| /* |
| * linux/include/asm-arm/arch-pxa/balloon3.h |
| * |
| * Authors: Nick Bane and Wookey |
| * Created: Oct, 2005 |
| * Copyright: Toby Churchill Ltd |
| * Cribbed from mainstone.c, by Nicholas Pitre |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef ASM_ARCH_BALLOON3_H |
| #define ASM_ARCH_BALLOON3_H |
| |
| enum balloon3_features { |
| BALLOON3_FEATURE_OHCI, |
| BALLOON3_FEATURE_MMC, |
| BALLOON3_FEATURE_CF, |
| BALLOON3_FEATURE_AUDIO, |
| BALLOON3_FEATURE_TOPPOLY, |
| }; |
| |
| #define BALLOON3_FPGA_PHYS PXA_CS4_PHYS |
| #define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */ |
| #define BALLOON3_FPGA_LENGTH 0x01000000 |
| |
| /* FPGA/CPLD registers */ |
| #define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008) |
| /* fixme - same for now */ |
| #define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008) |
| #define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000) |
| /* fpga/cpld interrupt control register */ |
| #define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C) |
| #define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010) |
| #define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014) |
| #define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c) |
| |
| #define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000) |
| #define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004) |
| #define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c) |
| |
| /* GPIOs for irqs */ |
| #define BALLOON3_GPIO_AUX_NIRQ (94) |
| #define BALLOON3_GPIO_CODEC_IRQ (95) |
| |
| /* Timer and Idle LED locations */ |
| #define BALLOON3_GPIO_LED_NAND (9) |
| #define BALLOON3_GPIO_LED_IDLE (10) |
| |
| /* backlight control */ |
| #define BALLOON3_GPIO_RUN_BACKLIGHT (99) |
| |
| #define BALLOON3_GPIO_S0_CD (105) |
| |
| /* FPGA Interrupt Mask/Acknowledge Register */ |
| #define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */ |
| #define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */ |
| |
| /* CF Status Register */ |
| #define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */ |
| #define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1) |
| /* VDD sense / card status changed */ |
| |
| /* CF control register (write) */ |
| #define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */ |
| #define BALLOON3_PCMCIA_ENABLE (1 << 1) |
| #define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2) |
| |
| /* CPLD (and FPGA) interface definitions */ |
| #define CPLD_LCD0_DATA_SET 0x00 |
| #define CPLD_LCD0_DATA_CLR 0x10 |
| #define CPLD_LCD0_COMMAND_SET 0x01 |
| #define CPLD_LCD0_COMMAND_CLR 0x11 |
| #define CPLD_LCD1_DATA_SET 0x02 |
| #define CPLD_LCD1_DATA_CLR 0x12 |
| #define CPLD_LCD1_COMMAND_SET 0x03 |
| #define CPLD_LCD1_COMMAND_CLR 0x13 |
| |
| #define CPLD_MISC_SET 0x07 |
| #define CPLD_MISC_CLR 0x17 |
| #define CPLD_MISC_LOON_NRESET_BIT 0 |
| #define CPLD_MISC_LOON_UNSUSP_BIT 1 |
| #define CPLD_MISC_RUN_5V_BIT 2 |
| #define CPLD_MISC_CHG_D0_BIT 3 |
| #define CPLD_MISC_CHG_D1_BIT 4 |
| #define CPLD_MISC_DAC_NCS_BIT 5 |
| |
| #define CPLD_LCD_SET 0x08 |
| #define CPLD_LCD_CLR 0x18 |
| #define CPLD_LCD_BACKLIGHT_EN_0_BIT 0 |
| #define CPLD_LCD_BACKLIGHT_EN_1_BIT 1 |
| #define CPLD_LCD_LED_RED_BIT 4 |
| #define CPLD_LCD_LED_GREEN_BIT 5 |
| #define CPLD_LCD_NRESET_BIT 7 |
| |
| #define CPLD_LCD_RO_SET 0x09 |
| #define CPLD_LCD_RO_CLR 0x19 |
| #define CPLD_LCD_RO_LCD0_nWAIT_BIT 0 |
| #define CPLD_LCD_RO_LCD1_nWAIT_BIT 1 |
| |
| #define CPLD_SERIAL_SET 0x0a |
| #define CPLD_SERIAL_CLR 0x1a |
| #define CPLD_SERIAL_GSM_RI_BIT 0 |
| #define CPLD_SERIAL_GSM_CTS_BIT 1 |
| #define CPLD_SERIAL_GSM_DTR_BIT 2 |
| #define CPLD_SERIAL_LPR_CTS_BIT 3 |
| #define CPLD_SERIAL_TC232_CTS_BIT 4 |
| #define CPLD_SERIAL_TC232_DSR_BIT 5 |
| |
| #define CPLD_SROUTING_SET 0x0b |
| #define CPLD_SROUTING_CLR 0x1b |
| #define CPLD_SROUTING_MSP430_LPR 0 |
| #define CPLD_SROUTING_MSP430_TC232 1 |
| #define CPLD_SROUTING_MSP430_GSM 2 |
| #define CPLD_SROUTING_LOON_LPR (0 << 4) |
| #define CPLD_SROUTING_LOON_TC232 (1 << 4) |
| #define CPLD_SROUTING_LOON_GSM (2 << 4) |
| |
| #define CPLD_AROUTING_SET 0x0c |
| #define CPLD_AROUTING_CLR 0x1c |
| #define CPLD_AROUTING_MIC2PHONE_BIT 0 |
| #define CPLD_AROUTING_PHONE2INT_BIT 1 |
| #define CPLD_AROUTING_PHONE2EXT_BIT 2 |
| #define CPLD_AROUTING_LOONL2INT_BIT 3 |
| #define CPLD_AROUTING_LOONL2EXT_BIT 4 |
| #define CPLD_AROUTING_LOONR2PHONE_BIT 5 |
| #define CPLD_AROUTING_LOONR2INT_BIT 6 |
| #define CPLD_AROUTING_LOONR2EXT_BIT 7 |
| |
| extern int balloon3_has(enum balloon3_features feature); |
| |
| #endif |
