| /* |
| * |
| * i2c tv tuner chip device driver |
| * controls all those simple 4-control-bytes style tuners. |
| */ |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev.h> |
| #include <media/tuner.h> |
| #include <media/v4l2-common.h> |
| |
| static int offset = 0; |
| module_param(offset, int, 0664); |
| MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner"); |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| /* tv standard selection for Temic 4046 FM5 |
| this value takes the low bits of control byte 2 |
| from datasheet Rev.01, Feb.00 |
| standard BG I L L2 D |
| picture IF 38.9 38.9 38.9 33.95 38.9 |
| sound 1 33.4 32.9 32.4 40.45 32.4 |
| sound 2 33.16 |
| NICAM 33.05 32.348 33.05 33.05 |
| */ |
| #define TEMIC_SET_PAL_I 0x05 |
| #define TEMIC_SET_PAL_DK 0x09 |
| #define TEMIC_SET_PAL_L 0x0a // SECAM ? |
| #define TEMIC_SET_PAL_L2 0x0b // change IF ! |
| #define TEMIC_SET_PAL_BG 0x0c |
| |
| /* tv tuner system standard selection for Philips FQ1216ME |
| this value takes the low bits of control byte 2 |
| from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") |
| standard BG DK I L L` |
| picture carrier 38.90 38.90 38.90 38.90 33.95 |
| colour 34.47 34.47 34.47 34.47 38.38 |
| sound 1 33.40 32.40 32.90 32.40 40.45 |
| sound 2 33.16 - - - - |
| NICAM 33.05 33.05 32.35 33.05 39.80 |
| */ |
| #define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ |
| #define PHILIPS_SET_PAL_BGDK 0x09 |
| #define PHILIPS_SET_PAL_L2 0x0a |
| #define PHILIPS_SET_PAL_L 0x0b |
| |
| /* system switching for Philips FI1216MF MK2 |
| from datasheet "1996 Jul 09", |
| standard BG L L' |
| picture carrier 38.90 38.90 33.95 |
| colour 34.47 34.37 38.38 |
| sound 1 33.40 32.40 40.45 |
| sound 2 33.16 - - |
| NICAM 33.05 33.05 39.80 |
| */ |
| #define PHILIPS_MF_SET_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ |
| #define PHILIPS_MF_SET_PAL_L 0x03 // France |
| #define PHILIPS_MF_SET_PAL_L2 0x02 // L' |
| |
| /* Control byte */ |
| |
| #define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */ |
| #define TUNER_RATIO_SELECT_50 0x00 |
| #define TUNER_RATIO_SELECT_32 0x02 |
| #define TUNER_RATIO_SELECT_166 0x04 |
| #define TUNER_RATIO_SELECT_62 0x06 |
| |
| #define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */ |
| |
| /* Status byte */ |
| |
| #define TUNER_POR 0x80 |
| #define TUNER_FL 0x40 |
| #define TUNER_MODE 0x38 |
| #define TUNER_AFC 0x07 |
| #define TUNER_SIGNAL 0x07 |
| #define TUNER_STEREO 0x10 |
| |
| #define TUNER_PLL_LOCKED 0x40 |
| #define TUNER_STEREO_MK3 0x04 |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int tuner_getstatus(struct i2c_client *c) |
| { |
| unsigned char byte; |
| |
| if (1 != i2c_master_recv(c,&byte,1)) |
| return 0; |
| |
| return byte; |
| } |
| |
| static int tuner_signal(struct i2c_client *c) |
| { |
| return (tuner_getstatus(c) & TUNER_SIGNAL) << 13; |
| } |
| |
| static int tuner_stereo(struct i2c_client *c) |
| { |
| int stereo, status; |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| status = tuner_getstatus (c); |
| |
| switch (t->type) { |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FM1256_IH3: |
| case TUNER_LG_NTSC_TAPE: |
| stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); |
| break; |
| default: |
| stereo = status & TUNER_STEREO; |
| } |
| |
| return stereo; |
| } |
| |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| u8 config, cb, tuneraddr; |
| u16 div; |
| struct tunertype *tun; |
| u8 buffer[4]; |
| int rc, IFPCoff, i, j; |
| enum param_type desired_type; |
| struct tuner_params *params; |
| |
| tun = &tuners[t->type]; |
| |
| /* IFPCoff = Video Intermediate Frequency - Vif: |
| 940 =16*58.75 NTSC/J (Japan) |
| 732 =16*45.75 M/N STD |
| 704 =16*44 ATSC (at DVB code) |
| 632 =16*39.50 I U.K. |
| 622.4=16*38.90 B/G D/K I, L STD |
| 592 =16*37.00 D China |
| 590 =16.36.875 B Australia |
| 543.2=16*33.95 L' STD |
| 171.2=16*10.70 FM Radio (at set_radio_freq) |
| */ |
| |
| if (t->std == V4L2_STD_NTSC_M_JP) { |
| IFPCoff = 940; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if ((t->std & V4L2_STD_MN) && |
| !(t->std & ~V4L2_STD_MN)) { |
| IFPCoff = 732; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if (t->std == V4L2_STD_SECAM_LC) { |
| IFPCoff = 543; |
| desired_type = TUNER_PARAM_TYPE_SECAM; |
| } else { |
| IFPCoff = 623; |
| desired_type = TUNER_PARAM_TYPE_PAL; |
| } |
| |
| for (j = 0; j < tun->count-1; j++) { |
| if (desired_type != tun->params[j].type) |
| continue; |
| break; |
| } |
| /* use default tuner_params if desired_type not available */ |
| if (desired_type != tun->params[j].type) { |
| tuner_dbg("IFPCoff = %d: tuner_params undefined for tuner %d\n", |
| IFPCoff,t->type); |
| j = 0; |
| } |
| params = &tun->params[j]; |
| |
| for (i = 0; i < params->count; i++) { |
| if (freq > params->ranges[i].limit) |
| continue; |
| break; |
| } |
| if (i == params->count) { |
| tuner_dbg("TV frequency out of range (%d > %d)", |
| freq, params->ranges[i - 1].limit); |
| freq = params->ranges[--i].limit; |
| } |
| config = params->ranges[i].config; |
| cb = params->ranges[i].cb; |
| /* i == 0 -> VHF_LO |
| * i == 1 -> VHF_HI |
| * i == 2 -> UHF */ |
| tuner_dbg("tv: param %d, range %d\n",j,i); |
| |
| div=freq + IFPCoff + offset; |
| |
| tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, Offset=%d.%02d MHz, div=%0d\n", |
| freq / 16, freq % 16 * 100 / 16, |
| IFPCoff / 16, IFPCoff % 16 * 100 / 16, |
| offset / 16, offset % 16 * 100 / 16, |
| div); |
| |
| /* tv norm specific stuff for multi-norm tuners */ |
| switch (t->type) { |
| case TUNER_PHILIPS_SECAM: // FI1216MF |
| /* 0x01 -> ??? no change ??? */ |
| /* 0x02 -> PAL BDGHI / SECAM L */ |
| /* 0x04 -> ??? PAL others / SECAM others ??? */ |
| cb &= ~0x02; |
| if (t->std & V4L2_STD_SECAM) |
| cb |= 0x02; |
| break; |
| |
| case TUNER_TEMIC_4046FM5: |
| cb &= ~0x0f; |
| |
| if (t->std & V4L2_STD_PAL_BG) { |
| cb |= TEMIC_SET_PAL_BG; |
| |
| } else if (t->std & V4L2_STD_PAL_I) { |
| cb |= TEMIC_SET_PAL_I; |
| |
| } else if (t->std & V4L2_STD_PAL_DK) { |
| cb |= TEMIC_SET_PAL_DK; |
| |
| } else if (t->std & V4L2_STD_SECAM_L) { |
| cb |= TEMIC_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_FQ1216ME: |
| cb &= ~0x0f; |
| |
| if (t->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { |
| cb |= PHILIPS_SET_PAL_BGDK; |
| |
| } else if (t->std & V4L2_STD_PAL_I) { |
| cb |= PHILIPS_SET_PAL_I; |
| |
| } else if (t->std & V4L2_STD_SECAM_L) { |
| cb |= PHILIPS_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_ATSC: |
| /* 0x00 -> ATSC antenna input 1 */ |
| /* 0x01 -> ATSC antenna input 2 */ |
| /* 0x02 -> NTSC antenna input 1 */ |
| /* 0x03 -> NTSC antenna input 2 */ |
| cb &= ~0x03; |
| if (!(t->std & V4L2_STD_ATSC)) |
| cb |= 2; |
| /* FIXME: input */ |
| break; |
| |
| case TUNER_MICROTUNE_4042FI5: |
| /* Set the charge pump for fast tuning */ |
| config |= TUNER_CHARGE_PUMP; |
| break; |
| |
| case TUNER_PHILIPS_TUV1236D: |
| /* 0x40 -> ATSC antenna input 1 */ |
| /* 0x48 -> ATSC antenna input 2 */ |
| /* 0x00 -> NTSC antenna input 1 */ |
| /* 0x08 -> NTSC antenna input 2 */ |
| buffer[0] = 0x14; |
| buffer[1] = 0x00; |
| buffer[2] = 0x17; |
| buffer[3] = 0x00; |
| cb &= ~0x40; |
| if (t->std & V4L2_STD_ATSC) { |
| cb |= 0x40; |
| buffer[1] = 0x04; |
| } |
| /* set to the correct mode (analog or digital) */ |
| tuneraddr = c->addr; |
| c->addr = 0x0a; |
| if (2 != (rc = i2c_master_send(c,&buffer[0],2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| if (2 != (rc = i2c_master_send(c,&buffer[2],2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| c->addr = tuneraddr; |
| /* FIXME: input */ |
| break; |
| } |
| |
| if (params->cb_first_if_lower_freq && div < t->last_div) { |
| buffer[0] = config; |
| buffer[1] = cb; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| } |
| t->last_div = div; |
| if (params->has_tda9887) { |
| int config = 0; |
| int is_secam_l = (t->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) && |
| !(t->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)); |
| |
| if (t->std == V4L2_STD_SECAM_LC) { |
| if (params->port1_active ^ params->port1_invert_for_secam_lc) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (params->port2_active ^ params->port2_invert_for_secam_lc) |
| config |= TDA9887_PORT2_ACTIVE; |
| } |
| else { |
| if (params->port1_active) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (params->port2_active) |
| config |= TDA9887_PORT2_ACTIVE; |
| } |
| if (params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| if (is_secam_l) { |
| if (i == 0 && params->default_top_secam_low) |
| config |= TDA9887_TOP(params->default_top_secam_low); |
| else if (i == 1 && params->default_top_secam_mid) |
| config |= TDA9887_TOP(params->default_top_secam_mid); |
| else if (params->default_top_secam_high) |
| config |= TDA9887_TOP(params->default_top_secam_high); |
| } |
| else { |
| if (i == 0 && params->default_top_low) |
| config |= TDA9887_TOP(params->default_top_low); |
| else if (i == 1 && params->default_top_mid) |
| config |= TDA9887_TOP(params->default_top_mid); |
| else if (params->default_top_high) |
| config |= TDA9887_TOP(params->default_top_high); |
| } |
| if (params->default_pll_gating_18) |
| config |= TDA9887_GATING_18; |
| i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config); |
| } |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| |
| switch (t->type) { |
| case TUNER_LG_TDVS_H06XF: |
| /* Set the Auxiliary Byte. */ |
| buffer[0] = buffer[2]; |
| buffer[0] &= ~0x20; |
| buffer[0] |= 0x18; |
| buffer[1] = 0x20; |
| tuner_dbg("tv 0x%02x 0x%02x\n",buffer[0],buffer[1]); |
| |
| if (2 != (rc = i2c_master_send(c,buffer,2))) |
| tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); |
| break; |
| case TUNER_MICROTUNE_4042FI5: |
| { |
| // FIXME - this may also work for other tuners |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| u8 status_byte = 0; |
| |
| /* Wait until the PLL locks */ |
| for (;;) { |
| if (time_after(jiffies,timeout)) |
| return; |
| if (1 != (rc = i2c_master_recv(c,&status_byte,1))) { |
| tuner_warn("i2c i/o read error: rc == %d (should be 1)\n",rc); |
| break; |
| } |
| if (status_byte & TUNER_PLL_LOCKED) |
| break; |
| udelay(10); |
| } |
| |
| /* Set the charge pump for optimized phase noise figure */ |
| config &= ~TUNER_CHARGE_PUMP; |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| break; |
| } |
| } |
| } |
| |
| static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tunertype *tun; |
| struct tuner *t = i2c_get_clientdata(c); |
| u8 buffer[4]; |
| u16 div; |
| int rc, j; |
| enum param_type desired_type = TUNER_PARAM_TYPE_RADIO; |
| struct tuner_params *params; |
| |
| tun = &tuners[t->type]; |
| |
| for (j = 0; j < tun->count-1; j++) { |
| if (desired_type != tun->params[j].type) |
| continue; |
| break; |
| } |
| /* use default tuner_params if desired_type not available */ |
| if (desired_type != tun->params[j].type) |
| j = 0; |
| |
| div = (20 * freq / 16000) + (int)(20*10.7); /* IF 10.7 MHz */ |
| params = &tun->params[j]; |
| buffer[2] = (params->ranges[0].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */ |
| |
| switch (t->type) { |
| case TUNER_TENA_9533_DI: |
| case TUNER_YMEC_TVF_5533MF: |
| tuner_dbg ("This tuner doesn't have FM. Most cards has a TEA5767 for FM\n"); |
| return; |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FMD1216ME_MK3: |
| case TUNER_LG_NTSC_TAPE: |
| buffer[3] = 0x19; |
| break; |
| case TUNER_TNF_5335MF: |
| buffer[3] = 0x11; |
| break; |
| case TUNER_PHILIPS_FM1256_IH3: |
| div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */ |
| buffer[3] = 0x19; |
| break; |
| case TUNER_LG_PAL_FM: |
| buffer[3] = 0xa5; |
| break; |
| case TUNER_MICROTUNE_4049FM5: |
| div = (20 * freq) / 16000 + (int)(33.3 * 20); /* IF 33.3 MHz */ |
| buffer[3] = 0xa4; |
| break; |
| default: |
| buffer[3] = 0xa4; |
| break; |
| } |
| if (params->cb_first_if_lower_freq && div < t->last_div) { |
| buffer[0] = buffer[2]; |
| buffer[1] = buffer[3]; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| } |
| |
| tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0],buffer[1],buffer[2],buffer[3]); |
| t->last_div = div; |
| |
| if (params->has_tda9887) { |
| int config = 0; |
| if (params->port1_active && !params->port1_fm_high_sensitivity) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (params->port2_active && !params->port2_fm_high_sensitivity) |
| config |= TDA9887_PORT2_ACTIVE; |
| if (params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| /* if (params->port1_set_for_fm_mono) |
| config &= ~TDA9887_PORT1_ACTIVE;*/ |
| if (params->fm_gain_normal) |
| config |= TDA9887_GAIN_NORMAL; |
| i2c_clients_command(c->adapter, TDA9887_SET_CONFIG, &config); |
| } |
| if (4 != (rc = i2c_master_send(c,buffer,4))) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); |
| } |
| |
| int default_tuner_init(struct i2c_client *c) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| tuner_info("type set to %d (%s)\n", |
| t->type, tuners[t->type].name); |
| strlcpy(c->name, tuners[t->type].name, sizeof(c->name)); |
| |
| t->set_tv_freq = default_set_tv_freq; |
| t->set_radio_freq = default_set_radio_freq; |
| t->has_signal = tuner_signal; |
| t->is_stereo = tuner_stereo; |
| t->standby = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |