arch/m68k/fpsp040/skeleton.S - maze/linux - Git at Google

 |
 |	skeleton.sa 3.2 4/26/91
 |
 |	This file contains code that is system dependent and will
 |	need to be modified to install the FPSP.
 |
 |	Each entry point for exception 'xxxx' begins with a 'jmp fpsp_xxxx'.
 |	Put any target system specific handling that must be done immediately
 |	before the jump instruction.  If there no handling necessary, then
 |	the 'fpsp_xxxx' handler entry point should be placed in the exception
 |	table so that the 'jmp' can be eliminated. If the FPSP determines that the
 |	exception is one that must be reported then there will be a
 |	return from the package by a 'jmp real_xxxx'.  At that point
 |	the machine state will be identical to the state before
 |	the FPSP was entered.  In particular, whatever condition
 |	that caused the exception will still be pending when the FPSP
 |	package returns.  Thus, there will be system specific code
 |	to handle the exception.
 |
 |	If the exception was completely handled by the package, then
 |	the return will be via a 'jmp fpsp_done'.  Unless there is
 |	OS specific work to be done (such as handling a context switch or
 |	interrupt) the user program can be resumed via 'rte'.
 |
 |	In the following skeleton code, some typical 'real_xxxx' handling
 |	code is shown.  This code may need to be moved to an appropriate
 |	place in the target system, or rewritten.
 |

 |		Copyright (C) Motorola, Inc. 1990
 |			All Rights Reserved
 |
 |	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
 |	The copyright notice above does not evidence any
 |	actual or intended publication of such source code.

 |
 |	Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)
 |

 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>

 |SKELETON	idnt    2,1 | Motorola 040 Floating Point Software Package

 	|section 15
 |
 |	The following counters are used for standalone testing
 |

 	|section 8

 #include "fpsp.h"

 	|xref	b1238_fix

 |
 |	Divide by Zero exception
 |
 |	All dz exceptions are 'real', hence no fpsp_dz entry point.
 |
 	.global	dz
 	.global	real_dz
 dz:
 real_dz:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E1,E_BYTE(%a6)
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Inexact exception
 |
 |	All inexact exceptions are real, but the 'real' handler
 |	will probably want to clear the pending exception.
 |	The provided code will clear the E3 exception (if pending),
 |	otherwise clear the E1 exception.  The frestore is not really
 |	necessary for E1 exceptions.
 |
 | Code following the 'inex' label is to handle bug #1232.  In this
 | bug, if an E1 snan, ovfl, or unfl occurred, and the process was
 | swapped out before taking the exception, the exception taken on
 | return was inex, rather than the correct exception.  The snan, ovfl,
 | and unfl exception to be taken must not have been enabled.  The
 | fix is to check for E1, and the existence of one of snan, ovfl,
 | or unfl bits set in the fpsr.  If any of these are set, branch
 | to the appropriate  handler for the exception in the fpsr.  Note
 | that this fix is only for d43b parts, and is skipped if the
 | version number is not $40.
 |
 |
 	.global	real_inex
 	.global	inex
 inex:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	cmpib		#VER_40,(%sp)		|test version number
 	bnes		not_fmt40
 	fmovel		%fpsr,-(%sp)
 	btstb		#E1,E_BYTE(%a6)		|test for E1 set
 	beqs		not_b1232
 	btstb		#snan_bit,2(%sp) |test for snan
 	beq		inex_ckofl
 	addl		#4,%sp
 	frestore	(%sp)+
 	unlk		%a6
 	bra		snan
 inex_ckofl:
 	btstb		#ovfl_bit,2(%sp) |test for ovfl
 	beq		inex_ckufl
 	addl		#4,%sp
 	frestore	(%sp)+
 	unlk		%a6
 	bra		ovfl
 inex_ckufl:
 	btstb		#unfl_bit,2(%sp) |test for unfl
 	beq		not_b1232
 	addl		#4,%sp
 	frestore	(%sp)+
 	unlk		%a6
 	bra		unfl

 |
 | We do not have the bug 1232 case.  Clean up the stack and call
 | real_inex.
 |
 not_b1232:
 	addl		#4,%sp
 	frestore	(%sp)+
 	unlk		%a6

 real_inex:

 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 not_fmt40:
 	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
 	beqs		inex_cke1
 |
 | Clear dirty bit on dest resister in the frame before branching
 | to b1238_fix.
 |
 	moveml		%d0/%d1,USER_DA(%a6)
 	bfextu		CMDREG1B(%a6){#6:#3},%d0		|get dest reg no
 	bclrb		%d0,FPR_DIRTY_BITS(%a6)	|clr dest dirty bit
 	bsrl		b1238_fix		|test for bug1238 case
 	moveml		USER_DA(%a6),%d0/%d1
 	bras		inex_done
 inex_cke1:
 	bclrb		#E1,E_BYTE(%a6)
 inex_done:
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Overflow exception
 |
 	|xref	fpsp_ovfl
 	.global	real_ovfl
 	.global	ovfl
 ovfl:
 	jmp	fpsp_ovfl
 real_ovfl:

 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
 	bnes		ovfl_done
 	bclrb		#E1,E_BYTE(%a6)
 ovfl_done:
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Underflow exception
 |
 	|xref	fpsp_unfl
 	.global	real_unfl
 	.global	unfl
 unfl:
 	jmp	fpsp_unfl
 real_unfl:

 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E3,E_BYTE(%a6)		|clear and test E3 flag
 	bnes		unfl_done
 	bclrb		#E1,E_BYTE(%a6)
 unfl_done:
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Signalling NAN exception
 |
 	|xref	fpsp_snan
 	.global	real_snan
 	.global	snan
 snan:
 	jmp	fpsp_snan
 real_snan:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E1,E_BYTE(%a6)	|snan is always an E1 exception
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Operand Error exception
 |
 	|xref	fpsp_operr
 	.global	real_operr
 	.global	operr
 operr:
 	jmp	fpsp_operr
 real_operr:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E1,E_BYTE(%a6)	|operr is always an E1 exception
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception


 |
 |	BSUN exception
 |
 |	This sample handler simply clears the nan bit in the FPSR.
 |
 	|xref	fpsp_bsun
 	.global	real_bsun
 	.global	bsun
 bsun:
 	jmp	fpsp_bsun
 real_bsun:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E1,E_BYTE(%a6)	|bsun is always an E1 exception
 	fmovel		%FPSR,-(%sp)
 	bclrb		#nan_bit,(%sp)
 	fmovel		(%sp)+,%FPSR
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	F-line exception
 |
 |	A 'real' F-line exception is one that the FPSP isn't supposed to
 |	handle. E.g. an instruction with a co-processor ID that is not 1.
 |
 |
 	|xref	fpsp_fline
 	.global	real_fline
 	.global	fline
 fline:
 	jmp	fpsp_fline
 real_fline:

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Unsupported data type exception
 |
 	|xref	fpsp_unsupp
 	.global	real_unsupp
 	.global	unsupp
 unsupp:
 	jmp	fpsp_unsupp
 real_unsupp:
 	link		%a6,#-LOCAL_SIZE
 	fsave		-(%sp)
 	bclrb		#E1,E_BYTE(%a6)	|unsupp is always an E1 exception
 	frestore	(%sp)+
 	unlk		%a6

 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	movel	%sp,%sp@-		| stack frame pointer argument
 	bsrl	trap_c
 	addql	#4,%sp
 	bral	ret_from_exception

 |
 |	Trace exception
 |
 	.global	real_trace
 real_trace:
 	|
 	bral	trap

 |
 |	fpsp_fmt_error --- exit point for frame format error
 |
 |	The fpu stack frame does not match the frames existing
 |	or planned at the time of this writing.  The fpsp is
 |	unable to handle frame sizes not in the following
 |	version:size pairs:
 |
 |	{4060, 4160} - busy frame
 |	{4028, 4130} - unimp frame
 |	{4000, 4100} - idle frame
 |
 |	This entry point simply holds an f-line illegal value.
 |	Replace this with a call to your kernel panic code or
 |	code to handle future revisions of the fpu.
 |
 	.global	fpsp_fmt_error
 fpsp_fmt_error:

 	.long	0xf27f0000	|f-line illegal

 |
 |	fpsp_done --- FPSP exit point
 |
 |	The exception has been handled by the package and we are ready
 |	to return to user mode, but there may be OS specific code
 |	to execute before we do.  If there is, do it now.
 |
 |

 	.global	fpsp_done
 fpsp_done:
 	btst	#0x5,%sp@		| supervisor bit set in saved SR?
 	beq	.Lnotkern
 	rte
 .Lnotkern:
 	SAVE_ALL_INT
 	GET_CURRENT(%d0)
 	| deliver signals, reschedule etc..
 	jra	ret_from_exception

 |
 |	mem_write --- write to user or supervisor address space
 |
 | Writes to memory while in supervisor mode.  copyout accomplishes
 | this via a 'moves' instruction.  copyout is a UNIX SVR3 (and later) function.
 | If you don't have copyout, use the local copy of the function below.
 |
 |	a0 - supervisor source address
 |	a1 - user destination address
 |	d0 - number of bytes to write (maximum count is 12)
 |
 | The supervisor source address is guaranteed to point into the supervisor
 | stack.  The result is that a UNIX
 | process is allowed to sleep as a consequence of a page fault during
 | copyout.  The probability of a page fault is exceedingly small because
 | the 68040 always reads the destination address and thus the page
 | faults should have already been handled.
 |
 | If the EXC_SR shows that the exception was from supervisor space,
 | then just do a dumb (and slow) memory move.  In a UNIX environment
 | there shouldn't be any supervisor mode floating point exceptions.
 |
 	.global	mem_write
 mem_write:
 	btstb	#5,EXC_SR(%a6)	|check for supervisor state
 	beqs	user_write
 super_write:
 	moveb	(%a0)+,(%a1)+
 	subql	#1,%d0
 	bnes	super_write
 	rts
 user_write:
 	movel	%d1,-(%sp)	|preserve d1 just in case
 	movel	%d0,-(%sp)
 	movel	%a1,-(%sp)
 	movel	%a0,-(%sp)
 	jsr		copyout
 	addw	#12,%sp
 	movel	(%sp)+,%d1
 	rts
 |
 |	mem_read --- read from user or supervisor address space
 |
 | Reads from memory while in supervisor mode.  copyin accomplishes
 | this via a 'moves' instruction.  copyin is a UNIX SVR3 (and later) function.
 | If you don't have copyin, use the local copy of the function below.
 |
 | The FPSP calls mem_read to read the original F-line instruction in order
 | to extract the data register number when the 'Dn' addressing mode is
 | used.
 |
 |Input:
 |	a0 - user source address
 |	a1 - supervisor destination address
 |	d0 - number of bytes to read (maximum count is 12)
 |
 | Like mem_write, mem_read always reads with a supervisor
 | destination address on the supervisor stack.  Also like mem_write,
 | the EXC_SR is checked and a simple memory copy is done if reading
 | from supervisor space is indicated.
 |
 	.global	mem_read
 mem_read:
 	btstb	#5,EXC_SR(%a6)	|check for supervisor state
 	beqs	user_read
 super_read:
 	moveb	(%a0)+,(%a1)+
 	subql	#1,%d0
 	bnes	super_read
 	rts
 user_read:
 	movel	%d1,-(%sp)	|preserve d1 just in case
 	movel	%d0,-(%sp)
 	movel	%a1,-(%sp)
 	movel	%a0,-(%sp)
 	jsr	copyin
 	addw	#12,%sp
 	movel	(%sp)+,%d1
 	rts

 |
 | Use these routines if your kernel doesn't have copyout/copyin equivalents.
 | Assumes that D0/D1/A0/A1 are scratch registers. copyout overwrites DFC,
 | and copyin overwrites SFC.
 |
 copyout:
 	movel	4(%sp),%a0	| source
 	movel	8(%sp),%a1	| destination
 	movel	12(%sp),%d0	| count
 	subl	#1,%d0		| dec count by 1 for dbra
 	movel	#1,%d1

 |	DFC is already set
 |	movec	%d1,%DFC		| set dfc for user data space
 moreout:
 	moveb	(%a0)+,%d1	| fetch supervisor byte
 out_ea:
 	movesb	%d1,(%a1)+	| write user byte
 	dbf	%d0,moreout
 	rts

 copyin:
 	movel	4(%sp),%a0	| source
 	movel	8(%sp),%a1	| destination
 	movel	12(%sp),%d0	| count
 	subl	#1,%d0		| dec count by 1 for dbra
 	movel	#1,%d1
 |	SFC is already set
 |	movec	%d1,%SFC		| set sfc for user space
 morein:
 in_ea:
 	movesb	(%a0)+,%d1	| fetch user byte
 	moveb	%d1,(%a1)+	| write supervisor byte
 	dbf	%d0,morein
 	rts

 	.section .fixup,#alloc,#execinstr
 	.even
 1:
 	jbra	fpsp040_die

 	.section __ex_table,#alloc
 	.align	4

 	.long	in_ea,1b
 	.long	out_ea,1b

 	|end
	\|
	\| skeleton.sa 3.2 4/26/91
	\|
	\| This file contains code that is system dependent and will
	\| need to be modified to install the FPSP.
	\|
	\| Each entry point for exception 'xxxx' begins with a 'jmp fpsp_xxxx'.
	\| Put any target system specific handling that must be done immediately
	\| before the jump instruction. If there no handling necessary, then
	\| the 'fpsp_xxxx' handler entry point should be placed in the exception
	\| table so that the 'jmp' can be eliminated. If the FPSP determines that the
	\| exception is one that must be reported then there will be a
	\| return from the package by a 'jmp real_xxxx'. At that point
	\| the machine state will be identical to the state before
	\| the FPSP was entered. In particular, whatever condition
	\| that caused the exception will still be pending when the FPSP
	\| package returns. Thus, there will be system specific code
	\| to handle the exception.
	\|
	\| If the exception was completely handled by the package, then
	\| the return will be via a 'jmp fpsp_done'. Unless there is
	\| OS specific work to be done (such as handling a context switch or
	\| interrupt) the user program can be resumed via 'rte'.
	\|
	\| In the following skeleton code, some typical 'real_xxxx' handling
	\| code is shown. This code may need to be moved to an appropriate
	\| place in the target system, or rewritten.
	\|

	\| Copyright (C) Motorola, Inc. 1990
	\| All Rights Reserved
	\|
	\| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
	\| The copyright notice above does not evidence any
	\| actual or intended publication of such source code.

	\|
	\| Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)
	\|

	#include <linux/linkage.h>
	#include <asm/entry.h>
	#include <asm/asm-offsets.h>

	\|SKELETON idnt 2,1 \| Motorola 040 Floating Point Software Package

	\|section 15
	\|
	\| The following counters are used for standalone testing
	\|

	\|section 8

	#include "fpsp.h"

	\|xref b1238_fix

	\|
	\| Divide by Zero exception
	\|
	\| All dz exceptions are 'real', hence no fpsp_dz entry point.
	\|
	.global dz
	.global real_dz
	dz:
	real_dz:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E1,E_BYTE(%a6)
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Inexact exception
	\|
	\| All inexact exceptions are real, but the 'real' handler
	\| will probably want to clear the pending exception.
	\| The provided code will clear the E3 exception (if pending),
	\| otherwise clear the E1 exception. The frestore is not really
	\| necessary for E1 exceptions.
	\|
	\| Code following the 'inex' label is to handle bug #1232. In this
	\| bug, if an E1 snan, ovfl, or unfl occurred, and the process was
	\| swapped out before taking the exception, the exception taken on
	\| return was inex, rather than the correct exception. The snan, ovfl,
	\| and unfl exception to be taken must not have been enabled. The
	\| fix is to check for E1, and the existence of one of snan, ovfl,
	\| or unfl bits set in the fpsr. If any of these are set, branch
	\| to the appropriate handler for the exception in the fpsr. Note
	\| that this fix is only for d43b parts, and is skipped if the
	\| version number is not $40.
	\|
	\|
	.global real_inex
	.global inex
	inex:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	cmpib #VER_40,(%sp) \|test version number
	bnes not_fmt40
	fmovel %fpsr,-(%sp)
	btstb #E1,E_BYTE(%a6) \|test for E1 set
	beqs not_b1232
	btstb #snan_bit,2(%sp) \|test for snan
	beq inex_ckofl
	addl #4,%sp
	frestore (%sp)+
	unlk %a6
	bra snan
	inex_ckofl:
	btstb #ovfl_bit,2(%sp) \|test for ovfl
	beq inex_ckufl
	addl #4,%sp
	frestore (%sp)+
	unlk %a6
	bra ovfl
	inex_ckufl:
	btstb #unfl_bit,2(%sp) \|test for unfl
	beq not_b1232
	addl #4,%sp
	frestore (%sp)+
	unlk %a6
	bra unfl

	\|
	\| We do not have the bug 1232 case. Clean up the stack and call
	\| real_inex.
	\|
	not_b1232:
	addl #4,%sp
	frestore (%sp)+
	unlk %a6

	real_inex:

	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	not_fmt40:
	bclrb #E3,E_BYTE(%a6) \|clear and test E3 flag
	beqs inex_cke1
	\|
	\| Clear dirty bit on dest resister in the frame before branching
	\| to b1238_fix.
	\|
	moveml %d0/%d1,USER_DA(%a6)
	bfextu CMDREG1B(%a6){#6:#3},%d0 \|get dest reg no
	bclrb %d0,FPR_DIRTY_BITS(%a6) \|clr dest dirty bit
	bsrl b1238_fix \|test for bug1238 case
	moveml USER_DA(%a6),%d0/%d1
	bras inex_done
	inex_cke1:
	bclrb #E1,E_BYTE(%a6)
	inex_done:
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Overflow exception
	\|
	\|xref fpsp_ovfl
	.global real_ovfl
	.global ovfl
	ovfl:
	jmp fpsp_ovfl
	real_ovfl:

	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E3,E_BYTE(%a6) \|clear and test E3 flag
	bnes ovfl_done
	bclrb #E1,E_BYTE(%a6)
	ovfl_done:
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Underflow exception
	\|
	\|xref fpsp_unfl
	.global real_unfl
	.global unfl
	unfl:
	jmp fpsp_unfl
	real_unfl:

	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E3,E_BYTE(%a6) \|clear and test E3 flag
	bnes unfl_done
	bclrb #E1,E_BYTE(%a6)
	unfl_done:
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Signalling NAN exception
	\|
	\|xref fpsp_snan
	.global real_snan
	.global snan
	snan:
	jmp fpsp_snan
	real_snan:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E1,E_BYTE(%a6) \|snan is always an E1 exception
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Operand Error exception
	\|
	\|xref fpsp_operr
	.global real_operr
	.global operr
	operr:
	jmp fpsp_operr
	real_operr:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E1,E_BYTE(%a6) \|operr is always an E1 exception
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception


	\|
	\| BSUN exception
	\|
	\| This sample handler simply clears the nan bit in the FPSR.
	\|
	\|xref fpsp_bsun
	.global real_bsun
	.global bsun
	bsun:
	jmp fpsp_bsun
	real_bsun:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E1,E_BYTE(%a6) \|bsun is always an E1 exception
	fmovel %FPSR,-(%sp)
	bclrb #nan_bit,(%sp)
	fmovel (%sp)+,%FPSR
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| F-line exception
	\|
	\| A 'real' F-line exception is one that the FPSP isn't supposed to
	\| handle. E.g. an instruction with a co-processor ID that is not 1.
	\|
	\|
	\|xref fpsp_fline
	.global real_fline
	.global fline
	fline:
	jmp fpsp_fline
	real_fline:

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Unsupported data type exception
	\|
	\|xref fpsp_unsupp
	.global real_unsupp
	.global unsupp
	unsupp:
	jmp fpsp_unsupp
	real_unsupp:
	link %a6,#-LOCAL_SIZE
	fsave -(%sp)
	bclrb #E1,E_BYTE(%a6) \|unsupp is always an E1 exception
	frestore (%sp)+
	unlk %a6

	SAVE_ALL_INT
	GET_CURRENT(%d0)
	movel %sp,%sp@- \| stack frame pointer argument
	bsrl trap_c
	addql #4,%sp
	bral ret_from_exception

	\|
	\| Trace exception
	\|
	.global real_trace
	real_trace:
	\|
	bral trap

	\|
	\| fpsp_fmt_error --- exit point for frame format error
	\|
	\| The fpu stack frame does not match the frames existing
	\| or planned at the time of this writing. The fpsp is
	\| unable to handle frame sizes not in the following
	\| version:size pairs:
	\|
	\| {4060, 4160} - busy frame
	\| {4028, 4130} - unimp frame
	\| {4000, 4100} - idle frame
	\|
	\| This entry point simply holds an f-line illegal value.
	\| Replace this with a call to your kernel panic code or
	\| code to handle future revisions of the fpu.
	\|
	.global fpsp_fmt_error
	fpsp_fmt_error:

	.long 0xf27f0000 \|f-line illegal

	\|
	\| fpsp_done --- FPSP exit point
	\|
	\| The exception has been handled by the package and we are ready
	\| to return to user mode, but there may be OS specific code
	\| to execute before we do. If there is, do it now.
	\|
	\|

	.global fpsp_done
	fpsp_done:
	btst #0x5,%sp@ \| supervisor bit set in saved SR?
	beq .Lnotkern
	rte
	.Lnotkern:
	SAVE_ALL_INT
	GET_CURRENT(%d0)
	\| deliver signals, reschedule etc..
	jra ret_from_exception

	\|
	\| mem_write --- write to user or supervisor address space
	\|
	\| Writes to memory while in supervisor mode. copyout accomplishes
	\| this via a 'moves' instruction. copyout is a UNIX SVR3 (and later) function.
	\| If you don't have copyout, use the local copy of the function below.
	\|
	\| a0 - supervisor source address
	\| a1 - user destination address
	\| d0 - number of bytes to write (maximum count is 12)
	\|
	\| The supervisor source address is guaranteed to point into the supervisor
	\| stack. The result is that a UNIX
	\| process is allowed to sleep as a consequence of a page fault during
	\| copyout. The probability of a page fault is exceedingly small because
	\| the 68040 always reads the destination address and thus the page
	\| faults should have already been handled.
	\|
	\| If the EXC_SR shows that the exception was from supervisor space,
	\| then just do a dumb (and slow) memory move. In a UNIX environment
	\| there shouldn't be any supervisor mode floating point exceptions.
	\|
	.global mem_write
	mem_write:
	btstb #5,EXC_SR(%a6) \|check for supervisor state
	beqs user_write
	super_write:
	moveb (%a0)+,(%a1)+
	subql #1,%d0
	bnes super_write
	rts
	user_write:
	movel %d1,-(%sp) \|preserve d1 just in case
	movel %d0,-(%sp)
	movel %a1,-(%sp)
	movel %a0,-(%sp)
	jsr copyout
	addw #12,%sp
	movel (%sp)+,%d1
	rts
	\|
	\| mem_read --- read from user or supervisor address space
	\|
	\| Reads from memory while in supervisor mode. copyin accomplishes
	\| this via a 'moves' instruction. copyin is a UNIX SVR3 (and later) function.
	\| If you don't have copyin, use the local copy of the function below.
	\|
	\| The FPSP calls mem_read to read the original F-line instruction in order
	\| to extract the data register number when the 'Dn' addressing mode is
	\| used.
	\|
	\|Input:
	\| a0 - user source address
	\| a1 - supervisor destination address
	\| d0 - number of bytes to read (maximum count is 12)
	\|
	\| Like mem_write, mem_read always reads with a supervisor
	\| destination address on the supervisor stack. Also like mem_write,
	\| the EXC_SR is checked and a simple memory copy is done if reading
	\| from supervisor space is indicated.
	\|
	.global mem_read
	mem_read:
	btstb #5,EXC_SR(%a6) \|check for supervisor state
	beqs user_read
	super_read:
	moveb (%a0)+,(%a1)+
	subql #1,%d0
	bnes super_read
	rts
	user_read:
	movel %d1,-(%sp) \|preserve d1 just in case
	movel %d0,-(%sp)
	movel %a1,-(%sp)
	movel %a0,-(%sp)
	jsr copyin
	addw #12,%sp
	movel (%sp)+,%d1
	rts

	\|
	\| Use these routines if your kernel doesn't have copyout/copyin equivalents.
	\| Assumes that D0/D1/A0/A1 are scratch registers. copyout overwrites DFC,
	\| and copyin overwrites SFC.
	\|
	copyout:
	movel 4(%sp),%a0 \| source
	movel 8(%sp),%a1 \| destination
	movel 12(%sp),%d0 \| count
	subl #1,%d0 \| dec count by 1 for dbra
	movel #1,%d1

	\| DFC is already set
	\| movec %d1,%DFC \| set dfc for user data space
	moreout:
	moveb (%a0)+,%d1 \| fetch supervisor byte
	out_ea:
	movesb %d1,(%a1)+ \| write user byte
	dbf %d0,moreout
	rts

	copyin:
	movel 4(%sp),%a0 \| source
	movel 8(%sp),%a1 \| destination
	movel 12(%sp),%d0 \| count
	subl #1,%d0 \| dec count by 1 for dbra
	movel #1,%d1
	\| SFC is already set
	\| movec %d1,%SFC \| set sfc for user space
	morein:
	in_ea:
	movesb (%a0)+,%d1 \| fetch user byte
	moveb %d1,(%a1)+ \| write supervisor byte
	dbf %d0,morein
	rts

	.section .fixup,#alloc,#execinstr
	.even
	1:
	jbra fpsp040_die

	.section __ex_table,#alloc
	.align 4

	.long in_ea,1b
	.long out_ea,1b

	\|end