drivers/staging/nokia_h4p/nokia_fw-bcm.c

/*
 * This file is part of Nokia H4P bluetooth driver
 *
 * Copyright (C) 2005-2008 Nokia Corporation.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
 * 02110-1301 USA
 *
 */

#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/serial_reg.h>

#include "hci_h4p.h"

static int hci_h4p_bcm_set_bdaddr(struct hci_h4p_info *info,
				struct sk_buff *skb)
{
	int i;
	static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
	int not_valid;

	not_valid = 1;
	for (i = 0; i < 6; i++) {
		if (info->bd_addr[i] != 0x00) {
			not_valid = 0;
			break;
		}
	}

	if (not_valid) {
		dev_info(info->dev, "Valid bluetooth address not found, setting some random\n");
		/* When address is not valid, use some random but Nokia MAC */
		memcpy(info->bd_addr, nokia_oui, 3);
		get_random_bytes(info->bd_addr + 3, 3);
	}

	for (i = 0; i < 6; i++)
		skb->data[9 - i] = info->bd_addr[i];

	return 0;
}

void hci_h4p_bcm_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
{
	struct sk_buff *fw_skb;
	int err;
	unsigned long flags;

	if (skb->data[5] != 0x00) {
		dev_err(info->dev, "Firmware sending command failed 0x%.2x\n",
			skb->data[5]);
		info->fw_error = -EPROTO;
	}

	kfree_skb(skb);

	fw_skb = skb_dequeue(info->fw_q);
	if (fw_skb == NULL || info->fw_error) {
		complete(&info->fw_completion);
		return;
	}

	if (fw_skb->data[1] == 0x01 && fw_skb->data[2] == 0xfc && fw_skb->len >= 10) {
		BT_DBG("Setting bluetooth address");
		err = hci_h4p_bcm_set_bdaddr(info, fw_skb);
		if (err < 0) {
			kfree_skb(fw_skb);
			info->fw_error = err;
			complete(&info->fw_completion);
			return;
		}
	}

	skb_queue_tail(&info->txq, fw_skb);
	spin_lock_irqsave(&info->lock, flags);
	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
			UART_IER_THRI);
	spin_unlock_irqrestore(&info->lock, flags);
}


int hci_h4p_bcm_send_fw(struct hci_h4p_info *info,
			struct sk_buff_head *fw_queue)
{
	struct sk_buff *skb;
	unsigned long flags, time;

	info->fw_error = 0;

	BT_DBG("Sending firmware");

	time = jiffies;

	info->fw_q = fw_queue;
	skb = skb_dequeue(fw_queue);
	if (!skb)
		return -ENODATA;

	BT_DBG("Sending commands");

	/*
	 * Disable smart-idle as UART TX interrupts
	 * are not wake-up capable
	 */
	hci_h4p_smart_idle(info, 0);

	/* Check if this is bd_address packet */
	init_completion(&info->fw_completion);
	skb_queue_tail(&info->txq, skb);
	spin_lock_irqsave(&info->lock, flags);
	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
			UART_IER_THRI);
	spin_unlock_irqrestore(&info->lock, flags);

	if (!wait_for_completion_timeout(&info->fw_completion,
				msecs_to_jiffies(2000))) {
		dev_err(info->dev, "No reply to fw command\n");
		return -ETIMEDOUT;
	}

	if (info->fw_error) {
		dev_err(info->dev, "FW error\n");
		return -EPROTO;
	}

	BT_DBG("Firmware sent in %d msecs",
		   jiffies_to_msecs(jiffies-time));

	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
	hci_h4p_set_rts(info, 0);
	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
	hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);

	return 0;
}