| /* |
| * arch/xtensa/kernel/setup.c |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| * Copyright (C) 2001 - 2005 Tensilica Inc. |
| * |
| * Chris Zankel <chris@zankel.net> |
| * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com> |
| * Kevin Chea |
| * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca> |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/mm.h> |
| #include <linux/proc_fs.h> |
| #include <linux/screen_info.h> |
| #include <linux/bootmem.h> |
| #include <linux/kernel.h> |
| #include <linux/percpu.h> |
| #include <linux/clk-provider.h> |
| #include <linux/cpu.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_platform.h> |
| |
| #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) |
| # include <linux/console.h> |
| #endif |
| |
| #ifdef CONFIG_RTC |
| # include <linux/timex.h> |
| #endif |
| |
| #ifdef CONFIG_PROC_FS |
| # include <linux/seq_file.h> |
| #endif |
| |
| #include <asm/bootparam.h> |
| #include <asm/mmu_context.h> |
| #include <asm/pgtable.h> |
| #include <asm/processor.h> |
| #include <asm/timex.h> |
| #include <asm/platform.h> |
| #include <asm/page.h> |
| #include <asm/setup.h> |
| #include <asm/param.h> |
| #include <asm/traps.h> |
| #include <asm/smp.h> |
| #include <asm/sysmem.h> |
| |
| #include <platform/hardware.h> |
| |
| #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) |
| struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16}; |
| #endif |
| |
| #ifdef CONFIG_BLK_DEV_FD |
| extern struct fd_ops no_fd_ops; |
| struct fd_ops *fd_ops; |
| #endif |
| |
| extern struct rtc_ops no_rtc_ops; |
| struct rtc_ops *rtc_ops; |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| extern unsigned long initrd_start; |
| extern unsigned long initrd_end; |
| int initrd_is_mapped = 0; |
| extern int initrd_below_start_ok; |
| #endif |
| |
| #ifdef CONFIG_OF |
| extern u32 __dtb_start[]; |
| void *dtb_start = __dtb_start; |
| #endif |
| |
| unsigned char aux_device_present; |
| extern unsigned long loops_per_jiffy; |
| |
| /* Command line specified as configuration option. */ |
| |
| static char __initdata command_line[COMMAND_LINE_SIZE]; |
| |
| #ifdef CONFIG_CMDLINE_BOOL |
| static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; |
| #endif |
| |
| /* |
| * Boot parameter parsing. |
| * |
| * The Xtensa port uses a list of variable-sized tags to pass data to |
| * the kernel. The first tag must be a BP_TAG_FIRST tag for the list |
| * to be recognised. The list is terminated with a zero-sized |
| * BP_TAG_LAST tag. |
| */ |
| |
| typedef struct tagtable { |
| u32 tag; |
| int (*parse)(const bp_tag_t*); |
| } tagtable_t; |
| |
| #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \ |
| __attribute__((used, section(".taglist"))) = { tag, fn } |
| |
| /* parse current tag */ |
| |
| static int __init parse_tag_mem(const bp_tag_t *tag) |
| { |
| struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data); |
| |
| if (mi->type != MEMORY_TYPE_CONVENTIONAL) |
| return -1; |
| |
| return add_sysmem_bank(mi->start, mi->end); |
| } |
| |
| __tagtable(BP_TAG_MEMORY, parse_tag_mem); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| |
| static int __init parse_tag_initrd(const bp_tag_t* tag) |
| { |
| struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data); |
| |
| initrd_start = (unsigned long)__va(mi->start); |
| initrd_end = (unsigned long)__va(mi->end); |
| |
| return 0; |
| } |
| |
| __tagtable(BP_TAG_INITRD, parse_tag_initrd); |
| |
| #ifdef CONFIG_OF |
| |
| static int __init parse_tag_fdt(const bp_tag_t *tag) |
| { |
| dtb_start = __va(tag->data[0]); |
| return 0; |
| } |
| |
| __tagtable(BP_TAG_FDT, parse_tag_fdt); |
| |
| #endif /* CONFIG_OF */ |
| |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| |
| static int __init parse_tag_cmdline(const bp_tag_t* tag) |
| { |
| strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE); |
| return 0; |
| } |
| |
| __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline); |
| |
| static int __init parse_bootparam(const bp_tag_t* tag) |
| { |
| extern tagtable_t __tagtable_begin, __tagtable_end; |
| tagtable_t *t; |
| |
| /* Boot parameters must start with a BP_TAG_FIRST tag. */ |
| |
| if (tag->id != BP_TAG_FIRST) { |
| printk(KERN_WARNING "Invalid boot parameters!\n"); |
| return 0; |
| } |
| |
| tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size); |
| |
| /* Parse all tags. */ |
| |
| while (tag != NULL && tag->id != BP_TAG_LAST) { |
| for (t = &__tagtable_begin; t < &__tagtable_end; t++) { |
| if (tag->id == t->tag) { |
| t->parse(tag); |
| break; |
| } |
| } |
| if (t == &__tagtable_end) |
| printk(KERN_WARNING "Ignoring tag " |
| "0x%08x\n", tag->id); |
| tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| bool __initdata dt_memory_scan = false; |
| |
| #if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY |
| unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR; |
| EXPORT_SYMBOL(xtensa_kio_paddr); |
| |
| static int __init xtensa_dt_io_area(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| const __be32 *ranges; |
| unsigned long len; |
| |
| if (depth > 1) |
| return 0; |
| |
| if (!of_flat_dt_is_compatible(node, "simple-bus")) |
| return 0; |
| |
| ranges = of_get_flat_dt_prop(node, "ranges", &len); |
| if (!ranges) |
| return 1; |
| if (len == 0) |
| return 1; |
| |
| xtensa_kio_paddr = of_read_ulong(ranges+1, 1); |
| /* round down to nearest 256MB boundary */ |
| xtensa_kio_paddr &= 0xf0000000; |
| |
| return 1; |
| } |
| #else |
| static int __init xtensa_dt_io_area(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| return 1; |
| } |
| #endif |
| |
| void __init early_init_dt_add_memory_arch(u64 base, u64 size) |
| { |
| if (!dt_memory_scan) |
| return; |
| |
| size &= PAGE_MASK; |
| add_sysmem_bank(base, base + size); |
| } |
| |
| void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) |
| { |
| return __alloc_bootmem(size, align, 0); |
| } |
| |
| void __init early_init_devtree(void *params) |
| { |
| if (sysmem.nr_banks == 0) |
| dt_memory_scan = true; |
| |
| early_init_dt_scan(params); |
| of_scan_flat_dt(xtensa_dt_io_area, NULL); |
| |
| if (!command_line[0]) |
| strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); |
| } |
| |
| static int __init xtensa_device_probe(void) |
| { |
| of_clk_init(NULL); |
| of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); |
| return 0; |
| } |
| |
| device_initcall(xtensa_device_probe); |
| |
| #endif /* CONFIG_OF */ |
| |
| /* |
| * Initialize architecture. (Early stage) |
| */ |
| |
| void __init init_arch(bp_tag_t *bp_start) |
| { |
| /* Parse boot parameters */ |
| |
| if (bp_start) |
| parse_bootparam(bp_start); |
| |
| #ifdef CONFIG_OF |
| early_init_devtree(dtb_start); |
| #endif |
| |
| if (sysmem.nr_banks == 0) { |
| add_sysmem_bank(PLATFORM_DEFAULT_MEM_START, |
| PLATFORM_DEFAULT_MEM_START + |
| PLATFORM_DEFAULT_MEM_SIZE); |
| } |
| |
| #ifdef CONFIG_CMDLINE_BOOL |
| if (!command_line[0]) |
| strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE); |
| #endif |
| |
| /* Early hook for platforms */ |
| |
| platform_init(bp_start); |
| |
| /* Initialize MMU. */ |
| |
| init_mmu(); |
| } |
| |
| /* |
| * Initialize system. Setup memory and reserve regions. |
| */ |
| |
| extern char _end; |
| extern char _stext; |
| extern char _WindowVectors_text_start; |
| extern char _WindowVectors_text_end; |
| extern char _DebugInterruptVector_literal_start; |
| extern char _DebugInterruptVector_text_end; |
| extern char _KernelExceptionVector_literal_start; |
| extern char _KernelExceptionVector_text_end; |
| extern char _UserExceptionVector_literal_start; |
| extern char _UserExceptionVector_text_end; |
| extern char _DoubleExceptionVector_literal_start; |
| extern char _DoubleExceptionVector_text_end; |
| #if XCHAL_EXCM_LEVEL >= 2 |
| extern char _Level2InterruptVector_text_start; |
| extern char _Level2InterruptVector_text_end; |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 3 |
| extern char _Level3InterruptVector_text_start; |
| extern char _Level3InterruptVector_text_end; |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 4 |
| extern char _Level4InterruptVector_text_start; |
| extern char _Level4InterruptVector_text_end; |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 5 |
| extern char _Level5InterruptVector_text_start; |
| extern char _Level5InterruptVector_text_end; |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 6 |
| extern char _Level6InterruptVector_text_start; |
| extern char _Level6InterruptVector_text_end; |
| #endif |
| |
| |
| |
| #ifdef CONFIG_S32C1I_SELFTEST |
| #if XCHAL_HAVE_S32C1I |
| |
| static int __initdata rcw_word, rcw_probe_pc, rcw_exc; |
| |
| /* |
| * Basic atomic compare-and-swap, that records PC of S32C1I for probing. |
| * |
| * If *v == cmp, set *v = set. Return previous *v. |
| */ |
| static inline int probed_compare_swap(int *v, int cmp, int set) |
| { |
| int tmp; |
| |
| __asm__ __volatile__( |
| " movi %1, 1f\n" |
| " s32i %1, %4, 0\n" |
| " wsr %2, scompare1\n" |
| "1: s32c1i %0, %3, 0\n" |
| : "=a" (set), "=&a" (tmp) |
| : "a" (cmp), "a" (v), "a" (&rcw_probe_pc), "0" (set) |
| : "memory" |
| ); |
| return set; |
| } |
| |
| /* Handle probed exception */ |
| |
| static void __init do_probed_exception(struct pt_regs *regs, |
| unsigned long exccause) |
| { |
| if (regs->pc == rcw_probe_pc) { /* exception on s32c1i ? */ |
| regs->pc += 3; /* skip the s32c1i instruction */ |
| rcw_exc = exccause; |
| } else { |
| do_unhandled(regs, exccause); |
| } |
| } |
| |
| /* Simple test of S32C1I (soc bringup assist) */ |
| |
| static int __init check_s32c1i(void) |
| { |
| int n, cause1, cause2; |
| void *handbus, *handdata, *handaddr; /* temporarily saved handlers */ |
| |
| rcw_probe_pc = 0; |
| handbus = trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, |
| do_probed_exception); |
| handdata = trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, |
| do_probed_exception); |
| handaddr = trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, |
| do_probed_exception); |
| |
| /* First try an S32C1I that does not store: */ |
| rcw_exc = 0; |
| rcw_word = 1; |
| n = probed_compare_swap(&rcw_word, 0, 2); |
| cause1 = rcw_exc; |
| |
| /* took exception? */ |
| if (cause1 != 0) { |
| /* unclean exception? */ |
| if (n != 2 || rcw_word != 1) |
| panic("S32C1I exception error"); |
| } else if (rcw_word != 1 || n != 1) { |
| panic("S32C1I compare error"); |
| } |
| |
| /* Then an S32C1I that stores: */ |
| rcw_exc = 0; |
| rcw_word = 0x1234567; |
| n = probed_compare_swap(&rcw_word, 0x1234567, 0xabcde); |
| cause2 = rcw_exc; |
| |
| if (cause2 != 0) { |
| /* unclean exception? */ |
| if (n != 0xabcde || rcw_word != 0x1234567) |
| panic("S32C1I exception error (b)"); |
| } else if (rcw_word != 0xabcde || n != 0x1234567) { |
| panic("S32C1I store error"); |
| } |
| |
| /* Verify consistency of exceptions: */ |
| if (cause1 || cause2) { |
| pr_warn("S32C1I took exception %d, %d\n", cause1, cause2); |
| /* If emulation of S32C1I upon bus error gets implemented, |
| we can get rid of this panic for single core (not SMP) */ |
| panic("S32C1I exceptions not currently supported"); |
| } |
| if (cause1 != cause2) |
| panic("inconsistent S32C1I exceptions"); |
| |
| trap_set_handler(EXCCAUSE_LOAD_STORE_ERROR, handbus); |
| trap_set_handler(EXCCAUSE_LOAD_STORE_DATA_ERROR, handdata); |
| trap_set_handler(EXCCAUSE_LOAD_STORE_ADDR_ERROR, handaddr); |
| return 0; |
| } |
| |
| #else /* XCHAL_HAVE_S32C1I */ |
| |
| /* This condition should not occur with a commercially deployed processor. |
| Display reminder for early engr test or demo chips / FPGA bitstreams */ |
| static int __init check_s32c1i(void) |
| { |
| pr_warn("Processor configuration lacks atomic compare-and-swap support!\n"); |
| return 0; |
| } |
| |
| #endif /* XCHAL_HAVE_S32C1I */ |
| early_initcall(check_s32c1i); |
| #endif /* CONFIG_S32C1I_SELFTEST */ |
| |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); |
| *cmdline_p = command_line; |
| |
| /* Reserve some memory regions */ |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (initrd_start < initrd_end) { |
| initrd_is_mapped = mem_reserve(__pa(initrd_start), |
| __pa(initrd_end), 0) == 0; |
| initrd_below_start_ok = 1; |
| } else { |
| initrd_start = 0; |
| } |
| #endif |
| |
| mem_reserve(__pa(&_stext),__pa(&_end), 1); |
| |
| mem_reserve(__pa(&_WindowVectors_text_start), |
| __pa(&_WindowVectors_text_end), 0); |
| |
| mem_reserve(__pa(&_DebugInterruptVector_literal_start), |
| __pa(&_DebugInterruptVector_text_end), 0); |
| |
| mem_reserve(__pa(&_KernelExceptionVector_literal_start), |
| __pa(&_KernelExceptionVector_text_end), 0); |
| |
| mem_reserve(__pa(&_UserExceptionVector_literal_start), |
| __pa(&_UserExceptionVector_text_end), 0); |
| |
| mem_reserve(__pa(&_DoubleExceptionVector_literal_start), |
| __pa(&_DoubleExceptionVector_text_end), 0); |
| |
| #if XCHAL_EXCM_LEVEL >= 2 |
| mem_reserve(__pa(&_Level2InterruptVector_text_start), |
| __pa(&_Level2InterruptVector_text_end), 0); |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 3 |
| mem_reserve(__pa(&_Level3InterruptVector_text_start), |
| __pa(&_Level3InterruptVector_text_end), 0); |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 4 |
| mem_reserve(__pa(&_Level4InterruptVector_text_start), |
| __pa(&_Level4InterruptVector_text_end), 0); |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 5 |
| mem_reserve(__pa(&_Level5InterruptVector_text_start), |
| __pa(&_Level5InterruptVector_text_end), 0); |
| #endif |
| #if XCHAL_EXCM_LEVEL >= 6 |
| mem_reserve(__pa(&_Level6InterruptVector_text_start), |
| __pa(&_Level6InterruptVector_text_end), 0); |
| #endif |
| |
| parse_early_param(); |
| bootmem_init(); |
| |
| unflatten_and_copy_device_tree(); |
| |
| platform_setup(cmdline_p); |
| |
| #ifdef CONFIG_SMP |
| smp_init_cpus(); |
| #endif |
| |
| paging_init(); |
| zones_init(); |
| |
| #ifdef CONFIG_VT |
| # if defined(CONFIG_VGA_CONSOLE) |
| conswitchp = &vga_con; |
| # elif defined(CONFIG_DUMMY_CONSOLE) |
| conswitchp = &dummy_con; |
| # endif |
| #endif |
| |
| #ifdef CONFIG_PCI |
| platform_pcibios_init(); |
| #endif |
| } |
| |
| static DEFINE_PER_CPU(struct cpu, cpu_data); |
| |
| static int __init topology_init(void) |
| { |
| int i; |
| |
| for_each_possible_cpu(i) { |
| struct cpu *cpu = &per_cpu(cpu_data, i); |
| cpu->hotpluggable = !!i; |
| register_cpu(cpu, i); |
| } |
| |
| return 0; |
| } |
| subsys_initcall(topology_init); |
| |
| void machine_restart(char * cmd) |
| { |
| platform_restart(); |
| } |
| |
| void machine_halt(void) |
| { |
| platform_halt(); |
| while (1); |
| } |
| |
| void machine_power_off(void) |
| { |
| platform_power_off(); |
| while (1); |
| } |
| #ifdef CONFIG_PROC_FS |
| |
| /* |
| * Display some core information through /proc/cpuinfo. |
| */ |
| |
| static int |
| c_show(struct seq_file *f, void *slot) |
| { |
| char buf[NR_CPUS * 5]; |
| |
| cpulist_scnprintf(buf, sizeof(buf), cpu_online_mask); |
| /* high-level stuff */ |
| seq_printf(f, "CPU count\t: %u\n" |
| "CPU list\t: %s\n" |
| "vendor_id\t: Tensilica\n" |
| "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n" |
| "core ID\t\t: " XCHAL_CORE_ID "\n" |
| "build ID\t: 0x%x\n" |
| "byte order\t: %s\n" |
| "cpu MHz\t\t: %lu.%02lu\n" |
| "bogomips\t: %lu.%02lu\n", |
| num_online_cpus(), |
| buf, |
| XCHAL_BUILD_UNIQUE_ID, |
| XCHAL_HAVE_BE ? "big" : "little", |
| ccount_freq/1000000, |
| (ccount_freq/10000) % 100, |
| loops_per_jiffy/(500000/HZ), |
| (loops_per_jiffy/(5000/HZ)) % 100); |
| |
| seq_printf(f,"flags\t\t: " |
| #if XCHAL_HAVE_NMI |
| "nmi " |
| #endif |
| #if XCHAL_HAVE_DEBUG |
| "debug " |
| # if XCHAL_HAVE_OCD |
| "ocd " |
| # endif |
| #endif |
| #if XCHAL_HAVE_DENSITY |
| "density " |
| #endif |
| #if XCHAL_HAVE_BOOLEANS |
| "boolean " |
| #endif |
| #if XCHAL_HAVE_LOOPS |
| "loop " |
| #endif |
| #if XCHAL_HAVE_NSA |
| "nsa " |
| #endif |
| #if XCHAL_HAVE_MINMAX |
| "minmax " |
| #endif |
| #if XCHAL_HAVE_SEXT |
| "sext " |
| #endif |
| #if XCHAL_HAVE_CLAMPS |
| "clamps " |
| #endif |
| #if XCHAL_HAVE_MAC16 |
| "mac16 " |
| #endif |
| #if XCHAL_HAVE_MUL16 |
| "mul16 " |
| #endif |
| #if XCHAL_HAVE_MUL32 |
| "mul32 " |
| #endif |
| #if XCHAL_HAVE_MUL32_HIGH |
| "mul32h " |
| #endif |
| #if XCHAL_HAVE_FP |
| "fpu " |
| #endif |
| #if XCHAL_HAVE_S32C1I |
| "s32c1i " |
| #endif |
| "\n"); |
| |
| /* Registers. */ |
| seq_printf(f,"physical aregs\t: %d\n" |
| "misc regs\t: %d\n" |
| "ibreak\t\t: %d\n" |
| "dbreak\t\t: %d\n", |
| XCHAL_NUM_AREGS, |
| XCHAL_NUM_MISC_REGS, |
| XCHAL_NUM_IBREAK, |
| XCHAL_NUM_DBREAK); |
| |
| |
| /* Interrupt. */ |
| seq_printf(f,"num ints\t: %d\n" |
| "ext ints\t: %d\n" |
| "int levels\t: %d\n" |
| "timers\t\t: %d\n" |
| "debug level\t: %d\n", |
| XCHAL_NUM_INTERRUPTS, |
| XCHAL_NUM_EXTINTERRUPTS, |
| XCHAL_NUM_INTLEVELS, |
| XCHAL_NUM_TIMERS, |
| XCHAL_DEBUGLEVEL); |
| |
| /* Cache */ |
| seq_printf(f,"icache line size: %d\n" |
| "icache ways\t: %d\n" |
| "icache size\t: %d\n" |
| "icache flags\t: " |
| #if XCHAL_ICACHE_LINE_LOCKABLE |
| "lock " |
| #endif |
| "\n" |
| "dcache line size: %d\n" |
| "dcache ways\t: %d\n" |
| "dcache size\t: %d\n" |
| "dcache flags\t: " |
| #if XCHAL_DCACHE_IS_WRITEBACK |
| "writeback " |
| #endif |
| #if XCHAL_DCACHE_LINE_LOCKABLE |
| "lock " |
| #endif |
| "\n", |
| XCHAL_ICACHE_LINESIZE, |
| XCHAL_ICACHE_WAYS, |
| XCHAL_ICACHE_SIZE, |
| XCHAL_DCACHE_LINESIZE, |
| XCHAL_DCACHE_WAYS, |
| XCHAL_DCACHE_SIZE); |
| |
| return 0; |
| } |
| |
| /* |
| * We show only CPU #0 info. |
| */ |
| static void * |
| c_start(struct seq_file *f, loff_t *pos) |
| { |
| return (*pos == 0) ? (void *)1 : NULL; |
| } |
| |
| static void * |
| c_next(struct seq_file *f, void *v, loff_t *pos) |
| { |
| return NULL; |
| } |
| |
| static void |
| c_stop(struct seq_file *f, void *v) |
| { |
| } |
| |
| const struct seq_operations cpuinfo_op = |
| { |
| .start = c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = c_show, |
| }; |
| |
| #endif /* CONFIG_PROC_FS */ |