| /* |
| * linux/arch/arm/mach-omap2/devices.c |
| * |
| * OMAP2 platform device setup/initialization |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/io.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/tc.h> |
| #include <mach/board.h> |
| #include <mach/mux.h> |
| #include <mach/gpio.h> |
| |
| #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) |
| |
| #define OMAP2_I2C_BASE2 0x48072000 |
| #define OMAP2_I2C_INT2 57 |
| |
| static struct resource i2c_resources2[] = { |
| { |
| .start = OMAP2_I2C_BASE2, |
| .end = OMAP2_I2C_BASE2 + 0x3f, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = OMAP2_I2C_INT2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device omap_i2c_device2 = { |
| .name = "i2c_omap", |
| .id = 2, |
| .num_resources = ARRAY_SIZE(i2c_resources2), |
| .resource = i2c_resources2, |
| }; |
| |
| /* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */ |
| static void omap_init_i2c(void) |
| { |
| /* REVISIT: Second I2C not in use on H4? */ |
| if (machine_is_omap_h4()) |
| return; |
| |
| if (!cpu_is_omap2430()) { |
| omap_cfg_reg(J15_24XX_I2C2_SCL); |
| omap_cfg_reg(H19_24XX_I2C2_SDA); |
| } |
| (void) platform_device_register(&omap_i2c_device2); |
| } |
| |
| #else |
| |
| static void omap_init_i2c(void) {} |
| |
| #endif |
| |
| #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) |
| #define OMAP2_MBOX_BASE IO_ADDRESS(OMAP24XX_MAILBOX_BASE) |
| |
| static struct resource mbox_resources[] = { |
| { |
| .start = OMAP2_MBOX_BASE, |
| .end = OMAP2_MBOX_BASE + 0x11f, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = INT_24XX_MAIL_U0_MPU, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = INT_24XX_MAIL_U3_MPU, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device mbox_device = { |
| .name = "mailbox", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(mbox_resources), |
| .resource = mbox_resources, |
| }; |
| |
| static inline void omap_init_mbox(void) |
| { |
| platform_device_register(&mbox_device); |
| } |
| #else |
| static inline void omap_init_mbox(void) { } |
| #endif |
| |
| #if defined(CONFIG_OMAP_STI) |
| |
| #define OMAP2_STI_BASE IO_ADDRESS(0x48068000) |
| #define OMAP2_STI_CHANNEL_BASE 0x54000000 |
| #define OMAP2_STI_IRQ 4 |
| |
| static struct resource sti_resources[] = { |
| { |
| .start = OMAP2_STI_BASE, |
| .end = OMAP2_STI_BASE + 0x7ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = OMAP2_STI_CHANNEL_BASE, |
| .end = OMAP2_STI_CHANNEL_BASE + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = OMAP2_STI_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device sti_device = { |
| .name = "sti", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(sti_resources), |
| .resource = sti_resources, |
| }; |
| |
| static inline void omap_init_sti(void) |
| { |
| platform_device_register(&sti_device); |
| } |
| #else |
| static inline void omap_init_sti(void) {} |
| #endif |
| |
| #if defined(CONFIG_SPI_OMAP24XX) |
| |
| #include <mach/mcspi.h> |
| |
| #define OMAP2_MCSPI1_BASE 0x48098000 |
| #define OMAP2_MCSPI2_BASE 0x4809a000 |
| |
| static struct omap2_mcspi_platform_config omap2_mcspi1_config = { |
| .num_cs = 4, |
| }; |
| |
| static struct resource omap2_mcspi1_resources[] = { |
| { |
| .start = OMAP2_MCSPI1_BASE, |
| .end = OMAP2_MCSPI1_BASE + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| struct platform_device omap2_mcspi1 = { |
| .name = "omap2_mcspi", |
| .id = 1, |
| .num_resources = ARRAY_SIZE(omap2_mcspi1_resources), |
| .resource = omap2_mcspi1_resources, |
| .dev = { |
| .platform_data = &omap2_mcspi1_config, |
| }, |
| }; |
| |
| static struct omap2_mcspi_platform_config omap2_mcspi2_config = { |
| .num_cs = 2, |
| }; |
| |
| static struct resource omap2_mcspi2_resources[] = { |
| { |
| .start = OMAP2_MCSPI2_BASE, |
| .end = OMAP2_MCSPI2_BASE + 0xff, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| struct platform_device omap2_mcspi2 = { |
| .name = "omap2_mcspi", |
| .id = 2, |
| .num_resources = ARRAY_SIZE(omap2_mcspi2_resources), |
| .resource = omap2_mcspi2_resources, |
| .dev = { |
| .platform_data = &omap2_mcspi2_config, |
| }, |
| }; |
| |
| static void omap_init_mcspi(void) |
| { |
| platform_device_register(&omap2_mcspi1); |
| platform_device_register(&omap2_mcspi2); |
| } |
| |
| #else |
| static inline void omap_init_mcspi(void) {} |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int __init omap2_init_devices(void) |
| { |
| /* please keep these calls, and their implementations above, |
| * in alphabetical order so they're easier to sort through. |
| */ |
| omap_init_i2c(); |
| omap_init_mbox(); |
| omap_init_mcspi(); |
| omap_init_sti(); |
| |
| return 0; |
| } |
| arch_initcall(omap2_init_devices); |