| /* |
| * Qualcomm USB Auxiliary Serial Port driver |
| * |
| * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com> |
| * Copyright (C) 2010 Dan Williams <dcbw@redhat.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Devices listed here usually provide a CDC ACM port on which normal modem |
| * AT commands and PPP can be used. But when that port is in-use by PPP it |
| * cannot be used simultaneously for status or signal strength. Instead, the |
| * ports here can be queried for that information using the Qualcomm DM |
| * protocol. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/tty.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| |
| /* NOTE: for now, only use this driver for devices that provide a CDC-ACM port |
| * for normal AT commands, but also provide secondary USB interfaces for the |
| * QCDM-capable ports. Devices that do not provide a CDC-ACM port should |
| * probably be driven by option.ko. |
| */ |
| |
| /* UTStarcom/Pantech/Curitel devices */ |
| #define UTSTARCOM_VENDOR_ID 0x106c |
| #define UTSTARCOM_PRODUCT_PC5740 0x3701 |
| #define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */ |
| #define UTSTARCOM_PRODUCT_UM150 0x3711 |
| #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 |
| #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 |
| #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 |
| #define PANTECH_PRODUCT_UML190_VZW 0x3716 |
| #define PANTECH_PRODUCT_UML290_VZW 0x3718 |
| |
| /* CMOTECH devices */ |
| #define CMOTECH_VENDOR_ID 0x16d8 |
| #define CMOTECH_PRODUCT_CDU550 0x5553 |
| #define CMOTECH_PRODUCT_CDX650 0x6512 |
| |
| /* LG devices */ |
| #define LG_VENDOR_ID 0x1004 |
| #define LG_PRODUCT_VX4400_6000 0x6000 /* VX4400/VX6000/Rumor */ |
| |
| /* Sanyo devices */ |
| #define SANYO_VENDOR_ID 0x0474 |
| #define SANYO_PRODUCT_KATANA_LX 0x0754 /* SCP-3800 (Katana LX) */ |
| |
| /* Samsung devices */ |
| #define SAMSUNG_VENDOR_ID 0x04e8 |
| #define SAMSUNG_PRODUCT_U520 0x6640 /* SCH-U520 */ |
| |
| static struct usb_device_id id_table[] = { |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ |
| { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static struct usb_driver qcaux_driver = { |
| .name = "qcaux", |
| .probe = usb_serial_probe, |
| .disconnect = usb_serial_disconnect, |
| .id_table = id_table, |
| }; |
| |
| static struct usb_serial_driver qcaux_device = { |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "qcaux", |
| }, |
| .id_table = id_table, |
| .num_ports = 1, |
| }; |
| |
| static struct usb_serial_driver * const serial_drivers[] = { |
| &qcaux_device, NULL |
| }; |
| |
| module_usb_serial_driver(qcaux_driver, serial_drivers); |
| MODULE_LICENSE("GPL"); |