blob: 5c27229eec8ca14f610e2d5401593e7d80e13ea3 [file] [log] [blame]
Pro Audio Spectrum 16 for 2.3.99 and later
by Thomas Molina (
last modified 3 Mar 2001
Acknowledgement to Axel Boldt ( for stuff taken
from, Riccardo Facchetti for stuff from README.OSS,
and others whose names I could not find.
This documentation is relevant for the PAS16 driver (pas2_card.c and
friends) under kernel version 2.3.99 and later. If you are
unfamiliar with configuring sound under Linux, please read the
Sound-HOWTO, Documentation/sound/oss/Introduction and other
relevant docs first.
The following information is relevant information from README.OSS
and legacy docs for the Pro Audio Spectrum 16 (PAS16):
The pas2_card.c driver supports the following cards --
Pro Audio Spectrum 16 (PAS16) and compatibles:
Pro Audio Spectrum 16
Pro Audio Studio 16
Logitech Sound Man 16
NOTE! The original Pro Audio Spectrum as well as the PAS+ are not
and will not be supported by the driver.
The sound driver configuration dialog
Sound configuration starts by making some yes/no questions. Be careful
when answering to these questions since answering y to a question may
prevent some later ones from being asked. For example don't answer y to
the question about (PAS16) if you don't really have a PAS16. Sound
configuration may also be made modular by answering m to configuration
options presented.
Note also that all questions may not be asked. The configuration program
may disable some questions depending on the earlier choices. It may also
select some options automatically as well.
"ProAudioSpectrum 16 support",
- Answer 'y'_ONLY_ if you have a Pro Audio Spectrum _16_,
Pro Audio Studio 16 or Logitech SoundMan 16 (be sure that
you read the above list correctly). Don't answer 'y' if you
have some other card made by Media Vision or Logitech since they
are not PAS16 compatible.
NOTE! Since 3.5-beta10 you need to enable SB support (next question)
if you want to use the SB emulation of PAS16. It's also possible to
the emulation if you want to use a true SB card together with PAS16
(there is another question about this that is asked later).
"Generic OPL2/OPL3 FM synthesizer support",
- Answer 'y' if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
The PAS16 has an OPL3-compatible FM chip.
With PAS16 you can use two audio device files at the same time. /dev/dsp (and
/dev/audio) is connected to the 8/16 bit native codec and the /dev/dsp1 (and
/dev/audio1) is connected to the SB emulation (8 bit mono only).
The new stuff for 2.3.99 and later
The following configuration options are relevant to configuring the PAS16:
Sound card support
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from . General information
about the modular sound system is contained in the files
Documentation/sound/oss/Introduction. The file
Documentation/sound/oss/README.OSS contains some slightly outdated but
still useful information as well.
OSS sound modules
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or M
here (the module will be called sound.o) if you haven't found a
driver for your sound card above, then pick your driver from the
list below.
Persistent DMA buffers
Linux can often have problems allocating DMA buffers for ISA sound
cards on machines with more than 16MB of RAM. This is because ISA
DMA buffers must exist below the 16MB boundary and it is quite
possible that a large enough free block in this region cannot be
found after the machine has been running for a while. If you say Y
here the DMA buffers (64Kb) will be allocated at boot time and kept
until the shutdown. This option is only useful if you said Y to
"OSS sound modules", above. If you said M to "OSS sound modules"
then you can get the persistent DMA buffer functionality by passing
the command-line argument "dmabuf=1" to the sound.o module.
Say y here for PAS16.
ProAudioSpectrum 16 support
Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
16 or Logitech SoundMan 16 sound card. Don't answer Y if you have
some other card made by Media Vision or Logitech since they are not
PAS16 compatible. It is not necessary to enable the separate
Sound Blaster support; it is included in the PAS driver.
If you compile the driver into the kernel, you have to add
to the kernel command line.
FM Synthesizer (YM3812/OPL-3) support
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
Answering Y is usually a safe and recommended choice, however some
cards may have software (TSR) FM emulation. Enabling FM support with
these cards may cause trouble (I don't currently know of any such
cards, however).
Please read the file Documentation/sound/oss/OPL3 if your card has an
OPL3 chip.
If you compile the driver into the kernel, you have to add
"opl3=<io>" to the kernel command line.
If you compile your drivers into the kernel, you MUST configure
OPL3 support as a module for PAS16 support to work properly.
You can then get OPL3 functionality by issuing the command:
insmod opl3
In addition, you must either add the following line to
options opl3 io=0x388
or else add the following line to /etc/lilo.conf:
To use the PAS16 in my computer I have enabled the following sound
configuration options:
I have also included the following append line in /etc/lilo.conf:
append="pas2=0x388,10,3,-1,0x220,5,1,-1 sb=0x220,5,1,-1 opl3=0x388"
The io address of 0x388 is default configuration on the PAS16. The
irq of 10 and dma of 3 may not match your installation. The above
configuration enables PAS16, 8-bit Soundblaster and OPL3
functionality. If Soundblaster functionality is not desired, the
following line would be appropriate:
append="pas2=0x388,10,3,-1,0,-1,-1,-1 opl3=0x388"
If sound is built totally modular, the above options may be
specified in /etc/modprobe.d/*.conf for pas2, sb and opl3