| /* |
| * saa7191.c - Philips SAA7191 video decoder driver |
| * |
| * Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org> |
| * Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/major.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| |
| #include <linux/videodev.h> |
| #include <linux/video_decoder.h> |
| #include <linux/i2c.h> |
| |
| #include "saa7191.h" |
| |
| #define SAA7191_MODULE_VERSION "0.0.5" |
| |
| MODULE_DESCRIPTION("Philips SAA7191 video decoder driver"); |
| MODULE_VERSION(SAA7191_MODULE_VERSION); |
| MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>"); |
| MODULE_LICENSE("GPL"); |
| |
| // #define SAA7191_DEBUG |
| |
| #ifdef SAA7191_DEBUG |
| #define dprintk(x...) printk("SAA7191: " x); |
| #else |
| #define dprintk(x...) |
| #endif |
| |
| #define SAA7191_SYNC_COUNT 30 |
| #define SAA7191_SYNC_DELAY 100 /* milliseconds */ |
| |
| struct saa7191 { |
| struct i2c_client *client; |
| |
| /* the register values are stored here as the actual |
| * I2C-registers are write-only */ |
| u8 reg[25]; |
| |
| int input; |
| int norm; |
| }; |
| |
| static struct i2c_driver i2c_driver_saa7191; |
| |
| static const u8 initseq[] = { |
| 0, /* Subaddress */ |
| |
| 0x50, /* (0x50) SAA7191_REG_IDEL */ |
| |
| /* 50 Hz signal timing */ |
| 0x30, /* (0x30) SAA7191_REG_HSYB */ |
| 0x00, /* (0x00) SAA7191_REG_HSYS */ |
| 0xe8, /* (0xe8) SAA7191_REG_HCLB */ |
| 0xb6, /* (0xb6) SAA7191_REG_HCLS */ |
| 0xf4, /* (0xf4) SAA7191_REG_HPHI */ |
| |
| /* control */ |
| SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */ |
| 0x00, /* (0x00) SAA7191_REG_HUEC */ |
| 0xf8, /* (0xf8) SAA7191_REG_CKTQ */ |
| 0xf8, /* (0xf8) SAA7191_REG_CKTS */ |
| 0x90, /* (0x90) SAA7191_REG_PLSE */ |
| 0x90, /* (0x90) SAA7191_REG_SESE */ |
| 0x00, /* (0x00) SAA7191_REG_GAIN */ |
| SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC |
| * - not SECAM, |
| * slow time constant */ |
| SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS |
| | SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK |
| * - chroma from CVBS, GPSW1 & 2 off */ |
| SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS |
| | SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3 |
| * - automatic field detection */ |
| 0x00, /* (0x00) SAA7191_REG_CTL4 */ |
| 0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */ |
| 0x00, /* unused */ |
| 0x00, /* unused */ |
| |
| /* 60 Hz signal timing */ |
| 0x34, /* (0x34) SAA7191_REG_HS6B */ |
| 0x0a, /* (0x0a) SAA7191_REG_HS6S */ |
| 0xf4, /* (0xf4) SAA7191_REG_HC6B */ |
| 0xce, /* (0xce) SAA7191_REG_HC6S */ |
| 0xf4, /* (0xf4) SAA7191_REG_HP6I */ |
| }; |
| |
| /* SAA7191 register handling */ |
| |
| static u8 saa7191_read_reg(struct i2c_client *client, |
| u8 reg) |
| { |
| return ((struct saa7191 *)i2c_get_clientdata(client))->reg[reg]; |
| } |
| |
| static int saa7191_read_status(struct i2c_client *client, |
| u8 *value) |
| { |
| int ret; |
| |
| ret = i2c_master_recv(client, value, 1); |
| if (ret < 0) { |
| printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int saa7191_write_reg(struct i2c_client *client, u8 reg, |
| u8 value) |
| { |
| ((struct saa7191 *)i2c_get_clientdata(client))->reg[reg] = value; |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| /* the first byte of data must be the first subaddress number (register) */ |
| static int saa7191_write_block(struct i2c_client *client, |
| u8 length, u8 *data) |
| { |
| int i; |
| int ret; |
| |
| struct saa7191 *decoder = (struct saa7191 *)i2c_get_clientdata(client); |
| for (i = 0; i < (length - 1); i++) { |
| decoder->reg[data[0] + i] = data[i + 1]; |
| } |
| |
| ret = i2c_master_send(client, data, length); |
| if (ret < 0) { |
| printk(KERN_ERR "SAA7191: saa7191_write_block(): " |
| "write failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Helper functions */ |
| |
| static int saa7191_set_input(struct i2c_client *client, int input) |
| { |
| struct saa7191 *decoder = i2c_get_clientdata(client); |
| u8 luma = saa7191_read_reg(client, SAA7191_REG_LUMA); |
| u8 iock = saa7191_read_reg(client, SAA7191_REG_IOCK); |
| int err; |
| |
| switch (input) { |
| case SAA7191_INPUT_COMPOSITE: /* Set Composite input */ |
| iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1 |
| | SAA7191_IOCK_GPSW2); |
| /* Chrominance trap active */ |
| luma &= ~SAA7191_LUMA_BYPS; |
| break; |
| case SAA7191_INPUT_SVIDEO: /* Set S-Video input */ |
| iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2; |
| /* Chrominance trap bypassed */ |
| luma |= SAA7191_LUMA_BYPS; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| err = saa7191_write_reg(client, SAA7191_REG_LUMA, luma); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(client, SAA7191_REG_IOCK, iock); |
| if (err) |
| return -EIO; |
| |
| decoder->input = input; |
| |
| return 0; |
| } |
| |
| static int saa7191_set_norm(struct i2c_client *client, int norm) |
| { |
| struct saa7191 *decoder = i2c_get_clientdata(client); |
| u8 stdc = saa7191_read_reg(client, SAA7191_REG_STDC); |
| u8 ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3); |
| u8 chcv = saa7191_read_reg(client, SAA7191_REG_CHCV); |
| int err; |
| |
| switch(norm) { |
| case SAA7191_NORM_PAL: |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); |
| chcv = SAA7191_CHCV_PAL; |
| break; |
| case SAA7191_NORM_NTSC: |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~SAA7191_CTL3_AUFD; |
| ctl3 |= SAA7191_CTL3_FSEL; |
| chcv = SAA7191_CHCV_NTSC; |
| break; |
| case SAA7191_NORM_SECAM: |
| stdc |= SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL); |
| chcv = SAA7191_CHCV_PAL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(client, SAA7191_REG_STDC, stdc); |
| if (err) |
| return -EIO; |
| err = saa7191_write_reg(client, SAA7191_REG_CHCV, chcv); |
| if (err) |
| return -EIO; |
| |
| decoder->norm = norm; |
| |
| dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3, |
| stdc, chcv); |
| dprintk("norm: %d\n", norm); |
| |
| return 0; |
| } |
| |
| static int saa7191_wait_for_signal(struct i2c_client *client, u8 *status) |
| { |
| int i = 0; |
| |
| dprintk("Checking for signal...\n"); |
| |
| for (i = 0; i < SAA7191_SYNC_COUNT; i++) { |
| if (saa7191_read_status(client, status)) |
| return -EIO; |
| |
| if (((*status) & SAA7191_STATUS_HLCK) == 0) { |
| dprintk("Signal found\n"); |
| return 0; |
| } |
| |
| msleep(SAA7191_SYNC_DELAY); |
| } |
| |
| dprintk("No signal\n"); |
| |
| return -EBUSY; |
| } |
| |
| static int saa7191_autodetect_norm_extended(struct i2c_client *client) |
| { |
| u8 stdc = saa7191_read_reg(client, SAA7191_REG_STDC); |
| u8 ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3); |
| u8 status; |
| int err = 0; |
| |
| dprintk("SAA7191 extended signal auto-detection...\n"); |
| |
| stdc &= ~SAA7191_STDC_SECS; |
| ctl3 &= ~(SAA7191_CTL3_FSEL); |
| |
| err = saa7191_write_reg(client, SAA7191_REG_STDC, stdc); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| |
| ctl3 |= SAA7191_CTL3_AUFD; |
| err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3); |
| if (err) { |
| err = -EIO; |
| goto out; |
| } |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(client, &status); |
| if (err) |
| goto out; |
| |
| if (status & SAA7191_STATUS_FIDT) { |
| /* 60Hz signal -> NTSC */ |
| dprintk("60Hz signal: NTSC\n"); |
| return saa7191_set_norm(client, SAA7191_NORM_NTSC); |
| } |
| |
| /* 50Hz signal */ |
| dprintk("50Hz signal: Trying PAL...\n"); |
| |
| /* try PAL first */ |
| err = saa7191_set_norm(client, SAA7191_NORM_PAL); |
| if (err) |
| goto out; |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(client, &status); |
| if (err) |
| goto out; |
| |
| /* not 50Hz ? */ |
| if (status & SAA7191_STATUS_FIDT) { |
| dprintk("No 50Hz signal\n"); |
| err = -EAGAIN; |
| goto out; |
| } |
| |
| if (status & SAA7191_STATUS_CODE) { |
| dprintk("PAL\n"); |
| return 0; |
| } |
| |
| dprintk("No color detected with PAL - Trying SECAM...\n"); |
| |
| /* no color detected ? -> try SECAM */ |
| err = saa7191_set_norm(client, |
| SAA7191_NORM_SECAM); |
| if (err) |
| goto out; |
| |
| msleep(SAA7191_SYNC_DELAY); |
| |
| err = saa7191_wait_for_signal(client, &status); |
| if (err) |
| goto out; |
| |
| /* not 50Hz ? */ |
| if (status & SAA7191_STATUS_FIDT) { |
| dprintk("No 50Hz signal\n"); |
| err = -EAGAIN; |
| goto out; |
| } |
| |
| if (status & SAA7191_STATUS_CODE) { |
| /* Color detected -> SECAM */ |
| dprintk("SECAM\n"); |
| return 0; |
| } |
| |
| dprintk("No color detected with SECAM - Going back to PAL.\n"); |
| |
| /* still no color detected ? |
| * -> set norm back to PAL */ |
| err = saa7191_set_norm(client, |
| SAA7191_NORM_PAL); |
| if (err) |
| goto out; |
| |
| out: |
| ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3); |
| if (ctl3 & SAA7191_CTL3_AUFD) { |
| ctl3 &= ~(SAA7191_CTL3_AUFD); |
| err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3); |
| if (err) { |
| err = -EIO; |
| } |
| } |
| |
| return err; |
| } |
| |
| static int saa7191_autodetect_norm(struct i2c_client *client) |
| { |
| u8 status; |
| |
| dprintk("SAA7191 signal auto-detection...\n"); |
| |
| dprintk("Reading status...\n"); |
| |
| if (saa7191_read_status(client, &status)) |
| return -EIO; |
| |
| dprintk("Checking for signal...\n"); |
| |
| /* no signal ? */ |
| if (status & SAA7191_STATUS_HLCK) { |
| dprintk("No signal\n"); |
| return -EBUSY; |
| } |
| |
| dprintk("Signal found\n"); |
| |
| if (status & SAA7191_STATUS_FIDT) { |
| /* 60hz signal -> NTSC */ |
| dprintk("NTSC\n"); |
| return saa7191_set_norm(client, SAA7191_NORM_NTSC); |
| } else { |
| /* 50hz signal -> PAL */ |
| dprintk("PAL\n"); |
| return saa7191_set_norm(client, SAA7191_NORM_PAL); |
| } |
| } |
| |
| static int saa7191_get_control(struct i2c_client *client, |
| struct saa7191_control *ctrl) |
| { |
| u8 reg; |
| int ret = 0; |
| |
| switch (ctrl->type) { |
| case SAA7191_CONTROL_BANDPASS: |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| case SAA7191_CONTROL_CORING: |
| reg = saa7191_read_reg(client, SAA7191_REG_LUMA); |
| switch (ctrl->type) { |
| case SAA7191_CONTROL_BANDPASS: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK) |
| >> SAA7191_LUMA_BPSS_SHIFT; |
| break; |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK) |
| >> SAA7191_LUMA_APER_SHIFT; |
| break; |
| case SAA7191_CONTROL_CORING: |
| ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK) |
| >> SAA7191_LUMA_CORI_SHIFT; |
| break; |
| } |
| break; |
| case SAA7191_CONTROL_FORCE_COLOUR: |
| case SAA7191_CONTROL_CHROMA_GAIN: |
| reg = saa7191_read_reg(client, SAA7191_REG_GAIN); |
| if (ctrl->type == SAA7191_CONTROL_FORCE_COLOUR) |
| ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0; |
| else |
| ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK) |
| >> SAA7191_GAIN_LFIS_SHIFT; |
| break; |
| case SAA7191_CONTROL_HUE: |
| reg = saa7191_read_reg(client, SAA7191_REG_HUEC); |
| if (reg < 0x80) |
| reg += 0x80; |
| else |
| reg -= 0x80; |
| ctrl->value = (s32)reg; |
| break; |
| case SAA7191_CONTROL_VTRC: |
| reg = saa7191_read_reg(client, SAA7191_REG_STDC); |
| ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0; |
| break; |
| case SAA7191_CONTROL_LUMA_DELAY: |
| reg = saa7191_read_reg(client, SAA7191_REG_CTL3); |
| ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK) |
| >> SAA7191_CTL3_YDEL_SHIFT; |
| if (ctrl->value >= 4) |
| ctrl->value -= 8; |
| break; |
| case SAA7191_CONTROL_VNR: |
| reg = saa7191_read_reg(client, SAA7191_REG_CTL4); |
| ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK) |
| >> SAA7191_CTL4_VNOI_SHIFT; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int saa7191_set_control(struct i2c_client *client, |
| struct saa7191_control *ctrl) |
| { |
| u8 reg; |
| int ret = 0; |
| |
| switch (ctrl->type) { |
| case SAA7191_CONTROL_BANDPASS: |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| case SAA7191_CONTROL_CORING: |
| reg = saa7191_read_reg(client, SAA7191_REG_LUMA); |
| switch (ctrl->type) { |
| case SAA7191_CONTROL_BANDPASS: |
| reg &= ~SAA7191_LUMA_BPSS_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT) |
| & SAA7191_LUMA_BPSS_MASK; |
| break; |
| case SAA7191_CONTROL_BANDPASS_WEIGHT: |
| reg &= ~SAA7191_LUMA_APER_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT) |
| & SAA7191_LUMA_APER_MASK; |
| break; |
| case SAA7191_CONTROL_CORING: |
| reg &= ~SAA7191_LUMA_CORI_MASK; |
| reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT) |
| & SAA7191_LUMA_CORI_MASK; |
| break; |
| } |
| ret = saa7191_write_reg(client, SAA7191_REG_LUMA, reg); |
| break; |
| case SAA7191_CONTROL_FORCE_COLOUR: |
| case SAA7191_CONTROL_CHROMA_GAIN: |
| reg = saa7191_read_reg(client, SAA7191_REG_GAIN); |
| if (ctrl->type == SAA7191_CONTROL_FORCE_COLOUR) { |
| if (ctrl->value) |
| reg |= SAA7191_GAIN_COLO; |
| else |
| reg &= ~SAA7191_GAIN_COLO; |
| } else { |
| reg &= ~SAA7191_GAIN_LFIS_MASK; |
| reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT) |
| & SAA7191_GAIN_LFIS_MASK; |
| } |
| ret = saa7191_write_reg(client, SAA7191_REG_GAIN, reg); |
| break; |
| case SAA7191_CONTROL_HUE: |
| reg = ctrl->value & 0xff; |
| if (reg < 0x80) |
| reg += 0x80; |
| else |
| reg -= 0x80; |
| ret = saa7191_write_reg(client, SAA7191_REG_HUEC, reg); |
| break; |
| case SAA7191_CONTROL_VTRC: |
| reg = saa7191_read_reg(client, SAA7191_REG_STDC); |
| if (ctrl->value) |
| reg |= SAA7191_STDC_VTRC; |
| else |
| reg &= ~SAA7191_STDC_VTRC; |
| ret = saa7191_write_reg(client, SAA7191_REG_STDC, reg); |
| break; |
| case SAA7191_CONTROL_LUMA_DELAY: { |
| s32 value = ctrl->value; |
| if (value < 0) |
| value += 8; |
| reg = saa7191_read_reg(client, SAA7191_REG_CTL3); |
| reg &= ~SAA7191_CTL3_YDEL_MASK; |
| reg |= (value << SAA7191_CTL3_YDEL_SHIFT) |
| & SAA7191_CTL3_YDEL_MASK; |
| ret = saa7191_write_reg(client, SAA7191_REG_CTL3, reg); |
| break; |
| } |
| case SAA7191_CONTROL_VNR: |
| reg = saa7191_read_reg(client, SAA7191_REG_CTL4); |
| reg &= ~SAA7191_CTL4_VNOI_MASK; |
| reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT) |
| & SAA7191_CTL4_VNOI_MASK; |
| ret = saa7191_write_reg(client, SAA7191_REG_CTL4, reg); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| /* I2C-interface */ |
| |
| static int saa7191_attach(struct i2c_adapter *adap, int addr, int kind) |
| { |
| int err = 0; |
| struct saa7191 *decoder; |
| struct i2c_client *client; |
| |
| printk(KERN_INFO "Philips SAA7191 driver version %s\n", |
| SAA7191_MODULE_VERSION); |
| |
| client = kzalloc(sizeof(*client), GFP_KERNEL); |
| if (!client) |
| return -ENOMEM; |
| decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); |
| if (!decoder) { |
| err = -ENOMEM; |
| goto out_free_client; |
| } |
| |
| client->addr = addr; |
| client->adapter = adap; |
| client->driver = &i2c_driver_saa7191; |
| client->flags = 0; |
| strcpy(client->name, "saa7191 client"); |
| i2c_set_clientdata(client, decoder); |
| |
| decoder->client = client; |
| |
| err = i2c_attach_client(client); |
| if (err) |
| goto out_free_decoder; |
| |
| err = saa7191_write_block(client, sizeof(initseq), (u8 *)initseq); |
| if (err) { |
| printk(KERN_ERR "SAA7191 initialization failed\n"); |
| goto out_detach_client; |
| } |
| |
| printk(KERN_INFO "SAA7191 initialized\n"); |
| |
| decoder->input = SAA7191_INPUT_COMPOSITE; |
| decoder->norm = SAA7191_NORM_PAL; |
| |
| err = saa7191_autodetect_norm(client); |
| if (err && (err != -EBUSY)) { |
| printk(KERN_ERR "SAA7191: Signal auto-detection failed\n"); |
| } |
| |
| return 0; |
| |
| out_detach_client: |
| i2c_detach_client(client); |
| out_free_decoder: |
| kfree(decoder); |
| out_free_client: |
| kfree(client); |
| return err; |
| } |
| |
| static int saa7191_probe(struct i2c_adapter *adap) |
| { |
| /* Always connected to VINO */ |
| if (adap->id == I2C_HW_SGI_VINO) |
| return saa7191_attach(adap, SAA7191_ADDR, 0); |
| /* Feel free to add probe here :-) */ |
| return -ENODEV; |
| } |
| |
| static int saa7191_detach(struct i2c_client *client) |
| { |
| struct saa7191 *decoder = i2c_get_clientdata(client); |
| |
| i2c_detach_client(client); |
| kfree(decoder); |
| kfree(client); |
| return 0; |
| } |
| |
| static int saa7191_command(struct i2c_client *client, unsigned int cmd, |
| void *arg) |
| { |
| struct saa7191 *decoder = i2c_get_clientdata(client); |
| |
| switch (cmd) { |
| case DECODER_GET_CAPABILITIES: { |
| struct video_decoder_capability *cap = arg; |
| |
| cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | |
| VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO; |
| cap->inputs = (client->adapter->id == I2C_HW_SGI_VINO) ? 2 : 1; |
| cap->outputs = 1; |
| break; |
| } |
| case DECODER_GET_STATUS: { |
| int *iarg = arg; |
| u8 status; |
| int res = 0; |
| |
| if (saa7191_read_status(client, &status)) { |
| return -EIO; |
| } |
| if ((status & SAA7191_STATUS_HLCK) == 0) |
| res |= DECODER_STATUS_GOOD; |
| if (status & SAA7191_STATUS_CODE) |
| res |= DECODER_STATUS_COLOR; |
| switch (decoder->norm) { |
| case SAA7191_NORM_NTSC: |
| res |= DECODER_STATUS_NTSC; |
| break; |
| case SAA7191_NORM_PAL: |
| res |= DECODER_STATUS_PAL; |
| break; |
| case SAA7191_NORM_SECAM: |
| res |= DECODER_STATUS_SECAM; |
| break; |
| case SAA7191_NORM_AUTO: |
| default: |
| if (status & SAA7191_STATUS_FIDT) |
| res |= DECODER_STATUS_NTSC; |
| else |
| res |= DECODER_STATUS_PAL; |
| break; |
| } |
| *iarg = res; |
| break; |
| } |
| case DECODER_SET_NORM: { |
| int *iarg = arg; |
| |
| switch (*iarg) { |
| case VIDEO_MODE_AUTO: |
| return saa7191_autodetect_norm(client); |
| case VIDEO_MODE_PAL: |
| return saa7191_set_norm(client, SAA7191_NORM_PAL); |
| case VIDEO_MODE_NTSC: |
| return saa7191_set_norm(client, SAA7191_NORM_NTSC); |
| case VIDEO_MODE_SECAM: |
| return saa7191_set_norm(client, SAA7191_NORM_SECAM); |
| default: |
| return -EINVAL; |
| } |
| break; |
| } |
| case DECODER_SET_INPUT: { |
| int *iarg = arg; |
| |
| switch (client->adapter->id) { |
| case I2C_HW_SGI_VINO: |
| return saa7191_set_input(client, *iarg); |
| default: |
| if (*iarg != 0) |
| return -EINVAL; |
| } |
| break; |
| } |
| case DECODER_SET_OUTPUT: { |
| int *iarg = arg; |
| |
| /* not much choice of outputs */ |
| if (*iarg != 0) |
| return -EINVAL; |
| break; |
| } |
| case DECODER_ENABLE_OUTPUT: { |
| /* Always enabled */ |
| break; |
| } |
| case DECODER_SET_PICTURE: { |
| struct video_picture *pic = arg; |
| unsigned val; |
| int err; |
| |
| val = (pic->hue >> 8) - 0x80; |
| |
| err = saa7191_write_reg(client, SAA7191_REG_HUEC, val); |
| if (err) |
| return -EIO; |
| |
| break; |
| } |
| case DECODER_SAA7191_GET_STATUS: { |
| struct saa7191_status *status = arg; |
| u8 status_reg; |
| |
| if (saa7191_read_status(client, &status_reg)) |
| return -EIO; |
| |
| status->signal = ((status_reg & SAA7191_STATUS_HLCK) == 0) |
| ? 1 : 0; |
| status->signal_60hz = (status_reg & SAA7191_STATUS_FIDT) |
| ? 1 : 0; |
| status->color = (status_reg & SAA7191_STATUS_CODE) ? 1 : 0; |
| |
| status->input = decoder->input; |
| status->norm = decoder->norm; |
| |
| break; |
| } |
| case DECODER_SAA7191_SET_NORM: { |
| int *norm = arg; |
| |
| switch (*norm) { |
| case SAA7191_NORM_AUTO: |
| return saa7191_autodetect_norm(client); |
| case SAA7191_NORM_AUTO_EXT: |
| return saa7191_autodetect_norm_extended(client); |
| default: |
| return saa7191_set_norm(client, *norm); |
| } |
| } |
| case DECODER_SAA7191_GET_CONTROL: { |
| return saa7191_get_control(client, arg); |
| } |
| case DECODER_SAA7191_SET_CONTROL: { |
| return saa7191_set_control(client, arg); |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct i2c_driver i2c_driver_saa7191 = { |
| .driver = { |
| .name = "saa7191", |
| }, |
| .id = I2C_DRIVERID_SAA7191, |
| .attach_adapter = saa7191_probe, |
| .detach_client = saa7191_detach, |
| .command = saa7191_command |
| }; |
| |
| static int saa7191_init(void) |
| { |
| return i2c_add_driver(&i2c_driver_saa7191); |
| } |
| |
| static void saa7191_exit(void) |
| { |
| i2c_del_driver(&i2c_driver_saa7191); |
| } |
| |
| module_init(saa7191_init); |
| module_exit(saa7191_exit); |