blob: 617a9e28424560d28e7594e2c8213985aaef3de2 [file] [log] [blame]
/*
* Copyright (C) 2013 Advanced Micro Devices, Inc.
*
* Author: Jacob Shin <jacob.shin@amd.com>
* Fixes: Borislav Petkov <bp@suse.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/earlycpio.h>
#include <linux/initrd.h>
#include <asm/cpu.h>
#include <asm/setup.h>
#include <asm/microcode_amd.h>
/*
* This points to the current valid container of microcode patches which we will
* save from the initrd before jettisoning its contents.
*/
static u8 *container;
static size_t container_size;
static u32 ucode_new_rev;
u8 amd_ucode_patch[PATCH_MAX_SIZE];
static u16 this_equiv_id;
struct cpio_data ucode_cpio;
/*
* Microcode patch container file is prepended to the initrd in cpio format.
* See Documentation/x86/early-microcode.txt
*/
static __initdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin";
static struct cpio_data __init find_ucode_in_initrd(void)
{
long offset = 0;
char *path;
void *start;
size_t size;
#ifdef CONFIG_X86_32
struct boot_params *p;
/*
* On 32-bit, early load occurs before paging is turned on so we need
* to use physical addresses.
*/
p = (struct boot_params *)__pa_nodebug(&boot_params);
path = (char *)__pa_nodebug(ucode_path);
start = (void *)p->hdr.ramdisk_image;
size = p->hdr.ramdisk_size;
#else
path = ucode_path;
start = (void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET);
size = boot_params.hdr.ramdisk_size;
#endif
return find_cpio_data(path, start, size, &offset);
}
static size_t compute_container_size(u8 *data, u32 total_size)
{
size_t size = 0;
u32 *header = (u32 *)data;
if (header[0] != UCODE_MAGIC ||
header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
header[2] == 0) /* size */
return size;
size = header[2] + CONTAINER_HDR_SZ;
total_size -= size;
data += size;
while (total_size) {
u16 patch_size;
header = (u32 *)data;
if (header[0] != UCODE_UCODE_TYPE)
break;
/*
* Sanity-check patch size.
*/
patch_size = header[1];
if (patch_size > PATCH_MAX_SIZE)
break;
size += patch_size + SECTION_HDR_SIZE;
data += patch_size + SECTION_HDR_SIZE;
total_size -= patch_size + SECTION_HDR_SIZE;
}
return size;
}
/*
* Early load occurs before we can vmalloc(). So we look for the microcode
* patch container file in initrd, traverse equivalent cpu table, look for a
* matching microcode patch, and update, all in initrd memory in place.
* When vmalloc() is available for use later -- on 64-bit during first AP load,
* and on 32-bit during save_microcode_in_initrd_amd() -- we can call
* load_microcode_amd() to save equivalent cpu table and microcode patches in
* kernel heap memory.
*/
static void apply_ucode_in_initrd(void *ucode, size_t size)
{
struct equiv_cpu_entry *eq;
size_t *cont_sz;
u32 *header;
u8 *data, **cont;
u16 eq_id = 0;
int offset, left;
u32 rev, eax, ebx, ecx, edx;
u32 *new_rev;
#ifdef CONFIG_X86_32
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
cont_sz = (size_t *)__pa_nodebug(&container_size);
cont = (u8 **)__pa_nodebug(&container);
#else
new_rev = &ucode_new_rev;
cont_sz = &container_size;
cont = &container;
#endif
data = ucode;
left = size;
header = (u32 *)data;
/* find equiv cpu table */
if (header[0] != UCODE_MAGIC ||
header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */
header[2] == 0) /* size */
return;
eax = 0x00000001;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
while (left > 0) {
eq = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ);
*cont = data;
/* Advance past the container header */
offset = header[2] + CONTAINER_HDR_SZ;
data += offset;
left -= offset;
eq_id = find_equiv_id(eq, eax);
if (eq_id) {
this_equiv_id = eq_id;
*cont_sz = compute_container_size(*cont, left + offset);
/*
* truncate how much we need to iterate over in the
* ucode update loop below
*/
left = *cont_sz - offset;
break;
}
/*
* support multiple container files appended together. if this
* one does not have a matching equivalent cpu entry, we fast
* forward to the next container file.
*/
while (left > 0) {
header = (u32 *)data;
if (header[0] == UCODE_MAGIC &&
header[1] == UCODE_EQUIV_CPU_TABLE_TYPE)
break;
offset = header[1] + SECTION_HDR_SIZE;
data += offset;
left -= offset;
}
/* mark where the next microcode container file starts */
offset = data - (u8 *)ucode;
ucode = data;
}
if (!eq_id) {
*cont = NULL;
*cont_sz = 0;
return;
}
/* find ucode and update if needed */
native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax);
while (left > 0) {
struct microcode_amd *mc;
header = (u32 *)data;
if (header[0] != UCODE_UCODE_TYPE || /* type */
header[1] == 0) /* size */
break;
mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE);
if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id) {
if (!__apply_microcode_amd(mc)) {
rev = mc->hdr.patch_id;
*new_rev = rev;
/* save ucode patch */
memcpy(amd_ucode_patch, mc,
min_t(u32, header[1], PATCH_MAX_SIZE));
}
}
offset = header[1] + SECTION_HDR_SIZE;
data += offset;
left -= offset;
}
}
void __init load_ucode_amd_bsp(void)
{
struct cpio_data cp;
void **data;
size_t *size;
#ifdef CONFIG_X86_32
data = (void **)__pa_nodebug(&ucode_cpio.data);
size = (size_t *)__pa_nodebug(&ucode_cpio.size);
#else
data = &ucode_cpio.data;
size = &ucode_cpio.size;
#endif
cp = find_ucode_in_initrd();
if (!cp.data)
return;
*data = cp.data;
*size = cp.size;
apply_ucode_in_initrd(cp.data, cp.size);
}
#ifdef CONFIG_X86_32
/*
* On 32-bit, since AP's early load occurs before paging is turned on, we
* cannot traverse cpu_equiv_table and pcache in kernel heap memory. So during
* cold boot, AP will apply_ucode_in_initrd() just like the BSP. During
* save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch,
* which is used upon resume from suspend.
*/
void load_ucode_amd_ap(void)
{
struct microcode_amd *mc;
size_t *usize;
void **ucode;
mc = (struct microcode_amd *)__pa(amd_ucode_patch);
if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
__apply_microcode_amd(mc);
return;
}
ucode = (void *)__pa_nodebug(&container);
usize = (size_t *)__pa_nodebug(&container_size);
if (!*ucode || !*usize)
return;
apply_ucode_in_initrd(*ucode, *usize);
}
static void __init collect_cpu_sig_on_bsp(void *arg)
{
unsigned int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
uci->cpu_sig.sig = cpuid_eax(0x00000001);
}
static void __init get_bsp_sig(void)
{
unsigned int bsp = boot_cpu_data.cpu_index;
struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
if (!uci->cpu_sig.sig)
smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1);
}
#else
void load_ucode_amd_ap(void)
{
unsigned int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
struct equiv_cpu_entry *eq;
struct microcode_amd *mc;
u32 rev, eax;
u16 eq_id;
/* Exit if called on the BSP. */
if (!cpu)
return;
if (!container)
return;
rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax);
uci->cpu_sig.rev = rev;
uci->cpu_sig.sig = eax;
eax = cpuid_eax(0x00000001);
eq = (struct equiv_cpu_entry *)(container + CONTAINER_HDR_SZ);
eq_id = find_equiv_id(eq, eax);
if (!eq_id)
return;
if (eq_id == this_equiv_id) {
mc = (struct microcode_amd *)amd_ucode_patch;
if (mc && rev < mc->hdr.patch_id) {
if (!__apply_microcode_amd(mc))
ucode_new_rev = mc->hdr.patch_id;
}
} else {
if (!ucode_cpio.data)
return;
/*
* AP has a different equivalence ID than BSP, looks like
* mixed-steppings silicon so go through the ucode blob anew.
*/
apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size);
}
}
#endif
int __init save_microcode_in_initrd_amd(void)
{
unsigned long cont;
enum ucode_state ret;
u32 eax;
if (!container)
return -EINVAL;
#ifdef CONFIG_X86_32
get_bsp_sig();
cont = (unsigned long)container;
#else
/*
* We need the physical address of the container for both bitness since
* boot_params.hdr.ramdisk_image is a physical address.
*/
cont = __pa(container);
#endif
/*
* Take into account the fact that the ramdisk might get relocated and
* therefore we need to recompute the container's position in virtual
* memory space.
*/
if (relocated_ramdisk)
container = (u8 *)(__va(relocated_ramdisk) +
(cont - boot_params.hdr.ramdisk_image));
if (ucode_new_rev)
pr_info("microcode: updated early to new patch_level=0x%08x\n",
ucode_new_rev);
eax = cpuid_eax(0x00000001);
eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
ret = load_microcode_amd(eax, container, container_size);
if (ret != UCODE_OK)
return -EINVAL;
/*
* This will be freed any msec now, stash patches for the current
* family and switch to patch cache for cpu hotplug, etc later.
*/
container = NULL;
container_size = 0;
return 0;
}