| /* |
| * Copyright (c) 1997-2000 LAN Media Corporation (LMC) |
| * All rights reserved. www.lanmedia.com |
| * |
| * This code is written by: |
| * Andrew Stanley-Jones (asj@cban.com) |
| * Rob Braun (bbraun@vix.com), |
| * Michael Graff (explorer@vix.com) and |
| * Matt Thomas (matt@3am-software.com). |
| * |
| * With Help By: |
| * David Boggs |
| * Ron Crane |
| * Allan Cox |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License version 2, incorporated herein by reference. |
| * |
| * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ptrace.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/in.h> |
| #include <linux/if_arp.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/inet.h> |
| #include <linux/workqueue.h> |
| #include <linux/proc_fs.h> |
| #include <linux/bitops.h> |
| #include <asm/processor.h> /* Processor type for cache alignment. */ |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <linux/smp.h> |
| |
| #include "lmc.h" |
| #include "lmc_var.h" |
| #include "lmc_debug.h" |
| #include "lmc_ioctl.h" |
| #include "lmc_proto.h" |
| |
| // attach |
| void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ |
| { |
| lmc_trace(sc->lmc_device, "lmc_proto_attach in"); |
| switch(sc->if_type){ |
| case LMC_PPP: |
| { |
| struct net_device *dev = sc->lmc_device; |
| dev->do_ioctl = lmc_ioctl; |
| } |
| break; |
| case LMC_NET: |
| { |
| struct net_device *dev = sc->lmc_device; |
| /* |
| * They set a few basics because they don't use HDLC |
| */ |
| dev->flags |= IFF_POINTOPOINT; |
| |
| dev->hard_header_len = 0; |
| dev->addr_len = 0; |
| } |
| case LMC_RAW: /* Setup the task queue, maybe we should notify someone? */ |
| { |
| } |
| default: |
| break; |
| } |
| lmc_trace(sc->lmc_device, "lmc_proto_attach out"); |
| } |
| |
| int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) |
| { |
| lmc_trace(sc->lmc_device, "lmc_proto_ioctl"); |
| if (sc->if_type == LMC_PPP) |
| return hdlc_ioctl(sc->lmc_device, ifr, cmd); |
| return -EOPNOTSUPP; |
| } |
| |
| int lmc_proto_open(lmc_softc_t *sc) |
| { |
| int ret = 0; |
| |
| lmc_trace(sc->lmc_device, "lmc_proto_open in"); |
| |
| if (sc->if_type == LMC_PPP) { |
| ret = hdlc_open(sc->lmc_device); |
| if (ret < 0) |
| printk(KERN_WARNING "%s: HDLC open failed: %d\n", |
| sc->name, ret); |
| } |
| |
| lmc_trace(sc->lmc_device, "lmc_proto_open out"); |
| return ret; |
| } |
| |
| void lmc_proto_close(lmc_softc_t *sc) |
| { |
| lmc_trace(sc->lmc_device, "lmc_proto_close in"); |
| |
| if (sc->if_type == LMC_PPP) |
| hdlc_close(sc->lmc_device); |
| |
| lmc_trace(sc->lmc_device, "lmc_proto_close out"); |
| } |
| |
| __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ |
| { |
| lmc_trace(sc->lmc_device, "lmc_proto_type in"); |
| switch(sc->if_type){ |
| case LMC_PPP: |
| return hdlc_type_trans(skb, sc->lmc_device); |
| break; |
| case LMC_NET: |
| return htons(ETH_P_802_2); |
| break; |
| case LMC_RAW: /* Packet type for skbuff kind of useless */ |
| return htons(ETH_P_802_2); |
| break; |
| default: |
| printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name); |
| return htons(ETH_P_802_2); |
| break; |
| } |
| lmc_trace(sc->lmc_device, "lmc_proto_tye out"); |
| |
| } |
| |
| void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ |
| { |
| lmc_trace(sc->lmc_device, "lmc_proto_netif in"); |
| switch(sc->if_type){ |
| case LMC_PPP: |
| case LMC_NET: |
| default: |
| netif_rx(skb); |
| break; |
| case LMC_RAW: |
| break; |
| } |
| lmc_trace(sc->lmc_device, "lmc_proto_netif out"); |
| } |