| /* |
| * linux/drivers/ide/pci/atiixp.c Version 0.03 Aug 3 2007 |
| * |
| * Copyright (C) 2003 ATI Inc. <hyu@ati.com> |
| * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| |
| #include <asm/io.h> |
| |
| #define ATIIXP_IDE_PIO_TIMING 0x40 |
| #define ATIIXP_IDE_MDMA_TIMING 0x44 |
| #define ATIIXP_IDE_PIO_CONTROL 0x48 |
| #define ATIIXP_IDE_PIO_MODE 0x4a |
| #define ATIIXP_IDE_UDMA_CONTROL 0x54 |
| #define ATIIXP_IDE_UDMA_MODE 0x56 |
| |
| typedef struct { |
| u8 command_width; |
| u8 recover_width; |
| } atiixp_ide_timing; |
| |
| static atiixp_ide_timing pio_timing[] = { |
| { 0x05, 0x0d }, |
| { 0x04, 0x07 }, |
| { 0x03, 0x04 }, |
| { 0x02, 0x02 }, |
| { 0x02, 0x00 }, |
| }; |
| |
| static atiixp_ide_timing mdma_timing[] = { |
| { 0x07, 0x07 }, |
| { 0x02, 0x01 }, |
| { 0x02, 0x00 }, |
| }; |
| |
| static int save_mdma_mode[4]; |
| |
| static DEFINE_SPINLOCK(atiixp_lock); |
| |
| static void atiixp_dma_host_on(ide_drive_t *drive) |
| { |
| struct pci_dev *dev = drive->hwif->pci_dev; |
| unsigned long flags; |
| u16 tmp16; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); |
| if (save_mdma_mode[drive->dn]) |
| tmp16 &= ~(1 << drive->dn); |
| else |
| tmp16 |= (1 << drive->dn); |
| pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| |
| ide_dma_host_on(drive); |
| } |
| |
| static void atiixp_dma_host_off(ide_drive_t *drive) |
| { |
| struct pci_dev *dev = drive->hwif->pci_dev; |
| unsigned long flags; |
| u16 tmp16; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); |
| tmp16 &= ~(1 << drive->dn); |
| pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, tmp16); |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| |
| ide_dma_host_off(drive); |
| } |
| |
| /** |
| * atiixp_set_pio_mode - set host controller for PIO mode |
| * @drive: drive |
| * @pio: PIO mode number |
| * |
| * Set the interface PIO mode. |
| */ |
| |
| static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) |
| { |
| struct pci_dev *dev = drive->hwif->pci_dev; |
| unsigned long flags; |
| int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; |
| u32 pio_timing_data; |
| u16 pio_mode_data; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); |
| pio_mode_data &= ~(0x07 << (drive->dn * 4)); |
| pio_mode_data |= (pio << (drive->dn * 4)); |
| pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data); |
| |
| pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); |
| pio_timing_data &= ~(0xff << timing_shift); |
| pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) | |
| (pio_timing[pio].command_width << (timing_shift + 4)); |
| pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| } |
| |
| /** |
| * atiixp_set_dma_mode - set host controller for DMA mode |
| * @drive: drive |
| * @speed: DMA mode |
| * |
| * Set a ATIIXP host controller to the desired DMA mode. This involves |
| * programming the right timing data into the PCI configuration space. |
| */ |
| |
| static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) |
| { |
| struct pci_dev *dev = drive->hwif->pci_dev; |
| unsigned long flags; |
| int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8; |
| u32 tmp32; |
| u16 tmp16; |
| |
| if (speed < XFER_MW_DMA_0) |
| return; |
| |
| spin_lock_irqsave(&atiixp_lock, flags); |
| |
| save_mdma_mode[drive->dn] = 0; |
| if (speed >= XFER_UDMA_0) { |
| pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16); |
| tmp16 &= ~(0x07 << (drive->dn * 4)); |
| tmp16 |= ((speed & 0x07) << (drive->dn * 4)); |
| pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16); |
| } else { |
| if ((speed >= XFER_MW_DMA_0) && (speed <= XFER_MW_DMA_2)) { |
| save_mdma_mode[drive->dn] = speed; |
| pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32); |
| tmp32 &= ~(0xff << timing_shift); |
| tmp32 |= (mdma_timing[speed & 0x03].recover_width << timing_shift) | |
| (mdma_timing[speed & 0x03].command_width << (timing_shift + 4)); |
| pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32); |
| } |
| } |
| |
| spin_unlock_irqrestore(&atiixp_lock, flags); |
| } |
| |
| /** |
| * init_hwif_atiixp - fill in the hwif for the ATIIXP |
| * @hwif: IDE interface |
| * |
| * Set up the ide_hwif_t for the ATIIXP interface according to the |
| * capabilities of the hardware. |
| */ |
| |
| static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) |
| { |
| u8 udma_mode = 0; |
| u8 ch = hwif->channel; |
| struct pci_dev *pdev = hwif->pci_dev; |
| |
| if (!hwif->irq) |
| hwif->irq = ch ? 15 : 14; |
| |
| hwif->set_pio_mode = &atiixp_set_pio_mode; |
| hwif->set_dma_mode = &atiixp_set_dma_mode; |
| hwif->drives[0].autotune = 1; |
| hwif->drives[1].autotune = 1; |
| |
| if (!hwif->dma_base) |
| return; |
| |
| hwif->ultra_mask = 0x3f; |
| hwif->mwdma_mask = 0x07; |
| |
| pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); |
| |
| if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) |
| hwif->cbl = ATA_CBL_PATA80; |
| else |
| hwif->cbl = ATA_CBL_PATA40; |
| |
| hwif->dma_host_on = &atiixp_dma_host_on; |
| hwif->dma_host_off = &atiixp_dma_host_off; |
| } |
| |
| |
| static ide_pci_device_t atiixp_pci_info[] __devinitdata = { |
| { /* 0 */ |
| .name = "ATIIXP", |
| .init_hwif = init_hwif_atiixp, |
| .autodma = AUTODMA, |
| .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, |
| .host_flags = IDE_HFLAG_BOOTABLE, |
| .pio_mask = ATA_PIO4, |
| },{ /* 1 */ |
| .name = "SB600_PATA", |
| .init_hwif = init_hwif_atiixp, |
| .autodma = AUTODMA, |
| .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, |
| .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_BOOTABLE, |
| .pio_mask = ATA_PIO4, |
| }, |
| }; |
| |
| /** |
| * atiixp_init_one - called when a ATIIXP is found |
| * @dev: the atiixp device |
| * @id: the matching pci id |
| * |
| * Called when the PCI registration layer (or the IDE initialization) |
| * finds a device matching our IDE device tables. |
| */ |
| |
| static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| return ide_setup_pci_device(dev, &atiixp_pci_info[id->driver_data]); |
| } |
| |
| static const struct pci_device_id atiixp_pci_tbl[] = { |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 }, |
| { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); |
| |
| static struct pci_driver driver = { |
| .name = "ATIIXP_IDE", |
| .id_table = atiixp_pci_tbl, |
| .probe = atiixp_init_one, |
| }; |
| |
| static int __init atiixp_ide_init(void) |
| { |
| return ide_pci_register_driver(&driver); |
| } |
| |
| module_init(atiixp_ide_init); |
| |
| MODULE_AUTHOR("HUI YU"); |
| MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE"); |
| MODULE_LICENSE("GPL"); |