blob: 73722c06750182cd003bb67e264d574616415412 [file] [log] [blame]
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "MPL CEC4";
compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_led_health: pmx-led-health {
marvell,pins = "mpp7";
marvell,function = "gpo";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp34";
marvell,function = "sata1";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp35";
marvell,function = "sata0";
};
pmx_led_user1o: pmx-led-user1o {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_user1g: pmx-led-user1g {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_user0o: pmx-led-user0o {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_user0g: pmx-led-user0g {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_misc: pmx-led-misc {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
};
};
serial@12000 {
status = "ok";
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
};
rtc@10300 {
status = "disabled";
};
sata@80000 {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
nr-ports = <2>;
status = "okay";
};
mvsdio@90000 {
pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
pinctrl-names = "default";
status = "okay";
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
/* No WP GPIO */
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_health
&pmx_led_user1o
&pmx_led_user1g &pmx_led_user0o
&pmx_led_user0g &pmx_led_misc
>;
pinctrl-names = "default";
health {
label = "status:green:health";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
user1o {
label = "user1:orange";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user1g {
label = "user1:green";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0o {
label = "user0:orange";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
user0g {
label = "user0:green";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
misc {
label = "status:orange:misc";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "uboot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "fdt";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
};
partition@600000 {
label = "rootfs";
reg = <0x600000 0x1fa00000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@1 {
reg = <1>;
};
ethphy1: ethernet-phy@2 {
reg = <2>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};