blob: bee526f4d1af7c94bf65fe11aaec08be3c0f8c85 [file] [log] [blame]
/***************************************************************************/
/*
* linux/arch/m68knommu/platform/528x/config.c
*
* Sub-architcture dependant initialization code for the Motorola
* 5280 and 5282 CPUs.
*
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
#endif
/***************************************************************************/
void coldfire_reset(void);
/***************************************************************************/
static struct mcf_platform_uart m528x_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART0 + 2,
},
{ },
};
static struct platform_device m528x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m528x_uart_platform,
};
static struct resource m528x_fec_resources[] = {
{
.start = MCF_MBAR + 0x1000,
.end = MCF_MBAR + 0x1000 + 0x7ff,
.flags = IORESOURCE_MEM,
},
{
.start = 64 + 23,
.end = 64 + 23,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 27,
.end = 64 + 27,
.flags = IORESOURCE_IRQ,
},
{
.start = 64 + 29,
.end = 64 + 29,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device m528x_fec = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(m528x_fec_resources),
.resource = m528x_fec_resources,
};
static struct platform_device *m528x_devices[] __initdata = {
&m528x_uart,
&m528x_fec,
};
/***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m528x_uart_init_line(int line, int irq)
{
u8 port;
u32 imr;
if ((line < 0) || (line > 2))
return;
/* level 6, line based priority */
writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
/* make sure PUAPAR is set for UART0 and UART1 */
if (line < 2) {
port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
port |= (0x03 << (line * 2));
writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
}
}
static void __init m528x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m528x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m528x_uart_init_line(line, m528x_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m528x_fec_init(void)
{
u32 imr;
u16 v16;
/* Unmask FEC interrupts at ColdFire interrupt controller */
writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr &= ~0xf;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
imr &= ~0xff800001;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
/* Set multi-function pins to ethernet mode for fec0 */
v16 = readw(MCF_IPSBAR + 0x100056);
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
writeb(0xc0, MCF_IPSBAR + 0x100058);
}
/***************************************************************************/
void mcf_disableall(void)
{
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
}
/***************************************************************************/
void mcf_autovector(unsigned int vec)
{
/* Everything is auto-vectored on the 5272 */
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE
void wildfire_halt(void)
{
writeb(0, 0x30000007);
writeb(0x2, 0x30000007);
}
#endif
#ifdef CONFIG_WILDFIREMOD
void wildfiremod_halt(void)
{
printk(KERN_INFO "WildFireMod hibernating...\n");
/* Set portE.5 to Digital IO */
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
/* Make portE.5 an output */
MCF5282_GPIO_DDRE |= (1 << 5);
/* Now toggle portE.5 from low to high */
MCF5282_GPIO_PORTE &= ~(1 << 5);
MCF5282_GPIO_PORTE |= (1 << 5);
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
}
#endif
void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
#ifdef CONFIG_WILDFIRE
mach_halt = wildfire_halt;
#endif
#ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt;
#endif
}
/***************************************************************************/
static int __init init_BSP(void)
{
m528x_uarts_init();
m528x_fec_init();
platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/