| /* |
| * net/tipc/config.c: TIPC configuration management code |
| * |
| * Copyright (c) 2002-2006, Ericsson AB |
| * Copyright (c) 2004-2007, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "core.h" |
| #include "dbg.h" |
| #include "bearer.h" |
| #include "port.h" |
| #include "link.h" |
| #include "zone.h" |
| #include "addr.h" |
| #include "name_table.h" |
| #include "node.h" |
| #include "config.h" |
| #include "discover.h" |
| |
| struct subscr_data { |
| char usr_handle[8]; |
| u32 domain; |
| u32 port_ref; |
| struct list_head subd_list; |
| }; |
| |
| struct manager { |
| u32 user_ref; |
| u32 port_ref; |
| }; |
| |
| static struct manager mng = { 0}; |
| |
| static DEFINE_SPINLOCK(config_lock); |
| |
| static const void *req_tlv_area; /* request message TLV area */ |
| static int req_tlv_space; /* request message TLV area size */ |
| static int rep_headroom; /* reply message headroom to use */ |
| |
| |
| struct sk_buff *tipc_cfg_reply_alloc(int payload_size) |
| { |
| struct sk_buff *buf; |
| |
| buf = alloc_skb(rep_headroom + payload_size, GFP_ATOMIC); |
| if (buf) |
| skb_reserve(buf, rep_headroom); |
| return buf; |
| } |
| |
| int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type, |
| void *tlv_data, int tlv_data_size) |
| { |
| struct tlv_desc *tlv = (struct tlv_desc *)skb_tail_pointer(buf); |
| int new_tlv_space = TLV_SPACE(tlv_data_size); |
| |
| if (skb_tailroom(buf) < new_tlv_space) { |
| dbg("tipc_cfg_append_tlv unable to append TLV\n"); |
| return 0; |
| } |
| skb_put(buf, new_tlv_space); |
| tlv->tlv_type = htons(tlv_type); |
| tlv->tlv_len = htons(TLV_LENGTH(tlv_data_size)); |
| if (tlv_data_size && tlv_data) |
| memcpy(TLV_DATA(tlv), tlv_data, tlv_data_size); |
| return 1; |
| } |
| |
| struct sk_buff *tipc_cfg_reply_unsigned_type(u16 tlv_type, u32 value) |
| { |
| struct sk_buff *buf; |
| __be32 value_net; |
| |
| buf = tipc_cfg_reply_alloc(TLV_SPACE(sizeof(value))); |
| if (buf) { |
| value_net = htonl(value); |
| tipc_cfg_append_tlv(buf, tlv_type, &value_net, |
| sizeof(value_net)); |
| } |
| return buf; |
| } |
| |
| struct sk_buff *tipc_cfg_reply_string_type(u16 tlv_type, char *string) |
| { |
| struct sk_buff *buf; |
| int string_len = strlen(string) + 1; |
| |
| buf = tipc_cfg_reply_alloc(TLV_SPACE(string_len)); |
| if (buf) |
| tipc_cfg_append_tlv(buf, tlv_type, string, string_len); |
| return buf; |
| } |
| |
| #define MAX_STATS_INFO 2000 |
| |
| static struct sk_buff *tipc_show_stats(void) |
| { |
| struct sk_buff *buf; |
| struct tlv_desc *rep_tlv; |
| struct print_buf pb; |
| int str_len; |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| value = ntohl(*(u32 *)TLV_DATA(req_tlv_area)); |
| if (value != 0) |
| return tipc_cfg_reply_error_string("unsupported argument"); |
| |
| buf = tipc_cfg_reply_alloc(TLV_SPACE(MAX_STATS_INFO)); |
| if (buf == NULL) |
| return NULL; |
| |
| rep_tlv = (struct tlv_desc *)buf->data; |
| tipc_printbuf_init(&pb, (char *)TLV_DATA(rep_tlv), MAX_STATS_INFO); |
| |
| tipc_printf(&pb, "TIPC version " TIPC_MOD_VER "\n"); |
| |
| /* Use additional tipc_printf()'s to return more info ... */ |
| |
| str_len = tipc_printbuf_validate(&pb); |
| skb_put(buf, TLV_SPACE(str_len)); |
| TLV_SET(rep_tlv, TIPC_TLV_ULTRA_STRING, NULL, str_len); |
| |
| return buf; |
| } |
| |
| static struct sk_buff *cfg_enable_bearer(void) |
| { |
| struct tipc_bearer_config *args; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_CONFIG)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| args = (struct tipc_bearer_config *)TLV_DATA(req_tlv_area); |
| if (tipc_enable_bearer(args->name, |
| ntohl(args->detect_scope), |
| ntohl(args->priority))) |
| return tipc_cfg_reply_error_string("unable to enable bearer"); |
| |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_disable_bearer(void) |
| { |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_BEARER_NAME)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| if (tipc_disable_bearer((char *)TLV_DATA(req_tlv_area))) |
| return tipc_cfg_reply_error_string("unable to disable bearer"); |
| |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_own_addr(void) |
| { |
| u32 addr; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_NET_ADDR)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| addr = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (addr == tipc_own_addr) |
| return tipc_cfg_reply_none(); |
| if (!tipc_addr_node_valid(addr)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (node address)"); |
| if (tipc_mode == TIPC_NET_MODE) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot change node address once assigned)"); |
| |
| /* |
| * Must release all spinlocks before calling start_net() because |
| * Linux version of TIPC calls eth_media_start() which calls |
| * register_netdevice_notifier() which may block! |
| * |
| * Temporarily releasing the lock should be harmless for non-Linux TIPC, |
| * but Linux version of eth_media_start() should really be reworked |
| * so that it can be called with spinlocks held. |
| */ |
| |
| spin_unlock_bh(&config_lock); |
| tipc_core_start_net(addr); |
| spin_lock_bh(&config_lock); |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_remote_mng(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| tipc_remote_management = (value != 0); |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_publications(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value != delimit(value, 1, 65535)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max publications must be 1-65535)"); |
| tipc_max_publications = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_subscriptions(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value != delimit(value, 1, 65535)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max subscriptions must be 1-65535"); |
| tipc_max_subscriptions = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_ports(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value == tipc_max_ports) |
| return tipc_cfg_reply_none(); |
| if (value != delimit(value, 127, 65535)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max ports must be 127-65535)"); |
| if (tipc_mode != TIPC_NOT_RUNNING) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot change max ports while TIPC is active)"); |
| tipc_max_ports = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_zones(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value == tipc_max_zones) |
| return tipc_cfg_reply_none(); |
| if (value != delimit(value, 1, 255)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max zones must be 1-255)"); |
| if (tipc_mode == TIPC_NET_MODE) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot change max zones once TIPC has joined a network)"); |
| tipc_max_zones = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_clusters(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value != delimit(value, 1, 1)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max clusters fixed at 1)"); |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_nodes(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value == tipc_max_nodes) |
| return tipc_cfg_reply_none(); |
| if (value != delimit(value, 8, 2047)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (max nodes must be 8-2047)"); |
| if (tipc_mode == TIPC_NET_MODE) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot change max nodes once TIPC has joined a network)"); |
| tipc_max_nodes = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_max_slaves(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value != 0) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (max secondary nodes fixed at 0)"); |
| return tipc_cfg_reply_none(); |
| } |
| |
| static struct sk_buff *cfg_set_netid(void) |
| { |
| u32 value; |
| |
| if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); |
| value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area)); |
| if (value == tipc_net_id) |
| return tipc_cfg_reply_none(); |
| if (value != delimit(value, 1, 9999)) |
| return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE |
| " (network id must be 1-9999)"); |
| if (tipc_mode == TIPC_NET_MODE) |
| return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot change network id once TIPC has joined a network)"); |
| tipc_net_id = value; |
| return tipc_cfg_reply_none(); |
| } |
| |
| struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area, |
| int request_space, int reply_headroom) |
| { |
| struct sk_buff *rep_tlv_buf; |
| |
| spin_lock_bh(&config_lock); |
| |
| /* Save request and reply details in a well-known location */ |
| |
| req_tlv_area = request_area; |
| req_tlv_space = request_space; |
| rep_headroom = reply_headroom; |
| |
| /* Check command authorization */ |
| |
| if (likely(orig_node == tipc_own_addr)) { |
| /* command is permitted */ |
| } else if (cmd >= 0x8000) { |
| rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (cannot be done remotely)"); |
| goto exit; |
| } else if (!tipc_remote_management) { |
| rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NO_REMOTE); |
| goto exit; |
| } |
| else if (cmd >= 0x4000) { |
| u32 domain = 0; |
| |
| if ((tipc_nametbl_translate(TIPC_ZM_SRV, 0, &domain) == 0) || |
| (domain != orig_node)) { |
| rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_ZONE_MSTR); |
| goto exit; |
| } |
| } |
| |
| /* Call appropriate processing routine */ |
| |
| switch (cmd) { |
| case TIPC_CMD_NOOP: |
| rep_tlv_buf = tipc_cfg_reply_none(); |
| break; |
| case TIPC_CMD_GET_NODES: |
| rep_tlv_buf = tipc_node_get_nodes(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_GET_LINKS: |
| rep_tlv_buf = tipc_node_get_links(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_SHOW_LINK_STATS: |
| rep_tlv_buf = tipc_link_cmd_show_stats(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_RESET_LINK_STATS: |
| rep_tlv_buf = tipc_link_cmd_reset_stats(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_SHOW_NAME_TABLE: |
| rep_tlv_buf = tipc_nametbl_get(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_GET_BEARER_NAMES: |
| rep_tlv_buf = tipc_bearer_get_names(); |
| break; |
| case TIPC_CMD_GET_MEDIA_NAMES: |
| rep_tlv_buf = tipc_media_get_names(); |
| break; |
| case TIPC_CMD_SHOW_PORTS: |
| rep_tlv_buf = tipc_port_get_ports(); |
| break; |
| case TIPC_CMD_SET_LOG_SIZE: |
| rep_tlv_buf = tipc_log_resize_cmd(req_tlv_area, req_tlv_space); |
| break; |
| case TIPC_CMD_DUMP_LOG: |
| rep_tlv_buf = tipc_log_dump(); |
| break; |
| case TIPC_CMD_SHOW_STATS: |
| rep_tlv_buf = tipc_show_stats(); |
| break; |
| case TIPC_CMD_SET_LINK_TOL: |
| case TIPC_CMD_SET_LINK_PRI: |
| case TIPC_CMD_SET_LINK_WINDOW: |
| rep_tlv_buf = tipc_link_cmd_config(req_tlv_area, req_tlv_space, cmd); |
| break; |
| case TIPC_CMD_ENABLE_BEARER: |
| rep_tlv_buf = cfg_enable_bearer(); |
| break; |
| case TIPC_CMD_DISABLE_BEARER: |
| rep_tlv_buf = cfg_disable_bearer(); |
| break; |
| case TIPC_CMD_SET_NODE_ADDR: |
| rep_tlv_buf = cfg_set_own_addr(); |
| break; |
| case TIPC_CMD_SET_REMOTE_MNG: |
| rep_tlv_buf = cfg_set_remote_mng(); |
| break; |
| case TIPC_CMD_SET_MAX_PORTS: |
| rep_tlv_buf = cfg_set_max_ports(); |
| break; |
| case TIPC_CMD_SET_MAX_PUBL: |
| rep_tlv_buf = cfg_set_max_publications(); |
| break; |
| case TIPC_CMD_SET_MAX_SUBSCR: |
| rep_tlv_buf = cfg_set_max_subscriptions(); |
| break; |
| case TIPC_CMD_SET_MAX_ZONES: |
| rep_tlv_buf = cfg_set_max_zones(); |
| break; |
| case TIPC_CMD_SET_MAX_CLUSTERS: |
| rep_tlv_buf = cfg_set_max_clusters(); |
| break; |
| case TIPC_CMD_SET_MAX_NODES: |
| rep_tlv_buf = cfg_set_max_nodes(); |
| break; |
| case TIPC_CMD_SET_MAX_SLAVES: |
| rep_tlv_buf = cfg_set_max_slaves(); |
| break; |
| case TIPC_CMD_SET_NETID: |
| rep_tlv_buf = cfg_set_netid(); |
| break; |
| case TIPC_CMD_GET_REMOTE_MNG: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_remote_management); |
| break; |
| case TIPC_CMD_GET_MAX_PORTS: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_ports); |
| break; |
| case TIPC_CMD_GET_MAX_PUBL: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_publications); |
| break; |
| case TIPC_CMD_GET_MAX_SUBSCR: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_subscriptions); |
| break; |
| case TIPC_CMD_GET_MAX_ZONES: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_zones); |
| break; |
| case TIPC_CMD_GET_MAX_CLUSTERS: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_clusters); |
| break; |
| case TIPC_CMD_GET_MAX_NODES: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_nodes); |
| break; |
| case TIPC_CMD_GET_MAX_SLAVES: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_slaves); |
| break; |
| case TIPC_CMD_GET_NETID: |
| rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id); |
| break; |
| case TIPC_CMD_NOT_NET_ADMIN: |
| rep_tlv_buf = |
| tipc_cfg_reply_error_string(TIPC_CFG_NOT_NET_ADMIN); |
| break; |
| default: |
| rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED |
| " (unknown command)"); |
| break; |
| } |
| |
| /* Return reply buffer */ |
| exit: |
| spin_unlock_bh(&config_lock); |
| return rep_tlv_buf; |
| } |
| |
| static void cfg_named_msg_event(void *userdata, |
| u32 port_ref, |
| struct sk_buff **buf, |
| const unchar *msg, |
| u32 size, |
| u32 importance, |
| struct tipc_portid const *orig, |
| struct tipc_name_seq const *dest) |
| { |
| struct tipc_cfg_msg_hdr *req_hdr; |
| struct tipc_cfg_msg_hdr *rep_hdr; |
| struct sk_buff *rep_buf; |
| |
| /* Validate configuration message header (ignore invalid message) */ |
| |
| req_hdr = (struct tipc_cfg_msg_hdr *)msg; |
| if ((size < sizeof(*req_hdr)) || |
| (size != TCM_ALIGN(ntohl(req_hdr->tcm_len))) || |
| (ntohs(req_hdr->tcm_flags) != TCM_F_REQUEST)) { |
| warn("Invalid configuration message discarded\n"); |
| return; |
| } |
| |
| /* Generate reply for request (if can't, return request) */ |
| |
| rep_buf = tipc_cfg_do_cmd(orig->node, |
| ntohs(req_hdr->tcm_type), |
| msg + sizeof(*req_hdr), |
| size - sizeof(*req_hdr), |
| BUF_HEADROOM + MAX_H_SIZE + sizeof(*rep_hdr)); |
| if (rep_buf) { |
| skb_push(rep_buf, sizeof(*rep_hdr)); |
| rep_hdr = (struct tipc_cfg_msg_hdr *)rep_buf->data; |
| memcpy(rep_hdr, req_hdr, sizeof(*rep_hdr)); |
| rep_hdr->tcm_len = htonl(rep_buf->len); |
| rep_hdr->tcm_flags &= htons(~TCM_F_REQUEST); |
| } else { |
| rep_buf = *buf; |
| *buf = NULL; |
| } |
| |
| /* NEED TO ADD CODE TO HANDLE FAILED SEND (SUCH AS CONGESTION) */ |
| tipc_send_buf2port(port_ref, orig, rep_buf, rep_buf->len); |
| } |
| |
| int tipc_cfg_init(void) |
| { |
| struct tipc_name_seq seq; |
| int res; |
| |
| res = tipc_attach(&mng.user_ref, NULL, NULL); |
| if (res) |
| goto failed; |
| |
| res = tipc_createport(mng.user_ref, NULL, TIPC_CRITICAL_IMPORTANCE, |
| NULL, NULL, NULL, |
| NULL, cfg_named_msg_event, NULL, |
| NULL, &mng.port_ref); |
| if (res) |
| goto failed; |
| |
| seq.type = TIPC_CFG_SRV; |
| seq.lower = seq.upper = tipc_own_addr; |
| res = tipc_nametbl_publish_rsv(mng.port_ref, TIPC_ZONE_SCOPE, &seq); |
| if (res) |
| goto failed; |
| |
| return 0; |
| |
| failed: |
| err("Unable to create configuration service\n"); |
| tipc_detach(mng.user_ref); |
| mng.user_ref = 0; |
| return res; |
| } |
| |
| void tipc_cfg_stop(void) |
| { |
| if (mng.user_ref) { |
| tipc_detach(mng.user_ref); |
| mng.user_ref = 0; |
| } |
| } |