| /*- |
| * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any |
| * redistribution must be conditioned upon including a substantially |
| * similar Disclaimer requirement for further binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY |
| * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, |
| * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER |
| * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGES. |
| * |
| */ |
| |
| /* |
| * Defintions for the Atheros Wireless LAN controller driver. |
| */ |
| #ifndef _DEV_ATH_ATHVAR_H |
| #define _DEV_ATH_ATHVAR_H |
| |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/wireless.h> |
| #include <linux/if_ether.h> |
| |
| #include "ath5k.h" |
| #include "debug.h" |
| |
| #define ATH_RXBUF 40 /* number of RX buffers */ |
| #define ATH_TXBUF 200 /* number of TX buffers */ |
| #define ATH_BCBUF 1 /* number of beacon buffers */ |
| |
| struct ath5k_buf { |
| struct list_head list; |
| unsigned int flags; /* tx descriptor flags */ |
| struct ath5k_desc *desc; /* virtual addr of desc */ |
| dma_addr_t daddr; /* physical addr of desc */ |
| struct sk_buff *skb; /* skbuff for buf */ |
| dma_addr_t skbaddr;/* physical addr of skb data */ |
| }; |
| |
| /* |
| * Data transmit queue state. One of these exists for each |
| * hardware transmit queue. Packets sent to us from above |
| * are assigned to queues based on their priority. Not all |
| * devices support a complete set of hardware transmit queues. |
| * For those devices the array sc_ac2q will map multiple |
| * priorities to fewer hardware queues (typically all to one |
| * hardware queue). |
| */ |
| struct ath5k_txq { |
| unsigned int qnum; /* hardware q number */ |
| u32 *link; /* link ptr in last TX desc */ |
| struct list_head q; /* transmit queue */ |
| spinlock_t lock; /* lock on q and link */ |
| bool setup; |
| }; |
| |
| #if CHAN_DEBUG |
| #define ATH_CHAN_MAX (26+26+26+200+200) |
| #else |
| #define ATH_CHAN_MAX (14+14+14+252+20) |
| #endif |
| |
| /* Software Carrier, keeps track of the driver state |
| * associated with an instance of a device */ |
| struct ath5k_softc { |
| struct pci_dev *pdev; /* for dma mapping */ |
| void __iomem *iobase; /* address of the device */ |
| struct mutex lock; /* dev-level lock */ |
| /* FIXME: how many does it really need? */ |
| struct ieee80211_tx_queue_stats tx_stats[16]; |
| struct ieee80211_low_level_stats ll_stats; |
| struct ieee80211_hw *hw; /* IEEE 802.11 common */ |
| struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; |
| struct ieee80211_channel channels[ATH_CHAN_MAX]; |
| struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS]; |
| enum ieee80211_if_types opmode; |
| struct ath5k_hw *ah; /* Atheros HW */ |
| |
| struct ieee80211_supported_band *curband; |
| |
| u8 a_rates; |
| u8 b_rates; |
| u8 g_rates; |
| u8 xr_rates; |
| |
| #ifdef CONFIG_ATH5K_DEBUG |
| struct ath5k_dbg_info debug; /* debug info */ |
| #endif /* CONFIG_ATH5K_DEBUG */ |
| |
| struct ath5k_buf *bufptr; /* allocated buffer ptr */ |
| struct ath5k_desc *desc; /* TX/RX descriptors */ |
| dma_addr_t desc_daddr; /* DMA (physical) address */ |
| size_t desc_len; /* size of TX/RX descriptors */ |
| u16 cachelsz; /* cache line size */ |
| |
| DECLARE_BITMAP(status, 6); |
| #define ATH_STAT_INVALID 0 /* disable hardware accesses */ |
| #define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ |
| #define ATH_STAT_PROMISC 2 |
| #define ATH_STAT_LEDBLINKING 3 /* LED blink operation active */ |
| #define ATH_STAT_LEDENDBLINK 4 /* finish LED blink operation */ |
| #define ATH_STAT_LEDSOFT 5 /* enable LED gpio status */ |
| |
| unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ |
| unsigned int curmode; /* current phy mode */ |
| struct ieee80211_channel *curchan; /* current h/w channel */ |
| |
| struct ieee80211_vif *vif; |
| |
| struct { |
| u8 rxflags; /* radiotap rx flags */ |
| u8 txflags; /* radiotap tx flags */ |
| u16 ledon; /* softled on time */ |
| u16 ledoff; /* softled off time */ |
| } hwmap[32]; /* h/w rate ix mappings */ |
| |
| enum ath5k_int imask; /* interrupt mask copy */ |
| |
| DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ |
| |
| u8 bssidmask[ETH_ALEN]; |
| |
| unsigned int led_pin, /* GPIO pin for driving LED */ |
| led_on, /* pin setting for LED on */ |
| led_off; /* off time for current blink */ |
| struct timer_list led_tim; /* led off timer */ |
| u8 led_rxrate; /* current rx rate for LED */ |
| u8 led_txrate; /* current tx rate for LED */ |
| |
| struct tasklet_struct restq; /* reset tasklet */ |
| |
| unsigned int rxbufsize; /* rx size based on mtu */ |
| struct list_head rxbuf; /* receive buffer */ |
| spinlock_t rxbuflock; |
| u32 *rxlink; /* link ptr in last RX desc */ |
| struct tasklet_struct rxtq; /* rx intr tasklet */ |
| |
| struct list_head txbuf; /* transmit buffer */ |
| spinlock_t txbuflock; |
| unsigned int txbuf_len; /* buf count in txbuf list */ |
| struct ath5k_txq txqs[2]; /* beacon and tx */ |
| |
| struct ath5k_txq *txq; /* beacon and tx*/ |
| struct tasklet_struct txtq; /* tx intr tasklet */ |
| |
| struct ath5k_buf *bbuf; /* beacon buffer */ |
| unsigned int bhalq, /* SW q for outgoing beacons */ |
| bmisscount, /* missed beacon transmits */ |
| bintval, /* beacon interval in TU */ |
| bsent; |
| unsigned int nexttbtt; /* next beacon time in TU */ |
| |
| struct timer_list calib_tim; /* calibration timer */ |
| int power_level; /* Requested tx power in dbm */ |
| }; |
| |
| #define ath5k_hw_hasbssidmask(_ah) \ |
| (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0) |
| #define ath5k_hw_hasveol(_ah) \ |
| (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0) |
| |
| #endif |