends on MAC80211 && PCI |
| ---help--- |
| This driver supports Marvell TOPDOG 802.11 wireless cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called mwl8k. If unsure, say N. |
| |
| source "drivers/net/wireless/ath/Kconfig" |
| source "drivers/net/wireless/b43/Kconfig" |
| source "drivers/net/wireless/b43legacy/Kconfig" |
| source "drivers/net/wireless/brcm80211/Kconfig" |
| source "drivers/net/wireless/hostap/Kconfig" |
| source "drivers/net/wireless/ipw2x00/Kconfig" |
| source "drivers/net/wireless/iwlwifi/Kconfig" |
| source "drivers/net/wireless/iwlegacy/Kconfig" |
| source "drivers/net/wireless/libertas/Kconfig" |
| source "drivers/net/wireless/orinoco/Kconfig" |
| source "drivers/net/wireless/p54/Kconfig" |
| source "drivers/net/wireless/rt2x00/Kconfig" |
| source "drivers/net/wireless/rtlwifi/Kconfig" |
| source "drivers/net/wireless/ti/Kconfig" |
| source "drivers/net/wireless/zd1211rw/Kconfig" |
| source "drivers/net/wireless/mwifiex/Kconfig" |
| source "drivers/net/wireless/cw1200/Kconfig" |
| |
| endif # WLAN |
