include/asm-sh/hd64465/hd64465.h - maze/linux - Git at Google

 #ifndef _ASM_SH_HD64465_
 #define _ASM_SH_HD64465_ 1
 /*
  * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
  *
  * Hitachi HD64465 companion chip support
  *
  * by Greg Banks <gbanks@pocketpenguins.com>
  * (c) 2000 PocketPenguins Inc.
  *
  * Derived from <asm/hd64461.h> which bore the message:
  * Copyright (C) 2000 YAEGASHI Takeshi
  */
 #include <asm/io.h>
 #include <asm/irq.h>

 /*
  * Note that registers are defined here as virtual port numbers,
  * which have no meaning except to get translated by hd64465_isa_port2addr()
  * to an address in the range 0xb0000000-0xb3ffffff.  Note that
  * this translation happens to consist of adding the lower 16 bits
  * of the virtual port number to 0xb0000000.  Note also that the manual
  * shows addresses as absolute physical addresses starting at 0x10000000,
  * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
  * manual, and accessed using address 0xb0005000 - Greg.
  */

 /* System registers */
 #define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
 #define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
 #define     HD64465_SDID            0x8122  /* 64465 device ID */

 /* Power Management registers */
 #define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
 #define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
 #define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
 #define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
 #define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
 #define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
 #define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
 #define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
 #define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
 #define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
 #define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
 #define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
 #define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */

 /* Interrupt Controller registers */
 #define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
 #define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
 #define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */

 /* Timer registers */
 #define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
 #define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
 #define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
 #define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
 #define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
 #define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
 #define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
 #define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
 #define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
 #define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
 #define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
 #define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
 #define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
 #define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
 #define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
 #define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
 #define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
 #define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
 #define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
 #define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
 #define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
 #define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */

 /* Analog/Digital Converter registers */
 #define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
 #define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
 #define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
 #define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
 #define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
 #define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
 #define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
 #define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
 #define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
 #define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
 #define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
 #define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
 #define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
 #define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */


 /* General Purpose I/O ports registers */
 #define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
 #define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
 #define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
 #define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
 #define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
 #define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
 #define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
 #define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
 #define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
 #define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
 #define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
 #define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
 #define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
 #define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
 #define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
 #define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
 #define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
 #define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
 #define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
 #define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */

 /* PCMCIA bridge interface */
 #define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */
 #define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
 #define     HD64465_PCCISR_PIREQ    	 0x80
 #define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
 #define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
 #define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
 #define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
 #define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
 #define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
 #define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
 #define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
 #define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
 #define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */
 #define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
 #define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
 #define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
 #define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
 #define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
 #define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
 #define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
 #define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
 #define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */
 #define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
 #define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
 #define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
 #define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
 #define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
 #define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
 #define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
 #define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
 #define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */
 #define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
 #define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
 #define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
 #define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
 #define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
 #define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
 #define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
 #define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
 #define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
 #define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
 #define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
 #define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */
 #define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
 #define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
 #define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */
 #define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */
 #define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */
 #define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */
 #define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */
 #define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */


 /* PS/2 Keyboard and mouse controller -- *not* register compatible */
 #define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
 #define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
 #define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
 #define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
 #define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
 #define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
 #define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
 #define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
 #define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
 #define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
 #define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
 #define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
 #define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
 #define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */


 /*
  * Logical address at which the HD64465 is mapped.  Note that this
  * should always be in the P2 segment (uncached and untranslated).
  */
 #ifndef CONFIG_HD64465_IOBASE
 #define CONFIG_HD64465_IOBASE	0xb0000000
 #endif
 /*
  * The HD64465 multiplexes all its modules' interrupts onto
  * this single interrupt.
  */
 #ifndef CONFIG_HD64465_IRQ
 #define CONFIG_HD64465_IRQ	5
 #endif


 #define _HD64465_IO_MASK	0xf8000000
 #define is_hd64465_addr(addr) \
 	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))

 /*
  * A range of 16 virtual interrupts generated by
  * demuxing the HD64465 muxed interrupt.
  */
 #define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
 #define HD64465_IRQ_NUM 	16
 #define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
 #define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
 #define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
 #define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
 /* bit 4 is reserved */
 #define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
 #define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
 #define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
 #define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
 #define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
 #define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
 #define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
 #define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
 #define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
 #define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
 #define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)

 /* Constants for PCMCIA mappings */
 #define HD64465_PCC_WINDOW	0x01000000

 #define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
 #define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
 #define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
 #define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)

 #define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
 #define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
 #define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
 #define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)

 /*
  * Base of USB controller interface (as memory)
  */
 #define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
 #define HD64465_USB_LEN    	0x1000
 /*
  * Base of embedded SRAM, used for USB controller.
  */
 #define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
 #define HD64465_SRAM_LEN    	0x1000


 #endif /* _ASM_SH_HD64465_  */
	#ifndef _ASM_SH_HD64465_
	#define _ASM_SH_HD64465_ 1
	/*
	* $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
	*
	* Hitachi HD64465 companion chip support
	*
	* by Greg Banks <gbanks@pocketpenguins.com>
	* (c) 2000 PocketPenguins Inc.
	*
	* Derived from <asm/hd64461.h> which bore the message:
	* Copyright (C) 2000 YAEGASHI Takeshi
	*/
	#include <asm/io.h>
	#include <asm/irq.h>

	/*
	* Note that registers are defined here as virtual port numbers,
	* which have no meaning except to get translated by hd64465_isa_port2addr()
	* to an address in the range 0xb0000000-0xb3ffffff. Note that
	* this translation happens to consist of adding the lower 16 bits
	* of the virtual port number to 0xb0000000. Note also that the manual
	* shows addresses as absolute physical addresses starting at 0x10000000,
	* so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
	* manual, and accessed using address 0xb0005000 - Greg.
	*/

	/* System registers */
	#define HD64465_REG_SRR 0x1000c /* System Revision Register */
	#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */
	#define HD64465_SDID 0x8122 /* 64465 device ID */

	/* Power Management registers */
	#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */
	#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */
	#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */
	#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */
	#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */
	#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */
	#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */
	#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */
	#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */
	#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */
	#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */
	#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */
	#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */

	/* Interrupt Controller registers */
	#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */
	#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */
	#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */

	/* Timer registers */
	#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */
	#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */
	#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */
	#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */
	#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */
	#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */
	#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */
	#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */
	#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */
	#define HD64465_TCR_PST_1 0x06 /* 1:1 */
	#define HD64465_TCR_PST_4 0x04 /* 1:4 */
	#define HD64465_TCR_PST_8 0x02 /* 1:8 */
	#define HD64465_TCR_PST_16 0x00 /* 1:16 */
	#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */
	#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */
	#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */
	#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */
	#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */
	#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */
	#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */
	#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */
	#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */

	/* Analog/Digital Converter registers */
	#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */
	#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */
	#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */
	#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */
	#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */
	#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */
	#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */
	#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */
	#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */
	#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */
	#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */
	#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */
	#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */
	#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */


	/* General Purpose I/O ports registers */
	#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */
	#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */
	#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */
	#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */
	#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */
	#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */
	#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */
	#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */
	#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */
	#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */
	#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */
	#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */
	#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */
	#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */
	#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */
	#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */
	#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */
	#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */
	#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */
	#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */

	/* PCMCIA bridge interface */
	#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */
	#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */
	#define HD64465_PCCISR_PIREQ 0x80
	#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */
	#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */
	#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */
	#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */
	#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */
	#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */
	#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */
	#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */
	#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */
	#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */
	#define HD64465_PCCGCR_PDRV 0x80 /* output drive */
	#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */
	#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */
	#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */
	#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */
	#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */
	#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */
	#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */
	#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */
	#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */
	#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */
	#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */
	#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */
	#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */
	#define HD64465_PCCCSCR_PRC 0x04 /* ready change */
	#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */
	#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */
	#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */
	#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */
	#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */
	#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */
	#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */
	#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */
	#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */
	#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */
	#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */
	#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */
	#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */
	#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/
	#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */
	#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */
	#define HD64465_PCCSCR_SWP 0x01 /* write protect */
	#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */
	#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */
	#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */
	#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */
	#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */
	#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */


	/* PS/2 Keyboard and mouse controller -- not register compatible */
	#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */
	#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */
	#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */
	#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */
	#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */
	#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */
	#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */
	#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */
	#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */
	#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */
	#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */
	#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */
	#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */
	#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */


	/*
	* Logical address at which the HD64465 is mapped. Note that this
	* should always be in the P2 segment (uncached and untranslated).
	*/
	#ifndef CONFIG_HD64465_IOBASE
	#define CONFIG_HD64465_IOBASE 0xb0000000
	#endif
	/*
	* The HD64465 multiplexes all its modules' interrupts onto
	* this single interrupt.
	*/
	#ifndef CONFIG_HD64465_IRQ
	#define CONFIG_HD64465_IRQ 5
	#endif


	#define _HD64465_IO_MASK 0xf8000000
	#define is_hd64465_addr(addr) \
	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))

	/*
	* A range of 16 virtual interrupts generated by
	* demuxing the HD64465 muxed interrupt.
	*/
	#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE
	#define HD64465_IRQ_NUM 16
	#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0)
	#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1)
	#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2)
	#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3)
	/* bit 4 is reserved */
	#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5)
	#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6)
	#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7)
	#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8)
	#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9)
	#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10)
	#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11)
	#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12)
	#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13)
	#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14)
	#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15)

	/* Constants for PCMCIA mappings */
	#define HD64465_PCC_WINDOW 0x01000000

	#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */
	#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE)
	#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
	#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)

	#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */
	#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE)
	#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
	#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)

	/*
	* Base of USB controller interface (as memory)
	*/
	#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000)
	#define HD64465_USB_LEN 0x1000
	/*
	* Base of embedded SRAM, used for USB controller.
	*/
	#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000)
	#define HD64465_SRAM_LEN 0x1000



	#endif /* _ASM_SH_HD64465_ */