| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "vf610-pinfunc.h" |
| #include <dt-bindings/clock/vf610-clock.h> |
| |
| / { |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| serial5 = &uart5; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a5"; |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sxosc { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| fxosc { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| aips0: aips-bus@40000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| reg = <0x40000000 0x70000>; |
| ranges; |
| |
| intc: interrupt-controller@40002000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| reg = <0x40003000 0x1000>, |
| <0x40002100 0x100>; |
| }; |
| |
| L2: l2-cache@40006000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x40006000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| arm,data-latency = <1 1 1>; |
| arm,tag-latency = <2 2 2>; |
| }; |
| |
| uart0: serial@40027000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40027000 0x1000>; |
| interrupts = <0 61 0x00>; |
| clocks = <&clks VF610_CLK_UART0>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@40028000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40028000 0x1000>; |
| interrupts = <0 62 0x04>; |
| clocks = <&clks VF610_CLK_UART1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@40029000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x40029000 0x1000>; |
| interrupts = <0 63 0x04>; |
| clocks = <&clks VF610_CLK_UART2>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@4002a000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x4002a000 0x1000>; |
| interrupts = <0 64 0x04>; |
| clocks = <&clks VF610_CLK_UART3>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@40031000 { |
| compatible = "fsl,vf610-sai"; |
| reg = <0x40031000 0x1000>; |
| interrupts = <0 86 0x04>; |
| clocks = <&clks VF610_CLK_SAI2>; |
| clock-names = "sai"; |
| status = "disabled"; |
| }; |
| |
| pit: pit@40037000 { |
| compatible = "fsl,vf610-pit"; |
| reg = <0x40037000 0x1000>; |
| interrupts = <0 39 0x04>; |
| clocks = <&clks VF610_CLK_PIT>; |
| clock-names = "pit"; |
| }; |
| |
| wdog@4003e000 { |
| compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; |
| reg = <0x4003e000 0x1000>; |
| clocks = <&clks VF610_CLK_WDT>; |
| clock-names = "wdog"; |
| }; |
| |
| qspi0: quadspi@40044000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,vf610-qspi"; |
| reg = <0x40044000 0x1000>; |
| interrupts = <0 24 0x04>; |
| clocks = <&clks VF610_CLK_QSPI0_EN>, |
| <&clks VF610_CLK_QSPI0>; |
| clock-names = "qspi_en", "qspi"; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@40048000 { |
| compatible = "fsl,vf610-iomuxc"; |
| reg = <0x40048000 0x1000>; |
| #gpio-range-cells = <3>; |
| |
| /* functions and groups pins */ |
| |
| dcu0 { |
| pinctrl_dcu0_1: dcu0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTB8__GPIO_30 0x42 |
| VF610_PAD_PTE0__DCU0_HSYNC 0x42 |
| VF610_PAD_PTE1__DCU0_VSYNC 0x42 |
| VF610_PAD_PTE2__DCU0_PCLK 0x42 |
| VF610_PAD_PTE4__DCU0_DE 0x42 |
| VF610_PAD_PTE5__DCU0_R0 0x42 |
| VF610_PAD_PTE6__DCU0_R1 0x42 |
| VF610_PAD_PTE7__DCU0_R2 0x42 |
| VF610_PAD_PTE8__DCU0_R3 0x42 |
| VF610_PAD_PTE9__DCU0_R4 0x42 |
| VF610_PAD_PTE10__DCU0_R5 0x42 |
| VF610_PAD_PTE11__DCU0_R6 0x42 |
| VF610_PAD_PTE12__DCU0_R7 0x42 |
| VF610_PAD_PTE13__DCU0_G0 0x42 |
| VF610_PAD_PTE14__DCU0_G1 0x42 |
| VF610_PAD_PTE15__DCU0_G2 0x42 |
| VF610_PAD_PTE16__DCU0_G3 0x42 |
| VF610_PAD_PTE17__DCU0_G4 0x42 |
| VF610_PAD_PTE18__DCU0_G5 0x42 |
| VF610_PAD_PTE19__DCU0_G6 0x42 |
| VF610_PAD_PTE20__DCU0_G7 0x42 |
| VF610_PAD_PTE21__DCU0_B0 0x42 |
| VF610_PAD_PTE22__DCU0_B1 0x42 |
| VF610_PAD_PTE23__DCU0_B2 0x42 |
| VF610_PAD_PTE24__DCU0_B3 0x42 |
| VF610_PAD_PTE25__DCU0_B4 0x42 |
| VF610_PAD_PTE26__DCU0_B5 0x42 |
| VF610_PAD_PTE27__DCU0_B6 0x42 |
| VF610_PAD_PTE28__DCU0_B7 0x42 |
| >; |
| }; |
| }; |
| |
| dspi0 { |
| pinctrl_dspi0_1: dspi0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTB19__DSPI0_CS0 0x1182 |
| VF610_PAD_PTB20__DSPI0_SIN 0x1181 |
| VF610_PAD_PTB21__DSPI0_SOUT 0x1182 |
| VF610_PAD_PTB22__DSPI0_SCK 0x1182 |
| >; |
| }; |
| }; |
| |
| esdhc1 { |
| pinctrl_esdhc1_1: esdhc1grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTA24__ESDHC1_CLK 0x31ef |
| VF610_PAD_PTA25__ESDHC1_CMD 0x31ef |
| VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |
| VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef |
| VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef |
| VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef |
| VF610_PAD_PTA7__GPIO_134 0x219d |
| >; |
| }; |
| }; |
| |
| fec0 { |
| pinctrl_fec0_1: fec0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTA6__RMII_CLKIN 0x30d1 |
| VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3 |
| VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1 |
| VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1 |
| VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1 |
| VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1 |
| VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1 |
| VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2 |
| VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2 |
| VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2 |
| >; |
| }; |
| }; |
| |
| fec1 { |
| pinctrl_fec1_1: fec1grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 |
| VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 |
| VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 |
| VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 |
| VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 |
| VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 |
| VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 |
| VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 |
| VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 |
| >; |
| }; |
| }; |
| |
| i2c0 { |
| pinctrl_i2c0_1: i2c0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTB14__I2C0_SCL 0x30d3 |
| VF610_PAD_PTB15__I2C0_SDA 0x30d3 |
| >; |
| }; |
| }; |
| |
| pwm0 { |
| pinctrl_pwm0_1: pwm0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTB0__FTM0_CH0 0x1582 |
| VF610_PAD_PTB1__FTM0_CH1 0x1582 |
| VF610_PAD_PTB2__FTM0_CH2 0x1582 |
| VF610_PAD_PTB3__FTM0_CH3 0x1582 |
| VF610_PAD_PTB6__FTM0_CH6 0x1582 |
| VF610_PAD_PTB7__FTM0_CH7 0x1582 |
| >; |
| }; |
| }; |
| |
| qspi0 { |
| pinctrl_qspi0_1: qspi0grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b |
| VF610_PAD_PTD1__QSPI0_A_CS0 0x307f |
| VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073 |
| VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073 |
| VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073 |
| VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b |
| VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b |
| VF610_PAD_PTD8__QSPI0_B_CS0 0x307f |
| VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073 |
| VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073 |
| VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073 |
| VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b |
| >; |
| }; |
| }; |
| |
| sai2 { |
| pinctrl_sai2_1: sai2grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed |
| VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee |
| VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed |
| VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed |
| VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed |
| VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed |
| VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp_1 { |
| fsl,pins = < |
| VF610_PAD_PTB4__UART1_TX 0x21a2 |
| VF610_PAD_PTB5__UART1_RX 0x21a1 |
| >; |
| }; |
| }; |
| |
| usbvbus { |
| pinctrl_usbvbus_1: usbvbusgrp_1 { |
| fsl,pins = < |
| VF610_PAD_PTA24__USB1_VBUS_EN 0x219c |
| VF610_PAD_PTA16__USB0_VBUS_EN 0x219c |
| >; |
| }; |
| }; |
| |
| }; |
| |
| gpio1: gpio@40049000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x40049000 0x1000 0x400ff000 0x40>; |
| interrupts = <0 107 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 0 32>; |
| }; |
| |
| gpio2: gpio@4004a000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004a000 0x1000 0x400ff040 0x40>; |
| interrupts = <0 108 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 32 32>; |
| }; |
| |
| gpio3: gpio@4004b000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004b000 0x1000 0x400ff080 0x40>; |
| interrupts = <0 109 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 64 32>; |
| }; |
| |
| gpio4: gpio@4004c000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; |
| interrupts = <0 110 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 96 32>; |
| }; |
| |
| gpio5: gpio@4004d000 { |
| compatible = "fsl,vf610-gpio"; |
| reg = <0x4004d000 0x1000 0x400ff100 0x40>; |
| interrupts = <0 111 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&iomuxc 0 128 7>; |
| }; |
| |
| anatop@40050000 { |
| compatible = "fsl,vf610-anatop"; |
| reg = <0x40050000 0x1000>; |
| }; |
| |
| i2c0: i2c@40066000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,vf610-i2c"; |
| reg = <0x40066000 0x1000>; |
| interrupts =<0 71 0x04>; |
| clocks = <&clks VF610_CLK_I2C0>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| clks: ccm@4006b000 { |
| compatible = "fsl,vf610-ccm"; |
| reg = <0x4006b000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| aips1: aips-bus@40080000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x40080000 0x80000>; |
| ranges; |
| |
| uart4: serial@400a9000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x400a9000 0x1000>; |
| interrupts = <0 65 0x04>; |
| clocks = <&clks VF610_CLK_UART4>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@400aa000 { |
| compatible = "fsl,vf610-lpuart"; |
| reg = <0x400aa000 0x1000>; |
| interrupts = <0 66 0x04>; |
| clocks = <&clks VF610_CLK_UART5>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| fec0: ethernet@400d0000 { |
| compatible = "fsl,mvf600-fec"; |
| reg = <0x400d0000 0x1000>; |
| interrupts = <0 78 0x04>; |
| clocks = <&clks VF610_CLK_ENET>, |
| <&clks VF610_CLK_ENET>, |
| <&clks VF610_CLK_ENET>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| |
| fec1: ethernet@400d1000 { |
| compatible = "fsl,mvf600-fec"; |
| reg = <0x400d1000 0x1000>; |
| interrupts = <0 79 0x04>; |
| clocks = <&clks VF610_CLK_ENET>, |
| <&clks VF610_CLK_ENET>, |
| <&clks VF610_CLK_ENET>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
